HC 2 and openmediavault are not playing well together

Post Reply
Nov8tr
Posts: 1
Joined: Sun May 05, 2019 2:03 am
languages_spoken: english
ODROIDs: Odroid home cloud 2
Has thanked: 0
Been thanked: 0
Contact:

HC 2 and openmediavault are not playing well together

Unread post by Nov8tr » Sun May 05, 2019 2:43 am

super noob to Linux here, so please be gentle.
Hardware:
Desktop dell with dual boot. Windows 10, and Ubuntu. Windows is my primary interface until I learn a lot more about Linux.

Odroid HC 2 using a WD 500Gb "blue" hard drive, and a Samsung 32G flash card (setup using balenaetcher) which I am trying to turn into a home file server.

All behind a Netgear A7000 router, with OpenVPN set up and functioning very well.

I followed the online tutorials, and got the HC 2 with openmediavault up and running (so I thought).
Copied all my folders and files, set up users and shares,,,, fat dumb and happy :) All of my devices could see, and interact with the shares. 2 Days of verifying stability over several power cycles (just to be sure). All was well. Then I started to configure the backup system (external 1 Tb USB drive), and the system started throwing errors.
I assumed it was something I did wrong, but everything I tried (checking all the forums I could find) only made things worse.
Started over, and re-flashed the card. this time I tried to load the "add ons" for back up before loading folders and files. Error, after error, Dependency issues, Configuration not complete, Library not found,, on and on.
Every time re-loaded (fresh flash) things just got worse.
I finally booted up Putty and started poking around, trying to bypass the web GUI and do things like you smart guys do.
I tried (on a fresh flash) using the web GUI allowing root privileges, changed admin password, and enabled all SSH options. Logged out of the web GUI, and SSH back in with Putty, changed the root password, and did the following,,,,,

apt-get update (that might have worked,,, not sure)
and
apt-get upgrade
which suggested I do "dpkg --configure -a"
Here is the result

root@odroidxu4:~# apt-get upgrade
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
root@odroidxu4:~# dpkg --configure -a
Setting up perl-modules-5.24 (5.24.1-3+deb9u5) ...
Setting up libapt-inst2.0:armhf (1.4.9) ...
Setting up libperl5.24:armhf (5.24.1-3+deb9u5) ...
Setting up git-man (1:2.11.0-3+deb9u4) ...
dpkg: dependency problems prevent configuration of samba-vfs-modules:
samba-vfs-modules depends on samba-libs (= 2:4.5.16+dfsg-1+deb9u1); however:
Version of samba-libs:armhf on system is 2:4.5.12+dfsg-2+deb9u2.

dpkg: error processing package samba-vfs-modules (--configure):
dependency problems - leaving unconfigured
Processing triggers for mime-support (3.60) ...
Setting up libnss-myhostname:armhf (232-25+deb9u11) ...
Setting up apt-utils (1.4.9) ...
Setting up libldb1:armhf (2:1.1.27-1+deb9u1) ...
Setting up perl (5.24.1-3+deb9u5) ...
Setting up libssh2-1:armhf (1.7.0-1+deb9u1) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Setting up udev (232-25+deb9u11) ...
addgroup: The group `input' already exists as a system group. Exiting.
update-initramfs: deferring update (trigger activated)
Setting up systemd (232-25+deb9u11) ...
addgroup: The group `systemd-journal' already exists as a system group. Exiting.
Processing triggers for man-db (2.7.6.1-2) ...
Processing triggers for dbus (1.10.26-0+deb9u1) ...
dpkg: dependency problems prevent configuration of libpython2.7-stdlib:armhf:
libpython2.7-stdlib:armhf depends on libpython2.7-minimal (= 2.7.13-2+deb9u3); however:
Package libpython2.7-minimal:armhf is not installed.

dpkg: error processing package libpython2.7-stdlib:armhf (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python2.7-minimal:
python2.7-minimal depends on libpython2.7-minimal (= 2.7.13-2+deb9u3); however:
Package libpython2.7-minimal:armhf is not installed.

dpkg: error processing package python2.7-minimal (--configure):
dependency problems - leaving unconfigured
Setting up libcurl3-gnutls:armhf (7.52.1-5+deb9u9) ...
Setting up systemd-sysv (232-25+deb9u11) ...
dpkg: dependency problems prevent configuration of python2.7:
python2.7 depends on python2.7-minimal (= 2.7.13-2+deb9u3); however:
Package python2.7-minimal is not configured yet.
python2.7 depends on libpython2.7-stdlib (= 2.7.13-2+deb9u3); however:
Package libpython2.7-stdlib:armhf is not configured yet.

dpkg: error processing package python2.7 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpython2.7:armhf:
libpython2.7:armhf depends on libpython2.7-stdlib (= 2.7.13-2+deb9u3); however:
Package libpython2.7-stdlib:armhf is not configured yet.

dpkg: error processing package libpython2.7:armhf (--configure):
dependency problems - leaving unconfigured
Setting up git (1:2.11.0-3+deb9u4) ...
dpkg: dependency problems prevent configuration of python-ldb:
python-ldb depends on libpython2.7 (>= 2.7); however:
Package libpython2.7:armhf is not configured yet.

dpkg: error processing package python-ldb (--configure):
dependency problems - leaving unconfigured
Setting up libpam-systemd:armhf (232-25+deb9u11) ...
Processing triggers for initramfs-tools (0.130) ...
update-initramfs: Generating /boot/initrd.img-4.9.103-odroidxu4
I: The initramfs will attempt to resume from /dev/zram7
I: (UUID=4abc720a-ce0e-4904-bf0d-17663a34388f)
I: Set the RESUME variable to override this.
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
update-initramfs: Converting to u-boot format
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Errors were encountered while processing:
samba-vfs-modules
libpython2.7-stdlib:armhf
python2.7-minimal
python2.7
libpython2.7:armhf
python-ldb
root@odroidxu4:~#[/color]


What should I do?
Thanks for helping out a noobie.

User avatar
igorpec
Posts: 297
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 0
Been thanked: 0
Contact:

Re: HC 2 and openmediavault are not playing well together

Unread post by igorpec » Sun May 05, 2019 9:23 pm

Nov8tr wrote:
Sun May 05, 2019 2:43 am
super noob to Linux here, so please be gentle.
I followed the online tutorials, and got the HC 2 with openmediavault up and running (so I thought).
You should stick to OMV ready made images then: https://sourceforge.net/projects/openme ... Computers/

They are Armbian + automated OMV install which is the same as starting from (Debian based) Armbian and installing OMV from armbian-config menu. It works.
ARMBIAN - follow on Twitter
linux for ARM development boards with user friendly development tools

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 1 guest