XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Post Reply
harddrop
Posts: 4
Joined: Mon Aug 12, 2019 12:11 pm
languages_spoken: english, korean
ODROIDs: XU4+CS2
H2
Has thanked: 0
Been thanked: 0
Contact:

XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by harddrop » Mon Aug 12, 2019 2:09 pm

사용 환경:
ODROID XU4 + cloudshell2(CS2)
WD White 8TB HDD (WD easystore에서 적출, 정상작동 확인, 포멧: EXT4)
RAID: PM
OMV4 (https://wiki.odroid.com/accessory/add-o ... _vault_omv이 문서의 절차를 따라 eMMC에 설치)

첫 부팅시엔 모든게 괜찮은데 재부팅시 하드디스크가 인식되지 않는 상태로 부팅됩니다.
웹 패널에서 재시작 클릭과 ssh에서 reboot실행 모두 문제가 발생합니다.
종종 재시작/종료도 제대로 안되는지 연결만 끊기고 CS2만 계속 켜져있기도 합니다. (=접속 시도시 종종 ERR_ADDRESS_UNREACHABLE대신 err_connection_refused가 반환됨.)
물리적으로 코드를 뽑았다 재연결해야 다시 하드가 인식되어 보이며 정상작동합니다.

해결을 위해 다음 사항을 시도해 보았습니다:
1. OMV 재설치 (위키 페이지를 따라서 설치)
2. CS2 펌웨어 업그레이드/다운그레이드 (위키 페이지를 따라서 Windows환경에서 작업)
3. boot.ini 수정으로 UAS 비활성화. (https://awesometic.tistory.com/50에 나온대로 작업)
4. https://wiki.odroid.com/accessory/add-o ... run_script의 스크립트 실행. 그러나 오류 발생.
디스크 미인식시 ./chOpSmartinfo.sh실행결과 (chOpSmartinfo.sh의 이름을 q.sh로 바꾸었습니다.)

Code: Select all

root@odroidxu4:~# ./q.sh
Okay. You did it already. You don't need to try it
Okay. You did it already. You don't need to try it
grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
ERROR : This is a script to fix HDD disconnected from the system,
        when you access S.M.A.R.T information.
        Read me using any text editor and fix it
You have to see "Okay" three times
If you got an ERROR even one time, please modify the files by hand
1. /usr/share/php/openmediavault/system/storage/smartinformation.inc
2. /usr/share/openmediavault/engined/rpc/smart.inc
3. /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc

현재 시스템 상태는 다음과 같습니다.
1. OMV버전:4.1.23-1 (Arrakis)
2. 커널: Linux 4.14.133-odroidxu4
3. UAS 비활성화됨
4. CS2펌웨어 버전: v158.001.000.004

추가 정보:
1. CS2펌웨어 버전이 v158.001.000.003일 경우 HDD가 인식되지 않는 상황에서 OMV웹 관리자 페이지 -> 저장소 -> 파일 시스템에 접근할 수 없습니다. 로딩 중만 계속 표시됩니다. 같은 카테고리에 있는 디스크도 마찬가지입니다.
2. CS2펌웨어 버전이 v158.001.000.004일 경우 HDD가 인식되지 않는 상황에서 OMV웹 관리자 페이지 -> 저장소 -> 파일 시스템에 접근할 수 있습니다. 이 때 인식되지 않는 그 HDD에 할당된 파일 시스템은 상태가 '누락됨' 이라고 표시됩니다. 같은 카테고리에 있는 디스크에서는 해당 HDD가 아예 표시되지 않고 OMV가 설치된 eMMC 메모리만 나옵니다. 하지만 가끔 v158.001.000.003처럼 무한로딩 되기도 합니다. 펌웨어쪽 문제가 아닌건지... 잘 모르겠습니다.
3. 타 버전의 CS2 펌웨어는 아직 올려보지 않았습니다.
4. 하드디스크 정상인식시 CS2내장 LCD에 같은 하드디스크가 연속으로 2번 표시됩니다.
5. 하드디스크 미인식시 OMV syslog에 다음 오류가 계속 표시됩니다.

Code: Select all

monit[1416]: 'mountpoint_srv_dev-disk-by-label-HDD0' status failed (1) -- /srv/dev-disk-by-label-HDD0 is not a mountpoint

관련 코드 (HDD레이블은 HDD0입니다.):

1. HDD 인식시 lsusb

Code: Select all

root@odroidxu4:~# lsusb
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
2. HDD 인식시 lsusb -t

Code: Select all

root@odroidxu4:~# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
3. HDD 인식시 dmesg

Code: Select all

root@odroidxu4:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.14.133-odroidxu4 (root@ubuntu4armbian) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #2 SMP PREEMPT Tue Jul 16 19:33:01 CEST 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=50c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000] free_area_init_node: node 0, pgdat c0b504c0, node_mem_map eee25000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:31
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 16 pages/cpu s36236 r8192 d21108 u65536
[    0.000000] pcpu-alloc: s36236 r8192 d21108 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 consoleblank=0 loglevel=1 panic=10 root=UUID=d0da7bbe-e3af-4588-8715-aa5c4478eb88 rootfstype=btrfs rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  usb-storage.quirks=0x152d:0x0561:u s5p_mfc.mem=16M
[    0.000000] hdmi: using HDMI mode
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1906556K/2074624K available (6144K kernel code, 325K rwdata, 2316K rodata, 1024K init, 344K bss, 36996K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0xc0008000 - 0xc0700000   (7136 kB)
                     .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
                     .data : 0xc0b00000 - 0xc0b51520   ( 326 kB)
                      .bss : 0xc0b5b028 - 0xc0bb10e8   ( 345 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] hperf_hmp: fast CPUs mask: 000000F0
[    0.000000] hperf_hmp: slow CPUs mask: 0000000F
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000026] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001567] Console: colour dummy device 80x30
[    0.001585] console [tty1] enabled
[    0.001614] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001628] pid_max: default: 32768 minimum: 301
[    0.001766] Security Framework initialized
[    0.001778] AppArmor: AppArmor disabled by boot time parameter
[    0.001833] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001852] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002591] CPU: Testing write buffer coherency: ok
[    0.003377] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.016054] Setting up static identity map for 0x40100000 - 0x40100054
[    0.016659] ARM CCI driver probed
[    0.016880] Exynos MCPM support installed
[    0.023994] Hierarchical SRCU implementation.
[    0.039992] smp: Bringing up secondary CPUs ...
[    0.068322] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.092297] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.120293] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.148298] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.148306] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.168292] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.168300] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.176584] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.176590] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.184583] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.184590] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.184793] smp: Brought up 1 node, 8 CPUs
[    0.184805] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.184810] CPU: All CPU(s) started in HYP mode.
[    0.184815] CPU: Virtualization extensions available.
[    0.186547] devtmpfs: initialized
[    0.203540] random: get_random_u32 called from bucket_table_alloc+0xa7/0x174 with crng_init=0
[    0.204119] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.204245] hperf_hmp: registered cpufreq transition notifier
[    0.204433] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.204448] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.207132] xor: measuring software checksum speed
[    0.243975]    arm4regs  :  1533.000 MB/sec
[    0.283970]    8regs     :  1245.000 MB/sec
[    0.323973]    32regs    :  1309.000 MB/sec
[    0.363971]    neon      :  2238.000 MB/sec
[    0.363980] xor: using function: neon (2238.000 MB/sec)
[    0.363999] pinctrl core: initialized pinctrl subsystem
[    0.366068] NET: Registered protocol family 16
[    0.370369] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.376308] random: fast init done
[    0.376359] cpuidle: using governor menu
[    0.385117] exynos-audss-clk 3810000.audss-clock-controller: epll 180633609
[    0.406399] EXYNOS5420 PMU initialized
[    0.516178] raid6: int32x1  gen()   180 MB/s
[    0.584083] raid6: int32x1  xor()   177 MB/s
[    0.652181] raid6: int32x2  gen()   264 MB/s
[    0.720104] raid6: int32x2  xor()   232 MB/s
[    0.788070] raid6: int32x4  gen()   313 MB/s
[    0.856026] raid6: int32x4  xor()   258 MB/s
[    0.924005] raid6: int32x8  gen()   352 MB/s
[    0.992049] raid6: int32x8  xor()   249 MB/s
[    1.060010] raid6: neonx1   gen()   778 MB/s
[    1.128009] raid6: neonx1   xor()  1029 MB/s
[    1.196027] raid6: neonx2   gen()  1048 MB/s
[    1.264004] raid6: neonx2   xor()  1303 MB/s
[    1.331997] raid6: neonx4   gen()  1447 MB/s
[    1.400000] raid6: neonx4   xor()  1324 MB/s
[    1.468011] raid6: neonx8   gen()  1294 MB/s
[    1.536013] raid6: neonx8   xor()  1185 MB/s
[    1.536021] raid6: using algorithm neonx4 gen() 1447 MB/s
[    1.536028] raid6: .... xor() 1324 MB/s, rmw enabled
[    1.536036] raid6: using neon recovery algorithm
[    1.537879] SCSI subsystem initialized
[    1.538064] usbcore: registered new interface driver usbfs
[    1.538110] usbcore: registered new interface driver hub
[    1.538271] usbcore: registered new device driver usb
[    1.538716] i2c-gpio soc:i2c-hdmi: using pins 177 (SDA) and 178 (SCL)
[    1.539257] s3c-i2c 12c70000.i2c: slave address 0x00
[    1.539270] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz
[    1.539493] s3c-i2c 12c70000.i2c: i2c-1: S3C I2C adapter
[    1.539999] media: Linux media interface: v0.10
[    1.540035] Linux video capture interface: v2.00
[    1.540312] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    1.541148] Advanced Linux Sound Architecture Driver Initialized.
[    1.542492] clocksource: Switched to clocksource mct-frc
[    1.542659] VFS: Disk quotas dquot_6.6.0
[    1.542717] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.554629] NET: Registered protocol family 2
[    1.555170] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.555246] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.555400] TCP: Hash tables configured (established 8192 bind 8192)
[    1.555501] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.555539] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.555828] NET: Registered protocol family 1
[    1.556422] RPC: Registered named UNIX socket transport module.
[    1.556430] RPC: Registered udp transport module.
[    1.556437] RPC: Registered tcp transport module.
[    1.556445] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.556627] Trying to unpack rootfs image as initramfs...
[    1.918320] Freeing initrd memory: 6160K
[    1.919924] audit: initializing netlink subsys (disabled)
[    1.920105] audit: type=2000 audit(1.916:1): state=initialized audit_enabled=0 res=1
[    1.920311] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.928297] NFS: Registering the id_resolver key type
[    1.928326] Key type id_resolver registered
[    1.928334] Key type id_legacy registered
[    1.928354] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.928367] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.929042] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.929726] aufs 4.14.73+-20181119
[    1.935637] bounce: pool size: 64 pages
[    1.935685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.935887] io scheduler noop registered
[    1.935895] io scheduler deadline registered
[    1.936040] io scheduler cfq registered (default)
[    1.936049] io scheduler mq-deadline registered
[    1.936057] io scheduler kyber registered
[    1.938429] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.939405] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.939471] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.939799] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.939872] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.944869] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    1.944881] dma-pl330 3880000.adma:  DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    1.947389] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.947400] dma-pl330 121a0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.949615] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.949626] dma-pl330 121b0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.950370] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.950381] dma-pl330 10800000.mdma:         DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    2.008337] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.010599] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    2.010982] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    2.011338] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    2.011422] console [ttySAC2] enabled
[    2.011775] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    2.013872] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu
[    2.013926] iommu: Adding device 14450000.mixer to group 0
[    2.015600] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[    2.016299] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    2.016417] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    2.016475] iommu: Adding device 10850000.g2d to group 1
[    2.016855] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully probed.
[    2.017980] exynos-rot 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.018030] iommu: Adding device 11c00000.rotator to group 2
[    2.018394] exynos-rot 11c00000.rotator: The exynos rotator is probed successfully
[    2.019180] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.023398] mali 11800000.mali: Continuing without Mali regulator control
[    2.024157] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    2.024672] mali 11800000.mali: Protected mode not available
[    2.025083] devfreq devfreq0: Couldn't update frequency transition information.
[    2.025720] mali 11800000.mali: Probed as mali0
[    2.034599] brd: module loaded
[    2.043989] loop: module loaded
[    2.044732] libphy: Fixed MDIO Bus: probed
[    2.045088] usbcore: registered new interface driver r8152
[    2.045138] usbcore: registered new interface driver cdc_ether
[    2.045175] usbcore: registered new interface driver cdc_subset
[    2.047507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.047516] ehci-exynos: EHCI EXYNOS driver
[    2.047864] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.048045] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.048324] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000
[    2.062540] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.062759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.062770] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.062780] usb usb1: Product: EHCI Host Controller
[    2.062789] usb usb1: Manufacturer: Linux 4.14.133-odroidxu4 ehci_hcd
[    2.062798] usb usb1: SerialNumber: 12110000.usb
[    2.063344] hub 1-0:1.0: USB hub found
[    2.063384] hub 1-0:1.0: 3 ports detected
[    2.064247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.064265] ohci-exynos: OHCI EXYNOS driver
[    2.064475] exynos-ohci 12120000.usb: USB Host Controller
[    2.064675] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.064783] exynos-ohci 12120000.usb: irq 80, io mem 0x12120000
[    2.126750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.126761] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.126771] usb usb2: Product: USB Host Controller
[    2.126781] usb usb2: Manufacturer: Linux 4.14.133-odroidxu4 ohci_hcd
[    2.126790] usb usb2: SerialNumber: 12120000.usb
[    2.127289] hub 2-0:1.0: USB hub found
[    2.127330] hub 2-0:1.0: 3 ports detected
[    2.128867] usbcore: registered new interface driver usb-storage
[    2.129570] mousedev: PS/2 mouse device common for all mice
[    2.131452] i2c /dev entries driver
[    2.146780] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.164296] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    2.182464] vdd_ldo30: Bringing 1800000uV into 3300000-3300000uV
[    2.209984] vdd_1.8v_ldo: Bringing 1850000uV into 1500000-1500000uV
[    3.241017] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    3.243887] IR NEC protocol handler initialized
[    3.243895] IR RC5(x/sz) protocol handler initialized
[    3.243903] IR RC6 protocol handler initialized
[    3.243910] IR JVC protocol handler initialized
[    3.243917] IR Sony protocol handler initialized
[    3.243923] IR SANYO protocol handler initialized
[    3.243930] IR Sharp protocol handler initialized
[    3.243937] IR MCE Keyboard/mouse protocol handler initialized
[    3.243945] IR XMP protocol handler initialized
[    3.244687] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    3.244738] iommu: Adding device 11f50000.jpeg to group 3
[    3.245099] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video30
[    3.245254] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video31
[    3.245262] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    3.245487] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    3.245542] iommu: Adding device 11f60000.jpeg to group 4
[    3.245878] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video32
[    3.246032] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video33
[    3.246040] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    3.247183] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    3.247321] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    3.247381] iommu: Adding device 11000000.codec to group 5
[    3.265338] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    3.265447] (NULL device *): Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.265459] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.265638] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[    3.265785] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[    3.267208] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.267260] iommu: Adding device 13e00000.video-scaler to group 6
[    3.268438] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.268490] iommu: Adding device 13e10000.video-scaler to group 7
[    3.288263] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.289158] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.290073] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.291009] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.291939] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.292600] device-mapper: uevent: version 1.0.3
[    3.292925] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.302592] sdhci: Secure Digital Host Controller Interface driver
[    3.302599] sdhci: Copyright(c) Pierre Ossman
[    3.303060] Synopsys Designware Multimedia Card Interface Driver
[    3.304279] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    3.304429] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    3.304445] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    3.304502] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
[    3.304838] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[    3.327295] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.349015] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.350274] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.350319] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.352631] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
[    3.383032] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.412826] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.414283] hidraw: raw HID events driver (C) Jiri Kosina
[    3.415603] usbcore: registered new interface driver usbhid
[    3.415626] usbhid: USB HID core driver
[    3.426114] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.426252] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.426393] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.426567] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.431910] NET: Registered protocol family 17
[    3.431935] NET: Registered protocol family 15
[    3.431982] Key type dns_resolver registered
[    3.432561] Registering SWP/SWPB emulation handler
[    3.432962] registered taskstats version 1
[    3.433679] Btrfs loaded, crc32c=crc32c-generic
[    3.439756] Key type encrypted registered
[    3.464330] OF: graph: no port node found in /soc/hdmi@14530000
[    3.465263] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[    3.465396] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0771ff4)
[    3.465415] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0772694)
[    3.465420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.465424] [drm] No driver support for vblank timestamp query.
[    3.465552] [drm] Cannot find any crtc or sizes
[    3.465915] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0
[    3.466259] [drm] Cannot find any crtc or sizes
[    3.467872] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.467993] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[    3.468221] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.468252] xhci-hcd xhci-hcd.3.auto: irq 150, io mem 0x12000000
[    3.468416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.468421] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.468427] usb usb3: Product: xHCI Host Controller
[    3.468432] usb usb3: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.468437] usb usb3: SerialNumber: xhci-hcd.3.auto
[    3.468735] hub 3-0:1.0: USB hub found
[    3.468756] hub 3-0:1.0: 1 port detected
[    3.468951] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.469043] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    3.469051] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0  SuperSpeed
[    3.469112] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.469205] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.469211] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.469216] usb usb4: Product: xHCI Host Controller
[    3.469221] usb usb4: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.469226] usb usb4: SerialNumber: xhci-hcd.3.auto
[    3.469541] hub 4-0:1.0: USB hub found
[    3.469565] hub 4-0:1.0: 1 port detected
[    3.471806] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    3.471939] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[    3.472180] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.472214] xhci-hcd xhci-hcd.6.auto: irq 151, io mem 0x12400000
[    3.472352] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.472359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.472365] usb usb5: Product: xHCI Host Controller
[    3.472370] usb usb5: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.472376] usb usb5: SerialNumber: xhci-hcd.6.auto
[    3.472675] hub 5-0:1.0: USB hub found
[    3.472700] hub 5-0:1.0: 1 port detected
[    3.472903] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    3.473005] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[    3.473015] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0  SuperSpeed
[    3.473077] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.473180] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.473187] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.473197] usb usb6: Product: xHCI Host Controller
[    3.473202] usb usb6: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.473208] usb usb6: SerialNumber: xhci-hcd.6.auto
[    3.473516] hub 6-0:1.0: USB hub found
[    3.473549] hub 6-0:1.0: 1 port detected
[    3.474561] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.474609] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it
[    3.474662] rtc rtc1: invalid alarm value: 1900-1-1 0:0:0
[    3.474779] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[    3.476799] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    3.477295] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    3.477649] exynos-bus: new bus device registered: soc:bus_fsys_apb (200000 KHz ~ 200000 KHz)
[    3.477949] exynos-bus: new bus device registered: soc:bus_fsys (200000 KHz ~ 200000 KHz)
[    3.478376] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    3.478940] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    3.479416] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    3.479761] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    3.480182] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.480299] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    3.480832] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    3.480930] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[    3.481140] mmc_host mmc0: Bus speed (slot 0) = 266666666Hz (slot req 200000000Hz, actual 133333333HZ div = 1)
[    3.481358] mmc0: new HS400 MMC card at address 0001
[    3.481369] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    3.481753] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[    3.481920] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    3.481998] mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB
[    3.482243] mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB
[    3.482369] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    3.482521] mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB
[    3.482924] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    3.483153]  mmcblk0: p1 p2 p3
[    3.483419] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    3.484019] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    3.484471] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    3.484500] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    3.485256] odroid-audio sound: multicodec <-> 3830000.i2s mapping ok
[    3.487137] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    3.489950] s5m-rtc s2mps14-rtc: setting system clock to 2019-08-12 05:04:42 UTC (1565586282)
[    3.492494] ALSA device list:
[    3.492499]   #0: Odroid-XU4
[    3.493854] Freeing unused kernel memory: 1024K
[    3.533248] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.533646] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.533704] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.806536] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.959290] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[    3.959298] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.959303] usb 3-1: Product: USB2.0 Hub
[    3.959310] usb 3-1: Manufacturer: GenesysLogic
[    3.981653] hub 3-1:1.0: USB hub found
[    3.982123] hub 3-1:1.0: 2 ports detected
[    4.082703] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.105581] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616
[    4.105588] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.105595] usb 4-1: Product: USB3.0 Hub
[    4.105601] usb 4-1: Manufacturer: GenesysLogic
[    4.109681] hub 4-1:1.0: USB hub found
[    4.109993] hub 4-1:1.0: 2 ports detected
[    4.566776] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.588636] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
[    4.588676] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.588708] usb 6-1: Product: USB 10/100/1000 LAN
[    4.588739] usb 6-1: Manufacturer: Realtek
[    4.588768] usb 6-1: SerialNumber: 000001000000
[    4.753467] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    4.827787] r8152 6-1:1.0 eth0: v1.09.9
[    4.845608] r8152 6-1:1.0 enx001e0636d99f: renamed from eth0
[    4.909308] async_tx: api initialized (async)
[    5.037550] BTRFS: device fsid d0da7bbe-e3af-4588-8715-aa5c4478eb88 devid 1 transid 2413 /dev/mmcblk0p2
[    5.108075] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    5.108084] BTRFS info (device mmcblk0p2): has skinny extents
[    5.119816] BTRFS info (device mmcblk0p2): enabling ssd optimizations
[    5.400406] NET: Registered protocol family 10
[    5.405242] Segment Routing with IPv6
[    5.407903] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.422463] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.423106] systemd[1]: Detected architecture arm.
[    5.438878] systemd[1]: Set hostname to <odroidxu4>.
[    5.817587] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.834831] systemd[1]: Listening on udev Kernel Socket.
[    5.852358] systemd[1]: Created slice User and Session Slice.
[    5.866831] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.883366] systemd[1]: Listening on Journal Audit Socket.
[    5.899587] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.914827] systemd[1]: Listening on udev Control Socket.
[    6.391102] usbcore: registered new interface driver ax88179_178a
[    6.400400] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
[    6.403032] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned.
[    6.403824] spidev spi1.0: spidev spi1.0 1000kHz 8 bits mode=0x00
[    6.403832] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    6.404020] spidev spi1.0: Deleting spi1.0
[    6.404713] fbtft_device: GPIOS used by 'hktft9340':
[    6.404723] fbtft_device: 'reset' = GPIO21
[    6.404730] fbtft_device: 'dc' = GPIO22
[    6.404737] fbtft_device: 'led' = GPIO18
[    6.404750] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    6.404762] spi spi1.0: fb_ili9340 spi1.0 35000kHz 8 bits mode=0x00
[    6.428238] random: crng init done
[    6.428277] random: 7 urandom warning(s) missed due to ratelimiting
[    6.454974] BTRFS warning (device mmcblk0p2): excessive commit interval 600
[    6.454983] BTRFS info (device mmcblk0p2): use lzo compression
[    6.454989] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    7.100415] systemd-journald[294]: Received request to flush runtime journal from PID 1
[    7.116702] fb_ili9340: module is from the staging directory, the quality is unknown, you have been warned.
[    7.323417] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[    7.323643] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[    7.323651] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[    7.336165] Driver for 1-wire Dallas network protocol.
[    7.590719] Console: switching to colour frame buffer device 40x15
[    7.591277] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB buffer memory, fps=20, spi1.0 at 35 MHz
[    8.325772] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,errors=remount-ro
[   18.086827] usb 4-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[   18.108605] usb 4-1.2: New USB device found, idVendor=152d, idProduct=0561
[   18.108646] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[   18.108678] usb 4-1.2: Product: ODROID
[   18.108710] usb 4-1.2: SerialNumber: DB01234567E5
[   18.112821] usb 4-1.2: UAS is blacklisted for this device, using usb-storage instead
[   18.112916] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[   18.115308] usb-storage 4-1.2:1.0: Quirks match for vid 152d pid 0561: 800000
[   18.115627] scsi host0: usb-storage 4-1.2:1.0
[   18.127477] usbcore: registered new interface driver uas
[   19.141311] scsi 0:0:0:0: Direct-Access     ODROID                    0004 PQ: 0 ANSI: 6
[   19.144920] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[   19.145833] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   19.145913] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[   19.147177] sd 0:0:0:0: [sda] Write Protect is off
[   19.147228] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[   19.148566] sd 0:0:0:0: [sda] No Caching mode page found
[   19.148664] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   19.208783]  sda: sda1
[   19.212120] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.182176] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[   22.078277] zram: Added device: zram0
[   22.079105] zram: Added device: zram1
[   22.079673] zram: Added device: zram2
[   22.080332] zram: Added device: zram3
[   22.081049] zram: Added device: zram4
[   22.081753] zram: Added device: zram5
[   22.082300] zram: Added device: zram6
[   22.083975] zram: Added device: zram7
[   22.133320] zram0: detected capacity change from 0 to 130867200
[   22.171956] Adding 127796k swap on /dev/zram0.  Priority:5 extents:1 across:127796k SS
[   22.173857] zram1: detected capacity change from 0 to 130867200
[   22.197717] Adding 127796k swap on /dev/zram1.  Priority:5 extents:1 across:127796k SS
[   22.205339] zram2: detected capacity change from 0 to 130867200
[   22.234201] Adding 127796k swap on /dev/zram2.  Priority:5 extents:1 across:127796k SS
[   22.235976] zram3: detected capacity change from 0 to 130867200
[   22.259092] Adding 127796k swap on /dev/zram3.  Priority:5 extents:1 across:127796k SS
[   22.260393] zram4: detected capacity change from 0 to 130867200
[   22.278297] Adding 127796k swap on /dev/zram4.  Priority:5 extents:1 across:127796k SS
[   22.279717] zram5: detected capacity change from 0 to 130867200
[   22.304196] Adding 127796k swap on /dev/zram5.  Priority:5 extents:1 across:127796k SS
[   22.305694] zram6: detected capacity change from 0 to 130867200
[   22.329998] Adding 127796k swap on /dev/zram6.  Priority:5 extents:1 across:127796k SS
[   22.331925] zram7: detected capacity change from 0 to 130867200
[   22.356427] Adding 127796k swap on /dev/zram7.  Priority:5 extents:1 across:127796k SS
[   22.668267] nr_pdflush_threads exported in /proc is scheduled for removal
[   22.684005] NFSD: starting 90-second grace period (net c0b4a280)
[   22.974599] IPv6: ADDRCONF(NETDEV_UP): enx001e0636d99f: link is not ready
[   22.979908] IPv6: ADDRCONF(NETDEV_UP): enx001e0636d99f: link is not ready
[   23.013074] r8152 6-1:1.0 enx001e0636d99f: carrier on
[   23.013141] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e0636d99f: link becomes ready
[   28.529106] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
4. HDD 미인식시 lsusb

Code: Select all

root@odroidxu4:~# lsusb
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
5. HDD 미인식시 lsusb -t

Code: Select all

root@odroidxu4:~# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
6.HDD 미인식시 dmesg

Code: Select all

root@odroidxu4:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.14.133-odroidxu4 (root@ubuntu4armbian) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #2 SMP PREEMPT Tue Jul 16 19:33:01 CEST 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=50c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000] free_area_init_node: node 0, pgdat c0b504c0, node_mem_map eee25000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:31
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 16 pages/cpu s36236 r8192 d21108 u65536
[    0.000000] pcpu-alloc: s36236 r8192 d21108 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 consoleblank=0 loglevel=1 panic=10 root=UUID=d0da7bbe-e3af-4588-8715-aa5c4478eb88 rootfstype=btrfs rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  usb-storage.quirks=0x152d:0x0561:u s5p_mfc.mem=16M
[    0.000000] hdmi: using HDMI mode
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1906556K/2074624K available (6144K kernel code, 325K rwdata, 2316K rodata, 1024K init, 344K bss, 36996K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0xc0008000 - 0xc0700000   (7136 kB)
                     .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
                     .data : 0xc0b00000 - 0xc0b51520   ( 326 kB)
                      .bss : 0xc0b5b028 - 0xc0bb10e8   ( 345 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] hperf_hmp: fast CPUs mask: 000000F0
[    0.000000] hperf_hmp: slow CPUs mask: 0000000F
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000026] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001560] Console: colour dummy device 80x30
[    0.001577] console [tty1] enabled
[    0.001607] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001621] pid_max: default: 32768 minimum: 301
[    0.001757] Security Framework initialized
[    0.001769] AppArmor: AppArmor disabled by boot time parameter
[    0.001823] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001842] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002581] CPU: Testing write buffer coherency: ok
[    0.003372] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.016050] Setting up static identity map for 0x40100000 - 0x40100054
[    0.016653] ARM CCI driver probed
[    0.016876] Exynos MCPM support installed
[    0.023994] Hierarchical SRCU implementation.
[    0.039991] smp: Bringing up secondary CPUs ...
[    0.068320] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.092294] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.120290] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.148314] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.148322] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.168292] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.168299] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.176566] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.176573] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.184575] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.184582] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.184783] smp: Brought up 1 node, 8 CPUs
[    0.184796] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.184801] CPU: All CPU(s) started in HYP mode.
[    0.184805] CPU: Virtualization extensions available.
[    0.186527] devtmpfs: initialized
[    0.203516] random: get_random_u32 called from bucket_table_alloc+0xa7/0x174 with crng_init=0
[    0.204092] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.204218] hperf_hmp: registered cpufreq transition notifier
[    0.204401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.204417] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.207096] xor: measuring software checksum speed
[    0.243972]    arm4regs  :  1535.000 MB/sec
[    0.283971]    8regs     :  1248.000 MB/sec
[    0.323971]    32regs    :  1312.000 MB/sec
[    0.363970]    neon      :  2243.000 MB/sec
[    0.363978] xor: using function: neon (2243.000 MB/sec)
[    0.363997] pinctrl core: initialized pinctrl subsystem
[    0.366037] NET: Registered protocol family 16
[    0.370359] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.376305] random: fast init done
[    0.376375] cpuidle: using governor menu
[    0.385113] exynos-audss-clk 3810000.audss-clock-controller: epll 180633609
[    0.406373] EXYNOS5420 PMU initialized
[    0.516184] raid6: int32x1  gen()   180 MB/s
[    0.584065] raid6: int32x1  xor()   177 MB/s
[    0.652184] raid6: int32x2  gen()   264 MB/s
[    0.720084] raid6: int32x2  xor()   232 MB/s
[    0.788036] raid6: int32x4  gen()   337 MB/s
[    0.856007] raid6: int32x4  xor()   258 MB/s
[    0.924129] raid6: int32x8  gen()   353 MB/s
[    0.992029] raid6: int32x8  xor()   249 MB/s
[    1.060047] raid6: neonx1   gen()   779 MB/s
[    1.128011] raid6: neonx1   xor()  1030 MB/s
[    1.195990] raid6: neonx2   gen()  1048 MB/s
[    1.263993] raid6: neonx2   xor()  1303 MB/s
[    1.332013] raid6: neonx4   gen()  1448 MB/s
[    1.400013] raid6: neonx4   xor()  1323 MB/s
[    1.468038] raid6: neonx8   gen()  1296 MB/s
[    1.535994] raid6: neonx8   xor()  1185 MB/s
[    1.536001] raid6: using algorithm neonx4 gen() 1448 MB/s
[    1.536009] raid6: .... xor() 1323 MB/s, rmw enabled
[    1.536016] raid6: using neon recovery algorithm
[    1.537863] SCSI subsystem initialized
[    1.538047] usbcore: registered new interface driver usbfs
[    1.538094] usbcore: registered new interface driver hub
[    1.538252] usbcore: registered new device driver usb
[    1.538698] i2c-gpio soc:i2c-hdmi: using pins 177 (SDA) and 178 (SCL)
[    1.539241] s3c-i2c 12c70000.i2c: slave address 0x00
[    1.539255] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz
[    1.539479] s3c-i2c 12c70000.i2c: i2c-1: S3C I2C adapter
[    1.539986] media: Linux media interface: v0.10
[    1.540022] Linux video capture interface: v2.00
[    1.540300] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    1.541136] Advanced Linux Sound Architecture Driver Initialized.
[    1.542473] clocksource: Switched to clocksource mct-frc
[    1.542640] VFS: Disk quotas dquot_6.6.0
[    1.542699] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.554601] NET: Registered protocol family 2
[    1.555141] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.555217] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.555372] TCP: Hash tables configured (established 8192 bind 8192)
[    1.555471] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.555508] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.555796] NET: Registered protocol family 1
[    1.556397] RPC: Registered named UNIX socket transport module.
[    1.556405] RPC: Registered udp transport module.
[    1.556412] RPC: Registered tcp transport module.
[    1.556419] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.556602] Trying to unpack rootfs image as initramfs...
[    1.918267] Freeing initrd memory: 6160K
[    1.919896] audit: initializing netlink subsys (disabled)
[    1.920091] audit: type=2000 audit(1.916:1): state=initialized audit_enabled=0 res=1
[    1.920263] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.928230] NFS: Registering the id_resolver key type
[    1.928253] Key type id_resolver registered
[    1.928260] Key type id_legacy registered
[    1.928280] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.928294] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.928967] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.929655] aufs 4.14.73+-20181119
[    1.935507] bounce: pool size: 64 pages
[    1.935560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.935756] io scheduler noop registered
[    1.935764] io scheduler deadline registered
[    1.935909] io scheduler cfq registered (default)
[    1.935917] io scheduler mq-deadline registered
[    1.935925] io scheduler kyber registered
[    1.938300] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.939276] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.939340] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.939665] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.939738] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.944740] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    1.944752] dma-pl330 3880000.adma:  DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    1.947256] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.947267] dma-pl330 121a0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.949490] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.949501] dma-pl330 121b0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.950238] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.950249] dma-pl330 10800000.mdma:         DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    2.008831] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.011095] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    2.011459] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    2.011820] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    2.011913] console [ttySAC2] enabled
[    2.012260] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    2.014361] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu
[    2.014415] iommu: Adding device 14450000.mixer to group 0
[    2.016086] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[    2.016782] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    2.016902] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    2.016961] iommu: Adding device 10850000.g2d to group 1
[    2.017341] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully probed.
[    2.018450] exynos-rot 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.018542] iommu: Adding device 11c00000.rotator to group 2
[    2.018897] exynos-rot 11c00000.rotator: The exynos rotator is probed successfully
[    2.019647] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.023859] mali 11800000.mali: Continuing without Mali regulator control
[    2.024622] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    2.025131] mali 11800000.mali: Protected mode not available
[    2.025542] devfreq devfreq0: Couldn't update frequency transition information.
[    2.026171] mali 11800000.mali: Probed as mali0
[    2.035069] brd: module loaded
[    2.044404] loop: module loaded
[    2.045145] libphy: Fixed MDIO Bus: probed
[    2.045502] usbcore: registered new interface driver r8152
[    2.045552] usbcore: registered new interface driver cdc_ether
[    2.045588] usbcore: registered new interface driver cdc_subset
[    2.047903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.047911] ehci-exynos: EHCI EXYNOS driver
[    2.048268] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.048449] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.048719] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000
[    2.062523] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.062746] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.062757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.062767] usb usb1: Product: EHCI Host Controller
[    2.062776] usb usb1: Manufacturer: Linux 4.14.133-odroidxu4 ehci_hcd
[    2.062786] usb usb1: SerialNumber: 12110000.usb
[    2.063323] hub 1-0:1.0: USB hub found
[    2.063364] hub 1-0:1.0: 3 ports detected
[    2.064235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.064253] ohci-exynos: OHCI EXYNOS driver
[    2.064461] exynos-ohci 12120000.usb: USB Host Controller
[    2.064651] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.064760] exynos-ohci 12120000.usb: irq 80, io mem 0x12120000
[    2.126734] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.126746] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.126755] usb usb2: Product: USB Host Controller
[    2.126765] usb usb2: Manufacturer: Linux 4.14.133-odroidxu4 ohci_hcd
[    2.126774] usb usb2: SerialNumber: 12120000.usb
[    2.127272] hub 2-0:1.0: USB hub found
[    2.127312] hub 2-0:1.0: 3 ports detected
[    2.128849] usbcore: registered new interface driver usb-storage
[    2.129563] mousedev: PS/2 mouse device common for all mice
[    2.131442] i2c /dev entries driver
[    2.146758] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.164270] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    2.182398] vdd_ldo30: Bringing 1800000uV into 3300000-3300000uV
[    2.209852] vdd_1.8v_ldo: Bringing 1850000uV into 1500000-1500000uV
[    3.240866] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    3.243737] IR NEC protocol handler initialized
[    3.243745] IR RC5(x/sz) protocol handler initialized
[    3.243753] IR RC6 protocol handler initialized
[    3.243759] IR JVC protocol handler initialized
[    3.243766] IR Sony protocol handler initialized
[    3.243773] IR SANYO protocol handler initialized
[    3.243780] IR Sharp protocol handler initialized
[    3.243787] IR MCE Keyboard/mouse protocol handler initialized
[    3.243795] IR XMP protocol handler initialized
[    3.244535] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    3.244587] iommu: Adding device 11f50000.jpeg to group 3
[    3.244940] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video30
[    3.245095] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video31
[    3.245103] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    3.245322] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    3.245371] iommu: Adding device 11f60000.jpeg to group 4
[    3.245712] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video32
[    3.245865] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video33
[    3.245872] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    3.247020] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    3.247158] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    3.247219] iommu: Adding device 11000000.codec to group 5
[    3.265144] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    3.265251] (NULL device *): Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.265263] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.265443] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[    3.265585] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[    3.267007] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.267059] iommu: Adding device 13e00000.video-scaler to group 6
[    3.268242] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.268294] iommu: Adding device 13e10000.video-scaler to group 7
[    3.288009] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.288894] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.289801] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.290735] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.291670] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.292338] device-mapper: uevent: version 1.0.3
[    3.292662] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.302196] sdhci: Secure Digital Host Controller Interface driver
[    3.302203] sdhci: Copyright(c) Pierre Ossman
[    3.302706] Synopsys Designware Multimedia Card Interface Driver
[    3.303918] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    3.304033] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    3.304049] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    3.304130] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
[    3.304444] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[    3.327275] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.349017] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.350278] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.350324] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.352618] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
[    3.383015] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.412779] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.414212] hidraw: raw HID events driver (C) Jiri Kosina
[    3.415505] usbcore: registered new interface driver usbhid
[    3.415527] usbhid: USB HID core driver
[    3.426204] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.426339] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.426519] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.426654] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.431986] NET: Registered protocol family 17
[    3.432011] NET: Registered protocol family 15
[    3.432059] Key type dns_resolver registered
[    3.432635] Registering SWP/SWPB emulation handler
[    3.433037] registered taskstats version 1
[    3.433761] Btrfs loaded, crc32c=crc32c-generic
[    3.439899] Key type encrypted registered
[    3.464443] OF: graph: no port node found in /soc/hdmi@14530000
[    3.465387] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[    3.465523] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0771ff4)
[    3.465541] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0772694)
[    3.465547] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.465551] [drm] No driver support for vblank timestamp query.
[    3.465678] [drm] Cannot find any crtc or sizes
[    3.466037] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0
[    3.466378] [drm] Cannot find any crtc or sizes
[    3.468023] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.468143] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[    3.468372] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.468403] xhci-hcd xhci-hcd.3.auto: irq 150, io mem 0x12000000
[    3.468568] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.468574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.468579] usb usb3: Product: xHCI Host Controller
[    3.468584] usb usb3: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.468589] usb usb3: SerialNumber: xhci-hcd.3.auto
[    3.468932] hub 3-0:1.0: USB hub found
[    3.468963] hub 3-0:1.0: 1 port detected
[    3.469184] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.469288] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    3.469298] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0  SuperSpeed
[    3.469362] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.469467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.469473] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.469479] usb usb4: Product: xHCI Host Controller
[    3.469485] usb usb4: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.469491] usb usb4: SerialNumber: xhci-hcd.3.auto
[    3.469802] hub 4-0:1.0: USB hub found
[    3.469831] hub 4-0:1.0: 1 port detected
[    3.472302] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    3.472436] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[    3.472677] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.472712] xhci-hcd xhci-hcd.6.auto: irq 151, io mem 0x12400000
[    3.472849] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.472856] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.472862] usb usb5: Product: xHCI Host Controller
[    3.472867] usb usb5: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.472873] usb usb5: SerialNumber: xhci-hcd.6.auto
[    3.473170] hub 5-0:1.0: USB hub found
[    3.473195] hub 5-0:1.0: 1 port detected
[    3.473399] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    3.473510] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[    3.473520] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0  SuperSpeed
[    3.473579] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.473682] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.473692] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.473698] usb usb6: Product: xHCI Host Controller
[    3.473704] usb usb6: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.473709] usb usb6: SerialNumber: xhci-hcd.6.auto
[    3.474018] hub 6-0:1.0: USB hub found
[    3.474051] hub 6-0:1.0: 1 port detected
[    3.475094] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.475142] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it
[    3.475196] rtc rtc1: invalid alarm value: 1900-1-1 0:0:0
[    3.475311] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[    3.477643] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    3.478125] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    3.478506] exynos-bus: new bus device registered: soc:bus_fsys_apb (200000 KHz ~ 200000 KHz)
[    3.478800] exynos-bus: new bus device registered: soc:bus_fsys (200000 KHz ~ 200000 KHz)
[    3.479229] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    3.479753] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    3.480227] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    3.480569] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    3.481085] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    3.481571] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    3.482043] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    3.482560] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    3.482963] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    3.483397] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    3.483843] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    3.484372] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    3.484793] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    3.484821] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    3.485509] odroid-audio sound: multicodec <-> 3830000.i2s mapping ok
[    3.487360] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    3.490112] s5m-rtc s2mps14-rtc: setting system clock to 2019-08-12 03:44:10 UTC (1565581450)
[    3.492663] ALSA device list:
[    3.492668]   #0: Odroid-XU4
[    3.494053] Freeing unused kernel memory: 1024K
[    3.501037] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.501904] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[    3.502245] mmc_host mmc0: Bus speed (slot 0) = 266666666Hz (slot req 200000000Hz, actual 133333333HZ div = 1)
[    3.502630] mmc0: new HS400 MMC card at address 0001
[    3.503194] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[    3.503546] mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB
[    3.503951] mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB
[    3.504266] mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB
[    3.505005]  mmcblk0: p1 p2 p3
[    3.535629] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.536091] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.536152] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.802506] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.955206] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[    3.955213] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.955219] usb 3-1: Product: USB2.0 Hub
[    3.955224] usb 3-1: Manufacturer: GenesysLogic
[    3.981786] hub 3-1:1.0: USB hub found
[    3.982249] hub 3-1:1.0: 2 ports detected
[    4.082720] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.105543] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616
[    4.105551] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.105558] usb 4-1: Product: USB3.0 Hub
[    4.105564] usb 4-1: Manufacturer: GenesysLogic
[    4.109924] hub 4-1:1.0: USB hub found
[    4.110235] hub 4-1:1.0: 2 ports detected
[    4.574854] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.596526] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
[    4.596566] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.596596] usb 6-1: Product: USB 10/100/1000 LAN
[    4.596627] usb 6-1: Manufacturer: Realtek
[    4.596656] usb 6-1: SerialNumber: 000001000000
[    4.785990] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    4.855791] r8152 6-1:1.0 eth0: v1.09.9
[    4.872001] r8152 6-1:1.0 enx001e0636d99f: renamed from eth0
[    4.944302] async_tx: api initialized (async)
[    5.072110] BTRFS: device fsid d0da7bbe-e3af-4588-8715-aa5c4478eb88 devid 1 transid 2394 /dev/mmcblk0p2
[    5.144350] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    5.144358] BTRFS info (device mmcblk0p2): has skinny extents
[    5.157881] BTRFS info (device mmcblk0p2): enabling ssd optimizations
[    5.435198] NET: Registered protocol family 10
[    5.436075] Segment Routing with IPv6
[    5.439038] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.453125] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.453560] systemd[1]: Detected architecture arm.
[    5.470959] systemd[1]: Set hostname to <odroidxu4>.
[    5.853133] systemd[1]: Listening on Journal Socket.
[    5.866731] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.883881] systemd[1]: Created slice System Slice.
[    5.908808] systemd[1]: Starting Set the console keyboard layout...
[    5.926964] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.942917] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.958783] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.341973] usbcore: registered new interface driver ax88179_178a
[    6.348879] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
[    6.350420] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned.
[    6.350924] spidev spi1.0: spidev spi1.0 1000kHz 8 bits mode=0x00
[    6.350936] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    6.351123] spidev spi1.0: Deleting spi1.0
[    6.351581] fbtft_device: GPIOS used by 'hktft9340':
[    6.351586] fbtft_device: 'reset' = GPIO21
[    6.351591] fbtft_device: 'dc' = GPIO22
[    6.351596] fbtft_device: 'led' = GPIO18
[    6.351604] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    6.351612] spi spi1.0: fb_ili9340 spi1.0 35000kHz 8 bits mode=0x00
[    6.387275] random: crng init done
[    6.387296] random: 7 urandom warning(s) missed due to ratelimiting
[    6.508359] BTRFS warning (device mmcblk0p2): excessive commit interval 600
[    6.508369] BTRFS info (device mmcblk0p2): use lzo compression
[    6.508377] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    7.023366] systemd-journald[316]: Received request to flush runtime journal from PID 1
[    7.309270] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[    7.311902] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[    7.311913] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[    7.314151] Driver for 1-wire Dallas network protocol.
[    7.416849] fb_ili9340: module is from the staging directory, the quality is unknown, you have been warned.
[    7.653310] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,errors=remount-ro
[    7.899205] Console: switching to colour frame buffer device 40x15
[    7.900415] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB buffer memory, fps=20, spi1.0 at 35 MHz
[   24.322657] usb 4-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[   24.344541] usb 4-1.2: New USB device found, idVendor=152d, idProduct=0561
[   24.344584] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[   24.344616] usb 4-1.2: Product: ODROID
[   24.344647] usb 4-1.2: SerialNumber: DB01234567E5
[   24.348631] usb 4-1.2: UAS is blacklisted for this device, using usb-storage instead
[   24.348722] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[   24.352031] usb-storage 4-1.2:1.0: Quirks match for vid 152d pid 0561: 800000
[   24.352402] scsi host0: usb-storage 4-1.2:1.0
[   24.362962] usbcore: registered new interface driver uas
[   25.380983] scsi 0:0:0:0: Direct-Access     ODROID                    0004 PQ: 0 ANSI: 6
[   25.384089] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[   25.384938] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[   25.385293] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   25.386197] sd 0:0:0:0: [sda] Write Protect is off
[   25.386255] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[   25.387400] sd 0:0:0:0: [sda] No Caching mode page found
[   25.387461] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   25.450811]  sda: sda1
[   25.453918] sd 0:0:0:0: [sda] Attached SCSI disk
[   26.689472] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[   28.715453] zram: Added device: zram0
[   28.716631] zram: Added device: zram1
[   28.717253] zram: Added device: zram2
[   28.719923] zram: Added device: zram3
[   28.720623] zram: Added device: zram4
[   28.721275] zram: Added device: zram5
[   28.721855] zram: Added device: zram6
[   28.722577] zram: Added device: zram7
[   28.810287] zram0: detected capacity change from 0 to 130867200
[   28.827479] nr_pdflush_threads exported in /proc is scheduled for removal
[   28.855569] Adding 127796k swap on /dev/zram0.  Priority:5 extents:1 across:127796k SS
[   28.860144] zram1: detected capacity change from 0 to 130867200
[   28.892760] Adding 127796k swap on /dev/zram1.  Priority:5 extents:1 across:127796k SS
[   28.895015] zram2: detected capacity change from 0 to 130867200
[   28.923265] Adding 127796k swap on /dev/zram2.  Priority:5 extents:1 across:127796k SS
[   28.924865] zram3: detected capacity change from 0 to 130867200
[   28.947873] Adding 127796k swap on /dev/zram3.  Priority:5 extents:1 across:127796k SS
[   28.949588] zram4: detected capacity change from 0 to 130867200
[   28.975703] Adding 127796k swap on /dev/zram4.  Priority:5 extents:1 across:127796k SS
[   28.977560] zram5: detected capacity change from 0 to 130867200
[   28.998405] Adding 127796k swap on /dev/zram5.  Priority:5 extents:1 across:127796k SS
[   29.000563] zram6: detected capacity change from 0 to 130867200
[   29.029565] Adding 127796k swap on /dev/zram6.  Priority:5 extents:1 across:127796k SS
[   29.031386] zram7: detected capacity change from 0 to 130867200
[   29.059200] Adding 127796k swap on /dev/zram7.  Priority:5 extents:1 across:127796k SS
[   29.515135] NFSD: starting 90-second grace period (net c0b4a280)
[   29.736537] IPv6: ADDRCONF(NETDEV_UP): enx001e0636d99f: link is not ready
[   29.741463] IPv6: ADDRCONF(NETDEV_UP): enx001e0636d99f: link is not ready
[   29.762637] r8152 6-1:1.0 enx001e0636d99f: carrier on
[   29.762710] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e0636d99f: link becomes ready
[   35.497494] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
root@odroidxu4:~# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
root@odroidxu4:~# lsusb
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@odroidxu4:~# reboot
Connection to 192.168.0.20 closed by remote host.
Connection to 192.168.0.20 closed.

C:\Users\USER>ssh root@192.168.0.20
ssh: connect to host 192.168.0.20 port 22: Connection refused

C:\Users\USER>ssh root@192.168.0.20
ssh: connect to host 192.168.0.20 port 22: Connection timed out

C:\Users\USER>ssh root@192.168.0.20
ssh: connect to host 192.168.0.20 port 22: Connection timed out

C:\Users\USER>ssh root@192.168.0.20
root@192.168.0.20's password:
  ___      _           _     _  __  ___   _ _  _
 / _ \  __| |_ __ ___ (_) __| | \ \/ / | | | || |
| | | |/ _` | '__/ _ \| |/ _` |  \  /| | | | || |_
| |_| | (_| | | | (_) | | (_| |  /  \| |_| |__   _|
 \___/ \__,_|_|  \___/|_|\__,_| /_/\_\\___/   |_|

Welcome to Debian Stretch with Armbian Linux 4.14.133-odroidxu4
System load:   2.05 0.80 0.30   Up time:       2 min
Memory usage:  5 % of 1996MB    IP:            192.168.0.20
CPU temp:      56°C
Usage of /:    11% of 7.4G

Last login: Mon Aug 12 04:22:36 2019 from 192.168.0.12

root@odroidxu4:~# lsusb
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@odroidxu4:~# ./q.sh
Okay. You did it already. You don't need to try it
Okay. You did it already. You don't need to try it
grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
ERROR : This is a script to fix HDD disconnected from the system,
        when you access S.M.A.R.T information.
        Read me using any text editor and fix it
You have to see "Okay" three times
If you got an ERROR even one time, please modify the files by hand
1. /usr/share/php/openmediavault/system/storage/smartinformation.inc
2. /usr/share/openmediavault/engined/rpc/smart.inc
3. /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc
root@odroidxu4:~# lsusb
Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@odroidxu4:~# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
root@odroidxu4:~# ./q.sh
Okay. You did it already. You don't need to try it
Okay. You did it already. You don't need to try it
grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
ERROR : This is a script to fix HDD disconnected from the system,
        when you access S.M.A.R.T information.
        Read me using any text editor and fix it
You have to see "Okay" three times
If you got an ERROR even one time, please modify the files by hand
1. /usr/share/php/openmediavault/system/storage/smartinformation.inc
2. /usr/share/openmediavault/engined/rpc/smart.inc
3. /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc
root@odroidxu4:~# ssmartctl
No command 'ssmartctl' found, did you mean:
 Command 'smartctl' from package 'smartmontools' (main)
ssmartctl: command not found
root@odroidxu4:~# smartctl
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.133-odroidxu4] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

ERROR: smartctl requires a device name as the final command-line argument.


Use smartctl -h to get a usage summary

root@odroidxu4:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.14.133-odroidxu4 (root@ubuntu4armbian) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #2 SMP PREEMPT Tue Jul 16 19:33:01 CEST 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=50c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000] free_area_init_node: node 0, pgdat c0b504c0, node_mem_map eee25000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:31
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 16 pages/cpu s36236 r8192 d21108 u65536
[    0.000000] pcpu-alloc: s36236 r8192 d21108 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 consoleblank=0 loglevel=1 panic=10 root=UUID=d0da7bbe-e3af-4588-8715-aa5c4478eb88 rootfstype=btrfs rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  usb-storage.quirks=0x152d:0x0561:u s5p_mfc.mem=16M
[    0.000000] hdmi: using HDMI mode
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1906556K/2074624K available (6144K kernel code, 325K rwdata, 2316K rodata, 1024K init, 344K bss, 36996K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0xc0008000 - 0xc0700000   (7136 kB)
                     .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
                     .data : 0xc0b00000 - 0xc0b51520   ( 326 kB)
                      .bss : 0xc0b5b028 - 0xc0bb10e8   ( 345 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] hperf_hmp: fast CPUs mask: 000000F0
[    0.000000] hperf_hmp: slow CPUs mask: 0000000F
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000026] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001563] Console: colour dummy device 80x30
[    0.001581] console [tty1] enabled
[    0.001609] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001624] pid_max: default: 32768 minimum: 301
[    0.001760] Security Framework initialized
[    0.001773] AppArmor: AppArmor disabled by boot time parameter
[    0.001828] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001847] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002588] CPU: Testing write buffer coherency: ok
[    0.003383] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.016053] Setting up static identity map for 0x40100000 - 0x40100054
[    0.016657] ARM CCI driver probed
[    0.016877] Exynos MCPM support installed
[    0.023994] Hierarchical SRCU implementation.
[    0.039990] smp: Bringing up secondary CPUs ...
[    0.068321] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.092294] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.120291] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.148298] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.148306] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.168293] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.168300] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.176565] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.176572] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.184570] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.184576] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.184780] smp: Brought up 1 node, 8 CPUs
[    0.184793] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.184799] CPU: All CPU(s) started in HYP mode.
[    0.184803] CPU: Virtualization extensions available.
[    0.186529] devtmpfs: initialized
[    0.203514] random: get_random_u32 called from bucket_table_alloc+0xa7/0x174 with crng_init=0
[    0.204090] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.204215] hperf_hmp: registered cpufreq transition notifier
[    0.204395] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.204411] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.207099] xor: measuring software checksum speed
[    0.243974]    arm4regs  :  1533.000 MB/sec
[    0.283970]    8regs     :  1246.000 MB/sec
[    0.323969]    32regs    :  1311.000 MB/sec
[    0.363971]    neon      :  2240.000 MB/sec
[    0.363979] xor: using function: neon (2240.000 MB/sec)
[    0.363998] pinctrl core: initialized pinctrl subsystem
[    0.366062] NET: Registered protocol family 16
[    0.370369] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.376305] random: fast init done
[    0.376357] cpuidle: using governor menu
[    0.385125] exynos-audss-clk 3810000.audss-clock-controller: epll 180633609
[    0.406392] EXYNOS5420 PMU initialized
[    0.516175] raid6: int32x1  gen()   180 MB/s
[    0.584080] raid6: int32x1  xor()   177 MB/s
[    0.651995] raid6: int32x2  gen()   260 MB/s
[    0.720097] raid6: int32x2  xor()   232 MB/s
[    0.788084] raid6: int32x4  gen()   337 MB/s
[    0.856024] raid6: int32x4  xor()   258 MB/s
[    0.924032] raid6: int32x8  gen()   352 MB/s
[    0.992028] raid6: int32x8  xor()   249 MB/s
[    1.060045] raid6: neonx1   gen()   779 MB/s
[    1.127990] raid6: neonx1   xor()  1028 MB/s
[    1.195993] raid6: neonx2   gen()  1048 MB/s
[    1.264009] raid6: neonx2   xor()  1303 MB/s
[    1.331997] raid6: neonx4   gen()  1447 MB/s
[    1.399991] raid6: neonx4   xor()  1324 MB/s
[    1.468018] raid6: neonx8   gen()  1295 MB/s
[    1.536006] raid6: neonx8   xor()  1185 MB/s
[    1.536014] raid6: using algorithm neonx4 gen() 1447 MB/s
[    1.536021] raid6: .... xor() 1324 MB/s, rmw enabled
[    1.536028] raid6: using neon recovery algorithm
[    1.537880] SCSI subsystem initialized
[    1.538061] usbcore: registered new interface driver usbfs
[    1.538109] usbcore: registered new interface driver hub
[    1.538268] usbcore: registered new device driver usb
[    1.538715] i2c-gpio soc:i2c-hdmi: using pins 177 (SDA) and 178 (SCL)
[    1.539262] s3c-i2c 12c70000.i2c: slave address 0x00
[    1.539275] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz
[    1.539499] s3c-i2c 12c70000.i2c: i2c-1: S3C I2C adapter
[    1.540005] media: Linux media interface: v0.10
[    1.540040] Linux video capture interface: v2.00
[    1.540337] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    1.541153] Advanced Linux Sound Architecture Driver Initialized.
[    1.542507] clocksource: Switched to clocksource mct-frc
[    1.542670] VFS: Disk quotas dquot_6.6.0
[    1.542728] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.554669] NET: Registered protocol family 2
[    1.555205] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.555281] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.555436] TCP: Hash tables configured (established 8192 bind 8192)
[    1.555537] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.555574] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.555860] NET: Registered protocol family 1
[    1.556460] RPC: Registered named UNIX socket transport module.
[    1.556468] RPC: Registered udp transport module.
[    1.556475] RPC: Registered tcp transport module.
[    1.556482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.556663] Trying to unpack rootfs image as initramfs...
[    1.918248] Freeing initrd memory: 6160K
[    1.919838] audit: initializing netlink subsys (disabled)
[    1.920053] audit: type=2000 audit(1.916:1): state=initialized audit_enabled=0 res=1
[    1.920241] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.928221] NFS: Registering the id_resolver key type
[    1.928243] Key type id_resolver registered
[    1.928251] Key type id_legacy registered
[    1.928268] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.928281] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.928969] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.929642] aufs 4.14.73+-20181119
[    1.935507] bounce: pool size: 64 pages
[    1.935553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.935749] io scheduler noop registered
[    1.935758] io scheduler deadline registered
[    1.935903] io scheduler cfq registered (default)
[    1.935912] io scheduler mq-deadline registered
[    1.935920] io scheduler kyber registered
[    1.938289] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.939270] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.939345] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.939669] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.939731] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.944735] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    1.944747] dma-pl330 3880000.adma:  DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    1.947249] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.947261] dma-pl330 121a0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.949474] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.949485] dma-pl330 121b0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.950219] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.950230] dma-pl330 10800000.mdma:         DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    2.008772] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.011020] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    2.011405] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    2.011760] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    2.011852] console [ttySAC2] enabled
[    2.012204] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    2.014317] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu
[    2.014371] iommu: Adding device 14450000.mixer to group 0
[    2.016046] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[    2.016748] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    2.016866] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    2.016925] iommu: Adding device 10850000.g2d to group 1
[    2.017304] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully probed.
[    2.018421] exynos-rot 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.018472] iommu: Adding device 11c00000.rotator to group 2
[    2.018871] exynos-rot 11c00000.rotator: The exynos rotator is probed successfully
[    2.019627] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.023835] mali 11800000.mali: Continuing without Mali regulator control
[    2.024595] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    2.025107] mali 11800000.mali: Protected mode not available
[    2.025503] devfreq devfreq0: Couldn't update frequency transition information.
[    2.026127] mali 11800000.mali: Probed as mali0
[    2.035055] brd: module loaded
[    2.044389] loop: module loaded
[    2.045121] libphy: Fixed MDIO Bus: probed
[    2.045484] usbcore: registered new interface driver r8152
[    2.045530] usbcore: registered new interface driver cdc_ether
[    2.045567] usbcore: registered new interface driver cdc_subset
[    2.047895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.047905] ehci-exynos: EHCI EXYNOS driver
[    2.048258] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.048453] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.048710] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000
[    2.062537] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.062748] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.062759] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.062769] usb usb1: Product: EHCI Host Controller
[    2.062779] usb usb1: Manufacturer: Linux 4.14.133-odroidxu4 ehci_hcd
[    2.062788] usb usb1: SerialNumber: 12110000.usb
[    2.063323] hub 1-0:1.0: USB hub found
[    2.063362] hub 1-0:1.0: 3 ports detected
[    2.064239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.064268] ohci-exynos: OHCI EXYNOS driver
[    2.064483] exynos-ohci 12120000.usb: USB Host Controller
[    2.064674] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.064787] exynos-ohci 12120000.usb: irq 80, io mem 0x12120000
[    2.126768] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.126779] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.126788] usb usb2: Product: USB Host Controller
[    2.126797] usb usb2: Manufacturer: Linux 4.14.133-odroidxu4 ohci_hcd
[    2.126807] usb usb2: SerialNumber: 12120000.usb
[    2.127298] hub 2-0:1.0: USB hub found
[    2.127338] hub 2-0:1.0: 3 ports detected
[    2.128869] usbcore: registered new interface driver usb-storage
[    2.129573] mousedev: PS/2 mouse device common for all mice
[    2.131444] i2c /dev entries driver
[    2.146778] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.164164] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    2.182301] vdd_ldo30: Bringing 1800000uV into 3300000-3300000uV
[    2.209729] vdd_1.8v_ldo: Bringing 1850000uV into 1500000-1500000uV
[    3.240727] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    3.243601] IR NEC protocol handler initialized
[    3.243608] IR RC5(x/sz) protocol handler initialized
[    3.243615] IR RC6 protocol handler initialized
[    3.243622] IR JVC protocol handler initialized
[    3.243630] IR Sony protocol handler initialized
[    3.243637] IR SANYO protocol handler initialized
[    3.243643] IR Sharp protocol handler initialized
[    3.243651] IR MCE Keyboard/mouse protocol handler initialized
[    3.243658] IR XMP protocol handler initialized
[    3.244396] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    3.244448] iommu: Adding device 11f50000.jpeg to group 3
[    3.244810] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video30
[    3.244968] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video31
[    3.244976] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    3.245195] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    3.245245] iommu: Adding device 11f60000.jpeg to group 4
[    3.245586] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video32
[    3.245740] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video33
[    3.245748] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    3.246862] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    3.246999] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    3.247060] iommu: Adding device 11000000.codec to group 5
[    3.265007] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    3.265111] (NULL device *): Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.265123] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.265297] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[    3.265439] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[    3.266836] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.266888] iommu: Adding device 13e00000.video-scaler to group 6
[    3.268068] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.268119] iommu: Adding device 13e10000.video-scaler to group 7
[    3.287866] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.288743] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.289655] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.290617] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.291564] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.292232] device-mapper: uevent: version 1.0.3
[    3.292555] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.302050] sdhci: Secure Digital Host Controller Interface driver
[    3.302057] sdhci: Copyright(c) Pierre Ossman
[    3.302459] Synopsys Designware Multimedia Card Interface Driver
[    3.303799] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    3.303952] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    3.303968] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    3.304033] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
[    3.304328] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[    3.327067] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.347602] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.347675] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.347696] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.347777] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
[    3.372138] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.395269] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.395729] hidraw: raw HID events driver (C) Jiri Kosina
[    3.396098] usbcore: registered new interface driver usbhid
[    3.396105] usbhid: USB HID core driver
[    3.411434] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.411551] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.411671] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.411787] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.416727] NET: Registered protocol family 17
[    3.416749] NET: Registered protocol family 15
[    3.416805] Key type dns_resolver registered
[    3.417375] Registering SWP/SWPB emulation handler
[    3.417865] registered taskstats version 1
[    3.418640] Btrfs loaded, crc32c=crc32c-generic
[    3.426416] Key type encrypted registered
[    3.450250] OF: graph: no port node found in /soc/hdmi@14530000
[    3.451172] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[    3.451305] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0771ff4)
[    3.451319] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0772694)
[    3.451324] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.451328] [drm] No driver support for vblank timestamp query.
[    3.451451] [drm] Cannot find any crtc or sizes
[    3.451851] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0
[    3.452105] [drm] Cannot find any crtc or sizes
[    3.454007] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.454145] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[    3.454395] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.454429] xhci-hcd xhci-hcd.3.auto: irq 150, io mem 0x12000000
[    3.454635] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.454642] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.454649] usb usb3: Product: xHCI Host Controller
[    3.454654] usb usb3: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.454660] usb usb3: SerialNumber: xhci-hcd.3.auto
[    3.454987] hub 3-0:1.0: USB hub found
[    3.455010] hub 3-0:1.0: 1 port detected
[    3.455229] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    3.455328] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    3.455338] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0  SuperSpeed
[    3.455398] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.455500] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.455506] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.455512] usb usb4: Product: xHCI Host Controller
[    3.455522] usb usb4: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.455527] usb usb4: SerialNumber: xhci-hcd.3.auto
[    3.455840] hub 4-0:1.0: USB hub found
[    3.455868] hub 4-0:1.0: 1 port detected
[    3.458300] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    3.458430] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[    3.458694] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.458727] xhci-hcd xhci-hcd.6.auto: irq 151, io mem 0x12400000
[    3.458859] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.458865] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.458871] usb usb5: Product: xHCI Host Controller
[    3.458876] usb usb5: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.458882] usb usb5: SerialNumber: xhci-hcd.6.auto
[    3.459173] hub 5-0:1.0: USB hub found
[    3.459197] hub 5-0:1.0: 1 port detected
[    3.459401] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    3.459506] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[    3.459515] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0  SuperSpeed
[    3.459572] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.459672] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.459679] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.459688] usb usb6: Product: xHCI Host Controller
[    3.459694] usb usb6: Manufacturer: Linux 4.14.133-odroidxu4 xhci-hcd
[    3.459699] usb usb6: SerialNumber: xhci-hcd.6.auto
[    3.460003] hub 6-0:1.0: USB hub found
[    3.460028] hub 6-0:1.0: 1 port detected
[    3.461329] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.461403] rtc rtc1: invalid alarm value: 1900-1-1 0:0:0
[    3.461510] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[    3.462759] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    3.463238] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    3.463576] exynos-bus: new bus device registered: soc:bus_fsys_apb (200000 KHz ~ 200000 KHz)
[    3.463858] exynos-bus: new bus device registered: soc:bus_fsys (200000 KHz ~ 200000 KHz)
[    3.464277] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    3.464786] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    3.465252] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    3.465598] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    3.466099] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    3.466615] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    3.467079] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    3.467543] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    3.467930] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    3.468350] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    3.468771] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    3.469281] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    3.469676] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    3.469703] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    3.470354] odroid-audio sound: multicodec <-> 3830000.i2s mapping ok
[    3.472150] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    3.474943] s5m-rtc s2mps14-rtc: setting system clock to 2019-08-12 04:27:59 UTC (1565584079)
[    3.477481] ALSA device list:
[    3.477488]   #0: Odroid-XU4
[    3.479510] Freeing unused kernel memory: 1024K
[    3.500332] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.501218] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[    3.501486] mmc_host mmc0: Bus speed (slot 0) = 266666666Hz (slot req 200000000Hz, actual 133333333HZ div = 1)
[    3.501727] mmc0: new HS400 MMC card at address 0001
[    3.502232] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[    3.502574] mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB
[    3.502833] mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB
[    3.503078] mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB
[    3.503792]  mmcblk0: p1 p2 p3
[    3.521810] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.522217] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.522282] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.790563] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.947719] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[    3.947726] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.947731] usb 3-1: Product: USB2.0 Hub
[    3.947737] usb 3-1: Manufacturer: GenesysLogic
[    3.967839] hub 3-1:1.0: USB hub found
[    3.968284] hub 3-1:1.0: 2 ports detected
[    4.074696] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.097546] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616
[    4.097553] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.097559] usb 4-1: Product: USB3.0 Hub
[    4.097565] usb 4-1: Manufacturer: GenesysLogic
[    4.111974] hub 4-1:1.0: USB hub found
[    4.112286] hub 4-1:1.0: 2 ports detected
[    4.286704] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd
[    4.554783] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.576566] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
[    4.576605] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.576637] usb 6-1: Product: USB 10/100/1000 LAN
[    4.576668] usb 6-1: Manufacturer: Realtek
[    4.576697] usb 6-1: SerialNumber: 000001000000
[    4.739954] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    4.811833] r8152 6-1:1.0 eth0: v1.09.9
[    4.840985] r8152 6-1:1.0 enx001e0636d99f: renamed from eth0
[    4.899210] async_tx: api initialized (async)
[    5.044953] BTRFS: device fsid d0da7bbe-e3af-4588-8715-aa5c4478eb88 devid 1 transid 2402 /dev/mmcblk0p2
[    5.050718] usb 4-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[    5.073112] usb 4-1.2: New USB device found, idVendor=152d, idProduct=0561
[    5.073152] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    5.073183] usb 4-1.2: Product: ODROID
[    5.073213] usb 4-1.2: SerialNumber: DB01234567E5
[    5.085579] usb 4-1.2: UAS is blacklisted for this device, using usb-storage instead
[    5.085766] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[    5.088301] usb-storage 4-1.2:1.0: Quirks match for vid 152d pid 0561: 800000
[    5.088615] scsi host0: usb-storage 4-1.2:1.0
[    5.092343] usbcore: registered new interface driver uas
[    5.134235] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    5.134245] BTRFS info (device mmcblk0p2): has skinny extents
[    5.146403] BTRFS info (device mmcblk0p2): enabling ssd optimizations
[    5.428452] NET: Registered protocol family 10
[    5.429549] Segment Routing with IPv6
[    5.432236] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.444556] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.444932] systemd[1]: Detected architecture arm.
[    5.463044] systemd[1]: Set hostname to <odroidxu4>.
[    5.856906] systemd[1]: Created slice System Slice.
[    5.871755] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.886819] systemd[1]: Listening on udev Kernel Socket.
[    5.904166] systemd[1]: Created slice system-getty.slice.
[    5.918837] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.935247] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.956715] systemd[1]: Mounting POSIX Message Queue File System...
[    6.116302] scsi 0:0:0:0: Direct-Access     ODROID                    0004 PQ: 0 ANSI: 6
[    6.118197] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.230926] BTRFS warning (device mmcblk0p2): excessive commit interval 600
[    6.230936] BTRFS info (device mmcblk0p2): use lzo compression
[    6.230945] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    6.282705] random: crng init done
[    6.282716] random: 7 urandom warning(s) missed due to ratelimiting
[    6.340776] usbcore: registered new interface driver ax88179_178a
[    6.346329] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
[    6.347870] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned.
[    6.348225] spidev spi1.0: spidev spi1.0 1000kHz 8 bits mode=0x00
[    6.348236] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    6.348415] spidev spi1.0: Deleting spi1.0
[    6.348967] fbtft_device: GPIOS used by 'hktft9340':
[    6.348975] fbtft_device: 'reset' = GPIO21
[    6.348981] fbtft_device: 'dc' = GPIO22
[    6.348987] fbtft_device: 'led' = GPIO18
[    6.348995] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    6.349004] spi spi1.0: fb_ili9340 spi1.0 35000kHz 8 bits mode=0x00
[    7.028356] systemd-journald[306]: Received request to flush runtime journal from PID 1
[    7.144310] fb_ili9340: module is from the staging directory, the quality is unknown, you have been warned.
[    7.389761] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[    7.389933] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[    7.389940] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[    7.398619] Driver for 1-wire Dallas network protocol.
[    7.624029] Console: switching to colour frame buffer device 40x15
[    7.624247] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB buffer memory, fps=20, spi1.0 at 35 MHz
[    8.449577] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,errors=remount-ro
[   23.022871] sd 0:0:0:0: [sda] Unit Not Ready
[   23.022919] sd 0:0:0:0: [sda] Sense Key : 0x4 [current]
[   23.022962] sd 0:0:0:0: [sda] ASC=0x44 ASCQ=0x0
[   23.023682] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[   23.024380] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[   54.334822] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd
[   54.355794] sd 0:0:0:0: [sda] Write Protect is off
[   54.355815] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[   85.054846] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd
[   85.076027] sd 0:0:0:0: [sda] Asking for cache data failed
[   85.076058] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   88.029601] sd 0:0:0:0: [sda] Unit Not Ready
[   88.029650] sd 0:0:0:0: [sda] Sense Key : 0x4 [current]
[   88.029692] sd 0:0:0:0: [sda] ASC=0x44 ASCQ=0x0
[   98.004138] zram: Added device: zram0
[   98.004885] zram: Added device: zram1
[   98.005638] zram: Added device: zram2
[   98.006277] zram: Added device: zram3
[   98.017283] zram: Added device: zram4
[   98.018338] zram: Added device: zram5
[   98.018979] zram: Added device: zram6
[   98.019327] zram: Added device: zram7
[   98.074182] zram0: detected capacity change from 0 to 130867200
[   98.110266] Adding 127796k swap on /dev/zram0.  Priority:5 extents:1 across:127796k SS
[   98.116623] zram1: detected capacity change from 0 to 130867200
[   98.144503] Adding 127796k swap on /dev/zram1.  Priority:5 extents:1 across:127796k SS
[   98.146580] zram2: detected capacity change from 0 to 130867200
[   98.174639] Adding 127796k swap on /dev/zram2.  Priority:5 extents:1 across:127796k SS
[   98.176042] zram3: detected capacity change from 0 to 130867200
[   98.197002] Adding 127796k swap on /dev/zram3.  Priority:5 extents:1 across:127796k SS
[   98.199103] zram4: detected capacity change from 0 to 130867200
[   98.226765] Adding 127796k swap on /dev/zram4.  Priority:5 extents:1 across:127796k SS
[   98.228468] zram5: detected capacity change from 0 to 130867200
[   98.253229] Adding 127796k swap on /dev/zram5.  Priority:5 extents:1 across:127796k SS
[   98.254759] zram6: detected capacity change from 0 to 130867200
[   98.282300] Adding 127796k swap on /dev/zram6.  Priority:5 extents:1 across:127796k SS
[   98.284567] zram7: detected capacity change from 0 to 130867200
[   98.305478] Adding 127796k swap on /dev/zram7.  Priority:5 extents:1 across:127796k SS
[   98.315116] nr_pdflush_threads exported in /proc is scheduled for removal
[   98.639369] NFSD: starting 90-second grace period (net c0b4a280)
[   99.009286] IPv6: ADDRCONF(NETDEV_UP): enx001e0636d99f: link is not ready
[   99.021430] IPv6: ADDRCONF(NETDEV_UP): enx001e0636d99f: link is not ready
[   99.063458] r8152 6-1:1.0 enx001e0636d99f: carrier on
[   99.063502] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e0636d99f: link becomes ready
[  104.489417] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[  119.870600] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd
[  152.642649] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd
[  183.362639] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd

뭔가 제가 한것들 외에 또 시도해 볼만한 것 있을까요?

neal
Posts: 190
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 4 times
Contact:

Re: XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by neal » Mon Aug 12, 2019 6:30 pm

CS2 와 XU4 모두 정상적이고 연결이 이상이 없다면, 두가지 정도 의심이 됩니다.

1. JMS561 RAID chip 업그레이드 후, 전원 off 를 하고 난 후, 2 ~ 3 초정도 15v 아답터를 뽑은 후 다시 꽂아 주셔야 새로운 펌웨어가 적용됩니다.
말씀하신 문제가 물리적으로 코드를 뽑았다 재연결하고 난 후에도 계속 발생된 것인지요?

2. 혹시 RAID 변경을 하셨는 지요?
RAID 변경시 CS2 에 연결된 HDD 가 변경된 RAID 를 적용하기 위해 꽤(4TB 정도 RAID 2 로 변경시 24시간 이상으로 기억합니다.) 오랫동안 작업을 합니다.
RAID manager(https://wiki.odroid.com/accessory/add-o ... le_version) 로 상태를 체크 하실 수 있습니다.

확인하시고 이상이 있으면 다시 알려주세요.

harddrop
Posts: 4
Joined: Mon Aug 12, 2019 12:11 pm
languages_spoken: english, korean
ODROIDs: XU4+CS2
H2
Has thanked: 0
Been thanked: 0
Contact:

Re: XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by harddrop » Mon Aug 12, 2019 9:31 pm

neal wrote:
Mon Aug 12, 2019 6:30 pm
CS2 와 XU4 모두 정상적이고 연결이 이상이 없다면, 두가지 정도 의심이 됩니다.

1. JMS561 RAID chip 업그레이드 후, 전원 off 를 하고 난 후, 2 ~ 3 초정도 15v 아답터를 뽑은 후 다시 꽂아 주셔야 새로운 펌웨어가 적용됩니다.
말씀하신 문제가 물리적으로 코드를 뽑았다 재연결하고 난 후에도 계속 발생된 것인지요?

2. 혹시 RAID 변경을 하셨는 지요?
RAID 변경시 CS2 에 연결된 HDD 가 변경된 RAID 를 적용하기 위해 꽤(4TB 정도 RAID 2 로 변경시 24시간 이상으로 기억합니다.) 오랫동안 작업을 합니다.
RAID manager(https://wiki.odroid.com/accessory/add-o ... le_version) 로 상태를 체크 하실 수 있습니다.

확인하시고 이상이 있으면 다시 알려주세요.
1. 네. 펌웨어 업데이트 후 잠시 전원을 분리했다 재연결해도 문제가 발생합니다. 애초에 펌업을 진행한 컴퓨터와 CS2가 동작할 장소가 조금 떨어져 있어 펌업후 전원을 분리할 수밖에 없게 되어있습니다. 현재 레이드 매니저 프로그램으로 확인한 결과 펌웨어 버전은 V9E.01.00.04로 나옵니다.
수정)전원을 끊었다 연결하면 모든게 이상없이 잘 됩니다만 그상태에서 전원 연결을 끊지 않고 soft reboot 시 하드디스크가 인식되지 않고 사라집니다.
전원을 완전히 끊었다 연결하는 hard reboot시 다시 하드가 잘 인식됩니다.

2. 아니오. CS2구입후 레이드는 전혀 건들지 않았습니다. 현재 장착된 하드디스크가 단 하나이고 - 처음부터 레이드를 구축할 생각이 없었기에 - 레이드 딥스위치는 CS2 개봉 직후 둘다 OFF로 되어있는지(=PM인지)만 확인하고 바로 조립했습니다. 이후 레이드 관련 명령이나 작업은 하지 않았습니다.
링크 주신 레이드 매니저로 컨트롤러 정보를 표시하는 명령을 실행해 본 결과입니다.

Code: Select all

JMS56X>DC C0

Controller[0]
-- ChipID       = 10
-- SerialNumber = 427491329
-- SuperUserPwd = ��������
-- Sata[1]
------ ModelName    = WDC WD80EMAZ-00WJTA0           
------ SerialNumber = 7SJNBK8U
------ FirmwareVer  = 83.H0A83
------ Capacity     = 7452 GB
------ PortType     = RAID Disk
------ PortSpeed    = Gen 3
------ Page0State   = Hooked to PM
------ Page0RaidIdx = 0
------ Page0MbrIdx  = 0
추가로 확인해야할 정보가 있다면 알려주세요.

neal
Posts: 190
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 4 times
Contact:

Re: XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by neal » Tue Aug 13, 2019 10:40 am

1. 혹시 HDD 가 여유가 있다면, 교체해서 테스트 부탁드립니다.
2. OMV 대신 wiki 에 있는 xu4_cloudshell2 - software setting(https://wiki.odroid.com/accessory/add-o ... e_settings) 으로 셋업 한번 부탁드릴 수 있을 까요?
같은 현상이 발생되는 지 궁금합니다.
harddrop wrote:
Mon Aug 12, 2019 2:09 pm
사용 환경:
ODROID XU4 + cloudshell2(CS2)
WD White 8TB HDD (WD easystore에서 적출, 정상작동 확인, 포멧: EXT4)
RAID: PM
OMV4 (https://wiki.odroid.com/accessory/add-o ... _vault_omv이 문서의 절차를 따라 eMMC에 설치)
위 환경으로 셋업해서 결과 공유하겠습니다.

harddrop
Posts: 4
Joined: Mon Aug 12, 2019 12:11 pm
languages_spoken: english, korean
ODROIDs: XU4+CS2
H2
Has thanked: 0
Been thanked: 0
Contact:

Re: XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by harddrop » Tue Aug 13, 2019 5:13 pm

1. 현재 남아도는 다른 하드가 없어 불가능합니다.
2. 올려주신 링크에서 받은 우분투에선 해당 현상이 발생하지 않습니다. OMV에서만 이러는거 같네요

neal
Posts: 190
Joined: Fri Apr 14, 2017 10:02 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 4 times
Contact:

Re: XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by neal » Wed Aug 14, 2019 5:44 pm

WD white 8TB HDD 가 없어서 WD Red WD40EFRX HDD + OMV4 를 가지고 테스트를 진행해 보았습니다.
기존 HDD 가 NTFS 포멧으로 되어 있었고, 시스템에 마운트를 하지 않고 테스트를 진행했습니다.
몇 번 리부팅 시도에는 HDD 가 인식을 했으나 ( Web OMV - 저장소 - 디스크 에서 장치 인식 ), 한 번은 HDD parking 이 잘 안되었는 지, 부팅시 파일 시스템 체크를 하더군요.
그 후로는 전원어댑터를 뺏다 다시 꽂아야 HDD 를 인식을 했습니다. 같은 증상이라 여겨집니다.

그래서 저는 아래와 같은 방법으로 시도를 했고, 지금은 20번이상 리부팅을 시도 했는 데, 이상이 없습니다.

1. https://wiki.odroid.com/accessory/add-o ... e_settings 를 참고하여 다시 처음부터 셋업을 했습니다.
리부팅을 몇 번 시도해 보고, 해당 증상이 없음을 확인했습니다.

2. emmc 에 OMV 최신 버전을 다시 인스톨 했습니다.

3. apt 로 cloudshell2 유틸 및 최신 커널, 최신 OMV 로 업데이트를 했습니다.

Code: Select all

root@odroidxu4:~# cat /etc/issue
openmediavault 4.1.23-1 (Arrakis) \n \l
Copyright (C) 2009-2019 by Volker Theile. All rights reserved.

To manage the system visit the openmediavault web control panel:

enx001e0631ab76: 192.168.30.16

By default the web control panel administrator account has the
username 'admin' and password 'openmediavault'.
It is recommended that you change the password for this account
within the web control panel or using the 'omv-firstaid' CLI
command.

For more information regarding this appliance, please visit the
web site: https://www.openmediavault.org

root@odroidxu4:~# uname -a
Linux odroidxu4 4.14.133-odroidxu4 #2 SMP PREEMPT Tue Jul 16 19:33:01 CEST 2019 armv7l GNU/Linux
root@odroidxu4:~#
아마도 mkfs.ext4 로 HDD 를 깨끗하게 포멧한 것이 원인이 아닌가 추측합니다.
시간이 되시면, 시도해 보시고 결과 알려주세요.

harddrop
Posts: 4
Joined: Mon Aug 12, 2019 12:11 pm
languages_spoken: english, korean
ODROIDs: XU4+CS2
H2
Has thanked: 0
Been thanked: 0
Contact:

Re: XU4+Cloudshell2에서 OMV 사용중 재부팅 시 HDD가 마운트되지 않습니다.

Unread post by harddrop » Thu Aug 15, 2019 5:17 pm

1. 우분투에서는 해당 문제가 발생하지 않습니다. 이 과정에서 포멧을 하였습니다.
2. OMV를 설치하니 바로 문제가 발생했습니다.
3. 업데이트를 해도 달라지는 것은 없었습니다.

+OMV의 기반인 armbian stretch에서도 해당 문제가 발생함을 확인하였습니다.

+하드 미인식시 dmesg에서 unit not ready란 오류가 뜨는걸 확인했는데

Code: Select all

[ 23.022871] sd 0:0:0:0: [sda] Unit Not Ready 
[ 23.022919] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] 
[ 23.022962] sd 0:0:0:0: [sda] ASC=0x44 ASCQ=0x0 
[ 23.023682] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). 
[ 23.024380] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) 
[ 54.334822] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd 
[ 54.355794] sd 0:0:0:0: [sda] Write Protect is off
[ 54.355815] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 
[ 85.054846] usb 4-1.2: reset SuperSpeed USB device number 3 using xhci-hcd 
[ 85.076027] sd 0:0:0:0: [sda] Asking for cache data failed 
[ 85.076058] sd 0:0:0:0: [sda] Assuming drive cache: write through 
[ 88.029601] sd 0:0:0:0: [sda] Unit Not Ready 
[ 88.029650] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] 
[ 88.029692] sd 0:0:0:0: [sda] ASC=0x44 ASCQ=0x0
검색해보니 하드웨어 문제인거 같기도 하고... 어디서부터 문제인지 감도 안잡히네요.

일단 지금은 최대한 재부팅을 하지 않는 쪽으로 CS2를 운영하고 언젠가 여분의 하드가 생기면 그때 다시 해보려고 합니다.

Post Reply

Return to “XU4/HC1+/HC2/XU3”

Who is online

Users browsing this forum: No registered users and 0 guests