INA231 Support in Ubuntu mate 20.04

Post Reply
Danny18
Posts: 4
Joined: Fri Apr 09, 2021 12:44 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 1 time
Contact:

INA231 Support in Ubuntu mate 20.04

Post by Danny18 »

Luckily I finally got one piece of XU3 board to measure power consumption of cores. However, after I installing 20.04 i found there is no ina-231 folder under /sys/....
And I also failed tryingl to modprobe the ina231-sensor module. Is it support in 20.04? Or I have to use an old version of ubuntu mate?

User avatar
odroid
Site Admin
Posts: 37371
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 1785 times
Been thanked: 1138 times
Contact:

Re: INA231 Support in Ubuntu mate 20.04

Post by odroid »

We've not used 20.04 image on the XU3.
Can you check 'dmesg' output to make sure your board was detected as an XU3 or XU3L?

Also try older images to narrow down root causes.
These users thanked the author odroid for the post:
Danny18 (Mon Apr 12, 2021 2:37 pm)

Danny18
Posts: 4
Joined: Fri Apr 09, 2021 12:44 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: INA231 Support in Ubuntu mate 20.04

Post by Danny18 »

I check the dmesg using dmesg | head -30. And line 6 is
: OF: fdt: Machine Model: Hardkernel Odroid XU3

So the board is correctly detected. I will try a 18.04 or even older version.
These users thanked the author Danny18 for the post:
odroid (Mon Apr 12, 2021 5:39 pm)

Post Reply

Return to “Ubuntu”

Who is online

Users browsing this forum: No registered users and 1 guest