[ROM] LineageOS-16.0 for ODROID-N2 (32/64 bit)

[Sav]

Hi, is Vulkan supported?


Inviato dal mio iPad utilizzando Tapatalk

[voodik]

Just had a further test whilst driving my car with the GPS working. There is a strange characteristic to the GPS now, which I also noticed affected the official ROM at the last update, but I changed to LineageOS-16 before having chance to report it on the forums.
On this latest release, and the latest release of the official ROM, when using TomTom Go GPS Navigation app the realtime speed display no longer appears, and the app no longer automatically switches from the overview map to turn-by-turn directions when you start driving. In the previous LineageOS-16 release (0.7) and the previous official ROM version this problem does not exist.
So, perhaps something has changed with the output of the NMEA stream? I did load up the GPS Test app to see if anything had changed (as there was an old bug where the GPS time was incorrect), but can't see anything obvious.

Many thanks,
Ben

I think i know where is problem.
Can you put this to /vendor/lib/hw/ restart and test again?
https://drive.google.com/open?id=1ZutdM ... ClytHMbPOV

[voodik]

Hi, is Vulkan supported?


Inviato dal mio iPad utilizzando Tapatalk

I think yes)

vulkan1.png (143.35 KiB) Viewed 3147 times

[benwillcox]

I think i know where is problem.
Can you put this to /vendor/lib/hw/ restart and test again?
https://drive.google.com/open?id=1ZutdM ... ClytHMbPOV

Thanks just tested and it’s fixed the problem!

On a different note, do you know if it’s possible to enable the SPDIF output? On the official ROM I understand it only works on certain versions on Kodi, but I don’t use Kodi and need all the audio to be routed through the SPDIF output like it does on the C2.

Many thanks
Ben

[Sav]

Hi,
I can't update. When I select the update package I get "Odroid Settings keeps stopping"

[voodik]

Hi,
I can't update. When I select the update package I get "Odroid Settings keeps stopping"

More details please, which version u use? You want update from internal storage?
Are you using third part file manager to select file ?

[Sav]

I installed this version:
selfinstall-odroidn2-s922_lineage-16.0_alpha-0.6_20190820.img.zip

Then I downloaded with the internal browser this update package:
updatepackage-odroidn2-userdebug-s922_9.0.0_master-20190911.zip

Then in the "odroid settengs" I choosed to update from internal storage and selected the downloaded file.
I didn't use any file manager.

Hi,
I can't update. When I select the update package I get "Odroid Settings keeps stopping"

More details please, which version u use? You want update from internal storage?
Are you using third part file manager to select file ?

[voodik]

Update!

Code: Select all

20191019 Alpha-v0.8
* Bluetooth service disabled by default(You can enable it from Odroid Settings Misc tab)
* Fixed GPS HAL initialization, now known GPS modules is plug and play (if you don't using GPS disable it from Odroid Settings Misc tab)
* Add GSF Android ID to Odroid Settings Misc tab (Now you can copy and register it via internal browser)
* Add androidvncserver (you can run it from terminal by androidvncserver -p yourpass)
* Add tvheadend startup script (First run - configure it by running tvheadend -C from terminal, then for autostart setprop persist.tvheadend.enable true)
* Fixed Wifi module 0 (RT5370N) scan issues.
* Lineage merge with upstream

P.S.

If you don't have a any USB Audio input device (Microphone etc)
Please disallow Microphone permission for all apps from Settings> Apps > App Permissions > Microphone

[Kernel]

The latest image is working great and it's been stable with Kodi.
Is it possible to disable adb over network by default without disabling ADB over USB?

I noticed it turns back on after reboot if ADB isn't fully disabled and I fear could lead to a potential security issue since Android doesn't have a default firewall application.

Also seeing as HK's AOSP image now has 64-bit would it be possible to build? (maybe reserved for your LineageOS 17 base?)
Without gapps would be amazing if possible!

[Kernel]

On a side note can anyone confirm they have this working or is it specific to HK's kernel?
https://wiki.odroid.com/odroid-n2/appli ... key_wakeup

[voodik]

On a side note can anyone confirm they have this working or is it specific to HK's kernel?
https://wiki.odroid.com/odroid-n2/appli ... key_wakeup

It using same Kernel, so should be work

[voodik]

The latest image is working great and it's been stable with Kodi.
Is it possible to disable adb over network by default without disabling ADB over USB?

I noticed it turns back on after reboot if ADB isn't fully disabled and I fear could lead to a potential security issue since Android doesn't have a default firewall application.

Also seeing as HK's AOSP image now has 64-bit would it be possible to build? (maybe reserved for your LineageOS 17 base?)
Without gapps would be amazing if possible!

edit /vendor/build.build.prop
comment this line

Code: Select all

service.adb.tcp.port=5555

HK now not recommend 64 bit build, still work on it to make it more stable.
So i move Lineage builds to 64 bit after people good feedback.

[Kernel]

It using same Kernel, so should be work

edit /vendor/build.build.prop
comment this line

Code: Select all

service.adb.tcp.port=5555

HK now not recommend 64 bit build, still work on it to make it more stable.
So i move Lineage builds to 64 bit after people good feedback.

That's great to hear, and thanks for the response!

[Sav]

With the latest version (fresh install) i got crashes of the settings app when I select Connected devices and Sound


Inviato dal mio GM1913 utilizzando Tapatalk

[voodik]

With the latest version (fresh install) i got crashes of the settings app when I select Connected devices and Sound


Inviato dal mio GM1913 utilizzando Tapatalk

Yes i see. It's crash when no Bluetooth device. I try to find solution.

BTW,
What kind device you want to find there? In my case only Bluetooth devices appears there.

[Sav]

I have a usb bluetooth dongle wich works out of the box in coreElec and HardKernel ubuntu.
Android at boot display bluetooth crash messages. I had to disconnect it, so now I don't have any bluetooth device attached.

[Sav]

As a follow up:
I tried to plug the usb dongle and to start the bluetooth service and the system became unstable, with the bluetooth error message.
Without the dongle and with the service on, I can access the sound preferences without any crash. Of course I can't access any bluetooth device.

[voodik]

As a follow up:
I tried to plug the usb dongle and to start the bluetooth service and the system became unstable, with the bluetooth error message.
Without the dongle and with the service on, I can access the sound preferences without any crash. Of course I can't access any bluetooth device.

Android Bluetooth stack only support dongles with BLE, so old ones not supported.
I will try find fixes to make Settings not crash without Bluetooth service.

[Kernel]

I will try find fixes to make Settings not crash without Bluetooth service.

It appears this is common on the official Android 64-bit (20191018) image too so it's potentially kernel specific.
At the least you can rule it down to not being specific to LineageOS or user error.
Maybe try some bipartisan efforts with HK.

It only happens when there's no dongle plugged in but I only use infrared so I just enabled airplane mode and rebooted to clear the message.

[voodik]

I will try find fixes to make Settings not crash without Bluetooth service.

It appears this is common on the official Android 64-bit (20191018) image too so it's potentially kernel specific.
At the least you can rule it down to not being specific to LineageOS or user error.
Maybe try some bipartisan efforts with HK.

It only happens when there's no dongle plugged in but I only use infrared so I just enabled airplane mode and rebooted to clear the message.

It's not Kernel specific, it's basic NPE, because Android framework is not plug and play, if we specified we have Bluetooth we need to have them, otherwise lot of NPE.
So mainly i need make some patches to not call this functions if we don't have a hardware attached.

[Kernel]

because Android framework is not plug and play, if we specified we have Bluetooth we need to have them, otherwise lot of NPE.

I forgot that Android doesn't use udev.

[bpbiszkopt]

Which Wi-Fi dongle do you recommend?
I don't really need it, but some apps don't recognize ethernet connection... Fake Wi-Fi connection works only till noughat so I have to buy something cheap.

[odroid]

I think any RT5370N chipset included cheap WLAN dongle something like this should work.
https://www.hardkernel.com/shop/wifi-module-0/

BTW, let us know which app works with the WiFi connection only?

[bpbiszkopt]

I think any RT5370N chipset included cheap WLAN dongle something like this should work.
https://www.hardkernel.com/shop/wifi-module-0/

BTW, let us know which app works with the WiFi connection only?

Thx.

My son install asphalt racing for Xbox controller and it just doesn't want to start without Wi-Fi connection.

[benwillcox]

Also TomTom Go Navigation doesn't recognise an Ethernet connection, it only works with Wi-Fi

[odroid]

Can you try Xposed framework to make a fake WiFi?
viewtopic.php?f=94&t=33297

[bpbiszkopt]

Can you try Xposed framework to make a fake WiFi?
viewtopic.php?f=94&t=33297

It do not work on pie.
Is there are possibility to add button to turn off eth connection? If i put wifi dongle it isn't working till i do not remove eth cable.
Thx

[santiagax99]

Update!

Code: Select all

20191019 Alpha-v0.8
* Bluetooth service disabled by default(You can enable it from Odroid Settings Misc tab)
* Fixed GPS HAL initialization, now known GPS modules is plug and play (if you don't using GPS disable it from Odroid Settings Misc tab)
* Add GSF Android ID to Odroid Settings Misc tab (Now you can copy and register it via internal browser)
* Add androidvncserver (you can run it from terminal by androidvncserver -p yourpass)
* Add tvheadend startup script (First run - configure it by running tvheadend -C from terminal, then for autostart setprop persist.tvheadend.enable true)
* Fixed Wifi module 0 (RT5370N) scan issues.
* Lineage merge with upstream

P.S.

If you don't have a any USB Audio input device (Microphone etc)
Please disallow Microphone permission for all apps from Settings> Apps > App Permissions > Microphone

Hi voodik, can you build LineageOS with latest fixes from HK SDK that fix blacks creen issue in this thread (viewtopic.php?f=178&t=36284) ?

[voodik]

Update!

Code: Select all

20191019 Alpha-v0.8
* Bluetooth service disabled by default(You can enable it from Odroid Settings Misc tab)
* Fixed GPS HAL initialization, now known GPS modules is plug and play (if you don't using GPS disable it from Odroid Settings Misc tab)
* Add GSF Android ID to Odroid Settings Misc tab (Now you can copy and register it via internal browser)
* Add androidvncserver (you can run it from terminal by androidvncserver -p yourpass)
* Add tvheadend startup script (First run - configure it by running tvheadend -C from terminal, then for autostart setprop persist.tvheadend.enable true)
* Fixed Wifi module 0 (RT5370N) scan issues.
* Lineage merge with upstream

P.S.

If you don't have a any USB Audio input device (Microphone etc)
Please disallow Microphone permission for all apps from Settings> Apps > App Permissions > Microphone

Hi voodik, can you build LineageOS with latest fixes from HK SDK that fix blacks creen issue in this thread (viewtopic.php?f=178&t=36284) ?

I am working on 64-bit release which based on latest BSP.

[voodik]

First 64 bit build available for tests. It based on latest Hardkernel BSP and including all my Lineage-16.0 tweaks and fixes!

Selfinstall Images with preinstalled Gapps
64 bit You can find latest version here

Selfinstall Images without preinstalled Gapps
64 bit You can find latest version here

Ejnoy!

[Sav]

First 64 bit build available for tests. It based on latest Hardkernel BSP and including all my Lineage-16.0 tweaks and fixes!

Selfinstall Images with preinstalled Gapps
64 bit You can find latest version here

Selfinstall Images without preinstalled Gapps
64 bit You can find latest version here

Ejnoy!

Thanks for your hard work Voodik.
Do you plan to release a 64 bit of Lineage 17 too?

[voodik]

First 64 bit build available for tests. It based on latest Hardkernel BSP and including all my Lineage-16.0 tweaks and fixes!

Selfinstall Images with preinstalled Gapps
64 bit You can find latest version here

Selfinstall Images without preinstalled Gapps
64 bit You can find latest version here

Ejnoy!

Thanks for your hard work Voodik.
Do you plan to release a 64 bit of Lineage 17 too?

Unfortunately 64 bit blobs don't work on Lineage-17, so for this moment only 32 bit is possible.

[benwillcox]

Thank you for this!

First issue found however: Odroid WiFi module 0 doesn’t work. There is an error: Wi-if bugreport: WiFi native failure.

Switching on WiFi it immediately switches back off.
I will use an Ethernet cable for now and test some more

Thanks
Ben

[santiagax99]

@voodik,
also have an issue with WiFi
Here is logs dump (dmesg; logcat -d; lsusb)
http://ix.io/23G1

[voodik]

Hi all, Thanks for reporting.
Here is a quick fix for wifi.
https://oph.mdrjr.net/voodik/S922X/ODRO ... supplicant
download and put it to /vendor/bin/hw/

Code: Select all

adb remount
adb push wpa_supplicant /vendor/bin/hw/
adb reboot

I will post new version at start of next week.

[santiagax99]

Hi all, Thanks for reporting.
Here is a quick fix for wifi.
https://oph.mdrjr.net/voodik/S922X/ODRO ... supplicant
download and put it to /vendor/bin/hw/

Code: Select all

adb remount
adb push wpa_supplicant /vendor/bin/hw/
adb reboot

I will post new version at start of next week.

Looks like wifi is fixed with new wpa_supplicant binary.
Here is some issues i've found
- BT not working (even can't enable it)
- USB Audio DAC volume control not working (Audio routing to USB DAC works well, but not volume control)
odroidn2:/ # cat /proc/asound/cards

Code: Select all

 0 [AMLAUGESOUND   ]: AML-AUGESOUND - AML-AUGESOUND
                      AML-AUGESOUND
 1 [Audio          ]: USB-Audio - DigiHug USB Audio
                      FiiO DigiHug USB Audio at usb-xhci-hcd.0.auto-1.2, full speed

here is logs dump
http://ix.io/23O9


Also trying to verify USB GPS work, but without success at this point

[Mumbira]

Did anyone else experience problems regarding wifi? And how did you fix it?
Neither Lineage 16, nor 17 seem to acknowledge my USB-WiFi adapter.
But the adapter works just fine with the Android version 20191205 from ODROID itself.

Also, please explain in detail I'm new into ODROID and I just got it today.

[mad_ady]

See two posts above yours

[voodik]

Hi all, Thanks for reporting.
Here is a quick fix for wifi.
https://oph.mdrjr.net/voodik/S922X/ODRO ... supplicant
download and put it to /vendor/bin/hw/

Code: Select all

adb remount
adb push wpa_supplicant /vendor/bin/hw/
adb reboot

I will post new version at start of next week.

Looks like wifi is fixed with new wpa_supplicant binary.
Here is some issues i've found
- BT not working (even can't enable it)
- USB Audio DAC volume control not working (Audio routing to USB DAC works well, but not volume control)
odroidn2:/ # cat /proc/asound/cards

Code: Select all

 0 [AMLAUGESOUND   ]: AML-AUGESOUND - AML-AUGESOUND
                      AML-AUGESOUND
 1 [Audio          ]: USB-Audio - DigiHug USB Audio
                      FiiO DigiHug USB Audio at usb-xhci-hcd.0.auto-1.2, full speed

here is logs dump
http://ix.io/23O9


Also trying to verify USB GPS work, but without success at this point

Thanks for reporting, is your BT is working on other Lineage/Official builds ?
I will check USB DAC volume issue.

[santiagax99]

Hi all, Thanks for reporting.
Here is a quick fix for wifi.
https://oph.mdrjr.net/voodik/S922X/ODRO ... supplicant
download and put it to /vendor/bin/hw/

Code: Select all

adb remount
adb push wpa_supplicant /vendor/bin/hw/
adb reboot

I will post new version at start of next week.

Looks like wifi is fixed with new wpa_supplicant binary.
Here is some issues i've found
- BT not working (even can't enable it)
- USB Audio DAC volume control not working (Audio routing to USB DAC works well, but not volume control)
odroidn2:/ # cat /proc/asound/cards

Code: Select all

 0 [AMLAUGESOUND   ]: AML-AUGESOUND - AML-AUGESOUND
                      AML-AUGESOUND
 1 [Audio          ]: USB-Audio - DigiHug USB Audio
                      FiiO DigiHug USB Audio at usb-xhci-hcd.0.auto-1.2, full speed

here is logs dump
http://ix.io/23O9


Also trying to verify USB GPS work, but without success at this point

Thanks for reporting, is your BT is working on other Lineage/Official builds ?
I will check USB DAC volume issue.

Yes, BT works on "vanilla" HK Android latest build

P.S. because that I already revert to stock and install odroid back in my car, further tests I can do only at the end of next week when another odroid board comes to me l

[Mumbira]

See two posts above yours

Oh, it must've been late... I literally read that post and didn't realize what it was about.
Nevertheless, I just tried it and sadly it doesn't work for me. Is there anything I can do to help fixing it?

Edit: Nevermind, reinstalling everything from scratch and installing the quick-fix above fixed it.

[voodik]

Hi all, Thanks for reporting.
Here is a quick fix for wifi.
https://oph.mdrjr.net/voodik/S922X/ODRO ... supplicant
download and put it to /vendor/bin/hw/

Code: Select all

adb remount
adb push wpa_supplicant /vendor/bin/hw/
adb reboot

I will post new version at start of next week.

Looks like wifi is fixed with new wpa_supplicant binary.
Here is some issues i've found
- BT not working (even can't enable it)
- USB Audio DAC volume control not working (Audio routing to USB DAC works well, but not volume control)
odroidn2:/ # cat /proc/asound/cards

Code: Select all

 0 [AMLAUGESOUND   ]: AML-AUGESOUND - AML-AUGESOUND
                      AML-AUGESOUND
 1 [Audio          ]: USB-Audio - DigiHug USB Audio
                      FiiO DigiHug USB Audio at usb-xhci-hcd.0.auto-1.2, full speed

here is logs dump
http://ix.io/23O9


Also trying to verify USB GPS work, but without success at this point

Thanks for reporting, is your BT is working on other Lineage/Official builds ?
I will check USB DAC volume issue.

Yes, BT works on "vanilla" HK Android latest build

P.S. because that I already revert to stock and install odroid back in my car, further tests I can do only at the end of next week when another odroid board comes to me l

1. About bluetooth ? You need enable it from Odroid Settings > Misc tab (Disabled by default) ten reboot. If you enabled it and still doesn't work please dump logs as described in my signature.
2. Tested with my USB Audio DAC, volume controls on Navigation bar working well.

[Cosmicbase]

Does LOS 32/64 also have root access or only LOS ATV?

[voodik]

Does LOS 32/64 also have root access or only LOS ATV?

You can enable root access from Developer Options.

[Cosmicbase]

Does LOS 32/64 also have root access or only LOS ATV?

You can enable root access from Developer Options.

Thanks it helps.

[benwillcox]

Been testing for a couple of days and on the whole seems pretty good (the wifi fix worked).

However today on two occasions my GPS and wifi suddenly stopped working. The wifi connection icon disappeared from the status bar, and the GPSTest app showed no satellites at all.
Switching GPS off and on through the Odroid Settings had no effect. Only a reboot was able to fix it.

Anyone else seen this?

Ben

[voodik]

Been testing for a couple of days and on the whole seems pretty good (the wifi fix worked).

However today on two occasions my GPS and wifi suddenly stopped working. The wifi connection icon disappeared from the status bar, and the GPSTest app showed no satellites at all.
Switching GPS off and on through the Odroid Settings had no effect. Only a reboot was able to fix it.

Anyone else seen this?

Ben

I think its some USB related problem. In latest BSP USB hub reset property is added. I will add them to next build, so when problem occurs you must try reset USB hub first.

Thanks

[benwillcox]

Thanks for the reply. It seems to happen with varying frequency, this morning it happened 5 times within 20 minutes, then after the 5th reboot it stayed ok for half an hour or so before failing again. So it is a significant issue.

Isn't the USB hub reset just a bit of a last resort in case of malfunctioning USB device to save unplugging/plugging back in? The previous Lineage build didn't have this dropout problem so I don't think it's anything to do with my USB devices, everything seemed very stable on the last version.

Thanks,
Ben

[voodik]

Thanks for the reply. It seems to happen with varying frequency, this morning it happened 5 times within 20 minutes, then after the 5th reboot it stayed ok for half an hour or so before failing again. So it is a significant issue.

Isn't the USB hub reset just a bit of a last resort in case of malfunctioning USB device to save unplugging/plugging back in? The previous Lineage build didn't have this dropout problem so I don't think it's anything to do with my USB devices, everything seemed very stable on the last version.

Thanks,
Ben

Check logs, dmesg would be enough to understand is it USB related problem.

[santiagax99]

1. About bluetooth ? You need enable it from Odroid Settings > Misc tab (Disabled by default) ten reboot. If you enabled it and still doesn't work please dump logs as described in my signature.
2. Tested with my USB Audio DAC, volume controls on Navigation bar working well.

Hi! got my second N2 board. Yes, bluetooth works fine (last time i'm only enable sink profile but forget about disable "Disable BT") and i successfully connected to it by my phone and play music through N2.

About USB DAC - can't check it again right now (DAC is installed in car right now)

Have a question about BT sink profile - is it only for media playing? Can i use Odroid as BT hands-free headset to pass calls from my phone to it ?