USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Post Reply
RomaT
Posts: 239
Joined: Thu Oct 23, 2014 4:48 pm
languages_spoken: Russian
ODROIDs: -H2 rev.B, -XU3, -XU4, -C1, -C2, -W, -VU, CloudShell
Location: Perm, Russia
Has thanked: 6 times
Been thanked: 44 times
Contact:

USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by RomaT » Thu Jun 13, 2019 4:49 pm

At the request of odroid created a separate topic.
low-cost network speed solutions have appeared,
1. USB 3.0 to 5GbE Adapter QNA-UC5G1T
2. network switches MikroTik CRS305-1G-4S+IN (4xSFP+) or CRS309-1G-8S+IN (8xSFP+) $150...$270
3. module SFP+ MikroTik S+RJ10 (10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps) $65
4. PCI-E x4 network Adapter 10GbE (QNAP, Asus, D-Link ... or other from amazon and aliexpress) $90...$250

User avatar
odroid
Site Admin
Posts: 32570
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 190 times
Been thanked: 355 times
Contact:

Re: USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by odroid » Fri Jun 14, 2019 11:51 am

Thank you for the list of affordable devices.
But we may keep using the network bonding method for a couple of more years.
When we tested the network bonding with H2, we could get around 160~170MB/sec of SAMBA performance with HDDs.
5GBe or 10GBe might be useful, if we change our internal network storage server to SSDs from HDDs.

RomaT
Posts: 239
Joined: Thu Oct 23, 2014 4:48 pm
languages_spoken: Russian
ODROIDs: -H2 rev.B, -XU3, -XU4, -C1, -C2, -W, -VU, CloudShell
Location: Perm, Russia
Has thanked: 6 times
Been thanked: 44 times
Contact:

Re: USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by RomaT » Fri Jun 14, 2019 12:24 pm


User avatar
odroid
Site Admin
Posts: 32570
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 190 times
Been thanked: 355 times
Contact:

Re: USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by odroid » Fri Jun 14, 2019 12:39 pm

Our normal HDD's max transfer speed seems to be limited at 200MB/sec until we make RAID things.

Do you have 5GBe or 10GBe infrastructure in your office or home?

RomaT
Posts: 239
Joined: Thu Oct 23, 2014 4:48 pm
languages_spoken: Russian
ODROIDs: -H2 rev.B, -XU3, -XU4, -C1, -C2, -W, -VU, CloudShell
Location: Perm, Russia
Has thanked: 6 times
Been thanked: 44 times
Contact:

Re: USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by RomaT » Fri Jun 14, 2019 12:53 pm

not yet, but I would like to try or see the tests ...

User avatar
odroid
Site Admin
Posts: 32570
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 190 times
Been thanked: 355 times
Contact:

Re: USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by odroid » Fri Jun 14, 2019 1:01 pm

Okay. Once you try it, share the test results.

User avatar
Mullcom
Posts: 117
Joined: Sun Jun 30, 2019 1:41 am
languages_spoken: english
Has thanked: 64 times
Been thanked: 6 times
Contact:

Re: USB3.0 to 5GBe or M.2 to PCI-E for 10GBe Ethernet

Unread post by Mullcom » Sun Jun 30, 2019 1:56 am

Hello! I am looking into get this H2 be a router at home and try to find add-on card to add 2 fiber connections one to my file server and one to my switch. I hope i fund a awnser to this it's seams to be really nice hardware.

Skickat från min SM-G955F via Tapatalk


Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 10 guests