부팅시 clock off has been failed 발생

Post Reply
nluye1983
Posts: 5
Joined: Sat Jan 19, 2019 4:32 pm
languages_spoken: english
ODROIDs: XU4
Has thanked: 0
Been thanked: 0
Contact:

부팅시 clock off has been failed 발생

Unread post by nluye1983 » Sat Jan 19, 2019 4:51 pm

영문 게시판에 동일 문제가 있는것을 확인했는데
그 사람과 마찬가지로 SD 카드로는 부팅이 않되네요.


U-Boot 2012.07-00036-g4d29c46-dirty (Dec 04 2015 - 15:52:26) for Exynos5422

CPU: Exynos5422 Rev0.1 [Samsung SOC on SMP Platform Base on ARM CortexA7]
APLL = 800MHz, KPLL = 800MHz
MPLL = 532MHz, BPLL = 825MHz

Board: HardKernel ODROID
DRAM: 2 GiB
WARNING: Caches not enabled

TrustZone Enabled BSP
BL1 version: ˇ/·Å‚
VDD_KFC: 0x44
LDO19: 0xf2

Checking Boot Mode ... EMMC
MMC: S5P_MSHC0: 0, S5P_MSHC2: 1
MMC Device 0: 29.1 GiB
MMC Device 1: Clock OFF has been failed.


무슨 방법 있는지 알려주세요..ㅠㅠ

nluye1983
Posts: 5
Joined: Sat Jan 19, 2019 4:32 pm
languages_spoken: english
ODROIDs: XU4
Has thanked: 0
Been thanked: 0
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by nluye1983 » Sat Jan 19, 2019 4:58 pm

viewtopic.php?t=6122
이 게시글이군요.

User avatar
odroid
Site Admin
Posts: 31773
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 85 times
Been thanked: 241 times
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by odroid » Mon Jan 21, 2019 9:56 am

아주 오래된 OS를 사용하시는 것 같습니다.
OS 이미지는 아래 최신 버전을 설치하셨는지요?
https://wiki.odroid.com/odroid-xu4/os_i ... 4/20181203

Code: Select all

U-Boot 2017.05-15377-gedb23d4 (Aug 24 2017 - 07:09:51 -0300) for ODROID-XU4

nluye1983
Posts: 5
Joined: Sat Jan 19, 2019 4:32 pm
languages_spoken: english
ODROIDs: XU4
Has thanked: 0
Been thanked: 0
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by nluye1983 » Tue Jan 22, 2019 10:43 pm

답변 감사합니다.

CLI로 부팅은 가능한데 USB나 이더넷포트가 인식하지 못하네요.
USB-WIFI로 인터넷 연결을 하고 싶은데 불가능하네요.

lshw, lspci, ifconfig 등등으로 장치가 확인이 않되요.

odroid@odroid:~$ dmesg | grep usb
[ 0.000000] [c0] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 smsc95xx.macaddr=00:1e:06:61:7a:39 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usbhid.quirks=0x0eef:0x0005:0x0004
[ 0.333965] [c6] usbcore: registered new interface driver usbfs
[ 0.334095] [c6] usbcore: registered new interface driver hub
[ 0.334336] [c6] usbcore: registered new device driver usb
[ 3.559030] [c4] s5p-ehci 12110000.usb: EHCI Host Controller
[ 3.564226] [c4] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[ 3.576725] [c4] s5p-ehci 12110000.usb: can't setup
[ 3.580196] [c4] s5p-ehci 12110000.usb: USB bus 1 deregistered
[ 3.586023] [c4] s5p-ehci 12110000.usb: Failed to add USB HCD
[ 3.591788] [c4] s5p-ehci: probe of 12110000.usb failed with error -110
[ 3.605434] [c4] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
[ 3.611466] [c4] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 1
[ 3.619563] [c4] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
[ 3.679113] [c4] exynos-ohci 12120000.usb: init err (00000000 0000)
[ 3.683926] [c4] exynos-ohci 12120000.usb: can't start 12120000.usb
[ 3.690273] [c4] exynos-ohci 12120000.usb: startup error -75
[ 3.695859] [c4] exynos-ohci 12120000.usb: USB bus 1 deregistered
[ 3.701980] [c4] exynos-ohci 12120000.usb: Failed to add USB HCD
[ 3.707965] [c4] exynos-ohci: probe of 12120000.usb failed with error -75
[ 3.821709] [c4] usbcore: registered new interface driver usb-storage
[ 3.826926] [c4] usbcore: registered new interface driver usbserial
[ 3.833066] [c4] usbcore: registered new interface driver usbserial_generic
[ 3.840177] [c4] usbserial: USB Serial support registered for generic
[ 3.847140] [c5] exynos-usb-switch usb-switch.10: host detect gpio is not available
[ 3.854039] [c5] exynos-usb-switch usb-switch.10: device detect gpio is not available
[ 3.861820] [c5] exynos-usb-switch usb-switch.10: vbus control gpio is not available
[ 3.869552] [c5] exynos-usb-switch usb-switch.10: failed to configure pins
[ 3.876567] [c5] exynos-usb-switch usb-switch.10: udc device is not available
[ 3.883491] [c5] exynos-usb-switch usb-switch.10: Disable device detect IRQ
[ 3.890436] [c5] usb cable = 1
[ 4.485784] [c7] usbcore: registered new interface driver usbhid
[ 4.491293] [c7] usbhid: USB HID core driver

usb 장치도 이렇게 나오네요..

AS나 다른 방법이 있을까요??

User avatar
odroid
Site Admin
Posts: 31773
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 85 times
Been thanked: 241 times
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by odroid » Wed Jan 23, 2019 9:12 am

OS 이미지를 Etcher로 기록하셨나요? Mate desktop GUI로 부팅해야 정상입니다.
OS 이미지 파일명 확인 바랍니다. ubuntu-18.04.1-4.14-mate-odroid-xu4-20181203.img.xz

그리고 "lsusb"와 "lsusb -t" 출력을 올려봐 주세요.

nluye1983
Posts: 5
Joined: Sat Jan 19, 2019 4:32 pm
languages_spoken: english
ODROIDs: XU4
Has thanked: 0
Been thanked: 0
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by nluye1983 » Thu Jan 24, 2019 11:13 am

해당 이미지를 eMMC에 Etcher로 기록하고 부팅했습니다
clock off has been failed 메세지나오고 5분 후에 부팅되는건 여전하네요
그리고 HDMI연결인데 CLI모드로 부팅이 되네요
USB에 키보드 연결해도 입력이 않되서 로그인 불가합니다

User avatar
odroid
Site Admin
Posts: 31773
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 85 times
Been thanked: 241 times
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by odroid » Thu Jan 24, 2019 11:33 am

보드의 USB 쪽에 전기적 쇼크가 가해져 망가진것 같습니다. 언제 구입하셨죠?

그리고 시리얼 콘솔에서 "lsusb"와 "lsusb -t" 출력을 올려봐 주세요.

nluye1983
Posts: 5
Joined: Sat Jan 19, 2019 4:32 pm
languages_spoken: english
ODROIDs: XU4
Has thanked: 0
Been thanked: 0
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by nluye1983 » Thu Jan 24, 2019 2:58 pm

17년 2월에 구매했습니다.

root@odroid:~# lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@odroid:~# lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M

User avatar
odroid
Site Admin
Posts: 31773
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 85 times
Been thanked: 241 times
Contact:

Re: 부팅시 clock off has been failed 발생

Unread post by odroid » Thu Jan 24, 2019 5:12 pm

네, 예상대로 허브칩이나 CPU가 손상된것 같습니다.
정상이라면 아래와 같이 나와야 합니다.

Code: Select all

odroid@odroid:~$ lsusb -t                                                                                                             
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 5, If 0, Class=Hub, Driver=hub/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
죄송합니다만 수리하는데 보드값보다 훨씬 큰 비용이 소요됩니다. 또한 수리가 가능하다라는 보장도 어렵습니다.

Post Reply

Return to “XU4/HC1+/HC2/XU3”

Who is online

Users browsing this forum: No registered users and 0 guests