Ubuntu 13.10 Dream Machine for ODROID-X (20140101)

Moderators: odroid, mdrjr

Ubuntu 13.10 Dream Machine for ODROID-X (20140101)

Unread postby robroy » Fri Jun 28, 2013 4:37 pm

I created an Ubuntu 13.10 Saucy Salamander image, forked from the official XFCE Hard Kernel release, with a core suite of applications for a netbook/desktop computer.

Download the image here:
13.10 Saucy Salamander: http://oph.mdrjr.net/robroyhall/images/ubuntu/x/Ubuntu-13.10_DreamMachine-X-HDMI.20140101.img.xz
13.04 Raring Ringtail: http://oph.mdrjr.net/robroyhall/images/ubuntu/x/Ubuntu-13.04_DreamMachine-X-HDMI.20140101.img.xz

European mirror by @traxo:
http://odroid.txmonitor.de/

Want to upgrade your existing Dream Machine image?
Kernel updates: http://builder.mdrjr.net/tools/kernel-update.sh

Username: odroid
Password: odroid

Username: root
Password: odroid

Applications: Firefox, Chromium, Xine, XBMC, Gimp, Transmission, Filezilla and Oracle JDK 8.

X11 environments: Lubuntu (LXDE), Kubuntu (KDE), Razor, Blackbox, Openbox, Matchbox and Xubuntu (XFCE).

You may switch environments using the dropdown on the login screen after logging out of KDE Plasma Workspace. For best XBMC performance, use any desktop environment except for KDE.

If you enjoy my contributions to the Hard Kernel community, please consider donating an amount of your choice via the link in my signature.

Customizations left for you upon burning the image to your card:
    1. Resize the "rootfs" partition to fit your SD card. This is best done on another Linux system using the GParted utility.
    2. Set your time zone using System Settings -> Time & Date.
    3. Set your language using System Settings -> Language Settings.
    4. Set your username and password using System Settings -> User Accounts.
Improvements and upgrades:
    1. To overclock to 1.92GHz, type "sudo gedit /etc/rc.local" in Terminal and remove the "#" from the beginning of the line that starts with "echo 1920000".
    2. Firefox has the IcedTea7 plugin installed for Java browser applets, and uses the built-in HTML5 player which is not compatible with Flash. Chromium has the Pepper Flash plugin installed for viewing Flash videos. Both Chromium and Firefox have the Adblock Plus add-on. The default browser is Firefox.
    3. All upgrades and updates have been run using aptitude, apt-get and synaptic.
    4. All orphaned and obsolete packages have been purged, including the original kernel.
    5. Lots of quality-of-life tweaks, such as setting folder preferences to List View, removing the Battery icon from the Status bar, setting the Chromium and Firefox preferences to their highest privacy settings, and installing wallpapers (/usr/share/wallpapers).
Features in this release:
Notes:
    XBMC performs best when the resolution is set to 720p, which is done by typing "sudo cp /media/boot/boot-720.scr /media/boot/boot.scr" in the Terminal window before rebooting.

    Xubuntu window compositing is turned off by default for an optimized XBMC experience. To restore compositing, select "System Settings -> Window Manager Tweaks" from the Applications menu. With compositing on, you may adjust window transparency by holding down the ALT key and scrolling the mouse wheel while hovering over the window's title bar.

    Vino VNC server may be started via SSH by typing "vino" after enabling Desktop Sharing using "vino-preferences".

    To boot directly to the most recently used desktop environment, type "sudo /usr/lib/lightdm/lightdm-set-defaults --autologin odroid" in Terminal, which bypasses the login screen.

    The default KDE Plasma Workspace is hardware accelerated, which can be extended to any other desktop environment by enabling the "Kwin GLES Hardware-Accelerated Desktop Manager" task in the Startup settings of the environment. Please note that Kwin GLES affects XBMC speed, so only KDE Plasma Workspace has Kwin GLES enabled by default.

    Optional USB and TFTP boot support is available with the updated bootloader by @suriyan (more here: viewtopic.php?f=10&t=2722)

    More Odroid software by @meveric is available here: http://oph.mdrjr.net/meveric/repository

    Image
Last edited by robroy on Fri Jan 03, 2014 2:09 am, edited 63 times in total.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby jupo » Fri Jul 05, 2013 3:52 am

This sounds awesome! :D Don't know how many countless hours I've spent tweaking here and there to achieve basically the same result. Nice to have it in a pre-compiled image file. Great work!
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby robroy » Sat Jul 06, 2013 1:27 am

jupo wrote:This sounds awesome! :D Don't know how many countless hours I've spent tweaking here and there to achieve basically the same result. Nice to have it in a pre-compiled image file. Great work!


Thank you! I spent the same countless hours getting things "perfect".

If you enjoy the convenience of this image, you can show support and appreciation for leading-edge Odroid development via the link in my signature :)

Keep an eye on the ODROID-X forums for my upcoming Professional Series of turn-key operating systems customized for web development and other creative spheres.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby profitvess » Wed Jul 10, 2013 4:40 pm

Hi,
Is it possible to install the DreamMashine image on EMMC using the following command?
sudo xzcat /Ubuntu-13.04_DreamMachine-HDMI-X.20130628.img.xz | sudo dd of=/dev/mmcblk0 bs=4M
sync

I followed the instructions in viewtopic.php?f=22&t=889 for xubuntu-13.04-desktop-armhf_odroidx_20130502_with_HDMI.img.xz image and it worked fine, but when I do the same for the DreamMashine image, my Oroid-X won’t boot at all. One of the blue LEDs blinks with no particular pattern for few seconds and that’s it.
I don’t have the EMMC to SD adaptor in order to write the image directly with Win32DiskImager.
Thanks
profitvess
 
Posts: 6
Joined: Fri Mar 01, 2013 11:22 pm
languages_spoken: english
ODROIDs: ODROID-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby robroy » Wed Jul 10, 2013 10:00 pm

I followed the instructions in viewtopic.php?f=22&t=889 for xubuntu-13.04-desktop-armhf_odroidx_20130502_with_HDMI.img.xz image and it worked fine, but when I do the same for the DreamMashine image, my Oroid-X won’t boot at all. One of the blue LEDs blinks with no particular pattern for few seconds and that’s it.

Do you have an SD card that you can use to check that the image that you downloaded is intact?

I have an Odroid-X2 but not an -X, so I may need to do some further adjustments.

Please let me know if the SD card version boots on your -X.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby robroy » Thu Jul 11, 2013 2:44 am

profitvess wrote:Hi,
Is it possible to install the DreamMashine image on EMMC using the following command?
sudo xzcat /Ubuntu-13.04_DreamMachine-HDMI-X.20130628.img.xz | sudo dd of=/dev/mmcblk0 bs=4M
sync


Yes, it is, but you will need the USB-UART adapter to use the alternate method (or very fast fingers): http://fw.hardijzer.nl/?p=200
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby profitvess » Thu Jul 11, 2013 3:00 pm

Hi robroyhall,
Thanks for your prompt reply.
Please let me know if the SD card version boots on your -X.

I’m writing the image to SD now, but I won’t be able to test it till later today. Meanwhile, I captured a boot log with my USB-UART adapter during the EMMC boot:
Code: Select all
 
U-Boot 2010.12-svn (Jan 28 2013 - 14:10:19) for Exynox4412


CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1000MHz, MPLL = 880MHz
DRAM:  2047 MiB

PMIC VERSION : 0x00, CHIP REV : 2
TrustZone Enabled BSP
BL1 version: 20121128


Checking Boot Mode ... EMMC4.41
REVISION: 1.1
Manufacturer TOSHIBA [ 15028MB ]
NAME: S5P_MSHC4
MMC Device 0: 15028 MB
MMC Device 1: 0 MB
MMC Device 2 not found
ModeKey Check... run normal_boot
Net:   No ethernet found.
Hit any key to stop autoboot:  0
NAME: S5P_MSHC4
NAME: S5P_MSHC4
>>> Load Boot Script from mmc 0:1 <<<
NAME: S5P_MSHC4
Partition1: Start Address(0x1000), Size(0x40000)
reading boot.scr
Warning : Reads a file that is smaller than the cluster size.

485 bytes read
## Executing script at 40008000
NAME: S5P_MSHC4
Partition1: Start Address(0x1000), Size(0x40000)
reading zImage

2313808 bytes read
NAME: S5P_MSHC4
Partition1: Start Address(0x1000), Size(0x40000)
reading uInitrd

2788215 bytes read
Boot with zImage
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    2788151 Bytes = 2722 KiB
   Load Address: 00000000
   Entry Point:  00000000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0xa00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.8.13.3-robroyhall-odroidx (root@odroid) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #1 SMP PREEMPT Wed Jun 26 09:41:15 PDT 2013 ()
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ODROIDX
[    0.000000] cma: CMA: reserved 8 MiB at 43000000
[    0.000000] cma: CMA: reserved 8 MiB at 51000000
[    0.000000] cma: CMA: reserved 32 MiB at 6d800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] CPU EXYNOS4412 (id 0xe4412211)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] s3c_register_clksrc: clock armclk has no registers set
[    0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[    0.000000] audiocdclk: no parent clock specified
[    0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
[    0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
[    0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
[    0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
[    0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
[    0.000000] Running under secure firmware.
[    0.000000] PERCPU: Embedded 7 pages/cpu @c0e6c000 s7936 r8192 d12544 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259842
[    0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=1023M console=tty1 console=ttySAC1,115200n8 hdtv_type=hdmi hdtv_format=1080p60hz root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=1023M
[    0.000000] s5p-tv: HDTV TYPE is hdmi
[    0.000000] s5p-tv: HDTV FORMAT is 1080p60hz
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 1023MB = 1023MB total
[    0.000000] Memory: 979848k/1959696k available, 135408k reserved, 269312K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05971d4   (5693 kB)
[    0.000000]       .init : 0xc0598000 - 0xc05c1f00   ( 168 kB)
[    0.000000]       .data : 0xc05c2000 - 0xc0624500   ( 394 kB)
[    0.000000]        .bss : 0xc0624500 - 0xc065f6d0   ( 237 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:549
[    0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[    0.045000] pid_max: default: 32768 minimum: 301
[    0.045000] Mount-cache hash table entries: 512
[    0.045000] Initializing cgroup subsys cpuacct
[    0.045000] Initializing cgroup subsys devices
[    0.045000] CPU: Testing write buffer coherency: ok
[    0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[    0.045000] Setting up static identity map for 0x4041f930 - 0x4041f988
[    0.045000] L310 cache controller enabled
[    0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[    0.075000] CPU1: Booted secondary processor
[    0.095000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[    0.105000] CPU2: Booted secondary processor
[    0.125000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[    0.135000] CPU3: Booted secondary processor
[    0.155000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[    0.155000] Brought up 4 CPUs
[    0.155000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[    0.155000] devtmpfs: initialized
[    0.160000] regulator-dummy: no parameters
[    0.160000] NET: Registered protocol family 16
[    0.170000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.180000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.180000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.180000] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.180000] EXYNOS4x12 PMU Initialize
[    0.180000] EXYNOS: Initializing architecture
[    0.180000] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
[    0.195000] bio: create slab <bio-0> at 0
[    0.195000] hdmi_5v: 5000 mV
[    0.195000] usbcore: registered new interface driver usbfs
[    0.195000] usbcore: registered new interface driver hub
[    0.195000] usbcore: registered new device driver usb
[    0.195000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.0: bus frequency set to 71 KHz
[    0.200000] max77686 0-0009: device found
[    0.200000] max77686 0-0009: irq is not specified
[    0.225000] LDO1 VDD_ALIVE: 1000 mV
[    0.255000] LDO2 VDDQ_M1_1V8: 1200 mV
[    0.285000] LDO3 VDDQ_AUD_1V8: 1800 mV
[    0.315000] LDO4 VDDQ_MMC2_2V8: 2800 mV
[    0.345000] LDO5 VDDQ_MMC1_1V8: 1800 mV
[    0.380000] LDO6 VDD10_MPLL_1V0: 1000 mV
[    0.415000] LDO7 VDD10_EPLL_1V0: 1000 mV
[    0.445000] LDO8 VDD10_MIPI_1V0: 1000 mV
[    0.480000] LDO9 VT_CORE_1V0: 1000 mV
[    0.500000] LDO10 VDD18_MIPI_1V8: 1800 mV
[    0.530000] LDO11 VDD18_ABB1_1V8: 1800 mV
[    0.550000] vdd_ldo12 range: 3300 mV
[    0.580000] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
[    0.610000] LDO14 VDD18_ADC_1V8: 1800 mV
[    0.630000] vdd_ldo15 range: 1000 mV
[    0.660000] LDO16 VDD18_HSIC: 1800 mV
[    0.695000] LDO17 VDDQ_CAM_1V8: 1800 mV
[    0.725000] LDO18 VDDQ_ISP_1V8: 1800 mV
[    0.730000] LDO19 VT_CAM_1V8: 1800 mV
[    0.745000] LDO20 EMMC_IO_1V8: 1800 mV
[    0.775000] LDO21 TFLASH_2V8: 2800 mV
[    0.795000] LDO22 2V8: 2800 mV
[    0.830000] LDO23 VDD_TOUCH_2V8: 2800 mV
[    0.865000] LDO24 VDD_TOUCHLED_3V3: 3300 mV
[    0.900000] LDO25 VDDQ_LCD_3V0: 1800 mV
[    0.930000] LDO26 VDD_MOTOR_3V0: 3000 mV
[    0.940000] BUCK1 vdd_mif: 1100 mV
[    0.955000] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
[    0.965000] BUCK3 vdd_int: 1125 mV
[    0.980000] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
[    1.010000] BUCK5 VDDQ_CKEM1_2: 1200 mV
[    1.040000] BUCK6 1V35: 1350 mV
[    1.070000] BUCK7 2V0: 2000 mV
[    1.105000] BUCK8 3V0: 3000 mV
[    1.135000] BUCK9 1V2: 1200 mV
[    1.140000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[    1.140000] s3c-i2c s3c2440-i2c.1: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[    1.140000] s3c-i2c s3c2440-i2c.3: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[    1.140000] s3c-i2c s3c2440-i2c.7: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[    1.140000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[    1.140000] Linux video capture interface: v2.00
[    1.140000] Advanced Linux Sound Architecture Driver Initialized.
[    1.140000] cfg80211: Calling CRDA to update world regulatory domain
[    1.140000] Switching to clocksource mct-frc
[    1.150000] NET: Registered protocol family 2
[    1.150000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.150000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    1.150000] TCP: Hash tables configured (established 8192 bind 8192)
[    1.150000] TCP: reno registered
[    1.150000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    1.150000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    1.150000] NET: Registered protocol family 1
[    1.150000] Trying to unpack rootfs image as initramfs...
[    1.290000] Freeing initrd memory: 2720K
[    1.290000] CPU PMU: probing PMU on CPU 3
[    1.290000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    1.295000] bounce pool size: 64 pages
[    1.300000] msgmni has been set to 1489
[    1.305000] io scheduler noop registered
[    1.305000] io scheduler deadline registered
[    1.305000] io scheduler cfq registered (default)
[    1.310000] s3c-fb exynos4-fb.0: start latency exceeded, new value 625 ns
[    1.310000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 31541 ns
[    1.330000] Console: switching to colour frame buffer device 170x48
[    1.340000] s3c-fb exynos4-fb.0: window 0: fb
[    1.345000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[    1.345000] dma-pl330 dma-pl330.0:   DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.350000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[    1.350000] dma-pl330 dma-pl330.1:   DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.350000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[    1.350000] dma-pl330 dma-pl330.2:   DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.420000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.425000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[    1.425000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[    2.365000] console [ttySAC1] enabled
[    2.370000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[    2.380000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[    2.390000] [drm] Initialized drm 1.1.0 20060810
[    2.395000] Mali<2>: Inserting Mali v19 device driver.
[    2.400000] Mali<2>: Compiled: Jun 26 2013, time: 09:15:07.
[    2.405000] Mali<2>: Driver revision:
[    2.405000] Mali<2>: mali_module_init() registering driver
[    2.415000] Mali<2>: mali_probe(): Called for platform device mali-utgard
[    2.420000] Mali<2>: Memory system initializing
[    2.425000] Mali<2>: Using device defined memory settings (dedicated: 0x00000000@0x00000000, shared: 0x10000000)
[    2.435000] Mali<2>: Mali OS memory allocator created with max allocation size of 0x10000000 bytes, cpu_usage_adjust 0x00000000
[    2.445000] Mali<2>: Using device defined frame buffer settings (0x00000000@0x00000000)
[    2.455000] mali-utgard mali-utgard.0: start latency exceeded, new value 625 ns
[    2.460000] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3458 ns
[    2.470000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[    2.475000] Mali<2>: Mali PP: Base address of PP core: 0x13008000
[    2.480000] Mali<2>: Found Mali GPU Mali-400 MP r1p1
[    2.485000] Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali_L2
[    2.490000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
[    2.500000] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
[    2.505000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
[    2.510000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[    2.515000] Mali<2>: Mali PP: Base address of PP core: 0x13008000
[    2.520000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
[    2.525000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
[    2.535000] Mali<2>: Mali PP: Base address of PP core: 0x1300a000
[    2.540000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
[    2.545000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
[    2.550000] Mali<2>: Mali PP: Base address of PP core: 0x1300c000
[    2.555000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
[    2.560000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
[    2.570000] Mali<2>: Mali PP: Base address of PP core: 0x1300e000
[    2.575000] Mali<2>: 4+0 PP cores initialized
[    2.580000] Mali<2>: Mali GPU Utilization: No utilization handler installed
[    2.585000] Mali<2>: mali_probe(): Successfully initialized driver for platform device mali-utgard
[    2.595000] mali-utgard mali-utgard.0: stop latency exceeded, new value 958 ns
[    2.600000] mali-utgard mali-utgard.0: state save latency exceeded, new value 4416 ns
[    2.610000] Mali: Mali device driver loaded
[    2.615000] UMP: UMP device driver  loaded
[    2.625000] brd: module loaded
[    2.630000] loop: module loaded
[    2.635000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.640000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[    2.645000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    2.650000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[    2.665000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
[    2.665000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.670000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.680000] usb usb1: Product: S5P EHCI Host Controller
[    2.685000] usb usb1: Manufacturer: Linux 3.8.13.3-robroyhall-odroidx ehci_hcd
[    2.690000] usb usb1: SerialNumber: s5p-ehci
[    2.695000] hub 1-0:1.0: USB hub found
[    2.700000] hub 1-0:1.0: 3 ports detected
[    2.705000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.710000] exynos-ohci exynos-ohci: Already power on PHY
[    2.715000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[    2.720000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[    2.730000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[    2.790000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.795000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.805000] usb usb2: Product: EXYNOS OHCI Host Controller
[    2.810000] usb usb2: Manufacturer: Linux 3.8.13.3-robroyhall-odroidx ohci_hcd
[    2.815000] usb usb2: SerialNumber: exynos-ohci
[    2.820000] hub 2-0:1.0: USB hub found
[    2.825000] hub 2-0:1.0: 3 ports detected
[    2.935000] usb3503 0-0008: SP_ILOCK failed (-6)
[    2.935000] usb3503 0-0008: usb3503_probe: probed on  hub mode
[    2.940000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.945000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    2.950000] s5p-mfc s5p-mfc: decoder registered as /dev/video0
[    2.960000] s5p-mfc s5p-mfc: encoder registered as /dev/video1
[    2.965000] s5p-hdmiphy 8-0038: probe successful
[    2.970000] s5p-tv: Board is ODROID-X/X2/U2
[    2.970000] s5p-hdmi exynos4-hdmi: probe successful
[    2.975000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[    2.975000]
[    2.990000] s5p-mixer s5p-mixer: probe start
[    2.995000] s5p-mixer s5p-mixer: resources acquired
[    2.995000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[    3.005000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[    3.010000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video2
[    3.015000] fb1: registered frame buffer emulation for /dev/video2
[    3.020000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video3
[    3.030000] fb2: registered frame buffer emulation for /dev/video3
[    3.035000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video4
[    3.040000] fb3: registered frame buffer emulation for /dev/video4
[    3.050000] s5p-mixer s5p-mixer: probe successful
[    3.055000] s5p-g2d s5p-g2d.0: device registered as /dev/video5
[    3.060000] Exynos: Kernel Thermal management registered
[    3.065000] cpuidle: using governor ladder
[    3.070000] sdhci: Secure Digital Host Controller Interface driver
[    3.075000] sdhci: Copyright(c) Pierre Ossman
[    3.080000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (55000000 Hz)
[    3.085000] mmc0: no vqmmc regulator found
[    3.090000] mmc0: no vmmc regulator found
[    3.125000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[    3.130000] dw_mmc dw_mmc: Using internal DMA controller.
[    3.135000] mmc1: no vmmc regulator found
[    3.165000] DWMMC: Div 2 = 125
[    3.165000] dw_mmc dw_mmc: Version ID is 240a
[    3.165000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[    3.175000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    3.180000] usbcore: registered new interface driver usbhid
[    3.180000] usbhid: USB HID core driver
[    3.195000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[    3.210000] max98090 1-0010: revision 0x42
[    3.220000]  [MAX98090] max98090_set_record_main_mic(150)
[    3.225000] hkdk-snd-max89090 hkdk-snd-max89090:  max98090-aif1 <-> samsung-i2s.0 mapping ok
[    3.235000] hkdk-snd-max89090 hkdk-snd-max89090:  max98090-aif1 <-> samsung-i2s.0 mapping ok
[    3.240000] TCP: cubic registered
[    3.245000] NET: Registered protocol family 17
[    3.250000] NET: Registered protocol family 15
[    3.255000] NET: Registered protocol family 35
[    3.260000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.265000] ThumbEE CPU extension supported.
[    3.270000] Registering SWP/SWPB emulation handler
[    3.275000] BUCK4 vdd_g3d: incomplete constraints, leaving on
[    3.280000] LDO10 VDD18_MIPI_1V8: incomplete constraints, leaving on
[    3.285000] DRM: mali_platform_drm_probe()
[    3.290000] mali_drm_init(), driver name: mali_drm, version 0.1
[    3.295000] mmc1: BKOPS_EN bit is not set
[    3.295000] DWMMC: Div 1 = 1
[    3.295000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    3.295000] mmc1: new high speed DDR MMC card at address 0001
[    3.295000] mmcblk0: mmc1:0001 016G92 14.6 GiB
[    3.295000] mmcblk0boot0: mmc1:0001 016G92 partition 1 4.00 MiB
[    3.295000] mmcblk0boot1: mmc1:0001 016G92 partition 2 4.00 MiB
[    3.295000] mmcblk0rpmb: mmc1:0001 016G92 partition 3 512 KiB
[    3.300000]  mmcblk0: p1 p2
[    3.300000]  mmcblk0boot1: unknown partition table
[    3.300000]  mmcblk0boot0: unknown partition table
[    3.355000] DRM: mali_driver_load()
[    3.355000] [drm] Initialized mali_drm 0.1.0 20100520 on minor 0
[    3.365000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-07-11 03:38:02 UTC (1373513882)
[    3.375000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[    3.380000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.380000] exynos4_dvfs_hotplug_init, max(1800000),min(0)
[    3.380000] ALSA device list:
[    3.380000]   #0: Built-in Audio
[    3.395000] Freeing init memory: 164K
[    3.395000] hub 1-2:1.0: USB hub found
[    3.395000] hub 1-2:1.0: 3 ports detected
Loading, please wait...
[    3.445000] udevd[1313]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    3.630000] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[    3.680000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
[    3.785000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514
[    3.785000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.795000] hub 1-2.1:1.0: USB hub found
[    3.795000] hub 1-2.1:1.0: 5 ports detected
[    3.890000] usb 1-2.2: new full-speed USB device number 4 using s5p-ehci
[    3.985000] Unable to handle kernel paging request at virtual address b6f200d8
[    3.985000] pgd = c0004000
[    3.990000] [b6f200d8] *pgd=00000000
[    3.990000] Internal error: Oops: 8000000f [#1] PREEMPT SMP ARM
[    3.995000] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b
[    3.995000] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.995000] usb 1-2.2: Product: USB Receiver
[    3.995000] usb 1-2.2: Manufacturer: Logitech
[    4.020000] Modules linked in:
[    4.025000] CPU: 2    Not tainted  (3.8.13.3-robroyhall-odroidx #1)
[    4.030000] PC is at 0xb6f200d8
[    4.035000] LR is at rcu_eqs_exit_common.isra.39+0x3c/0xf0
[    4.040000] pc : [<b6f200d8>]    lr : [<c007ba34>]    psr: 200001d3
[    4.040000] sp : ed06ff10  ip : 008bc000  fp : 00000000
[    4.050000] r10: c05e7bd0  r9 : 413fc090  r8 : b6f206b8
[    4.055000] r7 : b6f200d8  r6 : b6f200d8  r5 : c007ca0c  r4 : 00000000
[    4.060000] r3 : 00000001  r2 : 00001c27  r1 : 00000000  r0 : 00000002
[    4.070000] Flags: nzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    4.075000] Control: 10c5387d  Table: 6c47804a  DAC: 00000015
[    4.080000] Process swapper/2 (pid: 0, stack limit = 0xed06e240)
[    4.085000] Stack: (0xed06ff10 to 0xed070000)
[    4.090000] usb 1-2.1.1: new high-speed USB device number 5 using s5p-ehci
[    4.100000] ff00:                                     c05c1344 c000f13c f881800c c05e4018
[    4.105000] ff20: ed06ff40 c0008530 c0057940 c02d918c 60000053 ffffffff ed06ff74 c000de40
[    4.115000] ff40: ed06ff88 3b9aca00 ed865081 00000000 ed6fd3d5 00000000 c0e7c3f0 00000000
[    4.125000] ff60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed06ff88 c0057940 c02d918c
[    4.130000] ff80: 60000053 ffffffff ed865081 00000000 00000000 00000000 ed06e000 c0e7c3f0
[    4.140000] ffa0: c065c6e8 00000000 00000000 c02d8ea4 ed06e000 c0e7c3f0 c065c6e8 c02d8f7c
[    4.150000] ffc0: ed06e000 ed06e000 c06245c8 c042236c ed06e000 c000f51c c0415090 6d04c06a
[    4.155000] ffe0: 00000015 10c0387d c062489c 4000406a 00000000 404150a8 c0c0c0c0 c0c0c0c0
[    4.165000] [<c007ba34>] (rcu_eqs_exit_common.isra.39+0x3c/0xf0) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[    4.175000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<00000000>] (  (null))
[    4.180000] Code: b6f206b8 b6f20288 00000020 00000039 (b6f1fe98)
[    4.190000] ---[ end trace 903c855ee7a8f046 ]---
[    4.195000] Kernel panic - not syncing: Attempted to kill the idle task!
[    4.195000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00
[    4.195000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.215000] CPU3: stopping
[    4.215000] [<c0014e08>] (unwind_backtrace+0x0/0xf8) from [<c0013474>] (handle_IPI+0x120/0x14c)
[    4.215000] [<c0013474>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
[    4.215000] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[    4.215000] Exception stack(0xed071f40 to 0xed071f88)
[    4.215000] 1f40: ed071f88 3b9aca00 fb521a5d 00000000 fb3bfce8 00000000 c0e843f0 00000000
[    4.215000] 1f60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed071f88 c0057940 c02d918c
[    4.215000] 1f80: 60000053 ffffffff
[    4.215000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[    4.215000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[    4.215000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[    4.215000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[    4.215000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<404150a8>] (0x404150a8)
[    4.215000] CPU0: stopping
[    4.215000] [<c0014e08>] (unwind_backtrace+0x0/0xf8) from [<c0013474>] (handle_IPI+0x120/0x14c)
[    4.215000] [<c0013474>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
[    4.215000] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[    4.215000] Exception stack(0xc05c3f10 to 0xc05c3f58)
[    4.215000] 3f00:                                     c05c3f58 3b9aca00 fb521b2d 00000000
[    4.215000] 3f20: fb3c03be 00000000 c0e6c3f0 00000000 c05ed100 413fc090 c05e7bd0 00000000
[    4.215000] 3f40: 00000018 c05c3f58 c0057940 c02d918c 60000053 ffffffff
[    4.215000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[    4.215000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[    4.215000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[    4.215000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[    4.215000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<c0598848>] (start_kernel+0x330/0x384)
[    4.215000] CPU1: stopping
[    4.215000] [<c0014e08>] (unwind_backtrace+0x0/0xf8) from [<c0013474>] (handle_IPI+0x120/0x14c)
[    4.215000] [<c0013474>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
[    4.215000] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[    4.215000] Exception stack(0xed06df40 to 0xed06df88)
[    4.215000] df40: ed06df88 3b9aca00 fb521bd4 00000000 fb3bfdb8 00000000 c0e743f0 00000000
[    4.215000] df60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed06df88 c0057940 c02d918c
[    4.215000] df80: 60000153 ffffffff
[    4.215000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[    4.215000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[    4.215000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[    4.215000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[    4.215000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<404150a8>] (0x404150a8)

Yes, it is, but you will need the USB-UART adapter to use the alternate method (or very fast fingers): http://fw.hardijzer.nl/?p=200

I’ll try this alternate method once the Odroid-X boots properly from SD and will provide feedback.
Thanks Again,
Kiril
profitvess
 
Posts: 6
Joined: Fri Mar 01, 2013 11:22 pm
languages_spoken: english
ODROIDs: ODROID-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby robroy » Thu Jul 11, 2013 3:32 pm

@mdrjr let me know that the kernel version that I used has a bug that prevents booting on the -X. I will be updating the image in the next week. Sorry for the false start ;)
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby profitvess » Fri Jul 12, 2013 5:19 pm

Hi robroyhall,
Unfortunately DreamMachine doesn’t boot from SD either :(
Here is the boot log:
Code: Select all
 
U-Boot 2010.12-svn (Dec 21 2012 - 19:44:04) for Exynox4412


CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1000MHz, MPLL = 880MHz
DRAM:  2047 MiB

PMIC VERSION : 0x00, CHIP REV : 2
TrustZone Enabled BSP
BL1 version: 20121128


Checking Boot Mode ... SDMMC
MMC Device 0: 7695 MB
MMC Device 1 not found
ModeKey Check... run normal_boot
Net:   No ethernet found.
Hit any key to stop autoboot:  0
>>> Load Boot Script from mmc 0:1 <<<
Partition1: Start Address(0x1000), Size(0x40000)
reading boot.scr
Warning : Reads a file that is smaller than the cluster size.

485 bytes read
## Executing script at 40008000
Partition1: Start Address(0x1000), Size(0x40000)
reading zImage

2313808 bytes read
Partition1: Start Address(0x1000), Size(0x40000)
reading uInitrd

2788215 bytes read
Boot with zImage
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    2788151 Bytes = 2722 KiB
   Load Address: 00000000
   Entry Point:  00000000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0xa00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.8.13.3-robroyhall-odroidx (root@odroid) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #1 SMP PREEMPT Wed Jun 26 09:41:15 PDT 2013 ()
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ODROIDX
[    0.000000] cma: CMA: reserved 8 MiB at 43000000
[    0.000000] cma: CMA: reserved 8 MiB at 51000000
[    0.000000] cma: CMA: reserved 32 MiB at 6d800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] CPU EXYNOS4412 (id 0xe4412211)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] s3c_register_clksrc: clock armclk has no registers set
[    0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[    0.000000] audiocdclk: no parent clock specified
[    0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
[    0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
[    0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[    0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
[    0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
[    0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
[    0.000000] Running under secure firmware.
[    0.000000] PERCPU: Embedded 7 pages/cpu @c0e6c000 s7936 r8192 d12544 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259842
[    0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=1023M console=tty1 console=ttySAC1,115200n8 hdtv_type=hdmi hdtv_format=1080p60hz root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=1023M
[    0.000000] s5p-tv: HDTV TYPE is hdmi
[    0.000000] s5p-tv: HDTV FORMAT is 1080p60hz
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 1023MB = 1023MB total
[    0.000000] Memory: 979848k/1959696k available, 135408k reserved, 269312K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05971d4   (5693 kB)
[    0.000000]       .init : 0xc0598000 - 0xc05c1f00   ( 168 kB)
[    0.000000]       .data : 0xc05c2000 - 0xc0624500   ( 394 kB)
[    0.000000]        .bss : 0xc0624500 - 0xc065f6d0   ( 237 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:549
[    0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[    0.045000] pid_max: default: 32768 minimum: 301
[    0.045000] Mount-cache hash table entries: 512
[    0.045000] Initializing cgroup subsys cpuacct
[    0.045000] Initializing cgroup subsys devices
[    0.045000] CPU: Testing write buffer coherency: ok
[    0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[    0.045000] Setting up static identity map for 0x4041f930 - 0x4041f988
[    0.045000] L310 cache controller enabled
[    0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[    0.075000] CPU1: Booted secondary processor
[    0.095000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[    0.105000] CPU2: Booted secondary processor
[    0.125000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[    0.135000] CPU3: Booted secondary processor
[    0.155000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[    0.155000] Brought up 4 CPUs
[    0.155000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[    0.155000] devtmpfs: initialized
[    0.160000] regulator-dummy: no parameters
[    0.160000] NET: Registered protocol family 16
[    0.170000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.180000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.180000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.180000] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.180000] EXYNOS4x12 PMU Initialize
[    0.180000] EXYNOS: Initializing architecture
[    0.180000] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
[    0.195000] bio: create slab <bio-0> at 0
[    0.195000] hdmi_5v: 5000 mV
[    0.195000] usbcore: registered new interface driver usbfs
[    0.195000] usbcore: registered new interface driver hub
[    0.195000] usbcore: registered new device driver usb
[    0.195000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[    0.195000] s3c-i2c s3c2440-i2c.0: bus frequency set to 71 KHz
[    0.200000] max77686 0-0009: device found
[    0.200000] max77686 0-0009: irq is not specified
[    0.225000] LDO1 VDD_ALIVE: 1000 mV
[    0.255000] LDO2 VDDQ_M1_1V8: 1200 mV
[    0.285000] LDO3 VDDQ_AUD_1V8: 1800 mV
[    0.315000] LDO4 VDDQ_MMC2_2V8: 2800 mV
[    0.345000] LDO5 VDDQ_MMC1_1V8: 1800 mV
[    0.380000] LDO6 VDD10_MPLL_1V0: 1000 mV
[    0.415000] LDO7 VDD10_EPLL_1V0: 1000 mV
[    0.445000] LDO8 VDD10_MIPI_1V0: 1000 mV
[    0.480000] LDO9 VT_CORE_1V0: 1000 mV
[    0.500000] LDO10 VDD18_MIPI_1V8: 1800 mV
[    0.530000] LDO11 VDD18_ABB1_1V8: 1800 mV
[    0.550000] vdd_ldo12 range: 3300 mV
[    0.580000] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
[    0.610000] LDO14 VDD18_ADC_1V8: 1800 mV
[    0.630000] vdd_ldo15 range: 1000 mV
[    0.660000] LDO16 VDD18_HSIC: 1800 mV
[    0.695000] LDO17 VDDQ_CAM_1V8: 1800 mV
[    0.725000] LDO18 VDDQ_ISP_1V8: 1800 mV
[    0.730000] LDO19 VT_CAM_1V8: 1800 mV
[    0.745000] LDO20 EMMC_IO_1V8: 1800 mV
[    0.775000] LDO21 TFLASH_2V8: 2800 mV
[    0.795000] LDO22 2V8: 2800 mV
[    0.830000] LDO23 VDD_TOUCH_2V8: 2800 mV
[    0.865000] LDO24 VDD_TOUCHLED_3V3: 3300 mV
[    0.900000] LDO25 VDDQ_LCD_3V0: 1800 mV
[    0.930000] LDO26 VDD_MOTOR_3V0: 3000 mV
[    0.940000] BUCK1 vdd_mif: 1100 mV
[    0.955000] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
[    0.965000] BUCK3 vdd_int: 1125 mV
[    0.980000] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
[    1.010000] BUCK5 VDDQ_CKEM1_2: 1200 mV
[    1.040000] BUCK6 1V35: 1350 mV
[    1.070000] BUCK7 2V0: 2000 mV
[    1.105000] BUCK8 3V0: 3000 mV
[    1.135000] BUCK9 1V2: 1200 mV
[    1.140000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[    1.140000] s3c-i2c s3c2440-i2c.1: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[    1.140000] s3c-i2c s3c2440-i2c.3: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[    1.140000] s3c-i2c s3c2440-i2c.7: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[    1.140000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[    1.140000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 71 KHz
[    1.140000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[    1.140000] Linux video capture interface: v2.00
[    1.140000] Advanced Linux Sound Architecture Driver Initialized.
[    1.140000] cfg80211: Calling CRDA to update world regulatory domain
[    1.140000] Switching to clocksource mct-frc
[    1.150000] NET: Registered protocol family 2
[    1.150000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.150000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    1.150000] TCP: Hash tables configured (established 8192 bind 8192)
[    1.150000] TCP: reno registered
[    1.150000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    1.150000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    1.150000] NET: Registered protocol family 1
[    1.150000] Trying to unpack rootfs image as initramfs...
[    1.290000] Freeing initrd memory: 2720K
[    1.290000] CPU PMU: probing PMU on CPU 1
[    1.290000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    1.295000] bounce pool size: 64 pages
[    1.300000] msgmni has been set to 1489
[    1.305000] io scheduler noop registered
[    1.305000] io scheduler deadline registered
[    1.305000] io scheduler cfq registered (default)
[    1.310000] s3c-fb exynos4-fb.0: start latency exceeded, new value 583 ns
[    1.310000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 31209 ns
[    1.330000] Console: switching to colour frame buffer device 170x48
[    1.340000] s3c-fb exynos4-fb.0: window 0: fb
[    1.345000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[    1.345000] dma-pl330 dma-pl330.0:   DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.350000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[    1.350000] dma-pl330 dma-pl330.1:   DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.350000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[    1.350000] dma-pl330 dma-pl330.2:   DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.425000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.425000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[    1.425000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[    2.370000] console [ttySAC1] enabled
[    2.370000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[    2.380000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[    2.390000] [drm] Initialized drm 1.1.0 20060810
[    2.395000] Mali<2>: Inserting Mali v19 device driver.
[    2.400000] Mali<2>: Compiled: Jun 26 2013, time: 09:15:07.
[    2.405000] Mali<2>: Driver revision:
[    2.410000] Mali<2>: mali_module_init() registering driver
[    2.415000] Mali<2>: mali_probe(): Called for platform device mali-utgard
[    2.420000] Mali<2>: Memory system initializing
[    2.425000] Mali<2>: Using device defined memory settings (dedicated: 0x00000000@0x00000000, shared: 0x10000000)
[    2.435000] Mali<2>: Mali OS memory allocator created with max allocation size of 0x10000000 bytes, cpu_usage_adjust 0x00000000
[    2.450000] Mali<2>: Using device defined frame buffer settings (0x00000000@0x00000000)
[    2.455000] mali-utgard mali-utgard.0: start latency exceeded, new value 542 ns
[    2.465000] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3125 ns
[    2.470000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[    2.475000] Mali<2>: Mali PP: Base address of PP core: 0x13008000
[    2.485000] Mali<2>: Found Mali GPU Mali-400 MP r1p1
[    2.490000] Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali_L2
[    2.495000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
[    2.500000] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
[    2.505000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
[    2.510000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[    2.515000] Mali<2>: Mali PP: Base address of PP core: 0x13008000
[    2.525000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
[    2.530000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
[    2.535000] Mali<2>: Mali PP: Base address of PP core: 0x1300a000
[    2.540000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
[    2.545000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
[    2.550000] Mali<2>: Mali PP: Base address of PP core: 0x1300c000
[    2.560000] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
[    2.565000] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
[    2.570000] Mali<2>: Mali PP: Base address of PP core: 0x1300e000
[    2.575000] Mali<2>: 4+0 PP cores initialized
[    2.580000] Mali<2>: Mali GPU Utilization: No utilization handler installed
[    2.585000] Mali<2>: mali_probe(): Successfully initialized driver for platform device mali-utgard
[    2.595000] mali-utgard mali-utgard.0: stop latency exceeded, new value 542 ns
[    2.605000] mali-utgard mali-utgard.0: state save latency exceeded, new value 4041 ns
[    2.610000] Mali: Mali device driver loaded
[    2.615000] UMP: UMP device driver  loaded
[    2.625000] brd: module loaded
[    2.635000] loop: module loaded
[    2.635000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.640000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[    2.645000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    2.655000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[    2.670000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
[    2.670000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.675000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.685000] usb usb1: Product: S5P EHCI Host Controller
[    2.690000] usb usb1: Manufacturer: Linux 3.8.13.3-robroyhall-odroidx ehci_hcd
[    2.695000] usb usb1: SerialNumber: s5p-ehci
[    2.700000] hub 1-0:1.0: USB hub found
[    2.705000] hub 1-0:1.0: 3 ports detected
[    2.710000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.715000] exynos-ohci exynos-ohci: Already power on PHY
[    2.720000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[    2.725000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[    2.735000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[    2.795000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.800000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.810000] usb usb2: Product: EXYNOS OHCI Host Controller
[    2.815000] usb usb2: Manufacturer: Linux 3.8.13.3-robroyhall-odroidx ohci_hcd
[    2.820000] usb usb2: SerialNumber: exynos-ohci
[    2.825000] hub 2-0:1.0: USB hub found
[    2.830000] hub 2-0:1.0: 3 ports detected
[    2.940000] usb3503 0-0008: SP_ILOCK failed (-6)
[    2.940000] usb3503 0-0008: usb3503_probe: probed on  hub mode
[    2.945000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.950000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    2.955000] s5p-mfc s5p-mfc: decoder registered as /dev/video0
[    2.965000] s5p-mfc s5p-mfc: encoder registered as /dev/video1
[    2.970000] s5p-hdmiphy 8-0038: probe successful
[    2.975000] s5p-tv: Board is ODROID-X/X2/U2
[    2.975000] s5p-hdmi exynos4-hdmi: probe successful
[    2.980000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[    2.980000]
[    2.995000] s5p-mixer s5p-mixer: probe start
[    2.995000] s5p-mixer s5p-mixer: resources acquired
[    3.000000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[    3.010000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[    3.015000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video2
[    3.020000] fb1: registered frame buffer emulation for /dev/video2
[    3.025000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video3
[    3.035000] fb2: registered frame buffer emulation for /dev/video3
[    3.040000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video4
[    3.045000] fb3: registered frame buffer emulation for /dev/video4
[    3.055000] s5p-mixer s5p-mixer: probe successful
[    3.060000] s5p-g2d s5p-g2d.0: device registered as /dev/video5
[    3.065000] Exynos: Kernel Thermal management registered
[    3.070000] cpuidle: using governor ladder
[    3.075000] sdhci: Secure Digital Host Controller Interface driver
[    3.080000] sdhci: Copyright(c) Pierre Ossman
[    3.085000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (55000000 Hz)
[    3.090000] mmc0: no vqmmc regulator found
[    3.095000] mmc0: no vmmc regulator found
[    3.130000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[    3.135000] dw_mmc dw_mmc: Using internal DMA controller.
[    3.140000] mmc1: no vmmc regulator found
[    3.160000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[    3.165000] mmc0: new high speed SDHC card at address b368
[    3.170000] mmcblk0: mmc0:b368 00000 7.51 GiB
[    3.175000] dw_mmc dw_mmc: Version ID is 240a
[    3.175000]  mmcblk0: p1 p2
[    3.175000] DWMMC: Div 2 = 125
[    3.175000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
[    3.190000] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[    3.200000] usbcore: registered new interface driver usbhid
[    3.205000] usbhid: USB HID core driver
[    3.240000] max98090 1-0010: revision 0x42
[    3.255000]  [MAX98090] max98090_set_record_main_mic(150)
[    3.260000] hkdk-snd-max89090 hkdk-snd-max89090:  max98090-aif1 <-> samsung-i2s.0 mapping ok
[    3.265000] hkdk-snd-max89090 hkdk-snd-max89090:  max98090-aif1 <-> samsung-i2s.0 mapping ok
[    3.275000] mmc1: BKOPS_EN bit is not set
[    3.275000] TCP: cubic registered
[    3.275000] NET: Registered protocol family 17
[    3.275000] NET: Registered protocol family 15
[    3.275000] NET: Registered protocol family 35
[    3.295000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.300000] ThumbEE CPU extension supported.
[    3.305000] Registering SWP/SWPB emulation handler
[    3.310000] DWMMC: Div 1 = 1
[    3.315000] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    3.325000] BUCK4 vdd_g3d: incomplete constraints, leaving on
[    3.330000] mmc1: new high speed DDR MMC card at address 0001
[    3.335000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[    3.335000] mmcblk1: mmc1:0001 016G92 14.6 GiB
[    3.335000] mmcblk1boot0: mmc1:0001 016G92 partition 1 4.00 MiB
[    3.335000] mmcblk1boot1: mmc1:0001 016G92 partition 2 4.00 MiB
[    3.335000] mmcblk1rpmb: mmc1:0001 016G92 partition 3 512 KiB
[    3.335000] LDO10 VDD18_MIPI_1V8: incomplete constraints, leaving on
[    3.335000]  mmcblk1: p1 p2
[    3.335000] DRM: mali_platform_drm_probe()
[    3.335000] mali_drm_init(), driver name: mali_drm, version 0.1
[    3.335000] DRM: mali_driver_load()
[    3.335000] [drm] Initialized mali_drm 0.1.0 20100520 on minor 0
[    3.340000]  mmcblk1boot1: unknown partition table
[    3.340000]  mmcblk1boot0: unknown partition table
[    3.400000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-07-11 04:07:38 UTC (1373515658)
[    3.400000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.400000] hub 1-2:1.0: USB hub found
[    3.400000] hub 1-2:1.0: 3 ports detected
[    3.425000] exynos4_dvfs_hotplug_init, max(1800000),min(0)
[    3.430000] ALSA device list:
[    3.430000]   #0: Built-in Audio
[    3.435000] Freeing init memory: 164K
Loading, please wait...
[    3.480000] udevd[1319]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    3.680000] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
Begin: Running /scripts/local-bottom ... [    3.690000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
done.
done.
Begin: Running /scripts/init-bottom ... [    3.800000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514
[    3.800000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.810000] hub 1-2.1:1.0: USB hub found
[    3.810000] hub 1-2.1:1.0: 5 ports detected
[    3.905000] usb 1-2.3: new full-speed USB device number 4 using s5p-ehci
done.
[    4.010000] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c52b
[    4.015000] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.020000] usb 1-2.3: Product: USB Receiver
[    4.025000] usb 1-2.3: Manufacturer: Logitech
[    4.120000] usb 1-2.1.1: new high-speed USB device number 5 using s5p-ehci
[    4.225000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00
[    4.225000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.420000] init: ureadahead main process (1465) terminated with status 5
mountall: Plymouth command failed
mountall: Disconnected from Plymouth
[    6.145000] s5p_mfc_alloc_and_load_firmware:44: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    6.185000] s5p_mfc_alloc_and_load_firmware:44: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[   13.205000] Unable to handle kernel paging request at virtual address 008bc00c
[   13.205000] pgd = c0004000
[   13.210000] [008bc00c] *pgd=00000000
[   13.215000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[   13.220000] Modules linked in: mousedev smsc95xx usbnet hid_logitech_dj gpio_keys
[   13.225000] CPU: 2    Not tainted  (3.8.13.3-robroyhall-odroidx #1)
[   13.230000] PC is at rcu_check_callbacks+0xc8/0x88c
[   13.235000] LR is at rcu_is_cpu_rrupt_from_idle+0x8/0x38
[   13.240000] pc : [<c007d3e4>]    lr : [<c007cb88>]    psr: 600001d3
[   13.240000] sp : ed06fdb8  ip : 00000002  fp : c05e4658
[   13.255000] r10: c0648298  r9 : 00000000  r8 : 00000000
[   13.260000] r7 : 008bc000  r6 : c05e48c8  r5 : c05fe280  r4 : 008bc000
[   13.265000] r3 : 000006e2  r2 : 00000045  r1 : 00000045  r0 : 00000045
[   13.270000] Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[   13.280000] Control: 10c5387d  Table: 6c48c04a  DAC: 00000015
[   13.285000] Process swapper/2 (pid: 0, stack limit = 0xed06e240)
[   13.290000] Stack: (0xed06fdb8 to 0xed070000)
[   13.295000] fda0:                                                       c004da44 c0e7d810
[   13.305000] fdc0: ed065000 00000000 c05fe4c0 00000002 ed06e000 c05fe714 ed06fe0c c004a650
[   13.310000] fde0: 000014a2 c05edf40 ed065000 ed065000 00000000 ed06e000 00000002 ed06ff40
[   13.320000] fe00: c0e7cc48 c0648298 00000000 c003035c 60000053 13146d60 00000003 c0e7cac0
[   13.330000] fe20: c005e89c c005e8f4 c001ec68 00000003 0000e9f6 c0e7cc48 c0e7cb0c 00000002
[   13.335000] fe40: 13146d60 00000003 00000002 c0e7cc48 c0e7cb00 c0e7cac0 c005e89c 00000003
[   13.345000] fe60: c0e7cac0 00000000 00000000 c0042f2c 00000003 13146661 00000003 c0e7cb00
[   13.350000] fe80: 00000000 c004361c 13146661 00000003 ed06fea4 00000001 ffffffff 7fffffff
[   13.360000] fea0: ffffffff 7fffffff c0e7cb68 c0e7cba0 13146661 00000003 13146661 00000003
[   13.370000] fec0: 00000102 c0e7c240 c0e7c570 ed002f40 c0e7c570 0000001c 413fc090 c05e7bd0
[   13.375000] fee0: 00000000 c001ece8 c001ec9c c05c56c0 c05e8dc0 c0078314 c05c1344 0000001c
[   13.385000] ff00: 00000000 f8818000 c05ed100 c0074c9c 00000225 c000f154 f881800c c05e4018
[   13.395000] ff20: ed06ff40 c0008530 c0057940 c02d918c 60000053 ffffffff ed06ff74 c000de40
[   13.400000] ff40: ed06ff88 3b9aca00 131457bb 00000003 12d6da31 00000003 c0e7c3f0 00000000
[   13.410000] ff60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed06ff88 c0057940 c02d918c
[   13.415000] ff80: 60000053 ffffffff 131457bb 00000003 c05c0d20 c007bb1c c05ed100 c0e7c3f0
[   13.425000] ffa0: c065c6e8 00000000 00000000 c02d8ea4 ed06e000 c0e7c3f0 c065c6e8 c02d8f7c
[   13.435000] ffc0: ed06e000 ed06e000 c06245c8 c042236c ed06e000 c000f51c c0415090 6d04c06a
[   13.440000] ffe0: 00000015 10c0387d c062489c 4000406a 00000000 404150a8 c0c0c0c0 c0c0c0c0
[   13.450000] [<c007d3e4>] (rcu_check_callbacks+0xc8/0x88c) from [<c003035c>] (update_process_times+0x3c/0x6c)
[   13.460000] [<c003035c>] (update_process_times+0x3c/0x6c) from [<c005e8f4>] (tick_sched_timer+0x58/0x1ac)
[   13.470000] [<c005e8f4>] (tick_sched_timer+0x58/0x1ac) from [<c0042f2c>] (__run_hrtimer.isra.20+0x44/0xd0)
[   13.480000] [<c0042f2c>] (__run_hrtimer.isra.20+0x44/0xd0) from [<c004361c>] (hrtimer_interrupt+0xfc/0x298)
[   13.490000] [<c004361c>] (hrtimer_interrupt+0xfc/0x298) from [<c001ece8>] (exynos4_mct_tick_isr+0x4c/0x54)
[   13.500000] [<c001ece8>] (exynos4_mct_tick_isr+0x4c/0x54) from [<c0078314>] (handle_percpu_devid_irq+0x68/0x84)
[   13.510000] [<c0078314>] (handle_percpu_devid_irq+0x68/0x84) from [<c0074c9c>] (generic_handle_irq+0x24/0x38)
[   13.520000] [<c0074c9c>] (generic_handle_irq+0x24/0x38) from [<c000f154>] (handle_IRQ+0x38/0x94)
[   13.525000] [<c000f154>] (handle_IRQ+0x38/0x94) from [<c0008530>] (gic_handle_irq+0x34/0x68)
[   13.535000] [<c0008530>] (gic_handle_irq+0x34/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[   13.545000] Exception stack(0xed06ff40 to 0xed06ff88)
[   13.550000] ff40: ed06ff88 3b9aca00 131457bb 00000003 12d6da31 00000003 c0e7c3f0 00000000
[   13.555000] ff60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed06ff88 c0057940 c02d918c
[   13.565000] ff80: 60000053 ffffffff
[   13.570000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[   13.580000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[   13.585000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[   13.595000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[   13.605000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<404150a8>] (0x404150a8)
[   13.610000] Code: e796710c e59b8000 e0894007 e3580000 (e594c00c)
[   13.620000] ---[ end trace 170568a478ac47e1 ]---
[   13.625000] Kernel panic - not syncing: Fatal exception in interrupt
[   13.630000] CPU0: stopping
[   13.630000] [<c0014e08>] (unwind_backtrace+0x0/0xf8) from [<c0013474>] (handle_IPI+0x120/0x14c)
[   13.630000] [<c0013474>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
[   13.630000] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[   13.630000] Exception stack(0xc05c3f10 to 0xc05c3f58)
[   13.630000] 3f00:                                     c05c3f58 3b9aca00 2c828d80 00000003
[   13.630000] 3f20: 2c78e5d2 00000003 c0e6c3f0 00000000 c05ed100 413fc090 c05e7bd0 00000000
[   13.630000] 3f40: 00000018 c05c3f58 c0057940 c02d918c 60000053 ffffffff
[   13.630000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[   13.630000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[   13.630000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[   13.630000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[   13.630000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<c0598848>] (start_kernel+0x330/0x384)
[   13.630000] CPU3: stopping
[   13.630000] [<c0014e08>] (unwind_backtrace+0x0/0xf8) from [<c0013474>] (handle_IPI+0x120/0x14c)
[   13.630000] [<c0013474>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
[   13.630000] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[   13.630000] Exception stack(0xed071f40 to 0xed071f88)
[   13.630000] 1f40: ed071f88 3b9aca00 2c828daa 00000003 2c69820b 00000003 c0e843f0 00000000
[   13.630000] 1f60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed071f88 c0057940 c02d918c
[   13.630000] 1f80: 60000053 ffffffff
[   13.630000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[   13.630000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[   13.630000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[   13.630000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[   13.630000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<404150a8>] (0x404150a8)
[   13.630000] CPU1: stopping
[   13.630000] [<c0014e08>] (unwind_backtrace+0x0/0xf8) from [<c0013474>] (handle_IPI+0x120/0x14c)
[   13.630000] [<c0013474>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
[   13.630000] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
[   13.630000] Exception stack(0xed06df40 to 0xed06df88)
[   13.630000] df40: ed06df88 3b9aca00 2c828e7a 00000003 2c697ab8 00000003 c0e743f0 00000000
[   13.630000] df60: c05ed100 413fc090 c05e7bd0 00000000 00000018 ed06df88 c0057940 c02d918c
[   13.630000] df80: 60000053 ffffffff
[   13.630000] [<c000de40>] (__irq_svc+0x40/0x70) from [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98)
[   13.630000] [<c02d918c>] (cpuidle_wrap_enter+0x48/0x98) from [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60)
[   13.630000] [<c02d8ea4>] (cpuidle_enter_state+0x14/0x60) from [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8)
[   13.630000] [<c02d8f7c>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f51c>] (cpu_idle+0x90/0xec)
[   13.630000] [<c000f51c>] (cpu_idle+0x90/0xec) from [<404150a8>] (0x404150a8)


I wonder if I’m the only one who tried the DreamMachine image on an Odroid-X :?:
profitvess
 
Posts: 6
Joined: Fri Mar 01, 2013 11:22 pm
languages_spoken: english
ODROIDs: ODROID-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby mdrjr » Fri Jul 12, 2013 9:57 pm

prof,

He'll fix the image, its a kernel bug that I fixed! He'll replace the kernel and it will work :)
mdrjr
Site Admin
 
Posts: 11695
Joined: Fri Feb 22, 2013 11:34 pm
Location: Brazil
languages_spoken: english, portuguese
ODROIDs: -

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby profitvess » Fri Jul 12, 2013 11:46 pm

Thanks guys, I really appreciate it!
profitvess
 
Posts: 6
Joined: Fri Mar 01, 2013 11:22 pm
languages_spoken: english
ODROIDs: ODROID-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130628)

Unread postby robroy » Sat Jul 13, 2013 4:28 pm

profitvess wrote:Thanks guys, I really appreciate it!

I've put a Beta version on the server for your evaluation. It contains kernel 3.8.13.4 which should include the fix to which @mdrjr referred.

Please see the first post in this thread for the new link, and let me know if this works on your -X.

I'm able to boot it on my -X2 and the "free" command shows 1MB.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby profitvess » Tue Jul 16, 2013 6:07 pm

Hi robroyhall,
Yesterday I managed to write the new Beta version to my Odroid-X using:

sudo xzcat /Ubuntu-13.04_DreamMachine-X-HDMI.20130715.img.xz | sudo dd of=/dev/mmcblk0 bs=4M
sync

It boots correctly from EMMC so I can say that the issue is fixed now.
Thanks for the effort!
profitvess
 
Posts: 6
Joined: Fri Mar 01, 2013 11:22 pm
languages_spoken: english
ODROIDs: ODROID-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby sos » Tue Jul 23, 2013 3:33 am

profitvess wrote:It boots correctly from EMMC

But it not boot from SD-card
I get a errormessage like "Firmware is not present in the /lib/firmware nor compiled in Kernel"
after this i get

"plymounthd: ply-terminal.c 611: ply_terminal_open: Assertion 'terminal != (void *)0)' failed"
User avatar
sos
 
Posts: 53
Joined: Fri May 24, 2013 7:46 am
languages_spoken: german
ODROIDs: X,U2,U3

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby robroy » Tue Jul 23, 2013 6:09 am

sos wrote:But it not boot from SD-card
I get a errormessage like "Firmware is not present in the /lib/firmware nor compiled in Kernel"
after this i get

"plymounthd: ply-terminal.c 611: ply_terminal_open: Assertion 'terminal != (void *)0)' failed"

You posted that you're getting the same error message using Linaro Server 13.05, so I think it may not be related to a specific image.

You will get a more accurate answer if you move to the "Issues" forum.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby sos » Tue Jul 23, 2013 6:30 am

[quote="robroyhall" I think it may not be related to a specific image.
[/quote]
ok,but i think is the 3.8 kernel.
Code: Select all
"plymounthd: ply-terminal.c 611: ply_terminal_open: Assertion 'terminal != (void *)0)' failed"

this message is only from Dream Machine
User avatar
sos
 
Posts: 53
Joined: Fri May 24, 2013 7:46 am
languages_spoken: german
ODROIDs: X,U2,U3

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby robroy » Tue Jul 23, 2013 7:07 am

sos wrote:
robroyhall wrote: I think it may not be related to a specific image.

ok,but i think is the 3.8 kernel.
Code: Select all
"plymounthd: ply-terminal.c 611: ply_terminal_open: Assertion 'terminal != (void *)0)' failed"

this message is only from Dream Machine

Your problem may then be kernel-related. The image is identical to the one used for X2 and U2, which are known to be stable.

Until recently, the 3.8 kernel for Odroid-X had a bug that prevented booting, but it was fixed in the release that you're using.

There is a Kernel 3.8 thread already open: viewtopic.php?f=54&t=1516
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby sos » Wed Jul 24, 2013 3:03 pm

robroyhall wrote:Until recently, the 3.8 kernel for Odroid-X had a bug that prevented booting, but it was fixed in the release that you're using.

ok,i make a new test.
i plugged in a hdmi-cable and its works :!:
Can you make an image for LCD ?
thanks
User avatar
sos
 
Posts: 53
Joined: Fri May 24, 2013 7:46 am
languages_spoken: german
ODROIDs: X,U2,U3

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby robroy » Wed Jul 24, 2013 3:57 pm

sos wrote:
robroyhall wrote:Until recently, the 3.8 kernel for Odroid-X had a bug that prevented booting, but it was fixed in the release that you're using.

ok,i make a new test.
i plugged in a hdmi-cable and its works :!:

Excellent!!! :D
Can you make an image for LCD ?
thanks

I don't have the LCD, unfortunately.

I believe that you need to modify the xorg.conf and maybe the boot.scr file to use the LCD.

If an HK dev doesn't respond to this post, create a new thread about switching your video output from HDMI to LCD and you will get a more accurate answer. I'm sure it is very simple to do.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby mdrjr » Wed Jul 24, 2013 9:03 pm

Hi.. modify /etc/X11/xorg.conf

and change /dev/fbX to /dev/fb0 to use the LCD kit.
This information matchs kernel 3.0 and 3.8
mdrjr
Site Admin
 
Posts: 11695
Joined: Fri Feb 22, 2013 11:34 pm
Location: Brazil
languages_spoken: english, portuguese
ODROIDs: -

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby sos » Thu Jul 25, 2013 12:38 am

mdrjr wrote:Hi.. modify /etc/X11/xorg.conf

and change /dev/fbX to /dev/fb0 to use the LCD kit.

wow,it works :lol:
after the 3 errormessages 2x no Firmware ....
and
"plymounthd: ply-terminal.c 611: ply_terminal_open: Assertion 'terminal != (void *)0)' failed"
User avatar
sos
 
Posts: 53
Joined: Fri May 24, 2013 7:46 am
languages_spoken: german
ODROIDs: X,U2,U3

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby robroy » Thu Jul 25, 2013 1:00 am

sos wrote:
mdrjr wrote:Hi.. modify /etc/X11/xorg.conf

and change /dev/fbX to /dev/fb0 to use the LCD kit.

wow,it works :lol:

@mdrjr's posts are like zen koans of wisdom. Few words, much meaning :ugeek: :D
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130715)

Unread postby mdrjr » Thu Jul 25, 2013 3:00 am

plymonth isn't working on ARM not sure why. Canonical said something about it but I've forgot where I got this.

2 firmware errors is the MFC blob that isn't loaded. Ignore it.. won't do anything, since we aren't using the MFC on Linux yet :)
mdrjr
Site Admin
 
Posts: 11695
Joined: Fri Feb 22, 2013 11:34 pm
Location: Brazil
languages_spoken: english, portuguese
ODROIDs: -

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby robroy » Mon Jul 29, 2013 8:04 am

New features in this release:
    1. Added 127.0.0.1 to hosts file.
    2. Fixed ownership of /lib/ directory.
    3. Removed ViewTube, GreaseMonkey and xine-plugin for Firefox and Chromium to enable HTML5 video player in both browsers.
    4. Added Chromium shortcut to all desktops.
    5. Installed Samba network file sharing protocol - type "system-config-samba" in Terminal to configure the users and shared directories.
Enjoy!
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby jupo » Thu Aug 01, 2013 4:23 am

hello! Thanks again for the great images! everything works and feels great!

I'm using odroid-x, HDMI, SD-card.

one thing though, the 20130728 image booted and everything, but my wifi module doesn't seem to be working.
normally the led light is turned on indicating that its plugged in, and the OS can just pick up the surrounding wifi networks.

i'm using the wifi usb dongle sold by hardkernel btw.
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby magicroomy » Thu Aug 01, 2013 5:49 am

Thanx for the great image. Worked almost fine just out of the box.
Nevertheless I am also having trouble with the wireless dongle from hardkernel. Wifi does not work.
Wired connection via the ethernet plug works.
Any advice on that?
magicroomy
 
Posts: 9
Joined: Thu Aug 01, 2013 5:41 am
languages_spoken: english
ODROIDs: odroid-x, odroid-u3, odroid-c1, odroid-c2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby robroy » Thu Aug 01, 2013 6:51 am

one thing though, the 20130728 image booted and everything, but my wifi module doesn't seem to be working.
normally the led light is turned on indicating that its plugged in, and the OS can just pick up the surrounding wifi networks.

i'm using the wifi usb dongle sold by hardkernel btw.

Nevertheless I am also having trouble with the wireless dongle from hardkernel. Wifi does not work.

Thank you for the encouragement!

I'm sorry that the WiFi is not working. I don't actually have an Odroid-X, but I do have an -X2. I tested the image on my -X2 with the HK wifi dongle, and was able to connect to a WEP2 network normally.

I use the same image for -X, -X2, and -U2 with just the kernel swapped out, so I believe it's due to modules dependencies or something kernel-related.

Would either of you please try 1) typing "sudo depmod -a" in Terminal before rebooting? If that doesn't work, 2) use the kernel updater (http://builder.mdrjr.net/tools/kernel-update.sh) to install the latest official -X kernel into the image using the wired ethernet connection.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby jupo » Thu Aug 01, 2013 8:59 am

robroyhall wrote:I use the same image for -X, -X2, and -U2 with just the kernel swapped out, so I believe it's due to modules dependencies or something kernel-related.

Would either of you please try 1) typing "sudo depmod -a" in Terminal before rebooting? If that doesn't work, 2) use the kernel updater (http://builder.mdrjr.net/tools/kernel-update.sh) to install the latest official -X kernel into the image using the wired ethernet connection.


thx for the quick reply. I tried "sudo depmod -a" and rebooting but that didnt work. I'll try installing the official -x kernel tomorrow to see if that works. cheers!
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby robroy » Fri Aug 02, 2013 7:03 am

jupo wrote:
robroyhall wrote:I use the same image for -X, -X2, and -U2 with just the kernel swapped out, so I believe it's due to modules dependencies or something kernel-related.

Would either of you please try 1) typing "sudo depmod -a" in Terminal before rebooting? If that doesn't work, 2) use the kernel updater (http://builder.mdrjr.net/tools/kernel-update.sh) to install the latest official -X kernel into the image using the wired ethernet connection.


thx for the quick reply. I tried "sudo depmod -a" and rebooting but that didnt work. I'll try installing the official -x kernel tomorrow to see if that works. cheers!

Any luck? I'm guessing that there is a bug in the -X kernel that's preventing WiFi from working.. I noticed that you had the same problem with the Linaro Server build.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby jupo » Fri Aug 02, 2013 7:00 pm

Unfortunately no luck.

Yes, i think ubuntu server issue is related to this one. maybe some tweaking needs to be done on the kernel for the chipset of my wifi dongle (rt5370) on -x.

i was trying to figure out how to just downgrade the kernel from 3.8.x.x to 3.0.x.x since it was working on the earlier versions... but i couldnt find out how x) so im just using an older image for now
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby robroy » Sat Aug 03, 2013 1:17 am

jupo wrote:Unfortunately no luck.

Yes, i think ubuntu server issue is related to this one. maybe some tweaking needs to be done on the kernel for the chipset of my wifi dongle (rt5370) on -x.

i was trying to figure out how to just downgrade the kernel from 3.8.x.x to 3.0.x.x since it was working on the earlier versions... but i couldnt find out how x) so im just using an older image for now


I published a 3.0 kernel under my "Linux Rare Gems and Stable Kernels" post, but only for -X2 and -U2.

Would you please try one more test for me? I released a version of Kali for the Odroid-X with the same kernel: viewtopic.php?f=23&t=1744 and I know that the wireless definitely works when I run the -X version on my -X2.

If you're still not able to get the HK wireless adapter to work with Kali, then we can submit a bug report to the HK devs and include any error messages that you see in the /var/log/kern.log file after booting.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby jupo » Sun Aug 04, 2013 12:25 am

robroyhall wrote:Would you please try one more test for me? I released a version of Kali for the Odroid-X with the same kernel: viewtopic.php?f=23&t=1744 and I know that the wireless definitely works when I run the -X version on my -X2.


Hey robroy,

I flashed my sd with kali linux kernel 3.8.13.4, and wifi works there :)
x_X now i'm confused. its the same kernel as the dreammachine image.. so i guess that rules out the kernel not supporting the dongle chipset?
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby robroy » Sun Aug 04, 2013 12:48 am

jupo wrote:
robroyhall wrote:Would you please try one more test for me? I released a version of Kali for the Odroid-X with the same kernel: viewtopic.php?f=23&t=1744 and I know that the wireless definitely works when I run the -X version on my -X2.


Hey robroy,

I flashed my sd with kali linux kernel 3.8.13.4, and wifi works there :)
x_X now i'm confused. its the same kernel as the dreammachine image.. so i guess that rules out the kernel not supporting the dongle chipset?

Thats good news! Its probably an oversight in how I installed /lib/modules, so I will recopy the -X kernel into Dream Machine during my next release cycle.

In the meantime, you can try using the kernel update script found at builder.mdrjr.net/tools to repair your copy :)

Thank you for testing!
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby jupo » Wed Aug 07, 2013 3:10 am

it's strange, when i use the kernel-update.sh script, the screen resolution drops down from 1080p to 720p, and wifi still doesn't work.

dmesg does reveal that the wifi dongle is connected-- it recognizes it connected to the USB port and says its Ralink blah blah, but the network indicator in the top menu doesn't show any wifi networks.

No worries, I'll wait until your next release since i'm in no rush to use my board. Again, thx for your time and support :)
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby mdrjr » Wed Aug 07, 2013 3:23 am

ahhh change the boot script on /media/boot
You are at 720p copy the 1080p for to boot.scr and it will be 1080
mdrjr
Site Admin
 
Posts: 11695
Joined: Fri Feb 22, 2013 11:34 pm
Location: Brazil
languages_spoken: english, portuguese
ODROIDs: -

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130728)

Unread postby jupo » Wed Aug 07, 2013 9:29 pm

ah, ok. that solves the resolution issue :) thx mdrjr
jupo
 
Posts: 14
Joined: Thu Apr 04, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X rev.4

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby robroy » Sat Aug 10, 2013 1:12 am

New features in this release:
    1. Uninstalled Xine Plugin and GreaseMonkey Script Manager for Firefox and Chromium now that the native HTML5 video players are working properly.
    2. Installed Samba server (sudo system-config-samba)
    3. Installed tasksel, browser-plugin-gnash, gcc-multilib, gtk-doc-tools, and chromium-codecs-ffmpeg-extra for improved application development and HTML5 video player support.
    3. Remove seldom-used Neogeo and Amiga emulators.
Enjoy!
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby tokki2cut » Tue Aug 13, 2013 12:28 am

The 20130809 image works impressively on my X except "wired network". I checked dmesg but could not spot any clues.

Anyone tried this image on X?
tokki2cut
 
Posts: 5
Joined: Fri Mar 08, 2013 9:52 am
Location: Daejeon, Korea
languages_spoken: english, korean, japanese
ODROIDs: ODROID-X, ODROID-PC, ODROID-U2, ODROID-XU

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby robroy » Tue Aug 13, 2013 3:17 am

I will doublecheck the image, thank you for letting me know.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby AtAus » Tue Aug 13, 2013 8:40 pm

Hello robroyhall, newbie here, great work, I have same issue as tokki2cut with 20130809 image on X, there is no network with HK wirless or wired.
- "sudo lsusb" lists the HK wireless adapter.
- "sudo depmod -a" indictes that there is an issue with the structure in "/lib/modules", it is looking for "3.8.13.4-robroyhall-odroidx" but "3.8.13.4-robroyhall-odroidu2" is there. Replacing this with "3.8.13.3-robroyhall-odroidx" and renaming to "3.8.13.4-robroyhall-odroidx" from earlier image gets past depmod but causes memory location errors, expected this :-(.
- the file "build" inside "3.8.13.3-robroyhall-odroidx" or "3.8.13.4-robroyhall-odroidu2" links to "/home/odroid/Documents/kernel/odroid-3.8.y" but it does not exist on "rootfs".
- the file "source" inside "3.8.13.3-robroyhall-odroidx" or "3.8.13.4-robroyhall-odroidu2" links to "/home/odroid/Documents/kernel/odroid-3.8.y" but it does not exist on "rootfs".

Also just an observation about 20130809 image, it must have been moved / xfered via a device that spent time in an Apple computer, as the following hidden directories are in the "BOOT" partition ( ".fseventsd", ".Spotlight-V100", ".Trashes", plus hidden file "._.Trashes" ), these files are generated by Apple OS on msdos partitions, I do not have an Apple product so where did they come from, earlier images did not have them.

Keep up the great work :-)
AtAus
 
Posts: 2
Joined: Tue Aug 13, 2013 8:02 pm
languages_spoken: english
ODROIDs: Odroid-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby robroy » Tue Aug 13, 2013 9:30 pm

The /lib/modules directory was miscopied in this version. I will upload a new image soon. Thank you for testing!

EDIT: An updated copy of the image is on the server.

FWIW, I verified that the HK wireless adapter and built-in ethernet are working properly when I boot this image on my -X2 :)
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby KC7NOA » Wed Aug 14, 2013 2:15 pm

Well i tried 20130809 ... i dont have lan for some reason .. and display is 4/5 .... my setting is 720p60Hz ....

Thats the same setting i used before i had a loss of HDMI from the X2 ...
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby robroy » Wed Aug 14, 2013 2:27 pm

KC7NOA wrote:Well i tried 20130809 ... i dont have lan for some reason .. and display is 4/5 .... my setting is 720p60Hz ....

Thats the same setting i used before i had a loss of HDMI from the X2 ...

You probably got your copy before I fixed the build issue.

The upload finished a few minutes ago, so please re-download and try the updated version.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby KC7NOA » Wed Aug 14, 2013 11:14 pm

robroyhall wrote:
KC7NOA wrote:Well i tried 20130809 ... i dont have lan for some reason .. and display is 4/5 .... my setting is 720p60Hz ....

Thats the same setting i used before i had a loss of HDMI from the X2 ...

You probably got your copy before I fixed the build issue.

The upload finished a few minutes ago, so please re-download and try the updated version.



Can do ... im on it ....
KC7NOA
 
Posts: 834
Joined: Wed Feb 27, 2013 2:25 pm
languages_spoken: english
ODROIDs: Odroid-X2(blown HDMI output)
Odroid-C2 to replace X2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby tokki2cut » Wed Aug 14, 2013 11:17 pm

robroyhall wrote:The /lib/modules directory was miscopied in this version. I will upload a new image soon. Thank you for testing!

EDIT: An updated copy of the image is on the server.

FWIW, I verified that the HK wireless adapter and built-in ethernet are working properly when I boot this image on my -X2 :)


Network device problem is now solved with the updated image! Thanks for your timely update!
tokki2cut
 
Posts: 5
Joined: Fri Mar 08, 2013 9:52 am
Location: Daejeon, Korea
languages_spoken: english, korean, japanese
ODROIDs: ODROID-X, ODROID-PC, ODROID-U2, ODROID-XU

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130809)

Unread postby AtAus » Thu Aug 15, 2013 9:14 pm

Thanks rob for quick update, HK wirless and wired are now working.
- had to edit 'blacklist-ralink.conf' and insert # before 'rt2800usb' and 'rt2800lib' then reboot for HK wirless to work.
cu, off to soccer :-).
AtAus
 
Posts: 2
Joined: Tue Aug 13, 2013 8:02 pm
languages_spoken: english
ODROIDs: Odroid-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130903)

Unread postby robroy » Thu Sep 05, 2013 4:23 am

New features in this release:
    1. Installed kde-polkit-1 which is required for Kubuntu.
    2. Added odroid user to Administrator group.
    3. Ran 25 repository upgrades, current up to 9/3.
Upcoming features:
    1. XBMC 12 with hardware acceleration :o
Enjoy!
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130915)

Unread postby robroy » Mon Sep 16, 2013 1:52 am

New features in this release:
    XBMC 12.2 with hardware acceleration :o
    Kernel 3.18.13.8
    Oracle JDK 8 - September 2013
    Fixed KDE GLES transparency effects (more here: viewtopic.php?f=8&t=1102&p=16781#p16781)
    Installed 65 repository upgrades, current up to 9/15/2013
    Added joystick support to kernel (CONFIG_JOYDEV=m) for most controllers, including Xbox 360, Wiimote and PS3 (more here: http://www.winko-erades.nl/index.php?op ... se-the-wii)
    Installed axel, plasma-widget-network-manager, wmgui, wminput and jstest-gtk packages
Enjoy!
Last edited by robroy on Tue Sep 17, 2013 6:31 am, edited 1 time in total.
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130915)

Unread postby Tommy.Z » Mon Sep 16, 2013 11:52 pm

Hi robroyhall
there is no image (odroid-x) to download ??
Tommy.Z
 
Posts: 7
Joined: Sat Feb 23, 2013 10:31 pm
languages_spoken: german, english
ODROIDs: Odroid-X

Re: Ubuntu 13.04 Dream Machine for ODROID-X (20130915)

Unread postby robroy » Tue Sep 17, 2013 12:29 am

Tommy.Z wrote:Hi robroyhall
there is no image (odroid-x) to download ??

I'm still testing the -X image, look for it later tonight :D
Rob Roy, Editor-in-Chief of ODROID Magazine (submit an article | make a donation)
User avatar
robroy
 
Posts: 3394
Joined: Mon Feb 25, 2013 2:29 am
Location: San Francisco, California
languages_spoken: English
ODROIDs: Q2, X, X2, U2, U3, XU-E, XU3, XU4, C1, C1+, C2

Next

Return to Ubuntu

Who is online

Users browsing this forum: No registered users and 0 guests