CoreELEC

Post Reply
User avatar
cdu13a
Posts: 353
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, C4, XU4, HC1, N2, N2+
Has thanked: 16 times
Been thanked: 113 times
Contact:

Re: CoreELEC

Post by cdu13a »

maple121 wrote:
Mon Jan 04, 2021 5:18 pm
cdu13a wrote:
Wed Sep 25, 2019 1:40 pm
@dtx

Instead of directly adding the 3440x1440p60hz video mode to the kernel, I took it as an opportunity to look into adding custom video mode support to CoreELEC.

If you:
  • Install this image, (preferable on a blank micro sd and not over top of your existing install.)
    CoreELEC-Amlogic-ng.arm-9.2-devel-1569372808-Odroid_N2.img.gz
  • Add the following to your config.ini

    Code: Select all

    modeline="3440,1440,319750,88819,60,3440,3520,3552,3600,1440,1468,1478,1481,1,0,1" 
  • Reboot
  • Goto Settings/System/Display/Resolution and select 3440x1440p
This should let you switch to 3440x1440p60hz (Which hopefully works :) , I unfortunately don't have a monitor that supports that resolution to test with)
@cdu13a

Can I get the similar version like this test version image?

I'm experiencing a problem for using 3440x1440 resolution with Coreelec 9.5.2(stable) version.
I tried to solve it with inserting modeline on config.ini and changed the resolution 3440x1440p60 (it was added with disp_add).
but nothing happened. it looks like modeline command is not working.

This is the reason why I'm asking you the test image.
The custom mode line option was unfortunately left behind when we switched kernels from the hardkernel one to a newer amlogic kernel a while back. It would need to be ported again from the Hardkernel kernel to be able to use it again, and unfortunately doing so is a bit more involved then just cherry picking a commit or two.

However looking at the current kernel that CoreELEC uses, it does seem like there are entries for 3440x1440p60hz in the kernel.

What currently happens when you try to add 3440x1440p60hz to a /storage/.kodi/userdata/disp_add file?

Maybe the values used for this mode in the kerenel are a little off, so we might be able to fix up the existing support in the kerenel to get it functioning for you.

edit: here is a test build that should support 3440x1440p60hz, you will still need to use the disp_add file but after that step it should hopefully be available and work. https://test.coreelec.org/cdu13a/public ... 795241.tar
These users thanked the author cdu13a for the post:
maple121 (Tue Jan 05, 2021 11:23 am)

maple121
Posts: 14
Joined: Tue Mar 27, 2018 3:27 pm
languages_spoken: English, Korean
ODROIDs: Odroid-C2
Odroid-XU4
Odroid-N2
Has thanked: 4 times
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by maple121 »

@cdu13a,

Thank you for your comment & Support.
This request is not that urgent. I can use 2560x1080p60hz rather than 3440x1440p60hz. I just want to maximize the performance of my monitor as possible as.

Below is my test result with 9.5.2(stable version)

1. with 2560x1080p60hz (with dis_add) : There is no problem. but when checking the monitor information, the refresh rate is 70hz or 90hz.
2. with 3440x1440p60hz (with dis_add) : it looks like GUI is not properly displayed. the screen shows the vsync, hsync mismatched case. (all image is scrambled as horizontal lines...). But when changing the resolution during playing the movie, the movie is showing well (changing the setting during the movie play with video option menu) but overplayed menu is displayed as horizontal lines and cannot recognize it. When checking the signal information from the monitor, it still shows the same resolution with previous setting. (if I change it from 1080p60hz, then it is still 1080p60hz. If I change it from 2560x1080p60hz, it is still 2560x1080 mode.)

Hope this will be fixed at the next version.

Thanks again!

maple121
Posts: 14
Joined: Tue Mar 27, 2018 3:27 pm
languages_spoken: English, Korean
ODROIDs: Odroid-C2
Odroid-XU4
Odroid-N2
Has thanked: 4 times
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by maple121 »

maple121 wrote:
Tue Jan 05, 2021 11:43 am
@cdu13a,

Thank you for your comment & Support.
This request is not that urgent. I can use 2560x1080p60hz rather than 3440x1440p60hz. I just want to maximize the performance of my monitor as possible as.

Below is my test result with 9.5.2(stable version)

1. with 2560x1080p60hz (with dis_add) : There is no problem. but when checking the monitor information, the refresh rate is 70hz or 90hz.
2. with 3440x1440p60hz (with dis_add) : it looks like GUI is not properly displayed. the screen shows the vsync, hsync mismatched case. (all image is scrambled as horizontal lines...). But when changing the resolution during playing the movie, the movie is showing well (changing the setting during the movie play with video option menu) but overplayed menu is displayed as horizontal lines and cannot recognize it. When checking the signal information from the monitor, it still shows the same resolution with previous setting. (if I change it from 1080p60hz, then it is still 1080p60hz. If I change it from 2560x1080p60hz, it is still 2560x1080 mode.)

Hope this will be fixed at the next version.

Thanks again!
I tested with your test version kernel.
1. pls don't mind what I mentioned in above with 2560x1080p60hz. it was due to the monitor's free sync mode.
2. Your test version for 3440x1440 works well. I could see all the GUI's with full size image. but when I play a video, the monitor turns off. I think it is a problem of the monitor...not Coreelec.

So, for now, it is OK for me. I don't think further test is possible due to my monitor's limitation. (it only displays 3440x1440p24hz....)
Really appreciated for your support. it was good for me doing these test with following your guidance.

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

some (maybe stupid?) Questions:
- how can i configure the movie info overlay (resolution, sound and so) on a long keypress button? On my remote "Info" i get always the movie info. With the addon "Keymap editor" i was not succesfull. (on the RPi i have have used this with success)
- if i download the n2 image for creating a new sd card there was a dtb.img double the size of that one, that has to copied manually in the root. Whats happend, if this was used instead the copied, bricking the box?
- if an update of the bootloader should be avail, what is to do? Copy simply the "spiboot.img" to the root and reboot?

User avatar
tobetter
Posts: 8434
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: Many
Location: Paju, South Korea
Has thanked: 490 times
Been thanked: 1332 times
Contact:

Re: CoreELEC

Post by tobetter »

tosh123 wrote:
Wed Jan 06, 2021 12:17 am
some (maybe stupid?) Questions:
- how can i configure the movie info overlay (resolution, sound and so) on a long keypress button? On my remote "Info" i get always the movie info. With the addon "Keymap editor" i was not succesfull. (on the RPi i have have used this with success)
- if i download the n2 image for creating a new sd card there was a dtb.img double the size of that one, that has to copied manually in the root. Whats happend, if this was used instead the copied, bricking the box?
- if an update of the bootloader should be avail, what is to do? Copy simply the "spiboot.img" to the root and reboot?
For Q3 regarding to the Petitboot update, plug in the network cable and confirm if IP address is obtained. Then run pb-update from the command line, this command will update to the latest version.
For Q2, I do not quite understand what's the question.

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

on "CoreELEC-Amlogic-ng.arm-9.2-nightly_20210104-Odroid_N2.img.gz" there is in root a
dtb.img with 143.360 bytes. (for wich machine it is?)
At now i copy over the g12b_s99x_odroid_n2plus.dtb from device_trees instead of using the above supplied one.

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

for 2: what to do with the image? How to mount it? (i have simply copied it as spiboot.img to root)

##############################################
# CoreELEC #
# https://coreelec.org #
##############################################

CoreELEC (official): nightly_20210105 (Amlogic-ng.arm)
CoreELEC:~ # pb-update
-sh: pb-update: not found

CoreELEC:~ # df
Filesystem 1K-blocks Used Available Use% Mounted on
devtmpfs 1893212 4 1893208 0% /dev
/dev/mmcblk1p1 524008 226672 297336 43% /flash
/dev/loop0 198656 198656 0 100% /
/dev/mmcblk1p2 29667193 13001292 16661805 44% /storage
tmpfs 1898140 0 1898140 0% /dev/shm
tmpfs 1898140 8628 1889512 0% /run
tmpfs 1898140 0 1898140 0% /sys/fs/cgroup
tmpfs 1898140 2628 1895512 0% /var
tmpfs 1898140 0 1898140 0% /tmp
CoreELEC:~ #

User avatar
cdu13a
Posts: 353
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, C4, XU4, HC1, N2, N2+
Has thanked: 16 times
Been thanked: 113 times
Contact:

Re: CoreELEC

Post by cdu13a »

tosh123 wrote:
Wed Jan 06, 2021 12:44 am
on "CoreELEC-Amlogic-ng.arm-9.2-nightly_20210104-Odroid_N2.img.gz" there is in root a
dtb.img with 143.360 bytes. (for wich machine it is?)
At now i copy over the g12b_s99x_odroid_n2plus.dtb from device_trees instead of using the above supplied one.
I believe the dtb.img in the install image may now contain the dtb for both the n2 and n2plus, hence it's larger size. Then the system chooses between the two dtb contained in the file depending on the device you have. There is however no harm in copying the device tree from the device_trees folder, since either way you should end up with the correct dtb being used.
These users thanked the author cdu13a for the post:
tobetter (Wed Jan 06, 2021 1:25 am)

User avatar
tobetter
Posts: 8434
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: Many
Location: Paju, South Korea
Has thanked: 490 times
Been thanked: 1332 times
Contact:

Re: CoreELEC

Post by tobetter »

tosh123 wrote:
Wed Jan 06, 2021 1:03 am
for 2: what to do with the image? How to mount it? (i have simply copied it as spiboot.img to root)

##############################################
# CoreELEC #
# https://coreelec.org #
##############################################

CoreELEC (official): nightly_20210105 (Amlogic-ng.arm)
CoreELEC:~ # pb-update
-sh: pb-update: not found

CoreELEC:~ # df
Filesystem 1K-blocks Used Available Use% Mounted on
devtmpfs 1893212 4 1893208 0% /dev
/dev/mmcblk1p1 524008 226672 297336 43% /flash
/dev/loop0 198656 198656 0 100% /
/dev/mmcblk1p2 29667193 13001292 16661805 44% /storage
tmpfs 1898140 0 1898140 0% /dev/shm
tmpfs 1898140 8628 1889512 0% /run
tmpfs 1898140 0 1898140 0% /sys/fs/cgroup
tmpfs 1898140 2628 1895512 0% /var
tmpfs 1898140 0 1898140 0% /tmp
CoreELEC:~ #
pb-update is the command of the Petitboot, not CoreELEC. If you use the Petitboot which is the boot manager for multiple OS, you have to run the command in the Petitboot command line.

User avatar
cdu13a
Posts: 353
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, C4, XU4, HC1, N2, N2+
Has thanked: 16 times
Been thanked: 113 times
Contact:

Re: CoreELEC

Post by cdu13a »

maple121 wrote:
Tue Jan 05, 2021 2:22 pm

I tested with your test version kernel.
1. pls don't mind what I mentioned in above with 2560x1080p60hz. it was due to the monitor's free sync mode.
2. Your test version for 3440x1440 works well. I could see all the GUI's with full size image. but when I play a video, the monitor turns off. I think it is a problem of the monitor...not Coreelec.

So, for now, it is OK for me. I don't think further test is possible due to my monitor's limitation. (it only displays 3440x1440p24hz....)
Really appreciated for your support. it was good for me doing these test with following your guidance.
If 3440x1440 works for the gui and stops working when you play a video, it's possible that it's trying to change to a different mode when you play the video that the display is not happy with. You could try whitelisting only the modes that you know work to keep it from trying to switch modes to something that makes the monitor unhappy. Using the limit the display colour depth to 8-bit option in Settings > System > CoreELEC may also keep the display from getting upset. CoreELEC is pretty good at figuring out if a display can support 10bit colour, and will automatically try to use 10-bit colour when the content is 10-bit, but sometimes it gets it wrong and this can lead to an unhappy display.

Also if you can connect to the device via ssh when the monitor gets unhappy and run dispinfo (it collects all the display information and uses pastebin to give you a convient URL to post to make it easier to see what is going on), this may provide some info about what is going wrong.
These users thanked the author cdu13a for the post:
maple121 (Wed Jan 06, 2021 12:28 pm)

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

tobetter wrote:
Wed Jan 06, 2021 1:25 am
pb-update is the command of the Petitboot, not CoreELEC. If you use the Petitboot which is the boot manager for multiple OS, you have to run the command in the Petitboot command line.
So for the simple CoreELEC usage there is no need for the petitboot update? Otherwise i assume the command was also included in CoreELEC distro?

User avatar
tobetter
Posts: 8434
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: Many
Location: Paju, South Korea
Has thanked: 490 times
Been thanked: 1332 times
Contact:

Re: CoreELEC

Post by tobetter »

tosh123 wrote:
Wed Jan 06, 2021 2:02 am
tobetter wrote:
Wed Jan 06, 2021 1:25 am
pb-update is the command of the Petitboot, not CoreELEC. If you use the Petitboot which is the boot manager for multiple OS, you have to run the command in the Petitboot command line.
So for the simple CoreELEC usage there is no need for the petitboot update? Otherwise i assume the command was also included in CoreELEC distro?
For sime usage, only to use CoreELEC, do not place the boot select switch SPI and boot from the memory card that CoreELEC is installed.

Georgetina
Posts: 69
Joined: Thu Oct 08, 2015 9:38 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by Georgetina »

I have Coreelec on my N2+ and it is working well. However I have a problem running Youtube as it seems I need@keys@ for the addon to work. Now I have tried to get ExpressVPN to work but have had the same problem that I cannot configure these addons as to do so needs a browser to "install" the keys to get the addons to work. can you advise please

Pendragon11
Posts: 9
Joined: Sat Apr 11, 2020 1:22 pm
languages_spoken: english
ODROIDs: N2
Has thanked: 2 times
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by Pendragon11 »

I'm unable to boot from USB SSD after updating from 9.2.3 to 9.2.5? I have tried both updating from within coreelec and then also by flashing the drive over USB. When I try to boot 9.2.5, it hangs in petitboot nsaying processing new USB drive and never proceeds. Anyone have experience with this?

Pendragon11
Posts: 9
Joined: Sat Apr 11, 2020 1:22 pm
languages_spoken: english
ODROIDs: N2
Has thanked: 2 times
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by Pendragon11 »

Pendragon11 wrote:
Wed Jan 06, 2021 10:14 am
I'm unable to boot from USB SSD after updating from 9.2.3 to 9.2.5? I have tried both updating from within coreelec and then also by flashing the drive over USB. When I try to boot 9.2.5, it hangs in petitboot nsaying processing new USB drive and never proceeds. Anyone have experience with this?
I'm an idiot. Petitboot update fixed it. Thought since it could boot USB on the current version all was good. Nope, needed an update. Fixed!
These users thanked the author Pendragon11 for the post:
tobetter (Wed Jan 06, 2021 1:52 pm)

Kaplan007
Posts: 5
Joined: Thu Jan 14, 2021 4:32 pm
languages_spoken: english
ODROIDs: Odroid C4
Odroid n2+
Has thanked: 1 time
Been thanked: 0
Contact:

Re: CoreELEC

Post by Kaplan007 »

Hi, now I have Odroid C4 with coreelec as MMC. It has problem with few larger 4K HEVC videos. Does this issue solve Odroid n2+? Can it play all formats smoothly?

Whats difference between video performance c4 and n2+?

User avatar
rooted
Posts: 8736
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 743 times
Been thanked: 377 times
Contact:

Re: CoreELEC

Post by rooted »

Kaplan007 wrote:Hi, now I have Odroid C4 with coreelec as MMC. It has problem with few larger 4K HEVC videos. Does this issue solve Odroid n2+? Can it play all formats smoothly?

Whats difference between video performance c4 and n2+?
If you are having a problem with some videos it must be unsupported by the hardware and is being software decoded.

User avatar
cdu13a
Posts: 353
Joined: Tue Jan 20, 2015 3:33 pm
languages_spoken: english
ODROIDs: C1, C2, C4, XU4, HC1, N2, N2+
Has thanked: 16 times
Been thanked: 113 times
Contact:

Re: CoreELEC

Post by cdu13a »

Kaplan007 wrote:
Thu Jan 14, 2021 4:36 pm
Hi, now I have Odroid C4 with coreelec as MMC. It has problem with few larger 4K HEVC videos. Does this issue solve Odroid n2+? Can it play all formats smoothly?

Whats difference between video performance c4 and n2+?
The C4 and N2+ are almost identical in their ability to decode and playback video content.

There recently was some improvements made in CoreELEC related to video playback so maybe try the nightly build of CoreELEC which can be found at https://relkai.coreelec.org/
The nightly builds are the latest development version of CoreELEC, so will have fixes for some issues that may occur with the stable builds.

User avatar
rooted
Posts: 8736
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 743 times
Been thanked: 377 times
Contact:

Re: CoreELEC

Post by rooted »

Unless it's software decoding, the N2+ will have quite an advantage there.

Kaplan007
Posts: 5
Joined: Thu Jan 14, 2021 4:32 pm
languages_spoken: english
ODROIDs: Odroid C4
Odroid n2+
Has thanked: 1 time
Been thanked: 0
Contact:

Re: CoreELEC

Post by Kaplan007 »

Can odroid n2+ with coreelec handle dolby atmos and dts:x passthrought?

User avatar
odroid
Site Admin
Posts: 38159
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 2045 times
Been thanked: 1221 times
Contact:

Re: CoreELEC

Post by odroid »

Kaplan007 wrote:
Wed Jan 20, 2021 5:13 pm
Can odroid n2+ with coreelec handle dolby atmos and dts:x passthrought?
Yes, Dolby Atmos and DTS:X passthrough worked fine when we tested CoreELEC 2019 August. It should work with the latest version too.

AnjunaBeats
Posts: 42
Joined: Fri Mar 29, 2019 6:47 am
languages_spoken: english, Spanish
ODROIDs: Odroid N2
Has thanked: 0
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by AnjunaBeats »

Some1 know if is possible install plex media server on coreelec? coz im looking for and it is impossible.

Thx

logo00
Posts: 2
Joined: Tue Sep 29, 2020 10:11 pm
languages_spoken: english, german
ODROIDs: Odroid N2
Has thanked: 1 time
Been thanked: 0
Contact:

Re: CoreELEC

Post by logo00 »

AnjunaBeats wrote:
Fri Mar 19, 2021 7:06 pm
Some1 know if is possible install plex media server on coreelec? coz im looking for and it is impossible.

Thx

Yes, you can use the arm docker container.

Sparklle
Posts: 1
Joined: Fri Mar 26, 2021 10:38 pm
languages_spoken: english
ODROIDs: N2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by Sparklle »

When I start my Odroid N2 / Corelec setup I just seen a black screen, then after about 10 secs the new Corelec Boot Screen is showed for about 3 ou 4 seconds and Kodi starts.

I realized that inside /flash there some files related to the splash screen boot:

boot-logo-1080.bmp.gz
timeout-logo-1080.bmp.gz
These files has a Hardkernel logo, that suppose to be displayed during this black screen time.

The log form dspinfo:
http://ix.io/2U9v

Some additional information:
  • SPI is set to eMMC
  • Coreelec is installed in the sd card
  • Don’t have any other operation system installed, this box is dedicated just for Coreelec.

kipsta
Posts: 5
Joined: Thu Jun 24, 2021 1:05 pm
languages_spoken: english
ODROIDs: Odroid C4, Odroid N2, Odroid N2+
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by kipsta »

Sorry but I have alreadyposted this in the Unbuntu area.
My N2 is showing the incorrect time and is not updating via ntp
I have looked at the system time with hwclock and it's is incorrect. The coreelec version of hwclock is also somewhat disabled I cannot changed the time with hwclock.
I also have a C4 running the same OS and the time is all okay and I have a N2+ that is running Ubuntu and that is fine too.
Any ideas?
TIA
kip

User avatar
tobetter
Posts: 8434
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: Many
Location: Paju, South Korea
Has thanked: 490 times
Been thanked: 1332 times
Contact:

Re: CoreELEC

Post by tobetter »

kipsta wrote:
Thu Jun 24, 2021 1:19 pm
Sorry but I have alreadyposted this in the Unbuntu area.
My N2 is showing the incorrect time and is not updating via ntp
I have looked at the system time with hwclock and it's is incorrect. The coreelec version of hwclock is also somewhat disabled I cannot changed the time with hwclock.
I also have a C4 running the same OS and the time is all okay and I have a N2+ that is running Ubuntu and that is fine too.
Any ideas?
TIA
kip
What's the output for hwclock -w and zcat /proc/config.gz | grep RTC?

kipsta
Posts: 5
Joined: Thu Jun 24, 2021 1:05 pm
languages_spoken: english
ODROIDs: Odroid C4, Odroid N2, Odroid N2+
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by kipsta »

Thanks for replying, Tobetter.
hwclock -w returns nothing.
The result of the other commands is:-

Code: Select all

CoreELEC:/ # zcat /proc/config.gz | grep RTC
CONFIG_AMLOGIC_VRTC=y
CONFIG_AMLOGIC_SMARTCARD=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# RTC interfaces
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
# I2C RTC drivers
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=y
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# SPI RTC drivers
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
# SPI and I2C RTC drivers
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# Platform RTC drivers
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
# on-CPU RTC drivers
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_SNVS is not set
# HID Sensor RTC drivers
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CoreELEC:/ #
CoreELEC:/ # CoreELEC:/ # zcat /proc/config.gz | grep RTC
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# RTC interfaces
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
# I2C RTC drivers
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=y
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
-sh: # CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
CoreELEC:/: not found
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# SPI RTC drivers
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
# SPI and I2C RTC drivers
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
CoreELEC:/ # CONFIG_AMLOGIC_VRTC=y
CoreELEC:/ # CONFIG_AMLOGIC_SMARTCARD=y
CoreELEC:/ # CONFIG_RTC_LIB=y
CoreELEC:/ # CONFIG_RTC_CLASS=y
CoreELEC:/ # CONFIG_RTC_HCTOSYS=y
CoreELEC:/ # CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CoreELEC:/ # CONFIG_RTC_SYSTOHC=y
CoreELEC:/ # CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CoreELEC:/ # # CONFIG_RTC_DEBUG is not set
CoreELEC:/ # # RTC interfaces
CoreELEC:/ # CONFIG_RTC_INTF_SYSFS=y
CoreELEC:/ # CONFIG_RTC_INTF_PROC=y
CoreELEC:/ # CONFIG_RTC_INTF_DEV=y
CoreELEC:/ # # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CoreELEC:/ # # CONFIG_RTC_DRV_TEST is not set
CoreELEC:/ # # I2C RTC drivers
CoreELEC:/ # # CONFIG_RTC_DRV_ABB5ZES3 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_ABX80X is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1307 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1374 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1672 is not set
CoreELEC:/ # CONFIG_RTC_DRV_HYM8563=y
CoreELEC:/ # # CONFIG_RTC_DRV_MAX6900 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RS5C372 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_ISL1208 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_ISL12022 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_X1205 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_PCF8523 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_PCF85063 is not set
CoreELEC:/ # CONFIG_RTC_DRV_PCF8563=y
CoreELEC:/ # # CONFIG_RTC_DRV_PCF8583 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_M41T80 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_BQ32K is not set
CoreELEC:/ # # CONFIG_RTC_DRV_S35390A is not set
CoreELEC:/ # # CONFIG_RTC_DRV_FM3130 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RX8010 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RX8581 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RX8025 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_EM3027 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RV8803 is not set
CoreELEC:/ # # SPI RTC drivers
CoreELEC:/ # # CONFIG_RTC_DRV_M41T93 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_M41T94 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1302 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1305 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1343 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1347 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1390 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_MAX6916 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_R9701 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RX4581 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RX6110 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RS5C348 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_MAX6902 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_PCF2123 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_MCP795 is not set
CoreELEC:/ # CONFIG_RTC_I2C_AND_SPI=y
CoreELEC:/ # # SPI and I2C RTC drivers
CoreELEC:/ # # CONFIG_RTC_DRV_DS3232 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_PCF2127 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RV3029C2 is not set
CoreELEC:/ # # Platform RTC drivers
CoreELEC:/ # # CONFIG_RTC_DRV_DS1286 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1511 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1553 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1685_FAMILY is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS1742 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_DS2404 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_STK17TA8 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_M48T86 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_M48T35 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_M48T59 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_MSM6242 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_BQ4802 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_RP5C01 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_V3020 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_ZYNQMP is not set
CoreELEC:/ # # on-CPU RTC drivers
CoreELEC:/ # # CONFIG_RTC_DRV_PL030 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_PL031 is not set
CoreELEC:/ # # CONFIG_RTC_DRV_SNVS is not set
CoreELEC:/ # # HID Sensor RTC drivers
CoreELEC:/ # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
Regards
kip

User avatar
tobetter
Posts: 8434
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: Many
Location: Paju, South Korea
Has thanked: 490 times
Been thanked: 1332 times
Contact:

Re: CoreELEC

Post by tobetter »

kipsta wrote:
Thu Jun 24, 2021 3:23 pm
Thanks for replying, Tobetter.
hwclock -w returns nothing.
The result of the other commands is:-
Thanks, don't you have two rtc nodes with ls /dev/rtc*?

kipsta
Posts: 5
Joined: Thu Jun 24, 2021 1:05 pm
languages_spoken: english
ODROIDs: Odroid C4, Odroid N2, Odroid N2+
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by kipsta »

I think I double pasted the results. Bit rusty with putty
CoreELEC (official): 19.2-Matrix_rc2 (Amlogic-ng.arm)

Code: Select all

CoreELEC:~ # zcat /proc/config.gz | grep RTC
CONFIG_AMLOGIC_VRTC=y
CONFIG_AMLOGIC_SMARTCARD=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# RTC interfaces
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
# I2C RTC drivers
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=y
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# SPI RTC drivers
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
# SPI and I2C RTC drivers
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# Platform RTC drivers
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
# on-CPU RTC drivers
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_SNVS is not set
# HID Sensor RTC drivers
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
Thanks
kip

kipsta
Posts: 5
Joined: Thu Jun 24, 2021 1:05 pm
languages_spoken: english
ODROIDs: Odroid C4, Odroid N2, Odroid N2+
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by kipsta »

G'day Tobetter
Sorry, but I'm not really sure I understand the two rtc nodes bit. See below
CoreELEC:~ # ls -l /dev/rtc*
lrwxrwxrwx 1 root root 4 Feb 4 05:41 /dev/rtc -> rtc0
crw------- 1 root root 251, 0 Feb 4 05:41 /dev/rtc0

Thannks
kip

User avatar
rooted
Posts: 8736
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 743 times
Been thanked: 377 times
Contact:

Re: CoreELEC

Post by rooted »

This is from my N2+ running CoreELEC 19.2 Matrix nighties.
CoreELEC (official): 19.2-Matrix_nightly_20210624 (Amlogic-ng.arm)

CoreELEC:~ # hwclock
Sun Jun 27 19:06:50 2021 0.000000 seconds
CoreELEC:~ # date
Sun Jun 27 14:06:53 CDT 2021
CoreELEC:~ # hwclock -w
CoreELEC:~ # hwclock
Sun Jun 27 14:07:32 2021 0.000000 seconds
CoreELEC:~ # date
Sun Jun 27 14:07:38 CDT 2021
CoreELEC:~ #
You can see RTC is working correctly as hwclock -w set the hw clock to the system time like it should. There is no output, it just does it.

User avatar
rooted
Posts: 8736
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 743 times
Been thanked: 377 times
Contact:

Re: CoreELEC

Post by rooted »

There is some kind of weirdness going on. When I reboot the system clock is set to an odd time I think before ntp runs then when it settles down the system time is set to local and hwclock is set to UTC.
CoreELEC:~ # date
Sun Jun 27 11:13:57 CDT 2021
CoreELEC:~ # hwclock
Sun Jun 27 16:14:01 2021 0.000000 seconds

After being booted for 25 seconds:

CoreELEC:~ # hwclock
Sun Jun 27 21:14:25 2021 0.000000 seconds
CoreELEC:~ # date
Sun Jun 27 16:14:27 CDT 2021
However if I disconnect the network and reboot the N2+ the time is set correctly from the hwclock which is all that really matters isn't it

One thing you may have not done is set the Timezone country and Timezone in Kodi:

System settings > Interface > Regional


albanibr
Posts: 43
Joined: Fri Aug 07, 2015 1:58 am
languages_spoken: english, portuguese
ODROIDs: C2 / N2 4gb
Location: Brazil
Has thanked: 6 times
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by albanibr »

The Thoradia repository is abandoned and does not receive updates for Coreelec 19, could someone indicate an alternative to torrents and medusa's addon?

https://github.com/thoradia/LibreELEC.t ... eelec-9.2/
These users thanked the author albanibr for the post:
coendeurloo (Mon Aug 09, 2021 9:26 pm)

User avatar
rooted
Posts: 8736
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 743 times
Been thanked: 377 times
Contact:

Re: CoreELEC

Post by rooted »

Never heard of Medusa and I use Real Debrid for torrent streaming.
These users thanked the author rooted for the post:
albanibr (Tue Aug 03, 2021 11:27 pm)

albanibr
Posts: 43
Joined: Fri Aug 07, 2015 1:58 am
languages_spoken: english, portuguese
ODROIDs: C2 / N2 4gb
Location: Brazil
Has thanked: 6 times
Been thanked: 1 time
Contact:

Re: CoreELEC

Post by albanibr »

https://github.com/pymedusa/Medusa/wiki/What-is-Medusa
Medusa is a program that downloads your favorite TV shows, then processes and stores them in your library. And that is all fully automated. Just set it up and as soon as there is a new episode released it gets downloaded.

So I register my favorite tv show, the quality of the file and the service it looks for on torrent sites, forwards it to the torrent service, looks for subtitles, renames and organizes the library in an elegant web interface
turning coreelec into an all-in-one (Media Center, NAS, torrent client etc)

But, it's piracy!
And I understand that some coreelec devs don't support it

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

[CoreElec 19.x]
4k and all was running fine, but i have not used for a long time 4k material - only watched the "normal" HD stuff. If i play a 4k video i get a black screen, the sound runs and i have "blindly" to stop the video. I have also as a test tried to set the GUI to 2160p30 - also the black screen.
After downgrading to 19.1 4k works again fine, even setup the GUI to 4k, upgrading to 19RC2 or RC3 brings the black screen. Again, downgrading to 19.1 works.
How can i dig out the problem with my gear?

mikec
Posts: 11
Joined: Sun Nov 29, 2020 3:49 pm
languages_spoken: english
ODROIDs: odroid-n2
Has thanked: 1 time
Been thanked: 0
Contact:

Re: CoreELEC

Post by mikec »

I can play 4k HEVC on a 1080p monitor using 19.2-Matrix_rc3. The 'Build:' line says 19.1 (19.1.0) with a git hash, but the 'Operating System:' line says 19.2 rc3.
I hope that helps.

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

No, i really mean 19.1 - Portisch released this on 12 May.
<https://github.com/CoreELEC/CoreELEC/releases>
Newer ones doesn't work for me so i had to disable the automatic update.

mikec
Posts: 11
Joined: Sun Nov 29, 2020 3:49 pm
languages_spoken: english
ODROIDs: odroid-n2
Has thanked: 1 time
Been thanked: 0
Contact:

Re: CoreELEC

Post by mikec »

Why not try the latest 19.2 RC3 ? It works for me. Maybe post a test file somewhere, and I will try to play it.

tosh123
Posts: 22
Joined: Tue Oct 04, 2016 2:57 am
languages_spoken: english
ODROIDs: Odroid C2
Has thanked: 0
Been thanked: 0
Contact:

Re: CoreELEC

Post by tosh123 »

thats what i wrote: with RC2 or RC3 i get a black screen on all UHD outputs. Reverting to 19.1 brings the picture back.

Lost Dog
Posts: 23
Joined: Thu Jan 03, 2019 9:09 am
languages_spoken: english
ODROIDs: C2
Has thanked: 2 times
Been thanked: 3 times
Contact:

Re: CoreELEC

Post by Lost Dog »

Any of you CoreELEC pro's wanting to help a newbie out?

I just picked up a N2+ (4Gb) and plan to use it as a frontend for my media collection (DVD, bluray, UHD). It's connected to a LG CX OLED and the media is on a server on my network.

It seems the N2 branch of CoreELEC is somewhat generic and does not make any changes for the N2+. Are there any files I need to adjust to use the higher clock speed? Any other system tweaks?

I've read the upscaling of my TV is much better than the N2 (or other boxes). How do I make sure it's playing the video resolution rather than upscaling to HD?

Anything else I'm missing?

Thanks!

Sholander
Posts: 171
Joined: Wed Jun 05, 2019 1:02 am
languages_spoken: english
ODROIDs: ODROID N2
Has thanked: 0
Been thanked: 21 times
Contact:

Re: CoreELEC

Post by Sholander »

Study the function and use of "Whitelist" in Kodi. This is a good article to start: https://discourse.osmc.tv/t/howto-guide ... ings/83919
These users thanked the author Sholander for the post:
Lost Dog (Tue Sep 28, 2021 6:34 am)

Lost Dog
Posts: 23
Joined: Thu Jan 03, 2019 9:09 am
languages_spoken: english
ODROIDs: C2
Has thanked: 2 times
Been thanked: 3 times
Contact:

Re: CoreELEC

Post by Lost Dog »

Sholander wrote:
Sun Sep 26, 2021 5:51 pm
Study the function and use of "Whitelist" in Kodi. This is a good article to start: https://discourse.osmc.tv/t/howto-guide ... ings/83919
That was a FANTASTIC link. It answered many questions. Thanks much!

Post Reply

Return to “Other OS”

Who is online

Users browsing this forum: No registered users and 0 guests