M3 distans screw

Post Reply
User avatar
Mullcom
Posts: 116
Joined: Sun Jun 30, 2019 1:41 am
languages_spoken: english
Has thanked: 64 times
Been thanked: 6 times
Contact:

M3 distans screw

Unread post by Mullcom » Sat Aug 10, 2019 6:31 pm

I try to finding this types. Different lengths. Really hard to finding. This is needed to building a good build with this badboy.
Image

Skickat från min SM-G955F via Tapatalk

misaz
Posts: 7
Joined: Sat Jul 27, 2019 3:58 am
languages_spoken: english, czech
ODROIDs: currently none
Has thanked: 1 time
Been thanked: 3 times
Contact:

Re: M3 distans screw

Unread post by misaz » Sat Aug 10, 2019 6:53 pm

These users thanked the author misaz for the post:
Mullcom (Sat Aug 10, 2019 7:58 pm)

User avatar
Mullcom
Posts: 116
Joined: Sun Jun 30, 2019 1:41 am
languages_spoken: english
Has thanked: 64 times
Been thanked: 6 times
Contact:

Re: M3 distans screw

Unread post by Mullcom » Sat Aug 10, 2019 7:29 pm

Thx for the link. But i have never buy from Aliexpress before. I try eBay se if i cam finding some there. I have try to find any seller in Sweden but can't find any seller that selling in a big set.

One more question
Witch type of material is the best to use?

Question :: Nylon or zink or metal? Best of use?
answer ::

Question :: Is it m3 or m2 on H2?
answer :: is in om this page


Skickat från min SM-G955F via Tapatalk







misaz
Posts: 7
Joined: Sat Jul 27, 2019 3:58 am
languages_spoken: english, czech
ODROIDs: currently none
Has thanked: 1 time
Been thanked: 3 times
Contact:

Re: M3 distans screw

Unread post by misaz » Sun Aug 11, 2019 3:48 am

These users thanked the author misaz for the post:
Mullcom (Mon Aug 12, 2019 5:07 pm)

User avatar
odroid
Site Admin
Posts: 32508
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 181 times
Been thanked: 349 times
Contact:

Re: M3 distans screw

Unread post by odroid » Mon Aug 12, 2019 9:42 am

Question :: Nylon or zink or metal? Best of use?
We've used Zink screws. But Nylon must be fine too.
These users thanked the author odroid for the post:
Mullcom (Mon Aug 12, 2019 5:07 pm)

User avatar
Mullcom
Posts: 116
Joined: Sun Jun 30, 2019 1:41 am
languages_spoken: english
Has thanked: 64 times
Been thanked: 6 times
Contact:

Re: M3 distans screw

Unread post by Mullcom » Mon Aug 12, 2019 5:17 pm

odroid wrote:Question :: Nylon or zink or metal? Best of use?
We've used Zink screws. But Nylon must be fine too.
I thinking about electricity between that you screws between. Electric can't travel in nylon. So cards going to have different charge. Old times this was really critical. I think this is better this days but don't now how much.

Finally I did finding hex m3 distans om ebay.
Now I need to wait for it too arrive ;(



Skickat från min SM-G955F via Tapatalk


Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 0 guests