H2 Stops at Logo After NVMe was installed

[schm1th0]

Deal all,

The H2 (Current Bios GLK-SF 1.07) stops at the Hardkernel Logo after a NVMe was installed.
When I remove it again, the H2 boots into the Setup of Thrones BIOS and I can boot from the USB device.

What shall I do?


NVMe Specs:

samsung MZVLW256HEHP-000L7 (PCIe 3.0, x4, NVMe)

Thanks in advance for help!

[powerful owl]

I can't help much with diagnosing, but FWIW can report that it's unlikely to be an incompatible SSD as I use the 128GB version of the same with no issues (MZ-VLW1280).

[fvolk]

stops at the Hardkernel Logo after a NVMe was installed.

You do not say...
Is the disk completely empty?
Or does it already contain a partition table? Is it GPT?
Or does it already contain an OS installation?
...

[schm1th0]

You do not say...
Is the disk completely empty?
Or does it already contain a partition table? Is it GPT?
Or does it already contain an OS installation?
...

Its empty! I am also not able to choose the boot menu during startup for choosing a usb device from where i want to install the operating system .

[schm1th0]

Remove the BIOS/RTC backup battery as well as DC plug and wait a few minutes to reset the BIOS settings just in case.

If it doesn't help, try to change the PCIe Clock gating option.
SETUP → Chipset → South Cluster Configuration → PCI Express Configuration → PCI Express Clock Gating

[schm1th0]

Thanks for answer! In the meantime I solved the problem. I got the same NVMe device again and now it works. Its a strange thing, because both devices are working in an other device.