Enigma2 on Odroid C2

by **andyblac** » Fri Jan 06, 2017 8:19 am

algdu83 wrote:we have created a img with this method
http://www.microdev.it/wp/en/2016/08/17 ... mpilation/

juste change a last with
MACHINE=wetekplay2 DISTRO=openatv make image

just tried that, flashed to SDCARD, it does not boot my C2, and serial log does not even show it trying to boot

just get.
GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP

by **algdu83** » Fri Jan 06, 2017 5:23 pm

andyblac wrote:
algdu83 wrote:we have created a img with this method
http://www.microdev.it/wp/en/2016/08/17 ... mpilation/

juste change a last with
MACHINE=wetekplay2 DISTRO=openatv make image

just tried that, flashed to SDCARD, it does not boot my C2, and serial log does not even show it trying to boot

just get.
GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP

On the wetek play2 is boot...
You must change the boot files for odroid c2

by **andyblac** » Sat Jan 07, 2017 6:45 pm

ok, getting some where, I have a booting image with cobbled together odroid kernel and few bits from my other git (oe-alliance) I now have an issue I need a working e2-procfs, I tried the one from WeTec play2 but complains about magic version

Code: Select all: [ 326.027606] wetekdvb: version magic '3.14.29 SMP mod_unload aarch64' should be '3.14.29 SMP preempt mod_unload aarch64' root@odroidc2:~# modprobe e2-procfs modprobe: ERROR: could not insert 'e2_procfs': Exec format error root@odroidc2:~# uname -a Linux odroidc2 3.14.29 #1 SMP PREEMPT Sat Jan 7 02:40:24 CET 2017 aarch64 GNU/Linux root@odroidc2:~# modinfo wetekdvb filename: /lib/modules/3.14.29/extra/wetekdvb.ko license: Proprietary depends: vermagic: 3.14.29 SMP mod_unload aarch64 parm: adapter_nr:DVB adapter numbers (array of short) root@odroidc2:~# modinfo e2-procfs filename: /lib/modules/3.14.29/extra/e2-procfs.ko license: GPL author: Christian Ege description: procfs module with enigma2 support depends: vermagic: 3.14.29 SMP mod_unload aarch64 root@odroidc2:~#

as e2-procfs is GPL does anyone know source code is ?, if any would like to help me on this project I think Skype IM would be quicker, please pm me for me Skype ID.

I also noticed these anyone have any ideas ?

Code: Select all: [ 119.809162] fb: command 0x23 not supported (enigma2) [ 119.817952] fb: command 0x40014621 not supported (enigma2) [ 120.659881] fb: command 0x40014621 not supported (enigma2)

I have attached a full boot log of my image boot.
Andy.

by **taki** » Sun Jan 08, 2017 1:36 am

use fake e2procfs
https://github.com/gcsuri/meta-amlogic/ ... stb-procfs
and nimsocket

by **andyblac** » Sun Jan 08, 2017 8:26 am

taki wrote:use fake e2procfs
https://github.com/gcsuri/meta-amlogic/ ... stb-procfs
and nimsocket

does not work, I need a real procfs.

btw guys here is my work so far.

https://github.com/oe-alliance/oe-allia ... 124a8135b4

to test

clone the 4.0 branch from here

Code: Select all: git@github.com:oe-alliance/build-enviroment.git

and the do

Code: Select all: MACHINE=odroidc2 DISTRO=openvix make image

by **taki** » Sun Jan 08, 2017 7:40 pm

Who can write or decompile amlogic e2procfs.ko. otherhand nimdetec ?
I think enigma2 works on all amlogic devices. Wetek dev graugans wroto e2procfs for wetekplay.
Thanks for your efforts.

by **andyblac** » Sun Jan 08, 2017 8:36 pm

taki wrote:Who can write or decompile amlogic e2procfs.ko. otherhand nimdetec ?
I think enigma2 works on all amlogic devices. Wetek dev graugans wroto e2procfs for wetekplay.
Thanks for your efforts.

I am in talks with the guy who wrote the e2-procfs for wetek, trying to get him to help with Ordroid one, I'll keep you informed.

by **taki** » Mon Jan 09, 2017 12:03 am

http://www.wetekforums.com/v/index.php? ... lay-dvb-s2

Look this topic for how developed e2procfs

by **taki** » Mon Jan 09, 2017 3:27 am

Sti stb sources of e2procfs

http://dev.h1714512.stratoserver.net/cgi-bin/cgit.cgi/tdt/tree/tdt/cvs/driver/player2_179/linux/drivers/media/dvb/stm/dvb/e2_proc?id=059b0f7d12a3916c753adcb0abbedee9bcb1a3a0

by **taki** » Sun Jan 15, 2017 5:19 am

amlogic e2procfs some sources

by **taki** » Wed Jan 18, 2017 2:37 am

Other source of e2procfs sti

https://github.com/Raxone/STB8000/tree/ ... vb/e2_proc

by **andyblac** » Mon Jan 23, 2017 10:04 pm

guy's got some good news, I have contacted the guy who wrote the WeTek e2procfs and I have sent a him a C2, and he has agreed to code me a e2procfs for the C2, he is a busy man so please be patient, I will keep you all informed how it goes.

Andy.

by **taki** » Tue Jan 24, 2017 1:55 pm

That is good news but only rewrite for c2. Other amlogic box? (C1)

by **andyblac** » Sat Feb 04, 2017 7:07 pm

i only have a C2, and i had to supply the guy with C2 (out of my own pocket), also not sure if the C1 would have all the hardware required for E2 would it?

by **taki** » Sun Feb 05, 2017 3:44 pm

I compiled openav 6.0 and oe-alliance 4.0
Only problem dvbpart.

by **andyblac** » Wed Feb 08, 2017 12:19 am

taki wrote:I compiled openav 6.0 and oe-alliance 4.0
Only problem dvbpart.

yes, I did the work on the oe-a, got the c2 to boot, we are working on e2 drivers and other c2 optimisations in openivx, but as ATV is part of OE-Aliance they will also benefit from my coding.

by **taki** » Wed Feb 08, 2017 1:58 pm

andyblac where I find "enigma2-plugin-extensions-startkodi".
Oe alliance plugin has rcuselect and rezap

by **andyblac** » Wed Feb 08, 2017 9:51 pm

taki wrote:andyblac where I find "enigma2-plugin-extensions-startkodi".
Oe alliance plugin has rcuselect and rezap

in which dirstro ?, in openvix we don't build kodi for odroid as it is pretty useless.

as for RUslect and rezap, double;t they will work on odroid as we don't have drivers yet, it all WIP.

by **taki** » Wed Feb 08, 2017 11:59 pm

For openat 6.0
Kodi compilation ok.

by **andyblac** » Thu Feb 09, 2017 1:43 am

yeah, must have been fixed, but anyway running kodi inside e2 Imo is stupid, this is a sat box software not a media player, and why OpenViX does not support Kodi. if you want kodi Imo you be running LE.

but if OATV support kodi, it should already be in their feeds.

by **taki** » Thu Feb 09, 2017 1:56 am

ok but dont work dvbpart. my problem
Collected errors:
* calculate_dependencies_for: Cannot satisfy the following dependencies for openatv-base:
* enigma2-plugin-extensions-startkodi *
* opkg_solver_install: Cannot install package openatv-base.
I delete box config "enigma2-plugin-extensions-startkodi". I have no error. oe aliance I want to know oe-alliance where call this extension.

here is oe alliance plugin patch

Code: Select all: diff -ru a/configure.ac b/configure.ac --- a/configure.ac 2017-01-26 08:43:07.000000000 +0300 +++ b/configure.ac 2017-02-07 00:03:06.226880980 +0300 @@ -52,7 +52,8 @@ AM_CONDITIONAL(ODIN, test `echo "$BOXTYPE" | cut -b 1-4` == "odin") AM_CONDITIONAL(EBOX, test `echo "$BOXTYPE" | cut -b 1-4` == "ebox") AM_CONDITIONAL(SPARK, test `echo "$BOXTYPE" | cut -b 1-5` == "spark") -AM_CONDITIONAL(WETEK, test `echo "$BOXTYPE" | cut -b 1-5` == "wetek") +AM_CONDITIONAL(WETEK, test `echo "$BOXTYPE" | cut -b 1-5` == "minix") +AM_CONDITIONAL(MINIX, test `echo "$BOXTYPE" | cut -b 1-5` == "wetek") AM_CONDITIONAL(HARDKERNEL, test `echo "$BOXTYPE"| cut -b 1-6` == "odroid") AM_CONDITIONAL(AZBOXHD, test "$BOXTYPE" == "azboxhd") @@ -168,6 +169,7 @@ AM_CONDITIONAL(XC7358, test "$BOXTYPE" == xc7358) AM_CONDITIONAL(XC7358CI, test "$BOXTYPE" == xc7358ci) AM_CONDITIONAL(WETEKPLAY, test "$BOXTYPE" == wetekplay) +AM_CONDITIONAL(MINIXX8HPLUS, test "$BOXTYPE" == minixx8hplus) if test `echo "$BOXTYPE" | cut -b 1-2` == "dm"; then AC_DEFINE(DREAMBOX, 1, [Dreambox hardware]) fi @@ -176,7 +178,7 @@ AM_CONDITIONAL(HAVE_ARMV7A, test "$BOXTYPE" == cube) AM_CONDITIONAL(HAVE_ARMV7AHF, test "$BOXTYPE" == hd51 -o "$BOXTYPE" == hd52 -o "$BOXTYPE" == vusolo4k -o "$BOXTYPE" == vuuno4k -o "$BOXTYPE" == vuultimo4k -o "$BOXTYPE" == dm900 -o "$BOXTYPE" == sf4008 -o "$BOXTYPE" == dags7252 -o "$BOXTYPE" == gb7252) -AM_CONDITIONAL(HAVE_CORTEXA9HF, test "$BOXTYPE" == wetekplay) +AM_CONDITIONAL(HAVE_CORTEXA9HF, test "$BOXTYPE" == wetekplay -o "$BOXTYPE" == minixx8hplus) AC_CONFIG_FILES([ Makefile diff -ru a/Makefile.am b/Makefile.am --- a/Makefile.am 2017-01-26 08:43:07.000000000 +0300 +++ b/Makefile.am 2017-02-07 00:04:20.064237057 +0300 @@ -263,6 +263,10 @@ SUBDIRS += RCUSelect ReZap endif +if MINIX +SUBDIRS += RCUSelect ReZap +endif + if HARDKERNEL SUBDIRS += RCUSelect ReZap endif @@ -277,4 +281,4 @@ if XC7358CI SUBDIRS += VPLEDControl -endif \ No newline at end of file +endif diff -ru a/RCUSelect/src/plugin.py b/RCUSelect/src/plugin.py --- a/RCUSelect/src/plugin.py 2017-01-26 08:43:07.000000000 +0300 +++ b/RCUSelect/src/plugin.py 2017-02-07 00:16:50.017469585 +0300 @@ -50,6 +50,7 @@ self.setTitle(title) self["pixmap"] = Pixmap() self.rcuval = [_("WeTek Play2 RCU"), + _('Minix X8-H Plus (Classic) RCU'), _('WeTek Play (Classic) RCU'), _("WeTek Play Enigma2 RCU"), _("WeTek Play OpenElec RCU"), @@ -74,6 +75,7 @@ def SetOSDList(self): boxime = HardwareInfo().get_device_name() + if boxime == 'minixx8hplus': choice = 'Minix X8-H Plus' if boxime == 'wetekplay2': choice = 'WeTek Play2 RCU' if boxime == 'wetekplay': choice = 'WeTek Play Enigma2 RCU' try: @@ -101,7 +103,9 @@ self.rcuv = self.rcuval[var] #if self.rcuv != self.rcuold: copy keymap try: - if self.rcuv == 'WeTek Play2 RCU': + if self.rcuv == 'MINIX X8-H PLUS RCU': + os.system("cp -f /etc/amremote/minix.conf /etc/amremote/minix.conf &") + elif self.rcuv == 'WeTek Play (Classic) RCU': os.system("cp -f /etc/amremote/wetek_play2.conf /etc/amremote/wetek.conf &") elif self.rcuv == 'WeTek Play (Classic) RCU': os.system("cp -f /etc/amremote/wetek1.conf /etc/amremote/wetek.conf &") @@ -135,17 +139,17 @@ os.system("killall -9 remotecfg &") boxime = HardwareInfo().get_device_name() if boxime == 'wetekplay2': - fin = file('/etc/amremote/wetek.conf') - fout = open('/etc/amremote/wetek_tmp.conf', 'w') + fin = file('/etc/amremote/minix.conf') + fout = open('/etc/amremote/minix_tmp.conf', 'w') for line in fin : if 'work_mode' in line: line = 'work_mode = 0\n' fout.write(line) fout.close() - os.system('mv -f /etc/amremote/wetek_tmp.conf /etc/amremote/wetek.conf &') + os.system('mv -f /etc/amremote/minix_tmp.conf /etc/amremote/minix.conf &') os.system("/usr/bin/remotecfg /etc/amremote/wetek.conf &") - if self.rcuold == "WeTek Play OpenElec RCU" or self.rcuv == "WeTek Play OpenElec RCU": + if self.rcuold == "Minix X8-H Plus OpenElec RCU" or self.rcuv == "Minix X8-H Plus OpenElec RCU": if self.rcuold != self.rcuv: - if self.rcuv == 'WeTek Play OpenElec RCU': + if self.rcuv == 'Minix X8-H Plus OpenElec RCU': if getImageDistro() == "openspa": os.system("cp -f /usr/lib/enigma2/python/Plugins/Extensions/RCUSelect/conf/keymap_OpenELEC.xml /usr/share/enigma2/keymap.xml &") else: @@ -173,7 +177,7 @@ def Plugins(**kwargs): boxime = HardwareInfo().get_device_name() - if boxime == 'wetekplay' or boxime == 'wetekplayplus' or boxime == 'wetekplay2' or boxime == 'wetekplay2s' : + if boxime == 'wetekplay' or boxime == 'wetekplayplus' or boxime == 'wetekplay2' or boxime == 'wetekplay2s' or boxime == 'minixx8hplus' : return \ [PluginDescriptor(name=_("RCU Select"), where = PluginDescriptor.WHERE_MENU, fnc=system), ]

by **andyblac** » Thu Feb 09, 2017 7:45 am

atm e2 does not run on odroid c2 as we have no drivers. what box are you trying to build ?

by **taki** » Thu Feb 09, 2017 1:38 pm

'Minix X8-H Plus s812-h 2gb ram

by **andyblac** » Thu Feb 09, 2017 8:19 pm

taki wrote:'Minix X8-H Plus s812-h 2gb ram

not supported in oe-a, beside this thread is about Odroid C2.

by **taki** » Wed Feb 15, 2017 3:17 am

here is openatv 6.0 manuel start kodi and enigma2 log

Code: Select all: root@minixx8hplus:~# enigma2 [eErrorOutput] PIPE_BUF: 4096 [eErrorOutput] F_SETPIPE_SZ: 1048576 [eErrorOutput] F_GETPIPE_SZ 0: 1048576 PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10 BCM accel interface not available - Operation not permitted FBIO_SET_MANUAL_BLIT: Operation not permitted EVIOCGRAB: Device or resource busy EVIOCGRAB: Device or resource busy executing main 19:07:31.305 base/init.cpp:47 setRunlevel + (1) Background File Eraser 19:07:31.305 base/init.cpp:47 setRunlevel + (5) Tuxtxt 19:07:31.305 base/init.cpp:47 setRunlevel + (8) graphics acceleration manager 19:07:31.305 base/init.cpp:47 setRunlevel + (9) Font Render Class 19:07:31.305 gdi/font.cpp:190 fontRenderClass [FONT] initializing lib... 19:07:31.305 gdi/font.cpp:198 fontRenderClass [FONT] loading fonts... 19:07:31.306 gdi/font.cpp:203 fontRenderClass [FONT] Intializing font cache, usi ng max. 4MB... 19:07:31.306 base/init.cpp:47 setRunlevel + (9) gLCDDC 19:07:31.306 gdi/lcd.cpp:36 setSize lcd buffer 0x22b4b20 8448 bytes, stride 132 19:07:31.306 gdi/glcddc.cpp:43 gLCDDC LCD resolution: 132 x 64 x 8 (stride: 132) 19:07:31.306 base/init.cpp:47 setRunlevel + (9) GFBDC 19:07:31.306 gdi/fb.cpp:70 fbClass 24576k total video mem 19:07:31.306 gdi/fb.cpp:78 fbClass 24576k video mem 19:07:31.306 gdi/fb.cpp:173 SetMode - double buffering available! 19:07:31.308 gdi/gfbdc.cpp:276 setResolution 17376kB available for acceleration surfaces. 19:07:31.308 gdi/gfbdc.cpp:277 setResolution resolution: 1280 x 720 x 32 (stride : 5120) 19:07:31.308 base/init.cpp:47 setRunlevel + (10) gRC 19:07:31.309 gdi/grc.cpp:42 gRC RC thread created successfully 19:07:31.309 base/init.cpp:47 setRunlevel + (15) eWindowStyleManager 19:07:31.309 base/init.cpp:47 setRunlevel + (20) AVSwitch Driver 19:07:31.309 driver/avswitch.cpp:24 eAVSwitch couldnt open /dev/dbox/fp0 to moni tor vcr scart slow blanking changed! 19:07:31.309 base/init.cpp:47 setRunlevel + (20) misc options 19:07:31.309 base/init.cpp:47 setRunlevel + (20) RC Input layer 19:07:31.309 base/init.cpp:47 setRunlevel + (20) UHF Modulator 19:07:31.309 driver/rfmod.cpp:27 eRFmod couldnt open /dev/rfmod0!!!! 19:07:31.309 base/init.cpp:47 setRunlevel + (20) DVB-CI UI 19:07:31.309 base/init.cpp:47 setRunlevel + (21) input device driver 19:07:31.309 driver/rcinput.cpp:625 eRCDeviceInputDev Input device "aml_keypad" is a keyboard 19:07:31.309 driver/rcinput.cpp:625 eRCDeviceInputDev Input device "gpio_keypad" is a remotecontrol 19:07:31.309 driver/rcinput.cpp:625 eRCDeviceInputDev Input device "rn5t618_pmu" is a mouse 19:07:31.309 driver/rcinput.cpp:625 eRCDeviceInputDev Input device "cec_input" i s a remotecontrol 19:07:31.309 driver/rcinput.cpp:682 eInputDeviceInit Found 4 input devices. 19:07:31.309 base/init.cpp:47 setRunlevel + (22) Hdmi CEC driver 19:07:31.309 base/init.cpp:47 setRunlevel + (30) eActionMap 19:07:31.309 base/init.cpp:47 setRunlevel + (35) CA handler 19:07:31.309 base/init.cpp:47 setRunlevel + (35) CI Slots 19:07:31.310 dvb_ci/dvbci.cpp:268 eDVBCIInterfaces scanning for common interface s.. 19:07:31.310 dvb_ci/dvbci.cpp:1041 setInputSource cannot open /proc/stb/tsmux/in put0 19:07:31.310 dvb_ci/dvbci.cpp:1041 setInputSource cannot open /proc/stb/tsmux/in put1 19:07:31.310 dvb_ci/dvbci.cpp:307 eDVBCIInterfaces done, found 0 common interfac e slots 19:07:31.310 base/init.cpp:47 setRunlevel + (40) eServiceCenter 19:07:31.310 service/service.cpp:116 eServiceCenter settings instance. 19:07:31.310 base/init.cpp:47 setRunlevel + (41) Stream server 19:07:31.310 network/serversocket.cpp:53 eServerSocket [SERVERSOCKET] ERROR on b ind() (Address already in use) 19:07:31.310 base/init.cpp:47 setRunlevel + (41) Encoders 19:07:31.310 base/cfile.h:17 CFile error /proc/stb/encoder/0/decoder [No such fi le or directory] 19:07:31.310 base/init.cpp:47 setRunlevel + (41) eServiceFactoryDVB 19:07:31.310 base/init.cpp:47 setRunlevel + (41) eServiceFactoryFS 19:07:31.310 base/init.cpp:47 setRunlevel + (41) eServiceFactoryMP3 19:07:31.310 base/init.cpp:47 setRunlevel + (41) eServiceFactoryM2TS 19:07:31.310 base/init.cpp:47 setRunlevel + (41) eServiceFactoryHDMI 19:07:31.310 base/init.cpp:47 setRunlevel + (41) eServiceFactoryDVD 19:07:31.310 base/init.cpp:63 setRunlevel reached rl 70 19:07:31.310 dvb/db.cpp:553 loadServicelist ---- opening lame channel db 19:07:31.310 dvb/db.cpp:567 loadServicelist reading services (version 4) 19:07:31.342 dvb/db.cpp:634 loadServicelist loaded 175 channels/transponders and 2197 services 19:07:31.342 dvb/dvb.cpp:188 eDVBResourceManager boxtype detection via /proc/stb /info not possible... use fallback via demux count! 19:07:31.342 dvb/dvb.cpp:198 eDVBResourceManager found 0 adapter, 0 frontends(0 sim) and 0 demux, boxtype 0 19:07:31.342 dvb/dvbtime.cpp:235 eDVBLocalTimeHandler Use valid Linux Time :) (R TC?) 19:07:31.342 dvb/epgcache.cpp:385 eEPGCache [EPGC] Initialized EPGCache (wait fo r setCacheFile call now) 19:07:31.343 enigma.cpp:322 main Loading spinners... 19:07:31.345 base/cfile.h:17 CFile error /usr/share/enigma2/spinner/wait10.png [ No such file or directory] 19:07:31.346 gdi/epng.cpp:24 loadPNG [ePNG] couldn't open /usr/share/enigma2/spi nner/wait10.png 19:07:31.346 enigma.cpp:341 main found 9 spinner! 19:07:31.346 base/ioprio.cpp:91 setIoPrio setIoPrio best-effort level 3 ok 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_left [No s uch file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_top [No su ch file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_width [No such file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_height [No such file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_apply [No such file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_left [No s uch file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_top [No su ch file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_width [No such file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_height [No such file or directory] 19:07:31.346 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_apply [No such file or directory] 19:07:31.453 driver/misc_options.cpp:48 detected_12V_output couldn't open /proc/ stb/misc/12V_output 19:07:31.456 Components/Harddisk.py:803 enumerateBlockDevices [Harddisk] enumera ting block devices... 19:07:31.462 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/devices/platform/aml_sdhc.0/m mc_host/emmc/emmc:0001/block/mmcblk1/model' 19:07:31.463 Components/Harddisk.py:107 __init__ new Harddisk mmcblk1boot0 -> /d ev/mmcblk1boot0 -> /dev/mmcblk1boot0 19:07:31.465 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/devices/platform/aml_sdhc.0/m mc_host/emmc/emmc:0001/block/mmcblk1/model' 19:07:31.466 Components/Harddisk.py:107 __init__ new Harddisk mmcblk1boot1 -> /d ev/mmcblk1boot1 -> /dev/mmcblk1boot1 19:07:31.468 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/devices/platform/aml_sdio.0/m mc_host/sd/sd:aaaa/model' 19:07:31.469 Components/Harddisk.py:107 __init__ new Harddisk mmcblk0 -> /dev/mm cblk0 -> /dev/mmcblk0 19:07:31.470 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/block/mmcblk0p1/device/model' 19:07:31.471 Components/Harddisk.py:107 __init__ new Harddisk mmcblk0p1 -> /dev/ mmcblk0p1 -> /dev/mmcblk0p1 19:07:31.472 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/block/mmcblk0p2/device/model' 19:07:31.473 Components/Harddisk.py:107 __init__ new Harddisk mmcblk0p2 -> /dev/ mmcblk0p2 -> /dev/mmcblk0p2 19:07:31.474 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/block/mmcblk0p3/device/model' 19:07:31.475 Components/Harddisk.py:107 __init__ new Harddisk mmcblk0p3 -> /dev/ mmcblk0p3 -> /dev/mmcblk0p3 19:07:31.477 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/devices/platform/aml_sdhc.0/m mc_host/emmc/emmc:0001/model' 19:07:31.478 Components/Harddisk.py:107 __init__ new Harddisk mmcblk1 -> /dev/mm cblk1 -> /dev/mmcblk1 19:07:31.480 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/devices/platform/aml_sdhc.0/m mc_host/emmc/emmc:0001/block/mmcblk1/model' 19:07:31.481 Components/Harddisk.py:107 __init__ new Harddisk mmcblk1boot0 -> /d ev/mmcblk1boot0 -> /dev/mmcblk1boot0 19:07:31.482 Components/Harddisk.py:950 getUserfriendlyDeviceName couldn't read model: [Errno 2] No such file or directory: '/sys/devices/platform/aml_sdhc.0/m mc_host/emmc/emmc:0001/block/mmcblk1/model' 19:07:31.483 Components/Harddisk.py:107 __init__ new Harddisk mmcblk1boot1 -> /d ev/mmcblk1boot1 -> /dev/mmcblk1boot1 19:07:31.486 Components/Harddisk.py:812 enumerateNetworkMounts [Harddisk] enumer ating network mounts... 19:07:31.495 skin.py:127 <module> SKIN ERROR: {skin_display.xml}: display skin n ot found. Please contact the skin's author! 19:07:31.495 skin.py:131 <module> defaulting to standard display skin... skin_di splay.xml 19:07:31.495 skin.py:58 addSkin [SKIN ERROR] attempt to add a skin without filen ame 19:07:31.613 Components/NimManager.py:156 update sec config cleared 19:07:31.613 Components/NimManager.py:288 update sec config completed 19:07:31.622 Components/AVSwitch.py:140 readPreferredModes reading preferred mod es failed, using all modes 19:07:31.623 RecordTimer.py:36 <module> [RecordTimer] import from 'Screens.InfoB ar import InfoBar' failed: cannot import name InfoBar 19:07:31.692 Screens/InfoBarGenerics.py:144 loadResumePoints [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoi nts.pkl' 19:07:31.751 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//bouquet s.tv 19:07:31.751 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.favourites.tv 19:07:31.752 dvb/db.cpp:975 loadBouquet 114 entries in Bouquet userbouquet.favou rites.tv 19:07:31.752 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe2.tv 19:07:31.752 dvb/db.cpp:975 loadBouquet 78 entries in Bouquet userbouquet.dbe2.t v 19:07:31.752 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe3.tv 19:07:31.752 dvb/db.cpp:975 loadBouquet 66 entries in Bouquet userbouquet.dbe3.t v 19:07:31.752 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe4.tv 19:07:31.753 dvb/db.cpp:975 loadBouquet 22 entries in Bouquet userbouquet.dbe4.t v 19:07:31.753 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe5.tv 19:07:31.753 dvb/db.cpp:975 loadBouquet 28 entries in Bouquet userbouquet.dbe5.t v 19:07:31.753 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe6.tv 19:07:31.753 dvb/db.cpp:975 loadBouquet 8 entries in Bouquet userbouquet.dbe6.tv 19:07:31.753 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe7.tv 19:07:31.753 dvb/db.cpp:975 loadBouquet 9 entries in Bouquet userbouquet.dbe7.tv 19:07:31.753 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe8.tv 19:07:31.753 dvb/db.cpp:975 loadBouquet 8 entries in Bouquet userbouquet.dbe8.tv 19:07:31.753 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe9.tv 19:07:31.753 dvb/db.cpp:975 loadBouquet 6 entries in Bouquet userbouquet.dbe9.tv 19:07:31.754 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe10.tv 19:07:31.754 dvb/db.cpp:975 loadBouquet 18 entries in Bouquet userbouquet.dbe10. tv 19:07:31.754 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe11.tv 19:07:31.754 dvb/db.cpp:975 loadBouquet 6 entries in Bouquet userbouquet.dbe11.t v 19:07:31.754 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe12.tv 19:07:31.754 dvb/db.cpp:975 loadBouquet 53 entries in Bouquet userbouquet.dbe12. tv 19:07:31.754 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe13.tv 19:07:31.754 dvb/db.cpp:975 loadBouquet 15 entries in Bouquet userbouquet.dbe13. tv 19:07:31.754 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe14.tv 19:07:31.755 dvb/db.cpp:975 loadBouquet 185 entries in Bouquet userbouquet.dbe14 .tv 19:07:31.755 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe15.tv 19:07:31.756 dvb/db.cpp:975 loadBouquet 175 entries in Bouquet userbouquet.dbe15 .tv 19:07:31.756 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe16.tv 19:07:31.756 dvb/db.cpp:975 loadBouquet 40 entries in Bouquet userbouquet.dbe16. tv 19:07:31.756 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe17.tv 19:07:31.757 dvb/db.cpp:975 loadBouquet 6 entries in Bouquet userbouquet.dbe17.t v 19:07:31.757 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe18.tv 19:07:31.757 dvb/db.cpp:975 loadBouquet 184 entries in Bouquet userbouquet.dbe18 .tv 19:07:31.757 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe19.tv 19:07:31.758 dvb/db.cpp:975 loadBouquet 84 entries in Bouquet userbouquet.dbe19. tv 19:07:31.758 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe20.tv 19:07:31.758 dvb/db.cpp:975 loadBouquet 89 entries in Bouquet userbouquet.dbe20. tv 19:07:31.758 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe21.tv 19:07:31.759 dvb/db.cpp:975 loadBouquet 57 entries in Bouquet userbouquet.dbe21. tv 19:07:31.759 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe22.tv 19:07:31.759 dvb/db.cpp:975 loadBouquet 69 entries in Bouquet userbouquet.dbe22. tv 19:07:31.759 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe23.tv 19:07:31.760 dvb/db.cpp:975 loadBouquet 156 entries in Bouquet userbouquet.dbe23 .tv 19:07:31.760 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe24.tv 19:07:31.761 dvb/db.cpp:975 loadBouquet 189 entries in Bouquet userbouquet.dbe24 .tv 19:07:31.761 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe25.tv 19:07:31.761 dvb/db.cpp:975 loadBouquet 5 entries in Bouquet userbouquet.dbe25.t v 19:07:31.761 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe26.tv 19:07:31.761 dvb/db.cpp:975 loadBouquet 52 entries in Bouquet userbouquet.dbe26. tv 19:07:31.761 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe27.tv 19:07:31.762 dvb/db.cpp:975 loadBouquet 22 entries in Bouquet userbouquet.dbe27. tv 19:07:31.762 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe28.tv 19:07:31.762 dvb/db.cpp:975 loadBouquet 19 entries in Bouquet userbouquet.dbe28. tv 19:07:31.762 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe29.tv 19:07:31.762 dvb/db.cpp:975 loadBouquet 15 entries in Bouquet userbouquet.dbe29. tv 19:07:31.762 dvb/db.cpp:975 loadBouquet 29 entries in Bouquet bouquets.tv 19:07:31.762 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//bouquet s.radio 19:07:31.762 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.favourites.radio 19:07:31.763 dvb/db.cpp:975 loadBouquet 96 entries in Bouquet userbouquet.favour ites.radio 19:07:31.763 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe31.radio 19:07:31.763 dvb/db.cpp:975 loadBouquet 13 entries in Bouquet userbouquet.dbe31. radio 19:07:31.763 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe32.radio 19:07:31.763 dvb/db.cpp:975 loadBouquet 9 entries in Bouquet userbouquet.dbe32.r adio 19:07:31.763 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe33.radio 19:07:31.763 dvb/db.cpp:975 loadBouquet 40 entries in Bouquet userbouquet.dbe33. radio 19:07:31.764 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe34.radio 19:07:31.764 dvb/db.cpp:975 loadBouquet 2 entries in Bouquet userbouquet.dbe34.r adio 19:07:31.764 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe35.radio 19:07:31.764 dvb/db.cpp:975 loadBouquet 26 entries in Bouquet userbouquet.dbe35. radio 19:07:31.764 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe36.radio 19:07:31.765 dvb/db.cpp:975 loadBouquet 134 entries in Bouquet userbouquet.dbe36 .radio 19:07:31.765 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe37.radio 19:07:31.766 dvb/db.cpp:975 loadBouquet 70 entries in Bouquet userbouquet.dbe37. radio 19:07:31.766 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe38.radio 19:07:31.766 dvb/db.cpp:975 loadBouquet 9 entries in Bouquet userbouquet.dbe38.r adio 19:07:31.766 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe39.radio 19:07:31.766 dvb/db.cpp:975 loadBouquet 10 entries in Bouquet userbouquet.dbe39. radio 19:07:31.766 dvb/db.cpp:865 loadBouquet loading bouquet... /etc/enigma2//userbou quet.dbe40.radio 19:07:31.766 dvb/db.cpp:975 loadBouquet 10 entries in Bouquet userbouquet.dbe40. radio 19:07:31.766 dvb/db.cpp:975 loadBouquet 11 entries in Bouquet bouquets.radio 19:07:31.766 dvb/db.cpp:1019 renumberBouquet Renumbering... 19:07:31.773 mytest.py:86 useSyncUsingChanged [Time By]: Transponder 19:07:31.773 dvb/epgcache.cpp:472 timeUpdated [EPGC] time updated.. but cache fi le not set yet.. dont start epg!! 19:07:32.047 /usr/lib/python2.7/warnings.py:33 _show_warning :0: UserWarning: Yo u do not have a working installation of the service_identity module: 'No module named service_identity'. Please install it from <https://pypi.python.org/pypi/s ervice_identity> and make sure all of its dependencies are satisfied. Without t he service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification. Many valid certi ficate/hostname mappings may be rejected. 19:07:32.113 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Roboto -Bold.ttf...OK (Regular) 19:07:32.114 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Roboto -BoldItalic.ttf...OK (Italic) 19:07:32.114 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Roboto -Black.ttf...OK (Bold) 19:07:32.114 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Roboto -BlackItalic.ttf...OK (Boldit) 19:07:32.114 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/nmsbd. ttf...OK (Subtitlefont) 19:07:32.115 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/lcd.tt f...OK (LCD) 19:07:32.115 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/ae_AlM ateen.ttf...OK (Replacement) 19:07:32.115 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/tuxtxt .ttf...OK (Console) 19:07:32.117 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00_templates.xml 19:07:32.137 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00a_InfoBar.xml 19:07:32.138 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00b_SecondInfoBar.xml 19:07:32.139 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml 19:07:32.139 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00d_InfoBarLite.xml 19:07:32.139 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00e_ChannelSelection.xml 19:07:32.140 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00f_MoviePlayer.xml 19:07:32.142 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00g_EMC.xml 19:07:32.148 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00o_openatv.xml 19:07:32.195 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00p_plugins.xml 19:07:32.228 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00u_unchecked.xml 19:07:32.244 skin.py:523 loadSingleSkinData [SKIN] loading include: /usr/share/e nigma2/MetrixHD/skin_00z_design.xml 19:07:32.249 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/lcd.tt f...OK (LCD) 19:07:32.249 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/ae_AlM ateen.ttf...OK (Replacement) 19:07:32.250 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/tuxtxt .ttf...OK (Console) 19:07:32.250 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/andale .ttf...OK (Fixed) 19:07:32.250 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/nmsbd. ttf...OK (Arial) 19:07:32.250 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (Regular) 19:07:32.250 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) 19:07:32.251 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (SetrixHD) 19:07:32.251 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/meteocons.ttf...OK (Meteo) 19:07:32.251 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_title) 19:07:32.251 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_button) 19:07:32.252 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_clock) 19:07:32.252 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_large) 19:07:32.252 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_large_screen) 19:07:32.252 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_large_menu) 19:07:32.252 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (global_small) 19:07:32.253 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (global_menu) 19:07:32.253 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (screen_label) 19:07:32.253 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (screen_text) 19:07:32.253 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (screen_info) 19:07:32.254 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (epg_event) 19:07:32.254 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (epg_text) 19:07:32.254 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (epg_info) 19:07:32.254 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/setrixHD.ttf...OK (infobar_event) 19:07:32.254 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/enigma2/Metr ixHD/fonts/OpenSans-Regular.ttf...OK (infobar_text) 19:07:32.258 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Libera tionSans-Regular.ttf...OK (Subs) 19:07:32.258 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Libera tionSans-Italic.ttf...OK (Subsi) 19:07:32.259 gdi/font.cpp:159 Addcannot open /proc/stb/avs/0/colorformat cannot open /proc/stb/avs/0/colorformat Font [FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb) 19:07:32.259 gdi/font.cpp:159 AddFont [FONT] adding font /usr/share/fonts/Libera tionSans-BoldItalic.ttf...OK (Subsz) 19:07:32.260 Components/InputDevice.py:48 getInputDevices [iInputDevices] getInp utDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > 19:07:32.260 Components/InputDevice.py:48 getInputDevices [iInputDevices] getInp utDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > 19:07:32.260 Components/InputDevice.py:48 getInputDevices [iInputDevices] getInp utDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > 19:07:32.261 Components/InputDevice.py:48 getInputDevices [iInputDevices] getInp utDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > 19:07:32.261 Components/InputDevice.py:48 getInputDevices [iInputDevices] getInp utDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > 19:07:32.261 Components/InputDevice.py:48 getInputDevices [iInputDevices] getInp utDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > 19:07:32.267 Components/Keyboard.py:32 activateKeyboardMap Activating keymap: Ge rman keyboard 19:07:32.268 Components/Language.py:87 activateLanguage Activating language Deut sch 19:07:32.364 Components/AVSwitch.py:318 setAspect [VideoMode] setting aspect: 16 :9 19:07:32.364 Components/AVSwitch.py:332 setWss [VideoMode] setting wss: auto 19:07:32.364 Components/AVSwitch.py:338 setPolicy43 [VideoMode] setting policy: panscan 19:07:32.365 driver/avswitch.cpp:131 setInput cannot open /proc/stb/avs/0/input 19:07:32.365 driver/avswitch.cpp:108 haveScartSwitch cannot open /proc/stb/avs/0 /input_choices 19:07:32.368 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: HDMI , mode: 720p, rate: 60Hz 19:07:32.368 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode fai led. 19:07:32.397 Components/EpgLoadSave.py:35 stop [EPGC Load] Poller disabled. 19:07:32.397 Components/EpgLoadSave.py:74 stop [EPGC Save] Poller disabled. 19:07:32.412 dvb/epgcache.cpp:444 setCacheFile [EPGC] setCacheFile read/write ep g data from/to '/etc/enigma2/epg.dat' 19:07:32.412 dvb/epgcache.cpp:456 timeUpdated [EPGC] time updated.. start EPG Ma inloop 19:07:32.412 dvb/epgcache.cpp:1281 load [EPGC] /etc/enigma2/epg.dat not found, t ry /epg.dat 19:07:32.635 Screens/UserInterfacePositioner.py:66 InitOsd Setting OSD position: 0 720 0 576 19:07:32.635 Components/EpgLoadSave.py:74 stop [EPGC Save] Poller disabled. 19:07:32.635 Components/EpgLoadSave.py:35 stop [EPGC Load] Poller disabled. 19:07:32.642 Components/PluginComponent.py:56 readPluginList Plugin Extensions/ WebInterface failed to load: No module named plugin 19:07:32.698 Plugins/Extensions/CutListEditor/plugin.py:19 <module> [CutListEdit or] import MovieCut failed 19:07:33.142 Tools/StbHardware.py:24 getFPVersion getFPVersion failed! 19:07:33.208 Components/Ipkg.py:19 opkgAddDestination [Ipkg] Added to OPKG desti nations: /media/mmcblk0p2 19:07:33.208 Components/Ipkg.py:19 opkgAddDestination [Ipkg] Added to OPKG desti nations: / 19:07:33.309 gdi/grc.cpp:193 thread main thread is non-idle! display spinner! 19:07:33.321 Plugins/Extensions/Infopanel/plugin.py:173 <module> [Info-Panel] ma chinebrand: minix 19:07:33.321 Plugins/Extensions/Infopanel/plugin.py:174 <module> [Info-Panel] ma chinename: x8hplus 19:07:33.321 Plugins/Extensions/Infopanel/plugin.py:175 <module> [Info-Panel] oe m name: minix 19:07:33.321 Plugins/Extensions/Infopanel/plugin.py:176 <module> [Info-Panel] bo xtype: minixx8hplus 19:07:34.017 Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:360 setC onfiguredValues --> applying pep values 19:07:34.017 Plugins/SystemPlugins/VideoEnhancement/VideoEnhancement.py:365 setC onfiguredValues couldn't apply pep values. 19:07:34.029 Plugins/Extensions/AutoTimer/AutoPoller.py:16 __init__ [AutoTimer] Auto Poll Enabled 19:07:34.030 Plugins/Extensions/Infopanel/plugin.py:213 camstart [Info-Panel] fa iled to write /proc/stb/video/alpha 19:07:34.033 Tools/StbHardware.py:102 getFPWasTimerWakeup wasTimerWakeup failed! 19:07:34.033 Navigation.py:71 __init__ ========================================= =========================================================== 19:07:34.033 Navigation.py:85 __init__ [NAVIGATION] starting deepstandby-workaro und 19:07:34.033 Navigation.py:98 __init__ [NAVIGATION] was timer wakeup = False 19:07:34.033 Navigation.py:99 __init__ [NAVIGATION] current time is Tue Feb 14 1 9:07:34 2017 19:07:34.033 Navigation.py:121 __init__ [NAVIGATION] no next timers 19:07:34.033 Navigation.py:122 __init__ ======================================== ============================================================ 19:07:34.035 skin.py:868 readSkin [SKIN] No skin to read... 19:07:34.035 skin.py:1039 readSkin [SKIN] processing screen <embedded-in-'LoopSy ncMain'>: 19:07:34.036 skin.py:852 readSkin [SKIN] Parsing embedded skin <embedded-in-'Sim pleSummary'> 19:07:34.036 skin.py:1039 readSkin [SKIN] processing screen <embedded-in-'Simple Summary'>: 19:07:34.038 Screens/Screen.py:151 show [SCREENNAME] ['LoopSyncMain_summary', ' SimpleSummary'] 19:07:34.039 Screens/Screen.py:151 show [SCREENNAME] LoopSyncMain 19:07:34.039 Plugins/Extensions/Infopanel/plugin.py:213 camstart [Info-Panel] fa iled to write /proc/stb/video/alpha 19:07:34.039 dvb/volume.cpp:59 openMixer [eDVBVolumecontrol] Setup ALSA Mixer hw :0 - Master 19:07:34.043 Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: +++ EMC git20170206 startup 19:07:34.162 Plugins/Extensions/EnhancedMovieCenter/EnhancedMovieCenter.py:97 ch eckImg [EMC] checkImg is not Vti 19:07:34.162 Plugins/Extensions/EnhancedMovieCenter/EnhancedMovieCenter.py:104 c heckImg [EMC] checkImg is newPiconRenderer 19:07:34.163 mytest.py:544 runScreenTest [(0, <class 'Screens.VideoWizard.VideoW izard'>), (2, <class 'Screens.LanguageSelection.LanguageWizard'>), (20, <class ' Screens.StartWizard.StartWizard'>), (25, <function NetworkWizard at 0xb22dbe30>) , (100, <class 'Screens.InfoBar.InfoBar'>)] 19:07:34.166 Screens/WizardLanguage.py:26 updateLanguageDescription ('de_DE', (' Deutsch', 'de', 'DE', 'ISO-8859-15')) cannot open /proc/stb/avs/0/colorformat cannot open /proc/stb/avs/0/colorformat cannot open /proc/stb/avs/0/colorformat 19:07:34.171 skin.py:1039 readSkin [SKIN] processing screen VideoWizard: 19:07:34.174 skin.py:1007 process_screen [SKIN] SKIN ERROR in screen 'VideoWizar d' widget 'widget': {MetrixHD/skin.xml}: component with name 'HelpWindow' was no t found in skin of screen 'VideoWizard'!. Please contact the skin's author! 19:07:34.180 Components/GUISkin.py:35 createGUIScreen warning, skin is missing e lement wizard in <class 'Screens.VideoWizard.VideoWizard'> 19:07:34.203 Components/GUISkin.py:35 createGUIScreen warning, skin is missing e lement portpic in <class 'Screens.VideoWizard.VideoWizard'> 19:07:34.205 skin.py:852 readSkin [SKIN] Parsing embedded skin <embedded-in-'Vid eoWizardSummary'> 19:07:34.206 skin.py:1039 readSkin [SKIN] processing screen <embedded-in-'VideoW izardSummary'>: 19:07:34.207 skin.py:315 applyAll [Skin] Attribute not implemented: id value: 1 19:07:34.208 Screens/Screen.py:151 show [SCREENNAME] VideoWizardSummary 19:07:34.209 Screens/Rc.py:88 selectKey selectPic: arrowdown 19:07:34.209 Screens/Wizard.py:591 afterAsyncCode setZPosition 19:07:34.210 Components/AVSwitch.py:140 readPreferredModes reading preferred mod es failed, using all modes 19:07:34.210 Screens/VideoWizard.py:117 listInputChannels listInputChannels: [(' HDMI', 'HDMI'), ('Scart', 'Scart'), ('YPbPr', 'YPbPr')] 19:07:34.210 Screens/Wizard.py:481 selChanged self.selection: HDMI 19:07:34.210 Screens/VideoWizard.py:128 inputSelectionMoved input selection move d: HDMI 19:07:34.210 Screens/VideoWizard.py:139 inputSelect inputSelect: HDMI 19:07:34.211 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz'] ), ('1080i', ['60Hz'])] 19:07:34.211 Screens/VideoWizard.py:178 listRates modes for port HDMI and mode 7 20p 19:07:34.211 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:34.211 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:34.211 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: HDMI , mode: 720p, rate: 60Hz 19:07:34.211 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode fai led. 19:07:34.213 Screens/Wizard.py:481 selChanged self.selection: HDMI 19:07:34.213 Screens/VideoWizard.py:128 inputSelectionMoved input selection move d: HDMI 19:07:34.213 Screens/VideoWizard.py:139 inputSelect inputSelect: HDMI 19:07:34.213 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz'] ), ('1080i', ['60Hz'])] 19:07:34.213 Screens/VideoWizard.py:178 listRates modes for port HDMI and mode 7 20p 19:07:34.213 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:34.213 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:34.213 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: HDMI , mode: 720p, rate: 60Hz 19:07:34.214 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode fai led. 19:07:34.215 Screens/Wizard.py:481 selChanged self.selection: HDMI 19:07:34.215 Screens/VideoWizard.py:128 inputSelectionMoved input selection move d: HDMI 19:07:34.215 Screens/VideoWizard.py:139 inputSelect inputSelect: HDMI 19:07:34.215 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz'] ), ('1080i', ['60Hz'])] 19:07:34.216 Screens/VideoWizard.py:178 listRates modes for port HDMI and mode 7 20p 19:07:34.216 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:34.216 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:34.216 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: HDMI , mode: 720p, rate: 60Hz 19:07:34.216 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode fai led. 19:07:34.217 Screens/Wizard.py:616 afterAsyncCode showing config 19:07:34.218 Screens/Screen.py:151 show [SCREENNAME] VideoWizard 19:07:34.219 skin.py:1039 readSkin [SKIN] processing screen Volume: 19:07:34.223 skin.py:1039 readSkin [SKIN] processing screen Mute: 19:07:34.224 Screens/Volume.py:13 setValue setValue 50 19:07:34.227 Components/AVSwitch.py:140 readPreferredModes reading preferred mod es failed, using all modes 19:07:34.227 skin.py:1039 readSkin [SKIN] processing screen Scart: 19:07:34.230 skin.py:1039 readSkin [SKIN] processing screen AutoVideoModeLabel: 19:07:34.232 mytest.py:593 runScreenTest lastshutdown=False (True = last shutdown was OK) 19:07:34.232 mytest.py:594 runScreenTest NOK shutdown action=normal 19:07:34.232 mytest.py:595 runScreenTest bootup action=normal 19:07:34.299 Screens/LogManager.py:71 TrimTimerJob [LogManager] Trim Poll Starte d 19:07:34.307 Screens/LogManager.py:75 TrashTimerJob [LogManager] Trash Poll Star ted 19:07:34.307 Screens/LogManager.py:119 JobTrash [LogManager] probing folders 19:07:34.309 Screens/LogManager.py:139 JobTrash [LogManager] found following log 's: ['/home/root/logs/'] 19:07:34.309 Screens/LogManager.py:142 JobTrash [LogManager] looking in: /home/r oot/logs/ 19:07:34.309 Components/NetworkTime.py:42 update_schedule [NTP]: setting E2 unix time: 1487095654.31 19:07:34.309 Components/NetworkTime.py:43 update_schedule [NTP]: setting E2 real time: Tue Feb 14 19:07:34 2017 19:07:34.309 Tools/StbHardware.py:61 setRTCtime setRTCtime failed! 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 37(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 40(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 43(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 46(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 49(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 52(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 55(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(17) 19:07:34.311 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 61(17) 19:07:34.321 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 66(16) 19:07:34.333 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 70(16) 19:07:34.334 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 73(16) 19:07:34.335 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 76(16) 19:07:34.335 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 79(16) 19:07:34.336 Components/Task.py:375 jobDone job Components.Task.Job name=LogMana ger #tasks=1 completed with [] in None 19:07:34.336 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 38(16) 19:07:34.338 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 35(16) 19:07:34.346 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 41(16) 19:07:34.346 Components/Network.py:125 routeFinished 0.0.0.0 19:07:34.346 Components/Network.py:125 routeFinished 192.168 19:07:34.351 plugin/controllers/SR.py:24 __init__ SerienRecorder plugin not foun d 19:07:34.351 plugin/controllers/ER.py:23 __init__ EPG Refresh Plugin not found 19:07:34.352 plugin/httpserver.py:156 buildRootTree [OpenWebif] no plugins to lo ad 19:07:34.352 plugin/httpserver.py:180 HttpdStart [OpenWebif] failed to listen on Port 80 19:07:34.353 base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 44(16) 19:07:36.031 Plugins/Extensions/Infopanel/CamStart.py:90 timerEvent [CAMSTARTER] No Cam to Start, Exit 19:07:38.901 Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: Setting EPG language: de_DE 19:07:39.170 Plugins/Extensions/EnhancedMovieCenter/VlcPluginInterface.py:54 <module> [VLC] Checking for buildin servicets ... no 19:07:39.170 Plugins/Extensions/EnhancedMovieCenter/VlcPluginInterface.py:59 <module> [VLC] Checking for existing and usable servicets.so ... No module named servicets 19:07:39.171 Plugins/Extensions/EnhancedMovieCenter/VlcPluginInterface.py:62 <module> [VLC] Checking for usable gstreamer service ... yes 19:07:39.209 Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py:90 <module> [EMCMS] python-mutagen is not available: No module named mutagen.mp3 19:07:39.210 Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: Next trashcan cleanup in 353 minutes 19:07:41.210 Plugins/Extensions/EnhancedMovieCenter/EMCTasker.py:43 emcDebugOut EMC: [EMCMS] trashcan cleanup: no trashcan... 19:07:44.209 Screens/Wizard.py:481 selChanged self.selection: Scart 19:07:44.209 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: Scart 19:07:44.209 Screens/VideoWizard.py:139 inputSelect inputSelect: Scart 19:07:44.209 Screens/VideoWizard.py:141 inputSelect modeList: [] 19:07:44.210 Screens/Wizard.py:481 selChanged self.selection: Scart 19:07:44.211 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: Scart 19:07:44.211 Screens/VideoWizard.py:139 inputSelect inputSelect: Scart 19:07:44.211 Screens/VideoWizard.py:141 inputSelect modeList: [] 19:07:44.212 Screens/Wizard.py:481 selChanged self.selection: Scart 19:07:44.212 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: Scart 19:07:44.212 Screens/VideoWizard.py:139 inputSelect inputSelect: Scart 19:07:44.212 Screens/VideoWizard.py:141 inputSelect modeList: [] 19:07:44.214 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: Scart 19:07:44.214 Screens/VideoWizard.py:139 inputSelect inputSelect: Scart 19:07:44.214 Screens/VideoWizard.py:141 inputSelect modeList: [] cannot open /proc/stb/avs/0/colorformat cannot open /proc/stb/avs/0/colorformat cannot open /proc/stb/avs/0/colorformat cannot open /proc/stb/avs/0/colorformat 19:07:54.209 Screens/Wizard.py:481 selChanged self.selection: YPbPr 19:07:54.209 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: YPbPr 19:07:54.209 Screens/VideoWizard.py:139 inputSelect inputSelect: YPbPr 19:07:54.209 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz']), ('1080i', ['60Hz'])] 19:07:54.209 Screens/VideoWizard.py:178 listRates modes for port YPbPr and mode 720p 19:07:54.210 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:54.210 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:54.210 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: YPbPr, mode: 720p, rate: 60Hz 19:07:54.210 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode failed. 19:07:54.212 Screens/Wizard.py:481 selChanged self.selection: YPbPr 19:07:54.212 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: YPbPr 19:07:54.212 Screens/VideoWizard.py:139 inputSelect inputSelect: YPbPr 19:07:54.212 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz']), ('1080i', ['60Hz'])] 19:07:54.212 Screens/VideoWizard.py:178 listRates modes for port YPbPr and mode 720p 19:07:54.212 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:54.212 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:54.213 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: YPbPr, mode: 720p, rate: 60Hz 19:07:54.213 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode failed. 19:07:54.214 Screens/Wizard.py:481 selChanged self.selection: YPbPr 19:07:54.214 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: YPbPr 19:07:54.215 Screens/VideoWizard.py:139 inputSelect inputSelect: YPbPr 19:07:54.215 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz']), ('1080i', ['60Hz'])] 19:07:54.215 Screens/VideoWizard.py:178 listRates modes for port YPbPr and mode 720p 19:07:54.215 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:54.215 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:54.215 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: YPbPr, mode: 720p, rate: 60Hz 19:07:54.215 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode failed. 19:07:54.217 Screens/VideoWizard.py:128 inputSelectionMoved input selection moved: YPbPr 19:07:54.217 Screens/VideoWizard.py:139 inputSelect inputSelect: YPbPr 19:07:54.217 Screens/VideoWizard.py:141 inputSelect modeList: [('720p', ['60Hz']), ('1080i', ['60Hz'])] 19:07:54.217 Screens/VideoWizard.py:178 listRates modes for port YPbPr and mode 720p 19:07:54.217 Screens/VideoWizard.py:180 listRates ('720p', ['60Hz']) 19:07:54.217 Screens/VideoWizard.py:180 listRates ('1080i', ['60Hz']) 19:07:54.218 Components/AVSwitch.py:164 setMode [VideoMode] setMode - port: YPbPr, mode: 720p, rate: 60Hz 19:07:54.218 Components/AVSwitch.py:194 setMode [AVSwitch] setting videomode failed. ^C19:07:56.237 Components/InputHotplug.py:33 connectionLost connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost. ]19:07:56.237 Components/InputHotplug.py:33 connectionLost 19:07:56.239 mytest.py:608 runScreenTest [mytest.py] normal shutdown 19:07:56.240 mytest.py:675 runScreenTest ==================================================================================================== 19:07:56.240 Tools/StbHardware.py:38 setFPWakeuptime setFPWakeupTime failed! 19:07:56.240 mytest.py:712 runScreenTest [mytest.py] no set next wakeup time 19:07:56.240 mytest.py:714 runScreenTest ==================================================================================================== 19:07:56.267 Plugins/Extensions/AutoTimer/AutoTimer.py:126 readXml [AutoTimer] No configuration file present 19:07:56.268 Plugins/Extensions/Infopanel/plugin.py:213 camstart [Info-Panel] failed to write /proc/stb/video/alpha 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_left [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_top [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_width [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_height [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/0/dst_apply [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_left [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_top [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_width [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_height [No such file or directory] 19:07:56.269 ../lib/base/cfile.h:17 CFile error /proc/stb/vmpeg/1/dst_apply [No such file or directory] 19:07:56.295 dvb/db.cpp:639 saveServicelist ---- saving lame channel db 19:07:56.313 dvb/db.cpp:761 saveServicelist saved 175 channels and 2006 services! 19:07:56.338 dvb/dvb.cpp:1352 releaseCachedChannel release cached channel (timer timeout) 19:07:56.339 dvb/dvbtime.cpp:252 ~eDVBLocalTimeHandler set RTC to previous valid time 19:07:56.339 dvb/dvbtime.cpp:49 setRTC [eDVBLocalTimerHandler] set RTC Time 19:07:56.341 base/init.cpp:58 setRunlevel - (41) Stream server 19:07:56.341 base/init.cpp:58 setRunlevel - (41) Encoders 19:07:56.341 base/init.cpp:58 setRunlevel - (41) eServiceFactoryDVB 19:07:56.341 base/init.cpp:58 setRunlevel - (41) eServiceFactoryFS 19:07:56.341 base/init.cpp:58 setRunlevel - (41) eServiceFactoryMP3 19:07:56.342 base/init.cpp:58 setRunlevel - (41) eServiceFactoryM2TS 19:07:56.342 base/init.cpp:58 setRunlevel - (41) eServiceFactoryHDMI 19:07:56.342 base/init.cpp:58 setRunlevel - (41) eServiceFactoryDVD 19:07:56.342 base/init.cpp:58 setRunlevel - (40) eServiceCenter 19:07:56.342 service/service.cpp:125 ~eServiceCenter clear instance 19:07:56.342 base/init.cpp:58 setRunlevel - (35) CA handler 19:07:56.342 base/init.cpp:58 setRunlevel - (35) CI Slots 19:07:56.342 base/init.cpp:58 setRunlevel - (30) eActionMap 19:07:56.342 base/init.cpp:58 setRunlevel - (22) Hdmi CEC driver 19:07:56.342 base/init.cpp:58 setRunlevel - (21) input device driver 19:07:56.572 base/init.cpp:58 setRunlevel - (20) AVSwitch Driver 19:07:56.572 base/init.cpp:58 setRunlevel - (20) misc options 19:07:56.572 base/init.cpp:58 setRunlevel - (20) RC Input layer 19:07:56.572 base/init.cpp:58 setRunlevel - (20) UHF Modulator 19:07:56.572 base/init.cpp:58 setRunlevel - (20) DVB-CI UI 19:07:56.572 base/init.cpp:58 setRunlevel - (15) eWindowStyleManager 19:07:56.572 base/init.cpp:58 setRunlevel - (10) gRC 19:07:56.572 gdi/grc.cpp:56 ~gRC waiting for gRC thread shutdown 19:07:56.572 gdi/grc.cpp:58 ~gRC gRC thread has finished 19:07:56.573 base/init.cpp:58 setRunlevel - (9) Font Render Class 19:07:56.573 base/init.cpp:58 setRunlevel - (9) gLCDDC 19:07:56.573 base/init.cpp:58 setRunlevel - (9) GFBDC FBIO_SET_MANUAL_BLIT: Operation not permitted 19:07:56.573 base/init.cpp:58 setRunlevel - (8) graphics acceleration manager 19:07:56.573 base/init.cpp:58 setRunlevel - (5) Tuxtxt 19:07:56.573 base/init.cpp:58 setRunlevel - (1) Background File Eraser 19:07:56.573 base/init.cpp:63 setRunlevel reached rl -1 root@minixx8hplus:~# kodi

by **taki** » Sat Feb 18, 2017 6:01 pm

Openatv 6.0
Mp4 playing ok
Kodi start stop ok
Kodi 16 all addon ok all video ok
No tested usb tuner (may be play video but no audioo)

NOT --boxtype=wetekplay2 use odroid c2

Andyblack how I add dvb modules rootfs . Oe aliance compile all amlogic kernel modules but dont add rootfs. Also write ipk I add device config for autoload modules config.

by **andyblac** » Sat Feb 18, 2017 10:29 pm

taki wrote:Openatv 6.0
Mp4 playing ok
Kodi start stop ok
Kodi 16 all addon ok all video ok
No tested usb tuner (may be play video but no audioo)

NOT --boxtype=wetekplay2 use odroid c2

Andyblack how I add dvb modules rootfs . Oe aliance compile all amlogic kernel modules but dont add rootfs. Also write ipk I add device config for autoload modules config.

if openatv build them try

Code: Select all: opkg install xxxxxx

xxxxx = module name.

by **taki** » Wed Feb 22, 2017 2:03 am

I have two problemwith openatv.
1-I no add my remote (dont work I add my remote config but no work, no ir scancode on terminal console with dmesg)
2-No audio playing video (dsp problem) on openav movie player but kodi full work audio. (I add lib/firmware binary codeh)
I add turkish seyirturk add on and that is work. playing all video (how grab screen photo. dont work openwebif grabber)
here is log

Code: Select all: root@minixx8hplus:~# dmesg [ 254.388126@1] [dsp]dsp not running [ 254.388155@1] [dsp]dsp_release [ 254.389005@1] audiodsp allow sleep [ 254.492476@1] [dsp]dsp_open [ 254.492493@1] audiodsp prevent sleep [ 254.493339@1] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 254.498800@1] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 254.506459@1] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 254.510131@1] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 254.515862@1] reset dsp : dec opt=fffb, subid=0 [ 254.520351@1] [dsp]dsp reset now [ 274.528119@3] [dsp]dsp not running [ 274.528148@3] [dsp]dsp_release [ 274.528993@3] audiodsp allow sleep [ 274.632450@3] [dsp]dsp_open [ 274.632469@3] audiodsp prevent sleep [ 274.633324@3] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 274.638776@3] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 274.646473@3] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 274.650057@3] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 274.655841@3] reset dsp : dec opt=fffb, subid=0 [ 274.660331@3] [dsp]dsp reset now [ 294.688122@0] [dsp]dsp not running [ 294.688151@0] [dsp]dsp_release [ 294.689002@0] audiodsp allow sleep [ 294.792465@0] [dsp]dsp_open [ 294.792482@0] audiodsp prevent sleep [ 294.793325@0] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 294.798794@0] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 294.806478@0] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 294.810076@0] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 294.815862@0] reset dsp : dec opt=fffb, subid=0 [ 294.820360@0] [dsp]dsp reset now [ 314.828119@1] [dsp]dsp not running [ 314.828153@1] [dsp]dsp_release [ 314.828995@1] audiodsp allow sleep [ 314.832552@3] adec_release [ 314.835501@3] video_blackout_policy_store(1) [ 314.839281@3] DisableVideoLayer() [ 314.839360@0] VsyncDisableVideoLayer [ 314.846237@0] DisableVideoLayer() [ 314.849375@0] [tsync_avevent]event:2, param 0 [ 314.853670@0] video first pts = 0 [ 314.856952@0] di_uninit_buf keep cur di_buf 14 (2 3 -1) [ 314.862125@0] VsyncDisableVideoLayer [ 334.410370@0] video_blackout_policy_store(0) [ 334.416698@0] video first pts = 0 [ 334.478135@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1920/1080/0 [ 334.499349@0] vpts to scr, apts = 0x0, vpts = 0x0 [ 334.499379@0] [video4osd] first picture {1920,1080} pts:0, [ 334.504019@0] cur_dispbuf->width: 640 cur_dispbuf->height:360 -- vf->width:1920 vf->height:1080 [ 334.539351@0] VsyncEnableVideoLayer [ 334.599361@0] cur_dispbuf->width: 1920 cur_dispbuf->height:1080 -- vf->width:1920 vf->height:1080 [ 334.619349@0] recycle_keep_buffer recycle keep cur di_buf 14 ( 2 3 ) [ 336.552745@0] [tsync_avevent]event:2, param 0 [ 336.552770@0] video first pts = 0 [ 336.554757@0] di_uninit_buf keep cur di_buf 6 (6 7 -1) [ 343.904143@0] video_blackout_policy_store(0) [ 343.909256@0] video first pts = 0 [ 343.968139@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1920/1080/0 [ 343.979350@0] vpts to scr, apts = 0x0, vpts = 0x0 [ 343.979380@0] [video4osd] first picture {1920,1080} pts:0, [ 343.984023@0] cur_dispbuf->width: 1920 cur_dispbuf->height:1080 -- vf->width:1920 vf->height:1080 [ 343.999352@0] VsyncEnableVideoLayer [ 344.079352@0] recycle_keep_buffer recycle keep cur di_buf 6 ( 6 7 ) [ 346.041383@1] [tsync_avevent]event:2, param 0 [ 346.041410@1] video first pts = 0 [ 346.043387@0] di_uninit_buf keep cur di_buf 7 (4 5 -1) [ 395.508200@3] amvdec_h264 mem-addr=9a00000,buff_offset=8a00000,buf_start=9b3e000 [ 395.509945@3] H264 sysinfo: 640x360 duration=4004, pts_outside=1, sync_outside=0, use_idr_framerate=0,pts_unstable=0 [ 395.521874@3] 264 ucode swap area: physical address 0x2cc90000, cpu virtual addr f0ded000 [ 395.528491@3] start load original firmware ... [ 395.537112@3] video first pts = 0 [ 395.537472@1] audio first pts = 0 [ 395.539488@0] video first checkin pts = 1 [ 395.539627@3] [dsp]dsp_open [ 395.539630@3] audiodsp prevent sleep [ 395.540420@3] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 395.540429@3] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 395.552337@3] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 395.552709@3] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 395.552712@3] reset dsp : dec opt=fffb, subid=0 [ 395.552713@3] [dsp]dsp reset now [ 395.579971@0] first check in vpts <0x26:0x1> ok! [ 395.584542@1] first check in apts <0x0:0x1> ok! [ 395.585707@0] frame_mbs_only_flag 1, crop_bottom 4, frame_height 360, mb_height 23,crop_right 0, frame_width 640, mb_width 23 [ 395.585709@0] max_dpb 9 size:3686400 [ 395.603865@0] video first pts = 1 [ 395.611453@0] checkout pts jump,reset frame rate calculate:1,12511249 [ 395.628149@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/640/360/0 [ 395.639352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.659352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.679351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.699352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.719352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.739351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.759352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.779351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.799353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.819351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.839350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.859351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.879351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.899352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.919350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.939351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.959352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.979349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.999348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.019348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.039347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.059347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.079347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.099347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.119347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.139347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.159349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.179354@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.199351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.219348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.239347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.259346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.279346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.299349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.319347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.339348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.359348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.379352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.399348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.419352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.439348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.459349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.479346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.499349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.519351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.539351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.559354@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.579350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.599350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.619350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.639351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.659350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.679348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.699347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.719348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.739347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.759349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.779348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.799348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.819347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.839347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.859347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.879347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.899347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.919351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.939351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.959351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.979349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.999348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.019349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.039348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.059348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.079347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.099347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.119347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.139353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.159353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.179348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.199347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.219350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.239346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.259349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.279349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.299348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.319347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.339350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.359349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.379349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.399351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.419351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.439351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.459353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.479352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.499350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.519352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.539351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.559353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.579349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.599347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.619348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.639347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.659347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.679346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.699346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.719347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.739352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.759350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.779348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.799350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.819351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.839347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.859351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.879348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.899352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.919350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.939353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.959355@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.979351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.999350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.019353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.039353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.059350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.079348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.099349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.119348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.139351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.159351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.179351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.199350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.219348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.239349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.259348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.279351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.299350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.319349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.339351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.359351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.379350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.399350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.419349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.439349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.459352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.479353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.499351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.519352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.539350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.559353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.579351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.599349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.619349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.639348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.639380@0] [video4osd] first picture {640,360} pts:1, [ 398.643848@0] cur_dispbuf->width: 1920 cur_dispbuf->height:1080 -- vf->width:640 vf->height:360 [ 398.659353@0] VsyncEnableVideoLayer [ 398.719351@0] recycle_keep_buffer recycle keep cur di_buf 7 ( 4 5 ) [ 399.350273@0] pts_duration:4003,frame_dur=4004 root@minixx8hplus:~# dmesg [ 254.388126@1] [dsp]dsp not running [ 254.388155@1] [dsp]dsp_release [ 254.389005@1] audiodsp allow sleep [ 254.492476@1] [dsp]dsp_open [ 254.492493@1] audiodsp prevent sleep [ 254.493339@1] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 254.498800@1] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 254.506459@1] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 254.510131@1] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 254.515862@1] reset dsp : dec opt=fffb, subid=0 [ 254.520351@1] [dsp]dsp reset now [ 274.528119@3] [dsp]dsp not running [ 274.528148@3] [dsp]dsp_release [ 274.528993@3] audiodsp allow sleep [ 274.632450@3] [dsp]dsp_open [ 274.632469@3] audiodsp prevent sleep [ 274.633324@3] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 274.638776@3] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 274.646473@3] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 274.650057@3] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 274.655841@3] reset dsp : dec opt=fffb, subid=0 [ 274.660331@3] [dsp]dsp reset now [ 294.688122@0] [dsp]dsp not running [ 294.688151@0] [dsp]dsp_release [ 294.689002@0] audiodsp allow sleep [ 294.792465@0] [dsp]dsp_open [ 294.792482@0] audiodsp prevent sleep [ 294.793325@0] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 294.798794@0] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 294.806478@0] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 294.810076@0] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 294.815862@0] reset dsp : dec opt=fffb, subid=0 [ 294.820360@0] [dsp]dsp reset now [ 314.828119@1] [dsp]dsp not running [ 314.828153@1] [dsp]dsp_release [ 314.828995@1] audiodsp allow sleep [ 314.832552@3] adec_release [ 314.835501@3] video_blackout_policy_store(1) [ 314.839281@3] DisableVideoLayer() [ 314.839360@0] VsyncDisableVideoLayer [ 314.846237@0] DisableVideoLayer() [ 314.849375@0] [tsync_avevent]event:2, param 0 [ 314.853670@0] video first pts = 0 [ 314.856952@0] di_uninit_buf keep cur di_buf 14 (2 3 -1) [ 314.862125@0] VsyncDisableVideoLayer [ 334.410370@0] video_blackout_policy_store(0) [ 334.416698@0] video first pts = 0 [ 334.478135@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1920/1080/0 [ 334.499349@0] vpts to scr, apts = 0x0, vpts = 0x0 [ 334.499379@0] [video4osd] first picture {1920,1080} pts:0, [ 334.504019@0] cur_dispbuf->width: 640 cur_dispbuf->height:360 -- vf->width:1920 vf->height:1080 [ 334.539351@0] VsyncEnableVideoLayer [ 334.599361@0] cur_dispbuf->width: 1920 cur_dispbuf->height:1080 -- vf->width:1920 vf->height:1080 [ 334.619349@0] recycle_keep_buffer recycle keep cur di_buf 14 ( 2 3 ) [ 336.552745@0] [tsync_avevent]event:2, param 0 [ 336.552770@0] video first pts = 0 [ 336.554757@0] di_uninit_buf keep cur di_buf 6 (6 7 -1) [ 343.904143@0] video_blackout_policy_store(0) [ 343.909256@0] video first pts = 0 [ 343.968139@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1920/1080/0 [ 343.979350@0] vpts to scr, apts = 0x0, vpts = 0x0 [ 343.979380@0] [video4osd] first picture {1920,1080} pts:0, [ 343.984023@0] cur_dispbuf->width: 1920 cur_dispbuf->height:1080 -- vf->width:1920 vf->height:1080 [ 343.999352@0] VsyncEnableVideoLayer [ 344.079352@0] recycle_keep_buffer recycle keep cur di_buf 6 ( 6 7 ) [ 346.041383@1] [tsync_avevent]event:2, param 0 [ 346.041410@1] video first pts = 0 [ 346.043387@0] di_uninit_buf keep cur di_buf 7 (4 5 -1) [ 395.508200@3] amvdec_h264 mem-addr=9a00000,buff_offset=8a00000,buf_start=9b3e000 [ 395.509945@3] H264 sysinfo: 640x360 duration=4004, pts_outside=1, sync_outside=0, use_idr_framerate=0,pts_unstable=0 [ 395.521874@3] 264 ucode swap area: physical address 0x2cc90000, cpu virtual addr f0ded000 [ 395.528491@3] start load original firmware ... [ 395.537112@3] video first pts = 0 [ 395.537472@1] audio first pts = 0 [ 395.539488@0] video first checkin pts = 1 [ 395.539627@3] [dsp]dsp_open [ 395.539630@3] audiodsp prevent sleep [ 395.540420@3] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 395.540429@3] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 395.552337@3] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 395.552709@3] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 395.552712@3] reset dsp : dec opt=fffb, subid=0 [ 395.552713@3] [dsp]dsp reset now [ 395.579971@0] first check in vpts <0x26:0x1> ok! [ 395.584542@1] first check in apts <0x0:0x1> ok! [ 395.585707@0] frame_mbs_only_flag 1, crop_bottom 4, frame_height 360, mb_height 23,crop_right 0, frame_width 640, mb_width 23 [ 395.585709@0] max_dpb 9 size:3686400 [ 395.603865@0] video first pts = 1 [ 395.611453@0] checkout pts jump,reset frame rate calculate:1,12511249 [ 395.628149@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/640/360/0 [ 395.639352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.659352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.679351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.699352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.719352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.739351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.759352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.779351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.799353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.819351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.839350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.859351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.879351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.899352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.919350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.939351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.959352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.979349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 395.999348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.019348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.039347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.059347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.079347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.099347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.119347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.139347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.159349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.179354@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.199351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.219348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.239347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.259346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.279346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.299349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.319347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.339348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.359348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.379352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.399348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.419352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.439348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.459349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.479346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.499349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.519351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.539351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.559354@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.579350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.599350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.619350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.639351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.659350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.679348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.699347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.719348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.739347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.759349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.779348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.799348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.819347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.839347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.859347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.879347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.899347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.919351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.939351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.959351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.979349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 396.999348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.019349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.039348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.059348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.079347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.099347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.119347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.139353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.159353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.179348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.199347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.219350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.239346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.259349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.279349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.299348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.319347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.339350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.359349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.379349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.399351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.419351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.439351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.459353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.479352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.499350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.519352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.539351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.559353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.579349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.599347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.619348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.639347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.659347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.679346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.699346@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.719347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.739352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.759350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.779348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.799350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.819351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.839347@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.859351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.879348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.899352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.919350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.939353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.959355@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.979351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 397.999350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.019353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.039353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.059350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.079348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.099349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.119348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.139351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.159351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.179351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.199350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.219348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.239349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.259348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.279351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.299350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.319349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.339351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.359351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.379350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.399350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.419349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.439349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.459352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.479353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.499351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.519352@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.539350@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.559353@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.579351@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.599349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.619349@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.639348@0] vpts to scr, apts = 0x1, vpts = 0x1 [ 398.639380@0] [video4osd] first picture {640,360} pts:1, [ 398.643848@0] cur_dispbuf->width: 1920 cur_dispbuf->height:1080 -- vf->width:640 vf->height:360 [ 398.659353@0] VsyncEnableVideoLayer [ 398.719351@0] recycle_keep_buffer recycle keep cur di_buf 7 ( 4 5 ) [ 399.350273@0] pts_duration:4003,frame_dur=4004 [ 415.608120@2] [dsp]dsp not running [ 415.608152@2] [dsp]dsp_release [ 415.608997@2] audiodsp allow sleep [ 415.712450@2] [dsp]dsp_open [ 415.712469@2] audiodsp prevent sleep [ 415.713308@2] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 415.718776@2] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 415.726354@2] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 415.730068@2] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 415.735837@2] reset dsp : dec opt=fffb, subid=0 [ 415.740327@2] [dsp]dsp reset now [ 435.768125@3] [dsp]dsp not running [ 435.768157@3] [dsp]dsp_release [ 435.769003@3] audiodsp allow sleep [ 435.872472@3] [dsp]dsp_open [ 435.872490@3] audiodsp prevent sleep [ 435.873333@3] [dsp]DSP statck start =0x2db60000,size=0x10000 [ 435.878802@3] [dsp]DSP gp statck start =0x2d9f7200,size=0x200 [ 435.886406@3] [dsp]DSP heap start =0x2e000000,size=0x100000 [ 435.890089@3] [dsp]DSP stream buffer to [0x2da60000-0x2da67fe0] [ 435.895862@3] reset dsp : dec opt=fffb, subid=0 [ 435.900352@3] [dsp]dsp reset now

by **taki** » Wed Mar 08, 2017 5:52 am

andyblack I need your help. Enigma2 playing video this addon extension http://seyirturk.com/download/oe20.php
I can watch movie with seyirturk. My problem is audio. I no have audio. I add dumycodech in my kernel config. but anything is change.
I add patch alsa volume

Code: Select all: diff -Naur a/sound/soc/aml/m8/aml_i2s.c b/sound/soc/aml/m8/aml_i2s.c --- a/sound/soc/aml/m8/aml_i2s.c 2017-03-06 21:20:51.797651000 +0300 +++ b/sound/soc/aml/m8/aml_i2s.c 2017-03-07 19:10:52.000000000 +0300 @@ -43,6 +43,10 @@ #define ALSA_TRACE() #endif +extern int output_volume; //Volume control +extern struct mutex m_volume; //Volume mutex +#define VOL_CTL(s) ((unsigned int)(((signed short)(s))*(vol)) >> 15) //Volume scaling from 0~100 + unsigned int aml_i2s_playback_start_addr = 0; unsigned int aml_i2s_playback_phy_start_addr = 0; unsigned int aml_i2s_capture_start_addr = 0; @@ -680,6 +684,7 @@ struct aml_audio_buffer *tmp_buf = buffer->private_data; void *ubuf = tmp_buf->buffer_start; audio_stream_t *s = &prtd->s; + unsigned int vol; int force_reinit_958 = 0; force_reinit_958 = (IEC958_mode_codec == 0 && (READ_MPEG_REG(AIU_MEM_IEC958_START_PTR) != READ_MPEG_REG(AIU_MEM_I2S_START_PTR))); if (s && s->device_type == AML_AUDIO_I2SOUT && (trigger_underrun) && kernel_android_50 == 1) { @@ -718,11 +723,15 @@ if (pos % align) { printk("audio data unligned: pos=%d, n=%d, align=%d\n", (int)pos, n, align); } + mutex_lock(&m_volume); + vol = (output_volume * 0x8000) / 100; + mutex_unlock(&m_volume); + if (set_android_gain_enable == 0) { for (j = 0; j < n; j += 64) { for (i = 0; i < 16; i++) { - *left++ = (*tfrom++) ; - *right++ = (*tfrom++); + *left++ = (int16_t)(VOL_CTL(*tfrom++)); + *right++ = (int16_t)(VOL_CTL(*tfrom++)); } left += 16; right += 16; diff -Naur a/sound/soc/aml/m8/aml_m8.c b/sound/soc/aml/m8/aml_m8.c --- a/sound/soc/aml/m8/aml_m8.c 2017-03-06 21:20:51.797651000 +0300 +++ b/sound/soc/aml/m8/aml_m8.c 2017-03-07 19:46:01.000000000 +0300 @@ -631,6 +631,35 @@ return 0; } +int output_volume = 100; +struct mutex m_volume; + +static int pcm_pb_volume_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 100; + uinfo->value.integer.step = 1; + return 0; +} +static int pcm_pb_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uvalue) +{ + mutex_lock(&m_volume); + uvalue->value.integer.value[0] = output_volume & 0xff; + mutex_unlock(&m_volume); + return 0; +} +static int pcm_pb_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uvalue) +{ + mutex_lock(&m_volume); + output_volume = uvalue->value.integer.value[0]; + mutex_unlock(&m_volume); + return 0; + } static const struct snd_kcontrol_new aml_m8_controls[] = { //SOC_DAPM_PIN_SWITCH("Ext Spk"), @@ -645,6 +674,14 @@ SOC_SINGLE_BOOL_EXT("Ext Spk Switch", 0, aml_m8_get_spk, aml_m8_set_spk), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Volume", + .index = 0x00, + .info = pcm_pb_volume_info, + .get = pcm_pb_volume_get, + .put = pcm_pb_volume_put, + }, SOC_ENUM_EXT("HDMI Audio Type", hdmi_audio_type_enum, aml_hdmi_audio_type_get_enum, @@ -671,6 +708,7 @@ int hp_paraments[5]; printk(KERN_DEBUG "enter %s \n", __func__); + mutex_init(&m_volume); p_aml_audio = snd_soc_card_get_drvdata(card); ret = snd_soc_add_card_controls(codec->card, aml_m8_controls, ARRAY_SIZE(aml_m8_controls));

I want ask that you can play video with audio on odroid c2 (with enigma2)
where I mistake or this problem related e2_procfs

by **Phil333** » Sat Mar 11, 2017 11:37 am

nice project!

I own a VUsolo² mini. would it be possible(in future) to replace it with an Odroid C2 if I take a USB SVB-S2 Tuner?
Any ideas about the performance of this Amlogic A905 4x 1.50GHz (ARM Cortex A53) compared to the BROADCOM BCM7356 1300 MHz dual core?

by **segmant** » Sat Mar 11, 2017 4:08 pm

Do You can run enigma2 for k1plus?
CPU: S905 Cortex-A53

by **taki** » Sun Mar 12, 2017 4:49 am

Phil333
I have vuduo. I can say that s812 faster than broadcom cpu. Very very fast boot and gui. Only problem old kernel and no puplic e2procfs drivers.

by **Phil333** » Mon Mar 13, 2017 9:43 pm

But as far as I understand, one the guy for the WeTek e2procfs is working on a e2procfs driver right?

Is there any developement regarding a 4.x kernel for ORDOID C2?

by **taki** » Mon Feb 12, 2018 6:35 pm

taki wrote:ng to get him to help with Ordroid one, I'll keep you informed.

do you have any news for e2-procfs from amlogic or wetek

by **rooted** » Mon Feb 12, 2018 9:49 pm

taki wrote:
taki wrote:ng to get him to help with Ordroid one, I'll keep you informed.

do you have any news for e2-procfs from amlogic or wetek

You may be able to test on latest mainline kernel if that is what you need.

viewtopic.php?p=214635#p214635

by **csucsu** » Thu May 17, 2018 5:26 pm

Hi All,

there are new activities on the amlogic platform on the oe-alliance repo... https://github.com/oe-alliance/oe-alliance-core

best regards,

by **moham96** » Mon Jul 09, 2018 7:51 am

This might give the project a kick.
A user from libreelec forums has reverse engineered Wetek e2procfs and released the source code, unfortunately, the module was written for the old 3.10 kernel
The pli-extras project hosted the files on their repo
https://github.com/PLi-metas/amlogic-e2-procfs/
Can someone port the module to the newer 3.14.29 kernel?

by **moham96** » Wed Jul 11, 2018 3:26 pm

moham96 wrote:This might give the project a kick.
A user from libreelec forums has reverse engineered Wetek e2procfs and released the source code, unfortunately, the module was written for the old 3.10 kernel
The pli-extras project hosted the files on their repo
https://github.com/PLi-metas/amlogic-e2-procfs/
Can someone port the module to the newer 3.14.29 kernel?

I tried to port the module to the newer kernel(3.14.29)
the problem is that some functions were removed from the Linux headers in 3.10.x
So we have to use the functions in the drivers' tree
I used the functions from the osd_hw.h file and the module compiles partially (couldn't test if it works)
the problem is in the e2_procfs_fp.c file
I can't find a header file that implements the functions required by this file (e.g rtc_set_alarm_aml)
I have never programmed in c so this is just a shot in the dark, any help would be appreciated

by **taki** » Wed Jul 11, 2018 6:48 pm

moham96 wrote:
moham96 wrote:This might give the project a kick.
A user from libreelec forums has reverse engineered Wetek e2procfs and released the source code, unfortunately, the module was written for the old 3.10 kernel
The pli-extras project hosted the files on their repo
https://github.com/PLi-metas/amlogic-e2-procfs/
Can someone port the module to the newer 3.14.29 kernel?

I tried to port the module to the newer kernel(3.14.29)
the problem is that some functions were removed from the Linux headers in 3.10.x
So we have to use the functions in the drivers' tree
I used the functions from the osd_hw.h file and the module compiles partially (couldn't test if it works)
the problem is in the e2_procfs_fp.c file
I can't find a header file that implements the functions required by this file (e.g rtc_set_alarm_aml)
I have never programmed in c so this is just a shot in the dark, any help would be appreciated

Look at this patch for rtc
https://github.com/wetek-enigma/linux-w ... a93082cc51
+EXPORT_SYMBOL(rtc_set_alarm_aml);

other issue wetek use "extern int wetekfb_set_display(char *);" have be change for k series
https://github.com/PLi-metas/amlogic-e2 ... fs_vmode.c

by **moham96** » Wed Jul 11, 2018 8:02 pm

taki wrote:
moham96 wrote:
moham96 wrote:This might give the project a kick.
A user from libreelec forums has reverse engineered Wetek e2procfs and released the source code, unfortunately, the module was written for the old 3.10 kernel
The pli-extras project hosted the files on their repo
https://github.com/PLi-metas/amlogic-e2-procfs/
Can someone port the module to the newer 3.14.29 kernel?

I tried to port the module to the newer kernel(3.14.29)
the problem is that some functions were removed from the Linux headers in 3.10.x
So we have to use the functions in the drivers' tree
I used the functions from the osd_hw.h file and the module compiles partially (couldn't test if it works)
the problem is in the e2_procfs_fp.c file
I can't find a header file that implements the functions required by this file (e.g rtc_set_alarm_aml)
I have never programmed in c so this is just a shot in the dark, any help would be appreciated

Look at this patch for rtc
https://github.com/wetek-enigma/linux-w ... a93082cc51
+EXPORT_SYMBOL(rtc_set_alarm_aml);

other issue wetek use "extern int wetekfb_set_display(char *);" have be change for k series
https://github.com/PLi-metas/amlogic-e2 ... fs_vmode.c

Yes, I have already exported the symbols of osd_hw, for the arml_rtc the module can't see the symbols for some reason, I think it has to be in a header file instead of a driver, I will test and investigate more when I have time.

by **moham96** » Wed Jul 11, 2018 9:05 pm

@taki Ok I fixed the rtc functions problem(I think) but can't find any 3.10 kernel source that has the wetekfb_set_display function! Is this part of the original proprietary e2procfs module by wetek?

by **taki** » Wed Jul 11, 2018 9:47 pm

moham96 wrote:@taki Ok I fixed the rtc functions problem(I think) but can't find any 3.10 kernel source that has the wetekfb_set_display function! Is this part of the original proprietary e2procfs module by wetek?

look 3.10 dtb
https://github.com/wetek-enigma/linux-w ... ekplay.dtd

/// -   DISP&MM-FB
//$$ MODULE = "DISP&MM-FB"
//$$ DEVICE = "mesonfb"
//$$ L2 PROP_STR = "status"
//$$ L3 PROP_U32 2 ="reserve-memory"
//$$ L2 PROP_U32 = "vmode"
//$$ L2 PROP_U32 5 = "display_size_default"
	mesonfb{
		compatible = "amlogic,mesonfb";
		dev_name = "mesonfb";
		status = "okay";
		reserve-memory = <0x01800000 0x01800000>;
		reserve-iomap = "true";
	  vmode = <0>; /*0:VMODE_720P 1:VMODE_LCD  2:VMODE_LVDS_1080P 3:VMODE_1080P*/
	  scale_mode = <0>; /*0:default 1:new*/
	  display_size_default = <1280 720 1280 2160 32>;  // osd0:8M, osd1:1m  1280*720*4*3 = 11,059,200
	};

	wetekfb{
		compatible = "amlogic,wetekfb";
		dev_name = "wetekfb.0";
		status = "okay";
		reserve-memory = <0x01800000>;
		reserve-iomap = "true";
	};

look 3.14 kwenwl wp2 s905 dts

https://github.com/wetek-enigma/linux-w ... 200_2G.dts

};
		fb_reserved:linux,meson-fb {
			compatible = "amlogic, fb-memory";
			size = <0x0 0x4480000>;
			no-map;
		};
		wetekplay_reserved:linux,wetekfb {
			compatible = "amlogic, wetek-memory";
			size = <0x0 0x2000000>;
			no-map;
		};

but lindroid dtb dont use wetek fb
https://github.com/oe-alliance/oe-allia ... alien5.dts

};
		fb_reserved:linux,meson-fb {
			compatible = "amlogic, fb-memory";
			reg = <0x0 0x7e000000 0x0 0x2000000>;
			no-map;
		};

by **moham96** » Wed Jul 11, 2018 9:54 pm

Yay, I got the module to compile and work on kernel 3.14.29
I have those nodes currently:

Code: Select all: /proc/stb/ /proc/stb/aml /proc/stb/aml/osdinfo /proc/stb/aml/videoinfo /proc/stb/player /proc/stb/player/version /proc/stb/stream /proc/stb/stream/policy /proc/stb/stream/policy/MPEG2_IGNORE_PROGESSIVE_FRAME_FLAG /proc/stb/stream/policy/H264_ALLOW_NON_IDR_RESYNCHRONIZATION /proc/stb/stream/policy/LOWER_CODEC_DECODE_LIMITS_ON_FRAME_DECODE_LATE /proc/stb/stream/policy/REBASE_ON_FRAME_DECODE_LATE /proc/stb/stream/policy/REBASE_ON_DATA_DELIVERY_LATE /proc/stb/stream/policy/DISCARD_LATE_FRAMES /proc/stb/stream/policy/TRICK_MODE_DOMAIN /proc/stb/stream/policy/PLAYOUT_ON_DRAIN /proc/stb/stream/policy/PLAYOUT_ON_SWITCH /proc/stb/stream/policy/PLAYOUT_ON_TERMINATE /proc/stb/stream/policy/STREAM_SINGLE_GROUP_BETWEEN_DISCONTINUITIES /proc/stb/stream/policy/STREAM_ONLY_KEY_FRAMES /proc/stb/stream/policy/DISPLAY_FIRST_FRAME_EARLY /proc/stb/stream/policy/EXTERNAL_TIME_MAPPING /proc/stb/stream/policy/MASTER_CLOCK /proc/stb/stream/policy/PLAY_24FPS_VIDEO_AT_25FPS /proc/stb/stream/policy/TRICK_MODE_AUDIO /proc/stb/stream/policy/AV_SYNC /proc/stb/hdmi /proc/stb/hdmi/audio_source_choices /proc/stb/hdmi/audio_source /proc/stb/hdmi/output_choices /proc/stb/hdmi/output /proc/stb/hdmi/enable_hdmi_resets /proc/stb/hdmi/bypass_edid_checking /proc/stb/vmpeg /proc/stb/vmpeg/1 /proc/stb/vmpeg/1/framerate /proc/stb/vmpeg/1/aspect /proc/stb/vmpeg/1/xres /proc/stb/vmpeg/1/yres /proc/stb/vmpeg/1/dst_all /proc/stb/vmpeg/1/dst_height /proc/stb/vmpeg/1/dst_width /proc/stb/vmpeg/1/dst_top /proc/stb/vmpeg/1/dst_left /proc/stb/vmpeg/0 /proc/stb/vmpeg/0/framerate /proc/stb/vmpeg/0/aspect /proc/stb/vmpeg/0/xres /proc/stb/vmpeg/0/yres /proc/stb/vmpeg/0/dst_all /proc/stb/vmpeg/0/dst_height /proc/stb/vmpeg/0/dst_width /proc/stb/vmpeg/0/dst_top /proc/stb/vmpeg/0/dst_left /proc/stb/misc /proc/stb/misc/12V_output /proc/stb/tsmux /proc/stb/tsmux/lnb_b_input /proc/stb/tsmux/ci1_input /proc/stb/tsmux/ci0_input /proc/stb/tsmux/input1 /proc/stb/tsmux/input0 /proc/stb/fp /proc/stb/fp/rtc /proc/stb/fp/was_timer_wakeup /proc/stb/fp/wakeup_time /proc/stb/fp/version /proc/stb/fp/led_pattern_speed /proc/stb/fp/led0_pattern /proc/stb/fp/lnb_sense2 /proc/stb/fp/lnb_sense1 /proc/stb/fb /proc/stb/fb/znorm /proc/stb/fb/3dmode /proc/stb/denc /proc/stb/denc/0 /proc/stb/denc/0/wss_choices /proc/stb/denc/0/wss /proc/stb/avs /proc/stb/avs/0 /proc/stb/avs/0/standby /proc/stb/avs/0/input_choices /proc/stb/avs/0/volume /proc/stb/avs/0/sb /proc/stb/avs/0/input /proc/stb/avs/0/fb /proc/stb/avs/0/colorformat_choices /proc/stb/avs/0/colorformat /proc/stb/video /proc/stb/video/plane /proc/stb/video/plane/psi_apply /proc/stb/video/plane/psi_tint /proc/stb/video/plane/psi_contrast /proc/stb/video/plane/psi_saturation /proc/stb/video/plane/psi_brightness /proc/stb/video/pal_h_end /proc/stb/video/pal_h_start /proc/stb/video/pal_v_end /proc/stb/video/pal_v_start /proc/stb/video/videomode_preferred /proc/stb/video/videomode_60hz_choices /proc/stb/video/videomode_50hz_choices /proc/stb/video/videomode_choices /proc/stb/video/videomode_60hz /proc/stb/video/videomode_50hz /proc/stb/video/3d_mode /proc/stb/video/videomode /proc/stb/video/policy_choices /proc/stb/video/policy /proc/stb/video/force_dvi /proc/stb/video/aspect_choices /proc/stb/video/aspect /proc/stb/info /proc/stb/info/chipset /proc/stb/info/boxtype /proc/stb/info/model /proc/stb/audio /proc/stb/audio/ac3_choices /proc/stb/audio/j1_mute /proc/stb/audio/audio_delay_bitstream /proc/stb/audio/audio_delay_pcm /proc/stb/audio/ac3

for the wetekfb_set_display function I just commented it out for now
one problem is the dvb front end type is not detected properly:

Code: Select all: root@amlogic$ cat /proc/bus/nim_sockets NIM Socket 0: Type: UNDEFINED Name: Availink avl6862 Frontend_Device: 0

by **moham96** » Wed Jul 11, 2018 9:58 pm

taki wrote:
moham96 wrote:@taki Ok I fixed the rtc functions problem(I think) but can't find any 3.10 kernel source that has the wetekfb_set_display function! Is this part of the original proprietary e2procfs module by wetek?

look 3.10 dtb
https://github.com/wetek-enigma/linux-w ... ekplay.dtd
/// - DISP&MM-FB //$$ MODULE = "DISP&MM-FB" //$$ DEVICE = "mesonfb" //$$ L2 PROP_STR = "status" //$$ L3 PROP_U32 2 ="reserve-memory" //$$ L2 PROP_U32 = "vmode" //$$ L2 PROP_U32 5 = "display_size_default" mesonfb{ compatible = "amlogic,mesonfb"; dev_name = "mesonfb"; status = "okay"; reserve-memory = <0x01800000 0x01800000>; reserve-iomap = "true"; vmode = <0>; /*0:VMODE_720P 1:VMODE_LCD 2:VMODE_LVDS_1080P 3:VMODE_1080P*/ scale_mode = <0>; /*0:default 1:new*/ display_size_default = <1280 720 1280 2160 32>; // osd0:8M, osd1:1m 1280*720*4*3 = 11,059,200 }; wetekfb{ compatible = "amlogic,wetekfb"; dev_name = "wetekfb.0"; status = "okay"; reserve-memory = <0x01800000>; reserve-iomap = "true"; };

look 3.14 kwenwl wp2 s905 dts

https://github.com/wetek-enigma/linux-w ... 200_2G.dts

}; fb_reserved:linux,meson-fb { compatible = "amlogic, fb-memory"; size = <0x0 0x4480000>; no-map; }; wetekplay_reserved:linux,wetekfb { compatible = "amlogic, wetek-memory"; size = <0x0 0x2000000>; no-map; };
but lindroid dtb dont use wetek fb
https://github.com/oe-alliance/oe-allia ... alien5.dts

}; fb_reserved:linux,meson-fb { compatible = "amlogic, fb-memory"; reg = <0x0 0x7e000000 0x0 0x2000000>; no-map; };

Well, I wanted a source file from the wetek linux tree that implement the wetekfb_set_display function so I can replicate the function in the module, anyway I think the function is not present in the linux source code, instead It is part of the original e2procfs.ko blob that wetek uses:

Code: Select all: root@mohammad$ readelf -s e2-procfs.ko|grep wetek 354: 00000000 0 NOTYPE GLOBAL DEFAULT UND wetekfb_set_display

by **taki** » Wed Jul 11, 2018 10:02 pm

afl1 should be help for avl68xx driver (multi tuner)
https://github.com/afl1/LibreELEC.tv
puplic wetek enigma 2 3.14.29 kernel
https://github.com/wetek-enigma/linux-wetek-3.14.y
other hand we have to compare linkdroid http://source.mynonpublic.com/linkdroid ... 531.tar.gz kernel to wetek linux-wetek-3.14.y

by **moham96** » Wed Jul 11, 2018 10:50 pm

taki wrote:afl1 should be help for avl68xx driver (multi tuner)
https://github.com/afl1/LibreELEC.tv
I've tried to contact afl1 before through the coreelec forum and didn't get a respone, the avl drivers repo that he maintains on github has the issue reporting disable so I don't know how to discuss issues regarding the driver, I think he has no interest in improving the drivers.
taki wrote:puplic wetek enigma 2 3.14.29 kernel
https://github.com/wetek-enigma/linux-wetek-3.14.y
other hand we have to compare linkdroid http://source.mynonpublic.com/linkdroid ... 531.tar.gz kernel to wetek linux-wetek-3.14.y

I've already searched the source code of wetek Linux (3.14 and 3.10) and didn't get any result, as I said the function is probably built into the e2procfs, I don't know why CSylvain didn't reverse engineer that function! Maybe It's in another module from wetek that is provided as a closed blob?

by **taki** » Wed Jul 11, 2018 10:53 pm

moham96 wrote:
taki wrote:afl1 should be help for avl68xx driver (multi tuner)
https://github.com/afl1/LibreELEC.tv
I've tried to contact afl1 before through the coreelec forum and didn't get a respone, the avl drivers repo that he maintains on github has the issue reporting disable so I don't know how to discuss issues regarding the driver, I think he has no interest in improving the drivers.
taki wrote:puplic wetek enigma 2 3.14.29 kernel
https://github.com/wetek-enigma/linux-wetek-3.14.y
other hand we have to compare linkdroid http://source.mynonpublic.com/linkdroid ... 531.tar.gz kernel to wetek linux-wetek-3.14.y

I've already searched the source code of wetek Linux (3.14 and 3.10) and didn't get any result, as I said the function is probably built into the e2procfs, I don't know why CSylvain didn't reverse engineer that function! Maybe It's in another module from wetek that is provided as a closed blob?

wetekfb_set_display may be in wetek uboot

by **moham96** » Wed Jul 11, 2018 11:33 pm

taki wrote:
moham96 wrote:
taki wrote:afl1 should be help for avl68xx driver (multi tuner)
https://github.com/afl1/LibreELEC.tv
I've tried to contact afl1 before through the coreelec forum and didn't get a respone, the avl drivers repo that he maintains on github has the issue reporting disable so I don't know how to discuss issues regarding the driver, I think he has no interest in improving the drivers.
taki wrote:puplic wetek enigma 2 3.14.29 kernel
https://github.com/wetek-enigma/linux-wetek-3.14.y
other hand we have to compare linkdroid http://source.mynonpublic.com/linkdroid ... 531.tar.gz kernel to wetek linux-wetek-3.14.y

I've already searched the source code of wetek Linux (3.14 and 3.10) and didn't get any result, as I said the function is probably built into the e2procfs, I don't know why CSylvain didn't reverse engineer that function! Maybe It's in another module from wetek that is provided as a closed blob?

wetekfb_set_display may be in wetek uboot

Can't be, the kernel can't call a function from u-boot, u-boot is deleted from memory once the kernel is executed

by **taki** » Thu Jul 12, 2018 1:50 am

dtb wetekfb create reserved memory on ram after e2procfs use this memory

by **taki** » Thu Jul 12, 2018 4:07 am

For dvb tuner have to be modification nimdetect.c and h
Avl6862
https://github.com/CoreELEC/linux-amlog ... imdetect.c
https://github.com/CoreELEC/linux-amlog ... imdetect.h
tuner i2c number (for exemple )
{
.tuner_address = 0xC2,
.tuner_i2c_clock = 200,
.demod_address = 0x0C,
.mpeg_pol = 1,
.mpeg_mode = 0,
.mpeg_format = 0,
.demod_refclk = 9,
.mpeg_pin = 0,
.tuner_rfagc = 1,
.tuner_spectrum = 0,
.use_lnb_pin59 = 1,
.use_lnb_pin60 = 0,
.set_external_vol_gpio = set_external_vol_gpio,
}