[SOLVED] HDMI CEC on odroid XU4

Post Reply
kiloupyn
Posts: 4
Joined: Thu Mar 17, 2016 4:23 am
languages_spoken: english
Contact:

[SOLVED] HDMI CEC on odroid XU4

Unread post by kiloupyn » Thu Mar 17, 2016 4:37 am

Hello,

I would like to know if the odroid XU4 board works with the HDMI-CEC linux library (libcec). My TV brand is Samsung.

Anyone got experience with it ?

Best Regards,
PY

User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Thu Mar 17, 2016 11:01 am

We tested Samsung Anynet+ with Kodi on Ubuntu and Android.
It worked.

kiloupyn
Posts: 4
Joined: Thu Mar 17, 2016 4:23 am
languages_spoken: english
Contact:

Re: HDMI CEC on odroid XU4

Unread post by kiloupyn » Fri Mar 18, 2016 2:54 am

Ok, thank you !

bobzibub
Posts: 7
Joined: Thu Jun 20, 2013 1:00 am
languages_spoken: english
ODROIDs: U2
Contact:

Re: HDMI CEC on odroid XU4

Unread post by bobzibub » Wed Apr 06, 2016 5:49 pm

I'm not having luck with my Samsung 1080p TV and my XU4 (64G eMMC) on Ubuntu 15.10 either.
The resolution does not change regardless of my changes to the boot.ini video settings (simply un-commenting any setenv line, CEC or not). Even 720i/p settings are ignored.
The screen is "zoomed" and only the middle shows. So I can't see the "start" menus.

User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Wed Apr 06, 2016 6:15 pm

Show us your boot.ini file in /media/boot/ directory.

bobzibub
Posts: 7
Joined: Thu Jun 20, 2013 1:00 am
languages_spoken: english
ODROIDs: U2
Contact:

Re: HDMI CEC on odroid XU4

Unread post by bobzibub » Thu Apr 07, 2016 8:31 pm

odroid wrote:Show us your boot.ini file in /media/boot/ directory.
sorry, I had no eth0 device but I'm muddling through! = )

Code: Select all

ODROIDXU-UBOOT-CONFIG

# U-Boot Parameters
setenv initrd_high "0xffffffff"
setenv fdt_high "0xffffffff"

# Mac address configuration
setenv macaddr "00:1e:06:61:7a:39"

#------------------------------------------------------------------------------------------------------
# Basic Ubuntu Setup. Don't touch unless you know what you are doing.
# --------------------------------
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 "

# boot commands
setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mmc 0:1 0x42000000 uInitrd; fatload mmc 0:1 0x44000000 exynos5422-odroidxu3.dtb; bootz 0x40008000 0x42000000 0x44000000"

# --- Screen Configuration for HDMI --- # 
# ---------------------------------------
# Uncomment only ONE line! Leave all commented for automatic selection.
# Uncomment only the setenv line!
# ---------------------------------------
# ODROID-VU forced resolution
# setenv videoconfig "video=HDMI-A-1:1280x800@60"
# -----------------------------------------------
# ODROID-VU forced EDID
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
# -----------------------------------------------
# 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
setenv videoconfig "video=HDMI-A-1:1920x1080@60"
# -----------------------------------------------
# 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
#setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
# -----------------------------------------------
# 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
# setenv videoconfig "video=HDMI-A-1:1920x1080@50"
# -----------------------------------------------
# 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
# -----------------------------------------------
# 1440x900 with monitor provided EDID information.
# setenv videoconfig "video=HDMI-A-1:1440x900@60"
# -----------------------------------------------
# 1440x900 without monitor data using generic information 
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
# -----------------------------------------------
# 1280x720 (720P) with monitor provided EDID information. (720p-edid)
# setenv videoconfig "video=HDMI-A-1:1280x720@60"
# -----------------------------------------------
# 1280x720 (720P) without monitor data using generic information (720p-noedid)
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
# -----------------------------------------------
# 1024x768 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
# -----------------------------------------------
# 800x600 without monitor data using generic information 
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
# -----------------------------------------------
# 800x480 without monitor data using generic information (ODROID 7")
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
# -----------------------------------------------
# 720x576 without monitor data using generic information 
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
# -----------------------------------------------
# 720x480 without monitor data using generic information 
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
# -----------------------------------------------
# 640x480 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"


# --- HDMI / DVI Mode Selection ---
# ------------------------------------------
# - HDMI Mode
setenv vout "hdmi"
# - DVI Mode (disables sound over HDMI as per DVI compat)
# setenv vout "dvi"


# --- CPU Governor Setup ---
# Uncomment only one line. New governor is set after 90secs after boot.
# ------------------------------------------
# - Performance (Keep all the CPU's at Maximum frequency)
setenv governor "performance"
# ------------------------------------------
# - Ondemand
# setenv governor "ondemand"
# ------------------------------------------
# - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
# setenv governor "interactive"
# ------------------------------------------
# - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
# setenv governor "conservative"
# ------------------------------------------
# - Powersave (Keeps the CPU's to the lowest possible temps)
# setenv governor "powersave"


#------------------------------------------------------------------------------
#
# HDMI-PHY Parameter Control
#
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
#
# HDMI Hot Plug detection
#
#------------------------------------------------------------------------------
#
# Forces the HDMI subsystem to ignore the check if the cable is connected or 
# not.
# false : disable the detection and force it as connected.
# true : let cable, board and monitor decide the connection status.
# 
# default: true
# 
#------------------------------------------------------------------------------
#setenv HPD "true"
setenv HPD "false"
#------------------------------------------------------------------------------
#
#  TMDS data amplitude control.
#
#------------------------------------------------------------------------------
#
#  1LSB corresponds to 20 mVdiff amplitude level.
#  tx_amp_lvl : 0 = 760 mVdiff(Min), 31 = 1380 mVdiff(Max)
#
#  Hardkernel default hdmi_tx_amp_lvl = 31(1380 mVdiff);
#------------------------------------------------------------------------------
setenv hdmi_tx_amp_lvl  "31"

#------------------------------------------------------------------------------
#
#  TMDS data amplitude fine control for each channel.
#
#------------------------------------------------------------------------------
#
#  1LSB corresponds to 20 mVdiff amplitude level.
#  tx_lvl : 0 = 0 mVdiff(Min), 3 = 60 mVdiff(Max)
#
#  Hardkernel default
#      hdmi_tx_lvl_ch0 = 3, hdmi_tx_lvl_ch1 = 3, hdmi_tx_lvl_ch2 = 3,
#------------------------------------------------------------------------------
setenv hdmi_tx_lvl_ch0      "3"
setenv hdmi_tx_lvl_ch1      "3"
setenv hdmi_tx_lvl_ch2      "3"

#------------------------------------------------------------------------------
#
#  TMDS data pre-emphasis level control.
#
#------------------------------------------------------------------------------
#
#  1LSB corresponds to -0.45dB emphasis level except for 1
#  tx_emp_lvl : 0 = 0 db(Min), 1 = -0.25 db, 2 = 0.7 db, 15 = -7.45 db(Max)
#
#  Hardkernel default hdmi_tx_emp_lvl = 6 (-2.50 db);
#------------------------------------------------------------------------------
setenv hdmi_tx_emp_lvl      "6"

#------------------------------------------------------------------------------
#
#  TMDS clock amplitude control.
#
#------------------------------------------------------------------------------
#
#  1LSB corresponds to 20 mVdiff amplitude level.
#  clk_amp_lvl : 0 = 790 mVdiff(Min), 31 = 1410 mVdiff(Max)
#
#  Hardkernel default hdmi_clk_amp_lvl = 31 (1410 mVdiff)
#------------------------------------------------------------------------------
setenv hdmi_clk_amp_lvl     "31"

#------------------------------------------------------------------------------
#
#  TMDS data source termination resistor control.
#
#------------------------------------------------------------------------------
#
#  tx_res :
#      0 = Source Termination OFF(Min), 1 = 200 ohm, 2 = 300 ohm, 3 = 120 ohm(Max)
#
#  Hardkernrel default hdmi_tx_res = 0 (Source Termination OFF)
#------------------------------------------------------------------------------
setenv hdmi_tx_res      "0"

#------------------------------------------------------------------------------

setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"

# final boot args
setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control}"
# drm.debug=0xff
# Boot the board
boot
It appears to get the CEC info from the TV:

Code: Select all

[    4.360356] [c5] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
[    4.369976] [c5] of_get_named_gpio_flags exited with status 38
[    4.370097] [c5] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec
[    4.379428] s5p-tvout-cec 101b0000.cec: probe successful
[    4.388278] [c5] TRIMINFO[0] = 0x806e33
[    4.394152] [c5] TMU_CONTROL[0] = 0x10609803
[    4.400435] [c5] CURRENT_TEMP[0] = 0x4e
[    4.406256] [c5] THRESHOLD_TEMP_RISE[0] = 0x88837e79
[    4.413211] [c5] THRESHOLD_TEMP_FALL[0] = 0x86817c77
[    4.420126] [c5] INTEN[0] = 0x11111111
[    4.425845] [c5] INTCLEAR[0] = 0x0
[    4.431213] [c5] TRIMINFO[1] = 0x806529
[    4.436948] [c5] TMU_CONTROL[1] = 0x10609803
[    4.443069] [c5] CURRENT_TEMP[1] = 0x44
[    4.448771] [c5] THRESHOLD_TEMP_RISE[1] = 0x7e79746f
[    4.455593] [c5] THRESHOLD_TEMP_FALL[1] = 0x7c77726d
[    4.462388] [c5] INTEN[1] = 0x11111111
[    4.467942] [c5] INTCLEAR[1] = 0x0
[    4.473200] [c5] TRIMINFO[2] = 0x806328
[    4.478851] [c5] TMU_CONTROL[2] = 0x10609803
[    4.484893] [c5] CURRENT_TEMP[2] = 0x4b
[    4.490467] [c5] THRESHOLD_TEMP_RISE[2] = 0x837e7974
[    4.497159] [c5] THRESHOLD_TEMP_FALL[2] = 0x817c7772
[    4.503836] [c5] INTEN[2] = 0x11111111
[    4.509265] [c5] INTCLEAR[2] = 0x0
[    4.514382] [c5] TRIMINFO[3] = 0x806a2e
[    4.519923] [c5] TMU_CONTROL[3] = 0x10609803
[    4.525862] [c5] CURRENT_TEMP[3] = 0x50
[    4.531320] [c5] THRESHOLD_TEMP_RISE[3] = 0x88837e79
[    4.537917] [c5] THRESHOLD_TEMP_FALL[3] = 0x86817c77
[    4.544494] [c5] INTEN[3] = 0x11111111
[    4.549843] [c5] INTCLEAR[3] = 0x0
[    4.554858] [c5] TRIMINFO[4] = 0x806e33
[    4.560270] [c5] TMU_CONTROL[4] = 0x10609803
[    4.566091] [c5] CURRENT_TEMP[4] = 0x3e
[    4.571444] [c5] THRESHOLD_TEMP_RISE[4] = 0x7d78736e
[    4.577929] [c5] THRESHOLD_TEMP_FALL[4] = 0x7b76716c
[    4.584421] [c5] INTEN[4] = 0x11111111
[    4.589673] [c5] INTCLEAR[4] = 0x0

bobzibub
Posts: 7
Joined: Thu Jun 20, 2013 1:00 am
languages_spoken: english
ODROIDs: U2
Contact:

Re: HDMI CEC on odroid XU4

Unread post by bobzibub » Thu Apr 07, 2016 8:56 pm

After research, it looks like overscan. Trying to figure out my options. xrandr etc.
After more research, I needed to use a different HDMI port. I'm good now, thank you!
b

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Wed Nov 29, 2017 6:10 am

Hi. On the new kernel 4.14 HDMI-CEC does not work
odroid@odroid:~$ cec-client -1
No device type given. Using 'recording device'
CEC Parser created - libCEC version 4.0.2
opening a connection to the CEC adapter...
DEBUG: [ 0] Broadcast (F): osd name set to 'Broadcast'
ERROR: [ 3502] error opening serial port '-1': No such file or directory
ERROR: [ 3502] could not open a connection (try 1)
ERROR: [ 6339] error opening serial port '-1': No such file or directory
ERROR: [ 6339] could not open a connection (try 2)
ERROR: [ 8229] error opening serial port '-1': No such file or directory
ERROR: [ 8229] could not open a connection (try 3)
ERROR: [ 9489] error opening serial port '-1': No such file or directory
ERROR: [ 9489] could not open a connection (try 4)
unable to open the device on port -1
NOTICE: [ 10494] connection opened
ERROR: [ 10494] could not start CEC communications

User avatar
memeka
Posts: 4077
Joined: Mon May 20, 2013 10:22 am
languages_spoken: english
ODROIDs: XU rev2 + eMMC + UART
U3 + eMMC + IO Shield + UART
Contact:

Re: HDMI CEC on odroid XU4

Unread post by memeka » Wed Nov 29, 2017 7:19 am

4.14 uses the new mainline kernel common driver where cec is an input device
Libcec is not yet compatible with it
Please use LIRC to use the new driver (configure cec like a remote control)

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Thu Nov 30, 2017 5:05 pm

memeka wrote:4.14 uses the new mainline kernel common driver where cec is an input device
Libcec is not yet compatible with it
Please use LIRC to use the new driver (configure cec like a remote control)
I tried, but without success.
Perhaps someone in the knowledge will write a howto.
What to use here - source, driver and device.
REMOTE_MODULES=""
REMOTE_DRIVER=""
REMOTE_DEVICE=""

User avatar
memeka
Posts: 4077
Joined: Mon May 20, 2013 10:22 am
languages_spoken: english
ODROIDs: XU rev2 + eMMC + UART
U3 + eMMC + IO Shield + UART
Contact:

Re: HDMI CEC on odroid XU4

Unread post by memeka » Thu Nov 30, 2017 6:19 pm

HK official kernel didn’t include cec driver at all.
They will enable it in the next update
Check if driver is enabled with:
dmesg | grep -i cec

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Thu Nov 30, 2017 8:47 pm

Thank you memeka. Does your kernel fork 4.14 have a cec driver?

User avatar
memeka
Posts: 4077
Joined: Mon May 20, 2013 10:22 am
languages_spoken: english
ODROIDs: XU rev2 + eMMC + UART
U3 + eMMC + IO Shield + UART
Contact:

Re: HDMI CEC on odroid XU4

Unread post by memeka » Thu Nov 30, 2017 8:58 pm

Mangasora wrote:Thank you memeka. Does your kernel fork 4.14 have a cec driver?
Both mine and HK's kernel have CEC driver since it's in mainline kernel.
But HK did not enable in config. They will enable it in their next update.

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Fri Feb 09, 2018 10:47 pm

memeka wrote:Both mine and HK's kernel have CEC driver since it's in mainline kernel.
But HK did not enable in config. They will enable it in their next update.
meveric wrote: Kernel 4.14 is still new and apparently CEC is not configured correctly yet.
The same issue was discussed in other threads already.
Just wait for the next Kernel update and CEC might magically work.
Any news about HDMI-CEC :D

User avatar
rooted
Posts: 6073
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Contact:

Re: HDMI CEC on odroid XU4

Unread post by rooted » Fri Feb 09, 2018 10:51 pm

Mangasora wrote:
memeka wrote:Both mine and HK's kernel have CEC driver since it's in mainline kernel.
But HK did not enable in config. They will enable it in their next update.
meveric wrote: Kernel 4.14 is still new and apparently CEC is not configured correctly yet.
The same issue was discussed in other threads already.
Just wait for the next Kernel update and CEC might magically work.
Any news about HDMI-CEC :D
It's enabled, what is your kernel revision?

Code: Select all

rooted@odroidxu4:~$ uname -a
Linux odroidxu4 4.14.15+ #1 SMP PREEMPT Mon Jan 29 09:01:46 UTC 2018 armv7l armv7l armv7l GNU/Linux
rooted@odroidxu4:~$ zcat /proc/config.gz | grep CEC
CONFIG_TABLET_USB_ACECAD=m
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_MEDIA_CEC_RC is not set
# USB HDMI CEC adapters
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# CONFIG_VIDEO_VIVID_CEC is not set
CONFIG_CEC_PLATFORM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_S5P_CEC=y
rooted@odroidxu4:~$

User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Sat Feb 10, 2018 11:55 am

I think we need to look into the new libcec too if it doesn't work.

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Sun Feb 11, 2018 12:25 am

odroid wrote:I think we need to look into the new libcec too if it doesn't work.
Okay, I'll wait for results. Thanks.

User avatar
Snk
Posts: 275
Joined: Sun Jul 31, 2016 6:43 am
languages_spoken: Portuguese
ODROIDs: XU4 + eMMC 32GB + UART
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Snk » Thu Feb 15, 2018 9:28 am

Is HDMI-CEC already fixed?
Apparently, it was not just me who missed CEC after the Kernel update.

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Sun Feb 18, 2018 6:02 pm


User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Thu Feb 22, 2018 2:11 pm

Update the kernel to 4.14.20 and test the CEC functionality.
cec-client and Kodi should work.

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Thu Feb 22, 2018 11:32 pm

odroid wrote:Update the kernel to 4.14.20 and test the CEC functionality.
cec-client and Kodi should work.
After update :
odroid@odroid:~$ uname -a
Linux odroid 4.14.20-108 #1 SMP PREEMPT Thu Feb 22 00:09:21 UTC 2018 armv7l armv7l armv7l GNU/Linux

Code: Select all

cec-client -1
No device type given. Using 'recording device'
CEC Parser created - libCEC version 4.0.2
opening a connection to the CEC adapter...
DEBUG:   [               2]	Broadcast (F): osd name set to 'Broadcast'
ERROR:   [            3504]	error opening serial port '-1': No such file or directory
ERROR:   [            3504]	could not open a connection (try 1)
ERROR:   [            6340]	error opening serial port '-1': No such file or directory
ERROR:   [            6340]	could not open a connection (try 2)
ERROR:   [            8230]	error opening serial port '-1': No such file or directory
ERROR:   [            8230]	could not open a connection (try 3)
ERROR:   [            9490]	error opening serial port '-1': No such file or directory
ERROR:   [            9490]	could not open a connection (try 4)
unable to open the device on port -1
NOTICE:  [           10495]	connection opened
ERROR:   [           10495]	could not start CEC communications

User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Fri Feb 23, 2018 9:39 am

When we connected a Samsung TV, we could control the TV power with monitor on / off commands at least.
Which display do you test?

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Fri Feb 23, 2018 4:54 pm

My tv is Samsung ES8000.I will reinstall and write about the result. Thanks .

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Fri Feb 23, 2018 7:51 pm

Mangasora wrote:My tv is Samsung ES8000.I will reinstall and write about the result. Thanks .
After the fresh installation and update of Ubuntu 16.04.3 (20171212) the result is the same. What are your steps for activating HDMI-CEC.

User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Fri Feb 23, 2018 8:05 pm

I have no idea at this moment because it is already Friday evening 8:00 PM.
Try this.
https://github.com/mdrjr/5422_bootini/b ... t.ini#L129
If it doesn't work, we will check the CEC functionality again early next week.

User avatar
mad_ady
Posts: 5096
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, N1
Location: Bucharest, Romania
Contact:

Re: HDMI CEC on odroid XU4

Unread post by mad_ady » Fri Feb 23, 2018 11:16 pm

Also try as root.

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Sat Feb 24, 2018 7:19 pm

odroid wrote:I have no idea at this moment because it is already Friday evening 8:00 PM.
Try this.
https://github.com/mdrjr/5422_bootini/b ... t.ini#L129
If it doesn't work, we will check the CEC functionality again early next week.
mad_ady wrote:Also try as root.
This was done with 3.10.y/ 4.9.y kernels. Unfortunately, something else is needed. We'll wait for a patch. :(

User avatar
odroid
Site Admin
Posts: 29348
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: HDMI CEC on odroid XU4

Unread post by odroid » Mon Feb 26, 2018 9:07 pm

The CEC works on Kernel 4.14.20 with Kodi.
viewtopic.php?f=95&t=30285

Mangasora
Posts: 18
Joined: Sun Oct 09, 2016 9:00 pm
languages_spoken: bulgarian
ODROIDs: XU4
Location: Bulgaria
Contact:

Re: HDMI CEC on odroid XU4

Unread post by Mangasora » Mon Feb 26, 2018 11:29 pm

It's working now, thank you.

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 3 guests