How NOT to break the shoulder button and LCD in the ODROID-GO-A

Post Reply
User avatar
odroid
Site Admin
Posts: 33686
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 511 times
Been thanked: 506 times
Contact:

How NOT to break the shoulder button and LCD in the ODROID-GO-A

Unread post by odroid » Wed Feb 19, 2020 11:35 am

If you twist the case shell when you disassemble your OGA, the tack-switch could be removed from the PCB.
Many people already broke the button while opening the case. :(

Image

Image

We've tried to send a PCB unit as much as possible but we have no more spare PCB for the replacement at this moment.
So you need to solder the button by your self or try a mobile phone repair shop.
Or, wait until we make a next batch in May. Sorry about that.

Please look into this guide and video when you need to open the case.
https://wiki.odroid.com/odroid_go_advan ... assembling
These users thanked the author odroid for the post:
dmckean44 (Wed Feb 19, 2020 2:58 pm)

User avatar
odroid
Site Admin
Posts: 33686
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 511 times
Been thanked: 506 times
Contact:

Re: How to break the shoulder button on the ODROID-GO-A PCB.

Unread post by odroid » Wed Feb 19, 2020 5:04 pm

A much better way to assemble the LCD module.
https://www.youtube.com/watch?v=ShFrKvPcjsE
These users thanked the author odroid for the post:
meveric (Thu Feb 20, 2020 12:16 am)

User avatar
shareef
Posts: 127
Joined: Sun Aug 12, 2018 4:29 pm
languages_spoken: english, italian, spanish
ODROIDs: odroid-go, odroid-go advance
Has thanked: 37 times
Been thanked: 13 times
Contact:

Re: How to break the shoulder button on the ODROID-GO-A PCB.

Unread post by shareef » Thu Feb 20, 2020 12:26 pm

Thanks for these videos! (and the background music :lol:)

andrewe1
Posts: 8
Joined: Fri Feb 14, 2020 3:25 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by andrewe1 » Fri Feb 21, 2020 3:50 am

I've seen some people saying that they've broken the clips on the case to make disassembly easier, since in the end it's still held on by 3 screws.

I will assemble my OGA this weekend, is this something you would recommend?

deerwings
Posts: 165
Joined: Mon Oct 08, 2018 9:11 am
languages_spoken: english
ODROIDs: Odroid Go, Odroid Go Advance
Has thanked: 3 times
Been thanked: 13 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by deerwings » Sat Feb 22, 2020 10:08 am

andrewe1 wrote:
Fri Feb 21, 2020 3:50 am
I've seen some people saying that they've broken the clips on the case to make disassembly easier, since in the end it's still held on by 3 screws.

I will assemble my OGA this weekend, is this something you would recommend?
Well, four screws unless you've broken one.

Atomizer_Zero
Posts: 10
Joined: Thu Feb 20, 2020 5:10 am
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 0
Been thanked: 2 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by Atomizer_Zero » Sat Feb 22, 2020 10:19 am

andrewe1 wrote:
Fri Feb 21, 2020 3:50 am
I've seen some people saying that they've broken the clips on the case to make disassembly easier, since in the end it's still held on by 3 screws.

I will assemble my OGA this weekend, is this something you would recommend?
Considering I plan on testing out some hardware mods on mine, I decided it was in my best interest to cut the clips off. This does make disassembly easier, but it potentially makes the case less rigid. If this is a concern for you, then i'd leave the clips on and follow the updated installation video to the "T". I think for most users, they probably want to keep the clips on, as they are building the unit to actually play it, not mod it.

andrewe1
Posts: 8
Joined: Fri Feb 14, 2020 3:25 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by andrewe1 » Sat Feb 22, 2020 2:57 pm

deerwings wrote:
Sat Feb 22, 2020 10:08 am
andrewe1 wrote:
Fri Feb 21, 2020 3:50 am
I've seen some people saying that they've broken the clips on the case to make disassembly easier, since in the end it's still held on by 3 screws.

I will assemble my OGA this weekend, is this something you would recommend?
Well, four screws unless you've broken one.
whoops, yeah I meant 4 lol.
Atomizer_Zero wrote:
Sat Feb 22, 2020 10:19 am
andrewe1 wrote:
Fri Feb 21, 2020 3:50 am
I've seen some people saying that they've broken the clips on the case to make disassembly easier, since in the end it's still held on by 3 screws.

I will assemble my OGA this weekend, is this something you would recommend?
Considering I plan on testing out some hardware mods on mine, I decided it was in my best interest to cut the clips off. This does make disassembly easier, but it potentially makes the case less rigid. If this is a concern for you, then i'd leave the clips on and follow the updated installation video to the "T". I think for most users, they probably want to keep the clips on, as they are building the unit to actually play it, not mod it.
Gotcha, I'll consider leaving them on then... Not sure why the case wasn't designed with a couple of more screws. It would make modding way easier and we wouldn't have to worry about breaking stuff when taking it apart.

deerwings
Posts: 165
Joined: Mon Oct 08, 2018 9:11 am
languages_spoken: english
ODROIDs: Odroid Go, Odroid Go Advance
Has thanked: 3 times
Been thanked: 13 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by deerwings » Sun Feb 23, 2020 12:20 am

andrewe1 wrote:
Sat Feb 22, 2020 2:57 pm
Gotcha, I'll consider leaving them on then... Not sure why the case wasn't designed with a couple of more screws. It would make modding way easier and we wouldn't have to worry about breaking stuff when taking it apart.
I was thinking the same thing. The case is rigid enough with the clips alone that you don't -need- the clips, because of how tight they are, which is pretty good if you don't intend to take it apart a lot. But it is the kind of case that you probably want to pre-plan your access to the pads you might need for hardware mods ahead of time, or otherwise modify a case specifically for the purposes of taking it apart while testing those mods, so you can then apply them to a case that won't be taken apart.

I have two spare cases that I'm holding onto for the meantime because I intend to paint them and reinstall my current hardware into one (And giving the other to a friend). But I've already had to take mine apart a couple of times for various things so I've gotten pretty good at it with a thin, flat blade to pop the clips free. As long as you're careful when you work your way around the case it's not so bad, but its the top clips that are the hardest, I think.

I've already broken two screws, thankfully they're in opposite corners. :)

User avatar
shareef
Posts: 127
Joined: Sun Aug 12, 2018 4:29 pm
languages_spoken: english, italian, spanish
ODROIDs: odroid-go, odroid-go advance
Has thanked: 37 times
Been thanked: 13 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by shareef » Sun Feb 23, 2020 3:27 am

So beyond breaking the shoulder buttons, it's entirely possible to break the power switch too :shock:. Oh and also worth noting not to forget to remove the microsd card when disassembling the case (luckily I caught that early enough in the process and didn't break it too). Good thing my younger brother fixes all kinds of portable consoles and is great at micro soldering, he will be fixing this for me later this weekend :). Oh and the reason I was even taking it apart to begin with after it was working perfectly is I had noticed that the screen had a few areas that were lighter from the lcd being flexed because I had the screws too tight on the pcb (like this viewtopic.php?f=196&t=37707&p=281467#p281448), I was taking it apart to loosen those screws. Oh well, live and learn! :)

Image

Paspartout
Posts: 48
Joined: Fri Dec 28, 2018 2:13 am
languages_spoken: english, german
ODROIDs: Odroid go
Has thanked: 11 times
Been thanked: 15 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by Paspartout » Tue Feb 25, 2020 7:09 pm

Hm, aren't the two holes on the pcb supposed to be filled with solder too, to strengthen the connection of the switches?
Or maybe some hot glue or superglue can be used to make it more robust. Every picture I saw had these empty.

I will receive my OGA today and wanna make sure I don't break anything.

User avatar
shareef
Posts: 127
Joined: Sun Aug 12, 2018 4:29 pm
languages_spoken: english, italian, spanish
ODROIDs: odroid-go, odroid-go advance
Has thanked: 37 times
Been thanked: 13 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by shareef » Wed Feb 26, 2020 2:29 am

I don't have it in front of me but I believe the 2 holes you're referring to are actually used to line up the pcb correctly with the lower part of the case (there are plastic pins from the lower case that go into those holes).

gritshelor
Posts: 8
Joined: Mon Feb 24, 2020 6:04 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by gritshelor » Wed Feb 26, 2020 9:06 pm

I'm wondering how many people break the switches because there is no haptic feedback and no click.
One shoulder button on my unit is maybe damaged. The button works but it feels like the cover does not move.
So maybe I'm not the only one and maybe some people use force to push the button until it breaks.

Paspartout
Posts: 48
Joined: Fri Dec 28, 2018 2:13 am
languages_spoken: english, german
ODROIDs: Odroid go
Has thanked: 11 times
Been thanked: 15 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by Paspartout » Fri Feb 28, 2020 1:09 am

gritshelor wrote:
Wed Feb 26, 2020 9:06 pm
I'm wondering how many people break the switches because there is no haptic feedback and no click.
One shoulder button on my unit is maybe damaged. The button works but it feels like the cover does not move.
So maybe I'm not the only one and maybe some people use force to push the button until it breaks.
For me there is a clear feedback and click on the shoulder buttons.
I assembled mine two days ago without a problem. I was extra careful though
for the screens and shoulder buttons.

hardknoxni69a
Posts: 7
Joined: Mon Mar 02, 2020 10:49 am
languages_spoken: english
ODROIDs: Odroid-Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by hardknoxni69a » Tue Mar 03, 2020 1:03 pm

So my shoulder buttons work and appear to be soldered on well. Everything has been good but i went to play a game that finally utilized the trigger buttons and my left one doesnt click like my right one. Naturally i freaked out and took my case apart thinking i messed something up like it appears many have broken theres off but mine is soldered strong it just doesnt really click like it should its just kinda mushy. Now its driving me insane because i barely have to touch it for it to give feedback is there a way to check the spring inside that tiny little box without breaking the solder connection. I dont want to make it worst but theres definitely something wrong inside the little box. Im not a engineer but could solder a replacement if i knew what needed to be done. @odroid

User avatar
odroid
Site Admin
Posts: 33686
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 511 times
Been thanked: 506 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by odroid » Tue Mar 03, 2020 3:40 pm

If you are willing to replace the switch with new one, the following information might be helpful.
The tact switch information. It is available in Digikey, Element14 and Mouser.
Vendor: E-Switch
Part-number: TL3340AF160QG
These users thanked the author odroid for the post:
gritshelor (Wed Mar 04, 2020 4:54 am)

gritshelor
Posts: 8
Joined: Mon Feb 24, 2020 6:04 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by gritshelor » Wed Mar 04, 2020 4:55 am

Thanks for the information! It's working but if it breaks I will order a new switch.

esprit
Posts: 32
Joined: Thu Jan 16, 2020 9:31 pm
languages_spoken: english french
ODROIDs: Odroid Go Advance
Has thanked: 6 times
Been thanked: 8 times
Contact:

Re: How to break the shoulder button and LCD in the ODROID-GO-A

Unread post by esprit » Thu Mar 12, 2020 8:06 pm

Can someone edit the title of this thread ?
I mean "How _NOT_ to break the...".
Everytimes I read that thread name in the threads list, it's frightening me...
These users thanked the author esprit for the post:
odroid (Fri Mar 13, 2020 9:26 am)

esprit
Posts: 32
Joined: Thu Jan 16, 2020 9:31 pm
languages_spoken: english french
ODROIDs: Odroid Go Advance
Has thanked: 6 times
Been thanked: 8 times
Contact:

Re: How NOT to break the shoulder button and LCD in the ODROID-GO-A

Unread post by esprit » Fri Mar 13, 2020 6:06 pm

Thank you :D

Post Reply

Return to “General Topics”

Who is online

Users browsing this forum: No registered users and 4 guests