one xu4 can't boot, another works well

Post Reply
nantiangumo
Posts: 3
Joined: Tue Sep 17, 2019 8:55 pm
languages_spoken: english
ODROIDs: odroid-xu4
Has thanked: 0
Been thanked: 0
Contact:

one xu4 can't boot, another works well

Post by nantiangumo »

Hi author,
Just now i measure some signals on the failed xu4.The real situation is :
1, RTC is ok, nets XTI, XTO is measured frequency 32.7672KHz.
2, VDD_IO is zero when release the button, it is 2V when pushed button, but voltage can't hold state when release.
3, VDD_EMMC_1V8 is zero when release botton(can't measure when push botton).
4, VDDF_2V85 is zero when release botton(can't measure when push botton).

Do you have any further suggestion to fixed it? Thank you.
Attachments
xu4.JPG
xu4.JPG (63.81 KiB) Viewed 582 times

User avatar
odroid
Site Admin
Posts: 35334
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 1096 times
Been thanked: 831 times
Contact:

Re: one xu4 can't boot, another works well

Post by odroid »

Thank you for the detail measurements.
But I think the PMIC or CPU seems to be damaged unknown electrical shock.

Please contact "odroid at hardkernel dot com" with a link of this post.
They will help your RMA process if you purchased the board from our web-store directly.
Otherwise, contact your local distributor/reseller.
Sorry for the inconvenience caused.

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 0 guests