Ubuntu support for MIDI/USB musical keyboard

Post Reply
ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Mon Jul 08, 2019 6:14 pm

HI, with Ubuntu, I tried to connect my M-Audio Axiom 25 midi keyboard (USB) but it is not recognized and managed. is it a kernel problem?

should I wait for the new kernel version? when will it be released?

PS. I tried Armbian but it seems very slow as OS in general

User avatar
mad_ady
Posts: 6680
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, N1, H2, N2
Location: Bucharest, Romania
Has thanked: 194 times
Been thanked: 148 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by mad_ady » Mon Jul 08, 2019 6:52 pm

Try it on a Ubuntu intel PC and if it's recognized, post the output of lsusb -t. Try the same command on your odroid as well.
These users thanked the author mad_ady for the post:
ManuelFantoni (Tue Jul 09, 2019 6:16 pm)

User avatar
odroid
Site Admin
Posts: 32368
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 147 times
Been thanked: 325 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by odroid » Tue Jul 09, 2019 10:49 am

We ordered a USB MIDI keyboard and I hope we can fix the driver issue within a couple of weeks.
These users thanked the author odroid for the post:
ManuelFantoni (Tue Jul 09, 2019 6:16 pm)

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Tue Jul 09, 2019 6:18 pm

mad_ady wrote:
Mon Jul 08, 2019 6:52 pm
Try it on a Ubuntu intel PC and if it's recognized, post the output of lsusb -t. Try the same command on your odroid as well.

Thanks mad_ady, I'll try and tell you tonight.

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Tue Jul 09, 2019 6:19 pm

odroid wrote:
Tue Jul 09, 2019 10:49 am
We ordered a USB MIDI keyboard and I hope we can fix the driver issue within a couple of weeks.
Thanks odroid for the valuable support

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Wed Jul 10, 2019 9:12 am

ManuelFantoni wrote:
Tue Jul 09, 2019 6:18 pm
mad_ady wrote:
Mon Jul 08, 2019 6:52 pm
Try it on a Ubuntu intel PC and if it's recognized, post the output of lsusb -t. Try the same command on your odroid as well.

Thanks mad_ady, I'll try and tell you tonight.
I tried my MIDI / USB devices on PC (netbook where it works) and on Odroid (where it doesn't work), these are the results:

PC - Without MIDIUSB

manuel@manuel-AOD255:~$ lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M

Odroid - Without MIDIUSB

odroid@odroid:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=rtl8xxxu, 480M
|__ Port 3: Dev 4, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M

PC - Fishman Tripleplay

manuel@manuel-AOD255:~$ lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 4, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 4, If 1, Class=Audio, Driver=snd-usb-audio, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M


Odroid - Fishman Tripleplay

odroid@odroid:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 11, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 11, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=rtl8xxxu, 480M
|__ Port 3: Dev 4, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M

PC - Novation Impulse 61

manuel@manuel-AOD255:~$ lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 3, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 3, If 1, Class=Audio, Driver=snd-usb-audio, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M

Odroid - Novation Impulse 61

odroid@odroid:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 10, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 10, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=rtl8xxxu, 480M
|__ Port 3: Dev 4, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M


PC - M-Audio Axiom 25 2nd gen

manuel@manuel-AOD255:~$ lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 2, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 2, If 3, Class=Vendor Specific Class, Driver=, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 4: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M

Odroid - M-Audio Axiom 25 2nd gen

odroid@odroid:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 9, If 3, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 9, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 1: Dev 9, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 9, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=rtl8xxxu, 480M
|__ Port 3: Dev 4, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 4, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M

Thanks

User avatar
mad_ady
Posts: 6680
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, N1, H2, N2
Location: Bucharest, Romania
Has thanked: 194 times
Been thanked: 148 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by mad_ady » Wed Jul 10, 2019 1:04 pm

I see it registers as a sound device, not as a keyboard as I initially thought.
Could you also run dmesg -w on your PC and paste the output that you get after plugging in the keyboards?
Most likely the odroid kernel is missing some modules - or alsa/pulseaudio need tweaking
These users thanked the author mad_ady for the post:
ManuelFantoni (Wed Jul 10, 2019 6:31 pm)

User avatar
tobetter
Posts: 4043
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: X, X2, U2, U3, XU3, C1
Location: Paju, South Korea
Has thanked: 43 times
Been thanked: 189 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by tobetter » Wed Jul 10, 2019 1:08 pm

There seems a driver issue and the patch is ready, when the kernel package is built you would be able to update and can test if it works. The kernel update would be announced later when it's ready and tested.
These users thanked the author tobetter for the post:
ManuelFantoni (Wed Jul 10, 2019 6:31 pm)

User avatar
odroid
Site Admin
Posts: 32368
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 147 times
Been thanked: 325 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by odroid » Thu Jul 11, 2019 10:29 am

Updated the system.
Other user has confirmed the MIDI input device worked with the Kernel 4.9.184-3 update.
viewtopic.php?f=177&t=35212&p=261951#p261951
These users thanked the author odroid for the post:
ManuelFantoni (Thu Jul 11, 2019 5:22 pm)

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Thu Jul 11, 2019 5:39 pm

mad_ady wrote:
Wed Jul 10, 2019 1:04 pm
I see it registers as a sound device, not as a keyboard as I initially thought.
Could you also run dmesg -w on your PC and paste the output that you get after plugging in the keyboards?
Most likely the odroid kernel is missing some modules - or alsa/pulseaudio need tweaking
With Novation Impulse 61

Code: Select all

manuel@manuel-AOD255:~$ dmesg -w
[    0.000000] Linux version 4.15.0-50-lowlatency (buildd@lgw01-amd64-036) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #54-Ubuntu SMP PREEMPT Mon May 6 19:32:13 UTC 2019 (Ubuntu 4.15.0-50.54-lowlatency 4.15.18)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f493fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f494000-0x000000003f4befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f4bf000-0x000000003f576fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f577000-0x000000003f5befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f5ebfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f5ec000-0x000000003f5fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5ff000-0x000000003f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f600000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer AOD255/JE02_PT, BIOS V3.10(DDR3) 11/17/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-through
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x1b3fffff]
[    0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[    0.000000] BRK [0x1afdc000, 0x1afdcfff] PGTABLE
[    0.000000] BRK [0x1afdd000, 0x1afddfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33c19000-0x35e03fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000003F5FE120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000003F5FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 0x000000003F5F1000 008DCF (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 0x000000003F584000 000040
[    0.000000] ACPI: FACS 0x000000003F584000 000040
[    0.000000] ACPI: HPET 0x000000003F5FC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 0x000000003F5FB000 000078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 0x000000003F5FA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 0x000000003F5F0000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 0x000000003F5EF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 0x000000003F5ED000 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 0x000000003F5EC000 000194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 128MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] BRK [0x1afde000, 0x1afdefff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
[    0.000000]   HighMem  [mem 0x00000000375fe000-0x000000003f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003f493fff]
[    0.000000]   node   0: [mem 0x000000003f4bf000-0x000000003f576fff]
[    0.000000]   node   0: [mem 0x000000003f5bf000-0x000000003f5ebfff]
[    0.000000]   node   0: [mem 0x000000003f5ff000-0x000000003f5fffff]
[    0.000000] Reserved but unavailable: 2792 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f5fffff]
[    0.000000] On node 0 totalpages: 259352
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2175 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 32636 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x000000003f800000-0x000000003fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x81/0x43f with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93324 r0 d29556 u122880
[    0.000000] pcpu-alloc: s93324 r0 d29556 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 257137
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-lowlatency root=UUID=96c91724-f188-4146-93df-f18f6a3ae7c5 ro quiet splash vt.handoff=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0003f600)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 974836K/1037408K available (8922K kernel code, 893K rwdata, 3484K rodata, 1064K init, 860K bss, 62572K reserved, 0K cma-reserved, 130544K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                   vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                     .init : 0xdad17000 - 0xdae21000   (1064 kB)
                     .data : 0xda8b6b98 - 0xdad03500   (4402 kB)
                     .text : 0xda000000 - 0xda8b6b98   (8922 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 37929 entries in 75 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 1496.313 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.62 BogoMIPS (lpj=1496313)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] Yama: becoming mindful.
[    0.006000] AppArmor: AppArmor initialized
[    0.006000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007140] Disabled fast string operations
[    0.007161] mce: CPU supports 5 MCE banks
[    0.007173] CPU0: Thermal monitoring enabled (TM2)
[    0.007179] process: using mwait in idle threads
[    0.007192] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.007196] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.007632] Freeing SMP alternatives memory: 32K
[    0.010000] smpboot: CPU0: Intel(R) Atom(TM) CPU N550   @ 1.50GHz (family: 0x6, model: 0x1c, stepping: 0xa)
[    0.013030] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.013061] ... version:                3
[    0.013063] ... bit width:              40
[    0.013065] ... generic registers:      2
[    0.013068] ... value mask:             000000ffffffffff
[    0.013071] ... max period:             000000007fffffff
[    0.013073] ... fixed-purpose events:   3
[    0.013075] ... event mask:             0000000700000003
[    0.014025] Hierarchical SRCU implementation.
[    0.017377] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.018058] smp: Bringing up secondary CPUs ...
[    0.024067] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.024072] x86: Booting SMP configuration:
[    0.024075] .... node  #0, CPUs:      #1
[    0.001000] Initializing CPU#1
[    0.001000] Disabled fast string operations
[    0.034075] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.034081]  #2
[    0.001000] Initializing CPU#2
[    0.001000] Disabled fast string operations
[    0.045058] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.045063]  #3
[    0.001000] Initializing CPU#3
[    0.001000] Disabled fast string operations
[    0.049000] TSC synchronization [CPU#0 -> CPU#3]:
[    0.049000] Measured 45 cycles TSC warp between CPUs, turning off TSC clock.
[    0.049000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.050016] smp: Brought up 1 node, 4 CPUs
[    0.050016] smpboot: Max logical packages: 1
[    0.050018] smpboot: Total of 4 processors activated (11970.50 BogoMIPS)
[    0.052289] devtmpfs: initialized
[    0.053096] evm: security.selinux
[    0.053099] evm: security.SMACK64
[    0.053101] evm: security.SMACK64EXEC
[    0.053103] evm: security.SMACK64TRANSMUTE
[    0.053105] evm: security.SMACK64MMAP
[    0.053107] evm: security.apparmor
[    0.053109] evm: security.ima
[    0.053111] evm: security.capability
[    0.053170] PM: Registering ACPI NVS region [mem 0x3f577000-0x3f5befff] (294912 bytes)
[    0.053382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.053382] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.053382] pinctrl core: initialized pinctrl subsystem
[    0.054317] RTC time: 23:16:52, date: 07/10/19
[    0.054630] NET: Registered protocol family 16
[    0.055058] audit: initializing netlink subsys (disabled)
[    0.055085] audit: type=2000 audit(1562800612.055:1): state=initialized audit_enabled=0 res=1
[    0.055524] EISA bus registered
[    0.055564] cpuidle: using governor ladder
[    0.056031] cpuidle: using governor menu
[    0.056194] Simple Boot Flag at 0x44 set to 0x1
[    0.056233] ACPI: bus type PCI registered
[    0.056238] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.056415] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.057028] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.057028] PCI: Using MMCONFIG for extended config space
[    0.057029] PCI: Using configuration type 1 for base access
[    0.057070] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.057073] mtrr: probably your BIOS does not setup all CPUs.
[    0.057075] mtrr: corrected configuration.
[    0.064036] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.065027] ACPI: Added _OSI(Module Device)
[    0.065027] ACPI: Added _OSI(Processor Device)
[    0.065027] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.065027] ACPI: Added _OSI(Processor Aggregator Device)
[    0.065027] ACPI: Added _OSI(Linux-Dell-Video)
[    0.065027] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.065027] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.065250] ACPI: Executed 1 blocks of module-level executable AML code
[    0.074552] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.075844] ACPI: Dynamic OEM Table Load:
[    0.075867] ACPI: SSDT 0x00000000F3842800 0006C6 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.077239] ACPI: Dynamic OEM Table Load:
[    0.077260] ACPI: SSDT 0x00000000F3847000 000646 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.078918] ACPI: Dynamic OEM Table Load:
[    0.078935] ACPI: SSDT 0x00000000F3839E00 00015F (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.079624] ACPI: Dynamic OEM Table Load:
[    0.079639] ACPI: SSDT 0x00000000F674C900 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.082326] ACPI: EC: EC started
[    0.082329] ACPI: EC: interrupt blocked
[    0.084902] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.084910] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.084915] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.084917] ACPI: Interpreter enabled
[    0.084980] ACPI: (supports S0 S3 S4 S5)
[    0.084984] ACPI: Using IOAPIC for interrupt routing
[    0.085112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.085761] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.173084] ACPI: Power Resource [FN00] (on)
[    0.175697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.175713] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.176165] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.176577] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.178099] PCI host bridge to bus 0000:00
[    0.178108] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.178114] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.178120] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.178125] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[    0.178131] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.178154] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.178437] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.178457] pci 0000:00:02.0: reg 0x10: [mem 0x58180000-0x581fffff]
[    0.178470] pci 0000:00:02.0: reg 0x14: [io  0x60c0-0x60c7]
[    0.178484] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.178498] pci 0000:00:02.0: reg 0x1c: [mem 0x58000000-0x580fffff]
[    0.178759] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.178777] pci 0000:00:02.1: reg 0x10: [mem 0x58100000-0x5817ffff]
[    0.179102] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.179149] pci 0000:00:1b.0: reg 0x10: [mem 0x58200000-0x58203fff 64bit]
[    0.179299] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.179581] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.179744] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.180039] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.180201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.180483] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.180565] pci 0000:00:1d.0: reg 0x20: [io  0x6080-0x609f]
[    0.180844] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.180925] pci 0000:00:1d.1: reg 0x20: [io  0x6060-0x607f]
[    0.181229] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.181309] pci 0000:00:1d.2: reg 0x20: [io  0x6040-0x605f]
[    0.181600] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.181680] pci 0000:00:1d.3: reg 0x20: [io  0x6020-0x603f]
[    0.181969] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.182030] pci 0000:00:1d.7: reg 0x10: [mem 0x58204400-0x582047ff]
[    0.182164] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.182405] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.182732] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.183139] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.183176] pci 0000:00:1f.2: reg 0x10: [io  0x60b8-0x60bf]
[    0.183193] pci 0000:00:1f.2: reg 0x14: [io  0x60cc-0x60cf]
[    0.183210] pci 0000:00:1f.2: reg 0x18: [io  0x60b0-0x60b7]
[    0.183226] pci 0000:00:1f.2: reg 0x1c: [io  0x60c8-0x60cb]
[    0.183243] pci 0000:00:1f.2: reg 0x20: [io  0x60a0-0x60af]
[    0.183260] pci 0000:00:1f.2: reg 0x24: [mem 0x58204000-0x582043ff]
[    0.183336] pci 0000:00:1f.2: PME# supported from D3hot
[    0.183593] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.183673] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.184146] pci 0000:01:00.0: [1969:2060] type 00 class 0x020000
[    0.184206] pci 0000:01:00.0: reg 0x10: [mem 0x57000000-0x5703ffff 64bit]
[    0.184227] pci 0000:01:00.0: reg 0x18: [io  0x5000-0x507f]
[    0.184413] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188038] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.188048] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.188057] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.188069] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.188285] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.188346] pci 0000:02:00.0: reg 0x10: [mem 0x56000000-0x5600ffff 64bit]
[    0.189132] pci 0000:02:00.0: supports D1
[    0.189137] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.192039] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.192049] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.192057] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.192069] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.192219] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.192240] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.192246] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.192252] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.192257] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff window] (subtractive decode)
[    0.192291] pci_bus 0000:00: on NUMA node 0
[    0.257394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.257394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.257394] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.257604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.257829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.258095] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.258325] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.258568] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.260441] ACPI: EC: interrupt unblocked
[    0.260459] ACPI: EC: event unblocked
[    0.260477] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.260486] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.261563] SCSI subsystem initialized
[    0.262068] libata version 3.00 loaded.
[    0.262132] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.262132] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.262132] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.262132] vgaarb: loaded
[    0.262178] ACPI: bus type USB registered
[    0.262252] usbcore: registered new interface driver usbfs
[    0.262286] usbcore: registered new interface driver hub
[    0.262374] usbcore: registered new device driver usb
[    0.263066] EDAC MC: Ver: 3.0.0
[    0.263323] PCI: Using ACPI for IRQ routing
[    0.273725] PCI: pci_cache_line_size set to 64 bytes
[    0.273815] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.273820] e820: reserve RAM buffer [mem 0x3f494000-0x3fffffff]
[    0.273825] e820: reserve RAM buffer [mem 0x3f577000-0x3fffffff]
[    0.273829] e820: reserve RAM buffer [mem 0x3f5ec000-0x3fffffff]
[    0.273833] e820: reserve RAM buffer [mem 0x3f600000-0x3fffffff]
[    0.274212] NetLabel: Initializing
[    0.274216] NetLabel:  domain hash size = 128
[    0.274218] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.274264] NetLabel:  unlabeled traffic allowed by default
[    0.277415] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.277427] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.277439] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.283070] clocksource: Switched to clocksource hpet
[    0.329624] VFS: Disk quotas dquot_6.6.0
[    0.329682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.330071] AppArmor: AppArmor Filesystem Enabled
[    0.330177] pnp: PnP ACPI init
[    0.394683] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.394693] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.394699] system 00:00: [io  0x0610] has been reserved
[    0.394705] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.394711] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.394717] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.394723] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.394730] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.394738] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.394745] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.394751] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.394758] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.394764] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.394771] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.394777] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.394799] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.394949] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.395263] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.395469] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.395839] pnp: PnP ACPI: found 4 devices
[    0.395847] PnPBIOS: Disabled by ACPI PNP
[    0.439485] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.439559] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.439567] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.439578] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.439587] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.439600] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.439606] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.439616] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.439625] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.439637] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.439660] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.439666] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.439672] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439677] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]
[    0.439682] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.439688] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
[    0.439693] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.439699] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.439704] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
[    0.439709] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.439715] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.439721] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.439726] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439731] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff window]
[    0.440060] NET: Registered protocol family 2
[    0.440548] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.440608] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.440669] TCP: Hash tables configured (established 8192 bind 8192)
[    0.440757] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.440776] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.440922] NET: Registered protocol family 1
[    0.440966] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.444315] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.444329] PCI: CLS 64 bytes, default 64
[    0.444489] Unpacking initramfs...
[    2.126455] Freeing initrd memory: 34732K
[    2.126682] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159187ac396, max_idle_ns: 440795266593 ns
[    2.127084] Scanning for low memory corruption every 60 seconds
[    2.129075] Initialise system trusted keyrings
[    2.129102] Key type blacklist registered
[    2.129276] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    2.134346] zbud: loaded
[    2.135679] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.136398] fuse init (API version 7.26)
[    2.143258] Key type asymmetric registered
[    2.143263] Asymmetric key parser 'x509' registered
[    2.143304] bounce: pool size: 64 pages
[    2.143356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.143504] io scheduler noop registered
[    2.143507] io scheduler deadline registered
[    2.143707] io scheduler cfq registered (default)
[    2.145858] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.146096] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    2.146413] vesafb: mode is 800x600x32, linelength=3200, pages=0
[    2.146417] vesafb: scrolling: redraw
[    2.146422] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.146468] vesafb: framebuffer at 0x40000000, mapped to 0x(ptrval), using 1920k, total 1920k
[    2.146832] Console: switching to colour frame buffer device 100x37
[    2.146874] fb0: VESA VGA frame buffer device
[    2.146941] intel_idle: MWAIT substates: 0x20220
[    2.146945] intel_idle: v0.4.1 model 0x1C
[    2.147526] intel_idle: lapic_timer_reliable_states 0x2
[    2.211623] ACPI: AC Adapter [AC] (off-line)
[    2.211740] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.211924] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.211963] ACPI: Power Button [PWRB]
[    2.212225] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.212264] ACPI: Sleep Button [SLPB]
[    2.212371] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.212525] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    2.212560] ACPI: Lid Switch [LID0]
[    2.212799] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.212880] ACPI: Power Button [PWRF]
[    2.216401] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.216999] thermal LNXTHERM:00: registered as thermal_zone0
[    2.217056] ACPI: Thermal Zone [THRM] (29 C)
[    2.217486] isapnp: Scanning for PnP cards...
[    2.217727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.286815] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.287377] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.350724] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.351281] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.414507] random: fast init done
[    2.530826] isapnp: No Plug & Play device found
[    2.892477] ACPI: Battery Slot [BAT0] (battery present)
[    2.893053] Linux agpgart interface v0.103
[    2.900258] loop: module loaded
[    2.901083] libphy: Fixed MDIO Bus: probed
[    2.901088] tun: Universal TUN/TAP device driver, 1.6
[    2.901271] PPP generic driver version 2.4.2
[    2.901450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.901462] ehci-pci: EHCI PCI platform driver
[    2.901919] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.901938] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.901964] ehci-pci 0000:00:1d.7: debug port 1
[    2.905983] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.906199] ehci-pci 0000:00:1d.7: irq 22, io mem 0x58204400
[    2.913163] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.913341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.913347] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.913352] usb usb1: Product: EHCI Host Controller
[    2.913357] usb usb1: Manufacturer: Linux 4.15.0-50-lowlatency ehci_hcd
[    2.913361] usb usb1: SerialNumber: 0000:00:1d.7
[    2.913798] hub 1-0:1.0: USB hub found
[    2.913825] hub 1-0:1.0: 8 ports detected
[    2.914893] ehci-platform: EHCI generic platform driver
[    2.914947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.914963] ohci-pci: OHCI PCI platform driver
[    2.915065] ohci-platform: OHCI generic platform driver
[    2.915106] uhci_hcd: USB Universal Host Controller Interface driver
[    2.915525] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.915542] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.915558] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.915815] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
[    2.916082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.916089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.916095] usb usb2: Product: UHCI Host Controller
[    2.916099] usb usb2: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.916104] usb usb2: SerialNumber: 0000:00:1d.0
[    2.916505] hub 2-0:1.0: USB hub found
[    2.916532] hub 2-0:1.0: 2 ports detected
[    2.917334] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.917351] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.917377] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.917579] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
[    2.917780] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.917786] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.917790] usb usb3: Product: UHCI Host Controller
[    2.917795] usb usb3: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.917799] usb usb3: SerialNumber: 0000:00:1d.1
[    2.918255] hub 3-0:1.0: USB hub found
[    2.918284] hub 3-0:1.0: 2 ports detected
[    2.919072] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.919096] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.919113] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.919315] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[    2.919527] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.919533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.919538] usb usb4: Product: UHCI Host Controller
[    2.919542] usb usb4: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.919547] usb usb4: SerialNumber: 0000:00:1d.2
[    2.919972] hub 4-0:1.0: USB hub found
[    2.919999] hub 4-0:1.0: 2 ports detected
[    2.920809] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.920827] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.920842] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.921087] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
[    2.921286] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.921292] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.921297] usb usb5: Product: UHCI Host Controller
[    2.921302] usb usb5: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.921306] usb usb5: SerialNumber: 0000:00:1d.3
[    2.921719] hub 5-0:1.0: USB hub found
[    2.921747] hub 5-0:1.0: 2 ports detected
[    2.922448] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.936501] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.936643] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.937147] mousedev: PS/2 mouse device common for all mice
[    2.937903] rtc_cmos 00:01: RTC can wake from S4
[    2.938210] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.938399] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.938436] i2c /dev entries driver
[    2.938460] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    2.938815] device-mapper: uevent: version 1.0.3
[    2.939143] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.939227] platform eisa.0: Probing EISA bus 0
[    2.939234] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.939241] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.939247] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.939252] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.939258] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.939264] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.939269] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.939275] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.939281] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.939285] platform eisa.0: EISA: Detected 0 cards
[    2.939297] cpufreq_nforce2: No nForce2 chipset
[    2.939493] ledtrig-cpu: registered to indicate activity on CPUs
[    2.940333] NET: Registered protocol family 10
[    2.951886] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.962428] Segment Routing with IPv6
[    2.962501] NET: Registered protocol family 17
[    2.962655] Key type dns_resolver registered
[    2.963800] microcode: sig=0x106ca, pf=0x10, revision=0x107
[    2.964060] microcode: Microcode Update Driver: v2.2.
[    2.964071] Using IPI No-Shortcut mode
[    2.964611] registered taskstats version 1
[    2.964640] Loading compiled-in X.509 certificates
[    2.987899] Loaded X.509 cert 'Build time autogenerated kernel key: f03cce9a429370e7ce67161f8f7e7b60539527c4'
[    2.987980] zswap: loaded using pool lzo/zbud
[    3.011968] Key type big_key registered
[    3.011984] Key type trusted registered
[    3.020325] Key type encrypted registered
[    3.020338] AppArmor: AppArmor sha1 policy hashing enabled
[    3.020346] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.020365] ima: Allocated hash algorithm: sha1
[    3.020408] evm: HMAC attrs: 0x1
[    3.020960]   Magic number: 11:916:301
[    3.021099] tty tty30: hash matches
[    3.021262] rtc_cmos 00:01: setting system clock to 2019-07-10 23:16:55 UTC (1562800615)
[    3.023762] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.023766] EDD information not available.
[    3.028221] Freeing unused kernel image memory: 1064K
[    3.028420] Write protecting the kernel text: 8924k
[    3.028564] Write protecting the kernel read-only data: 3508k
[    3.028567] NX-protecting the kernel data: 7460k
[    3.029197] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.082458] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.082926] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.082980] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.234083] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    3.396333] usb 1-4: New USB device found, idVendor=064e, idProduct=a219
[    3.396345] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.396352] usb 1-4: Product: 1.3M WebCam
[    3.396359] usb 1-4: Manufacturer: Suyin
[    3.396365] usb 1-4: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[    3.706003] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    3.742590] ahci 0000:00:1f.2: version 3.0
[    3.743403] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.743458] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    3.743466] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    3.747288] scsi host0: ahci
[    3.747776] scsi host1: ahci
[    3.748222] scsi host2: ahci
[    3.748603] scsi host3: ahci
[    3.748785] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 26
[    3.748792] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 26
[    3.748795] ata3: DUMMY
[    3.748798] ata4: DUMMY
[    3.820121] atl1c 0000:01:00.0 enp1s0: renamed from eth0
[    4.215211] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.215531] ata1.00: unexpected _GTF length (4)
[    4.215676] ata1.00: ATA-10: KINGSTON SC151S3732GD, S9FM01.7, max UDMA/100
[    4.215681] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.216073] ata1.00: unexpected _GTF length (4)
[    4.216304] ata1.00: configured for UDMA/100
[    4.216746] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SC151S3 01.7 PQ: 0 ANSI: 5
[    4.217765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.218348] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    4.218423] sd 0:0:0:0: [sda] Write Protect is off
[    4.218432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.218566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.220787]  sda: sda1
[    4.222413] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.526984] ata2: SATA link down (SStatus 0 SControl 300)
[    4.679839] psmouse serio1: synaptics: queried max coordinates: x [..5612], y [..4618]
[    4.784293] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.784797] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 528321
[    4.849957] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.135424] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.159730] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.172532] systemd[1]: Detected architecture x86.
[    5.181197] systemd[1]: Set hostname to <manuel-AOD255>.
[    5.554704] systemd[1]: Created slice System Slice.
[    5.555353] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.555703] systemd[1]: Listening on Syslog Socket.
[    5.556145] systemd[1]: Listening on udev Control Socket.
[    5.556445] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.556766] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.557160] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.649112] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.734619] lp: driver loaded but no devices found
[    5.770159] ppdev: user-space parallel port driver
[    6.107427] Adding 1450908k swap on /swapfile.  Priority:-2 extents:5 across:1483676k SSFS
[    6.288865] systemd-journald[276]: Received request to flush runtime journal from PID 1
[    6.938629] audit: type=1400 audit(1562800619.415:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=378 comm="apparmor_parser"
[    6.938694] audit: type=1400 audit(1562800619.415:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser"
[    6.938746] audit: type=1400 audit(1562800619.415:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=378 comm="apparmor_parser"
[    6.938798] audit: type=1400 audit(1562800619.415:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser"
[    6.945754] audit: type=1400 audit(1562800619.422:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=376 comm="apparmor_parser"
[    6.945777] audit: type=1400 audit(1562800619.422:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=376 comm="apparmor_parser"
[    6.968705] audit: type=1400 audit(1562800619.445:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=384 comm="apparmor_parser"
[    6.974353] audit: type=1400 audit(1562800619.451:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=382 comm="apparmor_parser"
[    6.974375] audit: type=1400 audit(1562800619.451:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=382 comm="apparmor_parser"
[    6.974388] audit: type=1400 audit(1562800619.451:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=382 comm="apparmor_parser"
[    7.823126] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    7.952714] usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
[    7.952726] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    7.952733] usb 1-5: Product: UB6250       
[    7.952738] usb 1-5: Manufacturer: ENE Flash  
[    7.952744] usb 1-5: SerialNumber: 606569746801
[    8.405350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.316944] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    9.334088] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   10.025306] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20170831/utaddress-247)
[   10.025330] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.025337] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20170831/utaddress-247)
[   10.025354] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.025358] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20170831/utaddress-247)
[   10.025374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.025377] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.025385] lpc_ich 0000:00:1f.0: No MFD cells added
[   10.100694] pci 0000:00:00.0: Intel GMA3150 Chipset
[   10.100765] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   10.100996] pci 0000:00:00.0: detected 8192K stolen memory
[   10.101169] [drm] Memory usable by graphics device = 512M
[   10.101181] checking generic (40000000 1e0000) vs hw (40000000 10000000)
[   10.101196] fb: switching to inteldrmfb from VESA VGA
[   10.101425] Console: switching to colour dummy device 80x25
[   10.101990] [drm] Replacing VGA console driver
[   10.108142] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.108149] [drm] Driver supports precise vblank timestamp query.
[   10.116827] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.166325] [drm] RC6 disabled, disabling runtime PM support
[   10.166384] [drm] initialized overlay support
[   10.167386] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   10.170911] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   10.404324] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.427844] media: Linux media interface: v0.10
[   10.432998] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.476766] intel_powerclamp: No package C-state available
[   10.488332] acpi device:27: registered as cooling_device5
[   10.488659] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   10.514161] fbcon: inteldrmfb (fb0) is primary device
[   10.514614] Console: switching to colour frame buffer device 128x37
[   10.514651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.543713] intel_powerclamp: No package C-state available
[   10.632407] intel_powerclamp: No package C-state available
[   10.642399] intel_powerclamp: No package C-state available
[   10.744383] Linux video capture interface: v2.00
[   11.280813] acer_wmi: Acer Laptop ACPI-WMI Extras
[   11.280902] acer_wmi: Function bitmap for Communication Button: 0x801
[   11.287749] input: Acer WMI hotkeys as /devices/virtual/input/input8
[   11.330278] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[   11.340271] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[   11.340282] uvcvideo 1-4:1.0: Entity type for entity Processing 3 was not initialized!
[   11.340290] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[   11.340655] input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input9
[   11.346562] usbcore: registered new interface driver uvcvideo
[   11.346568] USB Video Class driver (1.1.1)
[   11.391905] usbcore: registered new interface driver usb-storage
[   11.513773] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[   11.525150] scsi host4: usb-storage 1-5:1.0
[   11.528332] usbcore: registered new interface driver ums_eneub6250
[   11.737503] ath: phy0: Enable LNA combining
[   11.740732] ath: phy0: ASPM enabled: 0x42
[   11.740740] ath: EEPROM regdomain: 0x65
[   11.740743] ath: EEPROM indicates we should expect a direct regpair map
[   11.740747] ath: Country alpha2 being used: 00
[   11.740750] ath: Regpair used: 0x65
[   11.769405] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.771728] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf7fd0000, irq=17
[   11.788779] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   11.825395] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.841707] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.901693] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.527716] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.527727] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.527735] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   12.527741] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.527747] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.527755] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   12.527762] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   12.543668] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.544148] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.018569] scsi 4:0:0:0: Direct-Access     USB2.0   CardReader       0100 PQ: 0 ANSI: 2
[   13.019862] sd 4:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[   13.019952] sd 4:0:0:0: [sdb] Write Protect is off
[   13.019962] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[   13.020563] sd 4:0:0:0: [sdb] No Caching mode page found
[   13.020583] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   13.022285] sd 4:0:0:0: Attached scsi generic sg1 type 0
[   13.032227]  sdb: sdb1
[   13.037930] sd 4:0:0:0: [sdb] Attached SCSI disk
[   46.902353] random: crng init done
[   46.902362] random: 7 urandom warning(s) missed due to ratelimiting
[   54.009850] wlp2s0: authenticate with 58:6d:8f:ec:28:61
[   54.027852] wlp2s0: send auth to 58:6d:8f:ec:28:61 (try 1/3)
[   54.030430] wlp2s0: authenticated
[   54.031321] ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[   54.032192] wlp2s0: associate with 58:6d:8f:ec:28:61 (try 1/3)
[   54.034887] wlp2s0: RX AssocResp from 58:6d:8f:ec:28:61 (capab=0x411 status=0 aid=5)
[   54.035410] wlp2s0: associated
[   54.060847] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  166.553130] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[  166.754198] usb 2-1: New USB device found, idVendor=26e7, idProduct=0001
[  166.754209] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  166.754217] usb 2-1: Product: Fishman TriplePlay
[  166.754224] usb 2-1: Manufacturer: Fishman Transducers, Inc.
[  166.754230] usb 2-1: SerialNumber: SN12345678
[  166.897887] usbcore: registered new interface driver snd-usb-audio
with Fishman Triple Play

Code: Select all

manuel@manuel-AOD255:~$ dmesg -w
[    0.000000] Linux version 4.15.0-50-lowlatency (buildd@lgw01-amd64-036) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #54-Ubuntu SMP PREEMPT Mon May 6 19:32:13 UTC 2019 (Ubuntu 4.15.0-50.54-lowlatency 4.15.18)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f493fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f494000-0x000000003f4befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f4bf000-0x000000003f576fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f577000-0x000000003f5befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f5ebfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f5ec000-0x000000003f5fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5ff000-0x000000003f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f600000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer AOD255/JE02_PT, BIOS V3.10(DDR3) 11/17/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-through
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x1b3fffff]
[    0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[    0.000000] BRK [0x1afdc000, 0x1afdcfff] PGTABLE
[    0.000000] BRK [0x1afdd000, 0x1afddfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33c19000-0x35e03fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000003F5FE120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000003F5FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 0x000000003F5F1000 008DCF (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 0x000000003F584000 000040
[    0.000000] ACPI: FACS 0x000000003F584000 000040
[    0.000000] ACPI: HPET 0x000000003F5FC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 0x000000003F5FB000 000078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 0x000000003F5FA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 0x000000003F5F0000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 0x000000003F5EF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 0x000000003F5ED000 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 0x000000003F5EC000 000194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 128MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] BRK [0x1afde000, 0x1afdefff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
[    0.000000]   HighMem  [mem 0x00000000375fe000-0x000000003f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003f493fff]
[    0.000000]   node   0: [mem 0x000000003f4bf000-0x000000003f576fff]
[    0.000000]   node   0: [mem 0x000000003f5bf000-0x000000003f5ebfff]
[    0.000000]   node   0: [mem 0x000000003f5ff000-0x000000003f5fffff]
[    0.000000] Reserved but unavailable: 2792 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f5fffff]
[    0.000000] On node 0 totalpages: 259352
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2175 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 32636 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics memory at 0x000000003f800000-0x000000003fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x81/0x43f with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93324 r0 d29556 u122880
[    0.000000] pcpu-alloc: s93324 r0 d29556 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 257137
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-lowlatency root=UUID=96c91724-f188-4146-93df-f18f6a3ae7c5 ro quiet splash vt.handoff=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0003f600)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 974836K/1037408K available (8922K kernel code, 893K rwdata, 3484K rodata, 1064K init, 860K bss, 62572K reserved, 0K cma-reserved, 130544K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                   vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                     .init : 0xdad17000 - 0xdae21000   (1064 kB)
                     .data : 0xda8b6b98 - 0xdad03500   (4402 kB)
                     .text : 0xda000000 - 0xda8b6b98   (8922 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 37929 entries in 75 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 1496.313 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.62 BogoMIPS (lpj=1496313)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] Yama: becoming mindful.
[    0.006000] AppArmor: AppArmor initialized
[    0.006000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007140] Disabled fast string operations
[    0.007161] mce: CPU supports 5 MCE banks
[    0.007173] CPU0: Thermal monitoring enabled (TM2)
[    0.007179] process: using mwait in idle threads
[    0.007192] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.007196] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.007632] Freeing SMP alternatives memory: 32K
[    0.010000] smpboot: CPU0: Intel(R) Atom(TM) CPU N550   @ 1.50GHz (family: 0x6, model: 0x1c, stepping: 0xa)
[    0.013030] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.013061] ... version:                3
[    0.013063] ... bit width:              40
[    0.013065] ... generic registers:      2
[    0.013068] ... value mask:             000000ffffffffff
[    0.013071] ... max period:             000000007fffffff
[    0.013073] ... fixed-purpose events:   3
[    0.013075] ... event mask:             0000000700000003
[    0.014025] Hierarchical SRCU implementation.
[    0.017377] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.018058] smp: Bringing up secondary CPUs ...
[    0.024067] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.024072] x86: Booting SMP configuration:
[    0.024075] .... node  #0, CPUs:      #1
[    0.001000] Initializing CPU#1
[    0.001000] Disabled fast string operations
[    0.034075] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.034081]  #2
[    0.001000] Initializing CPU#2
[    0.001000] Disabled fast string operations
[    0.045058] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.045063]  #3
[    0.001000] Initializing CPU#3
[    0.001000] Disabled fast string operations
[    0.049000] TSC synchronization [CPU#0 -> CPU#3]:
[    0.049000] Measured 45 cycles TSC warp between CPUs, turning off TSC clock.
[    0.049000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.050016] smp: Brought up 1 node, 4 CPUs
[    0.050016] smpboot: Max logical packages: 1
[    0.050018] smpboot: Total of 4 processors activated (11970.50 BogoMIPS)
[    0.052289] devtmpfs: initialized
[    0.053096] evm: security.selinux
[    0.053099] evm: security.SMACK64
[    0.053101] evm: security.SMACK64EXEC
[    0.053103] evm: security.SMACK64TRANSMUTE
[    0.053105] evm: security.SMACK64MMAP
[    0.053107] evm: security.apparmor
[    0.053109] evm: security.ima
[    0.053111] evm: security.capability
[    0.053170] PM: Registering ACPI NVS region [mem 0x3f577000-0x3f5befff] (294912 bytes)
[    0.053382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.053382] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.053382] pinctrl core: initialized pinctrl subsystem
[    0.054317] RTC time: 23:16:52, date: 07/10/19
[    0.054630] NET: Registered protocol family 16
[    0.055058] audit: initializing netlink subsys (disabled)
[    0.055085] audit: type=2000 audit(1562800612.055:1): state=initialized audit_enabled=0 res=1
[    0.055524] EISA bus registered
[    0.055564] cpuidle: using governor ladder
[    0.056031] cpuidle: using governor menu
[    0.056194] Simple Boot Flag at 0x44 set to 0x1
[    0.056233] ACPI: bus type PCI registered
[    0.056238] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.056415] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.057028] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.057028] PCI: Using MMCONFIG for extended config space
[    0.057029] PCI: Using configuration type 1 for base access
[    0.057070] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.057073] mtrr: probably your BIOS does not setup all CPUs.
[    0.057075] mtrr: corrected configuration.
[    0.064036] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.065027] ACPI: Added _OSI(Module Device)
[    0.065027] ACPI: Added _OSI(Processor Device)
[    0.065027] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.065027] ACPI: Added _OSI(Processor Aggregator Device)
[    0.065027] ACPI: Added _OSI(Linux-Dell-Video)
[    0.065027] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.065027] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.065250] ACPI: Executed 1 blocks of module-level executable AML code
[    0.074552] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.075844] ACPI: Dynamic OEM Table Load:
[    0.075867] ACPI: SSDT 0x00000000F3842800 0006C6 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.077239] ACPI: Dynamic OEM Table Load:
[    0.077260] ACPI: SSDT 0x00000000F3847000 000646 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.078918] ACPI: Dynamic OEM Table Load:
[    0.078935] ACPI: SSDT 0x00000000F3839E00 00015F (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.079624] ACPI: Dynamic OEM Table Load:
[    0.079639] ACPI: SSDT 0x00000000F674C900 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.082326] ACPI: EC: EC started
[    0.082329] ACPI: EC: interrupt blocked
[    0.084902] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[    0.084910] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.084915] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[    0.084917] ACPI: Interpreter enabled
[    0.084980] ACPI: (supports S0 S3 S4 S5)
[    0.084984] ACPI: Using IOAPIC for interrupt routing
[    0.085112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.085761] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.173084] ACPI: Power Resource [FN00] (on)
[    0.175697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.175713] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.176165] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.176577] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.178099] PCI host bridge to bus 0000:00
[    0.178108] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.178114] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.178120] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.178125] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[    0.178131] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.178154] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.178437] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.178457] pci 0000:00:02.0: reg 0x10: [mem 0x58180000-0x581fffff]
[    0.178470] pci 0000:00:02.0: reg 0x14: [io  0x60c0-0x60c7]
[    0.178484] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.178498] pci 0000:00:02.0: reg 0x1c: [mem 0x58000000-0x580fffff]
[    0.178759] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.178777] pci 0000:00:02.1: reg 0x10: [mem 0x58100000-0x5817ffff]
[    0.179102] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.179149] pci 0000:00:1b.0: reg 0x10: [mem 0x58200000-0x58203fff 64bit]
[    0.179299] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.179581] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.179744] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.180039] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.180201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.180483] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.180565] pci 0000:00:1d.0: reg 0x20: [io  0x6080-0x609f]
[    0.180844] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.180925] pci 0000:00:1d.1: reg 0x20: [io  0x6060-0x607f]
[    0.181229] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.181309] pci 0000:00:1d.2: reg 0x20: [io  0x6040-0x605f]
[    0.181600] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.181680] pci 0000:00:1d.3: reg 0x20: [io  0x6020-0x603f]
[    0.181969] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.182030] pci 0000:00:1d.7: reg 0x10: [mem 0x58204400-0x582047ff]
[    0.182164] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.182405] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.182732] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.183139] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.183176] pci 0000:00:1f.2: reg 0x10: [io  0x60b8-0x60bf]
[    0.183193] pci 0000:00:1f.2: reg 0x14: [io  0x60cc-0x60cf]
[    0.183210] pci 0000:00:1f.2: reg 0x18: [io  0x60b0-0x60b7]
[    0.183226] pci 0000:00:1f.2: reg 0x1c: [io  0x60c8-0x60cb]
[    0.183243] pci 0000:00:1f.2: reg 0x20: [io  0x60a0-0x60af]
[    0.183260] pci 0000:00:1f.2: reg 0x24: [mem 0x58204000-0x582043ff]
[    0.183336] pci 0000:00:1f.2: PME# supported from D3hot
[    0.183593] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.183673] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.184146] pci 0000:01:00.0: [1969:2060] type 00 class 0x020000
[    0.184206] pci 0000:01:00.0: reg 0x10: [mem 0x57000000-0x5703ffff 64bit]
[    0.184227] pci 0000:01:00.0: reg 0x18: [io  0x5000-0x507f]
[    0.184413] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188038] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.188048] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.188057] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.188069] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.188285] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.188346] pci 0000:02:00.0: reg 0x10: [mem 0x56000000-0x5600ffff 64bit]
[    0.189132] pci 0000:02:00.0: supports D1
[    0.189137] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.192039] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.192049] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.192057] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.192069] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.192219] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.192240] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.192246] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.192252] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.192257] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff window] (subtractive decode)
[    0.192291] pci_bus 0000:00: on NUMA node 0
[    0.257394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.257394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.257394] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.257604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.257829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.258095] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.258325] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.258568] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.260441] ACPI: EC: interrupt unblocked
[    0.260459] ACPI: EC: event unblocked
[    0.260477] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.260486] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.261563] SCSI subsystem initialized
[    0.262068] libata version 3.00 loaded.
[    0.262132] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.262132] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.262132] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.262132] vgaarb: loaded
[    0.262178] ACPI: bus type USB registered
[    0.262252] usbcore: registered new interface driver usbfs
[    0.262286] usbcore: registered new interface driver hub
[    0.262374] usbcore: registered new device driver usb
[    0.263066] EDAC MC: Ver: 3.0.0
[    0.263323] PCI: Using ACPI for IRQ routing
[    0.273725] PCI: pci_cache_line_size set to 64 bytes
[    0.273815] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.273820] e820: reserve RAM buffer [mem 0x3f494000-0x3fffffff]
[    0.273825] e820: reserve RAM buffer [mem 0x3f577000-0x3fffffff]
[    0.273829] e820: reserve RAM buffer [mem 0x3f5ec000-0x3fffffff]
[    0.273833] e820: reserve RAM buffer [mem 0x3f600000-0x3fffffff]
[    0.274212] NetLabel: Initializing
[    0.274216] NetLabel:  domain hash size = 128
[    0.274218] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.274264] NetLabel:  unlabeled traffic allowed by default
[    0.277415] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.277427] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.277439] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.283070] clocksource: Switched to clocksource hpet
[    0.329624] VFS: Disk quotas dquot_6.6.0
[    0.329682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.330071] AppArmor: AppArmor Filesystem Enabled
[    0.330177] pnp: PnP ACPI init
[    0.394683] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.394693] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.394699] system 00:00: [io  0x0610] has been reserved
[    0.394705] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.394711] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.394717] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.394723] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.394730] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.394738] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.394745] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.394751] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.394758] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.394764] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.394771] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.394777] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.394799] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.394949] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.395263] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.395469] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.395839] pnp: PnP ACPI: found 4 devices
[    0.395847] PnPBIOS: Disabled by ACPI PNP
[    0.439485] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.439559] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.439567] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.439578] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.439587] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.439600] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.439606] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.439616] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.439625] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.439637] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.439660] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.439666] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.439672] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439677] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]
[    0.439682] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.439688] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
[    0.439693] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.439699] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.439704] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
[    0.439709] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.439715] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.439721] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.439726] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.439731] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff window]
[    0.440060] NET: Registered protocol family 2
[    0.440548] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.440608] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.440669] TCP: Hash tables configured (established 8192 bind 8192)
[    0.440757] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.440776] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.440922] NET: Registered protocol family 1
[    0.440966] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.444315] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.444329] PCI: CLS 64 bytes, default 64
[    0.444489] Unpacking initramfs...
[    2.126455] Freeing initrd memory: 34732K
[    2.126682] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159187ac396, max_idle_ns: 440795266593 ns
[    2.127084] Scanning for low memory corruption every 60 seconds
[    2.129075] Initialise system trusted keyrings
[    2.129102] Key type blacklist registered
[    2.129276] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    2.134346] zbud: loaded
[    2.135679] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.136398] fuse init (API version 7.26)
[    2.143258] Key type asymmetric registered
[    2.143263] Asymmetric key parser 'x509' registered
[    2.143304] bounce: pool size: 64 pages
[    2.143356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.143504] io scheduler noop registered
[    2.143507] io scheduler deadline registered
[    2.143707] io scheduler cfq registered (default)
[    2.145858] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.146096] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    2.146413] vesafb: mode is 800x600x32, linelength=3200, pages=0
[    2.146417] vesafb: scrolling: redraw
[    2.146422] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.146468] vesafb: framebuffer at 0x40000000, mapped to 0x(ptrval), using 1920k, total 1920k
[    2.146832] Console: switching to colour frame buffer device 100x37
[    2.146874] fb0: VESA VGA frame buffer device
[    2.146941] intel_idle: MWAIT substates: 0x20220
[    2.146945] intel_idle: v0.4.1 model 0x1C
[    2.147526] intel_idle: lapic_timer_reliable_states 0x2
[    2.211623] ACPI: AC Adapter [AC] (off-line)
[    2.211740] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.211924] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.211963] ACPI: Power Button [PWRB]
[    2.212225] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.212264] ACPI: Sleep Button [SLPB]
[    2.212371] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.212525] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    2.212560] ACPI: Lid Switch [LID0]
[    2.212799] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.212880] ACPI: Power Button [PWRF]
[    2.216401] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.216999] thermal LNXTHERM:00: registered as thermal_zone0
[    2.217056] ACPI: Thermal Zone [THRM] (29 C)
[    2.217486] isapnp: Scanning for PnP cards...
[    2.217727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.286815] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.287377] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.350724] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.351281] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    2.414507] random: fast init done
[    2.530826] isapnp: No Plug & Play device found
[    2.892477] ACPI: Battery Slot [BAT0] (battery present)
[    2.893053] Linux agpgart interface v0.103
[    2.900258] loop: module loaded
[    2.901083] libphy: Fixed MDIO Bus: probed
[    2.901088] tun: Universal TUN/TAP device driver, 1.6
[    2.901271] PPP generic driver version 2.4.2
[    2.901450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.901462] ehci-pci: EHCI PCI platform driver
[    2.901919] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.901938] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.901964] ehci-pci 0000:00:1d.7: debug port 1
[    2.905983] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.906199] ehci-pci 0000:00:1d.7: irq 22, io mem 0x58204400
[    2.913163] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.913341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.913347] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.913352] usb usb1: Product: EHCI Host Controller
[    2.913357] usb usb1: Manufacturer: Linux 4.15.0-50-lowlatency ehci_hcd
[    2.913361] usb usb1: SerialNumber: 0000:00:1d.7
[    2.913798] hub 1-0:1.0: USB hub found
[    2.913825] hub 1-0:1.0: 8 ports detected
[    2.914893] ehci-platform: EHCI generic platform driver
[    2.914947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.914963] ohci-pci: OHCI PCI platform driver
[    2.915065] ohci-platform: OHCI generic platform driver
[    2.915106] uhci_hcd: USB Universal Host Controller Interface driver
[    2.915525] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.915542] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.915558] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.915815] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
[    2.916082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.916089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.916095] usb usb2: Product: UHCI Host Controller
[    2.916099] usb usb2: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.916104] usb usb2: SerialNumber: 0000:00:1d.0
[    2.916505] hub 2-0:1.0: USB hub found
[    2.916532] hub 2-0:1.0: 2 ports detected
[    2.917334] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.917351] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.917377] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.917579] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
[    2.917780] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.917786] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.917790] usb usb3: Product: UHCI Host Controller
[    2.917795] usb usb3: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.917799] usb usb3: SerialNumber: 0000:00:1d.1
[    2.918255] hub 3-0:1.0: USB hub found
[    2.918284] hub 3-0:1.0: 2 ports detected
[    2.919072] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.919096] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.919113] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.919315] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[    2.919527] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.919533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.919538] usb usb4: Product: UHCI Host Controller
[    2.919542] usb usb4: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.919547] usb usb4: SerialNumber: 0000:00:1d.2
[    2.919972] hub 4-0:1.0: USB hub found
[    2.919999] hub 4-0:1.0: 2 ports detected
[    2.920809] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.920827] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.920842] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.921087] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
[    2.921286] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.921292] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.921297] usb usb5: Product: UHCI Host Controller
[    2.921302] usb usb5: Manufacturer: Linux 4.15.0-50-lowlatency uhci_hcd
[    2.921306] usb usb5: SerialNumber: 0000:00:1d.3
[    2.921719] hub 5-0:1.0: USB hub found
[    2.921747] hub 5-0:1.0: 2 ports detected
[    2.922448] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.936501] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.936643] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.937147] mousedev: PS/2 mouse device common for all mice
[    2.937903] rtc_cmos 00:01: RTC can wake from S4
[    2.938210] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.938399] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.938436] i2c /dev entries driver
[    2.938460] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    2.938815] device-mapper: uevent: version 1.0.3
[    2.939143] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.939227] platform eisa.0: Probing EISA bus 0
[    2.939234] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.939241] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.939247] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.939252] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.939258] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.939264] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.939269] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.939275] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.939281] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.939285] platform eisa.0: EISA: Detected 0 cards
[    2.939297] cpufreq_nforce2: No nForce2 chipset
[    2.939493] ledtrig-cpu: registered to indicate activity on CPUs
[    2.940333] NET: Registered protocol family 10
[    2.951886] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.962428] Segment Routing with IPv6
[    2.962501] NET: Registered protocol family 17
[    2.962655] Key type dns_resolver registered
[    2.963800] microcode: sig=0x106ca, pf=0x10, revision=0x107
[    2.964060] microcode: Microcode Update Driver: v2.2.
[    2.964071] Using IPI No-Shortcut mode
[    2.964611] registered taskstats version 1
[    2.964640] Loading compiled-in X.509 certificates
[    2.987899] Loaded X.509 cert 'Build time autogenerated kernel key: f03cce9a429370e7ce67161f8f7e7b60539527c4'
[    2.987980] zswap: loaded using pool lzo/zbud
[    3.011968] Key type big_key registered
[    3.011984] Key type trusted registered
[    3.020325] Key type encrypted registered
[    3.020338] AppArmor: AppArmor sha1 policy hashing enabled
[    3.020346] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.020365] ima: Allocated hash algorithm: sha1
[    3.020408] evm: HMAC attrs: 0x1
[    3.020960]   Magic number: 11:916:301
[    3.021099] tty tty30: hash matches
[    3.021262] rtc_cmos 00:01: setting system clock to 2019-07-10 23:16:55 UTC (1562800615)
[    3.023762] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.023766] EDD information not available.
[    3.028221] Freeing unused kernel image memory: 1064K
[    3.028420] Write protecting the kernel text: 8924k
[    3.028564] Write protecting the kernel read-only data: 3508k
[    3.028567] NX-protecting the kernel data: 7460k
[    3.029197] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.082458] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.082926] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.082980] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.234083] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    3.396333] usb 1-4: New USB device found, idVendor=064e, idProduct=a219
[    3.396345] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.396352] usb 1-4: Product: 1.3M WebCam
[    3.396359] usb 1-4: Manufacturer: Suyin
[    3.396365] usb 1-4: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[    3.706003] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    3.742590] ahci 0000:00:1f.2: version 3.0
[    3.743403] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.743458] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    3.743466] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    3.747288] scsi host0: ahci
[    3.747776] scsi host1: ahci
[    3.748222] scsi host2: ahci
[    3.748603] scsi host3: ahci
[    3.748785] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 26
[    3.748792] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 26
[    3.748795] ata3: DUMMY
[    3.748798] ata4: DUMMY
[    3.820121] atl1c 0000:01:00.0 enp1s0: renamed from eth0
[    4.215211] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.215531] ata1.00: unexpected _GTF length (4)
[    4.215676] ata1.00: ATA-10: KINGSTON SC151S3732GD, S9FM01.7, max UDMA/100
[    4.215681] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.216073] ata1.00: unexpected _GTF length (4)
[    4.216304] ata1.00: configured for UDMA/100
[    4.216746] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SC151S3 01.7 PQ: 0 ANSI: 5
[    4.217765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.218348] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    4.218423] sd 0:0:0:0: [sda] Write Protect is off
[    4.218432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.218566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.220787]  sda: sda1
[    4.222413] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.526984] ata2: SATA link down (SStatus 0 SControl 300)
[    4.679839] psmouse serio1: synaptics: queried max coordinates: x [..5612], y [..4618]
[    4.784293] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.784797] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 528321
[    4.849957] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.135424] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.159730] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.172532] systemd[1]: Detected architecture x86.
[    5.181197] systemd[1]: Set hostname to <manuel-AOD255>.
[    5.554704] systemd[1]: Created slice System Slice.
[    5.555353] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.555703] systemd[1]: Listening on Syslog Socket.
[    5.556145] systemd[1]: Listening on udev Control Socket.
[    5.556445] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.556766] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.557160] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.649112] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.734619] lp: driver loaded but no devices found
[    5.770159] ppdev: user-space parallel port driver
[    6.107427] Adding 1450908k swap on /swapfile.  Priority:-2 extents:5 across:1483676k SSFS
[    6.288865] systemd-journald[276]: Received request to flush runtime journal from PID 1
[    6.938629] audit: type=1400 audit(1562800619.415:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=378 comm="apparmor_parser"
[    6.938694] audit: type=1400 audit(1562800619.415:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser"
[    6.938746] audit: type=1400 audit(1562800619.415:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=378 comm="apparmor_parser"
[    6.938798] audit: type=1400 audit(1562800619.415:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser"
[    6.945754] audit: type=1400 audit(1562800619.422:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=376 comm="apparmor_parser"
[    6.945777] audit: type=1400 audit(1562800619.422:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=376 comm="apparmor_parser"
[    6.968705] audit: type=1400 audit(1562800619.445:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=384 comm="apparmor_parser"
[    6.974353] audit: type=1400 audit(1562800619.451:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=382 comm="apparmor_parser"
[    6.974375] audit: type=1400 audit(1562800619.451:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=382 comm="apparmor_parser"
[    6.974388] audit: type=1400 audit(1562800619.451:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=382 comm="apparmor_parser"
[    7.823126] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    7.952714] usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
[    7.952726] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    7.952733] usb 1-5: Product: UB6250       
[    7.952738] usb 1-5: Manufacturer: ENE Flash  
[    7.952744] usb 1-5: SerialNumber: 606569746801
[    8.405350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.316944] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    9.334088] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   10.025306] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20170831/utaddress-247)
[   10.025330] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.025337] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20170831/utaddress-247)
[   10.025354] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.025358] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20170831/utaddress-247)
[   10.025374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.025377] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.025385] lpc_ich 0000:00:1f.0: No MFD cells added
[   10.100694] pci 0000:00:00.0: Intel GMA3150 Chipset
[   10.100765] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   10.100996] pci 0000:00:00.0: detected 8192K stolen memory
[   10.101169] [drm] Memory usable by graphics device = 512M
[   10.101181] checking generic (40000000 1e0000) vs hw (40000000 10000000)
[   10.101196] fb: switching to inteldrmfb from VESA VGA
[   10.101425] Console: switching to colour dummy device 80x25
[   10.101990] [drm] Replacing VGA console driver
[   10.108142] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.108149] [drm] Driver supports precise vblank timestamp query.
[   10.116827] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.166325] [drm] RC6 disabled, disabling runtime PM support
[   10.166384] [drm] initialized overlay support
[   10.167386] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   10.170911] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   10.404324] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.427844] media: Linux media interface: v0.10
[   10.432998] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.476766] intel_powerclamp: No package C-state available
[   10.488332] acpi device:27: registered as cooling_device5
[   10.488659] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   10.514161] fbcon: inteldrmfb (fb0) is primary device
[   10.514614] Console: switching to colour frame buffer device 128x37
[   10.514651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.543713] intel_powerclamp: No package C-state available
[   10.632407] intel_powerclamp: No package C-state available
[   10.642399] intel_powerclamp: No package C-state available
[   10.744383] Linux video capture interface: v2.00
[   11.280813] acer_wmi: Acer Laptop ACPI-WMI Extras
[   11.280902] acer_wmi: Function bitmap for Communication Button: 0x801
[   11.287749] input: Acer WMI hotkeys as /devices/virtual/input/input8
[   11.330278] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[   11.340271] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[   11.340282] uvcvideo 1-4:1.0: Entity type for entity Processing 3 was not initialized!
[   11.340290] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[   11.340655] input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input9
[   11.346562] usbcore: registered new interface driver uvcvideo
[   11.346568] USB Video Class driver (1.1.1)
[   11.391905] usbcore: registered new interface driver usb-storage
[   11.513773] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[   11.525150] scsi host4: usb-storage 1-5:1.0
[   11.528332] usbcore: registered new interface driver ums_eneub6250
[   11.737503] ath: phy0: Enable LNA combining
[   11.740732] ath: phy0: ASPM enabled: 0x42
[   11.740740] ath: EEPROM regdomain: 0x65
[   11.740743] ath: EEPROM indicates we should expect a direct regpair map
[   11.740747] ath: Country alpha2 being used: 00
[   11.740750] ath: Regpair used: 0x65
[   11.769405] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.771728] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf7fd0000, irq=17
[   11.788779] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   11.825395] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.841707] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.901693] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.527716] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.527727] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.527735] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   12.527741] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.527747] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.527755] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   12.527762] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   12.543668] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.544148] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.018569] scsi 4:0:0:0: Direct-Access     USB2.0   CardReader       0100 PQ: 0 ANSI: 2
[   13.019862] sd 4:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[   13.019952] sd 4:0:0:0: [sdb] Write Protect is off
[   13.019962] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[   13.020563] sd 4:0:0:0: [sdb] No Caching mode page found
[   13.020583] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   13.022285] sd 4:0:0:0: Attached scsi generic sg1 type 0
[   13.032227]  sdb: sdb1
[   13.037930] sd 4:0:0:0: [sdb] Attached SCSI disk
[   46.902353] random: crng init done
[   46.902362] random: 7 urandom warning(s) missed due to ratelimiting
[   54.009850] wlp2s0: authenticate with 58:6d:8f:ec:28:61
[   54.027852] wlp2s0: send auth to 58:6d:8f:ec:28:61 (try 1/3)
[   54.030430] wlp2s0: authenticated
[   54.031321] ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[   54.032192] wlp2s0: associate with 58:6d:8f:ec:28:61 (try 1/3)
[   54.034887] wlp2s0: RX AssocResp from 58:6d:8f:ec:28:61 (capab=0x411 status=0 aid=5)
[   54.035410] wlp2s0: associated
[   54.060847] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  166.553130] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[  166.754198] usb 2-1: New USB device found, idVendor=26e7, idProduct=0001
[  166.754209] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  166.754217] usb 2-1: Product: Fishman TriplePlay
[  166.754224] usb 2-1: Manufacturer: Fishman Transducers, Inc.
[  166.754230] usb 2-1: SerialNumber: SN12345678
[  166.897887] usbcore: registered new interface driver snd-usb-audio
Thanks
Manuel

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Thu Jul 11, 2019 5:44 pm

odroid wrote:
Thu Jul 11, 2019 10:29 am
Updated the system.
Other user has confirmed the MIDI input device worked with the Kernel 4.9.184-3 update.
viewtopic.php?f=177&t=35212&p=261951#p261951
Well, what can I do? just do the sudo apt upgrade command?

please show me the way step by step :)

thanks
Manuel

User avatar
odroid
Site Admin
Posts: 32368
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 147 times
Been thanked: 325 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by odroid » Thu Jul 11, 2019 6:24 pm

Yes, "apt upgrade" must be enough.

Code: Select all

sudo apt update
sudo apt upgrade
sudo reboot
These users thanked the author odroid for the post:
ManuelFantoni (Thu Jul 11, 2019 6:45 pm)

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Thu Jul 11, 2019 6:47 pm

odroid wrote:
Thu Jul 11, 2019 6:24 pm
Yes, "apt upgrade" must be enough.

Code: Select all

sudo apt update
sudo apt upgrade
sudo reboot
Thank you, I will try tonight.
I will let you know

8-)

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Fri Jul 12, 2019 6:58 pm

odroid wrote:
Thu Jul 11, 2019 6:24 pm
Yes, "apt upgrade" must be enough.

Code: Select all

sudo apt update
sudo apt upgrade
sudo reboot
Thank you, you are great! it works !!!

I've tried with QTJackD Midi “RAW” driver and it's OK, but with "SEQ" there are still problems

thanks
Manuel

User avatar
odroid
Site Admin
Posts: 32368
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 147 times
Been thanked: 325 times
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by odroid » Mon Jul 15, 2019 10:24 am

How to test the SEQ feature?
We already enable the "SND_RAWMIDI_SEQ" driver.
https://github.com/hardkernel/linux/com ... 548b7R3989

ManuelFantoni
Posts: 28
Joined: Thu Jun 27, 2019 10:18 pm
languages_spoken: english, italian
ODROIDs: N2 4Gb
Has thanked: 24 times
Been thanked: 0
Contact:

Re: Ubuntu support for MIDI/USB musical keyboard

Unread post by ManuelFantoni » Tue Jul 16, 2019 7:22 pm

Dear Odroid,

you can try with jack, I attach screens.
thank you
Attachments
Screenshot_2019-07-15_23-58-01.png
Screenshot_2019-07-15_23-58-01.png (101.17 KiB) Viewed 609 times
Screenshot_2019-07-15_23-57-02.png
Screenshot_2019-07-15_23-57-02.png (182.43 KiB) Viewed 609 times
Screenshot_2019-07-15_23-56-08.png
Screenshot_2019-07-15_23-56-08.png (172.92 KiB) Viewed 609 times

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 2 guests