Pressure Transducer Voltage Reading

Post Reply
bec
Posts: 1
Joined: Thu Oct 10, 2019 10:58 pm
languages_spoken: english
ODROIDs: XU4, C1+
Has thanked: 0
Been thanked: 0
Contact:

Pressure Transducer Voltage Reading

Post by bec »

I have a pressure transducer hooked to my C1 board. Max output voltage of 1.8v when I read the voltage with a volt meter it reads .5v but this is what the odroid c1 is reading. The voltage is reading all over the place.
I tried to put a resistor in to ground and 1.8v.
Any ideas thank you!!

["Analog Input 0" <AIN0>] value is: 1022 (1.8 VDC)
["Analog Input 0" <AIN0>] value is: 1016 (1.8 VDC)
["Analog Input 0" <AIN0>] value is: 1022 (1.8 VDC)
["Analog Input 1" <AIN1>] value is: 295 (0.5 VDC)
["Analog Input 1" <AIN1>] value is: 0 (0.0 VDC)
["Analog Input 0" <AIN0>] value is: 736 (1.3 VDC)
["Analog Input 1" <AIN1>] value is: 90 (0.2 VDC)
["Analog Input 0" <AIN0>] value is: 348 (0.6 VDC)
["Analog Input 1" <AIN1>] value is: 10 (0.0 VDC)
["Analog Input 0" <AIN0>] value is: 13 (0.0 VDC)
["Analog Input 1" <AIN1>] value is: 167 (0.3 VDC)
["Analog Input 0" <AIN0>] value is: 0 (0.0 VDC)
["Analog Input 1" <AIN1>] value is: 79 (0.1 VDC)
["Analog Input 1" <AIN1>] value is: 0 (0.0 VDC)
["Analog Input 1" <AIN1>] value is: 83 (0.1 VDC)
["Analog Input 1" <AIN1>] value is: 110 (0.2 VDC)
["Analog Input 1" <AIN1>] value is: 521 (0.9 VDC)
["Analog Input 1" <AIN1>] value is: 1023 (1.8 VDC)
["Analog Input 1" <AIN1>] value is: 194 (0.3 VDC)
["Analog Input 1" <AIN1>] value is: 964 (1.7 VDC)
["Analog Input 1" <AIN1>] value is: 0 (0.0 VDC)
["Analog Input 0" <AIN0>] value is: 152 (0.3 VDC)
["Analog Input 0" <AIN0>] value is: 172 (0.3 VDC)
["Analog Input 0" <AIN0>] value is: 389 (0.7 VDC)
["Analog Input 0" <AIN0>] value is: 166 (0.3 VDC)
["Analog Input 0" <AIN0>] value is: 0 (0.0 VDC)
["Analog Input 0" <AIN0>] value is: 16 (0.0 VDC)
["Analog Input 1" <AIN1>] value is: 946 (1.7 VDC)
["Analog Input 0" <AIN0>] value is: 0 (0.0 VDC)
["Analog Input 1" <AIN1>] value is: 0 (0.0 VDC)
["Analog Input 0" <AIN0>] value is: 30 (0.1 VDC)
["Analog Input 0" <AIN0>] value is: 202 (0.4 VDC)
["Analog Input 0" <AIN0>] value is: 588 (1.0 VDC)
["Analog Input 0" <AIN0>] value is: 1023 (1.8 VDC)
["Analog Input 1" <AIN1>] value is: 84 (0.1 VDC)
["Analog Input 1" <AIN1>] value is: 0 (0.0 VDC)
["Analog Input 1" <AIN1>] value is: 1016 (1.8 VDC)

User avatar
odroid
Site Admin
Posts: 35852
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 1305 times
Been thanked: 908 times
Contact:

Re: Pressure Transducer Voltage Reading

Post by odroid »

Do you have a variable resistor or volume to test the ADC inputs stability first?

Also check the pressure transducer output current.

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 0 guests