Cloudshell2 beginner questions

odroidRapid
Posts: 81
Joined: Sun Oct 13, 2019 2:37 pm
languages_spoken: english
ODROIDs: HC2
Has thanked: 19 times
Been thanked: 1 time
Contact:

Cloudshell2 beginner questions

Post by odroidRapid »

I need clarification about some things related to cloudshell2 case.
What do the individual RAID options mean and which one should I choose if I want each hdd / ssd to be recognized separately?
I plan to mount one hdd and one ssd in the case, but I'm wondering if I can put two hdd in case and put one ssd in the outer case connect it to the usb3 port?

EDIT:
I wont to install armbian os and omv5 and I want to only boot from sd card and have all other os data on ssd. How can I do that?
Will 120 GB be enough or should I buy a bigger SSD?

User avatar
mad_ady
Posts: 9938
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
Location: Bucharest, Romania
Has thanked: 629 times
Been thanked: 770 times
Contact:

Re: Cloudshell2 beginner questions

Post by mad_ady »

Look for the JBOD jumper setting to have disks be independent.

You can use two HDDs and an external ssd, but note that:
1. You still need a small sd card to hold the bootloader/kernel (contents of the first partition of the stock image)
2. There is no usb3 svailable. It's usb2, sadly, so expect 20-30MB/s throughput
3. There is a tutorial on the wiki on how to transfer an OS: https://wiki.odroid.com/odroid-xu4/soft ... _webserver

Regarding size - I fun my nas off a 32G emmc and it's generally enough. My docker storage and databases lives off a ssd to reduce wear on the emmc.
These users thanked the author mad_ady for the post:
odroidRapid (Fri Aug 27, 2021 12:06 am)

AreaScout
Posts: 1757
Joined: Sun Jul 07, 2013 3:05 am
languages_spoken: german, english
ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
N1, Go, VU5A, Show2, CloudShell2,
H2, N2, VU7A, VuShell, Go2, C4
Has thanked: 109 times
Been thanked: 332 times
Contact:

Re: Cloudshell2 beginner questions

Post by AreaScout »

mad_ady wrote:
Thu Aug 26, 2021 8:01 pm
There is no usb3 svailable
You must have been mistaken here there are 2xUSB 3.0 Host, 1xUSB 2.0 Host

@odroidRapid

The HW RAID controller supports, RAID1 / RAID0 / JBOD / PM

RAID1 = Two hard disks appear as one disk you can only use the hard disk space from one disk as the whole contains of the first hard disk is mirrored to the second one automatically done by the RAID controller (has data redundancy)
RAID0 = Two hard disks appear as one disk you can use the maximum hard disk space, means two 4TB hard disks give you 8TB of hard disk space (has NO data redundancy) but is known to be faster in readings/writings compared to one disk
JBOD = Just a bunch of disks, other then on RAID1 and RAID0 hard disks can be of different sizes without losing hard disk space it is not so fast like RAID0, data are not distributed sector wise over all hard disk like on RAID0, instead one hard disk by the other is filled up with data
PM = Each HDD is recognised separately, it has no data redundancy you must backup all your data somewhere else (SDD or over network)
odroidRapid wrote:
Thu Aug 26, 2021 5:35 pm
I wont to install armbian os and omv5 and I want to only boot from sd card and have all other os data on ssd. How can I do that?
Will 120 GB be enough or should I buy a bigger SSD?
viewtopic.php?f=147&t=39319

Install my Armbian NAS Image on SD and boot from it, I do not recommend to install the OS on hard disk and use SD only for boot, the contains/data of your hard disks are not related to the OS, means if you ever want a newer OS, just flash a new image on SD mount your hdd's and you are good/back

RG
These users thanked the author AreaScout for the post:
odroidRapid (Fri Aug 27, 2021 12:06 am)

odroidRapid
Posts: 81
Joined: Sun Oct 13, 2019 2:37 pm
languages_spoken: english
ODROIDs: HC2
Has thanked: 19 times
Been thanked: 1 time
Contact:

Re: Cloudshell2 beginner questions

Post by odroidRapid »

Ok, for now I will use one hdd + one ssd in PM mode.
And if it possible I will boot from sd card and run os from ssd.
Hdd will be only for data.
I think this is best combination. Or maybe not?
I can put one usb flash drive in xu4 for docker and containers.
Or it is better keep docker and containers on ssd?

User avatar
mad_ady
Posts: 9938
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
Location: Bucharest, Romania
Has thanked: 629 times
Been thanked: 770 times
Contact:

Re: Cloudshell2 beginner questions

Post by mad_ady »

@AreaScout: really? I don't have a CS2, so I can't be sure, but I thought it used up the USB3 port(s) on the XU4 and converted them to SATA, without providing other ports... But since you have a CS2 - I'm sure you know better than me :D
These users thanked the author mad_ady for the post:
odroidRapid (Fri Aug 27, 2021 12:07 am)

User avatar
rooted
Posts: 8859
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 743 times
Been thanked: 403 times
Contact:

Re: Cloudshell2 beginner questions

Post by rooted »

If you want to use the drives separately go with JBOD, it's what I use on my CS2 and it's been working fine for years.

odroidRapid
Posts: 81
Joined: Sun Oct 13, 2019 2:37 pm
languages_spoken: english
ODROIDs: HC2
Has thanked: 19 times
Been thanked: 1 time
Contact:

Re: Cloudshell2 beginner questions

Post by odroidRapid »

As far as I can see for the lcd and fan configuration the link leads to ubuntu files.
I want to install armbian so I'm wondering if I can use these files or do I need some other files?

Do i need to install shutdown script like for HC2?

User avatar
odroid
Site Admin
Posts: 38317
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 2117 times
Been thanked: 1263 times
Contact:

Re: Cloudshell2 beginner questions

Post by odroid »

I am not sure if armbian kernel configuration is compatible with our Ubuntu or not.

odroidRapid
Posts: 81
Joined: Sun Oct 13, 2019 2:37 pm
languages_spoken: english
ODROIDs: HC2
Has thanked: 19 times
Been thanked: 1 time
Contact:

Re: Cloudshell2 beginner questions

Post by odroidRapid »

I will ask on armbian forum then.

AreaScout
Posts: 1757
Joined: Sun Jul 07, 2013 3:05 am
languages_spoken: german, english
ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
N1, Go, VU5A, Show2, CloudShell2,
H2, N2, VU7A, VuShell, Go2, C4
Has thanked: 109 times
Been thanked: 332 times
Contact:

Re: Cloudshell2 beginner questions

Post by AreaScout »

odroidRapid wrote:
Thu Aug 26, 2021 10:02 pm
I think this is best combination. Or maybe not?
The best combination is what fits best to your use case ;)

Try my LCD Display Info and Monitoring Tool, it runs under Ubuntu AND Debian, it controls your fan and gives useful info viewtopic.php?f=147&t=33860

RG
These users thanked the author AreaScout for the post (total 2):
odroid (Mon Aug 30, 2021 6:30 pm) • odroidRapid (Tue Aug 31, 2021 5:18 pm)

odroidRapid
Posts: 81
Joined: Sun Oct 13, 2019 2:37 pm
languages_spoken: english
ODROIDs: HC2
Has thanked: 19 times
Been thanked: 1 time
Contact:

Re: Cloudshell2 beginner questions

Post by odroidRapid »

This looks good. I plan to mount in cloudshell2 one disc and one ssd in PM mode and now I see that there could be problems with displaying data on lcd. Can this be fixed to see the disc even if it is not sda? I'm wondering if I should install the last fw v158.001.000.004 or it must be v158.001.000.001?

AreaScout
Posts: 1757
Joined: Sun Jul 07, 2013 3:05 am
languages_spoken: german, english
ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
N1, Go, VU5A, Show2, CloudShell2,
H2, N2, VU7A, VuShell, Go2, C4
Has thanked: 109 times
Been thanked: 332 times
Contact:

Re: Cloudshell2 beginner questions

Post by AreaScout »

    Latest firmware (004) is best to use, you can flash back 001 if you have troubles

    There is a config parameter inside cloudshell2-monitoring.conf config file CS_HDD_MOUNTP, you can config a unique mount point or device path to monitor, but you can only show hdd space from one hard disk and not two ! Maybe in later versions

    The Tool is more made for use of RAID controller capabilities and having the RAID controller in RAID 0,1 or JBOD mode, then only one disk is visible for the OS, running the tool with -i option from command line gives you plenty much information's about the RAID controller

    RG
    These users thanked the author AreaScout for the post:
    odroidRapid (Tue Aug 31, 2021 5:18 pm)

    odroidRapid
    Posts: 81
    Joined: Sun Oct 13, 2019 2:37 pm
    languages_spoken: english
    ODROIDs: HC2
    Has thanked: 19 times
    Been thanked: 1 time
    Contact:

    Re: Cloudshell2 beginner questions

    Post by odroidRapid »

    How to properly format and mount ssd on linux / armbian?

    odroidRapid
    Posts: 81
    Joined: Sun Oct 13, 2019 2:37 pm
    languages_spoken: english
    ODROIDs: HC2
    Has thanked: 19 times
    Been thanked: 1 time
    Contact:

    Re: Cloudshell2 beginner questions

    Post by odroidRapid »

    I want CS2 to only boot from the SD card, and have the OS and other data completely on the SSD.
    How to copy everything from SD card to SSD and set to only boot from SD card?

    odroidRapid
    Posts: 81
    Joined: Sun Oct 13, 2019 2:37 pm
    languages_spoken: english
    ODROIDs: HC2
    Has thanked: 19 times
    Been thanked: 1 time
    Contact:

    Re: Cloudshell2 beginner questions

    Post by odroidRapid »

    armbian-config is solution for that....
    After copying data from SD card to SSD I can boot from SD card and OS and data are on SSD.
    I have to fix gpt data for HDD...without that HDD wont mount

    I have one problem that I cannot fix alon so I need help.
    In openmediavault I can not save any change...error is:
    Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; omv-salt deploy run --no-color avahi 2>&1' with exit code '100': ERROR: The state 'avahi' does not exist

    Code: Select all

    Error #0:
    OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; omv-salt deploy run --no-color avahi 2>&1' with exit code '100': ERROR: The state 'avahi' does not exist in /usr/share/php/openmediavault/system/process.inc:195
    Stack trace:
    #0 /usr/share/php/openmediavault/engine/module/serviceabstract.inc(62): OMV\System\Process->execute()
    #1 /usr/share/openmediavault/engined/rpc/config.inc(167): OMV\Engine\Module\ServiceAbstract->deploy()
    #2 [internal function]: Engined\Rpc\Config->applyChanges(Array, Array)
    #3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
    #4 /usr/share/php/openmediavault/rpc/serviceabstract.inc(149): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array)
    #5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(588): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatuspt...', '/tmp/bgoutputlV...')
    #6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(159): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))
    #7 /usr/share/openmediavault/engined/rpc/config.inc(189): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array)
    #8 [internal function]: Engined\Rpc\Config->applyChangesBg(Array, Array)
    #9 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
    #10 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array)
    #11 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1)
    #12 {main}

    odroidRapid
    Posts: 81
    Joined: Sun Oct 13, 2019 2:37 pm
    languages_spoken: english
    ODROIDs: HC2
    Has thanked: 19 times
    Been thanked: 1 time
    Contact:

    Re: Cloudshell2 beginner questions

    Post by odroidRapid »

    I have strange problem with my Cloudshell2.
    Last few days my CS2 after reboot/start sometimes simply hang/freeze and I cannot connect to omv-gui or ssh to CS2.
    In fing app I can see that only open ports are 111 and 8000
    I did not notice this before.
    Before that I made some updates and install wireguard.
    The only thing I can do is unplug the power supply and plug it in again to restart CS2. After that, everything works properly.
    Does anyone have any idea what can I try to fix this?

    AreaScout
    Posts: 1757
    Joined: Sun Jul 07, 2013 3:05 am
    languages_spoken: german, english
    ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
    N1, Go, VU5A, Show2, CloudShell2,
    H2, N2, VU7A, VuShell, Go2, C4
    Has thanked: 109 times
    Been thanked: 332 times
    Contact:

    Re: Cloudshell2 beginner questions

    Post by AreaScout »

      Hi

      Du you have a different power adapter to test with your CS2 ? It could be that it's near to damage, if you have a multimeter you can measure the output voltage if it compares to the value on the type label, but it could still be some voltage drops or something

      RG

      User avatar
      rooted
      Posts: 8859
      Joined: Fri Dec 19, 2014 9:12 am
      languages_spoken: english
      Location: Gulf of Mexico, US
      Has thanked: 743 times
      Been thanked: 403 times
      Contact:

      Re: Cloudshell2 beginner questions

      Post by rooted »

      AreaScout wrote:
        Hi

        Du you have a different power adapter to test with your CS2 ? It could be that it's near to damage, if you have a multimeter you can measure the output voltage if it compares to the value on the type label, but it could still be some voltage drops or something

        RG
        This is more likely the culprit but nothing wrong with verifying it's not power related.
        Before that I made some updates and install wireguard.

        odroidRapid
        Posts: 81
        Joined: Sun Oct 13, 2019 2:37 pm
        languages_spoken: english
        ODROIDs: HC2
        Has thanked: 19 times
        Been thanked: 1 time
        Contact:

        Re: Cloudshell2 beginner questions

        Post by odroidRapid »

        @AreaScout
        The power supply, Odroid XU4 and Cloudshell2 case and board are new so hopefully not a problem in them. I have no way to check power supply. Can this be done with some app?
        The green light on the power supply is on all the time.

        @rooted
        By culprit do you think something went wrong with the update or installation of the wireguard?

        I also noticed that my hard drive is not going to spindown. I did not have this problem before.

        AreaScout
        Posts: 1757
        Joined: Sun Jul 07, 2013 3:05 am
        languages_spoken: german, english
        ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
        N1, Go, VU5A, Show2, CloudShell2,
        H2, N2, VU7A, VuShell, Go2, C4
        Has thanked: 109 times
        Been thanked: 332 times
        Contact:

        Re: Cloudshell2 beginner questions

        Post by AreaScout »

          Well there are more things to check
          1. Was the fan running or does the board gets to hot, did you checked the temperature when it was happen ?
          2. Is my cloudshell2-monitoing tool running, that would explain why the hard drives are not spin down
          I tend to a too hot board, but also the power adapter is a good tip, only because it's new does not mean it can't have a fault, check the temperature

          odroidRapid
          Posts: 81
          Joined: Sun Oct 13, 2019 2:37 pm
          languages_spoken: english
          ODROIDs: HC2
          Has thanked: 19 times
          Been thanked: 1 time
          Contact:

          Re: Cloudshell2 beginner questions

          Post by odroidRapid »

          I cannot ssh to CS2 when it hangs and LCD is on only between 12,00 -13,00 h so i cannot see temperatures.
          I did not check if fan is spinning. I will do that od CS2 hangs again.
          I will try fresh install to emmc card and not boot from sd card and running os from SSD.

          odroidRapid
          Posts: 81
          Joined: Sun Oct 13, 2019 2:37 pm
          languages_spoken: english
          ODROIDs: HC2
          Has thanked: 19 times
          Been thanked: 1 time
          Contact:

          Re: Cloudshell2 beginner questions

          Post by odroidRapid »

          Emmc have preinstalled Ubuntu but I need Armbian.
          What I need to do to boot Armbian from emmc?

          User avatar
          rooted
          Posts: 8859
          Joined: Fri Dec 19, 2014 9:12 am
          languages_spoken: english
          Location: Gulf of Mexico, US
          Has thanked: 743 times
          Been thanked: 403 times
          Contact:

          Re: Cloudshell2 beginner questions

          Post by rooted »

          Yes I mean likely a kernel update broke something.
          These users thanked the author rooted for the post:
          odroidRapid (Tue Nov 16, 2021 1:30 am)

          AreaScout
          Posts: 1757
          Joined: Sun Jul 07, 2013 3:05 am
          languages_spoken: german, english
          ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
          N1, Go, VU5A, Show2, CloudShell2,
          H2, N2, VU7A, VuShell, Go2, C4
          Has thanked: 109 times
          Been thanked: 332 times
          Contact:

          Re: Cloudshell2 beginner questions

          Post by AreaScout »

            Use my Debian NAS Image viewtopic.php?f=147&t=39319 boot from it, ssh to it and start armbian-config from there update the bootloader on eMMC to be able to support overlay files for dts, navigate to System -> Install -> Install update the boot loader -> Yes and reboot -> done

            RG

            odroidRapid
            Posts: 81
            Joined: Sun Oct 13, 2019 2:37 pm
            languages_spoken: english
            ODROIDs: HC2
            Has thanked: 19 times
            Been thanked: 1 time
            Contact:

            Re: Cloudshell2 beginner questions

            Post by odroidRapid »

            The emmc card was just bought as intended for the Odroid XU4. Isn't it enough to install Armbian on it with etcher?

            AreaScout
            Posts: 1757
            Joined: Sun Jul 07, 2013 3:05 am
            languages_spoken: german, english
            ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
            N1, Go, VU5A, Show2, CloudShell2,
            H2, N2, VU7A, VuShell, Go2, C4
            Has thanked: 109 times
            Been thanked: 332 times
            Contact:

            Re: Cloudshell2 beginner questions

            Post by AreaScout »

              eMMC is different than SD card, it already has the bootloader preinstalled on it, if you install my image and the LCD is working, you don't need to update the bootloader, it depends what version of uboot is preinstalled

              RG
              These users thanked the author AreaScout for the post:
              odroidRapid (Tue Nov 16, 2021 1:30 am)

              odroidRapid
              Posts: 81
              Joined: Sun Oct 13, 2019 2:37 pm
              languages_spoken: english
              ODROIDs: HC2
              Has thanked: 19 times
              Been thanked: 1 time
              Contact:

              Re: Cloudshell2 beginner questions

              Post by odroidRapid »

              CS2 hangs again.

              This time I received an email alert:
              The system monitoring needs your attention.
              Host: \odroidxu4-cs2
              Date: Thu, 18 Nov 2021 12:50:13
              Service: \odroidxu4-cs2
              Event: Resource limit matched
              Description: loadavg (1min) of 28.3 matches resource limit [loadavg (1min) > 16.0]
              This triggered the monitoring system to: alert

              I see that ssh port is open but I can not connect to CS2.
              Whit my android phone and enabled wireguard I can connect all other devices on my LAN except CS2 where my wireguard server is up :o

              User avatar
              mad_ady
              Posts: 9938
              Joined: Wed Jul 15, 2015 5:00 pm
              languages_spoken: english
              ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
              Location: Bucharest, Romania
              Has thanked: 629 times
              Been thanked: 770 times
              Contact:

              Re: Cloudshell2 beginner questions

              Post by mad_ady »

              Seems like a process is overloading the system. Most likely you won't be able to login manually either, except via serial (where the shell is already running). If you were to connect, you'll need to check top, free -m, dmesg to figure out what's hogging the CPU.

              odroidRapid
              Posts: 81
              Joined: Sun Oct 13, 2019 2:37 pm
              languages_spoken: english
              ODROIDs: HC2
              Has thanked: 19 times
              Been thanked: 1 time
              Contact:

              Re: Cloudshell2 beginner questions

              Post by odroidRapid »

              I have same error with fresh install.
              I suspect that wireguard in some way is doing that but I can not confirm 100%.
              Now CS2 hangs and cannot se its ip on network at all.
              Fan is spinning (I set fan to be on all the time) and tow leds on CS2 are red.

              EDIT:
              After unplug/replug the Ethernet cable I have acces to CS2 again but my SSD and HDD is not mouted I canno see them in OMV.
              Part of syslog:

              Code: Select all

              Nov 18 18:08:21 odroidxu4-CS2 systemd[1]: Starting WireGuard via wg-quick(8) for wg0...
              Nov 18 18:08:21 odroidxu4-CS2 systemd[1]: Starting Generate the prelogin message...
              Nov 18 18:08:21 odroidxu4-CS2 systemd[1]: Started /etc/rc.local Compatibility.
              Nov 18 18:08:22 odroidxu4-CS2 wg-quick[1626]: [#] ip link add wg0 type wireguard
              Nov 18 18:08:22 odroidxu4-CS2 kernel: [  190.354572] wireguard: WireGuard 1.0.20210606 loaded. See www.wireguard.com for information.
              Nov 18 18:08:22 odroidxu4-CS2 kernel: [  190.354579] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
              Nov 18 18:08:22 odroidxu4-CS2 systemd-udevd[1638]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
              Nov 18 18:08:22 odroidxu4-CS2 systemd-udevd[1638]: Using default interface naming scheme 'v240'.
              Nov 18 18:08:22 odroidxu4-CS2 wg-quick[1626]: [#] wg setconf wg0 /dev/fd/63
              Nov 18 18:08:22 odroidxu4-CS2 wg-quick[1626]: [#] ip -4 address add 10.253.5.1/24 dev wg0
              Nov 18 18:08:22 odroidxu4-CS2 networkd-dispatcher[1462]: WARNING:Unknown index 5 seen, reloading interface list
              Nov 18 18:08:22 odroidxu4-CS2 wg-quick[1626]: [#] ip link set mtu 1420 up dev wg0
              Nov 18 18:08:22 odroidxu4-CS2 systemd-networkd[443]: wg0: Gained carrier
              Nov 18 18:08:22 odroidxu4-CS2 wg-quick[1626]: [#] iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o enx001e06397234 -j MASQUERADE
              Nov 18 18:08:22 odroidxu4-CS2 systemd[1]: Started WireGuard via wg-quick(8) for wg0.
              Nov 18 18:08:29 odroidxu4-CS2 kernel: [  197.915357] .not responding...
              Nov 18 18:08:37 odroidxu4-CS2 systemd[1]: Started Generate the prelogin message.
              Nov 18 18:08:38 odroidxu4-CS2 kernel: [  206.879578] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
              Nov 18 18:08:39 odroidxu4-CS2 kernel: [  207.915115] .not responding...
              Nov 18 18:09:00 odroidxu4-CS2 systemd[1]: Starting Clean php session files...
              Nov 18 18:09:00 odroidxu4-CS2 systemd[1]: phpsessionclean.service: Succeeded.
              Nov 18 18:09:00 odroidxu4-CS2 systemd[1]: Started Clean php session files.
              Nov 18 18:09:08 odroidxu4-CS2 kernel: [  236.880419] sd 0:0:0:1: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
              Nov 18 18:09:08 odroidxu4-CS2 kernel: [  236.880472] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
              Nov 18 18:09:28 odroidxu4-CS2 kernel: [  256.881013] sd 0:0:0:0: [sda] Asking for cache data failed
              Nov 18 18:09:28 odroidxu4-CS2 kernel: [  256.881027] sd 0:0:0:0: [sda] Assuming drive cache: write through
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: dev-disk-by\x2duuid-51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.device: Job dev-disk-by\x2duuid-51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.device/start timed out.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: Timed out waiting for device /dev/disk/by-uuid/51aaedc7-92a9-4f9c-be03-53b2083b595d.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: Dependency failed for /srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: srv-dev\x2ddisk\x2dby\x2duuid\x2d51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.mount: Job srv-dev\x2ddisk\x2dby\x2duuid\x2d51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.mount/start failed with result 'dependency'.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/51aaedc7-92a9-4f9c-be03-53b2083b595d.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: systemd-fsck@dev-disk-by\x2duuid-51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.service: Job systemd-fsck@dev-disk-by\x2duuid-51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.service/start failed with result 'dependency'.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: dev-disk-by\x2duuid-51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.device: Job dev-disk-by\x2duuid-51aaedc7\x2d92a9\x2d4f9c\x2dbe03\x2d53b2083b595d.device/start failed with result 'timeout'.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: dev-disk-by\x2duuid-37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.device: Job dev-disk-by\x2duuid-37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.device/start timed out.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: Timed out waiting for device /dev/disk/by-uuid/37f0f7ce-b9ca-4cb8-898d-79c99de23baf.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: Dependency failed for /srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: srv-dev\x2ddisk\x2dby\x2duuid\x2d37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.mount: Job srv-dev\x2ddisk\x2dby\x2duuid\x2d37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.mount/start failed with result 'dependency'.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/37f0f7ce-b9ca-4cb8-898d-79c99de23baf.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: systemd-fsck@dev-disk-by\x2duuid-37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.service: Job systemd-fsck@dev-disk-by\x2duuid-37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.service/start failed with result 'dependency'.
              Nov 18 18:09:32 odroidxu4-CS2 systemd[1]: dev-disk-by\x2duuid-37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.device: Job dev-disk-by\x2duuid-37f0f7ce\x2db9ca\x2d4cb8\x2d898d\x2d79c99de23baf.device/start failed with result 'timeout'.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: dev-disk-by\x2duuid-8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.device: Job dev-disk-by\x2duuid-8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.device/start timed out.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Timed out waiting for device /dev/disk/by-uuid/8da1063e-6d3f-45f5-8efa-5126a9c2d0b8.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Dependency failed for /srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: srv-dev\x2ddisk\x2dby\x2duuid\x2d8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.mount: Job srv-dev\x2ddisk\x2dby\x2duuid\x2d8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.mount/start failed with result 'dependency'.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/8da1063e-6d3f-45f5-8efa-5126a9c2d0b8.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: systemd-fsck@dev-disk-by\x2duuid-8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.service: Job systemd-fsck@dev-disk-by\x2duuid-8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.service/start failed with result 'dependency'.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: dev-disk-by\x2duuid-8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.device: Job dev-disk-by\x2duuid-8da1063e\x2d6d3f\x2d45f5\x2d8efa\x2d5126a9c2d0b8.device/start failed with result 'timeout'.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting File System Quota Check...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started File System Quota Check.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting Enable File System Quotas...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started Enable File System Quotas.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Reached target Remote File Systems.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started Regular background program processing daemon.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting LSB: Advanced IEEE 802.11 management daemon...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting rng-tools.service...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting Permit User Sessions...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting LSB: service and resource monitoring daemon...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started LSB: Advanced IEEE 802.11 management daemon.
              Nov 18 18:09:33 odroidxu4-CS2 cron[1987]: (CRON) INFO (pidfile fd = 3)
              Nov 18 18:09:33 odroidxu4-CS2 cron[1987]: (CRON) INFO (Running @reboot jobs)
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started Permit User Sessions.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started Serial Getty on ttySAC2.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Reached target Login Prompts.
              Nov 18 18:09:33 odroidxu4-CS2 rng-tools[1990]: Starting Hardware RNG entropy gatherer daemon: rngd.
              Nov 18 18:09:33 odroidxu4-CS2 rngd[2000]: rngd 2-unofficial-mt.14 starting up...
              Nov 18 18:09:33 odroidxu4-CS2 rngd[2000]: entropy feed to the kernel ready
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started rng-tools.service.
              Nov 18 18:09:33 odroidxu4-CS2 CRON[2009]: (root) CMD (/usr/lib/armbian/armbian-apt-updates)
              Nov 18 18:09:33 odroidxu4-CS2 monit[2007]: Starting Monit 5.26.0 daemon with http interface at /run/monit.sock
              Nov 18 18:09:33 odroidxu4-CS2 monit[1992]: Starting daemon monitor: monit.
              Nov 18 18:09:33 odroidxu4-CS2 monit[2028]: Monit will delay for 5s on first start after reboot ...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started LSB: service and resource monitoring daemon.
              Nov 18 18:09:33 odroidxu4-CS2 loadcpufreq[1989]: Loading cpufreq kernel modules...done (none).
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting LSB: set CPUFreq kernel parameters...
              Nov 18 18:09:33 odroidxu4-CS2 cpufrequtils[2056]: CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...CPU2...CPU3...CPU4...CPU5...CPU6...CPU7...done.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started LSB: set CPUFreq kernel parameters.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting LSB: Set sysfs variables from /etc/sysfs.conf...
              Nov 18 18:09:33 odroidxu4-CS2 sysfsutils[2071]: Setting sysfs variables....
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started LSB: Set sysfs variables from /etc/sysfs.conf.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Reached target Multi-User System.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting Beep after system start...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting watchdog daemon...
              Nov 18 18:09:33 odroidxu4-CS2 sh[2078]: modprobe: FATAL: Module softdog not found in directory /lib/modules/5.4.159-odroidxu4
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: watchdog.service: Control process exited, code=exited, status=1/FAILURE
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: watchdog.service: Failed with result 'exit-code'.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Failed to start watchdog daemon.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: watchdog.service: Triggering OnFailure= dependencies.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting watchdog keepalive daemon...
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Reached target Graphical Interface.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Condition check resulted in Hide bootsplash after starting the system being skipped.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Starting Update UTMP about System Runlevel Changes...
              Nov 18 18:09:33 odroidxu4-CS2 sh[2081]: modprobe: FATAL: Module softdog not found in directory /lib/modules/5.4.159-odroidxu4
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: wd_keepalive.service: Control process exited, code=exited, status=1/FAILURE
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Started Update UTMP about System Runlevel Changes.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: wd_keepalive.service: Failed with result 'exit-code'.
              Nov 18 18:09:33 odroidxu4-CS2 systemd[1]: Failed to start watchdog keepalive daemon.
              Nov 18 18:09:34 odroidxu4-CS2 systemd[1]: openmediavault-beep-up.service: Succeeded.
              Nov 18 18:09:34 odroidxu4-CS2 systemd[1]: Started Beep after system start.
              Nov 18 18:09:34 odroidxu4-CS2 systemd[1]: Startup finished in 2min 49.528s (kernel) + 1min 32.828s (userspace) = 4min 22.356s.
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: '\odroidxu4-CS2' Monit 5.26.0 started
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: Lookup for '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' filesystem failed  -- not found in /proc/self/mounts
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' not mounted
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' unable to read filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' state
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' trying to restart
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: Lookup for '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' filesystem failed  -- not found in /proc/self/mounts
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' not mounted
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' unable to read filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' state
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' trying to restart
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: Lookup for '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' filesystem failed  -- not found in /proc/self/mounts
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' not mounted
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' unable to read filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' state
              Nov 18 18:09:38 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' trying to restart
              Nov 18 18:09:58 odroidxu4-CS2 kernel: [  286.882013] sd 0:0:0:1: [sdb] Test WP failed, assume Write Enabled
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' not mounted
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' unable to read filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' state
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' trying to restart
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' status failed (1) -- /srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf is not a mountpoint
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' not mounted
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' unable to read filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' state
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' trying to restart
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' status failed (1) -- /srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d is not a mountpoint
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' not mounted
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' unable to read filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' state
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' trying to restart
              Nov 18 18:10:08 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' status failed (1) -- /srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8 is not a mountpoint
              Nov 18 18:10:18 odroidxu4-CS2 kernel: [  306.882704] sd 0:0:0:1: [sdb] Asking for cache data failed
              Nov 18 18:10:18 odroidxu4-CS2 kernel: [  306.882722] sd 0:0:0:1: [sdb] Assuming drive cache: write through
              Nov 18 18:10:28 odroidxu4-CS2 kernel: [  316.882992] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' not mounted
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' unable to read filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' state
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' trying to restart
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' status failed (1) -- /srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf is not a mountpoint
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' not mounted
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' unable to read filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' state
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' trying to restart
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' status failed (1) -- /srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d is not a mountpoint
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' not mounted
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' unable to read filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' state
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' trying to restart
              Nov 18 18:10:39 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' status failed (1) -- /srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8 is not a mountpoint
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' not mounted
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' unable to read filesystem '/srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' state
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' trying to restart
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf' status failed (1) -- /srv/dev-disk-by-uuid-37f0f7ce-b9ca-4cb8-898d-79c99de23baf is not a mountpoint
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' not mounted
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' unable to read filesystem '/srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' state
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' trying to restart
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d' status failed (1) -- /srv/dev-disk-by-uuid-51aaedc7-92a9-4f9c-be03-53b2083b595d is not a mountpoint
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: Filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' not mounted
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' unable to read filesystem '/srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' state
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'filesystem_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' trying to restart
              Nov 18 18:11:09 odroidxu4-CS2 monit[2028]: 'mountpoint_srv_dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8' status failed (1) -- /srv/dev-disk-by-uuid-8da1063e-6d3f-45f5-8efa-5126a9c2d0b8 is not a mountpoint
              Nov 18 18:11:18 odroidxu4-CS2 kernel: [  366.884677] sd 0:0:0:1: [sdb] Optimal transfer size 33553920 bytes
              Nov 18 18:11:27 odroidxu4-CS2 systemd-networkd[443]: enx001e06397234: Lost carrier
              Nov 18 18:11:27 odroidxu4-CS2 avahi-daemon[1474]: Withdrawing address record for 192.168.1.4 on enx001e06397234.
              Nov 18 18:11:27 odroidxu4-CS2 systemd-networkd[443]: enx001e06397234: DHCP lease lost
              Nov 18 18:11:27 odroidxu4-CS2 avahi-daemon[1474]: Leaving mDNS multicast group on interface enx001e06397234.IPv4 with address 192.168.1.4.
              Nov 18 18:11:27 odroidxu4-CS2 avahi-daemon[1474]: Interface enx001e06397234.IPv4 no longer relevant for mDNS.
              Nov 18 18:11:27 odroidxu4-CS2 kernel: [  376.125126] r8152 6-1:1.0 enx001e06397234: carrier off
              Nov 18 18:11:28 odroidxu4-CS2 kernel: [  376.884797] sd 0:0:0:0: [sda] Spinning up disk...
              Nov 18 18:11:32 odroidxu4-CS2 systemd-networkd[443]: enx001e06397234: Gained carrier
              Nov 18 18:11:32 odroidxu4-CS2 kernel: [  380.839647] r8152 6-1:1.0 enx001e06397234: carrier on
              Nov 18 18:11:32 odroidxu4-CS2 systemd-networkd[443]: enx001e06397234: DHCPv4 address 192.168.1.4/24 via 192.168.1.1
              Nov 18 18:11:32 odroidxu4-CS2 avahi-daemon[1474]: Joining mDNS multicast group on interface enx001e06397234.IPv4 with address 192.168.1.4.
              Nov 18 18:11:32 odroidxu4-CS2 avahi-daemon[1474]: New relevant interface enx001e06397234.IPv4 for mDNS.
              Nov 18 18:11:32 odroidxu4-CS2 avahi-daemon[1474]: Registering new address record for 192.168.1.4 on enx001e06397234.IPv4.
              Nov 18 18:11:32 odroidxu4-CS2 systemd-networkd[443]: enx001e06397234: Configured

              This is driving me crazy :oops:

              AreaScout
              Posts: 1757
              Joined: Sun Jul 07, 2013 3:05 am
              languages_spoken: german, english
              ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
              N1, Go, VU5A, Show2, CloudShell2,
              H2, N2, VU7A, VuShell, Go2, C4
              Has thanked: 109 times
              Been thanked: 332 times
              Contact:

              Re: Cloudshell2 beginner questions

              Post by AreaScout »

                SSH to your CS2 if possible and try this command as root and post the output gdisk /dev/sda

                RG

                odroidRapid
                Posts: 81
                Joined: Sun Oct 13, 2019 2:37 pm
                languages_spoken: english
                ODROIDs: HC2
                Has thanked: 19 times
                Been thanked: 1 time
                Contact:

                Re: Cloudshell2 beginner questions

                Post by odroidRapid »

                gdisk /dev/sda

                Code: Select all

                GPT fdisk (gdisk) version 1.0.3
                
                Partition table scan:
                  MBR: protective
                  BSD: not present
                  APM: not present
                  GPT: present
                
                Found valid GPT with protective MBR; using GPT.

                odroidRapid
                Posts: 81
                Joined: Sun Oct 13, 2019 2:37 pm
                languages_spoken: english
                ODROIDs: HC2
                Has thanked: 19 times
                Been thanked: 1 time
                Contact:

                Re: Cloudshell2 beginner questions

                Post by odroidRapid »

                I don't know how long it will last, but at the moment everything is working properly. The only thing I did was disconnect and connect the USB3 cable from the Odroid XU4 to the Cloudshell2 board.
                I really don't know if it's possible that it wasn't connected properly.

                AreaScout
                Posts: 1757
                Joined: Sun Jul 07, 2013 3:05 am
                languages_spoken: german, english
                ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                N1, Go, VU5A, Show2, CloudShell2,
                H2, N2, VU7A, VuShell, Go2, C4
                Has thanked: 109 times
                Been thanked: 332 times
                Contact:

                Re: Cloudshell2 beginner questions

                Post by AreaScout »

                odroidRapid wrote:
                Sat Nov 20, 2021 11:58 pm
                I don't know how long it will last, but at the moment everything is working properly. The only thing I did was disconnect and connect the USB3 cable from the Odroid XU4 to the Cloudshell2 board.
                I really don't know if it's possible that it wasn't connected properly.
                Yes it is possible, this connection is a little bit week, do not use too much force when stick in the cable into that connector !

                odroidRapid
                Posts: 81
                Joined: Sun Oct 13, 2019 2:37 pm
                languages_spoken: english
                ODROIDs: HC2
                Has thanked: 19 times
                Been thanked: 1 time
                Contact:

                Re: Cloudshell2 beginner questions

                Post by odroidRapid »

                I just notice that if I try to see s.m.a.r.t Devices system hangs and sometimes after few minutes everything is ok but sometimes not.

                This is my chOpSmartinfo.sh result:

                Code: Select all

                /root$ /root/chOpSmartinfo.sh
                ERROR : This is a script to fix HDD disconnected from the system, 
                        when you access S.M.A.R.T information.
                        Read me using any text editor and fix it
                Okay. You did it already. You don't need to try it
                grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
                grep: /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc: No such file or directory
                ERROR : This is a script to fix HDD disconnected from the system, 
                        when you access S.M.A.R.T information.
                        Read me using any text editor and fix it
                You have to see "Okay" three times
                If you got an ERROR even one time, please modify the files by hand
                1. /usr/share/php/openmediavault/system/storage/smartinformation.inc
                2. /usr/share/openmediavault/engined/rpc/smart.inc
                3. /usr/share/php/openmediavault/system/storage/smartstoragedeviceabstract.inc
                How can I fix this to have 3 x Okay ?

                AreaScout
                Posts: 1757
                Joined: Sun Jul 07, 2013 3:05 am
                languages_spoken: german, english
                ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                N1, Go, VU5A, Show2, CloudShell2,
                H2, N2, VU7A, VuShell, Go2, C4
                Has thanked: 109 times
                Been thanked: 332 times
                Contact:

                Re: Cloudshell2 beginner questions

                Post by AreaScout »

                  Smartdata will only work for sda if you have a RAID config, sdb is hidden, use my tool to get smartdata for both disks using RAID 1 or 0, run this command from shell cloudshell2-monitoring -i

                  RG
                  These users thanked the author AreaScout for the post:
                  odroid (Mon Nov 22, 2021 10:31 am)

                  odroidRapid
                  Posts: 81
                  Joined: Sun Oct 13, 2019 2:37 pm
                  languages_spoken: english
                  ODROIDs: HC2
                  Has thanked: 19 times
                  Been thanked: 1 time
                  Contact:

                  Re: Cloudshell2 beginner questions

                  Post by odroidRapid »

                  I had no choice but to take desperate moves. I read in one post that the Odroid XU4 sometimes has problems with devices that are connected to USB3 ports, ie that it does not recognize them or lose the connection, and that USB3 ports should be cleaned with medical alcohol (70 - 90%). I did that and for now the system is stable.
                  I really don't know if my main problem with the system is in the USB3 ports of the Odroid XU4. :?:

                  AreaScout
                  Posts: 1757
                  Joined: Sun Jul 07, 2013 3:05 am
                  languages_spoken: german, english
                  ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                  N1, Go, VU5A, Show2, CloudShell2,
                  H2, N2, VU7A, VuShell, Go2, C4
                  Has thanked: 109 times
                  Been thanked: 332 times
                  Contact:

                  Re: Cloudshell2 beginner questions

                  Post by AreaScout »

                    It could also be a bad hard disk, I build a new CS2 for a friend with two brand new hard disks, but always had problems, disconnect, bad boot troubles with it, always the GPT was damaged checked with gdisk /dev/sda repair it, it was ok but after two reboots again defective, there was no other way to exchange the hard disks, after that -> rock stable, my personal CS2 runs now over some years and reading about troubles with CS2 is relatively rare

                    But here is a sum up:

                    Defective RAID controller
                    Defective USB Cable (of course that black one from XU4 to RAID controller board) that error was the most !
                    Defective Hard Disks

                    edit: That chOpSmartinfo.ch is for OMV4 but not OMV5 iirc

                    RG

                    odroidRapid
                    Posts: 81
                    Joined: Sun Oct 13, 2019 2:37 pm
                    languages_spoken: english
                    ODROIDs: HC2
                    Has thanked: 19 times
                    Been thanked: 1 time
                    Contact:

                    Re: Cloudshell2 beginner questions

                    Post by odroidRapid »

                    HDD and SSD are new. I don't believe that's the problem. Unfortunately, I don't have another USB cable, and as far as I can see, it should be the original cable for Cloudshell2, ie not a regular male-female USB3 cable.
                    This week I get a new emmc card (32gb original for Odroid XU4) so I will install the OS on it, and on the SSD docker while the HDD will be for storage only.
                    I only hope that while the system was hanging and while I had to unplug the power supply to restart it then there was no damage to the SSD or HDD. :shock:

                    cloudshell2-monitoring -i

                    Code: Select all

                    Check "/dev/sda" ...
                    
                      Get chip info ...
                    
                        Firmware version = 158.01.00.04
                        Manufacturer     = JMicron Technology Corp.
                        Product name     = JMS56X H/W RAID
                        Serial number    = 427491329
                    
                      Get SATA info ...
                    
                        SATA Port 0
                    
                          Model name        = WDC WD40EFZX-68AWUN0
                          Serial number     =      WD-WX12DA0JK1EN
                          Capacity          = 3726.00 GB
                          Port type         = 2 (RAID Disk)
                          Port speed        = 3 (Gen 3)
                          Page 0 state      = 2 (Hooked to PM)
                          RAID index        = 0
                          RAID member index = 0
                          Port              = 15
                    
                        SATA Port 1
                    
                          Model name        = ADATA SU650
                          Serial number     = 2L262L1EB6RG
                          Capacity          = 223.56 GB
                          Port type         = 1 (Hard Disk)
                          Port speed        = 3 (Gen 3)
                          Page 0 state      = 2 (Hooked to PM)
                          RAID index        = 0
                          RAID member index = 0
                          Port              = 1
                    
                      Get RAID port 0 info ...
                    
                        Model name       = WDC WD40EFZX-68AWUN0
                        Serial number    =      WD-WX12DA0JK1EN
                        Port state       = 129
                        Level            = 0 (RAID 0)
                        Capacity         = 3726.00 GB
                        State            = 3 (Normal)
                        Member count     = 1
                        Rebuild priority = 4096 (Medium)
                        Standby timer    = 0 sec
                        Password         =
                        Rebuild progress = 0.00 %
                    
                        Member 0
                    
                          Ready         = 1
                          LBA48 support = 1
                          SATA port     = 0
                          SATA page     = 0
                          SATA base     = 0
                          SATA size     = 3726.00 GB
                    
                      Get RAID port 1 info ...
                    
                        Port state = 0
                    
                      Get SMART info (disk 0) ...
                    
                        ID# | FLAG |THRES|VALUE|WORST| RAW_VALUE_H  | RAW_VALUE       | ATTRIBUTE_NAME
                    
                          1 | 002F |  51 | 100 | 253 | 000000000000 |               0 | Raw Read Error Rate (Vendor specific)
                          3 | 0027 |  21 | 232 | 222 | 000000000D48 |            3400 | Spin Up Time
                          4 | 0032 |   0 | 100 | 100 | 0000000000BD |             189 | Start/Stop Count
                          5 | 0033 | 140 | 200 | 200 | 000000000000 |               0 | Reallocated Sectors Count
                          7 | 002E |   0 | 100 | 253 | 000000000000 |               0 | Seek Error Rate (Vendor specific)
                          9 | 0032 |   0 | 100 | 100 | 00000000008E |             142 | Power-On Time Count
                         10 | 0032 |   0 | 100 | 100 | 000000000000 |               0 | Spin Retry Count
                         11 | 0032 |   0 | 100 | 253 | 000000000000 |               0 | Drive Calibration Retry Count
                         12 | 0032 |   0 | 100 | 100 | 00000000002E |              46 | Drive Power Cycle Count
                        192 | 0032 |   0 | 200 | 200 | 00000000000B |              11 | Power off Retract Cycle
                        193 | 0032 |   0 | 200 | 200 | 000000000140 |             320 | Load/Unload Cycle Count
                        194 | 0022 |   0 | 123 | 110 | 00000000001B |              27 | HDD Temperature
                        196 | 0032 |   0 | 200 | 200 | 000000000000 |               0 | Reallocation Event Count
                        197 | 0032 |   0 | 200 | 200 | 000000000000 |               0 | Current Pending Sector Count
                        198 | 0030 |   0 | 100 | 253 | 000000000000 |               0 | Off-Line Uncorrectable Sector Count
                        199 | 0032 |   0 | 200 | 200 | 000000000000 |               0 | Ultra ATA CRC Error Count
                        200 | 0008 |   0 | 100 | 253 | 000000000000 |               0 | Write Error Rate
                    
                    AreaScout wrote:
                    Mon Nov 22, 2021 6:51 pm
                      ...That chOpSmartinfo.ch is for OMV4 but not OMV5 iirc
                      How to fix this in OMV5.
                      Or simply avoid s.m.a.r.t settings in OMV5 ?

                      AreaScout
                      Posts: 1757
                      Joined: Sun Jul 07, 2013 3:05 am
                      languages_spoken: german, english
                      ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                      N1, Go, VU5A, Show2, CloudShell2,
                      H2, N2, VU7A, VuShell, Go2, C4
                      Has thanked: 109 times
                      Been thanked: 332 times
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by AreaScout »

                      odroidRapid wrote:
                      Mon Nov 22, 2021 7:03 pm
                      How to fix this in OMV5.
                      Or simply avoid s.m.a.r.t settings in OMV5 ?
                      If I am not mistaken, that error WAS only related to OMV4 and not on OMV5, if this happens again this must be a hardware error not a software problem, check if you can get such a USB-3.0 typ A to micro-B cable from a friend or someone, it is a quick and meaningful check

                      p.s.: Your smart data of sda looks very good, the disk is in a healthy and very good state

                      RG
                      These users thanked the author AreaScout for the post:
                      odroidRapid (Mon Nov 22, 2021 9:07 pm)

                      odroidRapid
                      Posts: 81
                      Joined: Sun Oct 13, 2019 2:37 pm
                      languages_spoken: english
                      ODROIDs: HC2
                      Has thanked: 19 times
                      Been thanked: 1 time
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroidRapid »

                      None of my USB to MicroSD card readers (+ Windows 7) want to recognize a new emmc card so I'm wondering if I can transfer armbian OS to emmc via armbian-config or do I have to do it with some USB to MicroSD card reader?

                      User avatar
                      odroid
                      Site Admin
                      Posts: 38317
                      Joined: Fri Feb 22, 2013 11:14 pm
                      languages_spoken: English, Korean
                      ODROIDs: ODROID
                      Has thanked: 2117 times
                      Been thanked: 1263 times
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroid »

                      Which card reader have you tried?
                      viewtopic.php?f=53&t=2725

                      odroidRapid
                      Posts: 81
                      Joined: Sun Oct 13, 2019 2:37 pm
                      languages_spoken: english
                      ODROIDs: HC2
                      Has thanked: 19 times
                      Been thanked: 1 time
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroidRapid »

                      Unfortunately I have a few no name readers that I don't see on the supported list

                      AreaScout
                      Posts: 1757
                      Joined: Sun Jul 07, 2013 3:05 am
                      languages_spoken: german, english
                      ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                      N1, Go, VU5A, Show2, CloudShell2,
                      H2, N2, VU7A, VuShell, Go2, C4
                      Has thanked: 109 times
                      Been thanked: 332 times
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by AreaScout »

                      odroidRapid wrote:
                      Tue Nov 23, 2021 3:35 pm
                      None of my USB to MicroSD card readers (+ Windows 7) want to recognize a new emmc card so I'm wondering if I can transfer armbian OS to emmc via armbian-config or do I have to do it with some USB to MicroSD card reader?
                      No you need a USB MicroSD card reader e.g like this one https://www.conrad.at/de/p/renkforce-cr ... 98497.html this one has no problems with eMMC

                      For example the ODROID N2 can be used as a card reader with connecting the board over the OTG port https://wiki.odroid.com/odroid-n2/os_im ... stallation

                      RG
                      These users thanked the author AreaScout for the post:
                      odroid (Tue Nov 23, 2021 4:57 pm)

                      odroidRapid
                      Posts: 81
                      Joined: Sun Oct 13, 2019 2:37 pm
                      languages_spoken: english
                      ODROIDs: HC2
                      Has thanked: 19 times
                      Been thanked: 1 time
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroidRapid »

                      Using armbian-config, I was able to set up armbian to boot from the emmc card. :D

                      lsblk

                      Code: Select all

                      NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
                      sda            8:0    0   3.7T  0 disk
                      └─sda1         8:1    0   3.7T  0 part
                      sdb            8:16   0 223.6G  0 disk
                      ├─sdb1         8:17   0  31.8G  0 part
                      └─sdb2         8:18   0 191.8G  0 part
                      mmcblk0      179:0    0  29.1G  0 disk
                      └─mmcblk0p1  179:1    0  28.8G  0 part /
                      mmcblk0boot0 179:16   0     4M  1 disk
                      mmcblk0boot1 179:32   0     4M  1 disk
                      zram0        253:0    0 995.2M  0 disk [SWAP]
                      zram1        253:1    0    50M  0 disk /var/log

                      I don't know why I have two boots ?
                      mmcblk0boot0 179:16 0 4M 1 disk
                      mmcblk0boot1 179:32 0 4M 1 disk

                      User avatar
                      mad_ady
                      Posts: 9938
                      Joined: Wed Jul 15, 2015 5:00 pm
                      languages_spoken: english
                      ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
                      Location: Bucharest, Romania
                      Has thanked: 629 times
                      Been thanked: 770 times
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by mad_ady »

                      Those are hidden partitions on the emmc used by the bootloader
                      These users thanked the author mad_ady for the post:
                      odroidRapid (Tue Nov 23, 2021 9:43 pm)

                      odroidRapid
                      Posts: 81
                      Joined: Sun Oct 13, 2019 2:37 pm
                      languages_spoken: english
                      ODROIDs: HC2
                      Has thanked: 19 times
                      Been thanked: 1 time
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroidRapid »

                      Is better to install Armbian Buster with 5.4.y kernel or Armbian Buster with 4.14.y kernel for Cloudshell2 with Openmediavault5 and LCD Display Info and Monitoring Tool?

                      AreaScout
                      Posts: 1757
                      Joined: Sun Jul 07, 2013 3:05 am
                      languages_spoken: german, english
                      ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                      N1, Go, VU5A, Show2, CloudShell2,
                      H2, N2, VU7A, VuShell, Go2, C4
                      Has thanked: 109 times
                      Been thanked: 332 times
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by AreaScout »

                      odroidRapid wrote:
                      Wed Nov 24, 2021 12:53 am
                      Is better to install Armbian Buster with 5.4.y kernel or Armbian Buster with 4.14.y kernel for Cloudshell2 with Openmediavault5 and LCD Display Info and Monitoring Tool?
                      Armbian Bullseye with Kernel 5.4 go and get it, push the download button ;)

                      odroidRapid
                      Posts: 81
                      Joined: Sun Oct 13, 2019 2:37 pm
                      languages_spoken: english
                      ODROIDs: HC2
                      Has thanked: 19 times
                      Been thanked: 1 time
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroidRapid »

                      Is not Bullseye for OMV6?

                      AreaScout
                      Posts: 1757
                      Joined: Sun Jul 07, 2013 3:05 am
                      languages_spoken: german, english
                      ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
                      N1, Go, VU5A, Show2, CloudShell2,
                      H2, N2, VU7A, VuShell, Go2, C4
                      Has thanked: 109 times
                      Been thanked: 332 times
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by AreaScout »

                      odroidRapid wrote:
                      Wed Nov 24, 2021 2:01 am
                      Is not Bullseye for OMV6?
                      Yes, you are right OMV6 I mean :)

                      odroidRapid
                      Posts: 81
                      Joined: Sun Oct 13, 2019 2:37 pm
                      languages_spoken: english
                      ODROIDs: HC2
                      Has thanked: 19 times
                      Been thanked: 1 time
                      Contact:

                      Re: Cloudshell2 beginner questions

                      Post by odroidRapid »

                      Can TRIM for SSD be enabled on Cloudshell2?

                      Post Reply

                      Return to “CloudShell”

                      Who is online

                      Users browsing this forum: No registered users and 1 guest