[SOLVED] C4 - Issues after attaching an SSD

[OldGaf]

Hi All,

I have added an SSD via SATA3 to USB3 cable and as a result I have 2 problems.

1) I told it to use as internal storage and it moved a bunch of files over as expected.
Now my internal shared storage (32 gig eMMC ) is showing as 95% used. 22 GB of this is showing as being Photos & Videos.
When I go into that it only shows 1 image that I use for my desktop. If I tell it to Free up Space.. it reports that there is nothing to remove.
The USB/SSD also show correctly 11/71 GB used of 128.

2) ** FIXED ** My logic K400 keyboard becomes unresponsive when the SSD is plugged in. If I remove it it is fine again.
I also have an air mouse plugged in and that continues to function fine.

[mad_ady]

There's a known issue that high IO on usb3 ports can cause RF interference in 2.4GHz band. Try placing rf dongles (bt/wifi/wireless mice) on a hub over on the otg port.
https://www.pcmag.com/opinions/wireless ... Hz%20range).&text=In%20a%20nutshell—the%20noise,with%20the%202.4%20GHz%20signal.

[OldGaf]

There's a known issue that high IO on usb3 ports can cause RF interference in 2.4GHz band. Try placing rf dongles (bt/wifi/wireless mice) on a hub over on the otg port.
https://www.pcmag.com/opinions/wireless ... Hz%20range).&text=In%20a%20nutshell—the%20noise,with%20the%202.4%20GHz%20signal.

I just tried this with a super cheap and tiny hub... works like a charm!
(The back of my TV)

Thanks a lot!

[mad_ady]

Yes, proximity to the ports is the problem. The further you get, the better.

[OldGaf]

So still have the issue of the Emmc card looking like it is almost full when it is not.

[OldGaf]

Which Android OS image have you installed?

[OldGaf]

I am using the latest official image from your server.

[OldGaf]

I ended up flashing again with the ssd connected... Problem solved.