mount in larger case - drilling template

Moderators: mdrjr, odroid

mount in larger case - drilling template

Unread postby KC7NOA » Thu Jul 05, 2018 2:44 am

Is there a picture that can be printed to scale that could be used as a drilling template ...

i would like to wet the paper so that it will stick to the case and then use a center punch to make where the holes go ... then drill by hand .....

I use a micro pc case with the PS ... the 5v has been working quite well ...

and for my SDR endeavors the 12V@20A looks promising for a RF amplifier ....
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2

Re: mount in larger case - drilling template

Unread postby KC7NOA » Wed Jul 18, 2018 11:28 pm

Are there no dimentions for spacing of the holes for permanent mounting?
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2

Re: mount in larger case - drilling template

Unread postby odroid » Thu Jul 19, 2018 9:08 am

You can find a PCB mechanical drawings in Autocad format in this link.
https://www.hardkernel.com/main/product ... &tab_idx=2
User avatar
odroid
Site Admin
 
Posts: 28717
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: mount in larger case - drilling template

Unread postby KC7NOA » Thu Jul 19, 2018 11:55 pm

Ok ...

Wonder if Qcad is still in the Ubuntu repository for 18.04 ....

Ill get the dimensions one way or another !!!! lol
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2

Re: mount in larger case - drilling template

Unread postby KC7NOA » Fri Jul 20, 2018 8:34 am

Ill see if I can get a measurement with FreeCad
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2

Re: mount in larger case - drilling template

Unread postby odroid » Fri Jul 20, 2018 9:26 am

If you just need the location of four 3mm mounting holes, this one should be enough.
Image
C1+ and C2 mechanical dimensions are identical.
User avatar
odroid
Site Admin
 
Posts: 28717
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: mount in larger case - drilling template

Unread postby KC7NOA » Fri Jul 20, 2018 9:32 am

Perfect!!!!!

58MM by 49MM ... with a #3 hole ...
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2


Return to General Chat

Who is online

Users browsing this forum: No registered users and 5 guests