usb 3.0 emmc writer/reader module linux problem

Post Reply
kemal
Posts: 2
Joined: Tue May 22, 2018 7:28 pm
languages_spoken: english
ODROIDs: C2
Contact:

usb 3.0 emmc writer/reader module linux problem

Unread post by kemal » Tue May 22, 2018 7:37 pm

Hello Folks,
Recently I bought the "USB3.0 eMMC Module Writer".
But I am having trouble to use it on openSUSE Tumbleweed platform

With the eMMC or without the eMMC on the module, I got these system messages:


-----------------------------------------------------------------------
...
[ 1240.133133] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1240.161824] usb 4-2: New USB device found, idVendor=05e3, idProduct=0749
[ 1240.161833] usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 1240.161853] usb 4-2: Product: USB3.0 Flash Disk
[ 1240.161859] usb 4-2: Manufacturer: Generic
[ 1240.161864] usb 4-2: SerialNumber: 000000001538
[ 1240.163228] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 1240.163479] scsi host9: usb-storage 4-2:1.0
[ 1241.186471] scsi 9:0:0:0: Direct-Access Generic MassStorageClass 1538 PQ: 0 ANSI: 6
[ 1241.187018] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 1241.516972] sd 9:0:0:0: [sdd] Unit Not Ready
[ 1241.516980] sd 9:0:0:0: [sdd] Sense Key : Aborted Command [current]
[ 1241.516986] sd 9:0:0:0: [sdd] Add. Sense: Incompatible medium installed
[ 1241.848461] sd 9:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1241.848469] sd 9:0:0:0: [sdd] Sense Key : Aborted Command [current]
[ 1241.848475] sd 9:0:0:0: [sdd] Add. Sense: Incompatible medium installed
[ 1241.848485] sd 9:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
[ 1241.848489] sd 9:0:0:0: [sdd] 0-byte physical blocks
[ 1241.958905] sd 9:0:0:0: [sdd] Test WP failed, assume Write Enabled
[ 1242.069506] sd 9:0:0:0: [sdd] Asking for cache data failed
[ 1242.069519] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[ 1242.619434] sd 9:0:0:0: [sdd] Unit Not Ready
[ 1242.619436] sd 9:0:0:0: [sdd] Sense Key : Aborted Command [current]
[ 1242.619438] sd 9:0:0:0: [sdd] Add. Sense: Incompatible medium installed
[ 1242.729521] sd 9:0:0:0: ioctl_internal_command return code = 8000002
[ 1242.729529] sd 9:0:0:0: Sense Key : Aborted Command [current]
[ 1242.729534] sd 9:0:0:0: Add. Sense: Incompatible medium installed
[ 1243.280985] sd 9:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1243.280993] sd 9:0:0:0: [sdd] Sense Key : Aborted Command [current]
[ 1243.280999] sd 9:0:0:0: [sdd] Add. Sense: Incompatible medium installed
[ 1243.721340] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[ 1244.050970] sd 9:0:0:0: ioctl_internal_command return code = 8000002
[ 1244.050991] sd 9:0:0:0: Sense Key : Aborted Command [current]
[ 1244.050996] sd 9:0:0:0: Add. Sense: Incompatible medium installed
[ 1244.381167] sd 9:0:0:0: ioctl_internal_command return code = 8000002
[ 1244.381176] sd 9:0:0:0: Sense Key : Aborted Command [current]
[ 1244.381184] sd 9:0:0:0: Add. Sense: Incompatible medium installed
[ 1244.491499] sd 9:0:0:0: ioctl_internal_command return code = 8000002
...
-----------------------------------------------------------------------


any suggestion?

Thanks in advance.....

User avatar
rooted
Posts: 6096
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Contact:

Re: usb 3.0 emmc writer/reader module linux problem

Unread post by rooted » Wed May 23, 2018 12:11 am

Try a livecd of Ubuntu and see if you get the same error.

What color is the PCB of your eMMC?

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 0 guests