[ROM][LineageOS 20.0][Android 13.0][Mali r44p0][Vulkan 1.3.231][ODROID-N2/N2L]

[voodik]

r44_vulkan.png (140.4 KiB) Viewed 2678 times

https://vulkan.gpuinfo.org/compare.php? ... 50#devices

[voodik]

Alpha testers needed
Because as first look I got same results like with r21p0 I need some alpha testers.
If no major issues found i will prefer switch r21p0 version to r44p0.
I can't maintain much spitted versions Also every version claim about 500GB storage

So people who wan't to help just let me know your hardware, ATV or non-ATV, update or selfinstall and i will prepare package for you.

Thanks!

[zyssai]

I can test non-ATV next week, with N2+ 4GB Emmc with selfinstall.

You're amazing mate

[mad_ady]

I can test the ATV version. N2, 4GB, update package. Also in the middle of next week. Thanks!

[jackk11111]

I can test all, odroid n2+ 4gb

[loznic89]

hi. i can test ATV version. N2 4 GB update package

[voodik]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

[jackk11111]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

But in n2+ 4gb version is useless?

[loznic89]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

[loznic89]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

But in n2+ 4gb version is useless?

yes, its useless. selfinstall Android AOSP non ATV. N2 and N2+

.zip Android TV version is only for update from last build r21p0. N2 and N2+

[jackk11111]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

I confirm not boot from PETITBOOT

[voodik]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

I confirm not boot from PETITBOOT

petitboot never been supported on my ROMS.

@tobetter
When you have a some free time, can we look at this ?

[jackk11111]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

I confirm not boot from PETITBOOT

petitboot never been supported on my ROMS.

@tobetter
When you have a some free time, can we look at this ?

your other ROMs boot from petiboot with the switch on SPI so you can choose whether to boot from MMC or sd. with this update it starts only with the switch on MMC, otherwise with SPI it doesn't boot

[jackk11111]

It gets stuck on this screen if I boot from petiboot in SPI

[voodik]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

I confirm not boot from PETITBOOT

petitboot never been supported on my ROMS.

@tobetter
When you have a some free time, can we look at this ?

your other ROMs boot from petiboot with the switch on SPI so you can choose whether to boot from MMC or sd. with this update it starts only with the switch on MMC, otherwise with SPI it doesn't boot

Wow)) I always thought petitboot doesn't work on my builds.
BTW i don't know initialization routine for it. @tobetter should help us.

@tobetter here is dtb change commit for gpu, is the petitboot load own dtb, or use OS one ?
https://github.com/voodik/android_kerne ... 6d2a0d8fad

[tobetter]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

I confirm not boot from PETITBOOT

petitboot never been supported on my ROMS.

@tobetter
When you have a some free time, can we look at this ?

your other ROMs boot from petiboot with the switch on SPI so you can choose whether to boot from MMC or sd. with this update it starts only with the switch on MMC, otherwise with SPI it doesn't boot

Wow)) I always thought petitboot doesn't work on my builds.
BTW i don't know initialization routine for it. @tobetter should help us.

@tobetter here is dtb change commit for gpu, is the petitboot load own dtb, or use OS one ?
https://github.com/voodik/android_kerne ... 6d2a0d8fad

Your OS had been supported by Petitboot if I remember correctly.
Petitboot does use the same DTB from selected OS without change by default, it is changed only when device tree overlay is applied by the boot script. Also the boot script runs from OS, Petitboot does change nothing.

[voodik]

Re Upload, fixed 2GB model support.
Android-13, Mali r44p0 test images for N2/N2+ as requested.
non-ATV-selfinstall
https://drive.google.com/file/d/1yschxl ... drive_link

ATV update (update only from r21p0 version )
https://drive.google.com/file/d/1xymelu ... sp=sharing

hi. updating ATV version and same as r21. fixes SCRCPY and SD CHANNELS working

I have not found more problems for my use, only that do not boot from PETITBOOT

Thanks again and regards

I confirm not boot from PETITBOOT

petitboot never been supported on my ROMS.

@tobetter
When you have a some free time, can we look at this ?

your other ROMs boot from petiboot with the switch on SPI so you can choose whether to boot from MMC or sd. with this update it starts only with the switch on MMC, otherwise with SPI it doesn't boot

Wow)) I always thought petitboot doesn't work on my builds.
BTW i don't know initialization routine for it. @tobetter should help us.

@tobetter here is dtb change commit for gpu, is the petitboot load own dtb, or use OS one ?
https://github.com/voodik/android_kerne ... 6d2a0d8fad

Your OS had been supported by Petitboot if I remember correctly.
Petitboot does use the same DTB from selected OS without change by default, it is changed only when device tree overlay is applied by the boot script. Also the boot script runs from OS, Petitboot does change nothing.

Thanks for clarification, figured out. Restored reset reg's in dtb. Only Ethernet reg preventing meson reset driver loading. But Ethernet can work without it. Later i will look into dwmac driver to understand how it handle reset address.

[voodik]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

[mad_ady]

I've installed lineage-20.0-odroidn2-r44p0-ATV.update.zip on top of my existing ATV system and all went well. I can see no changes - for the better, nor for the worse. But I'm not playing games or anything. Tested youtube, kodi with some videos - all ok.

[loznic89]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

boot correct from petitboot

[jackk11111]

2023-08-22-14-53-16-835.jpg (507.33 KiB) Viewed 2311 times

2023-08-22-14-53-16-835.jpg (507.33 KiB) Viewed 2311 times

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

This version is OK in dual boot mode with PETIBOOT and switch in SPI but install ONLY in MMC mode. In SPI error in recovery lineage

[loznic89]

yes. always update booting android from emmc without SPI

[zyssai]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

Hi voodik.
Selfinstall version get stucked on HK logo, red and blue lights keeps ON, with freshly new N2+ and 32gb Emmc.
Flashed with Balena directly from petitboot (with ums /dev/mmcblk0) (I have no Emmc writer).

[jackk11111]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

Hi voodik.
Selfinstall version get stucked on HK logo, red and blue lights keeps ON, with freshly new N2+ and 32gb Emmc.
Flashed with Balena directly from petitboot (with ums /dev/mmcblk0) (I have no Emmc writer).

SPI or MMC mode? Installation Works only MMC mode

[zyssai]

SPI or MMC mode? Installation Works only MMC mode

After flash is done with SPI mode, I switch to MMC, so there is the installing system update screen, then restart to HK logo.

[jackk11111]

SPI or MMC mode? Installation Works only MMC mode

After flash is done with SPI mode, I switch to MMC, so there is the installing system update screen, then restart to HK logo.

Flash works ONLY in MMC mode

[zyssai]

Flash works ONLY in MMC mode

Oh I just seen previous posts. So how to flash from MMC mode without Emmc writer?

Edit: just tried with no-vulkan version and works normally with SPI mode.

[jackk11111]

Flash works ONLY in MMC mode

Oh I just seen previous posts. So how to flash from MMC mode without Emmc writer?

It's impossible

[zyssai]

It's impossible

That's what I thought
Thanks for the help anyway.

[voodik]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

Hi voodik.
Selfinstall version get stucked on HK logo, red and blue lights keeps ON, with freshly new N2+ and 32gb Emmc.
Flashed with Balena directly from petitboot (with ums /dev/mmcblk0) (I have no Emmc writer).

Can you explain what is this, how to do this ?))

If you can install r21p0 version, just update via zip.

[voodik]

I've installed lineage-20.0-odroidn2-r44p0-ATV.update.zip on top of my existing ATV system and all went well. I can see no changes - for the better, nor for the worse. But I'm not playing games or anything. Tested youtube, kodi with some videos - all ok.

The main thing what i want to know, there is no major issues with media playback, Android UI etc.
Mali driver updates mainly providing vulnerability fixes. But this one just released few months ago and providing Vulkan API major changes.
Its supports upper level Vulkan features for Android at this moment.

As result, we have a Latest Android, with latest GPU driver )) So best SBC in the world

[jackk11111]

I've installed lineage-20.0-odroidn2-r44p0-ATV.update.zip on top of my existing ATV system and all went well. I can see no changes - for the better, nor for the worse. But I'm not playing games or anything. Tested youtube, kodi with some videos - all ok.

The main thing what i want to know, there is no major issues with media playback, Android UI etc.
Mali driver updates mainly providing vulnerability fixes. But this one just released few months ago and providing Vulkan API major changes.
Its supports upper level Vulkan features for Android at this moment.

As result, we have a Latest Android, with latest GPU driver )) So best SBC in the world

It's perfect for me

[voodik]

All update*.zip is updated

Backported and enabled Kernel PSI - better memory management.
All memory issues on 2GB model are gone, so for 4GB is also good update.
https://source.android.com/docs/core/pe ... nformation

Minor gralloc and power hal fixes.

https://drive.google.com/drive/folders/ ... sp=sharing

[오그라든다]

MMC부팅에서 하드커널 로고에서 멈춥니다
해결방법이 있을까요?

[jackk11111]

MMC부팅에서 하드커널 로고에서 멈춥니다
해결방법이 있을까요?

what problem?

[오그라든다]

MMC부팅에서 하드커널 로고에서 멈춥니다
해결방법이 있을까요?

what problem?

하드커널 로고 이미지에서 작동하지 않습니다
안드로이드13 mmc로 부팅했습니다

[오그라든다]

There is no change in the hard kernel logo when mmc boots with emmc It stopped

[오그라든다]

MMC부팅에서 하드커널 로고에서 멈춥니다
해결방법이 있을까요?

what problem?

There is no change in the hard kernel logo when mmc boots with emmc It stopped

[zyssai]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

Hi voodik.
Selfinstall version get stucked on HK logo, red and blue lights keeps ON, with freshly new N2+ and 32gb Emmc.
Flashed with Balena directly from petitboot (with ums /dev/mmcblk0) (I have no Emmc writer).

Can you explain what is this, how to do this ?))

If you can install r21p0 version, just update via zip.

For sure.
Start N2 SPI mode.
Exit to shell
Type ums /dev/mmcblk0
Connect USB OTG to computer.
Flash with Balena.
I use this method to backup too, using software like PowerISO.

Will try update from r21p0

[voodik]

All images updated with petitboot and 2GB RAM model fixes.
You can find selfinstall and update.zip here.
https://drive.google.com/drive/folders/ ... sp=sharing

Hi voodik.
Selfinstall version get stucked on HK logo, red and blue lights keeps ON, with freshly new N2+ and 32gb Emmc.
Flashed with Balena directly from petitboot (with ums /dev/mmcblk0) (I have no Emmc writer).

Can you explain what is this, how to do this ?))

If you can install r21p0 version, just update via zip.

For sure.
Start N2 SPI mode.
Exit to shell
Type ums /dev/mmcblk0
Connect USB OTG to computer.
Flash with Balena.
I use this method to backup too, using software like PowerISO.

Will try update from r21p0

And another method is, run ubuntu from Sd card in SPI mode.
Then use dd to write image to emmc.

[voodik]

Just noticed not only Vulkan updated. EGL implementation is also updated on r44p0

1.5 Android META-EGL vs 1.4 Android META-EGL in r21p0 )))

[오그라든다]

MMC부팅에서 하드커널 로고에서 멈춥니다
해결방법이 있을까요?

what problem?

viewtopic.php?t=47125

I got an image here Link 64-bit image on top

하드커널 로고 이미지에서 작동하지 않습니다
안드로이드13 mmc로 부팅했습니다

[zyssai]

And another method is, run ubuntu from Sd card in SPI mode.
Then use dd to write image to emmc.

Thanks, good to know. Will use it in the worst case.

[zyssai]

If you can install r21p0 version, just update via zip.

Unfortunately not working as r21p0 does not boot too.

[voodik]

If you can install r21p0 version, just update via zip.

Unfortunately not working as r21p0 does not boot too.

Just tested with ubuntu on Sd card.
Boot with connected SD and Emmc via petitboot (select linux).
Establish Ethernet connection. access SSH or UART Console .
Copied selfinstall.img to /root/ folder via scp (if on windows you can use WinSCP software)
then dd it

Code: Select all

dd if=/root/selfinstall-lineage-20.0-odroidn2-r44p0.img of=/dev/mmcblk0 bs=4096

shutdown, remove SD card, set switch to mmc boot then turn on odroid.

[zyssai]

Just tested with ubuntu on Sd card.
Boot with connected SD and Emmc via petitboot (select linux).
Establish Ethernet connection. access SSH or UART Console .
Copied selfinstall.img to /root/ folder via scp (if on windows you can use WinSCP software)
then dd it

Code: Select all

dd if=/root/selfinstall-lineage-20.0-odroidn2-r44p0.img of=/dev/mmcblk0 bs=4096

shutdown, remove SD card, set switch to mmc boot then turn on odroid.

Thanks I keep in mind and will test later.

If possible can you add persist.disable_bootmessages property in next release, to disable Tablet is starting msg at boot.

Thanks

[voodik]

Just tested with ubuntu on Sd card.
Boot with connected SD and Emmc via petitboot (select linux).
Establish Ethernet connection. access SSH or UART Console .
Copied selfinstall.img to /root/ folder via scp (if on windows you can use WinSCP software)
then dd it

Code: Select all

dd if=/root/selfinstall-lineage-20.0-odroidn2-r44p0.img of=/dev/mmcblk0 bs=4096

shutdown, remove SD card, set switch to mmc boot then turn on odroid.

Thanks I keep in mind and will test later.

If possible can you add persist.disable_bootmessages property in next release, to disable Tablet is starting msg at boot.

Thanks

It already added.

[voodik]

MMC부팅에서 하드커널 로고에서 멈춥니다
해결방법이 있을까요?

what problem?

viewtopic.php?t=47125

I got an image here Link 64-bit image on top

하드커널 로고 이미지에서 작동하지 않습니다
안드로이드13 mmc로 부팅했습니다

Sd card or EMMC ?
File name image you write ?
How you write image ? EMMC/SD USB Adapter ?

[zyssai]

If possible can you add persist.disable_bootmessages property in next release, to disable Tablet is starting msg at boot.

Thanks

It already added.

Oh sorry, I thought I already tried and not worked.
But it's ok it works, many thanks.

[loznic89]

Hi @voodik today I saw in ATV version that android tv launcher gave an error when updating in google play store, so I uninstalled it through ADB and now I'm trying to install a recent version apk but I always get this error:

Code: Select all

PS C:\Users\lozni\Downloads> adb install com.google.android.tvlauncher.apk
Performing Streamed Install
adb: failed to install com.google.android.tvlauncher.apk: Failure [INSTALL_FAILED_UPDATE_INCOMPATIBLE: Existing package com.google.android.tvlauncher signatures do not match newer version; ignoring!]
PS C:\Users\lozni\Downloads> adb shell pm uninstall -k --user 0 com.google.android.tvlauncher
Failure [not installed for 0]

i am using now projectivity launcher but Any tip to reinstall it before doing selfinstall? thanks and regards