CoreELEC

Moderators: mdrjr, odroid, Raybuntu, wrxtasy

Re: CoreELEC

Unread postby Raybuntu » Sat Jun 09, 2018 3:19 am

There is something wrong with your storage. But I can't see the whole error
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby cdu13a » Sat Jun 09, 2018 4:41 am

I unplugged it and plugged it back in and it restarted seemingly without issue.

I'm going to restore the card(will try other cards as well) back to the state it was in before the upgrade, and try again with a serial console attached.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby Raybuntu » Sat Jun 09, 2018 5:05 am

Yeah observe it if it's a bug it seems like a rare one.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby Pienoet » Sat Jun 09, 2018 5:09 am

cdu13a wrote:Upgrade to CoreELEC 8.90.3 from CoreELEC 8.90.0 fails at Starting Journal Service.

P_20180608_134449.jpg


I have exactly the same on my odroid C2.
Upgrading from 8.90.2 to 8.90.3.

Only thing thas was possible was flashing 8.90.3 on emmc then restore backup.
After that netflix is crashing soon as i open netflix.
Then i rebooted THE system and after that THE same issue on boot screen again.
Installed 8.90.2 and everyyhing is running fine.

I think something is really wrong with this build on odroid C2.

@ raybuntu did you test this on your odroid c2??
Pienoet
 
Posts: 385
Joined: Sun May 10, 2015 10:04 pm
languages_spoken: english Dutch

Re: CoreELEC

Unread postby cdu13a » Sat Jun 09, 2018 5:50 am

It keeps doing it, somewhat randomly.

I've not taken a close look at it yet but here is what I get from the serial console https://pastebin.com/qDF66zZa

Also unrelated I found that if you try to play a game and then try to watch any video, it will tell you it can't find the emulator.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby cdu13a » Sun Jun 10, 2018 2:09 pm

Has anyone else noticed that their C2 runs a lot hotter when using 8.90.3 compared to previous releases?

I've gone from about 48c at idle to 70c at idle. This is on two different C2.

It looks like kodi might be part of the cause since it is sitting around 50% cpu usage now when on previous version it was at around 16% when doing nothing with the screen off.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby rooted » Sun Jun 10, 2018 2:44 pm

Try disabling the screen saver.
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby cdu13a » Mon Jun 11, 2018 3:14 am

Doesn't make a difference.

I have two identically configured C2 both fresh installs of 8.90.3 with largish libraries, about a foot apart. One screensaver set to dim(same as I had on 8.90.0) one with screen saver turned off. Both are at 70c right now. Both show about the same usage. I don't know the room temp, but I have a third C2 running it's original 8.90.0 about a foot over from the two that are running the newer version that is at 46c.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby rooted » Mon Jun 11, 2018 3:34 am

Kodi using that much CPU is a big part of the issue, question is why is it doing that.

Have you tried a fresh install, no add-ons? Narrow it down a bit further.

Is the governor set to performance or ondemand?
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby cdu13a » Mon Jun 11, 2018 3:51 am

In the process of prepping new cards right now.

Plan is fresh install, with nothing more then setup wizard run.
Then walk through the setup step by step with a 30 minute break between steps, until I get a spike.

However, add-on wise everything comes from the default repos, and it's pretty much youtube, vimeo, yahoo weather, and studio icons.
So nothing crazy there.

*edit*

governor is set ondemand

*edit*

I pretty much leave CoreELEC as it comes. So have not gone changing much, it's local database, no advanced settings or anything under the hood modified.
Normally I have one C2 running it, mostly just as a way to see what is happening with other peoples builds, and as a reference to my own builds.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby cdu13a » Mon Jun 11, 2018 6:30 am

Fresh install, no configuration, no library, and it's 66c.

Part way through testing, I realized the cause might have been staring me in the face on the release notes page this whole time. They changed the default for algorithmdirtyregions, and it took my brain multiple days and multiple readings to clue in that dirtyregions under fixes in the release notes meant the dirty-region processing algorithm for the gui and not something to do with dvd/blueray/etc.. region encoding.

change the setting, and temps back to normal.

and, I think I'm done with technology for the day, since my brain is clearly not up to it right now.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby rooted » Mon Jun 11, 2018 9:28 am

Dirty regions strikes again. Glad you got it resolved.
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby zaphod24 » Tue Jun 12, 2018 8:23 am

Is it possible/advisable to overclock the C2 CPU with 8.90.3? I tried changing
setenv max_freq "1536"

to

setenv max_freq "1752"

but the max cpu frequency didn't change after rebooting
zaphod24
 
Posts: 14
Joined: Thu Dec 29, 2016 5:12 am
languages_spoken: english
ODROIDs: C2

Re: CoreELEC

Unread postby jesusrp » Sun Jun 17, 2018 9:08 pm

while updating CoreElec to new version, Is there a way to prevent partition renaming?

I have an emmc with Android, ubuntu and CoreElec.
Everytime I update CoreElec it breaks it all due to partition renaming it does.

Thank you.
jesusrp
 
Posts: 96
Joined: Mon May 02, 2016 9:55 pm
languages_spoken: english

Re: CoreELEC

Unread postby soerenderfor » Sun Jun 17, 2018 10:06 pm

Hey.

The temp problem and CPU usage in 'CoreELEC' is about dirtyregions. And the Netflix should be updated to a newer version, the it will run normal.
dirtyregions. ( You can change algorithmdirtyregions in /storage/.kodi/userdata/advancedsettings.xml value to 3 )
soerenderfor
 
Posts: 4
Joined: Sun Jun 17, 2018 10:01 pm
languages_spoken: english

Re: CoreELEC

Unread postby plikmuny » Thu Jun 28, 2018 5:37 pm

I am having the Video stuttering issues with the latest build of Coreelec. it is very annoying,
Is there a solution yet? i have checked it in Default Settings as well as by overclocking with RAM and GPU Overclock also. But no use. GUI and responsiveness is faster. but the Video Stuttering at the Beginning and also in between is there.
I need a solution for this pls.
plikmuny
 
Posts: 42
Joined: Tue Feb 06, 2018 3:26 am
languages_spoken: english
ODROIDs: Odroid C2

Re: CoreELEC

Unread postby plikmuny » Thu Jun 28, 2018 5:38 pm

jesusrp wrote:while updating CoreElec to new version, Is there a way to prevent partition renaming?

I have an emmc with Android, ubuntu and CoreElec.
Everytime I update CoreElec it breaks it all due to partition renaming it does.

Thank you.

How did you install the 3 in 1 OS onto eMMC? can you write a simple Guide pls.
plikmuny
 
Posts: 42
Joined: Tue Feb 06, 2018 3:26 am
languages_spoken: english
ODROIDs: Odroid C2

Re: CoreELEC

Unread postby jesusrp » Thu Jun 28, 2018 5:44 pm

plikmuny wrote:
jesusrp wrote:while updating CoreElec to new version, Is there a way to prevent partition renaming?

I have an emmc with Android, ubuntu and CoreElec.
Everytime I update CoreElec it breaks it all due to partition renaming it does.

Thank you.

How did you install the 3 in 1 OS onto eMMC? can you write a simple Guide pls.


https://forum.odroid.com/viewtopic.php?f=136&t=22362
jesusrp
 
Posts: 96
Joined: Mon May 02, 2016 9:55 pm
languages_spoken: english

Re: CoreELEC

Unread postby rooted » Fri Jun 29, 2018 8:15 am

plikmuny wrote:I am having the Video stuttering issues with the latest build of Coreelec. it is very annoying,
Is there a solution yet? i have checked it in Default Settings as well as by overclocking with RAM and GPU Overclock also. But no use. GUI and responsiveness is faster. but the Video Stuttering at the Beginning and also in between is there.
I need a solution for this pls.
What build specifically?
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby cy1clown » Tue Jul 03, 2018 11:45 pm

I am running CoreELEC 8.90.4 and am having problems with the HDHomerun PVR. When I first installed the PVR client it worked fine, after the update to 8.90.4 it is showing as incompatible. Can anyone help with this? Is there an alternate PVR I can use that is compatible with this build?

Thanks
Jon
cy1clown
 
Posts: 122
Joined: Sat Dec 28, 2013 6:38 am
languages_spoken: English
ODROIDs: U3
XU4
C2

Re: CoreELEC

Unread postby startv » Thu Jul 05, 2018 8:03 pm

rooted wrote:
plikmuny wrote:I am having the Video stuttering issues with the latest build of Coreelec. it is very annoying,
Is there a solution yet? i have checked it in Default Settings as well as by overclocking with RAM and GPU Overclock also. But no use. GUI and responsiveness is faster. but the Video Stuttering at the Beginning and also in between is there.
I need a solution for this pls.
What build specifically?

I met the same issue, 8.90.3and 8.90.4, when the subtitle showing, the video stutters a frame, disable subtitle, no.such stutter
startv
 
Posts: 19
Joined: Thu Jan 05, 2017 10:30 am
languages_spoken: english
ODROIDs: C2

Re: CoreELEC

Unread postby Pienoet » Fri Jul 06, 2018 2:34 am

maybe you need dirtyregion in your advancedsettings.xml
Pienoet
 
Posts: 385
Joined: Sun May 10, 2015 10:04 pm
languages_spoken: english Dutch

Re: CoreELEC

Unread postby startv » Fri Jul 06, 2018 3:22 pm

Pienoet wrote:maybe you need dirtyregion in your advancedsettings.xml

I tried,but no working.
startv
 
Posts: 19
Joined: Thu Jan 05, 2017 10:30 am
languages_spoken: english
ODROIDs: C2

Re: CoreELEC

Unread postby Temmy » Sat Jul 07, 2018 2:09 am

I am use DVB-T2 - T230C2 (0572:C68A). TVHeadend with Tvheadend HTSP Client it working fine. Scan, watch tv is ok.

Issues is when want switch on the other channel, after watching tv 10 - 20+ min (I dont remember if issues is only for channel any mux or same mux too).
Tvheadend server is "stop". On websetting (Status Tab - Stream) i see still restart mux.

Tvheadend HTSP Client reports "no signal"

Helps is restart TVH server with client (occasionally) or restart ColeELEC (I must restart sometimes twice)

Issues is 8.90.2 - 8.90.4 (8.90.1 - I do not know)
Temmy
 
Posts: 10
Joined: Thu Apr 05, 2018 4:49 pm
languages_spoken: english, czech
ODROIDs: C2

Re: CoreELEC

Unread postby rooted » Sat Jul 07, 2018 5:39 am

What version of tvheadend?
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby Temmy » Sat Jul 07, 2018 6:20 am

server - 4.2.6-7 (9.0.116)
client - 4.3.0.4
both from CoreELEC repo addon
Temmy
 
Posts: 10
Joined: Thu Apr 05, 2018 4:49 pm
languages_spoken: english, czech
ODROIDs: C2

Re: CoreELEC

Unread postby rooted » Sat Jul 07, 2018 7:13 am

So you are running server and client on the same device?
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby Temmy » Sat Jul 07, 2018 3:06 pm

Yes, on the C2.
Temmy
 
Posts: 10
Joined: Thu Apr 05, 2018 4:49 pm
languages_spoken: english, czech
ODROIDs: C2

Re: CoreELEC

Unread postby Temmy » Sun Jul 08, 2018 12:51 am

Temmy
 
Posts: 10
Joined: Thu Apr 05, 2018 4:49 pm
languages_spoken: english, czech
ODROIDs: C2

Re: CoreELEC

Unread postby rooted » Sun Jul 08, 2018 2:20 am

I have been having a similar issue with tvheadend for a couple of years, but my issue is due to signal dropout of OTA (Antenna [Over The Air]) programming.

I'm not familiar with DVBT2, is it OTA?
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby Temmy » Sun Jul 08, 2018 3:13 am

Yes, OTA (T - Terrestrial, C - cable) Its "simplified" DVBT with HEVC codec (central europe)

Any recommended replacement of TVHeadned? (server + client)
Temmy
 
Posts: 10
Joined: Thu Apr 05, 2018 4:49 pm
languages_spoken: english, czech
ODROIDs: C2

Re: CoreELEC

Unread postby rooted » Sun Jul 08, 2018 3:34 am

There is VDR which is what some Kodi developers swear by, it certainly handles glitches in the stream more gracefully.

I'm not sure if there is a LE plug in for the server, there is a client plug in.

VDR

http://www.tvdr.de/software.htm
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby plikmuny » Sun Jul 08, 2018 4:47 am

rooted wrote:
plikmuny wrote:I am having the Video stuttering issues with the latest build of Coreelec. it is very annoying,
Is there a solution yet? i have checked it in Default Settings as well as by overclocking with RAM and GPU Overclock also. But no use. GUI and responsiveness is faster. but the Video Stuttering at the Beginning and also in between is there.
I need a solution for this pls.
What build specifically?

8.9.0.3, 8.9.0.4 and also 8.2.4.2 C2 version. All have the sync problem. And the Video hangs also. Unless I do pause and press play again, it won't play at all. Sometimes the video just ends playing eventhough it is not fully played till the end.

This was not the case with previous versions of kodi 17 series. But kodi 18 is troubling. I don't know if it's really this version or the kernel or some patches.... Its really irritating....
plikmuny
 
Posts: 42
Joined: Tue Feb 06, 2018 3:26 am
languages_spoken: english
ODROIDs: Odroid C2

Re: CoreELEC

Unread postby rooted » Sun Jul 08, 2018 5:14 am

plikmuny wrote:
rooted wrote:
plikmuny wrote:I am having the Video stuttering issues with the latest build of Coreelec. it is very annoying,
Is there a solution yet? i have checked it in Default Settings as well as by overclocking with RAM and GPU Overclock also. But no use. GUI and responsiveness is faster. but the Video Stuttering at the Beginning and also in between is there.
I need a solution for this pls.
What build specifically?

8.9.0.3, 8.9.0.4 and also 8.2.4.2 C2 version. All have the sync problem. And the Video hangs also. Unless I do pause and press play again, it won't play at all. Sometimes the video just ends playing eventhough it is not fully played till the end.

This was not the case with previous versions of kodi 17 series. But kodi 18 is troubling. I don't know if it's really this version or the kernel or some patches.... Its really irritating....


I agree, so far Kodi 18 has been worse on all platforms AFAIK except perhaps PC where you wouldn't notice it.

What I do is find a build that works best and stick with it until my plug-ins no longer work due to api changes.
User avatar
rooted
 
Posts: 5680
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby mancer » Fri Jul 27, 2018 6:18 pm

I'm having random issues with CoreELEC (and also with LibreELEC) where video playback is stopped, the screen stays black for about 30 seconds and then I get thrown back to the Kodi menu.
The log file doesn't really help as it basically only states "Connection lost".
This happens randomly - sometimes it doesn't happen at all, sometimes it does happen every 5-10 minutes.
The Odroid as well as the NAS with the media on it is connected to the router.
I already tried the following:
* switch LAN cable to Odroid
* switch LAN cable to NAS
* switch router(!)
* switch SD card

Right now I'm wondering if it might be a temperature issue. I'm using a transparent case with some air openings on top. The room temperature while watching is around 29°C at the moment, after Kodi stopped playback it says its temperature is between 60°C and 66°C - what is your Odroids temperature when running FullHD or 4K?
mancer
 
Posts: 14
Joined: Fri Jan 27, 2017 8:05 pm
languages_spoken: english, german
ODROIDs: C2

Re: CoreELEC

Unread postby odroid » Fri Jul 27, 2018 6:38 pm

You might need to remove J8 jumper to lower the temperature if you use the DC barrel for the power input path.
https://wiki.odroid.com/odroid-c2/hardw ... wer_enable
Anyway, 60°C seems to be normal when a 4K video is playing.

How was the C2 blue LED status when you met the "Connection Lost"?
User avatar
odroid
Site Admin
 
Posts: 28855
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: CoreELEC

Unread postby mancer » Sat Jul 28, 2018 4:13 pm

I'm using MicroUSB as power supply. Don't know about the blue LED, will have to check the next time this happens.
Here's an excerpt from the log files between video start and video end:
Code: Select all
22:41:53.764 T:3104826224  NOTICE: Creating InputStream
22:41:53.886 T:3104826224  NOTICE: Creating Demuxer
22:41:54.347 T:3104826224  NOTICE: Opening stream: 0 source: 256
22:41:54.347 T:3104826224  NOTICE: CVideoPlayerVideo::OpenStream - Creating codec: 173
22:41:54.350 T:3104826224  NOTICE: Creating video thread
22:41:54.350 T:3126850416  NOTICE: running thread: video_thread
22:41:54.351 T:3104826224  NOTICE: Opening stream: 1 source: 256
22:41:54.351 T:3104826224  NOTICE: Finding audio codec for: 86019
22:41:54.351 T:3104826224  NOTICE: Creating audio thread
22:41:54.351 T:3018126192  NOTICE: running thread: CVideoPlayerAudio::Process()
22:41:54.351 T:3104826224  NOTICE: Opening stream: 4 source: 256
22:41:54.519 T:3126850416  NOTICE: CAMLCodec::OpenDecoder - using V4L2 pts format: 64Bit
22:41:55.454 T:3018126192  NOTICE: Creating audio stream (codec id: 86019, channels: 6, sample rate: 48000, pass-through)
22:41:55.520 T:4072846192 WARNING: ActiveAE - large audio sync error: 5297.489709
22:41:55.520 T:4072846192 WARNING: ActiveAE - large audio sync error: 5297.490000
22:41:55.520 T:4072846192 WARNING: ActiveAE - large audio sync error: 5297.490209
22:41:55.520 T:4072846192 WARNING: ActiveAE - large audio sync error: 5297.490126
22:41:55.520 T:4072846192 WARNING: ActiveAE - large audio sync error: 5297.490292
22:41:55.520 T:4072846192 WARNING: ActiveAE - large audio sync error: 5297.490250
22:41:55.537 T:4095102992  NOTICE: Display resolution ADJUST : 1920x1080 @ 23.98 - Full Screen (32) (weight: 0.000)
22:41:55.560 T:4072846192 WARNING: ActiveAE - large audio sync error: 5265.464792
22:41:55.560 T:4072846192 WARNING: ActiveAE - large audio sync error: 5265.464917
22:41:55.987 T:4095102992  NOTICE: VideoPlayer: OnLostDisplay received
22:41:57.390 T:3018126192   ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
22:41:58.574 T:4095102992  NOTICE: VideoPlayer: OnResetDisplay received
22:41:58.609 T:4072846192 WARNING: ActiveAE - large audio sync error: 5511.106058
22:41:58.609 T:4072846192 WARNING: ActiveAE - large audio sync error: 5223.511558
22:41:58.609 T:4072846192 WARNING: ActiveAE - large audio sync error: 5191.874016
22:41:58.610 T:4072846192 WARNING: ActiveAE - large audio sync error: 5159.880766
22:41:58.610 T:4072846192 WARNING: ActiveAE - large audio sync error: 5127.880932
22:41:58.610 T:4072846192 WARNING: ActiveAE - large audio sync error: 5095.880807
22:41:58.610 T:4072846192 WARNING: ActiveAE - large audio sync error: 5063.880766
22:41:58.610 T:4072846192 WARNING: ActiveAE - large audio sync error: 5031.880724
22:42:00.418 T:3018126192   ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
22:42:54.469 T:3594396528   ERROR: Previous line repeats 1 times.
22:42:54.470 T:3594396528  NOTICE: ES: Client  from ::ffff:192.168.178.23 timed out
22:45:11.608 T:3018126192  NOTICE: CVideoPlayerAudio::Process - stream stalled pts:1788.832 clock:1788.916
22:45:32.885 T:3104826224   ERROR: Read - Error( -1, 110, Connection timed out )
22:45:32.889 T:4072846192 WARNING: ActiveAE - large audio sync error: -21706.569130
22:45:32.890 T:3104826224  NOTICE: CVideoPlayer::OnExit()
22:45:32.891 T:3104826224  NOTICE: VideoPlayer: eof, waiting for queues to empty
22:45:32.893 T:3104826224  NOTICE: Closing stream player 1
22:45:32.894 T:3104826224  NOTICE: CDVDMessageQueue(audio)::WaitUntilEmpty
22:45:32.895 T:3104826224  NOTICE: Waiting for audio thread to exit
22:45:32.895 T:3018126192   ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
22:45:32.896 T:3018126192  NOTICE: thread end: CVideoPlayerAudio::OnExit()
22:45:32.896 T:3104826224  NOTICE: Closing audio device
22:45:32.974 T:3104826224  NOTICE: Deleting audio codec
22:45:32.974 T:3104826224  NOTICE: Closing stream player 2
22:45:32.974 T:3104826224  NOTICE: CDVDMessageQueue(video)::WaitUntilEmpty
22:45:33.128 T:3126850416   ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
22:45:33.128 T:3126850416  NOTICE: thread end: video_thread
22:45:33.129 T:3104826224  NOTICE: waiting for video thread to exit
22:45:33.129 T:3104826224  NOTICE: deleting video codec
22:45:33.233 T:3104826224  NOTICE: Closing stream player 3
22:46:33.283 T:4095102992  NOTICE: CVideoPlayer::CloseFile()
22:46:33.283 T:4095102992  NOTICE: VideoPlayer: waiting for threads to exit
22:46:33.283 T:4095102992  NOTICE: VideoPlayer: finished waiting
22:46:33.283 T:4095102992  NOTICE: CVideoPlayer::CloseFile()
22:46:33.283 T:4095102992  NOTICE: VideoPlayer: waiting for threads to exit
22:46:33.283 T:4095102992  NOTICE: VideoPlayer: finished waiting

I did some research on the "CVideoPlayerAudio::Process - stream stalled", but didn't come up with anything helpful.
I'm also not sure about the "WARNING: ActiveAE - large audio sync error"... this happened with Dolby 5.1 as well as with Dolby Atmos (can't tell about dts right now).
Device .23 is my phone with the Yatse app.
Anything suspicious?

Edit: Just found this -> https://discourse.coreelec.org/t/solved ... alled/1071 trying it out now...

Edit 2: This seems to have done the trick!
mancer
 
Posts: 14
Joined: Fri Jan 27, 2017 8:05 pm
languages_spoken: english, german
ODROIDs: C2

Re: CoreELEC

Unread postby mancer » Mon Aug 06, 2018 4:51 am

Unfortunately, it did not work. The whole week I had no issues, but today it started again... couldn't watch one minute.
The blue light kept blinking happy as ever.
Code: Select all
21:26:03.328 T:3143132016  NOTICE: Creating InputStream
21:26:03.355 T:3143132016  NOTICE: Creating Demuxer
21:26:03.799 T:3143132016  NOTICE: Opening stream: 0 source: 256
21:26:03.800 T:3143132016  NOTICE: CVideoPlayerVideo::OpenStream - Creating codec: 173
21:26:03.800 T:3143132016  NOTICE: Creating video thread
21:26:03.801 T:3134739312  NOTICE: running thread: video_thread
21:26:03.802 T:3143132016  NOTICE: Opening stream: 2 source: 256
21:26:03.802 T:3143132016  NOTICE: Finding audio codec for: 86060
21:26:03.802 T:3143132016  NOTICE: Creating audio thread
21:26:03.802 T:3258970992  NOTICE: running thread: CVideoPlayerAudio::Process()
21:26:03.802 T:3143132016  NOTICE: Opening stream: 4 source: 256
21:26:03.814 T:3258970992  NOTICE: Creating audio stream (codec id: 86060, channels: 8, sample rate: 48000, pass-through)
21:26:03.817 T:3258970992   ERROR: CAEStreamInfo::GetDuration - invalid stream type
21:26:03.869 T:3134739312   ERROR: Previous line repeats 1 times.
21:26:03.869 T:3134739312  NOTICE: CAMLCodec::OpenDecoder - using V4L2 pts format: 64Bit
21:26:04.298 T:4089561104  NOTICE: Display resolution ADJUST : 1920x1080 @ 23.98 - Full Screen (32) (weight: 0.000)
21:26:04.481 T:4089561104  NOTICE: VideoPlayer: OnLostDisplay received
21:26:07.316 T:4089561104  NOTICE: VideoPlayer: OnResetDisplay received
21:26:57.687 T:3258970992  NOTICE: CVideoPlayerAudio::Process - stream stalled pts:46.959 clock:49.270
21:27:04.196 T:3641869168  NOTICE: ES: Client  from ::ffff:192.168.178.23 timed out
21:27:17.214 T:3143132016   ERROR: Read - Error( -1, 110, Connection timed out )
21:27:17.216 T:3143132016  NOTICE: CVideoPlayer::OnExit()
21:27:17.216 T:3143132016  NOTICE: VideoPlayer: eof, waiting for queues to empty
21:27:17.217 T:3143132016  NOTICE: Closing stream player 1
21:27:17.218 T:3143132016  NOTICE: CDVDMessageQueue(audio)::WaitUntilEmpty
21:27:17.218 T:3258970992   ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
21:27:17.219 T:3258970992  NOTICE: thread end: CVideoPlayerAudio::OnExit()
21:27:17.220 T:3143132016  NOTICE: Waiting for audio thread to exit
21:27:17.221 T:3143132016  NOTICE: Closing audio device
21:27:17.232 T:3143132016  NOTICE: Deleting audio codec
21:27:17.232 T:3143132016  NOTICE: Closing stream player 2
21:27:17.232 T:3143132016  NOTICE: CDVDMessageQueue(video)::WaitUntilEmpty
21:27:17.456 T:3143132016  NOTICE: waiting for video thread to exit
21:27:17.457 T:3134739312   ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true
21:27:17.457 T:3134739312  NOTICE: thread end: video_thread
21:27:17.458 T:3143132016  NOTICE: deleting video codec
21:27:17.535 T:3143132016  NOTICE: Closing stream player 3
21:27:38.352 T:4089561104  NOTICE: CVideoPlayer::CloseFile()
21:27:38.352 T:4089561104  NOTICE: VideoPlayer: waiting for threads to exit
21:27:38.352 T:4089561104  NOTICE: VideoPlayer: finished waiting
21:27:38.352 T:4089561104  NOTICE: CVideoPlayer::CloseFile()
21:27:38.352 T:4089561104  NOTICE: VideoPlayer: waiting for threads to exit
21:27:38.352 T:4089561104  NOTICE: VideoPlayer: finished waiting


In 09_journal-cur.log I find the following at the time the "Read - Error( -1, 110, Connection timed out )" is thrown:
Code: Select all
Aug 05 21:26:16 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:26:26 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:26:36 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:26:46 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:26:56 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:27:06 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:27:16 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: aiu 958 playback disable
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: aml_hw_iec958_init,runtime->rate=192000, runtime->channels=8, same source mode(0)
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: set 4x audio clk for 958
Aug 05 21:27:17 Wohnzimmer kernel: aml_audio_hw: IEC958 16bit
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify rate 192000
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify size 16
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: no update
Aug 05 21:27:17 Wohnzimmer kernel: audio_dsp: buf=0
Aug 05 21:27:17 Wohnzimmer kernel: audio_dsp: IEC958_mode_raw=0
Aug 05 21:27:17 Wohnzimmer kernel: audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
Aug 05 21:27:17 Wohnzimmer kernel: audio_dsp: last mode 7,now 0
Aug 05 21:27:17 Wohnzimmer kodi.sh[2666]: [codec_close_cntl]video codec close return=0!
Aug 05 21:27:17 Wohnzimmer kernel: codec:DisableVideoLayer()
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: share the same clock
Aug 05 21:27:17 Wohnzimmer kernel: aml_audio_hw: IEC958 PCM32
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify rate 44100
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify size 32
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify format CT_PCM
Aug 05 21:27:17 Wohnzimmer kernel: hdmtix: set audio
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx tx_aud_src = 0
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: fs = 2, cd = 4, tmds_clk = 74176
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx aud_n_para = 17836
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx set channel status
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: Audio Type: PCM
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: set audio param
Aug 05 21:27:17 Wohnzimmer kernel: aml_snd_m8_card aml_m8_snd.41: i2s/958 same source
Aug 05 21:27:17 Wohnzimmer kernel: aml_snd_card: audio speaker on
Aug 05 21:27:17 Wohnzimmer kernel: DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
Aug 05 21:27:17 Wohnzimmer kernel: di_receiver_event_fun: vf_notify_receiver unreg
Aug 05 21:27:17 Wohnzimmer kernel: DI: di_unreg_process unreg start 1.
Aug 05 21:27:17 Wohnzimmer kernel: codec:DisableVideoLayer()
Aug 05 21:27:17 Wohnzimmer kernel: codec:disbled keep video before free keep buffer.
Aug 05 21:27:17 Wohnzimmer kernel: codec:disbled video for next before free keep buffer!
Aug 05 21:27:17 Wohnzimmer kernel: codec:DisableVideoLayer()
Aug 05 21:27:17 Wohnzimmer kernel: codec:free_alloced_keep_buffer           (null).          (null).          (null)
Aug 05 21:27:17 Wohnzimmer kernel: codec:free_alloced_keep_buffer           (null).          (null).          (null)
Aug 05 21:27:17 Wohnzimmer kernel: [tsync_avevent]event:2, param 0
Aug 05 21:27:17 Wohnzimmer kernel: codec:video first pts = 0
Aug 05 21:27:17 Wohnzimmer kernel: DI: di_unreg_process vf unreg cost 0 ms.
Aug 05 21:27:17 Wohnzimmer kernel: DI: di_unreg_process unreg stop 0.
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
Aug 05 21:27:17 Wohnzimmer kernel: aml_spdif_dai: share the same clock
Aug 05 21:27:17 Wohnzimmer kernel: aml_audio_hw: IEC958 PCM32
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify rate 44100
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: aout notify size 32
Aug 05 21:27:17 Wohnzimmer kernel: hdmitx: audio: no update
Aug 05 21:27:17 Wohnzimmer kernel: aml_snd_m8_card aml_m8_snd.41: i2s/958 same source
Aug 05 21:27:17 Wohnzimmer kernel: channel count should be 8, we got 2 aborting
Aug 05 21:27:17 Wohnzimmer kernel: [0]uninit list
Aug 05 21:27:17 Wohnzimmer kernel: codec:VsyncDisableVideoLayer
Aug 05 21:27:17 Wohnzimmer kernel: codec:AFBC off now.
Aug 05 21:27:17 Wohnzimmer kernel: codec:hevc video changed to 0 x 0 0 fps clk->200MHZ
Aug 05 21:27:17 Wohnzimmer kernel: codec:video_disable_store(1)
Aug 05 21:27:17 Wohnzimmer kernel: codec:DisableVideoLayer()
Aug 05 21:27:17 Wohnzimmer kernel: codec:free_alloced_keep_buffer           (null).          (null).          (null)
Aug 05 21:27:17 Wohnzimmer kernel: vfm_map_store:rm default
Aug 05 21:27:17 Wohnzimmer kernel: vfm_map_store:add default  decoder ppmgr deinterlace amvideo
Aug 05 21:27:17 Wohnzimmer kernel: codec:VsyncDisableVideoLayer
Aug 05 21:27:17 Wohnzimmer kernel: codec:AFBC off now.
Aug 05 21:27:22 Wohnzimmer kernel: aml_snd_card: audio speaker off
Aug 05 21:27:26 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Aug 05 21:27:36 Wohnzimmer pulseaudio[2484]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused


Any ideas are highly appreciated.
mancer
 
Posts: 14
Joined: Fri Jan 27, 2017 8:05 pm
languages_spoken: english, german
ODROIDs: C2

Re: CoreELEC

Unread postby cdu13a » Tue Aug 07, 2018 3:46 am

In case anybody hasn't noticed there was a new release of CoreELEC 8.95.0 https://github.com/CoreELEC/CoreELEC/releases

It's much improved over previous alpha releases.

Edit:

For anybody new to it. CoreELEC-Odroid_C2.arm-8.95.0.img.gz is the file you want for a fresh install on a C2
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby mancer » Sat Aug 18, 2018 7:06 pm

The latest version did not fix my problem. I still get the "stream stalled" followed by "Read - Error" and playback stop.
Do you think the C2 can be the cause of this issue?
mancer
 
Posts: 14
Joined: Fri Jan 27, 2017 8:05 pm
languages_spoken: english, german
ODROIDs: C2

Re: CoreELEC

Unread postby crazyquark » Sat Sep 15, 2018 4:19 pm

Latest build was really unstable on my C2, Kodi kept crashing.
It worked better on an sd card install instead of eMMC. However, the Emby plugin could not finish syncing to my server because of all the hang ups so for now I gave up on it.
I tried both the 8.95.0 version and the 8.95.2 one.
crazyquark
 
Posts: 280
Joined: Thu Jan 15, 2015 4:22 pm
languages_spoken: english, french, romanian
ODROIDs: C1,C1+,C2,HC1,XU4

Re: CoreELEC

Unread postby cdu13a » Sun Sep 16, 2018 1:29 am

Try re-downloading the 8.95.2 release. The initial upload of that release had problems, and was replaced.

If you try again log files would be helpful. (Use pastebin for the logs and provide a link to them instead of directly posting the logs to the forum.)
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby crazyquark » Sun Sep 16, 2018 3:57 am

Ok, thanks, I’ll give it a shot and post some logs

LE:
Indeed, the re-uploaded image for 8.95.2 works - I had to use the beta emby addon as the stable one had missing deps.
The first sync crashed midway but restarting Kodi helped.
I installed the Netflix addon but playback is unwatchable unfortunately.
I'll keep testing!

Does it matter if I install on an eMMC module or an SD card? I used an SD card this time around.
crazyquark
 
Posts: 280
Joined: Thu Jan 15, 2015 4:22 pm
languages_spoken: english, french, romanian
ODROIDs: C1,C1+,C2,HC1,XU4

Re: CoreELEC

Unread postby crazyquark » Sun Sep 16, 2018 4:01 pm

Sadly, the CEC plugin crashes my Kodi, I really need CEC. I think that's what I was also experiencing before.
I used the keyboard to navigate after my latest install but when I switched to the remote Kodi started crashing.

Here are some logs:
https://pastebin.com/daSWq35a
https://pastebin.com/79QW6Jp3

I think this is my problem:
https://discourse.coreelec.org/t/lepotato-crashes-when-navigating-menu-via-cec/592/3
The down key sends poweroff signal. I am unable to stop it; I disabled lircd and eventlircd - same problem. Really annoying.

OK, blacklisting meson_ir seems to do the trick.
How can I remove the remote control configs?
crazyquark
 
Posts: 280
Joined: Thu Jan 15, 2015 4:22 pm
languages_spoken: english, french, romanian
ODROIDs: C1,C1+,C2,HC1,XU4

Re: CoreELEC

Unread postby cdu13a » Mon Sep 17, 2018 2:52 am

If you make a blank rc_maps.cfg (just rename rc_maps.cfg.sample) in /storage/.config/ you will stop the ir remote control key maps from loading.

edit:
If you know which keymap is causing the conflict you can just replace it with a blank or edited file in /storage/.config/rc_keymaps, since anything placed there will override the defaults. The only difference in keymaps between LibreELEC and CoreELEC that I'm aware of is that libreelec_multi(/usr/lib/udev/rc_keymaps/libreelec_multi) contains extra remotes for other s905 based devices on CoreELEC. So creating a blank libreelec_multi file in /storage/.config/rc_keymaps or copying /usr/lib/udev/rc_keymaps/libreelec_multi there and editing out the extra remotes might be a better option.
cdu13a
 
Posts: 64
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: CoreELEC

Unread postby dexx » Tue Oct 02, 2018 8:03 pm

Does CoreElec support mapping SMB version 2 or 3 shares? Or is it restricted to version 1 like many other Linux based platforms?
dexx
 
Posts: 10
Joined: Wed Aug 24, 2016 3:56 pm
languages_spoken: english

Previous

Return to LibreELEC - Kodi Project for C1/C2

Who is online

Users browsing this forum: No registered users and 1 guest