[SOLVED] Bluetooth controls on OGST kit running OGST os, Lakka 2nd

[auriuman78]

Cannot get a successful pairing and connection using Bluetooth Xbox one controller or a ps4 dual shock 4 controller.

I purchased the OGST kit for xu4 asking with an xu4. Using the odroid recommended power supply and Bluetooth adapter https://ameridroid.com/products/usb-blu ... a08d&_ss=r.

Using Bluetoothctl first on OGST then on Lakka, I cannot get a successful pair and connection. It will initially pair and connect but then a few seconds later it disconnects.

On both OGST and Lakka I did invoke the recommended fix for wireless BT controller, disable property ertm by echoing y into sys folder for Bluetooth property disable_ertm.

Steps I followed after ertm fix:
1. Bluetoothctl <enter>
Comes up with message "agent registered"
2. Default-agent <enter>
3. Power on <enter>
4. Discoverable on <enter>
5. Pairable on <enter>
6. Scan on <enter>
a. Controller in pair mode
b. Note controller mac
7. Trust Mac <enter>
8. Pair Mac <enter>
9. Connect Mac <enter>
a. This is the step that fails. All others say ok, good or succeeded. It connects briefly, 2-3 sec, then disconnects.

[auriuman78]

I'm afraid I've fallen for a rookie pitfall. The documentation clearly states, as the first steps no less, to connect the controller by USB to the xu4.

Following this procedure then comes all the Bluetooth stuff, but only if the controller doesn't auto pair on its own.

I'm skipping the wired connection... I'm certain this will solve my issue and will report back with a confirmation.

[auriuman78]

Just a report back -- this issue was solved after I followed the first part of the written instructions. No problems.