CloudShell 2 Replacement Parts

Post Reply
User avatar
noobs4u
Posts: 100
Joined: Fri Apr 01, 2016 1:56 am
languages_spoken: english
ODROIDs: XU4, C2
Has thanked: 5 times
Been thanked: 1 time
Contact:

CloudShell 2 Replacement Parts

Unread post by noobs4u » Wed Apr 17, 2019 2:32 am

Hello Everyone,

Is there a way to order replacement parts for the plexiglass parts for the CloudShell 2? As plexiglass goes, it isn't terribly flexible and can be quite rigid and unforgiving when cuts aren't perfect. In my case the fan bracket was broken within the first 30min of ownership (while putting it together). The top right corner of the fan bracket that is used to secure everything in place snapped clean off while trying to drop it in place. If single replacement parts can't be purchased, are the cad files available for us to do our own 3D printing or so at least we can inquire locally to have parts re-cut?

Thanks in advance!

User avatar
odroid
Site Admin
Posts: 30260
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 3 times
Been thanked: 24 times
Contact:

Re: CloudShell 2 Replacement Parts

Unread post by odroid » Wed Apr 17, 2019 9:34 am

We don't sell CS2 replacement parts. Sorry about that.
But you could find the drawings(in dxf format) for Acrylic cutting shop. Look at this WiKi page.
https://wiki.odroid.com/accessory/add-o ... 2#hardware
These users thanked the author odroid for the post:
noobs4u (Wed Apr 17, 2019 9:04 pm)

User avatar
noobs4u
Posts: 100
Joined: Fri Apr 01, 2016 1:56 am
languages_spoken: english
ODROIDs: XU4, C2
Has thanked: 5 times
Been thanked: 1 time
Contact:

Re: CloudShell 2 Replacement Parts

Unread post by noobs4u » Wed Apr 17, 2019 9:52 pm

WOW. I must have passed over those files 20+ times in the last 2 weeks. Do you know if the ANYCUBIC Mega-S 3D printer would be sufficient to print off the fan grill? Just a thought.

User avatar
tobetter
Posts: 3003
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: X, X2, U2, U3, XU3, C1
Location: Paju, South Korea
Has thanked: 8 times
Been thanked: 19 times
Contact:

Re: CloudShell 2 Replacement Parts

Unread post by tobetter » Wed Apr 17, 2019 11:06 pm

noobs4u wrote:
Wed Apr 17, 2019 9:52 pm
WOW. I must have passed over those files 20+ times in the last 2 weeks. Do you know if the ANYCUBIC Mega-S 3D printer would be sufficient to print off the fan grill? Just a thought.
Why not? Just make sure the thickness 3mm.
These users thanked the author tobetter for the post:
noobs4u (Wed Apr 17, 2019 11:19 pm)

Post Reply

Return to “CloudShell”

Who is online

Users browsing this forum: No registered users and 0 guests