Odroid C1+ and external USB DAC problems

Post Reply
koozoop
Posts: 8
Joined: Mon Jan 14, 2019 3:05 am
languages_spoken: english
ODROIDs: C1+
Has thanked: 0
Been thanked: 0
Contact:

Odroid C1+ and external USB DAC problems

Unread post by koozoop » Wed Feb 13, 2019 3:03 am

Good evening,

I got myself a C1+ to build a music player with Volumio 2. I want to strictly use it with an external USB DAC.
The one I use now is implemented into Pioneer's A-50DA power amplifier and it is an asynchronous DAC that supports hi-res 32-bit/384kHz (ESS SABRE 32-bit ES9016S). The C1+ hangs (blue led stops flashing) when I choose any webradio station and sometimes when I use the cifs-smb shares. Playback is ok with flacs and mp3's with media servers (asset upnp, minim, plex) but hangs on dsf/dff (both native and DoP). No problems with my other USB DAC (Topping D10 ES9018K2M) so maybe a DAC driver issue or sth else?

How can I get the console output (I'm sort of a newbie with linux) the moment it hangs?

Thank you in advance
Last edited by koozoop on Wed Feb 13, 2019 4:30 am, edited 1 time in total.

User avatar
rooted
Posts: 6509
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 34 times
Been thanked: 13 times
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by rooted » Wed Feb 13, 2019 4:10 am

Sounds a bit like a power issue, do you have a DMM to measure the voltage on the C1+?

To look at the log open a terminal and type:

Code: Select all

dmesg 

koozoop
Posts: 8
Joined: Mon Jan 14, 2019 3:05 am
languages_spoken: english
ODROIDs: C1+
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by koozoop » Wed Feb 13, 2019 4:35 am

Thank you for the response.
It is powered through a hardkernel 5V/2A power supply. I will check with my DMM. I updated my post because it also hangs with dsf/dff files.

I will dmesg and see what happens.

koozoop
Posts: 8
Joined: Mon Jan 14, 2019 3:05 am
languages_spoken: english
ODROIDs: C1+
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by koozoop » Wed Feb 13, 2019 4:41 am

UPDATE: I ran the Volumio 2 x86 version on my Linx Vision tablet (Windows tablet, image on usb, runs on battery due to single usb port) and everything works flawlessly! So definitely an Odroid c1+ issue.

koozoop
Posts: 8
Joined: Mon Jan 14, 2019 3:05 am
languages_spoken: english
ODROIDs: C1+
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by koozoop » Wed Feb 13, 2019 5:56 am

this is the dmesg output:

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x200
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.104 (odroidc1@VolumioOS) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #10 SMP PREEMPT Tue Apr 10 10:12:57 CEST 2018
[    0.000000] Kernel was built at commit id '6ac660c'
[    0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ODROIDC, model: AMLOGIC
[    0.000000] physical memory start address is 0x200000
[    0.000000] reserved_end is e3fffff 
 
[    0.000000] Total memory is 1022 MiB
[    0.000000] Reserved low memory from 0x06000000 to 0x0e3fffff, size: 132 MiB 
[    0.000000] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
[    0.000000] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
[    0.000000] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
[    0.000000] 	vdec0(low)   	: 0x09a00000 - 0x0da00000 ( 64 MiB)
[    0.000000] 	ppmgr0(high)   	: 0x3f000000 - 0x40000000 ( 16 MiB)
[    0.000000] 	deinterlace0(high)   	: 0x3cf00000 - 0x3f000000 ( 33 MiB)
[    0.000000] 	amvideocap0(low)   	: 0x0da00000 - 0x0e400000 ( 10 MiB)
[    0.000000] cma: CMA: reserved 8 MiB at 3c400000
[    0.000000] cma: Found region@0, memory base 0, size 42 MiB
[    0.000000] cma: CMA: reserved 44 MiB at 2cc00000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 211712
[    0.000000] free_area_init_node: node 0, pgdat c09bf480, node_mem_map c0c59000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 157184 pages, LIFO batch:31
[    0.000000]   HighMem zone: 426 pages used for memmap
[    0.000000]   HighMem zone: 54528 pages, LIFO batch:15
[    0.000000] Meson chip version = RevA (1B:A - 0:B72)
[    0.000000] PERCPU: Embedded 8 pages/cpu @c1402000 s8256 r8192 d16320 u32768
[    0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 210192
[    0.000000] Kernel command line: console=ttyS0,115200n8 console=tty0 rootwait rw no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=1080p m_bpp=32 vout=hdmi disableuhs enabledac imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh
[    0.000000] cvbs trimming line = 0xa000
[    0.000000] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000] osd1:1
[    0.000000] loaded:268435459
[    0.000000] logo has been loaded
[    0.000000] 720p:11
[    0.000000] full:2
[    0.000000] kernel get cvbsmode form uboot is 576cvbs
[    0.000000] kernel get hdmimode form uboot is 1080p
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 1992704 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 64MB 16MB 747MB = 827MB total
[    0.000000] Memory: 765864k/765864k available, 80984k reserved, 209920K highmem
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e098   (9241 kB)
      .init : 0xc090f000 - 0xc0947040   ( 225 kB)
      .data : 0xc0948000 - 0xc09c03c0   ( 481 kB)
       .bss : 0xc09c03c0 - 0xc0c5407c   (2640 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Global timer: MESON TIMER-F (c0963400) initialized
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] meson_serial_console_setup
[    0.000000] console [ttyS0] enabled
[    0.370867] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.381155] pid_max: default: 32768 minimum: 301
[    0.386069] Security Framework initialized
[    0.390201] AppArmor: AppArmor initialized
[    0.394434] Mount-cache hash table entries: 512
[    0.403657] Initializing cgroup subsys memory
[    0.403768] Initializing cgroup subsys devices
[    0.408134] Initializing cgroup subsys freezer
[    0.412783] Initializing cgroup subsys blkio
[    0.417137] Initializing cgroup subsys perf_event
[    0.422160] CPU: Testing write buffer coherency: ok
[    0.427448] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.432947] Setting up static identity map for 0xc06740f0 - 0xc0674148
[    0.439582] L310 cache controller enabled
[    0.443678] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9,  Cache size: 524288 B
[    0.451088]       AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL  0x00000000
[    0.459214]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.540319] CPU1: Booted secondary processor
[    0.540338] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.560319] CPU2: Booted secondary processor
[    0.560337] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.580313] CPU3: Booted secondary processor
[    0.580331] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.580423] Brought up 4 CPUs
[    0.608614] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.614841] CPU: All CPU(s) started in SVC mode.
[    0.620314] devtmpfs: initialized
[    0.629700] clkrate [ xtal 	] : 24000000
[    0.629745] clkrate [ pll_sys 	] : 1200000000
[    0.632702] clkrate [ pll_fixed 	] : 2550000000
[    0.637355] clkrate [ pll_vid 	] : 732000000
[    0.641782] clkrate [ pll_ddr 	] : 0
[    0.645494] clkrate [ a9_clk 	] : 1200000000
[    0.649910] clkrate [ clk81 	] : 159375000
[    0.654535] pinctrl core: initialized pinctrl subsystem
[    0.659725] regulator-dummy: no parameters
[    0.665753] NET: Registered protocol family 16
[    0.672578] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.676540] VPU driver version: v02
[    0.679091] load vpu_clk in dts: 182150000Hz(3)
[    0.683818] vpu_probe OK
[    0.686667] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
[    0.695364] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.699478] register lm device lm-root
[    0.703046] register lm device lm1
[    0.706568] register lm device lm0
[    0.710164] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.718227] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.724313] Init pinux probe!
[    0.728010] pinmux-m8b pinmux: Probed amlogic pinctrl driver
[    0.733169] tv_init_module
[    0.735984] major number 254 for disp
[    0.739787] vout_register_server
[    0.743178] register tv module server ok
[    0.747299] call aml_dvfs_init in
[    0.750760] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
[    0.750772] [DVFS]dvfs table of vcck_dvfs is:
[    0.750780] [DVFS]     freq,    min_uV,    max_uV
[    0.750787] [DVFS]    96000,    825000,    825000
[    0.750794] [DVFS]   192000,    825000,    825000
[    0.750801] [DVFS]   312000,    825000,    825000
[    0.750808] [DVFS]   408000,    825000,    825000
[    0.750814] [DVFS]   504000,    825000,    825000
[    0.750821] [DVFS]   600000,    825000,    825000
[    0.750828] [DVFS]   720000,    825000,    825000
[    0.750835] [DVFS]   816000,    850000,    850000
[    0.750841] [DVFS]  1008000,    875000,    875000
[    0.750848] [DVFS]  1200000,    925000,    925000
[    0.750855] [DVFS]  1320000,   1100000,   1100000
[    0.750862] [DVFS]  1488000,   1100000,   1100000
[    0.750869] [DVFS]  1536000,   1140000,   1140000
[    0.750876] [DVFS]  1632000,   1140000,   1140000
[    0.750883] [DVFS]  1728000,   1140000,   1140000
[    0.750889] [DVFS]  1824000,   1140000,   1140000
[    0.750962] hdmitx: system: amhdmitx_init
[    0.754853] hdmitx: system: Ver: 2014May6
[    0.759065] hdmitx: system: amhdmitx_probe
[    0.763550] hdmitx: system: gate/pwr cmd: 7
[    0.767583] hdmitx: system: ALREADY init VIC = 4
[    0.772361] hdmitx: system: gate/pwr cmd: 0
[    0.777097] hdmitx: system: reset intr mask
[    0.808128] bio: create slab <bio-0> at 0
[    0.808826] SCSI subsystem initialized
[    0.810799] usbcore: registered new interface driver usbfs
[    0.816256] usbcore: registered new interface driver hub
[    0.821787] usbcore: registered new device driver usb
[    0.826939] media: Linux media interface: v0.10
[    0.831596] Linux video capture interface: v2.00
[    0.836737] request vpu clk holdings: venci 106250000Hz
[    0.841701] TV mode 576cvbs selected.
[    0.845487] tvoutc_setmode[459]
[    0.848773] mode is: 8
[    0.851298] VPU_VIU_VENC_MUX_CTRL: 0x5
[    0.855180] viu chan = 1
[    0.857864] VPU_VIU_VENC_MUX_CTRL: 0x5
[    0.861771] config HPLL
[    0.880030] config HPLL done
[    1.890043] vdac open.1 = 0x1, 0x0
[    1.890081] aml_logo: outputmode changed(11->8), reset osd1 scaler.
[    1.973277] get property:                  use_pwm, value:0x00000001, dec:       1
[    1.975401] get property:              table_count, value:0x0000001d, dec:      29
[    1.983134] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
[    1.990311]  0, 010f001b,  860000
[    1.993753]  1, 01050025,  870000
[    1.997217]  2, 00fc002e,  880000
[    2.000692]  3, 00f30037,  890000
[    2.004144]  4, 00ea0040,  900000
[    2.007607]  5, 00e10049,  910000
[    2.011088]  6, 00d60054,  920000
[    2.014534]  7, 00cb005f,  930000
[    2.017998]  8, 00c0006a,  940000
[    2.021473]  9, 00b50075,  950000
[    2.024925] 10, 00aa0080,  960000
[    2.028389] 11, 00a0008a,  970000
[    2.031869] 12, 00960094,  980000
[    2.035316] 13, 008d009d,  990000
[    2.038779] 14, 007b00af, 1000000
[    2.042254] 15, 007200b8, 1010000
[    2.045706] 16, 006900c1, 1020000
[    2.049170] 17, 006000ca, 1030000
[    2.052650] 18, 005700d3, 1040000
[    2.056097] 19, 004e00dc, 1050000
[    2.059560] 20, 004500e5, 1060000
[    2.063035] 21, 003c00ee, 1070000
[    2.066488] 22, 003300f7, 1080000
[    2.069951] 23, 002a0100, 1090000
[    2.073432] 24, 00180109, 1100000
[    2.076878] 25, 000f011b, 1110000
[    2.080353] 26, 000a0120, 1120000
[    2.083805] 27, 00050125, 1130000
[    2.087269] 28, 0000012a, 1140000
[    2.090792] get pin for pwm--------
[    2.094372] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
[    2.094605] Advanced Linux Sound Architecture Driver Initialized.
[    2.101041] Bluetooth: Core ver 2.16
[    2.104363] NET: Registered protocol family 31
[    2.108915] Bluetooth: HCI device and connection manager initialized
[    2.115446] Bluetooth: HCI socket layer initialized
[    2.120451] Bluetooth: L2CAP socket layer initialized
[    2.125647] Bluetooth: SCO socket layer initialized
[    2.130821] Loading modules backported from Linux version next-20150129-0-g828f79f
[    2.138355] Backport integrated by backports.git backports-20150129-0-gdd4a670
[    2.145947] cfg80211: Calling CRDA to update world regulatory domain
[    2.152897] Switching to clocksource Timer-E
[    2.156935] AppArmor: AppArmor Filesystem Enabled
[    2.169028] NET: Registered protocol family 2
[    2.169760] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    2.175249] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    2.181838] TCP: Hash tables configured (established 8192 bind 8192)
[    2.188272] TCP: reno registered
[    2.191593] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    2.197682] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    2.204369] NET: Registered protocol family 1
[    2.208853] Unpacking initramfs...
[    2.453191] Freeing initrd memory: 4232K (c4e08000 - c522a000)
[    2.454241] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
[    2.462371] audit: initializing netlink socket (disabled)
[    2.467404] type=2000 audit(2.390:1): initialized
[    2.472924] bounce pool size: 64 pages
[    2.481357] VFS: Disk quotas dquot_6.5.2
[    2.481621] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.488223] msgmni has been set to 1182
[    2.492246] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.498641] io scheduler noop registered
[    2.502415] io scheduler deadline registered
[    2.506996] io scheduler cfq registered (default)
[    2.555751] [drm] Initialized drm 1.1.0 20060810
[    2.555930] gpu cooling register okay with err=0
[    2.562613] Mali: Mali device driver loaded
[    2.564161] UMP: UMP device driver -jenkins-deb_kernel_c1-177 loaded
[    2.573360] loop: module loaded
[    2.574307] tun: Universal TUN/TAP device driver, 1.6
[    2.579019] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.585466] PPP generic driver version 2.4.2
[    2.590116] usbcore: registered new interface driver usb-storage
[    2.595990] usbcore: registered new interface driver usbserial
[    2.601914] usbcore: registered new interface driver usbserial_generic
[    2.608568] usbserial: USB Serial support registered for generic
[    2.614927] mousedev: PS/2 mouse device common for all mice
[    2.620654] i2c /dev entries driver
[    2.624369] device-mapper: uevent: version 1.0.3
[    2.629089] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    2.637524] Bluetooth: HCI UART driver ver 2.2
[    2.641946] Bluetooth: HCI H4 protocol initialized
[    2.646897] Bluetooth: HCI BCSP protocol initialized
[    2.651997] Bluetooth: HCILL protocol initialized
[    2.656854] Bluetooth: HCIATH3K protocol initialized
[    2.661947] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[    2.668993] ledtrig-cpu: registered to indicate activity on CPUs
[    2.674655] hidraw: raw HID events driver (C) Jiri Kosina
[    2.680387] usbcore: registered new interface driver usbhid
[    2.685844] usbhid: USB HID core driver
[    2.690084] efuse===========================================
[    2.695761] efuse: device efuse created
[    2.699679] efuse--------------------------------------------
[    2.705500] vout_init_module
[    2.708588] start init vout module 
[    2.712305] create  vout attribute ok 
[    2.716305] ge2d_init
[    2.718693] ge2d_dev major:244
[    2.722103] ge2d start monitor
[    2.725340] osd_init
[    2.725352] ge2d workqueue monitor start
[    2.731808] osd_probe, vinfo:c06b3498
[    2.735849] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
[    2.743716] osd_probe, mydef_var:c0995ff8, vinfo:c06b3498
[    2.749255] init fbdev bpp is :32
[    2.752786] ---------------clear framebuffer0 memory  
[    2.783372] Console: switching to colour frame buffer device 160x90
[    2.796632] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
[    2.804586] osd_probe, mydef_var:c0995ff8, vinfo:c06b3498
[    2.810127] don't find to display_size_default from mesonfb-dts
[    2.816167] init fbdev bpp is :24
[    2.830131] osd probe ok  
[    2.830199] hdmitx: video: get current mode: 576cvbs
[    2.832622] hdmitx: edid: not find mapped vic
[    2.837139] hdmitx: hpd: HPD deassert!
[    2.890608] amlvideo-000: V4L2 device registered as video10
[    2.891025] ionvideo-000: V4L2 device registered as video13
[    2.896505] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
[    2.904930] DI: di_init
[    2.904975] DI: di_probe
[    2.905344] aml_wdt_driver_init,306
[    2.908603] ** disable watchdog
[    2.911943] one-secod=7812,min_timeout=1,max_timeout=8,default_timeout=10,reset_watchdog_method=0,reset_watchdog_time=2,shutdown_timeout=10,firmware_timeout=6,suspend_timeout=6
[    2.927941] AML Watchdog Timer probed done 
[    2.932313] set uart_ao pinmux use pinctrl subsystem
[    2.937171] P_AO_RTI_PIN_MUX_REG:1801
[    2.940943] start uart_ao_ttyS0:(irq = 122)
[    2.945254] register uart_ao ok
[    2.948811] set uart_b pinmux use pinctrl subsystem
[    2.953576] P_AO_RTI_PIN_MUX_REG:1801
[    2.957452] start uart_b_ttyS2:(irq = 107)
[    2.961619] register uart_b ok
[    2.964900] dwc_otg: version 3.10a 12-MAY-2014
[    2.969485] dwc_otg_driver_probe NOT match
[    3.013694] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    3.016818] USB (1) use clock source: XTAL input
[    3.042669] Core Release: 3.10a
[    3.042749] Setting default values for core params
[    3.045339] curmode: 1, host_only: 1
[    3.069251] Using Buffer DMA mode
[    3.069326] OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.071663] Working on port type = HOST
[    3.075833] dwc_otg lm1: DWC OTG Controller
[    3.080036] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    3.086728] dwc_otg lm1: irq 63, io mem 0x00000000
[    3.091581] -------hcd->flags.d32 = 0
[    3.095397] Init: Port Power? op_state=1
[    3.099496] Init1: Power Port (0)
[    3.103412] hub 1-0:1.0: USB hub found
[    3.106883] hub 1-0:1.0: 1 port detected
[    3.111071] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    3.119516] USB (0) use clock source: XTAL input
[    3.145291] Core Release: 3.10a
[    3.145365] Setting default values for core params
[    3.148010] curmode: 1, host_only: 0
[    3.211827] Using Buffer DMA mode
[    3.211902] OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.214232] Working on port type = OTG
[    3.218183] Current port type: SLAVE
[    3.222242] dwc_otg lm0: DWC OTG Controller
[    3.226228] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    3.232937] dwc_otg lm0: irq 62, io mem 0x00000000
[    3.238287] hub 2-0:1.0: USB hub found
[    3.242201] hub 2-0:1.0: 1 port detected
[    3.246221] Dedicated Tx FIFOs mode
[    3.250484] using timer detect id change, ec99e400
[    3.254516] ethernet_driver probe!
[    3.258406] ethernetinit(dbg[c099ac28]=1)
[    3.262244] ethernet base addr is fe0c0000
[    3.266328] write mac add to:ebe4fa88: 00 1e 06 11 7e 84 |..~.|
[    3.279706] libphy: AMLMAC MII Bus: probed
[    3.283516] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
[    3.287907] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
[    3.293753] amvideocap_init_module
[    3.297687] amvideocap_probe,amvideocap
[    3.301481] amvideocap_dev_register buf:0da00000,size:a00000.
[    3.307070] Indeed it is in host mode hprt0 = 00021501
[    3.307246] Amlogic A/V streaming port init
[    3.308420] init vdec memsource 9a00000->d9fffff
[    3.308512] [tsync_pcr_init]init success. 
[    3.308556] regist mpeg12 codec profile
[    3.308604] regist mpeg4 codec profile
[    3.308606] amvdec_vc1 module init
[    3.308649] regist vc1 codec profile
[    3.308651] amvdec_h264 module init
[    3.308723] regist h264 codec profile
[    3.308725] amvdec_h265 module init
[    3.308767] regist hevc codec profile
[    3.308810] regist mjpeg codec profile
[    3.308812] amvdec_real module init
[    3.308853] regist real codec profile
[    3.308855] amvdec_avs module init
[    3.308965] amvenc_avc memory resource undefined.
[    3.308967] encode_wq_init.
[    3.308971] encode start monitor.
[    3.309079] encode workqueue monitor start.
[    3.309287] regist avc codec profile
[    3.309290] jpegenc module init
[    3.309506] alloc_keep_buffer keep_y_addr eba00000
[    3.309576] alloc_keep_buffer keep_u_addr ec000000
[    3.309606] alloc_keep_buffer keep_v_addr ebf80000
[    3.309625] yaddr=eba00000,u_addr=ec000000,v_addr=ebf80000
[    3.309959] create_ge2d_work_queue video task ok 
[    3.310229] SARADC Driver init.
[    3.310349] __saradc_probe__
[    3.456815] saradc calibration: ref_val = 505
[    3.459974] saradc calibration: ref_nominal = 512
[    3.463680] saradc calibration: coef = 4048
[    3.468286] ir irblaster probe
[    3.471552] Remote Driver
[    3.474728] ==touch_ts_init==
[    3.477905] ==ft5x0x_ts_init==
[    3.480994] ==goodix_ts_init==
[    3.484069] i2c-core: driver [gslx680_compatible] using legacy suspend method
[    3.490813] i2c-core: driver [gslx680_compatible] using legacy resume method
[    3.498016] !!!ntp_ts: ret = 0. 
[    3.501346] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
[    3.507798] i2c-core: driver [ct36x] using legacy suspend method
[    3.513902] i2c-core: driver [ct36x] using legacy resume method
[    3.519993] VTL ct36x TouchScreen driver End.
[    3.524465] ==gsl_ts_init==
[    3.527513] ret=0
[    3.530673] i2c-core: driver [mir3da] using legacy suspend method
[    3.535722] i2c-core: driver [mir3da] using legacy resume method
[    3.541919] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    3.548466] i2c-core: driver [lis3dh_acc] using legacy resume method
[    3.555001] i2c-core: driver [bma222] using legacy suspend method
[    3.561196] i2c-core: driver [bma222] using legacy resume method
[    3.567389] i2c-core: driver [dmard06] using legacy suspend method
[    3.573648] i2c-core: driver [dmard06] using legacy resume method
[    3.579925] lsm303d driver: init
[    3.583304] i2c-core: driver [dmard10] using legacy suspend method
[    3.589596] i2c-core: driver [dmard10] using legacy resume method
[    3.595841] stk8313_init
[    3.596698] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    3.605140] ======stk831x init ok======
[    3.609110] stk831x_init
[    3.609115] Indeed it is in host mode hprt0 = 00001101
[    3.617081] mxc622x accelerometer driver: init
[    3.621642] i2c-core: driver [mxc622x] using legacy suspend method
[    3.627956] i2c-core: driver [mxc622x] using legacy resume method
[    3.634174] mxc6255xc accelerometer driver: init
[    3.638987] i2c-core: driver [mxc6255xc] using legacy suspend method
[    3.645429] i2c-core: driver [mxc6255xc] using legacy resume method
[    3.651923] cm3217 v.1.0.0.1
[    3.654980] i2c-core: driver [elan_epl6814] using legacy suspend method
[    3.661639] i2c-core: driver [elan_epl6814] using legacy resume method
[    3.668331] i2c-core: driver [LTR501] using legacy suspend method
[    3.674532] i2c-core: driver [LTR501] using legacy resume method
[    3.680807] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
[    3.688810] host->base fe108e00
[    3.691974] pdata->caps 107
[    3.695031] pdata->caps2 0
[    3.698071] get property:                     port, value:0x00000004
[    3.703445] get property:                ocr_avail, value:0x00200080
[    3.709955] get property:                    f_min, value:0x000493e0
[    3.716433] get property:                    f_max, value:0x05f5e100
[    3.722944] get property:             max_req_size, value:0x00020000
[    3.729444] get property:                   irq_in, value:0x00000003
[    3.735917] get property:                  irq_out, value:0x00000005
[    3.742432] get property:                  gpio_cd, str:CARD_6
[    3.748401] get property:                  pinname, str:sd
[    3.754013] get property:                card_type, value:0x00000005
[    3.760524] get property:                gpio_dat3, str:CARD_4
[    3.766483] get property:               gpio_volsw, str:GPIOAO_3
[    3.772785] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
[    3.808681] hub 1-1:1.0: USB hub found
[    3.812009] hub 1-1:1.0: 4 ports detected
[    3.836711] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    3.879607] sd: new high speed SDHC card at address aaaa, clock 38636363, 4-bit-bus-width
[    3.885797] mmcblk0: sd:aaaa SC16G 14.8 GiB 
[    3.893972]  mmcblk0: p1 p2 p3
[    3.896684] [aml_sdhc_probe] aml_sdhc_probe() success!
[    3.900699] host->base fe108c20
[    3.903933] pdata->caps 80000507
[    3.907124] pdata->caps2 1
[    3.910262] get property:                     port, value:0x00000002
[    3.915990] get property:                ocr_avail, value:0x00200000
[    3.922568] get property:                    f_min, value:0x000493e0
[    3.929074] get property:                    f_max, value:0x02faf080
[    3.935542] get property:                  f_max_w, value:0x02faf080
[    3.942050] get property:             max_req_size, value:0x00020000
[    3.948551] get property:                  pinname, str:emmc
[    3.954297] get property:                card_type, value:0x00000001
[    3.960777] get property:                gpio_dat3, str:BOOT_3
[    3.966749] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
[    4.006713] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
[    4.011051] aml_emmc_hw_reset 1379
[    4.066695] [aml_sdio_probe] aml_sdio_probe() success!
[    4.070084] [dsp]DSP start addr 0xc5e00000
[    4.073920] [dsp]register dsp to char divece(257)
[    4.079736] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
[    4.086230] amlogic rfkill init
[    4.089656] Bluetooth: btwake_control_init Driver Ver 1.1
[    4.094367] aml_hw_crypto initialization.
[    4.099245] enter aml_i2s_dai_probe
[    4.099257] i2s get no clk src setting in dts, use the default mpll 0
[    4.104460] enter aml_pcm_dai_probe
[    4.104698] enter spdif_dit_probe 
[    4.108030] aml_spdif_unmute 
[    4.112293] aml-i2s 0:playback preallocate_dma_buffer: area=f04fc000, addr=3c840000, size=65536
[    4.120160] aml-i2s 1:capture preallocate_dma_buffer: area=f050e000, addr=3c860000, size=65536
[    4.128644] aml_snd_m8 aml_m8_sound_card.4:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    4.136720] usb 1-1.4: new high-speed USB device number 3 using dwc_otg
[    4.143508] GACT probability NOT on
[    4.147069] Mirror/redirect action on
[    4.151336] NET: Registered protocol family 10
[    4.155984] mip6: Mobile IPv6
[    4.159504] sit: IPv6 over IPv4 tunneling driver
[    4.164085] NET: Registered protocol family 17
[    4.167775] NET: Registered protocol family 15
[    4.172394] Bridge firewalling registered
[    4.176600] Bluetooth: RFCOMM TTY layer initialized
[    4.181524] Bluetooth: RFCOMM socket layer initialized
[    4.186774] Bluetooth: RFCOMM ver 1.11
[    4.190653] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.196106] Bluetooth: BNEP filters: protocol multicast
[    4.201501] Bluetooth: BNEP socket layer initialized
[    4.206584] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.212668] Bluetooth: HIDP socket layer initialized
[    4.217799] NET: Registered protocol family 35
[    4.222930] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[    4.230194] Registering SWP/SWPB emulation handler
[    4.235276] pm-meson: probe of aml_pm_m8 failed with error -1
[    4.241469] registered taskstats version 1
[    4.245269] regulator-dummy: disabling
[    4.249371] Mali DRM initialize, driver name: mali_drm, version 2.1
[    4.255860] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
[    4.261741] Mali DRM initialize, driver name: mali_drm, version 2.1
[    4.268313] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
[    4.274868] aml_rtc rtc.1: setting system clock to 1970-01-01 00:00:00 UTC (0)
[    4.281629] ### dt-test ### No testcase data in device tree; not running tests
[    4.289102] meson_cpufreq_probe:SYSPLL request to be fixed
[    4.294588] meson_cpufreq: no voltage_control prop
[    4.299529] voltage_control = 0
[    4.304034] <<-GTP-INFO->> GTP driver installing...
[    4.308109] buf[0]=ef,buf[1]=af,err=4
[    4.311627] adc=383,TS_C=15,flag=1
[    4.315177] efuse_flag=a
[    4.318055] amlogic_thermal_probe, this chip is trimmed, use thermal
[    4.324360] amlogic-thermal aml_thermal: amlogic thermal probe start
[    4.330879] #thermal-cells=7
[    4.333887] pdata->temp_trip_count=4
[    4.337623] temperature=70 on trip point=0
[    4.341997] input: Onkyo & Pioneer Corporation PIONEER A-70DA A-50DA USB AUDIO as /devices/lm1/usb1/1-1/1-1.4/1-1.4:1.2/input/input0
[    4.342224] hid-generic 0003:08E4:01BD.0001: input,hidraw0: USB HID v1.00 Device [Onkyo & Pioneer Corporation PIONEER A-70DA A-50DA USB AUDIO] on usb-lm1-1.4/input2
[    4.341854] fixing high_freq=1488001 to 1488000 at trip point 0,level=4
[    4.377166] fixing low_freq=1488001 to 1488000 at trip point 0,level=4
[    4.383806] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
[    4.389837] cpu[0] core num==3
[    4.393058] gpu[0] core num==2
[    4.396258] temperature=80 on trip point=1
[    4.400493] fixing high_freq=1200001 to 1200000 at trip point 1,level=7
[    4.407579] fixing low_freq=1200001 to 1200000 at trip point 1,level=7
[    4.414256] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
[    4.420317] cpu[1] core num==2
[    4.423582] gpu[1] core num==2
[    4.426849] temperature=90 on trip point=2
[    4.430956] fixing high_freq=800001 to 696000 at trip point 2,level=12
[    4.438069] fixing low_freq=800001 to 696000 at trip point 2,level=12
[    4.444669] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
[    4.450625] cpu[2] core num==1
[    4.453996] gpu[2] core num==1
[    4.457359] temperature=110 on trip point=3
[    4.461348] fixing high_freq=-1 to -22 at trip point 3,level=-1
[    4.468165] fixing low_freq=-1 to -22 at trip point 3,level=-1
[    4.474121] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
[    4.479633] cpu[3] core num==-1
[    4.482974] gpu[3] core num==-1
[    4.486288] idle interval=1000
[    4.489601] pdata->name:aml_thermal
[    4.493270] tmp_trip[0].cpu_core_upper=1
[    4.497142] tmp_trip[1].cpu_core_upper=2
[    4.501188] tmp_trip[2].cpu_core_upper=3
[    4.505266] tmp_trip[3].cpu_core_upper=-1
[    4.509428] aml_thermal bind thermal-cpucore-0 okay !
[    4.514638] aml_thermal bind thermal-cpufreq-0 okay !
[    4.519811] pdata->tmp_trip[0].gpu_lower_level=1
[    4.524558] pdata->tmp_trip[0].gpu_upper_level=1
[    4.529343] pdata->tmp_trip[1].gpu_lower_level=2
[    4.534083] pdata->tmp_trip[1].gpu_upper_level=2
[    4.538868] pdata->tmp_trip[2].gpu_lower_level=4
[    4.543608] pdata->tmp_trip[2].gpu_upper_level=4
[    4.548396] pdata->tmp_trip[3].gpu_lower_level=-1
[    4.553219] pdata->tmp_trip[3].gpu_upper_level=-1
[    4.558090] aml_thermal bind thermal-gpufreq-0 okay !
[    4.563409] amlogic: Kernel Thermal management registered
[    4.568820] amlogic-thermal aml_thermal: amlogic thermal probe done
[    4.575274] hdmitx: cec: CEC init
[    4.578789] hdmitx: cec: CEC task process
[    4.578929] input: cec_input as /devices/virtual/input/input1
[    4.579091] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    4.579091] ALSA device list:
[    4.579094]   #0: ODROID-HDMI
[    4.600880] Freeing unused kernel memory: 224K (c090f000 - c0947000)
[    4.873632] initramfs: Booting Volumio for ODROIDC
[    4.876888] initramfs: This script mounts rootfs RO with an overlay RW layer.
[    4.897759] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.906828] initramfs: IMGPART=/dev/mmcblk0p2
[    4.909991] initramfs: IMGFILE=/volumio_current.sqsh
[    4.964788] initramfs: /dev/mmcblk0p2:
[    4.972785] force enable DISCARD here for ext4 fs
[    5.011370] EXT4-fs (mmcblk0p2): recovery complete
[    5.015401] checked enable EXT4 DISCARD here
[    5.018556] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
[    5.027740] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.040355] initramfs: Checking for USB updates
[    5.247766] initramfs: No USB device detected (when incorrect, try adding 'bootdelay=5' to your boot cmdline)
[    5.336145] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.364369] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.382804] force enable DISCARD here for ext4 fs
[    5.589839] EXT4-fs (mmcblk0p3): ext4_orphan_cleanup: deleting unreferenced inode 360645
[    5.590045] EXT4-fs (mmcblk0p3): 1 orphan inode deleted
[    5.593161] EXT4-fs (mmcblk0p3): recovery complete
[    5.617846] checked enable EXT4 DISCARD here
[    5.620911] EXT4-fs (mmcblk0p3): mounting with "discard" option, but the device does not support discard
[    5.629351] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    5.641656] initramfs: Without Option:
[    5.683642] initramfs: VOLUMIO_VERSION="2.513"
[    5.686974] initramfs: Finish initramfs, continue booting Volumio
[    5.999587] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.010960] systemd[1]: Detected architecture 'arm'.
[    6.118745] systemd[1]: Inserted module 'autofs4'
[    6.127127] systemd[1]: Set hostname to <volumio-odroid>.
[    6.368445] systemd[1]: [/lib/systemd/system/mpd.service:18] Unknown lvalue 'ProtectKernelTunables' in section 'Service'
[    6.376969] systemd[1]: [/lib/systemd/system/mpd.service:19] Unknown lvalue 'ProtectControlGroups' in section 'Service'
[    6.387918] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ProtectKernelModules' in section 'Service'
[    6.398860] systemd[1]: [/lib/systemd/system/mpd.service:23] Unknown lvalue 'RestrictNamespaces' in section 'Service'
[    6.455784] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.473822] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.479543] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.486993] systemd[1]: Expecting device dev-ttyS0.device...
[    6.496258] systemd[1]: Starting Remote File Systems (Pre).
[    6.503170] systemd[1]: Reached target Remote File Systems (Pre).
[    6.507173] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.519837] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.527194] systemd[1]: Starting Encrypted Volumes.
[    6.535747] systemd[1]: Reached target Encrypted Volumes.
[    6.539196] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    6.548807] systemd[1]: Starting Root Slice.
[    6.555946] systemd[1]: Created slice Root Slice.
[    6.559447] systemd[1]: Starting User and Session Slice.
[    6.568180] systemd[1]: Created slice User and Session Slice.
[    6.572000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.582722] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.587893] systemd[1]: Starting Delayed Shutdown Socket.
[    6.597378] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.601371] systemd[1]: Starting Journal Socket (/dev/log).
[    6.611209] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.615501] systemd[1]: Starting udev Control Socket.
[    6.624859] systemd[1]: Listening on udev Control Socket.
[    6.628810] systemd[1]: Starting udev Kernel Socket.
[    6.637926] systemd[1]: Listening on udev Kernel Socket.
[    6.641862] systemd[1]: Starting Journal Socket.
[    6.650615] systemd[1]: Listening on Journal Socket.
[    6.654617] systemd[1]: Starting System Slice.
[    6.663101] systemd[1]: Created slice System Slice.
[    6.667095] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    6.676951] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.681653] systemd[1]: Starting dynamicswap service...
[    6.697488] systemd[1]: Started dynamicswap service.
[    6.706256] systemd[1]: Starting Swap.
[    6.714414] systemd[1]: Reached target Swap.
[    6.718619] systemd[1]: Starting system-getty.slice.
[    6.727100] systemd[1]: Created slice system-getty.slice.
[    6.730952] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.741442] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.746076] systemd[1]: Starting Restore / save the current clock...
[    6.762330] systemd[1]: Mounted Huge Pages File System.
[    6.766372] systemd[1]: Mounting POSIX Message Queue File System...
[    6.787253] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.802027] systemd[1]: Mounting Debug File System...
[    6.833633] systemd[1]: Started Set Up Additional Binary Formats.
[    6.863332] systemd[1]: Starting Load Kernel Modules...
[    6.873735] systemd[1]: Starting udev Coldplug all Devices...
[    6.884168] systemd[1]: Starting Journal Service...
[    6.898939] systemd[1]: Started Journal Service.
[    7.003746] fuse init (API version 7.22)
[    7.021260] pcm5102_platform_probe
[    7.041001] card->pinctrl_name:odroid_i2s
[    7.047397] aml-i2s 0:playback preallocate_dma_buffer: area=f05ea000, addr=3c900000, size=65536
[    7.055162] odroid_snd odroid_sound_card.5:  pcm5102 <-> aml-i2s-dai.0 mapping ok
[    7.177356] systemd-udevd[204]: starting version 215
[    7.663468] Driver for 1-wire Dallas network protocol.
[    8.017725] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
[    8.056908] aml_emmc_hw_reset 1379
[    8.218530] usbcore: registered new interface driver snd-usb-audio
[    8.255691] ionvideo open
[    8.259742] ionvideo_stop_generating!!!!
[    8.262948] ionvideo release
[    9.043914] systemd-journald[192]: Received request to flush runtime journal from PID 1
[    9.668837] netdev_open
[    9.672649] Ethernet reset
[    9.675779] NET MDA descpter start addr=eac00000
[    9.733481] phy_interface = 0
[    9.736587] aml_phy_init:  trying to attach to 0:01
[    9.740473] am_rtl811f called phy reset
[    8.267215] amlvideo openamlvideo close
[    9.756815] --1--write mac add to:
[    9.759898] ebe4fa88: 00 1e 06 11 7e 84 |..~.|
[    9.763144] --2--write mac add to:ebe4fa88: 00 1e 06 11 7e 84 |..~.|
[    9.770452] write mac add to:ebe4fa88: 00 1e 06 11 7e 84 |..~.|
[    9.776062] Current DMA mode=0, set mode=621c100
[    9.779771] eth0: opened (irq 40).
[    9.789949] ether leave promiscuous mode
[    9.792979] ether leave all muticast mode
[    9.796016] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.495336] RPC: Registered named UNIX socket transport module.
[   10.499291] RPC: Registered udp transport module.
[   10.503673] RPC: Registered tcp transport module.
[   10.508560] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.532870] Key type dns_resolver registered
[   10.956381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.605270] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.628319] aml_i2c version: 20140813
[   11.628405] plat->state_name:default
[   11.628421] master_no = 1, master_regs=fe108500
[   11.628713] aml-i2c i2c-A: add adapter aml_i2c_adap1(eb62b8a8)
[   11.628718] aml-i2c i2c-A: aml i2c bus driver.
[   11.628817] plat->state_name:default
[   11.628831] master_no = 2, master_regs=fe1087c0
[   11.629092] aml-i2c i2c-B: add adapter aml_i2c_adap2(eb62b4a8)
[   11.727578] sx865x 2-0049: sx865x_probe()
[   11.729629]  reg:2620,clearmask=10001,setmask=10001
[   11.729633] reg:2621,clearmask=ff,set pin=98
[   11.729635] reg:2623,clearmask=7,setmask=7
[   11.729642] sx865x 2-0049: swap_xy (1)
[   11.729645] sx865x 2-0049: invert_x (0)
[   11.729649] sx865x 2-0049: invert_y (1)
[   11.729652] sx865x 2-0049: gpio pendown (98)
[   11.729656] sx865x 2-0049: gpio reset (99)
[   11.729661] sx865x 2-0049: gpio irq (96)
[   11.771090] tvmode set to 1080p

[   11.778984] request vpu clk holdings: vencp 159375000Hz
[   11.780807] TV mode 1080p selected.
[   11.784500] tvoutc_setmode[459]
[   11.788494] new mode 1080p
 set ok
[   11.792974] hdmitx: video: get current mode: 1080p
[   11.798435] hdmitx: hpd: HPD deassert!
[   11.826795] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO) token 2, master_no(2) 100K addr 0x49
[   11.968891] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO) token 3, master_no(2) 100K addr 0x49
[   11.968917] sx865x: probe of 2-0049 failed with error -5
[   11.968929] aml-i2c i2c-B: aml i2c bus driver.
[   11.969025] plat->state_name:default
[   11.969040] master_no = 3, master_regs=fe1087e0
[   11.969668] aml-i2c i2c-C: add adapter aml_i2c_adap3(eab2e4a8)
[   11.969674] aml-i2c i2c-C: aml i2c bus driver.
[   11.969752] plat->state_name:default
[   11.969763] master_no = 4, master_regs=fe108d20
[   11.970909] aml-i2c i2c-D: add adapter aml_i2c_adap4(eab2d4a8)
[   11.970915] aml-i2c i2c-D: aml i2c bus driver.
[   12.332778] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4c
[   12.332923] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4c
[   12.333065] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4c
[   12.333074] pcm512x 1-004c: Failed to reset device: -11
[   12.333177] pcm512x: probe of 1-004c failed with error -11
[   12.333190] i2c i2c-1: new_device: Instantiated device pcm5242 at 0x4c
[   12.593404] card->pinctrl_name:odroid_i2s
[   12.593529] odroid_dac2 odroid_hifi2.6: ASoC: CODEC pcm512x.1-004c not registered
[   12.593568] odroid_dac2 odroid_hifi2.6: snd_soc_register_card failed (-517)
[   12.593588] platform odroid_hifi2.6: Driver odroid_dac2 requests probe deferral
[   12.667758] i2c i2c-1: delete_device: Deleting device pcm5242 at 0x4c
[   12.735912] pcm5102_platform_probe
[   12.744887] card->pinctrl_name:odroid_i2s
[   12.750092] aml-i2s 0:playback preallocate_dma_buffer: area=f29e1000, addr=3c920000, size=65536
[   12.750130] odroid_snd odroid_sound_card.5:  pcm5102 <-> aml-i2s-dai.0 mapping ok
[   12.756820] [adjust link] -> eth: full-duplex
[   12.756823] [adjust link] -> eth: phy_speed <> priv_speed)
[   12.756825] [adjust link] -> eth: switching to RGMII 100
[   12.756836] [adjust link -> eth: am_adjust_link state change (new_state=true)
[   12.756844] libphy: 0:01 - Link is Up - 100/Full
[   12.756893] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.844997] nf_conntrack version 0.5.0 (12868 buckets, 51472 max)
[   13.966729] set_vout_mode[164]
[   44.610242] WARN::urb_dequeue:964: urb->hcpriv == NULL! urb = eaf68000 status=-104

[   44.614027] _hcd_isoc_complete:Uknown urb status -2
[   45.548509] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3
[   45.551884] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3
[   45.562468] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3
[   45.570469] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4
[   45.579287] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4
[   45.587413] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4
[   45.596343] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5
[   45.605083] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5
[   45.613908] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5
[   45.622874] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6
[   45.631679] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6
[   45.640535] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6
[   45.649443] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x7
[   45.658252] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x7
[   45.667146] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x7
[   45.676036] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x8
[   45.685313] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x8
[   45.693668] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x8
[   45.702627] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x9
[   45.711390] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x9
[   45.720284] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x9
[   45.729165] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xa
[   45.737972] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xa
[   45.746820] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xa
[   45.755740] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xb
[   45.764531] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xb
[   45.773353] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xb
[   45.782357] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xc
[   45.791132] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xc
[   45.800807] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xc
[   45.809954] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xd
[   45.818709] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xd
[   45.827610] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xd
[   45.836248] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xe
[   45.845003] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xe
[   45.853082] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xe
[   45.863698] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xf
[   45.871890] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xf
[   45.880595] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0xf
[   45.889168] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x10
[   45.897775] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x10
[   45.906443] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x10
[   45.915443] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x11
[   45.924339] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x11
[   45.933192] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x11
[   45.942450] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x12
[   45.951207] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x12
[   45.960314] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x12
[   45.969320] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x13
[   45.978823] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x13
[   45.989716] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x13
[   45.997649] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x14
[   46.006003] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x14
[   46.014054] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x14
[   46.022940] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x15
[   46.031985] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x15
[   46.040872] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x15
[   46.050144] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x16
[   46.060235] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x16
[   46.067542] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x16
[   46.076530] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x17
[   46.085358] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x17
[   46.096787] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x17
[   46.105872] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x18
[   46.112095] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x18
[   46.121119] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x18
[   46.130359] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x19
[   46.139003] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x19
[   46.148049] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x19
[   46.156942] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1a
[   46.166097] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1a
[   46.175724] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1a
[   46.184733] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1b
[   46.192863] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1b
[   46.201892] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1b
[   46.211253] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1c
[   46.219716] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1c
[   46.228938] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1c
[   46.238939] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1d
[   46.247215] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1d
[   46.256051] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1d
[   46.269755] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1e
[   46.273221] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1e
[   46.282444] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1e
[   46.292250] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1f
[   46.301166] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1f
[   46.309335] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x1f
[   46.318544] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x20
[   46.327572] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x20
[   46.337469] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x20
[   46.346842] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x21
[   46.353778] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x21
[   46.363157] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x21
[   46.373512] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x22
[   46.381674] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x22
[   46.390793] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x22
[   46.398669] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x23
[   46.407449] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x23
[   46.416687] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x23
[   46.426510] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x24
[   46.434535] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x24
[   46.443416] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x24
[   46.452946] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x25
[   46.462114] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x25
[   46.472034] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x25
[   46.479780] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x26
[   46.493831] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x26
[   46.497309] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x26
[   46.523895] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x27
[   46.527371] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x27
[   46.548500] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x27
[   46.559747] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x28
[   46.563221] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x28
[   46.584602] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x28
[   46.588123] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x29
[   46.598414] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x29
[   46.606699] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x29
[   46.616663] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2a
[   46.625170] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2a
[   46.632791] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2a
[   46.643635] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2b
[   46.651434] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2b
[   46.679542] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2b
[   46.683054] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2c
[   46.694121] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2c
[   46.700904] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2c
[   46.711244] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2d
[   46.719630] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2d
[   46.744719] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2d
[   46.748242] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2e
[   46.773700] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2e
[   46.777183] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2e
[   46.803728] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2f
[   46.807598] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2f
[   46.821045] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x2f
[   46.834355] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x30
[   46.838043] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x30
[   46.859027] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x30
[   46.867066] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x31
[   46.875773] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x31
[   46.893965] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x31
[   46.897715] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x32
[   46.916371] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x32
[   46.919840] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x32
[   46.943709] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x33
[   46.947185] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x33
[   46.973612] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x33
[   46.977138] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x34
[   46.993677] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x34
[   46.997183] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x34
[   47.023658] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x35
[   47.027134] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x35
[   47.046750] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x35
[   47.050295] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x36
[   47.073623] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x36
[   47.077105] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x36
[   47.088179] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x37
[   47.095751] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x37
[   47.107546] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x37
[   47.120462] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x38
[   47.124678] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x38
[   47.133677] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x38
[   47.147120] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x39
[   47.150772] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x39
[   47.161471] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x39
[   47.170016] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3a
[   47.180550] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3a
[   47.203522] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3a
[   47.207042] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3b
[   47.224510] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3b
[   47.228109] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3b
[   47.243068] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3c
[   47.248696] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3c
[   47.260715] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3c
[   47.265417] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3d
[   47.274304] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3d
[   47.282311] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3d
[   47.292742] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3e
[   47.301019] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3e
[   47.310032] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3e
[   47.319022] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3f
[   47.327981] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3f
[   47.340018] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x3f
[   47.349145] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x40
[   47.353963] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x40
[   47.365280] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x40
[   47.371819] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x41
[   47.382445] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x41
[   47.390964] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x41
[   47.399494] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x42
[   47.408286] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x42
[   47.417602] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x42
[   47.426320] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x43
[   47.435250] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x43
[   47.444010] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x43
[   47.452320] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x44
[   47.465604] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x44
[   47.470159] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x44
[   47.485461] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x45
[   47.488927] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x45
[   47.501652] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x45
[   47.508163] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x46
[   47.516451] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x46
[   47.525612] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x46
[   47.534659] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x47
[   47.542604] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x47
[   47.554700] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x47
[   47.560539] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x48
[   47.571040] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x48
[   47.579154] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x48
[   47.588254] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x49
[   47.597047] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x49
[   47.605954] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x49
[   47.614978] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4a
[   47.624253] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4a
[   47.632055] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4a
[   47.642493] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4b
[   47.650776] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4b
[   47.659768] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4b
[   47.668554] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4c
[   47.677635] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4c
[   47.686539] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4c
[   47.695493] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4d
[   47.704446] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4d
[   47.712545] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4d
[   47.722973] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4e
[   47.731329] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4e
[   47.740440] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4e
[   47.749243] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4f
[   47.759287] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4f
[   47.779066] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x4f
[   47.782599] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x50
[   47.792924] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x50
[   47.801347] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x50
[   47.810296] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x51
[   47.819173] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x51
[   47.828137] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x51
[   47.837049] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x52
[   47.845891] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x52
[   47.854854] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x52
[   47.863847] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x53
[   47.871984] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x53
[   47.882364] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x53
[   47.890761] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x54
[   47.899626] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x54
[   47.908547] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x54
[   47.917471] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x55
[   47.926421] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x55
[   47.935302] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x55
[   47.944396] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x56
[   47.952485] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x56
[   47.962851] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x56
[   47.970503] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x57
[   47.979377] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x57
[   47.988310] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x57
[   47.997329] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x58
[   48.006201] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x58
[   48.015148] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x58
[   48.024158] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x59
[   48.032984] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x59
[   48.041974] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x59
[   48.050992] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5a
[   48.059876] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5a
[   48.068803] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5a
[   48.077853] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5b
[   48.086701] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5b
[   48.095645] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5b
[   48.104632] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5c
[   48.113531] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5c
[   48.122428] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5c
[   48.131480] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5d
[   48.140371] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5d
[   48.149309] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5d
[   48.158297] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5e
[   48.167217] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5e
[   48.176146] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5e
[   48.185125] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5f
[   48.194014] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5f
[   48.202928] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x5f
[   48.211969] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x60
[   48.220867] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x60
[   48.229816] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x60
[   48.238818] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x61
[   48.247706] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x61
[   48.256637] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x61
[   48.265677] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x62
[   48.274525] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x62
[   48.283471] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x62
[   48.292410] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x63
[   48.301401] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x63
[   48.310298] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x63
[   48.319281] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x64
[   48.328198] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x64
[   48.337123] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x64
[   48.346135] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x65
[   48.355020] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x65
[   48.363962] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x65
[   48.372940] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x66
[   48.381821] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x66
[   48.390797] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x66
[   48.399799] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x67
[   48.408701] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x67
[   48.417643] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x67
[   48.426632] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x68
[   48.435530] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x68
[   48.444527] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x68
[   48.453482] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x69
[   48.462314] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x69
[   48.482928] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x69
[   48.486459] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6a
[   48.503640] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6a
[   48.507117] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6a
[   48.516229] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6b
[   48.525071] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6b
[   48.533980] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6b
[   48.542934] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6c
[   48.551827] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6c
[   48.560857] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6c
[   48.569813] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6d
[   48.578705] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6d
[   48.587658] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6d
[   48.596625] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6e
[   48.605554] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6e
[   48.614480] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6e
[   48.623580] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6f
[   48.632341] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6f
[   48.641320] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x6f
[   48.650708] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x70
[   48.659239] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x70
[   48.668670] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x70
[   48.678179] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x71
[   48.686902] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x71
[   48.695813] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x71
[   48.704205] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x72
[   48.712836] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x72
[   48.721777] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x72
[   48.730783] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x73
[   48.739737] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x73
[   48.748667] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x73
[   48.757636] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x74
[   48.766548] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x74
[   48.775496] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x74
[   48.784722] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x75
[   48.793580] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x75
[   48.806150] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x75
[   48.811283] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x76
[   48.820240] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x76
[   48.829175] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x76
[   48.838157] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x77
[   48.847044] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x77
[   48.857014] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 100K addr 0x77
[   48.901114] Registered IR keymap rc-empty
[   48.901314] input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input2
[   48.913392] rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
[   48.933965] IR NEC protocol handler initialized
[   48.941070] meson-ir c8100580.meson-ir: receiver initialized
[   48.947283] IR RC5(x) protocol handler initialized
[   48.970521] IR Sony protocol handler initialized
[   48.973367] IR RC6 protocol handler initialized
[   48.994687] IR JVC protocol handler initialized
[   48.998009] IR SANYO protocol handler initialized
[   49.004150] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input3
[   49.008213] IR MCE Keyboard/mouse protocol handler initialized
[   49.021984] lirc_dev: IR Remote Control driver registered, major 236 
[   49.037855] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[   49.040571] IR LIRC bridge handler initialized
[   49.150901] input: lircd as /devices/virtual/input/input4

User avatar
rooted
Posts: 6509
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 34 times
Been thanked: 13 times
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by rooted » Wed Feb 13, 2019 5:59 am

Looks to be a USB issue, maybe there exists a quirk for this.

We will see if anyone knows more.

User avatar
odroid
Site Admin
Posts: 31058
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 28 times
Been thanked: 145 times
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by odroid » Wed Feb 13, 2019 9:50 am

Remove J1 jumper first if you use DC barrel jack for power supply.
https://wiki.odroid.com/odroid-c1/hardw ... wer_enable

And use an USB OTG to Host cable something like this for your external DAC since on board USB hub controller might cause the stability issue.
https://www.hardkernel.com/shop/usb2-0-otg-cable/

koozoop
Posts: 8
Joined: Mon Jan 14, 2019 3:05 am
languages_spoken: english
ODROIDs: C1+
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by koozoop » Wed Feb 13, 2019 5:25 pm

Done that, same issues...

koozoop
Posts: 8
Joined: Mon Jan 14, 2019 3:05 am
languages_spoken: english
ODROIDs: C1+
Has thanked: 0
Been thanked: 0
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by koozoop » Wed Feb 13, 2019 5:31 pm

How can I get a log from the console the moment it freezes?

User avatar
rooted
Posts: 6509
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 34 times
Been thanked: 13 times
Contact:

Re: Odroid C1+ and external USB DAC problems

Unread post by rooted » Wed Feb 13, 2019 5:33 pm

koozoop wrote:How can I get a log from the console the moment it freezes?
You need a UART adapter.

Or you can tail the log to a file and it may catch it.

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 0 guests