seeking issues - Core 9.2.0 - Megusta x265 encodes only

Post Reply
apeg
Posts: 68
Joined: Sat May 09, 2015 10:41 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 2 times
Contact:

seeking issues - Core 9.2.0 - Megusta x265 encodes only

Unread post by apeg » Sun Nov 24, 2019 5:31 am

Never had any issues with Libreelec, I know there are major changes under the hood, just wondering if there is anything I can do to jerry-rig the Core build as I've used Megusta encode settings for my home movies over the years

All other content I have tested works great, encluding other x265 encodes. It seems to be specific to the encode settings I've used, which implies its not Core's issue.

If i seek in any direction for any amount of time and the video freezes for about 30 seconds, then audio kicks in followed by video about 5 seconds later. Not broken, but very non-user-friendly.

"Enable HEVC seek workaround" has no effect on the problem:

Thanks,
Last edited by apeg on Mon Nov 25, 2019 2:17 am, edited 3 times in total.

apeg
Posts: 68
Joined: Sat May 09, 2015 10:41 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 2 times
Contact:

Re: seeking issues - Core 9.2.0 - Megusta x265 encodes only

Unread post by apeg » Sun Nov 24, 2019 1:00 pm

I cranked up the logging and get reams the following

2019-11-23 22:53:58.101 T:3406558080 ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
2019-11-23 22:53:58.139 T:4067967872 WARNING: ActiveAE - large audio sync error: 591405.900915
2019-11-23 22:53:58.145 T:3517666176 DEBUG: CAMLCodec::GetPicture: VC_BUFFER LEV:0.00 ttd:-9223372036869054ms x:100.000 <null>
2019-11-23 22:53:58.200 T:3517666176 DEBUG: CAMLCodec::GetPicture: VC_BUFFER LEV:0.00 ttd:-9223372036869112ms x:100.000 <null>
2019-11-23 22:53:58.225 T:4067967872 WARNING: ActiveAE - large audio sync error: 591320.683333


Audio sync issues with these encode specifically? Was Libreelec correcting this?

apeg
Posts: 68
Joined: Sat May 09, 2015 10:41 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 2 times
Contact:

Re: seeking issues - Core 9.2.0 - Megusta x265 encodes only

Unread post by apeg » Mon Nov 25, 2019 1:00 pm

found the problem (at least for me)

Settings > System > CoreELEC > Enable GPU overclock <- needed to turn mine off

Everything is seeking perfectly now.
These users thanked the author apeg for the post (total 2):
rooted (Mon Nov 25, 2019 3:41 pm) • odroid (Mon Nov 25, 2019 7:07 pm)

Post Reply

Return to “CoreELEC/LibreELEC - Kodi Project for C1/C2”

Who is online

Users browsing this forum: No registered users and 2 guests