CoreELEC

Moderators: odroid, mdrjr, wrxtasy, Raybuntu

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby lexxa » Tue Apr 03, 2018 7:08 pm

oledb0815 wrote:Hi,
need help, after month of enjoying the builds I would like to change the disk, back to emmc.
But I can't do an update of LE 8.2.4 from tar anymore from /.update. I put the tar file in, nothing happens...
Do we have any previous images from where I can do the update to rb-leia24 again?

Thanks
Olli

for german speakers:
https://www.kodinerds.net/index.php/Thr ... pageNo=145


If i correctly understand what you need to do the simple answer is yes.
Just go to Raybuntu's github page, download rb-leia24 img, burn it on the eMMC and boot from it. Once the initial scripts are done it is just a matter of copying /storage/.kodi and /storage/.config from the old to the new drive (preferably with kodi off; systemctl stop kodi). After the reboot you should be ok.
This is a quick and dirty method but should work for the majority of cases.
lexxa
 
Posts: 11
Joined: Thu Apr 21, 2016 4:00 pm
languages_spoken: english
ODROIDs: ODROID-C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby plikmuny » Thu Apr 05, 2018 6:35 am

Is there a new build available for c2? I see lot of development /improvement going on on other devises. But for c2 it is like stagnant from the past many days....
Is there a new build coming out soon with latest patches and updated Kernel?
plikmuny
 
Posts: 36
Joined: Tue Feb 06, 2018 3:26 am
languages_spoken: english
ODROIDs: Odroid C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby rooted » Thu Apr 05, 2018 12:40 pm

plikmuny wrote:Is there a new build available for c2? I see lot of development /improvement going on on other devises. But for c2 it is like stagnant from the past many days....
Is there a new build coming out soon with latest patches and updated Kernel?
http://releases.libreelec.tv/LibreELEC-Odroid_C2.aarch64-8.2.4.img.gz?mirrorlist
User avatar
rooted
 
Posts: 4914
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby nqdrizzt » Thu Apr 05, 2018 2:36 pm

nqdrizzt wrote:First of all i would like to say thank you for the great work Raybuntu !!

Yesterday I installed the latest alpha version of your image and discovered some issues running it on my odroid c2:

Code: Select all
LibreELEC (Raybuntu): rb-leia24 (Odroid_C2.arm)


1) Sound of video playback does not work properly, if audio passthrough is enabled.
I have an external USB sound card attached to get spdif optical output which is connected via a toslink cable to my audio receiver. Playback of a video with audio passthrough disabled is fine. Although i suspect that the multichannel surround sound gets 'lost' this way, because my amplifier shows '5.1 - Stereo' ins the display as input source. The problem now occurred if I change the audio to passthrough enabled. Now there is most of the time no audio at all during video playback, the amplifier shows 'no signal'. Sometimes the audio stream seems to recover for a short time, the amplifier shows ' D T S 5.1' or ' DolbyD 5.1' (AC3 5.1 stream). If the sound recovers the are cracking and static sounds before the actual audio output starts for a few seconds before changing back to no sound at all again. This repeats all the time, every few seconds.
I think this is not a problem with the cabling, because with audio passthrough disabled the audio playback is fine.

This is the USB sound adapter I use:
Code: Select all
 # lsusb

Bus 001 Device 004: ID 04d9:1503 Holtek Semiconductor, Inc. Keyboard
Bus 001 Device 005: ID 0ccd:0077 TerraTec Electronic GmbH Aureon Dual USB     <-----
Bus 001 Device 003: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


dmsg output
Code: Select all
 dmesg
[    0.000000@0] Initializing cgroup subsys cpuset
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29 (ray@asimov) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11) ) #1 SMP Wed Mar 7 08:24:29 CET 2018
[    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000@0] fdt Reserved memory table:
[    0.000000@0]            linux,meson-fb: 0x000000007e700000 - 0x0000000080000000  (25 MiB)
[    0.000000@0]                  linux,di: 0x000000007c900000 - 0x000000007e700000  (30 MiB)
[    0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c900000, size 30 MiB
[    0.000000@0]             linux,ion-dev: 0x000000007a900000 - 0x000000007c900000  (32 MiB)
[    0.000000@0]               linux,ppmgr: 0x000000007a900000 - 0x000000007a900000  (0 MiB)
[    0.000000@0]        linux,codec_mm_cma: 0x000000006e800000 - 0x000000007a800000  (192 MiB)
[    0.000000@0] cma: Reserved 192 MiB at 6e800000, total cma pages:49152
[    0.000000@0]   linux,codec_mm_reserved: 0x000000006a700000 - 0x000000006e800000  (65 MiB)
[    0.000000@0] fdt Reserved memory total:  347 MiB
[    0.000000@0] cma: Reserved 8 MiB at 69c00000, total cma pages:51200
[    0.000000@0] On node 0 totalpages: 513024
[    0.000000@0]   Normal zone: 11039 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 513024 pages, LIFO batch:31
[    0.000000@0] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000@0] PERCPU: Embedded 11 pages/cpu @ffffffc07a8a6000 s13760 r8192 d23104 u45056
[    0.000000@0] pcpu-alloc: s13760 r8192 d23104 u45056 alloc=11*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 501985
[    0.000000@0] Kernel command line: console=ttyS0,115200 BOOT_IMAGE=KERNEL boot=LABEL=LIBREELEC disk=LABEL=STORAGE no_console_suspend logo=osd1,loaded,0x3f800000,1080p60hz vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=nocvbs mac=00:1e:06:35:15:e4 consoleblank=0 max_freq=1536 maxcpus=4 hdmitx=cec17 quiet console=tty0 systemd.show_status=auto
[    0.000000@0] logo: osd1
[    0.000000@0] logo: loaded
[    0.000000@0] logo: 0x3f800000
[    0.000000@0] logo: 1080p60hz
[    0.000000@0] vout_serve: 1080p60hz
[    0.000000@0] vout_serve: en: 1
[    0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
[    0.000000@0] vout_serve: 1080p60hz
[    0.000000@0] vout_serve: enable: 1
[    0.000000@0] logo: get hdmimode: 1080p60hz
[    0.000000@0] logo: get cvbsmode: nocvbs
[    0.000000@0] dvfs [get_max_freq] - max_freq : 1536000000
[    0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0x17
[    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0] Memory: 1651284K/2052096K available (6333K kernel code, 730K rwdata, 2444K rodata, 2857K init, 2919K bss, 400812K reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff8042b86800   (    43 MB)
[    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc07e700000   (  2023 MB)
[    0.000000@0]       .init : 0xffffffc001914000 - 0xffffffc001bde5c0   (  2858 kB)
[    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001913724   (  8782 kB)
[    0.000000@0]       .data : 0xffffffc001bdf000 - 0xffffffc001c95848   (   731 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] arch_multi_cluster:0
[    0.000000@0] Hierarchical RCU implementation.
[    0.000000@0]        RCU debugfs-based tracing is enabled.
[    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.000019@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
[    0.000201@0] Console: colour dummy device 80x25
[    0.000300@0] console [tty0] enabled
[    0.002676@0] allocated 8388608 bytes of page_cgroup
[    0.002679@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.002689@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.002695@0] pid_max: default: 32768 minimum: 301
[    0.002780@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.002785@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005943@0] Initializing cgroup subsys memory
[    0.005962@0] Initializing cgroup subsys devices
[    0.005968@0] Initializing cgroup subsys freezer00[    0.005972@0] Initializing cgroup subsys blkio
[    0.005976@0] Initializing cgroup subsys net_prio
[    0.006346@0] /cpus/cpu@0: Missing clock-frequency property
[    0.006354@0] /cpus/cpu@1: Missing clock-frequency property
[    0.006359@0] /cpus/cpu@2: Missing clock-frequency property
[    0.006364@0] /cpus/cpu@3: Missing clock-frequency property
[    0.007647@0] Meson chip version = RevC (1F:C - 0:0)
[    0.008424@1] CPU1: Booted secondary processor
[    0.009206@2] CPU2: Booted secondary processor
[    0.009957@3] CPU3: Booted secondary processor
[    0.010003@0] Brought up 4 CPUs
[    0.010011@0] SMP: Total of 4 processors activated.
[    0.010303@0] devtmpfs: initialized
[    0.014529@0] sched: registering cpufreq notifiers for scale-invariant loads
[    0.020352@0] cma: cma_init_reserved_areas, use_cma_first:1
[    0.020410@0] pinctrl core: initialized pinctrl subsystem
[    0.020864@0] regulator-dummy: no parameters
[    0.021382@0] NET: Registered protocol family 16
[    0.022673@0] aml_vdac_init: module init
[    0.022774@0] register canvas platform driver
[    0.022825@0] register rdma platform driver
[    0.023485@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001be6000
[    0.023760@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.024971@0] software IO TLB [mem 0x65400000-0x65800000] (4MB) mapped at [ffffffc065400000-ffffffc0657fffff]
[    0.025244@0] aml_i2c version: 20140813
[    0.025376@0] i2c-core: driver [pmu4] using legacy resume method
[    0.025422@0] codec_mm:codec_mm_module_init
[    0.025471@0] media_configs_system_init
[    0.025638@0] meson_mpll_clk: register mpll_clk_out0 success done
[    0.025646@0] meson_mpll_clk: register mpll_clk_out1 success done
[    0.025652@0] meson_mpll_clk: register mpll_clk_out2 success done
[    0.025817@0] clk_sys: register PLL sys_pll success done
[    0.025846@0] gxbb_clk: [ xtal       ] ->clockrate: 24000000Hz
[    0.025850@0] gxbb_clk: [ 32Khz      ] ->clockrate: 32000Hz
[    0.025854@0] gxbb_clk: [ clk81      ] ->clockrate: 166666666Hz
[    0.025857@0] gxbb_clk: [ fixed_pll  ] ->clockrate: 2000000000Hz
[    0.025860@0] gxbb_clk: [ fclk_div2  ] ->clockrate: 1000000000Hz
[    0.025864@0] gxbb_clk: [ fclk_div3  ] ->clockrate: 666666666Hz
[    0.025867@0] gxbb_clk: [ fclk_div4  ] ->clockrate: 500000000Hz
[    0.025870@0] gxbb_clk: [ fclk_div5  ] ->clockrate: 400000000Hz
[    0.025873@0] gxbb_clk: [ fclk_div7  ] ->clockrate: 285714285Hz
[    0.025895@0] gxbb_clk: clock initialization complete
[    0.026013@0] clkmsr: msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
[    0.027610@0] aml_iomap: amlogic iomap probe done
[    0.028013@0] pinmux-gxbb c1109880.pinmux: Init pinux probe!
[    0.028572@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.028912@0] aml-i2c c1108500.i2c: add adapter aml_i2c_adap1(ffffffc0103e00e0)
[    0.029359@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
[    0.029364@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
[    0.029367@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
[    0.029371@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 1000000000
[    0.029374@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1296000000
[    0.029377@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1536000000
[    0.029380@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    0.031047@0] codec_mm has 2 memory regions
[    0.031070@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
[    0.031078@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
[    0.031151@0] codec_mm has 2 memory regions
[    0.031160@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
[    0.031166@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
[    0.032357@0] vpu: driver version: v04
[    0.032369@0] vpu: load vpu_clk: 666667000Hz(7)
[    0.032434@0] vpu: vpu_probe OK
[    0.032906@0] tv_vout: tvout_probe
[    0.032912@0] tv_vout: chrdev devno 266338304 for disp
[    0.032922@0] vout_notify: vout_register_server
[    0.032926@0] tv_vout: register tv module server ok
[    0.033084@0] tv_vout: create cdev tv
[    0.033088@0] tv_vout: tvout_probe OK
[    0.033364@0] canvas_probe reg=00000000c8838000,size=400
[    0.033377@0] canvas maped reg_base =ffffff800019e000
[    0.036148@0] rdma_probe
[    0.225451@0] bio: create slab <bio-0> at 0
[    0.226015@0] SCSI subsystem initialized
[    0.226375@0] usbcore: registered new interface driver usbfs
[    0.226434@0] usbcore: registered new interface driver hub
[    0.226505@0] usbcore: registered new device driver usb
[    0.226828@0] pps_core: LinuxPPS API ver. 1 registered
[    0.226832@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.226874@0] PTP clock support registered
[    0.227204@0] hdmitx: system: Ver: 2014May6
[    0.227290@0] hdmitx: amhdmitx_probe
[    0.227535@0] hdmitx: hdmi_init_chip_type: 0
[    0.227541@0] hdmitx: system: not find match init-data
[    0.227547@0] hdmitx hpd irq = 89
[    0.228053@0] hdmitx20: Mapped PHY: 0xc1100000
[    0.228063@0] hdmitx20: Mapped PHY: 0xc8834400
[    0.228072@0] hdmitx20: Mapped PHY: 0xd0100000
[    0.228086@0] hdmitx20: Mapped PHY: 0xc8100000
[    0.228090@0] hdmitx20: Mapped PHY: 0xc883c000
[    0.228095@0] hdmitx20: Mapped PHY: 0xc1104400
[    0.228099@0] hdmitx20: Mapped PHY: 0xc883a000
[    0.228103@0] hdmitx20: Mapped PHY: 0xda83a000
[    0.228107@0] hdmitx20: Mapped PHY: 0xd0044000
[    0.228115@0] hdmitx: alread display in uboot 0x10
[    0.228149@0] avmute set to 1
[    0.228156@0] hdmitx: attr 444,8bit
[    0.228397@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
[    0.228402@0] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
[    0.228414@0] tv_vout: already display in uboot
[    0.228418@0] vout_serve: vinfo mode is: 1080p60hz
[    0.228421@0] vout_serve: init mode 1080p60hz
[    0.228581@0] vout_serve: create_vout_fops OK
[    0.228584@0] vout_serve: create vout attribute OK
[    0.228587@0] vout_serve: meson_vout_probe OK
[    0.228685@0] logo: logo_init
[    0.228863@0] osd_rdma: osd_rdma_init: rdma_table p=0x69c41000,op=0x69c41000 , v=0xffffff80001d1000
[    0.228881@0] rdma_register, rdma_table_addr ffffff80001d7000 rdma_table_addr_phy 69c42000 reg_buf ffffffc065284000
[    0.228885@0] rdma_register success, handle 1 table_size 4096
[    0.228888@0] osd_rdma: osd_rdma_init:osd rdma handle = 1.
[    0.229076@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.230335@0] Switched to clocksource arch_sys_counter
[    0.230486@0] FS-Cache: Loaded
[    0.235273@0] hdmitx: system: irq 80000002
[    0.237198@0] NET: Registered protocol family 2
[    0.237550@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.237638@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.237805@0] TCP: Hash tables configured (established 16384 bind 16384)
[    0.237867@0] TCP: reno registered
[    0.237875@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.237908@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.238043@0] NET: Registered protocol family 1
[    0.238164@0] pwm: output_co = 8 ; clock_co = 8
[    0.238184@0] pwm: npwm= 8
[    0.238312@0] pwm: probe ok
[    0.280439@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.286942@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.287295@1] msgmni has been set to 3625
[    0.287972@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.288018@1] io scheduler noop registered (default)
[    0.288023@1] io scheduler deadline registered
[    0.288035@1] io scheduler cfq registered
[    0.288587@1] meson-rng c8834000.rng: hwrng registered
[    0.291029@1] loop: module loaded
[    0.292807@1] tun: Universal TUN/TAP device driver, 1.6
[    0.292814@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.296464@1] libphy: stmmac: probed
[    0.296473@1] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.296478@1] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    0.296754@1] PPP generic driver version 2.4.2
[    0.296923@1] NET: Registered protocol family 24
[    0.297006@1] usbcore: registered new interface driver smsc95xx
[    0.297221@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.297233@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.297326@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.297485@1] usbcore: registered new interface driver usb-storage
[    0.297649@1] usbcore: registered new interface driver usbserial
[    0.297707@1] usbcore: registered new interface driver usbserial_generic
[    0.297766@1] usbserial: USB Serial support registered for generic
[    0.297823@1] usbcore: registered new interface driver pl2303
[    0.297876@1] usbserial: USB Serial support registered for pl2303
[    0.298365@1] mousedev: PS/2 mouse device common for all mice
[    0.298508@1] i2c /dev entries driver
[    0.299381@1] ledtrig-cpu: registered to indicate activity on CPUs
[    0.299492@1] hidraw: raw HID events driver (C) Jiri Kosina
[    0.301278@1] usbcore: registered new interface driver usbhid
[    0.301284@1] usbhid: USB HID core driver
[    0.301405@1] ashmem: initialized
[    0.301662@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001f84c0
[    0.301680@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    0.301691@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[    0.306630@1] console [ttyS0] enabled
[    0.306839@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001fa4c0
[    0.306853@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    0.307223@1] hdmitx_hdcp_init
[    0.307466@1] secmon has 1 memory regions
[    0.307498@1] secmon: share in base: 0xffffff80001fc000, share out base: 0xffffff80001fe000
[    0.307503@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
[    0.307506@1] secmon: probe done
[    0.307631@1] storage: storage in base: 0xffffff8001600000
[    0.307634@1] storage: storage out base: 0xffffff8001680000
[    0.307637@1] storage: storage block base: 0xffffff8001700000
[    0.307639@1] storage: probe done!
[    0.307840@1] aml_sd_emmc_probe: line 3608
[    0.307844@1] mmc driver version: 1.07, 2017-4-26: Support new emmc host controller for version 3
[    0.309222@1] aml_sd_emmc_reg_init 1152
[    0.309282@1] get property:                ocr_avail, value:0x00200080
[    0.309286@1] get property:                    f_min, value:400000
[    0.309290@1] get property:                    f_max, value:100000000
[    0.309294@1] get property:             max_req_size, value:0x00020000
[    0.309297@1] get property:                   irq_in, value:3
[    0.309301@1] get property:                  irq_out, value:5
[    0.309316@1] get property:                  gpio_cd, str:
[    0.309321@1] get property:                  pinname, str:sd
[    0.309325@1] get property:                 jtag_pin, str:
[    0.309330@1] get property:               vol_switch, str:
[    0.309333@1] get property:            vol_switch_18, value:1
[    0.309337@1] get property:         vol_switch_delay, value:150
[    0.309340@1] get property:                card_type, value:5
[    0.309345@1] get property:                gpio_dat3, str:
[    0.309357@1] sd:pdata->caps = 7
[    0.309360@1] sd:pdata->caps2 = 0
[    0.309363@1] sd:pdata->pm_caps = 0
[    0.340497@3] [aml_is_card_insert] card OUT
[    0.340543@2] [aml_is_card_insert] card OUT
[    0.340552@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    0.340582@2] aml_sd_emmc_probe: line 3608
[    0.341994@2] aml_sd_emmc_reg_init 1152
[    0.342056@2] get property:                ocr_avail, value:0x00200080
[    0.342060@2] get property:                    f_min, value:400000
[    0.342064@2] get property:                    f_max, value:100000000
[    0.342068@2] get property:             max_req_size, value:0x00020000
[    0.342074@2] get property:                  pinname, str:emmc
[    0.342079@2] get property:                card_type, value:1pr[    0.342083@2] get property:                 tx_phase, value:0
[    0.342098@2] get property:                gpio_dat3, str:
[    0.342102@2] get property:                 hw_reset, str:
[    0.342124@2] emmc:pdata->caps = c0000d47
[    0.342132@2] emmc:pdata->caps2 = 8021
[    0.342135@2] emmc:pdata->pm_caps = 0
[    0.342154@2] storage 0, boot 1
[    0.342158@2] get_storage_dev return 1
[    0.380352@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    0.380607@1] ion_dev has 1 memory regions
[    0.380643@1] ion_dev ion_dev.22: assigned reserved memory node linux,ion-dev ok
[    0.382494@1] ion_carveout_heap_create: base 2056257536 size 33554432 align 0
[    0.382703@1] fb: osd_init_module
[    0.382759@1] fb: viu vsync irq: 35
[    0.382764@1] meson-fb has 1 memory regions
[    0.382783@1] meson-fb meson-fb.14: assigned reserved memory node linux,meson-fb ok
[    0.382787@1] fb: osd_set_free_scale_mode_hw
[    0.382798@1] fb: osd_probe vinfo:ffffffc001c380e8
[    0.382805@1] fb: init fbdev bpp is:32
[    0.383134@1] fb: set osd0 reverse as NONE
[    0.385605@0] fb: osd probe OK
[    0.385705@1] ge2d: ge2d_init_module
[    0.385714@1] ge2d: ge2d_dev major:244
[    0.385978@1] ge2d: vpu clock is 666660000 HZ
[    0.385990@1] ge2d: ge2d clock is 400 MHZ
[    0.385999@1] ge2d: ge2d: pdev=ffffffc065011400, irq=182, rstc=0xffffffc065139200, clk=ffffffc010389e00
[    0.386025@1] ge2d: mapped phy: 0xd0160000
[    0.386032@1] ge2d: ge2d start monitor
[    0.386062@2] ge2d: ge2d workqueue monitor start
[    0.386189@1] codec:Amlogic A/V streaming port init
[    0.387342@1] codec:get gate demux control ok ffffffc065149d80
[    0.387348@1] codec:get gate parser_top control ok ffffffc065149e00
[    0.387353@1] codec:get gate vpu_intr control ok ffffffc065149e80
[    0.387359@1] codec:get gate vdec control ok ffffffc065149f00
[    0.387804@1] codec:[tsync_pcr_init]init success.
[    0.387875@1] codec:amvideocap_probe,amvideocap
[    0.387879@1] codec:use cma buf.
[    0.389470@1] codec:vdec_request_irq ffffffc0014e7078, vsync
[    0.389685@1] codec:create_ge2d_work_queue video task ok
[    0.390235@1] rdma_register, rdma_table_addr ffffff8000452000 rdma_table_addr_phy 69c48000 reg_buf ffffffc0653f8000
[    0.390241@1] rdma_register success, handle 2 table_size 32768
[    0.390245@1] video_rdma:rdma_init video rdma handle = 2.
[    0.390254@1] codec:register clk_set_setting cpu[31]
[    0.390785@1] DI: di_module_init ok.
[    0.390794@1] DI: di_module_init: major 240
[    0.390943@1] DI: di_probe
[    0.391079@1] deinterlace has 1 memory regions
[    0.391116@1] DI: di reveser memory 0x7c900000, size 30MB.
[    0.391124@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[    0.391129@1] DI-di_probe: get flag_cma error.
[    0.391168@1] di_irq:78,timerc_irq:38
[    0.391364@1] rdma_register, rdma_table_addr ffffff800045b000 rdma_table_addr_phy 69c50000 reg_buf ffffffc065358000
[    0.391368@1] rdma_register success, handle 3 table_size 8192
[    0.391371@1] DI: di_probe allocate rdma channel 3.
[    0.391376@1] DI: DI hw version 2.
[    0.391384@1] 0x000000db:Y=db,U=0,V=0
[    0.391387@1] 0x000000dc:Y=dc,U=0,V=0
[    0.391390@1] 0x000000dd:Y=dd,U=0,V=0
[    0.391393@1] 0x000000de:Y=de,U=0,V=0
[    0.391396@1] 0x000000df:Y=df,U=0,V=0
[    0.391399@1] 0x000000e0:Y=e0,U=0,V=0
[    0.391402@1] 0x000000e1:Y=e1,U=0,V=0
[    0.391405@1] 0x000000e2:Y=e2,U=0,V=0
[    0.391408@1] 0x000000e3:Y=e3,U=0,V=0
[    0.391411@1] 0x000000f0:Y=f0,U=0,V=0
[    0.391416@1] 0x000000f1:Y=f1,U=0,V=0
[    0.391419@1] 0x000000f2:Y=f2,U=0,V=0
[    0.391422@1] 0x000000f3:Y=f3,U=0,V=0
[    0.391425@1] 0x000000f4:Y=f4,U=0,V=0
[    0.391428@1] 0x000000f5:Y=f5,U=0,V=0
[    0.391431@1] 0x000000f6:Y=f6,U=0,V=0
[    0.391435@1] 0x000000f7:Y=f7,U=0,V=0
[    0.391438@1] 0x000000f8:Y=f8,U=0,V=0
[    0.391441@1] 0x000000f9:Y=f9,U=0,V=0
[    0.391444@1] 0x000000fa:Y=fa,U=0,V=0
[    0.391447@1] 0x000000fb:Y=fb,U=0,V=0
[    0.391449@1] 0x000000fc:Y=fc,U=0,V=0
[    0.391506@1] DI: di_probe:Di use HRTIMER
[    0.391716@1] efusekeynum: 4
[    0.391724@1] efusekeyname:             mac  offset:     0   size:     6
[    0.391730@1] efusekeyname:          mac_bt  offset:     6   size:     6
[    0.391736@1] efusekeyname:        mac_wifi  offset:    12   size:     6
[    0.391741@1] efusekeyname:            usid  offset:    18   size:    16
[    0.391981@1] efuse efuse.10: probe OK!
[    0.392263@1] 6aml_unifykeys_init done!
[    0.392267@1] PPMGRDRV: warn: ppmgr module init func called
[    0.392306@1] PPMGRDRV: err: ppmgr_driver_probe called
[    0.395022@1] ppmgr has 1 memory regions
[    0.395045@1] PPMGRDRV: info: ppmgr_dev major:238
[    0.395222@1] PPMGRDRV: info: ppmgr_probe done
[    0.395395@1] amlogic rfkill init
[    0.395484@1] audio_dsp: [dsp]register dsp to char divece(257)
[    0.395957@1] amaudio: amaudio: driver amaudio succuess!
[    0.396230@1] [RX]-hdmirx: hdmirx_init.
[    0.396234@1] ESM HLD: Initializing...
[    0.396238@1] ESM HLD: Registering device range 'esm_rx'...
[    0.396244@1] ESM HLD: Device range 'esm_rx' has been registered.
[    0.396248@1] ESM HLD: Creating class /sys/class/elliptic_rx...
[    0.396293@1] ESM HLD: The class /sys/class/elliptic_rx has been created.
[    0.396297@1] ESM HLD: Creating device 'esm_rx'...
[    0.396379@1] ESM HLD: Device 'esm_rx' has been created.
[    0.396382@1] ESM HLD: Done initializing the HLD driver.
[    0.396386@1] aml_vecm_init:module init
[    0.396703@1] saradc c1108680.saradc: initialized by BL30
[    0.396714@1] saradc c1108680.saradc: calibration start:
[    0.396758@1] saradc c1108680.saradc: nominal=0, value=3
[    0.396801@1] saradc c1108680.saradc: nominal=256, value=252
[    0.396843@1] saradc c1108680.saradc: nominal=512, value=508
[    0.396885@1] saradc c1108680.saradc: nominal=768, value=765
[    0.396927@1] saradc c1108680.saradc: nominal=1023, value=1021
[    0.396931@1] saradc c1108680.saradc: calibration end: coef=4088
[    0.397054@1] gpio-key gpio_keypad.41: gpio_key: 0 name(power) pin()
[    0.397060@1] gpio-key gpio_keypad.41: amlogic_gpio_name_map_num pin 0!::
[    0.397070@1] gpio-key gpio_keypad.41: gpio_key: 0 power(125)
[    0.397089@1] gpio-key gpio_keypad.41: start setup_timer
[    0.397096@1] gpio-key gpio_keypad.41: power key(116) registed.
[    0.397219@1] input: gpio_keypad as /devices/gpio_keypad.41/input/input0
[    0.397328@1] gpio-key gpio_keypad.41: gpio keypad register input device completed.
[    0.397335@1] input input0: gpio keypad major:236
[    0.398909@1] cpuinfo: probe of cpu_info.9 failed with error -71
[    0.399380@1] input: cec_input as /devices/virtual/input/input1
[    0.399554@1] cectx c810023c.aocec: aml_cec_probe(): no hdmirx reg resource
[    0.405821@1] cectx c810023c.aocec: aml_cec_probe(): no hhi reg resource
[    0.412459@1] cec: wake up flag:0
[    0.415841@1] aml-i2s-dai I2S.33: I2S Mic is in platform!
[    0.415986@1] aml_pcm_dai: pcm mode detection =1
[    0.416461@1] aml_snd_card: aml_multi_dev_parse_of ...
[    0.416466@1] aml_snd_card: no multi dev!
[    0.416671@1] aml_snd_card: headphone detection disable=1
[    0.416675@1] aml_snd_card: no spk event delay time set
[    0.419257@1] aml_snd_m8_card aml_m8_snd.40: dummy <-> I2S.33 mapping ok
[    0.421856@1] aml_snd_m8_card aml_m8_snd.40: dit-hifi <-> SPDIF.34 mapping ok
[    0.421935@1] aml_pcm: enter aml_pcm_new dai->name: PCM.35 dai->id: 0
[    0.422387@1] aml_snd_m8_card aml_m8_snd.40: pcm2bt-pcm <-> PCM.35 mapping ok
[    0.425590@1] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
[    0.429849@1] TCP: cubic registered
[    0.430286@1] NET: Registered protocol family 10
[    0.430866@1] NET: Registered protocol family 17
[    0.430895@1] Key type dns_resolver registered
[    0.431625@1] Registering SWP/SWPB emulation handler
[    0.432045@1] regulator-dummy: disabling
[    0.432245@1] console [netcon0] enabled
[    0.432248@1] netconsole: network logging started
[    0.432254@1] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    0.436566@1] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
[    0.436593@1] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
[    0.437724@0] gxbb_pm: enter meson_pm_probe!
[    0.437762@0] gxbb_pm: meson_pm_probe done
[    0.438174@0] cpucore_cooling_register, max_cpu_core_num:4
[    0.453590@0] ALSA device list:
[    0.453596@0]   #0: AML-M8AUDIO
[    0.454950@0] Freeing unused kernel memory: 2856K (ffffffc001914000 - ffffffc001bde000)
[    0.464409@3] emmc: BKOPS_EN bit is not set
[    0.470714@3] emmc: clk 100000000 SDR mode tuning start
[    0.470999@3] emmc: rx_tuning_result[1] = 10
[    0.471254@3] emmc: rx_tuning_result[2] = 10
[    0.471510@3] emmc: rx_tuning_result[3] = 10
[    0.471758@3] emmc: rx_tuning_result[4] = 10
[    0.471992@3] emmc: rx_tuning_result[5] = 10
[    0.472220@3] emmc: rx_tuning_result[6] = 10
[    0.472450@3] emmc: rx_tuning_result[7] = 10
[    0.472703@3] emmc: rx_tuning_result[8] = 10
[    0.472933@3] emmc: rx_tuning_result[9] = 10
[    0.472937@3] emmc: best_win_start =1, best_win_size =9
[    0.472941@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x52000
[    0.472947@3] emmc: gclock =0x100024a, gdelay=0x85854055, gadjust=0x52000
[    0.473059@3] emmc: support driver strength type 1
[    0.473102@3] emmc: try set sd/emmc to DDR mode
[    0.473108@3] emmc: try set sd/emmc to DDR mode
[    0.473122@0] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[    0.473127@3] [aml_host_bus_fsm_show] emmc: err: wait for irq service, bus_fsm:0x8
[    0.473137@3] aml_sd_emmc_data_thread 2642 emmc: cmd:6
[    0.473141@3] [aml_sd_emmc_data_thread] aml_sd_emmc_data_thread() 2658: set 1st retry!
[    0.473145@3] [aml_sd_emmc_data_thread] retry cmd 6 the 10-th time(s)
[    0.473148@3] emmc, 10 retry, adj 5 -> 6
[    0.473183@0] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[    0.473187@3] [aml_host_bus_fsm_show] emmc: err: wait for irq service, bus_fsm:0x8
[    0.473203@3] aml_sd_emmc_data_thread 2642 emmc: cmd:6
[    0.473207@3] [aml_sd_emmc_data_thread] retry cmd 6 the 9-th time(s)
[    0.473210@3] emmc, 9 retry, adj 6 -> 7
[    0.475245@0] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[    0.475248@3] [aml_host_bus_fsm_show] emmc: err: wait for irq service, bus_fsm:0x8
[    0.475255@3] aml_sd_emmc_data_thread 2642 emmc: cmd:6
[    0.475259@3] [aml_sd_emmc_data_thread] retry cmd 6 the 8-th time(s)
[    0.475262@3] emmc, 8 retry, adj 7 -> 8
[    0.479040@0] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[    0.479043@3] [aml_host_bus_fsm_show] emmc: err: wait for irq service, bus_fsm:0x8
[    0.479051@3] aml_sd_emmc_data_thread 2642 emmc: cmd:6
[    0.479056@3] [aml_sd_emmc_data_thread] retry cmd 6 the 7-th time(s)
[    0.479059@3] emmc, 7 retry, adj 8 -> 9
[    0.482918@0] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[    0.482922@3] [aml_host_bus_fsm_show] emmc: err: wait for irq service, bus_fsm:0x8
[    0.482930@3] aml_sd_emmc_data_thread 2642 emmc: cmd:6
[    0.482934@3] [aml_sd_emmc_data_thread] retry cmd 6 the 6-th time(s)
[    0.482937@3] emmc, 6 retry, adj 9 -> 0
[    0.486712@3] emmc: new HS400 MMC card at address 0001
[    0.486720@1] emmc: clock 100000000, 8-bit-bus-width
[    0.486720@1]
[    0.487082@1] mmcblk0: emmc:0001 8GME4R 7.28 GiB
[    0.487191@1] mmcblk0rpmb: emmc:0001 8GME4R partition 3 512 KiB
[    0.487751@1]  mmcblk0: p1 p2
[    0.488570@1] clear_emmc_wait_flag
[    0.490380@1] input input0: key 116 down
[    0.498211@0] fb: osd_open index=0,open_count=1
[    0.498498@0] fb: Frame buffer memory assigned at
[    0.498505@0] fb:  0, phy: 0x000000007e700000, vir:0xffffff8001a80000, size=24576K
[    0.498505@0]
[    0.498511@0] fb: ---------------clear fb0 memory ffffff8001a80000
[    0.512195@0] fb: osd[0] canvas.idx =0x40
[    0.512199@0] fb: osd[0] canvas.addr=0x7e700000
[    0.512202@0] fb: osd[0] canvas.width=7680
[    0.512205@0] fb: osd[0] canvas.height=2160
[    0.512208@0] fb: osd[0] frame.width=1920
[    0.512210@0] fb: osd[0] frame.height=1080
[    0.519060@0] fb: osd_release now.index=0,open_count=1
[    0.520253@0] fb: osd_open index=1,open_count=1
[    0.520280@0] fb: Frame buffer memory assigned at
[    0.520285@0] fb:  1, phy: 0x000000007ff00000, vir:0xffffff8003300000, size=1024K
[    0.520285@0]
[    0.520290@0] fb: fb1 open, logo index:1
[    0.520401@0] fb: osd_release now.index=1,open_count=1
[    0.520591@2] fb: osd_set_free_scale_enable_hw
[    0.535852@2] fb: osd_set_free_scale_enable_hw
[    0.550448@0] hdmitx: plugin
[    0.552633@2] vfm_map_store:rm default
[    0.552633@2]
[    0.552757@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    0.552757@2]
[    0.552908@2] fb: osd[0] enable: 1 (sh)
[    0.569102@2] fb: osd[1] enable: 0 (sh)
[    0.617005@3] fb: osd_open index=0,open_count=1
[    0.618989@3] Console: switching to colour frame buffer device 240x67
[    0.651037@3] dwc_otg dwc2_b: dwc_otg_driver_probe(ffffffc065098000)
[    0.679691@0] EDID Parser:
[    0.679881@0] hdmitx: edid: change preferred_mode from 0 to 31
[    0.679885@0] hdmitx: get PMT vic: 16
[    0.679890@0] hdmitx: edid: find IEEEOUT
[    0.679898@0] hdmitx: update rx hdr info 0 at edid parsing
[    0.679933@0] 00ffffffffffff004dd9022c0101010101150103806639780a0dc9a057479827
[    0.679933@0] 12484c21080081800101010101010101010101010101023a801871382d40582c
[    0.679933@0] 4500fa3d3200001e011d007251d01e206e285500fa3d3200001e000000fc0053
[    0.679933@0] 4f4e592054560a2020202020000000fd00303e0e460f000a2020202020200155
[    0.679933@0]
[    0.679933@0]
[    0.679971@0] 02033bf0531f101405130420223c3e1216030711150206012609070715075083
[    0.679971@0] 01000074030c001000b82d2fd00a0140007f203070809076e200fb023a80d072
[    0.679971@0] 382d40102c4580fa3d3200001e011d00bc52d01e20b8285540fa3d3200001e01
[    0.679971@0] 1d80d0721c1620102c2580fa3d3200009e0000000000000000000000000000f5
[    0.679971@0]
[    0.679971@0]
[    0.679986@0] hdmitx: video: get current mode: 1080p60hz
[    0.679989@0] hdmitx: update rx hdr info 0
[    0.679992@0] hdmitx: update physcial size: 1020 570
[    0.680006@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
[    0.680015@0] hdmtix: set audio
[    0.680026@0] hdmitx tx_aud_src = 0
[    0.680050@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[    0.680053@0] hdmitx aud_n_para = 6144
[    0.691116@3] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    0.691135@3] dwc_otg dwc2_b: base=0xffffff8003500000
[    0.691140@3] dwc_otg dwc2_b: dwc_otg_device=0xffffffc064c96200
[    1.193808@0] dwc_otg: Core Release: 3.10a
[    1.193814@0] dwc_otg: Setting default values for core params
[    1.193826@0] dwc_otg: curmode: 1, host_only: 1
[    1.193837@0] dwc_otg dwc2_b: DMA config: BURST_DEFAULT
[    1.206002@0] dwc_otg: Using Buffer DMA mode
[    1.206008@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.206012@0] dwc_otg: Working on port type = HOST
[    1.206469@2] dwc_otg dwc2_b: DWC OTG Controller
[    1.206489@2] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    1.206514@2] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    1.206518@2] dwc_otg: -------hcd->flags.d32 = 0
[    1.206542@2] dwc_otg: Init: Port Power? op_state=1
[    1.206545@2] dwc_otg: Init1: Power Port (0)
[    1.206684@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.206689@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.206694@2] usb usb1: Product: DWC OTG Controller
[    1.206698@2] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[    1.206702@2] usb usb1: SerialNumber: dwc2_b
[    1.207148@1] hub 1-0:1.0: USB hub found
[    1.207167@1] hub 1-0:1.0: 1 port detected
[    1.207349@1] dwc_otg dwc2_a: dwc_otg_driver_probe(ffffffc065098800)
[    1.207394@1] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    1.207411@1] dwc_otg dwc2_a: base=0xffffff8003580000
[    1.207416@1] dwc_otg dwc2_a: dwc_otg_device=0xffffffc064c9aa00
[    1.219034@0] dwc_otg: Core Release: 3.10a
[    1.219041@0] dwc_otg: Setting default values for core params
[    1.219058@0] dwc_otg: curmode: 1, host_only: 0
[    1.229076@0] dwc_otg dwc2_a: DMA config: BURST_DEFAULT
[    1.241244@0] dwc_otg: Using Buffer DMA mode
[    1.241249@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.241252@0] dwc_otg: Working on port type = OTG
[    1.241255@0] dwc_otg: Current port type: SLAVE
[    1.241519@0] dwc_otg dwc2_a: DWC OTG Controller
[    1.241534@0] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    1.241555@0] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    1.241632@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.241638@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.241642@0] usb usb2: Product: DWC OTG Controller
[    1.241647@0] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[    1.241651@0] usb usb2: SerialNumber: dwc2_a
[    1.242056@1] hub 2-0:1.0: USB hub found
[    1.242073@1] hub 2-0:1.0: 1 port detected
[    1.242224@1] dwc_otg: Dedicated Tx FIFOs mode
[    1.242597@1] dwc_otg: using timer detectid change, ffffffc0653b5800
[    1.395605@2] fb: osd_open index=0,open_count=2
[    1.395860@2] fb: osd_release now.index=0,open_count=2
[    1.400477@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    1.533169@0] fb: osd_open index=0,open_count=2
[    1.580421@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.580685@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[    1.602474@0] fb: osd_release now.index=0,open_count=2
[    1.618907@3] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.619139@3] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.628573@0] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.781683@1] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    1.781693@1] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.781698@1] usb 1-1: Product: USB2.0 Hub
[    1.782459@1] hub 1-1:1.0: USB hub found
[    1.782748@1] hub 1-1:1.0: 4 ports detected
[    2.060714@2] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[    2.175426@2] usb 1-1.1: New USB device found, idVendor=045e, idProduct=0039
[    2.175437@2] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.175442@2] usb 1-1.1: Product: Microsoft IntelliMouse® Optical
[    2.175447@2] usb 1-1.1: Manufacturer: Microsoft
[    2.184253@1] input: Microsoft Microsoft IntelliMouse® Optical as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:0039.0001/input/input2
[    2.184633@1] hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-dwc2_b-1.1/input0
[    2.210078@0] random: nonblocking pool is initialized
[    2.260631@2] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    2.380041@2] usb 1-1.3: New USB device found, idVendor=04d9, idProduct=1503
[    2.380052@2] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.380057@2] usb 1-1.3: Product: USB Keyboard
[    2.380061@2] usb 1-1.3: Manufacturer:
[    2.392154@1] input:   USB Keyboard as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D9:1503.0002/input/input3
[    2.392690@1] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-dwc2_b-1.3/input0
[    2.410705@1] input:   USB Keyboard as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3:1.1/0003:04D9:1503.0003/input/input4
[    2.410978@1] hid-generic 0003:04D9:1503.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-dwc2_b-1.3/input1
[    2.730879@0] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[    2.788112@1] systemd[1]: System time before build time, advancing clock.
[    2.814618@1] systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    2.814937@1] systemd[1]: Detected architecture arm64.
[    2.817032@1] systemd[1]: Set hostname to <LibreELEC>.
[    2.836473@0] usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=0077
[    2.836484@0] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.836489@0] usb 1-1.2: Product: USB PNP SOUND DEVICE
[    2.836493@0] usb 1-1.2: Manufacturer: C-Media Electronics Inc.
[    2.839170@0] input: C-Media Electronics Inc. USB PNP SOUND DEVICE as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2:1.3/0003:0CCD:0077.0004/input/input5
[    2.839451@0] hid-generic 0003:0CCD:0077.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB PNP SOUND DEVICE] on usb-dwc2_b-1.2/input3
[    2.842661@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    2.842677@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    2.883749@1] systemd[1]: Created slice System Slice.
[    2.884074@1] systemd[1]: Listening on udev Kernel Socket.
[    2.884607@1] systemd[1]: Listening on RPCbind Server Activation Socket.
[    2.885925@1] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[    2.886132@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    2.886327@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.886621@1] systemd[1]: Listening on udev Control Socket.
[    2.886885@1] systemd[1]: Listening on Journal Socket.
[    2.887317@1] systemd[1]: Reached target RPC Port Mapper.
[    2.889216@1] systemd[1]: Mounting POSIX Message Queue File System...
[    2.891442@1] systemd[1]: Mounting Kernel Debug File System...
[    2.893141@1] systemd[1]: Mounting Variable Directory...
[    2.893993@1] systemd[1]: Created slice User and Session Slice.
[    2.894307@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.894384@1] systemd[1]: Reached target Slices.
[    2.894569@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.894612@1] systemd[1]: Reached target Paths.
[    2.896511@1] systemd[1]: Starting Samba Configuration...
[    2.896967@1] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.899220@1] systemd[1]: Starting Show Version...
[    2.909175@1] systemd[1]: Started Debug Shell on /dev/ttyS0.
[    2.909283@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[    2.909997@1] systemd[1]: Mounted POSIX Message Queue File System.
[    2.910567@1] systemd[1]: Mounted Kernel Debug File System.
[    2.911066@1] systemd[1]: Mounted Variable Directory.
[    2.913352@1] systemd[1]: Started Show Version.
[    2.914462@1] systemd[1]: Started Samba Configuration.
[    2.916557@1] systemd[1]: Starting Create kernel modules tree from overlays...
[    2.928730@1] kernel-overlays-setup: setup base modules
[    2.956380@1] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29
[    2.979144@1] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[    2.979290@1] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[    2.979785@1] kernel-overlays-setup: done
[    2.980943@0] systemd[1]: Started Create kernel modules tree from overlays.
[    2.982834@0] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.984274@0] systemd[1]: Starting Mounting swapfile...
[    2.985845@0] systemd[1]: Starting udev Coldplug all Devices...
[    2.987777@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.989687@0] systemd[1]: Starting Setup machine-id...
[    2.993329@0] systemd[1]: Starting Load Kernel Modules...
[    2.994114@0] systemd[1]: Started Remount Root and Kernel File Systems.
[    3.001036@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.005366@2] systemd[1]: Started Setup machine-id.
[    3.007385@2] systemd[1]: Starting Journal Service...
[    3.009286@2] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.021366@3] Linux video capture interface: v2.00
[    3.025011@1] systemd[1]: Started Create Static Device Nodes in /dev.
[    3.025493@1] systemd[1]: Reached target Local File Systems (Pre).
[    3.035659@0] amlvid:err: amlvideo_init called
[    3.035666@0] amlvid:err: amlvideo_create_instance called
[    3.035673@0] amlvid:err: v4l2_dev.name=:amlvideo-000
[    3.035895@0] amlvideo-000: V4L2 device registered as video10
[    3.043035@1] systemd[1]: Started Mounting swapfile.
[    3.043403@1] systemd[1]: Reached target Swap.
[    3.044952@1] systemd[1]: Mounting Temporary Directory (/tmp)...
[    3.049730@1] systemd[1]: Mounted Temporary Directory (/tmp).
[    3.050067@1] systemd[1]: Reached target Local File Systems.
[    3.051949@1] systemd[1]: Starting Rebuild Journal Catalog...
[    3.059492@1] systemd[1]: Started Rebuild Journal Catalog.
[    3.070380@0] Registered IR keymap rc-odroid
[    3.071447@0] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input6
[    3.071641@0] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
[    3.075616@1] IR RC5(x) protocol handler initialized
[    3.076060@3] IR RC6 protocol handler initialized
[    3.078853@0] IR NEC protocol handler initialized
[    3.078880@1] IR SANYO protocol handler initialized
[    3.079412@3] IR Sony protocol handler initialized
[    3.079684@0] meson-ir c8100580.meson-ir: receiver initialized
[    3.080613@0] IR JVC protocol handler initialized
[    3.085511@0] Triggered SDIO WiFi power on and bus rescan.
[    3.085527@0] (NULL device *): [extern_wifi_set_enable] WIFI  Disable! 0
[    3.085627@1] lirc_dev: IR Remote Control driver registered, major 233
[    3.085668@3] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input7
[    3.087420@1] IR MCE Keyboard/mouse protocol handler initialized
[    3.087970@1] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[    3.087980@1] IR LIRC bridge handler initialized
[    3.099991@1] systemd[1]: Started Journal Service.
[    3.116639@2] systemd-journald[1890]: Received request to flush runtime journal from PID 1
[    3.390385@3] (NULL device *): [extern_wifi_set_enable] WIFI  Enable! 0
[    3.700378@3] Error: sdio_host is NULL
[    3.700397@3] [sdio_reinit] finish
[    3.815766@3] fb: osd_release now.index=0,open_count=1
[    3.815805@3] Console: switching to colour dummy device 80x25
[    3.870713@3] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.895680@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    4.025155@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.086564@2] mali-utgard d00c0000.mali: max pp is 3
[    4.086579@2] mali-utgard d00c0000.mali: set min pp to default 1
[    4.086583@2] mali-utgard d00c0000.mali: min pp is 1
[    4.086588@2] mali-utgard d00c0000.mali: set min clk default to 0
[    4.086592@2] mali-utgard d00c0000.mali: min clk  is 0
[    4.086648@2] mali-utgard d00c0000.mali: hiu io source  0xffffff80032e4440
[    4.086661@2] mali-utgard d00c0000.mali: hiu io source  0xffffff8001a7e000
[    4.086666@2] mali-utgard d00c0000.mali: num of pp used most of time 3
[    4.086671@2] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
[    4.086732@2] mali-utgard d00c0000.mali: max clk set 5
[    4.086737@2] mali-utgard d00c0000.mali: max clk  is 5
[    4.086741@2] mali-utgard d00c0000.mali: turbo clk set to 6
[    4.086745@2] mali-utgard d00c0000.mali: turbo clk  is 6
[    4.086749@2] mali-utgard d00c0000.mali: default clk  is 3
[    4.086756@2] mali-utgard d00c0000.mali: ====================0====================
[    4.086756@2] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
[    4.086765@2] mali-utgard d00c0000.mali: ====================1====================
[    4.086765@2] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
[    4.086772@2] mali-utgard d00c0000.mali: ====================2====================
[    4.086772@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
[    4.086780@2] mali-utgard d00c0000.mali: ====================3====================
[    4.086780@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
[    4.086788@2] mali-utgard d00c0000.mali: ====================4====================
[    4.086788@2] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
[    4.086796@2] mali-utgard d00c0000.mali: ====================5====================
[    4.086796@2] clk_freq= 792000000, clk_parent=  gp0_pll, voltage=1150, keep_count=1, threshod=<230 255>, clk_sample=792
[    4.086803@2] mali-utgard d00c0000.mali: ====================6====================
[    4.086803@2] clk_freq= 792000000, clk_parent=  gp0_pll, voltage=1150, keep_count=1, threshod=<230 255>, clk_sample=792
[    4.086809@2] mali-utgard d00c0000.mali: clock dvfs table size is 7
[    4.118148@1] gpu cooling register okay with err=0
[    4.132533@0] gpu core cooling register okay with err=0
[    4.139505@0] Mali: Mali device driver loaded
[    4.168780@1] usbcore: registered new interface driver snd-usb-audio
[    4.298420@2] 8021q: 802.1Q VLAN Support v1.8
[    5.146182@3] codec:vdec_create instance ffffff8003775000, total 1
[    5.146209@3] codec:vdec_release instance ffffff8003775000, total 0
[    5.146598@3] fb: osd_set_free_scale_enable_hw
[    5.152391@0] fb: osd_set_free_scale_enable_hw
[    5.189269@1] fb: osd_set_free_scale_enable_hw
[    5.202358@0] fb: osd_set_free_scale_enable_hw
[    8.230816@1] libphy: stmmac-0:00 - Link is Up - 1000/Full
[    8.231198@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.240432@3] tx queueing
[   15.377379@0] audio_dsp: buf=0
[   15.377418@0] audio_dsp: IEC958_mode_raw=0
[   15.472329@3] fb: osd_open index=0,open_count=1
[   15.485632@3] fb: osd_release now.index=0,open_count=1
[   15.497118@3] fb: osd_open index=0,open_count=1
[   15.508548@3] vout_serve: vmode set to null
[   15.508588@3] fb: current vmode=1080p60hz, cmd: 0x50000
[   15.508598@3] tv_vout: tv_set_current_vmode[930]fps_target_mode=88
[   15.508603@3] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
[   15.508614@3] tv_vout: 3Invalid video output modes.
[   15.508618@3] tv_vout: new mode =null set ok
[   15.508622@3] vout_serve: vinfo mode is: null
[   15.508625@3] vout_serve: new mode null set ok
[   15.508635@3] hdmitx: edid: not find mapped vic
[   15.508642@3] hdmitx: video: get current mode: null
[   15.508645@3] hdmitx: update physcial size: 1020 570
[   15.508649@3] hdmitx: video: null not valid hdmi mode
[   15.508675@3] fb: current vmode=null, cmd: 0x10000
[   15.519018@3] hdmitx: set frac_rate_policy as 0
[   15.519036@3] vout_serve: vmode set to 1080p60hz
[   15.519051@3] vout_serve: disable HDMI PHY as soon as possible
[   15.519055@3] fb: current vmode=null, cmd: 0x50000
[   15.519060@3] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
[   15.519063@3] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
[   15.519070@3] tv_vout: TV mode 1080p60hz selected.
[   15.519075@3]
[   15.519075@3] vdac_enable: on:0,module_sel:8
[   15.519085@3]
[   15.519085@3] vdac_enable: on:0,module_sel:8
[   15.519093@3] tv_vout: new mode =1080p60hz set ok
[   15.519096@3] vout_serve: vinfo mode is: 1080p60hz
[   15.519099@3] vout_serve: new mode 1080p60hz set ok
[   15.519112@3] hdmitx: video: get current mode: 1080p60hz
[   15.519115@3] hdmitx: update rx hdr info 0
[   15.519118@3] hdmitx: update physcial size: 1020 570
[   15.519154@3] hdmitx: system: already init VIC = 0  Now VIC = 16
[   15.521166@3] hdmitx: ddc rd8b error 0x54 0x01
[   15.523178@3] hdmitx: ddc rd8b error 0x54 0x01
[   15.523185@3] hdmitx: system: hdmirx version is 1.4 or below
[   15.523188@3] hdmitx div40: 0
[   15.550342@3] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[   15.550346@3] hdmitx: system: set pll VIC:16
[   15.550349@3] hdmitx: set clk: VIC = 16  cd = 4  frac_rate = 0
[   15.550357@3] config HPLL = 2970000
[   15.550421@3] HPLL: 0x4800023d
[   15.550424@3] config HPLL done
[   15.550430@3] set_hpll_od3_clk_div[825] div = 6
[   15.550436@3] j = 4  vid_clk_div = 1
[   15.550638@0] hdmitx: system: irq 80000001
[   15.550654@0] Start = 0x10000100   End = 0x100001ff
[   15.550664@0] [0x10000104]: 0x00000001
[   15.550821@0] [0x10000180]: 0x000000ff
[   15.550825@0] [0x10000181]: 0x000000ff
[   15.550829@0] [0x10000182]: 0x00000003
[   15.550833@0] [0x10000183]: 0x00000007
[   15.550837@0] [0x10000184]: 0x0000003f
[   15.550841@0] [0x10000185]: 0x00000002
[   15.550847@0] [0x10000187]: 0x000000ff
[   15.550851@0] [0x10000188]: 0x00000003
[   15.562346@3] hdmitx: ddc w1b error 0x54 0x20 0x00
[   15.564356@3] hdmitx: ddc w1b error 0x54 0x20 0x00
[   15.566365@3] hdmitx: ddc rd8b error 0x54 0x21
[   15.566370@3] hdmitx20: rx scrambler status is not ok
[   15.686407@3] Sink is HDMI device
[   15.686442@3] hdmitx: system: packet: can't get vendor data
[   15.686464@3] 1080p60hz 60 1
[   15.686485@3] 1080p60hz 60 1
[   15.686503@3] hdmtix: set audio
[   15.686531@3] hdmitx tx_aud_src = 0
[   15.686591@3] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[   15.686609@3] hdmitx aud_n_para = 6144
[   15.686751@3] fb: current vmode=1080p60hz, cmd: 0x10000
[   15.700268@3] fb: osd_open index=0,open_count=2
[   15.700327@3] fb: osd_release now.index=0,open_count=2
[   15.700559@3] fb: osd_set_free_scale_enable_hw
[   15.716962@3] fb: osd_set_free_scale_enable_hw
[   15.921693@1] vout_serve: vmode set to null
[   15.921731@1] vout_serve: disable HDMI PHY as soon as possible
[   15.921738@1] fb: current vmode=1080p60hz, cmd: 0x50000
[   15.921747@1] tv_vout: tv_set_current_vmode[930]fps_target_mode=88
[   15.921752@1] tv_vout: mode is 88,sync_duration_den=1,sync_duration_num=60
[   15.921764@1] tv_vout: 3Invalid video output modes.
[   15.921768@1] tv_vout: new mode =null set ok
[   15.921771@1] vout_serve: vinfo mode is: null
[   15.921774@1] vout_serve: new mode null set ok
[   15.921784@1] hdmitx: edid: not find mapped vic
[   15.921790@1] hdmitx: video: get current mode: null
[   15.921794@1] hdmitx: update physcial size: 1020 570
[   15.921798@1] hdmitx: video: null not valid hdmi mode
[   15.921822@1] fb: current vmode=null, cmd: 0x10000
[   15.933516@0] hdmitx: set frac_rate_policy as 0
[   15.933536@0] vout_serve: vmode set to 1080p60hz
[   15.933554@0] vout_serve: disable HDMI PHY as soon as possible
[   15.933558@0] fb: current vmode=null, cmd: 0x50000
[   15.933564@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
[   15.933568@0] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
[   15.933577@0] tv_vout: TV mode 1080p60hz selected.
[   15.933582@0]
[   15.933582@0] vdac_enable: on:0,module_sel:8
[   15.933592@0]
[   15.933592@0] vdac_enable: on:0,module_sel:8
[   15.933600@0] tv_vout: new mode =1080p60hz set ok
[   15.933604@0] vout_serve: vinfo mode is: 1080p60hz
[   15.933607@0] vout_serve: new mode 1080p60hz set ok
[   15.933621@0] hdmitx: video: get current mode: 1080p60hz
[   15.933624@0] hdmitx: update rx hdr info 0
[   15.933627@0] hdmitx: update physcial size: 1020 570
[   15.933663@0] hdmitx: system: already init VIC = 0  Now VIC = 16
[   15.935676@0] hdmitx: ddc rd8b error 0x54 0x01
[   15.937686@0] hdmitx: ddc rd8b error 0x54 0x01
[   15.937691@0] hdmitx: system: hdmirx version is 1.4 or below
[   15.937695@0] hdmitx div40: 0
[   15.960347@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[   15.960351@0] hdmitx: system: set pll VIC:16
[   15.960355@0] hdmitx: set clk: VIC = 16  cd = 4  frac_rate = 0
[   15.960362@0] config HPLL = 2970000
[   15.960425@0] HPLL: 0x4800023d
[   15.960428@0] config HPLL done
[   15.960434@0] set_hpll_od3_clk_div[825] div = 6
[   15.960441@0] j = 4  vid_clk_div = 1
[   15.970458@0] hdmitx: system: irq 80000001
[   15.972352@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[   15.972465@0] hdmitx: system: irq 80000001
[   15.974362@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[   15.974475@0] hdmitx: system: irq 80000001
[   15.976371@0] hdmitx: ddc rd8b error 0x54 0x21
[   15.976376@0] hdmitx20: rx scrambler status is not ok
[   15.976394@0] Start = 0x10000100   End = 0x100001ff
[   15.976404@0] [0x10000104]: 0x00000001
[   15.976561@0] [0x10000180]: 0x000000ff
[   15.976565@0] [0x10000181]: 0x000000ff
[   15.976569@0] [0x10000182]: 0x00000003
[   15.976573@0] [0x10000183]: 0x00000007
[   15.976577@0] [0x10000184]: 0x0000003f
[   15.976582@0] [0x10000185]: 0x00000002
[   15.976587@0] [0x10000187]: 0x000000ff
[   15.976591@0] [0x10000188]: 0x00000003
[   16.092380@0] hdmitx: system: irq 80000001
[   16.096374@0] Sink is HDMI device
[   16.096393@0] hdmitx: system: packet: can't get vendor data
[   16.096405@0] 1080p60hz 60 1
[   16.096416@0] 1080p60hz 60 1
[   16.096426@0] hdmtix: set audio
[   16.096443@0] hdmitx tx_aud_src = 0
[   16.096481@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[   16.096490@0] hdmitx aud_n_para = 6144
[   16.096597@0] Start = 0x10000100   End = 0x100001ff
[   16.096615@0] [0x10000104]: 0x00000001
[   16.096821@0] [0x10000180]: 0x000000ff
[   16.096831@0] [0x10000181]: 0x000000ff
[   16.096841@0] [0x10000182]: 0x00000003
[   16.096851@0] [0x10000183]: 0x00000007
[   16.096861@0] [0x10000184]: 0x0000003f
[   16.096871@0] [0x10000185]: 0x00000002
[   16.096883@0] [0x10000187]: 0x000000ff
[   16.096893@0] [0x10000188]: 0x00000003
[   16.097100@0] fb: current vmode=1080p60hz, cmd: 0x10000
[   16.110166@0] fb: osd_open index=0,open_count=2
[   16.110200@0] fb: osd_release now.index=0,open_count=2
[   16.110311@0] fb: osd_set_free_scale_enable_hw
[   16.126832@0] fb: osd_set_free_scale_enable_hw
[   19.240370@0] tx queueing
[   19.370633@0] audio_dsp: buf=0
[   19.370638@0] audio_dsp: IEC958_mode_raw=0
[   20.139064@2] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc061372600 status=-104
[   20.139064@2]
[   25.043375@2] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc061372600 status=-104
[   25.043375@2]
[   25.240402@0] tx queueing
[   26.936886@2] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc061372600 status=-104
[   26.936886@2]
[   31.891194@2] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc061373c00 status=-104
[   31.891194@2]
[   33.240408@2] tx queueing
[   41.240369@2] tx queueing
[   51.240303@0] tx queueing


The kodi system audio settings also have set both 'passthrough output device' and 'audio output device' to 'ALSA: USB PNP SOUND device, S/PDIF'

kodi_audio.log



2) The second problem I have is that i watch TV withe the PVR plugin for VU+/Enigma, which i installed via the addons repository of Kodi. After configuring the credentials to access the web interface of my Enigma box all the bouquets are synced successfully, but there is no streaming/video playback.
"One or more items failed to play Check the log for more information about this message"
kodi_pvr.log


I attached a kodi crash log as well as the kodi_audio.log and kodi_pvr.log file.
kodi_crashlog_20180326195800.log


Can anybod help me to solve those issues ?

Thanks

Drizzt



does nobody have a hint for me ?
nqdrizzt
 
Posts: 8
Joined: Sat Apr 29, 2017 1:47 am
languages_spoken: english
ODROIDs: XU3Lite

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby plikmuny » Fri Apr 06, 2018 1:42 am

rooted wrote:
plikmuny wrote:Is there a new build available for c2? I see lot of development /improvement going on on other devises. But for c2 it is like stagnant from the past many days....
Is there a new build coming out soon with latest patches and updated Kernel?
http://releases.libreelec.tv/LibreELEC-Odroid_C2.aarch64-8.2.4.img.gz?mirrorlist

Thanks for this link. But there is no tar file to update from current version. is there a way to convert img to tar or should I wait for Raybuntu to upload tar image?
Can I update to this build from rb24 leia build without losing my addons and settings?
Is it better than rb24 build? Changelog available? Thanks in advance
plikmuny
 
Posts: 36
Joined: Tue Feb 06, 2018 3:26 am
languages_spoken: english
ODROIDs: Odroid C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby rooted » Fri Apr 06, 2018 3:31 am

plikmuny wrote:
rooted wrote:
plikmuny wrote:Is there a new build available for c2? I see lot of development /improvement going on on other devises. But for c2 it is like stagnant from the past many days....
Is there a new build coming out soon with latest patches and updated Kernel?
http://releases.libreelec.tv/LibreELEC-Odroid_C2.aarch64-8.2.4.img.gz?mirrorlist

Thanks for this link. But there is no tar file to update from current version. is there a way to convert img to tar or should I wait for Raybuntu to upload tar image?
Can I update to this build from rb24 leia build without losing my addons and settings?
Is it better than rb24 build? Changelog available? Thanks in advance
No changelog, build date is 2018-03-13 18:35

Direct link to upgrade tar:

http://www.gtlib.gatech.edu/pub/LibreEL ... -8.2.4.tar
User avatar
rooted
 
Posts: 4914
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby cdu13a » Fri Apr 06, 2018 4:00 am

I don't know if its the upgrade you want, since its the latest 8.x release when Raybuntu's builds were pre releases of the 9.x release of LibreELEC.

If you read a little further back in the comments, Raybuntu stopped doing his builds, so until the LibreELEC project releases their official alpha builds, there is no new builds.
Which should not be to much longer a wait.

I do my own builds, and would have to say you are not missing any drastic improvements or new features by waiting, you wouldn't be able to tell a build from the last week from Raybuntu's last build.
cdu13a
 
Posts: 39
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby plikmuny » Fri Apr 06, 2018 5:02 am

rooted wrote:
plikmuny wrote:
rooted wrote:
plikmuny wrote:Is there a new build available for c2? I see lot of development /improvement going on on other devises. But for c2 it is like stagnant from the past many days....
Is there a new build coming out soon with latest patches and updated Kernel?
http://releases.libreelec.tv/LibreELEC-Odroid_C2.aarch64-8.2.4.img.gz?mirrorlist

Thanks for this link. But there is no tar file to update from current version. is there a way to convert img to tar or should I wait for Raybuntu to upload tar image?
Can I update to this build from rb24 leia build without losing my addons and settings?
Is it better than rb24 build? Changelog available? Thanks in advance
No changelog, build date is 2018-03-13 18:35

Direct link to upgrade tar:

http://www.gtlib.gatech.edu/pub/LibreEL ... -8.2.4.tar

Which device tree blob to use with this image? Without blob it fails to upgrade
plikmuny
 
Posts: 36
Joined: Tue Feb 06, 2018 3:26 am
languages_spoken: english
ODROIDs: Odroid C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby Raybuntu » Fri Apr 06, 2018 11:59 pm

My builds will be continued as CoreELEC soon.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby DoughMucker » Sat Apr 07, 2018 5:55 am

Holy fork. Is this where the aml magic is going to happen?
DoughMucker
 
Posts: 32
Joined: Fri Nov 18, 2016 2:08 pm
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby rooted » Sat Apr 07, 2018 6:29 am

Raybuntu wrote:My builds will be continued as CoreELEC soon.
Thanks Raybuntu, I see you have four other devs...nice.
User avatar
rooted
 
Posts: 4914
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby jesusrp » Sun Apr 08, 2018 4:31 am

Many thanks Raybuntu, for a very very strange reason the ssh connection has stopped working for me (root/libreelec), the only thing I´ve done is to configure samba access. How can I enable ssh login?

Thank you.
jesusrp
 
Posts: 94
Joined: Mon May 02, 2016 9:55 pm
languages_spoken: english

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby MagicDude4Eva » Sun Apr 08, 2018 9:53 pm

Raybuntu wrote:My builds will be continued as CoreELEC soon.


Thanks for all the great work. I wanted to check if there is an upgrade for rb-leia24 on Odroid-C2 and almost had a panic-attack when I saw your Github repo being archived.

What should rb-leia24 users like myself do? Wait for CoreElec release and then upgrade or switch to LibreElec. TBH, right now there is no reason to do anything on my part as everything works fine. Can you just confirm that this is the correct project: https://github.com/CoreELEC/CoreELEC/releases

BTW: It would be helpful, to perhaps update your archived Github project with some note/info regarding the direction forward.
User avatar
MagicDude4Eva
 
Posts: 8
Joined: Wed Jan 18, 2017 4:33 am
Location: Johannesburg
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby spaceman_spiff » Tue Apr 10, 2018 4:48 pm

Is there a source to download the final .tar and .img.gz of rb-leia24? I'd like to give it a try, but I can't find the .tar files anymore and I'm not sure how to create them myself from Github?
spaceman_spiff
 
Posts: 26
Joined: Sun Dec 25, 2016 7:29 pm
languages_spoken: english
ODROIDs: Odroid C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby jesusrp » Tue Apr 10, 2018 5:18 pm

spaceman_spiff wrote:Is there a source to download the final .tar and .img.gz of rb-leia24? I'd like to give it a try, but I can't find the .tar files anymore and I'm not sure how to create them myself from Github?

+1
jesusrp
 
Posts: 94
Joined: Mon May 02, 2016 9:55 pm
languages_spoken: english

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby DoogyRev » Wed Apr 11, 2018 3:44 am

Will CoreELEC builds have the gpioplug-ir-recv and options module included?
DoogyRev
 
Posts: 3
Joined: Thu Feb 08, 2018 6:39 am
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby spaceman_spiff » Thu Apr 12, 2018 4:15 am

jesusrp wrote:
spaceman_spiff wrote:Is there a source to download the final .tar and .img.gz of rb-leia24? I'd like to give it a try, but I can't find the .tar files anymore and I'm not sure how to create them myself from Github?

+1


Raybuntu has kindly reposted rb-leia24 https://mega.nz/#F!5x5GiBTY!Heghu-GsNf3KejfCg2xRpQ with the following caveat:
Be aware that addons are still hosted on LE infrastructure. I can't guarantee that they will remain there although, so you should upgrade to official LibreELEC 9 alpha once it's released.
spaceman_spiff
 
Posts: 26
Joined: Sun Dec 25, 2016 7:29 pm
languages_spoken: english
ODROIDs: Odroid C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby DoogyRev » Thu Apr 12, 2018 7:11 pm

Could you post the last build that has the gpioplug module and options working correctly, please? My install has suddenly stopped running add ons of any description including the LIBREELEC settings and I'd like to start over. I'm not sure if 8.2.3.1 had it but I know rb-krypton18 did. It isn't included in rb-leia24 and I'm having extreme difficulty compiling them from the sources.
DoogyRev
 
Posts: 3
Joined: Thu Feb 08, 2018 6:39 am
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby legómina » Sat Apr 14, 2018 6:05 pm

legómina
 
Posts: 15
Joined: Tue Mar 29, 2016 3:57 pm
languages_spoken: polish, english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby jesusrp » Sun Apr 15, 2018 6:19 pm

Thank you @spaceman_spiff, @legómina and @Raybuntu

As per Libreelec wiki (https://wiki.libreelec.tv/compile) for compiling for odroid we have to use this command:

PROJECT=Amlogic DEVICE=Odroid_C2 ARCH=arm make image

>Iḿ compiling in the Odroid C2 directly and it throws:
gcc: error: unrecognized command line option '-m64'
make[2]: *** [<builtin>: cryptlib.o] Error 1
make[2]: Leaving directory '/home/odroid/Desktop/CoreElec/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/openssl-1.0.2o/.aarch64-linux-gnu/crypto'
make[1]: *** [Makefile:287: build_crypto] Error 1
make[1]: Leaving directory '/home/odroid/Desktop/CoreElec/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/openssl-1.0.2o/.aarch64-linux-gnu'
Makefile:12: recipe for target 'image' failed
make: *** [image] Error 2
jesusrp
 
Posts: 94
Joined: Mon May 02, 2016 9:55 pm
languages_spoken: english

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby rooted » Sun Apr 15, 2018 11:12 pm

jesusrp wrote:Thank you @spaceman_spiff, @legómina and @Raybuntu

As per Libreelec wiki (https://wiki.libreelec.tv/compile) for compiling for odroid we have to use this command:

PROJECT=Amlogic DEVICE=Odroid_C2 ARCH=arm make image

>Iḿ compiling in the Odroid C2 directly and it throws:
gcc: error: unrecognized command line option '-m64'
make[2]: *** [<builtin>: cryptlib.o] Error 1
make[2]: Leaving directory '/home/odroid/Desktop/CoreElec/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/openssl-1.0.2o/.aarch64-linux-gnu/crypto'
make[1]: *** [Makefile:287: build_crypto] Error 1
make[1]: Leaving directory '/home/odroid/Desktop/CoreElec/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/openssl-1.0.2o/.aarch64-linux-gnu'
Makefile:12: recipe for target 'image' failed
make: *** [image] Error 2
Seems you are compiling on a 32bit OS?
User avatar
rooted
 
Posts: 4914
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby cdu13a » Sun Apr 15, 2018 11:52 pm

I remember seeing that error first time I compiled LibreELEC. I know it compiles on a 32-bit machine however because I have an HC1 making nightly build images for the C2.

The following all have either x86_64 hard coded or some other form of use/enable 64bit in their configure_host()

CoreELEC.tv/packages/security/openssl/package.mk
CoreELEC.tv/packages/security/nss/package.mk
CoreELEC.tv/packages/security/nspr/package.mk

If that is not enough info for you to get past the problem yourself, I can give you exact changes to make.
cdu13a
 
Posts: 39
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby dynek » Mon Apr 16, 2018 3:43 pm

Thanks a bunch Raybuntu for all your great work!
Last edited by dynek on Mon Apr 16, 2018 11:17 pm, edited 1 time in total.
dynek
 
Posts: 4
Joined: Wed Apr 06, 2016 8:20 pm
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby Raybuntu » Mon Apr 16, 2018 7:53 pm

I'm sorry guys for being away. Somehow I didn't get any email notifications for the odroid forum anymore:

https://github.com/CoreELEC/CoreELEC/re ... tag/8.90.0

Our First official Core 9 alpha 1 release.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby danielfmo » Mon Apr 16, 2018 8:00 pm

Raybuntu wrote:I'm sorry guys for being away. Somehow I didn't get any email notifications for the odroid forum anymore:

https://github.com/CoreELEC/CoreELEC/re ... tag/8.90.0

Our First official Core 9 alpha 1 release.


Hello Raybuntu,

Thank you once more for you great work!

Can you please give us some words on what should we expect from this release? Like, main differences from your previous Leia builds, something known to be not working?
Otherwise it will be difficult to give any good feedback...

Cheers
danielfmo
 
Posts: 59
Joined: Tue Mar 28, 2017 6:35 pm
languages_spoken: english
ODROIDs: ODROID-C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby Raybuntu » Mon Apr 16, 2018 8:11 pm

Overall Playback seems better I'd say. I have been testing it for 3 Days. Kodi is still Alpha so expect bugs. CEC wakeup works again for me. We have a few AML devs now and especially the work from afl1 for LiveTV/DVB is great.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby danielfmo » Mon Apr 16, 2018 8:26 pm

Raybuntu wrote:Overall Playback seems better I'd say. I have been testing it for 3 Days. Kodi is still Alpha so expect bugs. CEC wakeup works again for me. We have a few AML devs now and especially the work from afl1 for LiveTV/DVB is great.


Thank you,

Will try ASAP.

Should I expect to be able to import a backup from Leia24 build?

Thank you
danielfmo
 
Posts: 59
Joined: Tue Mar 28, 2017 6:35 pm
languages_spoken: english
ODROIDs: ODROID-C2

Re: CoreELEC

Unread postby Raybuntu » Mon Apr 16, 2018 8:30 pm

You should be able to just tar update. Core is compatible with LE.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby dynek » Mon Apr 16, 2018 9:21 pm

Successfully updated to CoreElec 8.90 - Great stuff!
dynek
 
Posts: 4
Joined: Wed Apr 06, 2016 8:20 pm
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby Pienoet » Tue Apr 17, 2018 1:54 am

Raybuntu wrote:Overall Playback seems better I'd say. I have been testing it for 3 Days. Kodi is still Alpha so expect bugs. CEC wakeup works again for me. We have a few AML devs now and especially the work from afl1 for LiveTV/DVB is great.


Hi Raybuntu good to be back!

I just upgrade with alpha1 on my odroid C2 and did some test with live tv and if i zap to anotjer channel it’s zapping into a black screen just like lei24.

Are you aware of this issue?
Are there any improvements for c2 with live tv?

Thank you for alpha1 i’ll do some more testing.
Keep up the good work!
Pienoet
 
Posts: 384
Joined: Sun May 10, 2015 10:04 pm
languages_spoken: english Dutch

Re: CoreELEC

Unread postby Raybuntu » Tue Apr 17, 2018 2:42 am

There is some issue afl1 is working on. Could be related and will be fixed alpha 2
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby Pienoet » Tue Apr 17, 2018 2:43 am

Raybuntu wrote:There is some issue afl1 is working on. Could be related and will be fixed alpha 2


Thank you!

btw live tv playback is has a big improvement ;)
Pienoet
 
Posts: 384
Joined: Sun May 10, 2015 10:04 pm
languages_spoken: english Dutch

Re: CoreELEC

Unread postby EarBiteR » Tue Apr 17, 2018 9:25 am

Hi, I pushed CoreELEC-Odroid_C2.arm-8.90.0.tar up to my C2 running 8.2.3.1-C2 (S905.arm) and rebooted and during reboot(upgrade) it said it wasnt compatible with my hardware? I thought I saw that it is an upgrade to LE?

Do I need to be on a different version? Or should I install a new image?

Thanks.
EarBiteR
 
Posts: 11
Joined: Wed Mar 18, 2015 12:13 pm
languages_spoken: english
ODROIDs: C2 running libre-elec

Re: CoreELEC

Unread postby Raybuntu » Tue Apr 17, 2018 3:11 pm

EarBiteR wrote:Hi, I pushed CoreELEC-Odroid_C2.arm-8.90.0.tar up to my C2 running 8.2.3.1-C2 (S905.arm) and rebooted and during reboot(upgrade) it said it wasnt compatible with my hardware? I thought I saw that it is an upgrade to LE?

Do I need to be on a different version? Or should I install a new image?

Thanks.


You seem to use Kszaq build. You have to create the nocompat file to upgrade. Please make a backup just in case:

Code: Select all
touch /storage/.update/.nocompat
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby ripoyet » Fri Apr 20, 2018 7:30 am

Raybuntu wrote:I'm sorry guys for being away. Somehow I didn't get any email notifications for the odroid forum anymore:

https://github.com/CoreELEC/CoreELEC/re ... tag/8.90.0

Our First official Core 9 alpha 1 release.

Thanks for the new update to Core Elec. I hope that soon we will have one Alpha 2 or Beta of Kodi. Thanks for all again.
ripoyet
 
Posts: 4
Joined: Tue Oct 11, 2016 5:08 pm
languages_spoken: english, spanish
ODROIDs: Odroid C2

Re: CoreELEC

Unread postby danielfmo » Sun Apr 22, 2018 9:51 pm

Hello Raybuntu,

Thank you once again for the great work! I've just tried the 8.90.1 up date and it works flawlessly after upgrading from Leia20. Though I notice a significant slower fast-forward, meaning, with leia20 fast-forwarding 30 seconds was fast, with CoreElec it takes about 2 seconds to resume playback. Nothing critical! It is the only thing that I notice that is different.

Another great news, for me at least, is that the addons that I've build for Leia20 still work on CoreELEC without the need to recompile them.

Now, I would like to ask for your help, since leia20 that I'm not able to build the addon Hyperion.ng, I know that you don't support it anymore but I would appreciate a few hints on how to fix the build if you have any idea.
The issue is that I'm not able to statically link the avahi libs:

Code: Select all
FAILED: bin/hyperion-aml
: && /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/bin/armv8a-libreelec-linux-gnueabi-g++  -march=armv8-a+crc -mabi=aapcs-linux -Wno-psabi -Wa,-mno-warn-deprecated -mcpu=cortex-a53 -mfloat-abi=hard -mfpu=neon-fp-armv8 -fomit-frame-pointer -Wall -pipe -Os  -flto -ffat-lto-objects -Wall -std=c++11 -O3 -DNDEBUG  -march=armv8-a+crc -mtune=cortex-a53 -Wl,--as-needed -fuse-linker-plugin -flto -fuse-ld=gold   -rdynamic src/hyperion-aml/CMakeFiles/hyperion-aml.dir/hyperion-aml.cpp.o src/hyperion-aml/CMakeFiles/hyperion-aml.dir/AmlogicWrapper.cpp.o src/hyperion-aml/CMakeFiles/hyperion-aml.dir/hyperion-aml_autogen/mocs_compilation.cpp.o  -o bin/hyperion-aml  -Wl,-rpath,"\$ORIGIN/../lib" lib/libeffectengine.a lib/libcommandline.a lib/libblackborder.a lib/libhyperion-utils.a lib/libprotoserver.a lib/libamlogic-grabber.a lib/libframebuffer-grabber.a /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5Core.a /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5Gui.a /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5Network.a -lprotobuf lib/libeffectengine.a lib/libblackborder.a lib/libhyperion-utils.a lib/libhyperion.a lib/libleddevice.a lib/libbonjour.a lib/libeffectengine.a lib/libblackborder.a lib/libhyperion-utils.a lib/libhyperion.a lib/libleddevice.a lib/libbonjour.a -lpython3.6 /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5Gui.a -Wl,-Bstatic -lpng /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5SerialPort.a lib/libhidapi-libusb.a -Wl,-Bdynamic -lpthread -lusb-1.0 /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5Network.a /home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/armv8a-libreelec-linux-gnueabi/sysroot/usr/lib/libQt5Core.a -Wl,-Bstatic -ldns_sd -lavahi-client -lavahi-common -lavahi-core -Wl,-Bdynamic -ldbus-1 -lpthread -lpcre16 -ldl -lz && :
/home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/lib/gcc/armv8a-libreelec-linux-gnueabi/7.3.0/../../../../armv8a-libreelec-linux-gnueabi/bin/ld.gold: error: cannot find -ldns_sd
/home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/lib/gcc/armv8a-libreelec-linux-gnueabi/7.3.0/../../../../armv8a-libreelec-linux-gnueabi/bin/ld.gold: error: cannot find -lavahi-client
/home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/lib/gcc/armv8a-libreelec-linux-gnueabi/7.3.0/../../../../armv8a-libreelec-linux-gnueabi/bin/ld.gold: error: cannot find -lavahi-common
/home/ubuntu/GitHubLocal/CoreELEC/build.CoreELEC-Odroid_C2.arm-9.0-devel/toolchain/lib/gcc/armv8a-libreelec-linux-gnueabi/7.3.0/../../../../armv8a-libreelec-linux-gnueabi/bin/ld.gold: error: cannot find -lavahi-core


Thank you in advance
danielfmo
 
Posts: 59
Joined: Tue Mar 28, 2017 6:35 pm
languages_spoken: english
ODROIDs: ODROID-C2

Re: CoreELEC

Unread postby DoogyRev » Sat Apr 28, 2018 2:00 am

Can the gpioplug-ir-recv module be included in CoreELEC?
DoogyRev
 
Posts: 3
Joined: Thu Feb 08, 2018 6:39 am
languages_spoken: english
ODROIDs: C2

Re: LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs

Unread postby spaceman_spiff » Wed May 02, 2018 8:28 pm

Raybuntu wrote:Overall Playback seems better I'd say. I have been testing it for 3 Days. Kodi is still Alpha so expect bugs. CEC wakeup works again for me. We have a few AML devs now and especially the work from afl1 for LiveTV/DVB is great.


I noted the issue with CEC not waking up which I thought was an issue unique to me. I used to be able to get it to work by sending ActivateWindow (Home), but that was just something I discovered through trial and error and it ceased working for me when I went to your final pre CoreELECE Leia build so I'll upgrade now as that is the only bug that was causing me issues for regular usage.

However...

What is the preferred method / signal / command to perform a CEC wakeup?
spaceman_spiff
 
Posts: 26
Joined: Sun Dec 25, 2016 7:29 pm
languages_spoken: english
ODROIDs: Odroid C2

Re: CoreELEC

Unread postby Raybuntu » Wed May 02, 2018 8:42 pm

The TV can send various commands. Uboot supports a few. I patched in LG support a year ago with some help of a user from here.
For me CEC wakeup works again. But we are talking off ---> on. Suspend or hibernate is not working for me.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby miweimann » Thu May 03, 2018 2:13 am

Hi, i tried today your CoreElec Image (8.90.0) and it´s working nearly fine for me. I use a Harmony remote within Kodi. Now a have updated to ( 8.90.1) and the remote dosn´t run anymore. When i get back to ( 8.90.0 ) it run again. Is there any hint , what i Can do, because i want to use Sky Ticket, which stops after 10 min in ( 8.90.0), but is ok in ( 8.90.1)

many greatings Michael
miweimann
 
Posts: 9
Joined: Wed Aug 24, 2016 4:34 pm
languages_spoken: english, german
ODROIDs: C2

Re: CoreELEC

Unread postby Raybuntu » Thu May 03, 2018 2:57 am

I figured you are german, check out kodinerds forum it's a german speaking forum and I offer German Support over there. The Kodi version used in 8.90.1 has a bug. Lirc is not working with Amlogic boxes. This was fixed yesterday and 8.90.2 will have a working remote again.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby jesusrp » Sat May 05, 2018 3:36 pm

Thank you for the great work.

I changed to CoreElec from leia version and now I´m experiencing troubles with CrazyCat drivers and TVheadend server.

I have an USB DVB-T2 styck (Mygica T230C) with Leia builds it was recognized as a DVB-T and DVB-T2 device and worked like charm, not with CoreElec it is recognized just as DVB-T device and no channel is detected.

How can I know what is happening?
jesusrp
 
Posts: 94
Joined: Mon May 02, 2016 9:55 pm
languages_spoken: english

Re: CoreELEC

Unread postby EarBiteR » Mon May 14, 2018 7:39 am

Raybuntu,

thanks for your help earlier. I ended up flashing a new 8.90.0 img as the upgrade from kszaq failed after the trying with nocompat. It would boot and just hang. CoreElec works great!

I wanted to mention my latest issues on Odroid-C2 - I was running 8.90.0 and updated to .2 and it would no longer play any of my video files. I then reverted to .1 and then video was fine but it was turning off the C2 when I shutdown the system via remote control (harmony 650). I do have CEC disabled. Moving from Kszaq's LE to your CoreElec had fixed that for me!

Looking at the logs I see a couple warnings and an error from when the video play failed:

14:56:48.201 T:3828753280 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer
15:18:55.599 T:4002411392 WARNING: Previous line repeats 30 times.
15:18:55.644 T:3803214720 ERROR: Got MSGQ_ABORT or MSGO_IS_ERROR return true

Should I be posting this on the Kodi forums? I read there that some of their updates were supposed to turn off the heartbeat lights (on Odroids) but I never saw that happen.

Thanks
EarBiteR
 
Posts: 11
Joined: Wed Mar 18, 2015 12:13 pm
languages_spoken: english
ODROIDs: C2 running libre-elec

Re: CoreELEC

Unread postby lexxa » Sat May 19, 2018 7:32 pm

I am having issues with CEC
Lately I switched my FHD Samsung TV for a 4K UHD one (TCL Xess X2)
The Samsung was working with any *ELEC flawlessly and CEC was OK out of the box without any alterations.
The new TCL TV is acting weird.
First it sends out only the Play,Pause,Stop key presses. I thought this is a poor implementation of the CEC protocol.
However, recently I found out there is this feature Guide Menu under CEC (T-Link based on TCL's marketing). Once this feature is enabled I see a visual guide on the screen and all the key presses are passed to CoreELEC (latest version).
The same issue has been described here ( https://forum.kodi.tv/showthread.php?ti ... pid1768882 )
Could someone guide me please how should I gather troubleshooting logs in order to get this one fixed eventually?
Quite frankly I am rather OK with the shell but never had the chance to learn how to properly use the ceclient binary.

Any advice would be more than appreciated
lexxa
 
Posts: 11
Joined: Thu Apr 21, 2016 4:00 pm
languages_spoken: english
ODROIDs: ODROID-C2

Re: CoreELEC

Unread postby spaceman_spiff » Sat Jun 02, 2018 11:06 am

Well, I'm still having problems with waking up my CEC after periods of inactivity. Usually I come home from work, fire up the TV/Kodi to watch something and I can't get CEC to respond even if I send some of the commands that seemed to work back in with the Raybuntu LE Krypton versions. It still responds to IR commands so I switch my Harmony remote to sending IR commands, reboot CoreElec and CEC works again just fine through the evening. I turn everything off and the next day it's the same thing again.

On an unrelated note, I've noticed I'm getting occasional audio sync issues. Rebooting seems to resolve it. If I have to adjust the audio sync I used have to go to -0.100 to -0.125ms to get it in sync. It the problem seems intermittent though. Anyone experience any audio sync issues?
spaceman_spiff
 
Posts: 26
Joined: Sun Dec 25, 2016 7:29 pm
languages_spoken: english
ODROIDs: Odroid C2

Re: CoreELEC

Unread postby rooted » Sat Jun 02, 2018 11:20 am

spaceman_spiff wrote:Well, I'm still having problems with waking up my CEC after periods of inactivity. Usually I come home from work, fire up the TV/Kodi to watch something and I can't get CEC to respond even if I send some of the commands that seemed to work back in with the Raybuntu LE Krypton versions. It still responds to IR commands so I switch my Harmony remote to sending IR commands, reboot CoreElec and CEC works again just fine through the evening. I turn everything off and the next day it's the same thing again.

On an unrelated note, I've noticed I'm getting occasional audio sync issues. Rebooting seems to resolve it. If I have to adjust the audio sync I used have to go to -0.100 to -0.125ms to get it in sync. It the problem seems intermittent though. Anyone experience any audio sync issues?
Both of these are Kodi issues, I get the same thing on a Pi 3.

Not so much the audio (lately) but I have the exact same issue with CEC.
User avatar
rooted
 
Posts: 4914
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby lexxa » Sat Jun 02, 2018 6:34 pm

rooted wrote:Both of these are Kodi issues, I get the same thing on a Pi 3.

Not so much the audio (lately) but I have the exact same issue with CEC.



Should I persume that downgrading to Kodi 17 should resolve this issue?
Also how Kodi interacts with the CEC API? I am running cec-client in ssh and during key presses i see no key events.
lexxa
 
Posts: 11
Joined: Thu Apr 21, 2016 4:00 pm
languages_spoken: english
ODROIDs: ODROID-C2

Re: CoreELEC

Unread postby Raybuntu » Sat Jun 02, 2018 9:50 pm

I have no issues with either my Samsung TV or my LG OLED. C2 turns on when TV is turned on or if I set the source to the C2.
BTC: 12zLUYC7JzwM7a8cQKekAvZr9kWxjzTfxm
Raybuntu
 
Posts: 1245
Joined: Mon Nov 30, 2015 4:23 pm
languages_spoken: english, german
ODROIDs: C1+, C2

Re: CoreELEC

Unread postby rooted » Sun Jun 03, 2018 1:22 am

Raybuntu wrote:I have no issues with either my Samsung TV or my LG OLED. C2 turns on when TV is turned on or if I set the source to the C2.
I have the issue when I press a button on the remote to my Roku which switches the inputs to it, when I switch back I have to go into the TV CEC settings and press connect which reconnects to the Pi 3. I mean technically it's a libcec issue but since it is running LibreELEC it becomes a LE/Kodi issue.

Also when I leave the device idle for too long and the dim screensaver kicks in, often CEC fails to work here as well.
User avatar
rooted
 
Posts: 4914
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)

Re: CoreELEC

Unread postby cdu13a » Sat Jun 09, 2018 2:57 am

Upgrade to CoreELEC 8.90.3 from CoreELEC 8.90.0 fails at Starting Journal Service.

P_20180608_134449.jpg
P_20180608_134449.jpg (270.87 KiB) Viewed 309 times
cdu13a
 
Posts: 39
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, XU4, HC1

PreviousNext

Return to LibreELEC - Kodi Project for C1/C2

Who is online

Users browsing this forum: No registered users and 2 guests