Issue with OGST N64 LCD screen

[cainkirisgai]

Got a N64 OGST kit in and after setting up the colors on the screen were inverted. Sent it back and got a second one at first it seemed like it was a different issue but after trying again today its the same thing colors look inverted if i move the ribbon cable the image gets distorted and snowy.

[odroid]

Can you please unplug and plug the LCD FPC cable?
The black part in the FPCB connector should be pulled first carefully.
And, the white line on the FPCB must be placed near the connector edge something like this.

lcd_con.PNG (77.85 KiB) Viewed 958 times

Also reassemble the IDC 30pin flat cable between XU4 and LCD board.

[cainkirisgai]

reassemble it how? it is already assembled do you mean to just disconnect and reconnect it?

[odroid]

Yes.
I heard some extra particles in the connector could cause the malfunction of LCD display.

[cainkirisgai]

just disconnected both and reconnected and it still looks the same

[odroid]

Thank you for the test.

We've shipped over 1,500 console kits but you are the first person who has the LCD issue.
So I thought it could be a simple connection problem.
In that case, the 30pin IDC ribbon cable or XU4 itself could be a root cause since you already received a replacement.
Otherwise, it is very worth to reflash the OGST OS image and configure the LCD output again.

BTW, did you buy it from our web-store directly? or a distributor?

[cainkirisgai]

first one was from odroid on amazon the 2nd one was from the odroid site. I sent the whole unit back cables and all so I do not have the same cable as with the first set i had. I will try to flash the image again right now im checking with the updates just to make sure that I didnt miss with ap get update just to be sure if not i will possibly try a new odroid and if that one works i will see about a return on my current one

[cainkirisgai]

just finished reflashing the image and still the same result

[odroid]

We will contact you tomorrow to solve your issue.

Did you buy one from this odroid site?
https://odroidinc.com/
or, this?
https://www.hardkernel.com/main/shop/go ... hp?lang=en

[cainkirisgai]

It was from odroidinc.com

[cainkirisgai]

Were u talking about the odroid itself or the n64 kit the kit was from odroid.inc and the odroid was from Amazon

[odroid]

Well noted. I've forwarded your message to our sales team.
If you don't receive an email within 24 hours, let me know again.

[cainkirisgai]

so far i still didnt get any email

[odroid]

Sorry. Our sales people was off-line.
I sent you a PM.

[cainkirisgai]

thanks again for the help

[tairos]

Did you solve the problem? I have the exact same problem :/

[tobetter]

Did you solve the problem? I have the exact same problem :/

Do you mean your LCD is also inverted?

[W3G]

I had the same problem but I solved it by reinstalling the system

[W3G]

When install the system open a terminal and write: sudo apt update && sudo apt upgrade -y && sudo apt dist-upgrade. Restart the console and then install the LCD driver.