HC-1 HDD suddenly stopped being visible.

Post Reply
bzyx
Posts: 3
Joined: Thu Feb 08, 2018 4:51 pm
languages_spoken: english, polish
ODROIDs: HC1
Contact:

HC-1 HDD suddenly stopped being visible.

Unread post by bzyx » Mon Dec 24, 2018 8:55 pm

Hello,

today I obsevred some strange behaviour with 'syncthing' and after some investigation I noticed that my HDD is not visible anymore, tried to reboot the board but still no clue of working. Can you provide some info about what can happed and how can I check the state?

Here are some logs from the board:
dmesg:

Code: Select all

root@odroidhc1:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.9.61-odroidxu4 (root@armbian) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #2 SMP PREEMPT Wed Nov 22 16:34:23 CET 2017
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=70c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Hardkernel Odroid XU4
[    0.000000] cma: Reserved 128 MiB at 0x00000000b6800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000] free_area_init_node: node 0, pgdat c1055540, node_mem_map eee25000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:31
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 14 pages/cpu @eed7f000 s26636 r8192 d22516 u57344
[    0.000000] pcpu-alloc: s26636 r8192 d22516 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 consoleblank=0 loglevel=1 panic=10 root=UUID=2db917ed-05ca-4752-961e-fd93b71d4fd4 rootfstype=btrfs rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u  s5p_mfc.mem=16M
[    0.000000] hdmi: using HDMI mode
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1903072K/2074624K available (8192K kernel code, 345K rwdata, 2356K rodata, 2048K init, 349K bss, 40480K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0xc0008000 - 0xc0a00000   (10208 kB)
                     .init : 0xc0e00000 - 0xc1000000   (2048 kB)
                     .data : 0xc1000000 - 0xc1056500   ( 346 kB)
                      .bss : 0xc1058000 - 0xc10af5ac   ( 350 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] hperf_hmp: fast CPUs mask: 000000F0
[    0.000000] hperf_hmp: slow CPUs mask: 0000000F
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000006] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.001840] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.001856] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.001873] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001883] Ignoring duplicate/late registration of read_current_timer delay
[    0.002108] Console: colour dummy device 80x30
[    0.002124] console [tty1] enabled
[    0.002147] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.002161] pid_max: default: 32768 minimum: 301
[    0.002370] Security Framework initialized
[    0.002381] AppArmor: AppArmor disabled by boot time parameter
[    0.002439] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002448] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003368] CPU: Testing write buffer coherency: ok
[    0.004143] CPU0: update cpu_capacity 551
[    0.004152] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.004266] Setting up static identity map for 0x40200000 - 0x4020004c
[    0.004922] ARM CCI driver probed
[    0.005204] Exynos MCPM support installed
[    0.090310] CPU1: update cpu_capacity 551
[    0.090318] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.091224] CPU2: update cpu_capacity 551
[    0.091231] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.092055] CPU3: update cpu_capacity 551
[    0.092062] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.092852] CPU4: update cpu_capacity 1496
[    0.092859] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093890] CPU5: update cpu_capacity 1496
[    0.093896] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.094778] CPU6: update cpu_capacity 1496
[    0.094785] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.095607] CPU7: update cpu_capacity 1496
[    0.095614] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.095718] Brought up 8 CPUs
[    0.095729] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.095735] CPU: All CPU(s) started in HYP mode.
[    0.095740] CPU: Virtualization extensions available.
[    0.096433] devtmpfs: initialized
[    0.122270] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.122447] hperf_hmp: registered cpufreq transition notifier
[    0.122596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[    0.122611] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.125184] xor: measuring software checksum speed
[    0.174965]    arm4regs  :  1537.600 MB/sec
[    0.224964]    8regs     :  1162.400 MB/sec
[    0.274965]    32regs    :  1132.000 MB/sec
[    0.324965]    neon      :  2240.000 MB/sec
[    0.324972] xor: using function: neon (2240.000 MB/sec)
[    0.325065] pinctrl core: initialized pinctrl subsystem
[    0.326915] NET: Registered protocol family 16
[    0.329328] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.344239] cpuidle: using governor menu
[    0.360366] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.360373] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.370113] exynos-audss-clk 3810000.audss-clock-controller:: epll 180633609
[    0.371965] iommu: Adding device 10850000.g2d: to group 0
[    0.378400] iommu: Adding device 11000000.codec: to group 1
[    0.403445] iommu: Adding device 14450000.mixer: to group 2
[    0.403907] iommu: Adding device 11c00000.rotator: to group 3
[    0.408448] iommu: Adding device 13e00000.video-scaler: to group 4
[    0.408903] iommu: Adding device 13e10000.video-scaler: to group 5
[    0.409379] iommu: Adding device 11f50000.jpeg: to group 6
[    0.409843] iommu: Adding device 11f60000.jpeg: to group 7
[    0.410160] EXYNOS5420 PMU initialized
[    0.525027] raid6: int32x1  gen()   179 MB/s
[    0.609984] raid6: int32x1  xor()   184 MB/s
[    0.695122] raid6: int32x2  gen()   275 MB/s
[    0.779987] raid6: int32x2  xor()   235 MB/s
[    0.865038] raid6: int32x4  gen()   337 MB/s
[    0.950068] raid6: int32x4  xor()   261 MB/s
[    1.034980] raid6: int32x8  gen()   396 MB/s
[    1.120059] raid6: int32x8  xor()   246 MB/s
[    1.205011] raid6: neonx1   gen()   721 MB/s
[    1.279992] random: fast init done
[    1.289983] raid6: neonx1   xor()   626 MB/s
[    1.375031] raid6: neonx2   gen()  1022 MB/s
[    1.459983] raid6: neonx2   xor()   958 MB/s
[    1.544998] raid6: neonx4   gen()  1400 MB/s
[    1.630014] raid6: neonx4   xor()   997 MB/s
[    1.715010] raid6: neonx8   gen()  1289 MB/s
[    1.799997] raid6: neonx8   xor()   932 MB/s
[    1.800004] raid6: using algorithm neonx4 gen() 1400 MB/s
[    1.800010] raid6: .... xor() 997 MB/s, rmw enabled
[    1.800017] raid6: using intx1 recovery algorithm
[    1.801740] SCSI subsystem initialized
[    1.802005] usbcore: registered new interface driver usbfs
[    1.802072] usbcore: registered new interface driver hub
[    1.802220] usbcore: registered new device driver usb
[    1.802887] i2c-gpio soc:i2c-hdmi:: using pins 177 (SDA) and 178 (SCL)
[    1.803457] s3c-i2c 12c70000.i2c:: slave address 0x00
[    1.803470] s3c-i2c 12c70000.i2c:: bus frequency set to 378 KHz
[    1.803736] s3c-i2c 12c70000.i2c:: i2c-1: S3C I2C adapter
[    1.804164] media: Linux media interface: v0.10
[    1.804215] Linux video capture interface: v2.00
[    1.804613] s3c2410-wdt 101d0000.watchdog:: watchdog inactive, reset disabled, irq disabled
[    1.805373] Advanced Linux Sound Architecture Driver Initialized.
[    1.806007] NetLabel: Initializing
[    1.806014] NetLabel:  domain hash size = 128
[    1.806019] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.806074] NetLabel:  unlabeled traffic allowed by default
[    1.807037] clocksource: Switched to clocksource mct-frc
[    1.807215] VFS: Disk quotas dquot_6.6.0
[    1.807279] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.821557] NET: Registered protocol family 2
[    1.822226] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.822301] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.822454] TCP: Hash tables configured (established 8192 bind 8192)
[    1.822502] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.822537] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.822753] NET: Registered protocol family 1
[    1.823274] RPC: Registered named UNIX socket transport module.
[    1.823281] RPC: Registered udp transport module.
[    1.823287] RPC: Registered tcp transport module.
[    1.823294] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.823493] Trying to unpack rootfs image as initramfs...
[    2.160857] Freeing initrd memory: 5628K
[    2.161301] kvm [1]: 8-bit VMID
[    2.161308] kvm [1]: IDMAP page: 40201000
[    2.161316] kvm [1]: HYP VA range: c0000000:ffffffff
[    2.162270] kvm [1]: Hyp mode initialized successfully
[    2.162325] kvm [1]: vgic-v2@10484000
[    2.162668] kvm [1]: vgic interrupt IRQ16
[    2.162690] kvm [1]: virtual timer IRQ60
[    2.165763] audit: initializing netlink subsys (disabled)
[    2.165801] audit: type=2000 audit(2.160:1): initialized
[    2.166049] Initialise system trusted keyrings
[    2.166504] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.177194] zbud: loaded
[    2.181064] NFS: Registering the id_resolver key type
[    2.181084] Key type id_resolver registered
[    2.181091] Key type id_legacy registered
[    2.181108] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.181123] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.182342] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    2.183095] JFS: nTxBlock = 8192, nTxLock = 65536
[    2.187955] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.196688] Key type asymmetric registered
[    2.196745] bounce: pool size: 64 pages
[    2.196986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.197177] io scheduler noop registered
[    2.197184] io scheduler deadline registered
[    2.197439] io scheduler cfq registered (default)
[    2.200174] 12130000.phy: supply vbus not found, using dummy regulator
[    2.201214] 12100000.phy: supply vbus not found, using dummy regulator
[    2.201277] 12100000.phy: supply vbus-boost not found, using dummy regulator
[    2.201653] 12500000.phy: supply vbus not found, using dummy regulator
[    2.201725] 12500000.phy: supply vbus-boost not found, using dummy regulator
[    2.206941] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    2.206952] dma-pl330 3880000.adma:  DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    2.210376] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    2.210387] dma-pl330 121a0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    2.213778] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    2.213789] dma-pl330 121b0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    2.214780] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    2.214791] dma-pl330 10800000.mdma:         DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    2.283541] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.286144] 12c00000.serial:: ttySAC0 at MMIO 0x12c00000 (irq = 80, base_baud = 0) is a S3C6400/10
[    2.286566] 12c10000.serial:: ttySAC1 at MMIO 0x12c10000 (irq = 81, base_baud = 0) is a S3C6400/10
[    2.286978] 12c20000.serial:: ttySAC2 at MMIO 0x12c20000 (irq = 82, base_baud = 0) is a S3C6400/10
[    2.287091] console [ttySAC2] enabled
[    2.287508] 12c30000.serial:: ttySAC3 at MMIO 0x12c30000 (irq = 83, base_baud = 0) is a S3C6400/10
[    2.288906] [drm] Initialized
[    2.290465] exynos-hdmi 14530000.hdmi:: Failed to get supply 'vdd': -517
[    2.291672] exynos-rot 11c00000.rotator:: The exynos rotator is probed successfully
[    2.292328] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.296748] mali 11800000.mali:: GPU identified as 0x0620 r0p1 status 0
[    2.297464] devfreq 11800000.mali:: Couldn't update frequency transition information.
[    2.297475] mali 11800000.mali:: could not find power_model node
[    2.298074] mali 11800000.mali:: Probed as mali0
[    2.312406] brd: module loaded
[    2.321394] loop: module loaded
[    2.322283] libphy: Fixed MDIO Bus: probed
[    2.322674] usbcore: registered new interface driver r8152
[    2.322739] usbcore: registered new interface driver cdc_ether
[    2.322790] usbcore: registered new interface driver cdc_subset
[    2.323337] exynos-dwc3 soc:usb3-0:: no suspend clk specified
[    2.323431] exynos-dwc3 soc:usb3-1:: no suspend clk specified
[    2.324716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.324722] ehci-exynos: EHCI EXYNOS driver
[    2.325133] exynos-ehci 12110000.usb:: EHCI Host Controller
[    2.325161] exynos-ehci 12110000.usb:: new USB bus registered, assigned bus number 1
[    2.325382] exynos-ehci 12110000.usb:: irq 94, io mem 0x12110000
[    2.337073] exynos-ehci 12110000.usb:: USB 2.0 started, EHCI 1.00
[    2.337291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.337302] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.337311] usb usb1: Product: EHCI Host Controller
[    2.337319] usb usb1: Manufacturer: Linux 4.9.61-odroidxu4 ehci_hcd
[    2.337328] usb usb1: SerialNumber: 12110000.usb:
[    2.338036] hub 1-0:1.0: USB hub found
[    2.338076] hub 1-0:1.0: 3 ports detected
[    2.339018] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.339037] ohci-exynos: OHCI EXYNOS driver
[    2.339292] exynos-ohci 12120000.usb:: USB Host Controller
[    2.339317] exynos-ohci 12120000.usb:: new USB bus registered, assigned bus number 2
[    2.339443] exynos-ohci 12120000.usb:: irq 94, io mem 0x12120000
[    2.401268] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.401278] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.401286] usb usb2: Product: USB Host Controller
[    2.401294] usb usb2: Manufacturer: Linux 4.9.61-odroidxu4 ohci_hcd
[    2.401302] usb usb2: SerialNumber: 12120000.usb:
[    2.401952] hub 2-0:1.0: USB hub found
[    2.401992] hub 2-0:1.0: 3 ports detected
[    2.403573] usbcore: registered new interface driver cdc_wdm
[    2.403679] usbcore: registered new interface driver usb-storage
[    2.404429] mousedev: PS/2 mouse device common for all mice
[    2.406001] i2c /dev entries driver
[    2.408868] LDO4: mapping for mode 1 not defined
[    2.409339] LDO27: mapping for mode 1 not defined
[    2.409375] LDO28: mapping for mode 1 not defined
[    2.409412] LDO30: mapping for mode 1 not defined
[    2.421717] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.433126] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
[    2.441411] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    3.499796] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    3.502633] IR NEC protocol handler initialized
[    3.502639] IR RC5(x/sz) protocol handler initialized
[    3.502646] IR RC6 protocol handler initialized
[    3.502652] IR JVC protocol handler initialized
[    3.502658] IR Sony protocol handler initialized
[    3.502664] IR SANYO protocol handler initialized
[    3.502670] IR Sharp protocol handler initialized
[    3.502676] IR MCE Keyboard/mouse protocol handler initialized
[    3.502682] IR XMP protocol handler initialized
[    3.503692] s5p-jpeg 11f50000.jpeg:: encoder device registered as /dev/video20
[    3.503867] s5p-jpeg 11f50000.jpeg:: decoder device registered as /dev/video21
[    3.503874] s5p-jpeg 11f50000.jpeg:: Samsung S5P JPEG codec
[    3.504207] s5p-jpeg 11f60000.jpeg:: encoder device registered as /dev/video22
[    3.504399] s5p-jpeg 11f60000.jpeg:: decoder device registered as /dev/video23
[    3.504405] s5p-jpeg 11f60000.jpeg:: Samsung S5P JPEG codec
[    3.522635] s5p-mfc 11000000.codec:: preallocated 16 MiB buffer for the firmware and context buffers
[    3.522866] s5p-mfc 11000000.codec:: decoder registered as /dev/video10
[    3.523046] s5p-mfc 11000000.codec:: encoder registered as /dev/video11
[    3.532218] device-mapper: uevent: version 1.0.3
[    3.532637] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    3.541472] sdhci: Secure Digital Host Controller Interface driver
[    3.541478] sdhci: Copyright(c) Pierre Ossman
[    3.541888] Synopsys Designware Multimedia Card Interface Driver
[    3.543178] dwmmc_exynos 12200000.mmc:: IDMAC supports 32-bit address mode.
[    3.543300] dwmmc_exynos 12200000.mmc:: Using internal DMA controller.
[    3.543314] dwmmc_exynos 12200000.mmc:: Version ID is 250a
[    3.543374] dwmmc_exynos 12200000.mmc:: DW MMC controller at irq 97,64 bit host data width,64 deep fifo
[    3.543674] dwmmc_exynos 12200000.mmc:: Got CD GPIO
[    3.543770] dwmmc_exynos 12200000.mmc:: allocated mmc-pwrseq
[    3.568428] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.587230] dwmmc_exynos 12200000.mmc:: 1 slots initialized
[    3.587450] dwmmc_exynos 12220000.mmc:: IDMAC supports 32-bit address mode.
[    3.587479] dwmmc_exynos 12220000.mmc:: Using internal DMA controller.
[    3.587488] dwmmc_exynos 12220000.mmc:: Version ID is 250a
[    3.587518] dwmmc_exynos 12220000.mmc:: DW MMC controller at irq 98,64 bit host data width,64 deep fifo
[    3.612482] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.632082] dwmmc_exynos 12220000.mmc:: 1 slots initialized
[    3.632800] hidraw: raw HID events driver (C) Jiri Kosina
[    3.632968] usbcore: registered new interface driver usbhid
[    3.632971] usbhid: USB HID core driver
[    3.650074] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp:
[    3.650208] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp:
[    3.650337] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp:
[    3.650457] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp:
[    3.655908] odroid-audio sound:: dit-hifi <-> 3830000.i2s: mapping ok
[    3.656798] NET: Registered protocol family 17
[    3.656822] NET: Registered protocol family 15
[    3.656880] Key type dns_resolver registered
[    3.657472] Registering SWP/SWPB emulation handler
[    3.657868] registered taskstats version 1
[    3.657872] Loading compiled-in X.509 certificates
[    3.657937] zswap: loaded using pool lzo/zbud
[    3.658870] Btrfs loaded, crc32c=crc32c-generic
[    3.671111] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    3.671148] Key type encrypted registered
[    3.671227] mmc1: new high speed SDXC card at address 0001
[    3.676849] mmcblk1: mmc1:0001 EC2QT 59.6 GiB
[    3.678011]  mmcblk1: p1 p2 p3
[    3.694121] [drm] Exynos DRM: using 14450000.mixer: device for DMA mapping operations
[    3.694306] exynos-drm exynos-drm: bound 14450000.mixer: (ops 0xc0a6aec0)
[    3.694441] exynos-drm exynos-drm: bound 14530000.hdmi: (ops 0xc0a6b068)
[    3.694446] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.694450] [drm] No driver support for vblank timestamp query.
[    3.694501] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[    3.694681] exynos-dwc3 soc:usb3-0:: no suspend clk specified
[    3.700529] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    3.700569] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    3.701147] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[    3.701235] xhci-hcd xhci-hcd.2.auto: irq 146, io mem 0x12000000
[    3.701618] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.701634] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.701647] usb usb3: Product: xHCI Host Controller
[    3.701660] usb usb3: Manufacturer: Linux 4.9.61-odroidxu4 xhci-hcd
[    3.701672] usb usb3: SerialNumber: xhci-hcd.2.auto
[    3.702850] hub 3-0:1.0: USB hub found
[    3.702948] hub 3-0:1.0: 1 port detected
[    3.703673] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    3.703702] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    3.703880] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.704147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.704164] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.704177] usb usb4: Product: xHCI Host Controller
[    3.704191] usb usb4: Manufacturer: Linux 4.9.61-odroidxu4 xhci-hcd
[    3.704203] usb usb4: SerialNumber: xhci-hcd.2.auto
[    3.705366] hub 4-0:1.0: USB hub found
[    3.705459] hub 4-0:1.0: 1 port detected
[    3.706707] exynos-dwc3 soc:usb3-1:: no suspend clk specified
[    3.710023] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    3.710061] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    3.710599] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[    3.710686] xhci-hcd xhci-hcd.5.auto: irq 147, io mem 0x12400000
[    3.711002] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.711019] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711032] usb usb5: Product: xHCI Host Controller
[    3.711045] usb usb5: Manufacturer: Linux 4.9.61-odroidxu4 xhci-hcd
[    3.711058] usb usb5: SerialNumber: xhci-hcd.5.auto
[    3.712134] hub 5-0:1.0: USB hub found
[    3.712198] hub 5-0:1.0: 1 port detected
[    3.712856] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    3.712884] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    3.713023] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.713271] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.713286] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.713300] usb usb6: Product: xHCI Host Controller
[    3.713312] usb usb6: Manufacturer: Linux 4.9.61-odroidxu4 xhci-hcd
[    3.713324] usb usb6: SerialNumber: xhci-hcd.5.auto
[    3.714370] hub 6-0:1.0: USB hub found
[    3.714432] hub 6-0:1.0: 1 port detected
[    3.716275] s3c-rtc 101e0000.rtc:: rtc disabled, re-enabling
[    3.716478] rtc rtc1: invalid alarm value: 1900-1-6 0:0:0
[    3.716788] s3c-rtc 101e0000.rtc:: rtc core: registered s3c as rtc1
[    3.719475] exynos-bus: new bus device registered: soc:bus_wcore: ( 84000 KHz ~ 400000 KHz)
[    3.720903] exynos-bus: new bus device registered: soc:bus_noc: ( 67000 KHz ~ 100000 KHz)
[    3.722079] exynos-bus: new bus device registered: soc:bus_fsys_apb: (100000 KHz ~ 200000 KHz)
[    3.722866] exynos-bus: new bus device registered: soc:bus_fsys: (100000 KHz ~ 200000 KHz)
[    3.724123] exynos-bus: new bus device registered: soc:bus_fsys2: ( 75000 KHz ~ 150000 KHz)
[    3.725673] exynos-bus: new bus device registered: soc:bus_mfc: ( 96000 KHz ~ 333000 KHz)
[    3.727139] exynos-bus: new bus device registered: soc:bus_gen: ( 89000 KHz ~ 267000 KHz)
[    3.728119] exynos-bus: new bus device registered: soc:bus_peri: ( 67000 KHz ~  67000 KHz)
[    3.729663] exynos-bus: new bus device registered: soc:bus_g2d: ( 84000 KHz ~ 333000 KHz)
[    3.731073] exynos-bus: new bus device registered: soc:bus_g2d_acp: ( 67000 KHz ~ 267000 KHz)
[    3.732523] exynos-bus: new bus device registered: soc:bus_jpeg: ( 75000 KHz ~ 300000 KHz)
[    3.733938] exynos-bus: new bus device registered: soc:bus_jpeg_apb: ( 84000 KHz ~ 167000 KHz)
[    3.735069] exynos-bus: new bus device registered: soc:bus_disp1_fimd: (120000 KHz ~ 200000 KHz)
[    3.736333] exynos-bus: new bus device registered: soc:bus_disp1: (120000 KHz ~ 300000 KHz)
[    3.737628] exynos-bus: new bus device registered: soc:bus_gscl_scaler: (150000 KHz ~ 300000 KHz)
[    3.739193] exynos-bus: new bus device registered: soc:bus_mscl: ( 84000 KHz ~ 400000 KHz)
[    3.740616] input: gpio_keys: as /devices/platform/gpio_keys:/input/input0
[    3.742113] Power domain power-domain@10044120 disable failed
[    3.743159] s5m-rtc s2mps14-rtc: setting system clock to 2018-12-24 11:41:03 UTC (1545651663)
[    3.746725] ALSA device list:
[    3.746736]   #0: odroid-snd
[    3.751254] Freeing unused kernel memory: 2048K
[    4.792489] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.814321] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
[    4.814348] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.814369] usb 6-1: Product: USB 10/100/1000 LAN
[    4.814389] usb 6-1: Manufacturer: Realtek
[    4.814408] usb 6-1: SerialNumber: 000001000000
[    4.977253] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    5.075049] r8152 6-1:1.0 eth0: v1.08.8
[    5.138724] md: linear personality registered for level -1
[    5.150072] md: multipath personality registered for level -4
[    5.157420] md: raid0 personality registered for level 0
[    5.165250] md: raid1 personality registered for level 1
[    5.172245] async_tx: api initialized (async)
[    5.179199] md: raid6 personality registered for level 6
[    5.179215] md: raid5 personality registered for level 5
[    5.179227] md: raid4 personality registered for level 4
[    5.199559] md: raid10 personality registered for level 10
[    5.503282] BTRFS: device label SDCARD devid 1 transid 357300 /dev/mmcblk1p3
[    5.504043] BTRFS: device label ROOTFS devid 1 transid 49081 /dev/mmcblk1p2
[    5.667474] BTRFS info (device mmcblk1p2): disk space caching is enabled
[    5.667483] BTRFS info (device mmcblk1p2): has skinny extents
[    5.722736] BTRFS info (device mmcblk1p2): detected SSD devices, enabling SSD mode
[    5.737226] BTRFS info (device mmcblk1p2): checking UUID tree
[    6.469086] NET: Registered protocol family 10
[    6.481364] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.506110] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.506986] systemd[1]: Detected architecture arm.
[    6.530523] systemd[1]: Set hostname to <odroidhc1>.
[    7.539882] systemd[1]: [/etc/systemd/system/syncthing-inotify@marcin.service:14] Unknown lvalue 'Requires' in section 'Install'
[    7.577138] systemd[1]: Listening on Journal Socket.
[    7.592731] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.612415] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.632281] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.652210] systemd[1]: Listening on Syslog Socket.
[    7.667253] systemd[1]: Listening on udev Control Socket.
[    8.032992] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
[    8.035793] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned.
[    8.036208] spidev spi1.0: spidev spi1.0 1000kHz 8 bits mode=0x00
[    8.036216] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    8.036397] spidev spi1.0: Deleting spi1.0
[    8.036857] fbtft_device: GPIOS used by 'hktft9340':
[    8.036861] fbtft_device: 'reset' = GPIO21
[    8.036866] fbtft_device: 'dc' = GPIO22
[    8.036870] fbtft_device: 'led' = GPIO18
[    8.036878] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    8.036885] spi spi1.0: fb_ili9340 spi1.0 35000kHz 8 bits mode=0x00
[    8.545330] random: crng init done
[    9.318386] BTRFS warning (device mmcblk1p2): excessive commit interval 600
[    9.318399] BTRFS info (device mmcblk1p2): use lzo compression
[    9.318407] BTRFS info (device mmcblk1p2): disk space caching is enabled
[    9.789164] systemd-journald[370]: Received request to flush runtime journal from PID 1
[   10.508049] gpiomem-exynos 13400000.gpiomem:: Initialised: GPIO register area is 2
[   10.508209] gpiomem-exynos 13400000.gpiomem:: Initialised: Registers at 0x13400000
[   10.508215] gpiomem-exynos 13400000.gpiomem:: Initialised: Registers at 0x14010000
[   10.514757] Driver for 1-wire Dallas network protocol.
[   10.541201] s5p-secss 10830000.sss:: s5p-sss driver registered
[   10.591093] fb_ili9340: module is from the staging directory, the quality is unknown, you have been warned.
[   11.136602] Console: switching to colour frame buffer device 40x15
[   11.136936] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB DMA buffer memory, fps=20, spi1.0 at 35 MHz
[   11.435453] BTRFS info (device mmcblk1p3): turning on discard
[   11.435460] BTRFS info (device mmcblk1p3): use ssd allocation scheme
[   11.435466] BTRFS info (device mmcblk1p3): disk space caching is enabled
[   11.435471] BTRFS info (device mmcblk1p3): has skinny extents
[   11.550514] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: commit=600,errors=remount-ro
[   12.258665] r8152 6-1:1.0 eth0: carrier on
[   16.296832] 8021q: 802.1Q VLAN Support v1.8
[   17.818234] zram: Added device: zram0
[   17.819545] zram: Added device: zram1
[   17.821043] zram: Added device: zram2
[   17.823576] zram: Added device: zram3
[   17.825877] zram: Added device: zram4
[   17.827298] zram: Added device: zram5
[   17.829282] zram: Added device: zram6
[   17.831629] zram: Added device: zram7
[   17.928534] zram0: detected capacity change from 0 to 130678784
[   18.052561] Adding 127612k swap on /dev/zram0.  Priority:5 extents:1 across:127612k SSFS
[   18.054255] zram1: detected capacity change from 0 to 130678784
[   18.075094] Adding 127612k swap on /dev/zram1.  Priority:5 extents:1 across:127612k SSFS
[   18.076816] zram2: detected capacity change from 0 to 130678784
[   18.099893] Adding 127612k swap on /dev/zram2.  Priority:5 extents:1 across:127612k SSFS
[   18.101683] zram3: detected capacity change from 0 to 130678784
[   18.123949] Adding 127612k swap on /dev/zram3.  Priority:5 extents:1 across:127612k SSFS
[   18.125583] zram4: detected capacity change from 0 to 130678784
[   18.156349] Adding 127612k swap on /dev/zram4.  Priority:5 extents:1 across:127612k SSFS
[   18.162410] zram5: detected capacity change from 0 to 130678784
[   18.191730] Adding 127612k swap on /dev/zram5.  Priority:5 extents:1 across:127612k SSFS
[   18.194183] zram6: detected capacity change from 0 to 130678784
[   18.227716] Adding 127612k swap on /dev/zram6.  Priority:5 extents:1 across:127612k SSFS
[   18.230528] zram7: detected capacity change from 0 to 130678784
[   18.275147] Adding 127612k swap on /dev/zram7.  Priority:5 extents:1 across:127612k SSFS
[   19.692450] NFSD: starting 90-second grace period (net c104f240)
[   20.870016] aufs 4.9-20170220
[   29.924178] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   29.996325] Bridge firewalling registered
[   30.036247] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   32.099410] Initializing XFRM netlink socket
[   32.153658] Netfilter messages via NETLINK v0.30.
[   32.188674] ctnetlink v0.93: registering with nfnetlink.
[  304.113725] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  304.113741] xhci-hcd xhci-hcd.2.auto: Cannot set link state.
[  304.113759] usb usb4-port1: cannot disable (err = -32)
[  308.223731] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[  308.223746] xhci-hcd xhci-hcd.2.auto: Cannot set link state.
[  308.223764] usb usb4-port1: cannot disable (err = -32)

uname -a

Code: Select all

root@odroidhc1:~# uname -a
Linux odroidhc1 4.9.61-odroidxu4 #2 SMP PREEMPT Wed Nov 22 16:34:23 CET 2017 armv7l GNU/Linux
lsusb -t

Code: Select all

root@odroidhc1:~# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
root@odroidhc1:~#
I've been using original Hardkernel power-supply 12V/4A and the HDD was Seagate Backup Plus Portable 5TB (taken form the cover - the same as on hardkernel wiki)
Any ideas? :o :o :o :( :( :(

bzyx
Posts: 3
Joined: Thu Feb 08, 2018 4:51 pm
languages_spoken: english, polish
ODROIDs: HC1
Contact:

Re: HC-1 HDD suddenly stopped being visible.

Unread post by bzyx » Mon Dec 24, 2018 11:28 pm

So I tried to shutdown gracefully from OMV and then turned off the power supply for some time, then rebooted and it works fine again. Very strange...

User avatar
odroid
Site Admin
Posts: 29394
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HC-1 HDD suddenly stopped being visible.

Unread post by odroid » Wed Dec 26, 2018 9:49 am

You are using a very old kernel.
As far as I remember, the latest OMV4 supports kernel 4.14 update.
It is very worth to update the kernel.

bzyx
Posts: 3
Joined: Thu Feb 08, 2018 4:51 pm
languages_spoken: english, polish
ODROIDs: HC1
Contact:

Re: HC-1 HDD suddenly stopped being visible.

Unread post by bzyx » Wed Dec 26, 2018 7:39 pm

Hi, that's right OMV supports 4.14, I'm using Armbian and the OMV image from the "official" release images on Sourceforge. For some time I've used the 4.14.x series but I think there must be some bug, because the I/O on my SD card was very very slow, and the mmcqd process was using much CPU time. I'm using "Samsung EVO PLUS microSDXC" card, so I think it should be compatible with Samsung SoC ;)

User avatar
rooted
Posts: 6098
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Contact:

Re: HC-1 HDD suddenly stopped being visible.

Unread post by rooted » Thu Dec 27, 2018 9:50 am


bzyx wrote: I'm using "Samsung EVO PLUS microSDXC" card, so I think it should be compatible with Samsung SoC ;)
Don't be so sure, while most Samsung cards work great there have been instance/s where they didn't.

This being a Samsung SoC isn't very relevant because it's older than the SD card.

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 6 guests