Dumb Question on Battery

[sm_1]

This battery is sold https://www.hardkernel.com/shop/3000mah ... o-advance/

which uses this style plug? Is this the correct plug?

https://www.newark.com/molex/51021-0200 ... dp/38C9869

To use this battery - assuming it fits the physical dimensions of the setup.

https://www.amazon.com/AKZYTUE-4200mAh- ... 07TWHHJZ6/

which has this plug.
https://images-na.ssl-images-amazon.com ... L1500_.jpg

Just cut the red and black wires from the AKZYTUE batter and fit on the Molex 51021-0200 plug? Correct?

Other things I should know assuming this is correct?

[odroid]

The battery comes with a Molex 51021-0200 (1.25mm pitch) wire connector.
The mating receptacle is Molex 53261-0271.

The Molex 51021-0200 connector is not compatible with the JST (2.0mm pitch) connector.

[sm_1]

Thank you. So I just cut the JST plug and replace with a 51021-0200? Yes?

[odroid]

I think so.

[L67GS]

Odroid, do you have a p/n for the pins as well? For those interested Mouser electronics in the U.S. has 51021-0200 for $0.20ea, $0.13ea qty of 10.

[L67GS]

Probably this crimp terminal pins.
https://www.mouser.com/ProductDetail/Mo ... cqBm3ys%3D
Compatible crimp terminals could be found in this link.
https://www.molex.com/molex/search/part ... uery=50058