SPI 1.2 Flash issue on OGA 1.0 and workaround

Post Reply
Christian_Haitian
Posts: 34
Joined: Sat Nov 10, 2018 10:40 pm
languages_spoken: english
ODROIDs: Go, Go Advance
Has thanked: 11 times
Been thanked: 13 times
Contact:

SPI 1.2 Flash issue on OGA 1.0 and workaround

Post by Christian_Haitian »

Greetings,

The Pre-built recovery image version 1.2 linked from the wiki (https://wiki.odroid.com/odroid_go_advan ... 1_20200512) will not boot on a OGA 1.0 as it doesn't include the non v11.dtb in it's fat32 boot partition. I was able to resolve this issue by copying the .dtb from the previous 1.1 version into the 1.2 recovery SD. I was then able to boot the 1.0 unit with the 1.2 recovery image and update the spi on the 1.0 unit to support the hardware revision detection process. I've found this to be important for the 1.0 units as they will not boot with distros that have been updated to support 1.1 OGA units.

Thanks
A jack of all trades is a master of none, but oftentimes better than a master of one

joy
Posts: 1448
Joined: Fri Oct 02, 2015 1:44 pm
languages_spoken: english
ODROIDs: ODROID-C1+, XU4, X
Has thanked: 158 times
Been thanked: 178 times
Contact:

Re: SPI 1.2 Flash issue on OGA 1.0 and workaround

Post by joy »

@Christian_Haitian,
Sorry for the inconvenience.
I will check related images and fix this issue soon.

joy
Posts: 1448
Joined: Fri Oct 02, 2015 1:44 pm
languages_spoken: english
ODROIDs: ODROID-C1+, XU4, X
Has thanked: 158 times
Been thanked: 178 times
Contact:

Re: SPI 1.2 Flash issue on OGA 1.0 and workaround

Post by joy »

Hi @Christian_Haitian,

A new spi recovery image will be released soon including an updated commit to fix this issue,
I will update the status once a new recovery image is uploaded at the wiki page.
Before it, please refer to the attached image if you need.
( OGA-recovery-20201013.tar.gz )

Code: Select all

OGA-recovery-20201013/sdcard_recovery_20201013.img
OGA-recovery-20201013/sdcard_recovery_20201013.img.md5sum

Code: Select all

V1.3 (2020/10/13)

Summary
Update GPIO Button Test Logic of OGA Auto Test
  1. Support multiple checks for a specific button
  2. Change test termination rule by entering F1+F6 key combination
Fix a missing DTB to support OGA HW rev 1.0
Thank you so much for your valuable report.
Attachments
OGA-recovery-20201013.tar.gz
(7.54 MiB) Downloaded 6 times

joy
Posts: 1448
Joined: Fri Oct 02, 2015 1:44 pm
languages_spoken: english
ODROIDs: ODROID-C1+, XU4, X
Has thanked: 158 times
Been thanked: 178 times
Contact:

Re: SPI 1.2 Flash issue on OGA 1.0 and workaround

Post by joy »

It's done and here is the wiki page.
https://wiki.odroid.com/odroid_go_advan ... 3_20201013
These users thanked the author joy for the post (total 2):
odroid (Wed Oct 14, 2020 1:28 pm) • Christian_Haitian (Wed Oct 14, 2020 2:50 pm)

Christian_Haitian
Posts: 34
Joined: Sat Nov 10, 2018 10:40 pm
languages_spoken: english
ODROIDs: Go, Go Advance
Has thanked: 11 times
Been thanked: 13 times
Contact:

Re: SPI 1.2 Flash issue on OGA 1.0 and workaround

Post by Christian_Haitian »

Thank you for the quick response.
A jack of all trades is a master of none, but oftentimes better than a master of one

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 1 guest