[OS] Debian Bullseye

Bernini · Post by **Bernini** » Tue Dec 13, 2022 7:08 am

@Meveric Thanks for keeping Debian current on the XU4!

OK - so I was silly enough to take the jump and install the 22.05 u-boot package onto the eMMC (was running an Armbian setup with Bullseye userland already). Now the eMMC won't boot anymore. I can still boot from SD just fine, but I need the OS to be on my (small) eMMC since I use the SD for storage. Is there a way to restore the u-boot without needing to flash a full Android like in the Hardkernel documentation? Could someone provide me with a copy of their eMMC u-boot (/dev/mmcblk0boot0)? I'd be much obliged.

I did the following with the u-boot image extracted from the 22.05 u-boot Debian package, but to no avail:

Code: Select all

  # echo 0 > /sys/block/mmcblk1boot0/force_ro 
  # dd if=u-boot.bin.hardkernel of=/dev/mmcblk1boot0

That didn't improve things, I found the command below in the official documentation with an added offset, but no difference:

Code: Select all

# dd if=u-boot.bin.hardkernel of=/dev/mmcblk1boot0 bs=512 seek=62

I did try other instructions first so I zeroed out that boot0 partition first to be sure not to have a contaminated boot partition. Either way, it didn't work.

Edit: the git repo for the v2017.05 u-boot has binaries already and a sd_fusing.sh script that puts the first and second stage and whatnot in place, I'm going to give those a shot later on. Will report back.

meveric · Post by **meveric** » Tue Dec 13, 2022 7:50 am

originally the android image was required as the u-boot is in a section of the eMMC where you don't have write permissions for.
So it's a bit more complicated to flash a u-boot on an eMMC.

Also you can't just flash the u-boot itself, it has to be signed, means you can't just take any u-boot but have to sign it first before you can actually use it.

Bernini · Post by **Bernini** » Tue Dec 13, 2022 8:32 pm

I can confirm the sd_fusing script in the Hardkernel u-boot git writes everything to eMMC correctly - stage one, stage two, trust zone, and the actual u-boot - but with 22.05 it does not boot. I haven't hooked up serial to check what's going wrong here. Rewriting the Hardkernel v2017-05 u-boot makes the eMMC boot again.

So, summary: doesn't look like the newer u-boot works from eMMC, like meveric warned. Was worth the try

.

meveric · Post by **meveric** » Wed Dec 14, 2022 5:08 am

Bernini wrote: ↑
Tue Dec 13, 2022 8:32 pm
I can confirm the sd_fusing script in the Hardkernel u-boot git writes everything to eMMC correctly - stage one, stage two, trust zone, and the actual u-boot - but with 22.05 it does not boot. I haven't hooked up serial to check what's going wrong here. Rewriting the Hardkernel v2017-05 u-boot makes the eMMC boot again.

So, summary: doesn't look like the newer u-boot works from eMMC, like meveric warned. Was worth the try .

I did a quick test and both the image and u-boot work fine from eMMC.
I've added the u-boot to the original post and altered the description accordingly.

meveric · Post by **meveric** » Wed Dec 14, 2022 6:01 am

eel wrote: ↑
Tue Dec 13, 2022 5:01 am
I also tried upgrading to kernel 6.0.12 from your Bullseye image. iperf3 improved to 400Mbps on average with spikes up to 600Mbps. It is still not normal performance, but it is 2x what I was getting on 5.19. Do you know if the network drivers are new, or if the performance difference is just from the kernel? By comparison, kernel 4.14 is a stable 930Mbps.

Fun fact:
I just reflashed the image running it off eMMC for testing (doesn't really matter) but if I force iperf3 to run on large cpu cores and run iperf3 in client mode WITHOUT -R option.. see what happens:

Code: Select all

[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   113 MBytes   951 Mbits/sec    0   1.81 MBytes       
[  5]   1.00-2.00   sec   112 MBytes   944 Mbits/sec    0   3.60 MBytes       
[  5]   2.00-3.00   sec   112 MBytes   944 Mbits/sec    0   3.60 MBytes       
[  5]   3.00-4.00   sec   112 MBytes   944 Mbits/sec    0   3.60 MBytes       
[  5]   4.00-5.00   sec   112 MBytes   944 Mbits/sec    0   3.60 MBytes       
[  5]   5.00-6.00   sec   111 MBytes   933 Mbits/sec    0   3.60 MBytes       
[  5]   6.00-7.00   sec   111 MBytes   933 Mbits/sec    0   3.60 MBytes       
[  5]   7.00-8.00   sec   111 MBytes   933 Mbits/sec    0   3.60 MBytes       
[  5]   8.00-9.00   sec   108 MBytes   902 Mbits/sec    0   3.60 MBytes       
[  5]   9.00-10.00  sec   108 MBytes   902 Mbits/sec    0   3.60 MBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.09 GBytes   933 Mbits/sec    0             sender
[  5]   0.00-10.02  sec  1.08 GBytes   930 Mbits/sec                  receiver

Running the same with -R

Code: Select all

[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  80.4 MBytes   674 Mbits/sec                  
[  5]   1.00-2.00   sec  81.2 MBytes   681 Mbits/sec                  
[  5]   2.00-3.00   sec  81.8 MBytes   686 Mbits/sec                  
[  5]   3.00-4.00   sec  81.4 MBytes   683 Mbits/sec                  
[  5]   4.00-5.00   sec  81.2 MBytes   681 Mbits/sec                  
[  5]   5.00-6.00   sec  81.3 MBytes   682 Mbits/sec                  
[  5]   6.00-7.00   sec  81.1 MBytes   681 Mbits/sec                  
[  5]   7.00-8.00   sec  81.5 MBytes   683 Mbits/sec                  
[  5]   8.00-9.00   sec  81.3 MBytes   682 Mbits/sec                  
[  5]   9.00-10.00  sec  81.1 MBytes   681 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   816 MBytes   684 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   812 MBytes   681 Mbits/sec                  receiver

quite interesting but sadly it doesn't change much on real world performance

Bernini · Post by **Bernini** » Wed Dec 14, 2022 6:55 pm

meveric wrote: ↑
Wed Dec 14, 2022 5:08 am
I did a quick test and both the image and u-boot work fine from eMMC.
I've added the u-boot to the original post and altered the description accordingly.

That means I did do something wrong after all

. Thanks for double checking and confirming.

Edit: I'm on Hardkernel's u-boot v2017-05, but I see you're linking to the 2012-07 tree? I used the sd_fusing.sh script from the v2017-05 tree with your 22.05 u-boot. That didn't work.

I'm using the generic Armbian 6.0 ARM multiplatform LPAE kernel and that one works with 2017-05, FWIW.

meveric · Post by **meveric** » Thu Dec 15, 2022 6:17 am

Bernini wrote: ↑
Wed Dec 14, 2022 6:55 pm
Edit: I'm on Hardkernel's u-boot v2017-05, but I see you're linking to the 2012-07 tree? I used the sd_fusing.sh script from the v2017-05 tree with your 22.05 u-boot. That didn't work.

I'm using the generic Armbian 6.0 ARM multiplatform LPAE kernel and that one works with 2017-05, FWIW.

I think you're mixing a couple things up here.
I linked to the sd_fusing.sh tool that you need, as it allows for larger u-boot binaries up to 1mb in size.
The 2017 version was up to 720KB.
It also provides the bl1 and bl2 bootstages required to run this, as well as the trusted firmware blobs, which is why you need this in order to flash any of the more modern u-boots.
I also provide the u-boot binary (u-boot.bin) itself in the first post under the download for the image, which I used.
It is neither a version from 2012 nor 2017 but in fact a 2020.10 u-boot binary, as the u-boot itself has a version.

The date of the "package" has absolutely nothing to do with the actual u-boot.
What you call "my 2022.05" u-boot is actually the u-boot from HardKernel which is based around a u-boot version 2017.05 it is older, but works for the legacy images which still use uInitrd and zImage instead of vmlinuz-<kernel-version> and standard initrd.img-<kernel-version>.
One of the reasons why I do use a more modern u-boot is to actually support this.
Which is also the reason why "my 2022.05" doesn't work, as it's in fact a 2017.05 u-boot which is to old to run this image.

My Kernel is also an Kernel 6.0 multiplatform LPAE image, difference is, it's running on a newer version of u-boot with vmlinuz-6.0.12-armmp-lpae and initrd.img-6.0.12-armmp-lpae instead of legacy uInitrd and zImage.

Seeing that the 2017.05 "sd_fusing.sh" script also supports up to 720KB, means it would also work perfectly fine with the u-boot I provided, as it's less than 720KB.

just for your information:
https://github.com/u-boot/u-boot

this is where you can find the "official" u-boot and if you check under "tags" you can see the different versions of the u-boot.
The u-boot from HardKernel for the XU3/XU4 is base around u-boot version 2017.05, the one I used is 2020.10, as I found later versions had some issues and I was too lazy to try to debug what could be wrong.

eel · Post by **eel** » Thu Dec 15, 2022 11:55 am

meveric wrote: ↑
Wed Dec 14, 2022 6:01 am
quite interesting but sadly it doesn't change much on real world performance

Thank you for all the work that you are putting into this. I want to report that there may be some instability in the 6.0.12 kernel/drivers. Under heavy network usage, my XU4 locks up and stops responding. I don't know exactly what is happening, or if it is definitely from the kernel/drivers, but I need to do a hard reset every time and was able to replicate it several times. I have not experienced this behavior under 4.14 or 5.19.

meveric · Post by **meveric** » Fri Dec 16, 2022 3:07 am

pninbb wrote: ↑
Mon Dec 12, 2022 6:56 pm
It's me again !
I reinstalled the system and I'm basically stuck in the same place.
After installing LAMP, any application that (obviously) manages the appropriate ports during installation by itself will work.
But I can't find a way to explicitly open a port, for example to get phpmyadmin running.
I've tried several firewalls (ufw, firewalls, shorewall), all lead to error messages or even SSH exclusion (ufw)!
Even trying to uninstall iptables and install nftables instead is unsuccessful; kernel modules seem to be missing.
When can we expect the kernel update?
Thank you very much.

I've uploaded a new Kernel which should have the missing modules available.
I can at least start firewalld without issues. Please let me know if it works with the filters you want to use.

iceskywolker · Post by **iceskywolker** » Tue Dec 27, 2022 9:14 pm

Hi All,
Am I missing something or all provided kernels lacks of overlay2, aufs support?
Without this docker won't run.

meveric · Post by **meveric** » Tue Dec 27, 2022 10:43 pm

iceskywolker wrote: ↑
Tue Dec 27, 2022 9:14 pm
Hi All,
Am I missing something or all provided kernels lacks of overlay2, aufs support?
Without this docker won't run.

I'll check which other options for Docker are missing and try to add them to the next Kernel build.

meveric · Post by **meveric** » Wed Dec 28, 2022 8:06 am

Just a small status report:

Code: Select all

root@odroid-bullseye:~# bash check-config.sh 
info: reading kernel config from /proc/config.gz ...

Generally Necessary:
- cgroup hierarchy: cgroupv2
  Controllers:
  - cpu: available
  - cpuset: available
  - io: available
  - memory: available
  - pids: available
- CONFIG_NAMESPACES: enabled
- CONFIG_NET_NS: enabled
- CONFIG_PID_NS: enabled
- CONFIG_IPC_NS: enabled
- CONFIG_UTS_NS: enabled
- CONFIG_CGROUPS: enabled
- CONFIG_CGROUP_CPUACCT: enabled
- CONFIG_CGROUP_DEVICE: enabled
- CONFIG_CGROUP_FREEZER: enabled
- CONFIG_CGROUP_SCHED: enabled
- CONFIG_CPUSETS: enabled
- CONFIG_MEMCG: enabled
- CONFIG_KEYS: enabled
- CONFIG_VETH: enabled (as module)
- CONFIG_BRIDGE: enabled (as module)
- CONFIG_BRIDGE_NETFILTER: enabled (as module)
- CONFIG_IP_NF_FILTER: enabled (as module)
- CONFIG_IP_NF_TARGET_MASQUERADE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_IPVS: enabled (as module)
- CONFIG_NETFILTER_XT_MARK: enabled (as module)
- CONFIG_IP_NF_NAT: enabled (as module)
- CONFIG_NF_NAT: enabled (as module)
- CONFIG_POSIX_MQUEUE: enabled
- CONFIG_CGROUP_BPF: enabled

Optional Features:
- CONFIG_USER_NS: enabled
- CONFIG_SECCOMP: enabled
- CONFIG_SECCOMP_FILTER: enabled
- CONFIG_CGROUP_PIDS: enabled
- CONFIG_MEMCG_SWAP: missing
    (cgroup swap accounting is currently enabled)
- CONFIG_BLK_CGROUP: enabled
- CONFIG_BLK_DEV_THROTTLING: enabled
- CONFIG_CGROUP_PERF: enabled
- CONFIG_CGROUP_HUGETLB: missing
- CONFIG_NET_CLS_CGROUP: missing
- CONFIG_CGROUP_NET_PRIO: enabled
- CONFIG_CFS_BANDWIDTH: enabled
- CONFIG_FAIR_GROUP_SCHED: enabled
- CONFIG_RT_GROUP_SCHED: enabled
- CONFIG_IP_NF_TARGET_REDIRECT: enabled (as module)
- CONFIG_IP_VS: enabled (as module)
- CONFIG_IP_VS_NFCT: enabled
- CONFIG_IP_VS_PROTO_TCP: enabled
- CONFIG_IP_VS_PROTO_UDP: enabled
- CONFIG_IP_VS_RR: enabled (as module)
- CONFIG_SECURITY_SELINUX: enabled
- CONFIG_SECURITY_APPARMOR: enabled
- CONFIG_EXT3_FS: missing
- CONFIG_EXT3_FS_XATTR: missing
- CONFIG_EXT3_FS_POSIX_ACL: missing
- CONFIG_EXT3_FS_SECURITY: missing
    (enable these ext3 configs if you are using ext3 as backing filesystem)
- CONFIG_EXT4_FS: enabled (as module)
- CONFIG_EXT4_FS_POSIX_ACL: enabled
- CONFIG_EXT4_FS_SECURITY: enabled
- Network Drivers:
  - "overlay":
    - CONFIG_VXLAN: enabled (as module)
    - CONFIG_BRIDGE_VLAN_FILTERING: missing
      Optional (for encrypted networks):
      - CONFIG_CRYPTO: enabled
      - CONFIG_CRYPTO_AEAD: enabled
      - CONFIG_CRYPTO_GCM: enabled
      - CONFIG_CRYPTO_SEQIV: enabled (as module)
      - CONFIG_CRYPTO_GHASH: enabled
      - CONFIG_XFRM: enabled
      - CONFIG_XFRM_USER: enabled (as module)
      - CONFIG_XFRM_ALGO: enabled
      - CONFIG_INET_ESP: enabled (as module)
  - "ipvlan":
    - CONFIG_IPVLAN: enabled (as module)
  - "macvlan":
    - CONFIG_MACVLAN: enabled (as module)
    - CONFIG_DUMMY: enabled (as module)
  - "ftp,tftp client in container":
    - CONFIG_NF_NAT_FTP: enabled (as module)
    - CONFIG_NF_CONNTRACK_FTP: enabled (as module)
    - CONFIG_NF_NAT_TFTP: enabled (as module)
    - CONFIG_NF_CONNTRACK_TFTP: enabled (as module)
- Storage Drivers:
  - "aufs":
    - CONFIG_AUFS_FS: missing
  - "btrfs":
    - CONFIG_BTRFS_FS: enabled (as module)
    - CONFIG_BTRFS_FS_POSIX_ACL: enabled
  - "devicemapper":
    - CONFIG_BLK_DEV_DM: enabled (as module)
    - CONFIG_DM_THIN_PROVISIONING: enabled (as module)
  - "overlay":
    - CONFIG_OVERLAY_FS: enabled (as module)
  - "zfs":
    - /dev/zfs: missing
    - zfs command: missing
    - zpool command: missing

Limits:
- /proc/sys/kernel/keys/root_maxkeys: 1000000

So Docker should be fine now.
Still have to update the packages though so probably tomorrow.

ChicoDeGoma · Post by **ChicoDeGoma** » Sat Dec 31, 2022 4:39 pm

Just to state the obvious:

If I wanted to host something and wanted to have the full gigabit speed, I should go buster (one of your experimental images) and upgrade from there with /etc/apt/sources.list edits, right?

meveric · Post by **meveric** » Sun Jan 01, 2023 4:34 am

yes you can do that, but you can not upgrade the Kernel or use Panfrost GPU drivers.

ChicoDeGoma · Post by **ChicoDeGoma** » Sun Jan 01, 2023 11:56 pm

I'm kinda okay with that, mostly because I've never flashed u-boot and I'm not really sure of the process.
I've read I would have to boot the sdcard, then use the script from the post you linked a little above into the card but still I'm not really confident.

meveric · Post by **meveric** » Mon Jan 02, 2023 12:03 am

ChicoDeGoma wrote: ↑
Sun Jan 01, 2023 11:56 pm
I'm kinda okay with that, mostly because I've never flashed u-boot and I'm not really sure of the process.
I've read I would have to boot the sdcard, then use the script from the post you linked a little above into the card but still I'm not really confident.

still wouldn't be enough.. lots of changes since then.. new boot partition new scripts and so on.. just updating would not work.

ChicoDeGoma · Post by **ChicoDeGoma** » Mon Jan 02, 2023 11:56 am

meveric wrote: ↑
Mon Jan 02, 2023 12:03 am

ChicoDeGoma wrote: ↑
Sun Jan 01, 2023 11:56 pm
I'm kinda okay with that, mostly because I've never flashed u-boot and I'm not really sure of the process.
I've read I would have to boot the sdcard, then use the script from the post you linked a little above into the card but still I'm not really confident.
still wouldn't be enough.. lots of changes since then.. new boot partition new scripts and so on.. just updating would not work.

Sorry, I meant that if I went to go with a fresh install of Bullseye, I would have to start updating the u-boot, and I've never done it before.
I didn't mean updating from a previous version.

meveric · Post by **meveric** » Mon Jan 02, 2023 4:13 pm

ChicoDeGoma wrote: ↑
Mon Jan 02, 2023 11:56 am
Sorry, I meant that if I went to go with a fresh install of Bullseye, I would have to start updating the u-boot, and I've never done it before.
I didn't mean updating from a previous version.

If you flash the image directly on an SD card it will work out of the box, only if you want to run it from eMMC you would have to flash the u-boot as well.

ChicoDeGoma · Post by **ChicoDeGoma** » Mon Jan 02, 2023 4:25 pm

Yep, that was my understanding. And I do want to flash it into the eMMC, but I have to read up a little bit since I'm not understanding it pretty well/

odro-volti · Post by **odro-volti** » Wed Jan 04, 2023 1:57 am

Happy New Year altogether!

I started playing around a litle more in detail now with the Bullseye image. I normally disable ipv6 in kernel, so I added to

/boot/config.ini in the very end

Code: Select all

ipv6.disable=1

which normally works fine as a kernel parameter in other distros.

But after a reboot the machine came back with

Code: Select all

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1000
    link/tunnel6 :: brd :: permaddr 6aeb:b049:a97f::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:1e:06:39:cc:fc brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.124/24 brd 10.0.0.256 scope global dynamic eth0
       valid_lft 7169sec preferred_lft 7169sec

Any ideas what I missed here?

meveric · Post by **meveric** » Wed Jan 04, 2023 2:14 am

Can you post the output of cat /proc/cmdline

odro-volti · Post by **odro-volti** » Wed Jan 04, 2023 2:15 am

here we go...

Code: Select all

# cat /proc/cmdline
root=UUID=e139ce78-9841-40fe-8823-96a304a09859 console=ttySAC2,115200n8 console=tty0 net.ifnames=0 fsck.mode=auto fsck.repair=yes ro earlycon clk_ignore_unused no_console_suspend   "drm.edid_firmware=edid/800x600.bin"

meveric · Post by **meveric** » Wed Jan 04, 2023 2:17 am

In the command line there is no entry for your parameter.

Looks like you might have made an error in the config.ini
Can you show that as well?

odro-volti · Post by **odro-volti** » Wed Jan 04, 2023 2:25 am

Code: Select all

# cat /boot/config.ini
; Set bootlable for petitboot (where supported)
; bootlabel="Debian Bullseye"

; Set ethernet adapter MAC address (where supported)
; ethermac=ee:2e:52:60:d1:73

; overwrite Kernel version to be loaded
; fk_kvers="5.13.4-arm64"

; Maximum number of CPU cores 1..4
; maxcpus=4

; location of root filesystem (e.g. /dev/mmcblk1p2 or UUID=560b0c5e-cc70-46e6-a38a-d7ab766e01c7)
; rootfs="UUID=f7871379-95f6-4bc7-9e83-52c848bc7456"

; Device Tree Overlay
; some available overlays hktft32 hktft35 pcf8563 spi0 sx865x-i2c1 w1-gpio_p15 w1-gpio_p22 uart0 uart1
; check /usr/lib/linux-image-<Kernel-version>/overlays for full list
; fk_overlays=spi0 pcf8563 sx865x-i2c1
; fk_overlays=hktft35 sx865x-i2c1

; Video Resolution
; You can specifiy a desired resolution
; Please note: this only applies to framebuffer and may be overwritten from a Desktop that you have installed
; https://www.kernel.org/doc/Documentation/fb/modedb.txt
; examples:
; ODROID-VU forced resolution
; videoconfig="video=HDMI-A-1:1280x800@60"
; -----------------------------------------------
; ODROID-VU forced EDID
; videoconfig="drm.edid_firmware=edid/1280x800.bin"
; -----------------------------------------------
; 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
; videoconfig="video=HDMI-A-1:1920x1080@60"
; -----------------------------------------------
; 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
; videoconfig="drm.edid_firmware=edid/1920x1080.bin"
; -----------------------------------------------
; 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
; videoconfig="video=HDMI-A-1:1920x1080@50"
; -----------------------------------------------
; 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
; videoconfig="drm.edid_firmware=edid/1920x1080_50hz.bin"
; -----------------------------------------------
; 1440x900 with monitor provided EDID information.
; videoconfig="video=HDMI-A-1:1440x900@60"
; -----------------------------------------------
; 1440x900 without monitor data using generic information 
; videoconfig="drm.edid_firmware=edid/1440x900.bin"
; -----------------------------------------------
; 1280x1024 without monitor data using generic information
; videoconfig="drm.edid_firmware=edid/1280x1024.bin"
; -----------------------------------------------
; 1280x720 (720P) with monitor provided EDID information. (720p-edid)
; videoconfig="video=1280x720@60"
; -----------------------------------------------
; 1280x720 (720P) without monitor data using generic information (720p-noedid)
; videoconfig="drm.edid_firmware=edid/1280x720.bin"
; -----------------------------------------------
; 1024x768 without monitor data using generic information
; videoconfig="drm.edid_firmware=edid/1024x768.bin"
; -----------------------------------------------
; 1024x600 without monitor data using generic information (ODROID VU7+)
; videoconfig="drm.edid_firmware=edid/1024x600.bin"
; -----------------------------------------------
; 800x600 without monitor data using generic information 
videoconfig="drm.edid_firmware=edid/800x600.bin"
; -----------------------------------------------
; 800x480 without monitor data using generic information (ODROID 7")
; videoconfig="drm.edid_firmware=edid/800x480.bin"
; -----------------------------------------------
; 720x576 without monitor data using generic information 
; videoconfig="drm.edid_firmware=edid/720x576.bin"
; -----------------------------------------------
; 720x480 without monitor data using generic information 
; videoconfig="drm.edid_firmware=edid/720x480.bin"
; -----------------------------------------------
; 640x480 without monitor data using generic information
; videoconfig="drm.edid_firmware=edid/640x480.bin"

; Rootdelay:
; rootdelay defines how long the Kernel should wait before continue booting
; This may be required if the Kernel/Initramfs is waiting for a attached USB device to be ready
; rootdelay will wait for X seconds before continuing the boot process
; rootdelay=60

; --- HDMI / DVI Mode Selection ---
; ------------------------------------------
;
; default: hdmi
;
; - HDMI Mode
; vout="hdmi"
; - DVI Mode (disables sound over HDMI as per DVI compat)
; vout="dvi"

; HDMI Hot Plug detection
;
;------------------------------------------------------------------------------
;
; Forces the HDMI subsystem to ignore the check if the cable is connected or 
; not.
; false : disable the detection and force it as connected.
; true : let cable, board and monitor decide the connection status.
; 
; default: true
; 
;------------------------------------------------------------------------------
; HPD="true"


; Extra bootargs:
; Here you can define your own bootargs in case something is missing
; extraargs=apparmor=1 security=apparmor
ipv6.disable=1

odro-volti · Post by **odro-volti** » Wed Jan 04, 2023 2:28 am

...I also tried it with a semicolon (;) in front of the line with "ipv6.disable=1", same result...

meveric · Post by **meveric** » Wed Jan 04, 2023 2:28 am

Yep, that doesn't work.

You need to put it like this:
extraargs=ipv6.disable=1

odro-volti · Post by **odro-volti** » Wed Jan 04, 2023 2:32 am

Semicolon needed or not?

Edit: Works without semicolon!

Many thanks!

meveric · Post by **meveric** » Wed Jan 04, 2023 2:34 am

Semicolon is for comments and therefore ignored.

So, no semicolon

odro-volti · Post by **odro-volti** » Fri Jan 06, 2023 12:09 am

Hello again!

I switched now some of my NAS servers (mdadm RAID1, smb, USB3-Sata adapters, USB3-M.2 adapter in one case) from Buster to Bullseye, no problem so far, except the throughput for smb has collapsed to raspberry pi (USB2) performance. Ceterum censeo I have with Bullseye 8-9 MiB/s over smb, while with the absolute same hardware, cables etc. I had with the older OS 25 to 40 MiB/s.

That's a bt frustrating and in dmesg I don't see any hint like "Superspeed disabled" or something

Code: Select all

# dmesg
[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 6.1.1-armmp-lpae (root@loki) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #exynos5 SMP PREEMPT Tue Dec 27 20:10:55 UTC 2022
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel ODROID XU4
[    0.000000] earlycon: exynos4210 at MMIO 0x12c20000 (options '115200n8')
[    0.000000] printk: bootconsole [exynos4210] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 96 MiB at 0xb8800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000be9fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000be9fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000be9fffff]
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 18 pages/cpu s42420 r8192 d23116 u73728
[    0.000000] pcpu-alloc: s42420 r8192 d23116 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line:  root=UUID=e139ce78-9841-40fe-8823-96a304a09859 console=ttySAC2,115200n8 console=tty0 net.ifnames=0 fsck.mode=auto fsck.repair=yes ro earlycon clk_ignore_unused no_console_suspend   "drm.edid_firmware=edid/800x600.bin"    ipv6.disable=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1915464K/2074624K available (16384K kernel code, 2075K rwdata, 4884K rodata, 1024K init, 6750K bss, 60856K reserved, 98304K cma-reserved, 1189888K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] Running RCU self tests
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU lockdep checking is enabled.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.007802] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57
[    0.017105] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.021750] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.032500] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.040465] Ignoring duplicate/late registration of read_current_timer delay
[    0.049275] Console: colour dummy device 80x30
[    0.052306] printk: console [tty0] enabled
[    0.056432] printk: bootconsole [exynos4210] disabled
[    0.061400] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.061584] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.061694] ... MAX_LOCK_DEPTH:          48
[    0.061804] ... MAX_LOCKDEP_KEYS:        8192
[    0.061918] ... CLASSHASH_SIZE:          4096
[    0.062033] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.062149] ... MAX_LOCKDEP_CHAINS:      65536
[    0.062265] ... CHAINHASH_SIZE:          32768
[    0.062381]  memory used by lock dependency info: 4061 kB
[    0.062516]  memory used for stack traces: 2112 kB
[    0.062639]  per task-struct memory footprint: 1536 bytes
[    0.062862] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.063120] pid_max: default: 32768 minimum: 301
[    0.063771] LSM: Security Framework initializing
[    0.063920] Yama: becoming mindful.
[    0.064667] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.064876] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.071396] CPU: Testing write buffer coherency: ok
[    0.074470] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.080436] cblist_init_generic: Setting adjustable number of callback queues.
[    0.080896] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.081788] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.082623] Running RCU-tasks wait API self tests
[    0.187200] Setting up static identity map for 0x40100000 - 0x40100060
[    0.188679] ARM CCI driver probed
[    0.189644] Exynos MCPM support installed
[    0.191091] rcu: Hierarchical SRCU implementation.
[    0.191279] rcu:     Max phase no-delay instances is 1000.
[    0.200497] smp: Bringing up secondary CPUs ...
[    0.205633] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.211723] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.216776] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.221566] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.221588] CPU4: detected I-Cache line size mismatch, workaround enabled
[    0.221600] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.222562] CPU4: Spectre BHB: enabling loop workaround for all CPUs
[    0.227559] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.227577] CPU5: detected I-Cache line size mismatch, workaround enabled
[    0.227588] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.229116] Callback from call_rcu_tasks_trace() invoked.
[    0.233280] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.233300] CPU6: detected I-Cache line size mismatch, workaround enabled
[    0.233311] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.238697] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.238716] CPU7: detected I-Cache line size mismatch, workaround enabled
[    0.238726] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.240144] smp: Brought up 1 node, 8 CPUs
[    0.240359] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.240611] CPU: All CPU(s) started in HYP mode.
[    0.240801] CPU: Virtualization extensions available.
[    0.246502] devtmpfs: initialized
[    0.393284] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.397319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.397621] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.402010] pinctrl core: initialized pinctrl subsystem
[    0.406895] Callback from call_rcu_tasks() invoked.
[    0.412390] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.422002] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.432774] audit: initializing netlink subsys (disabled)
[    0.433831] audit: type=2000 audit(0.390:1): state=initialized audit_enabled=0 res=1
[    0.437047] thermal_sys: Registered thermal governor 'fair_share'
[    0.437076] thermal_sys: Registered thermal governor 'bang_bang'
[    0.437254] thermal_sys: Registered thermal governor 'step_wise'
[    0.437425] thermal_sys: Registered thermal governor 'user_space'
[    0.437984] cpuidle: using governor menu
[    0.439654] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.439936] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.589510] gpio_stub_drv gpiochip0: (gpy7): added GPIO chardev (254:0)
[    0.589542] gpio_stub_drv gpiochip0: registered GPIOs 0 to 7 on gpy7
[    0.590653] gpio_stub_drv gpiochip1: (gpx0): added GPIO chardev (254:1)
[    0.590678] gpio_stub_drv gpiochip1: registered GPIOs 8 to 15 on gpx0
[    0.591802] gpio_stub_drv gpiochip2: (gpx1): added GPIO chardev (254:2)
[    0.591827] gpio_stub_drv gpiochip2: registered GPIOs 16 to 23 on gpx1
[    0.592908] gpio_stub_drv gpiochip3: (gpx2): added GPIO chardev (254:3)
[    0.592932] gpio_stub_drv gpiochip3: registered GPIOs 24 to 31 on gpx2
[    0.594130] gpio_stub_drv gpiochip4: (gpx3): added GPIO chardev (254:4)
[    0.594154] gpio_stub_drv gpiochip4: registered GPIOs 32 to 39 on gpx3
[    0.602839] gpio_stub_drv gpiochip5: (gpc0): added GPIO chardev (254:5)
[    0.602866] gpio_stub_drv gpiochip5: registered GPIOs 40 to 47 on gpc0
[    0.603945] gpio_stub_drv gpiochip6: (gpc1): added GPIO chardev (254:6)
[    0.603970] gpio_stub_drv gpiochip6: registered GPIOs 48 to 55 on gpc1
[    0.605104] gpio_stub_drv gpiochip7: (gpc2): added GPIO chardev (254:7)
[    0.605129] gpio_stub_drv gpiochip7: registered GPIOs 56 to 62 on gpc2
[    0.606204] gpio_stub_drv gpiochip8: (gpc3): added GPIO chardev (254:8)
[    0.606228] gpio_stub_drv gpiochip8: registered GPIOs 63 to 66 on gpc3
[    0.607340] gpio_stub_drv gpiochip9: (gpc4): added GPIO chardev (254:9)
[    0.607364] gpio_stub_drv gpiochip9: registered GPIOs 67 to 68 on gpc4
[    0.608508] gpio_stub_drv gpiochip10: (gpd1): added GPIO chardev (254:10)
[    0.608532] gpio_stub_drv gpiochip10: registered GPIOs 69 to 76 on gpd1
[    0.609649] gpio_stub_drv gpiochip11: (gpy0): added GPIO chardev (254:11)
[    0.609673] gpio_stub_drv gpiochip11: registered GPIOs 77 to 82 on gpy0
[    0.610749] gpio_stub_drv gpiochip12: (gpy1): added GPIO chardev (254:12)
[    0.610772] gpio_stub_drv gpiochip12: registered GPIOs 83 to 86 on gpy1
[    0.611886] gpio_stub_drv gpiochip13: (gpy2): added GPIO chardev (254:13)
[    0.611909] gpio_stub_drv gpiochip13: registered GPIOs 87 to 92 on gpy2
[    0.613013] gpio_stub_drv gpiochip14: (gpy3): added GPIO chardev (254:14)
[    0.613037] gpio_stub_drv gpiochip14: registered GPIOs 93 to 100 on gpy3
[    0.614150] gpio_stub_drv gpiochip15: (gpy4): added GPIO chardev (254:15)
[    0.614174] gpio_stub_drv gpiochip15: registered GPIOs 101 to 108 on gpy4
[    0.615249] gpio_stub_drv gpiochip16: (gpy5): added GPIO chardev (254:16)
[    0.615274] gpio_stub_drv gpiochip16: registered GPIOs 109 to 116 on gpy5
[    0.616367] gpio_stub_drv gpiochip17: (gpy6): added GPIO chardev (254:17)
[    0.616390] gpio_stub_drv gpiochip17: registered GPIOs 117 to 124 on gpy6
[    0.623312] gpio_stub_drv gpiochip18: (gpe0): added GPIO chardev (254:18)
[    0.623338] gpio_stub_drv gpiochip18: registered GPIOs 125 to 132 on gpe0
[    0.624416] gpio_stub_drv gpiochip19: (gpe1): added GPIO chardev (254:19)
[    0.624441] gpio_stub_drv gpiochip19: registered GPIOs 133 to 134 on gpe1
[    0.625557] gpio_stub_drv gpiochip20: (gpf0): added GPIO chardev (254:20)
[    0.625581] gpio_stub_drv gpiochip20: registered GPIOs 135 to 140 on gpf0
[    0.626661] gpio_stub_drv gpiochip21: (gpf1): added GPIO chardev (254:21)
[    0.626685] gpio_stub_drv gpiochip21: registered GPIOs 141 to 148 on gpf1
[    0.627863] gpio_stub_drv gpiochip22: (gpg0): added GPIO chardev (254:22)
[    0.627887] gpio_stub_drv gpiochip22: registered GPIOs 149 to 156 on gpg0
[    0.628966] gpio_stub_drv gpiochip23: (gpg1): added GPIO chardev (254:23)
[    0.628990] gpio_stub_drv gpiochip23: registered GPIOs 157 to 164 on gpg1
[    0.630122] gpio_stub_drv gpiochip24: (gpg2): added GPIO chardev (254:24)
[    0.630146] gpio_stub_drv gpiochip24: registered GPIOs 165 to 166 on gpg2
[    0.631277] gpio_stub_drv gpiochip25: (gpj4): added GPIO chardev (254:25)
[    0.631301] gpio_stub_drv gpiochip25: registered GPIOs 167 to 170 on gpj4
[    0.640576] gpio_stub_drv gpiochip26: (gpa0): added GPIO chardev (254:26)
[    0.640601] gpio_stub_drv gpiochip26: registered GPIOs 171 to 178 on gpa0
[    0.641709] gpio_stub_drv gpiochip27: (gpa1): added GPIO chardev (254:27)
[    0.641734] gpio_stub_drv gpiochip27: registered GPIOs 179 to 184 on gpa1
[    0.642813] gpio_stub_drv gpiochip28: (gpa2): added GPIO chardev (254:28)
[    0.642837] gpio_stub_drv gpiochip28: registered GPIOs 185 to 192 on gpa2
[    0.643951] gpio_stub_drv gpiochip29: (gpb0): added GPIO chardev (254:29)
[    0.643975] gpio_stub_drv gpiochip29: registered GPIOs 193 to 197 on gpb0
[    0.645051] gpio_stub_drv gpiochip30: (gpb1): added GPIO chardev (254:30)
[    0.645074] gpio_stub_drv gpiochip30: registered GPIOs 198 to 202 on gpb1
[    0.646188] gpio_stub_drv gpiochip31: (gpb2): added GPIO chardev (254:31)
[    0.646213] gpio_stub_drv gpiochip31: registered GPIOs 203 to 206 on gpb2
[    0.647288] gpio_stub_drv gpiochip32: (gpb3): added GPIO chardev (254:32)
[    0.647312] gpio_stub_drv gpiochip32: registered GPIOs 207 to 214 on gpb3
[    0.648488] gpio_stub_drv gpiochip33: (gpb4): added GPIO chardev (254:33)
[    0.648512] gpio_stub_drv gpiochip33: registered GPIOs 215 to 216 on gpb4
[    0.649593] gpio_stub_drv gpiochip34: (gph0): added GPIO chardev (254:34)
[    0.649616] gpio_stub_drv gpiochip34: registered GPIOs 217 to 224 on gph0
[    0.660950] gpio_stub_drv gpiochip35: (gpz): added GPIO chardev (254:35)
[    0.660976] gpio_stub_drv gpiochip35: registered GPIOs 225 to 231 on gpz
[    0.685154] EXYNOS5420 PMU initialized
[    1.036177] iommu: Default domain type: Translated 
[    1.036329] iommu: DMA domain TLB invalidation policy: strict mode 
[    1.039408] SCSI subsystem initialized
[    1.039778] libata version 3.00 loaded.
[    1.040936] usbcore: registered new interface driver usbfs
[    1.041372] usbcore: registered new interface driver hub
[    1.041811] usbcore: registered new device driver usb
[    1.044913] s3c-i2c 12c80000.i2c: slave address 0x00
[    1.045074] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[    1.046734] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[    1.048451] pps_core: LinuxPPS API ver. 1 registered
[    1.048596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.048968] PTP clock support registered
[    1.051773] Advanced Linux Sound Architecture Driver Initialized.
[    1.055709] nfc: nfc_init: NFC Core ver 0.1
[    1.056113] NET: Registered PF_NFC protocol family
[    1.058292] clocksource: Switched to clocksource mct-frc
[    1.061911] VFS: Disk quotas dquot_6.6.0
[    1.062231] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.119608] NET: Registered PF_INET protocol family
[    1.120563] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.125369] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear)
[    1.126096] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.126369] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.127049] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear)
[    1.131065] TCP: Hash tables configured (established 8192 bind 8192)
[    1.131860] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)
[    1.132357] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)
[    1.133644] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.136621] RPC: Registered named UNIX socket transport module.
[    1.136857] RPC: Registered udp transport module.
[    1.136999] RPC: Registered tcp transport module.
[    1.137140] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.140091] Trying to unpack rootfs image as initramfs...
[    1.143184] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.147478] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.159566] Initialise system trusted keyrings
[    1.161380] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.215202] zbud: loaded
[    1.221310] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.225930] NFS: Registering the id_resolver key type
[    1.226217] Key type id_resolver registered
[    1.226417] Key type id_legacy registered
[    1.227128] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.227367] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.232889] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.235770] JFS: nTxBlock = 8192, nTxLock = 65536
[    1.250507] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[    1.261162] ocfs2: Registered cluster interface o2cb
[    1.262629] OCFS2 User DLM kernel interface loaded
[    1.272929] gfs2: GFS2 installed
[    1.279343] Key type asymmetric registered
[    1.279543] Asymmetric key parser 'x509' registered
[    1.280956] bounce: pool size: 64 pages
[    1.281839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.283017] io scheduler mq-deadline registered
[    1.283160] io scheduler kyber registered
[    1.284540] io scheduler bfq registered
[    1.300866] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator
[    1.304897] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator
[    1.305956] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator
[    1.308275] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator
[    1.309342] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator
[    1.341358] dma-pl330 3880000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.341582] dma-pl330 3880000.dma-controller:        DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    1.359375] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.359598] dma-pl330 121a0000.dma-controller:       DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.367113] dma-pl330 3880000.dma-controller: PM domain MAU will not be powered off
[    1.377472] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.377694] dma-pl330 121b0000.dma-controller:       DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.384030] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.384251] dma-pl330 10800000.dma-controller:       DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.774396] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.787033] Serial: AMBA driver
[    1.788425] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 123, base_baud = 0) is a S3C6400/10
[    2.149153] Freeing initrd memory: 8456K
[    2.151154] printk: console [ttySAC2] enabled
[    2.978890] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[    2.990089] exynos-mixer 14450000.mixer: Adding to iommu group 0
[    3.052309] brd: module loaded
[    3.123461] loop: module loaded
[    3.135976] mdio_bus fixed-0: GPIO lookup for consumer reset
[    3.136005] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    3.136103] mdio_bus fixed-0: No GPIO consumer reset found
[    3.139186] usbcore: registered new interface driver r8152
[    3.143618] usbcore: registered new interface driver asix
[    3.149003] usbcore: registered new interface driver ax88179_178a
[    3.154984] usbcore: registered new interface driver cdc_ether
[    3.160923] usbcore: registered new interface driver smsc75xx
[    3.166580] usbcore: registered new interface driver smsc95xx
[    3.172287] usbcore: registered new interface driver net1080
[    3.177856] usbcore: registered new interface driver cdc_subset
[    3.183857] usbcore: registered new interface driver zaurus
[    3.189455] usbcore: registered new interface driver cdc_ncm
[    3.194935] usbcore: registered new interface driver r8153_ecm
[    3.206526] exynos-ehci 12110000.usb: GPIO lookup for consumer samsung,vbus
[    3.206554] exynos-ehci 12110000.usb: using device tree for GPIO lookup
[    3.206603] of_get_named_gpiod_flags: can't parse 'samsung,vbus-gpios' property of node '/soc/usb@12110000[0]'
[    3.206691] of_get_named_gpiod_flags: can't parse 'samsung,vbus-gpio' property of node '/soc/usb@12110000[0]'
[    3.206765] exynos-ehci 12110000.usb: using lookup tables for GPIO lookup
[    3.206797] exynos-ehci 12110000.usb: No GPIO consumer samsung,vbus found
[    3.208600] phy phy-12130000.phy.5: phy_power_on was called before phy_init
[    3.214400] exynos-ehci 12110000.usb: EHCI Host Controller
[    3.220437] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    3.230711] exynos-ehci 12110000.usb: irq 124, io mem 0x12110000
[    3.258353] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    3.264773] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    3.271980] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.279640] usb usb1: Product: EHCI Host Controller
[    3.283940] usb usb1: Manufacturer: Linux 6.1.1-armmp-lpae ehci_hcd
[    3.290248] usb usb1: SerialNumber: 12110000.usb
[    3.299740] hub 1-0:1.0: USB hub found
[    3.302436] hub 1-0:1.0: 3 ports detected
[    3.313897] phy phy-12130000.phy.5: phy_power_on was called before phy_init
[    3.319683] exynos-ohci 12120000.usb: USB Host Controller
[    3.325050] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    3.333669] exynos-ohci 12120000.usb: irq 124, io mem 0x12120000
[    3.423322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[    3.430479] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.437553] usb usb2: Product: USB Host Controller
[    3.442383] usb usb2: Manufacturer: Linux 6.1.1-armmp-lpae ohci_hcd
[    3.448619] usb usb2: SerialNumber: 12120000.usb
[    3.456389] hub 2-0:1.0: USB hub found
[    3.459043] hub 2-0:1.0: 3 ports detected
[    3.470171] usbcore: registered new interface driver uas
[    3.474492] usbcore: registered new interface driver usb-storage
[    3.482905] UDC core: g_ether: couldn't find an available UDC
[    3.489397] mousedev: PS/2 mouse device common for all mice
[    3.502060] i2c_dev: i2c /dev entries driver
[    3.593938] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[    3.630756] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    3.793003] s5m-rtc s2mps14-rtc: registered as rtc0
[    3.799071] s5m-rtc s2mps14-rtc: setting system clock to 2023-01-05T10:27:28 UTC (1672914448)
[    3.808264] s2mps11-clk s2mps11-clk: DMA mask not set
[    3.845347] thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
[    3.851495] thermal_sys: Failed to find thermal zone for tmu id=0
[    3.857463] exynos-tmu 10064000.tmu: Failed to register sensor: -2
[    3.863702] exynos-tmu: probe of 10064000.tmu failed with error -2
[    3.874390] thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
[    3.880547] thermal_sys: Failed to find thermal zone for tmu id=0
[    3.886501] exynos-tmu 10068000.tmu: Failed to register sensor: -2
[    3.892779] exynos-tmu: probe of 10068000.tmu failed with error -2
[    3.902621] thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
[    3.908749] thermal_sys: Failed to find thermal zone for tmu id=0
[    3.914723] exynos-tmu 1006c000.tmu: Failed to register sensor: -2
[    3.920968] exynos-tmu: probe of 1006c000.tmu failed with error -2
[    3.930752] thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
[    3.936791] thermal_sys: Failed to find thermal zone for tmu id=0
[    3.943009] exynos-tmu 100a0000.tmu: Failed to register sensor: -2
[    3.949113] exynos-tmu: probe of 100a0000.tmu failed with error -2
[    3.960975] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    4.034808] cpu cpu0: EM: OPP:1200000 is inefficient
[    4.034871] cpu cpu0: EM: OPP:1100000 is inefficient
[    4.034897] cpu cpu0: EM: OPP:900000 is inefficient
[    4.034922] cpu cpu0: EM: OPP:800000 is inefficient
[    4.034945] cpu cpu0: EM: OPP:600000 is inefficient
[    4.034968] cpu cpu0: EM: OPP:500000 is inefficient
[    4.034991] cpu cpu0: EM: OPP:400000 is inefficient
[    4.035014] cpu cpu0: EM: OPP:200000 is inefficient
[    4.039815] cpu cpu0: EM: created perf domain
[    4.054212] cpu cpu4: EM: OPP:1700000 is inefficient
[    4.054244] cpu cpu4: EM: OPP:1600000 is inefficient
[    4.054269] cpu cpu4: EM: OPP:1400000 is inefficient
[    4.054293] cpu cpu4: EM: OPP:1300000 is inefficient
[    4.054317] cpu cpu4: EM: OPP:1100000 is inefficient
[    4.054339] cpu cpu4: EM: OPP:1000000 is inefficient
[    4.054362] cpu cpu4: EM: OPP:900000 is inefficient
[    4.054386] cpu cpu4: EM: OPP:700000 is inefficient
[    4.054409] cpu cpu4: EM: OPP:600000 is inefficient
[    4.054431] cpu cpu4: EM: OPP:500000 is inefficient
[    4.054454] cpu cpu4: EM: OPP:400000 is inefficient
[    4.054476] cpu cpu4: EM: OPP:300000 is inefficient
[    4.054499] cpu cpu4: EM: OPP:200000 is inefficient
[    4.061083] cpu cpu4: EM: created perf domain
[    4.074840] pwrseq_emmc pwrseq: GPIO lookup for consumer reset
[    4.074870] pwrseq_emmc pwrseq: using device tree for GPIO lookup
[    4.074956] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/pwrseq[0]' - status (0)
[    4.075019] gpio_stub_drv gpiochip10: Persistence not supported for GPIO 0
[    4.076657] sdhci: Secure Digital Host Controller Interface driver
[    4.081719] sdhci: Copyright(c) Pierre Ossman
[    4.087605] Synopsys Designware Multimedia Card Interface Driver
[    4.097472] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    4.097485] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    4.110529] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    4.114328] s5p-secss 10830000.sss: s5p-sss driver registered
[    4.116556] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    4.116895] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    4.118527] hid: raw HID events driver (C) Jiri Kosina
[    4.122555] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 135,64 bit host data width,64 deep fifo
[    4.124019] usbcore: registered new interface driver usbhid
[    4.124044] usbhid: USB HID core driver
[    4.127687] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    4.139319] dwmmc_exynos 12200000.mmc: GPIO lookup for consumer cd
[    4.148717] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 134,64 bit host data width,64 deep fifo
[    4.154059] dwmmc_exynos 12200000.mmc: using device tree for GPIO lookup
[    4.157713] dwmmc_exynos 12220000.mmc: GPIO lookup for consumer cd
[    4.157885] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@12200000[0]'
[    4.157976] dwmmc_exynos 12220000.mmc: using device tree for GPIO lookup
[    4.163325] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@12200000[0]'
[    4.172656] dwmmc_exynos 12200000.mmc: using lookup tables for GPIO lookup
[    4.172692] dwmmc_exynos 12200000.mmc: No GPIO consumer cd found
[    4.172708] dwmmc_exynos 12200000.mmc: GPIO lookup for consumer wp
[    4.172719] dwmmc_exynos 12200000.mmc: using device tree for GPIO lookup
[    4.172740] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12200000[0]'
[    4.172746] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/mmc@12220000[0]'
[    4.172784] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12200000[0]'
[    4.172788] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/mmc@12220000[0]'
[    4.172823] dwmmc_exynos 12200000.mmc: using lookup tables for GPIO lookup
[    4.172826] dwmmc_exynos 12220000.mmc: using lookup tables for GPIO lookup
[    4.172837] dwmmc_exynos 12200000.mmc: No GPIO consumer wp found
[    4.172838] dwmmc_exynos 12220000.mmc: No GPIO consumer cd found
[    4.172848] dwmmc_exynos 12220000.mmc: GPIO lookup for consumer wp
[    4.172859] dwmmc_exynos 12220000.mmc: using device tree for GPIO lookup
[    4.172880] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12220000[0]'
[    4.172939] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12220000[0]'
[    4.172953] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[    4.178212] dwmmc_exynos 12220000.mmc: using lookup tables for GPIO lookup
[    4.178225] dwmmc_exynos 12220000.mmc: No GPIO consumer wp found
[    4.197965] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    4.198898] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    4.213043] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    4.223224] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    4.229326] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    4.235820] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    4.243140] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0-0)
[    4.251527] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0-1)
[    4.258721] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1-0)
[    4.266541] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1-1)
[    4.280925] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_0 not found
[    4.287450] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_1 not found
[    4.296789] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
[    4.304691] exynos-adc 12d10000.adc: error -ENXIO: IRQ index 1 not found
[    4.319744] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    4.321614] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[    4.332719] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    4.345152] mmcblk1: mmc1:aaaa SC16G 14.8 GiB 
[    4.347512] IPv6: Loaded, but administratively disabled, reboot required to enable
[    4.355737] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.362876] NET: Registered PF_PACKET protocol family
[    4.364141]  mmcblk1: p1 p2
[    4.366944] NET: Registered PF_KEY protocol family
[    4.374787] Key type dns_resolver registered
[    4.379009] Registering SWP/SWPB emulation handler
[    4.388569] registered taskstats version 1
[    4.391269] Loading compiled-in X.509 certificates
[    4.397097] zswap: loaded using pool lzo/zbud
[    4.401396] Key type .fscrypt registered
[    4.404235] Key type fscrypt-provisioning registered
[    4.461668] Key type encrypted registered
[    4.656276] exynos-chipid 10000000.chipid: cpu0 opp0, freq: 1500 missing
[    4.663316] exynos-chipid 10000000.chipid: cpu4 opp0, freq: 2100 missing
[    4.671396] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422000] REV[0x1] Detected
[    4.685142] exynos-hdmi 14530000.hdmi: GPIO lookup for consumer hpd
[    4.685194] exynos-hdmi 14530000.hdmi: using device tree for GPIO lookup
[    4.685333] of_get_named_gpiod_flags: parsed 'hpd-gpios' property of node '/soc/hdmi@14530000[0]' - status (0)
[    4.685429] gpio_stub_drv gpiochip4: Persistence not supported for GPIO 7
[    4.695129] OF: graph: no port node found in /soc/hdmi@14530000
[    4.711209] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[    4.720508] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
[    4.728766] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
[    4.738531] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes
[    4.748618] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes
[    4.753157] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[    4.765807] panfrost 11800000.gpu: clock rate = 400000000
[    4.798992] panfrost 11800000.gpu: mali-t620 id 0x620 major 0x0 minor 0x1 status 0x0
[    4.805519] panfrost 11800000.gpu: features: 00000000,00000408, issues: 00000000,21eee400
[    4.813895] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7
[    4.825564] panfrost 11800000.gpu: shader_present=0x3f l2_present=0x11
[    4.833085] panfrost 11800000.gpu: using only 1st core group (4 cores from 6)
[    4.847202] [drm] Initialized panfrost 1.2.0 20180908 for 11800000.gpu on minor 1
[    4.870261] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    4.874663] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[    4.883922] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    4.892698] xhci-hcd xhci-hcd.8.auto: irq 143, io mem 0x12000000
[    4.899663] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    4.903874] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[    4.911548] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
[    4.919196] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    4.926251] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.933452] usb usb3: Product: xHCI Host Controller
[    4.938363] usb usb3: Manufacturer: Linux 6.1.1-armmp-lpae xhci-hcd
[    4.944468] usb usb3: SerialNumber: xhci-hcd.8.auto
[    4.952189] hub 3-0:1.0: USB hub found
[    4.954823] hub 3-0:1.0: 1 port detected
[    4.960510] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.967644] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    4.975584] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.982706] usb usb4: Product: xHCI Host Controller
[    4.987502] usb usb4: Manufacturer: Linux 6.1.1-armmp-lpae xhci-hcd
[    4.994259] usb usb4: SerialNumber: xhci-hcd.8.auto
[    5.000365] hub 4-0:1.0: USB hub found
[    5.002772] hub 4-0:1.0: 1 port detected
[    5.016885] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    5.021133] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    5.031163] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    5.039547] xhci-hcd xhci-hcd.9.auto: irq 144, io mem 0x12400000
[    5.046361] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    5.050772] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    5.058355] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[    5.065477] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    5.073153] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.080354] usb usb5: Product: xHCI Host Controller
[    5.085165] usb usb5: Manufacturer: Linux 6.1.1-armmp-lpae xhci-hcd
[    5.091419] usb usb5: SerialNumber: xhci-hcd.9.auto
[    5.099463] hub 5-0:1.0: USB hub found
[    5.102155] hub 5-0:1.0: 1 port detected
[    5.110253] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.117589] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    5.125342] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.132824] usb usb6: Product: xHCI Host Controller
[    5.137309] usb usb6: Manufacturer: Linux 6.1.1-armmp-lpae xhci-hcd
[    5.143647] usb usb6: SerialNumber: xhci-hcd.9.auto
[    5.152605] hub 6-0:1.0: USB hub found
[    5.155040] hub 6-0:1.0: 1 port detected
[    5.164216] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    5.170012] s3c-rtc 101e0000.rtc: registered as rtc1
[    5.182191] exynos-bus: new bus device registered: soc:bus-wcore ( 88700 KHz ~ 532000 KHz)
[    5.192475] exynos-bus: new bus device registered: soc:bus-noc ( 66600 KHz ~ 111000 KHz)
[    5.201603] exynos-bus: new bus device registered: soc:bus-fsys-apb (111000 KHz ~ 222000 KHz)
[    5.211542] exynos-bus: new bus device registered: soc:bus-fsys2 ( 75000 KHz ~ 200000 KHz)
[    5.221496] exynos-bus: new bus device registered: soc:bus-mfc ( 83250 KHz ~ 333000 KHz)
[    5.230899] exynos-bus: new bus device registered: soc:bus-gen ( 88700 KHz ~ 266000 KHz)
[    5.239452] exynos-bus: new bus device registered: soc:bus-peri ( 66600 KHz ~  66600 KHz)
[    5.249448] exynos-bus: new bus device registered: soc:bus-g2d ( 83250 KHz ~ 333000 KHz)
[    5.258800] exynos-bus: new bus device registered: soc:bus-g2d-acp ( 66500 KHz ~ 266000 KHz)
[    5.268322] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    5.271035] exynos-bus: new bus device registered: soc:bus-jpeg ( 75000 KHz ~ 300000 KHz)
[    5.284487] exynos-bus: new bus device registered: soc:bus-jpeg-apb ( 83250 KHz ~ 166500 KHz)
[    5.293615] exynos-bus: new bus device registered: soc:bus-disp1-fimd (120000 KHz ~ 200000 KHz)
[    5.303312] exynos-bus: new bus device registered: soc:bus-disp1 (120000 KHz ~ 300000 KHz)
[    5.312539] exynos-bus: new bus device registered: soc:bus-gscl-scaler (150000 KHz ~ 300000 KHz)
[    5.322795] exynos-bus: new bus device registered: soc:bus-mscl ( 84000 KHz ~ 666000 KHz)
[    5.347200] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/power-key[0]' - status (0)
[    5.347269] gpio_stub_drv gpiochip1: Persistence not supported for GPIO 3
[    5.348298] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    5.358465] clk: Not disabling unused clocks
[    5.361387] ALSA device list:
[    5.364300]   #0: ODROID-XU4
[    5.370367] Freeing unused kernel image (initmem) memory: 1024K
[    5.520343] Run /init as init process
[    5.522658]   with arguments:
[    5.522680]     /init
[    5.522701]   with environment:
[    5.522719]     HOME=/
[    5.522738]     TERM=linux
[    5.558850] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23
[    5.565921] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.573133] usb 3-1: Product: USB2.0 Hub
[    5.576932] usb 3-1: Manufacturer: GenesysLogic
[    5.627078] hub 3-1:1.0: USB hub found
[    5.632749] hub 3-1:1.0: 2 ports detected
[    5.708604] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.752437] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23
[    5.759511] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.766517] usb 4-1: Product: USB3.0 Hub
[    5.770484] usb 4-1: Manufacturer: GenesysLogic
[    5.800556] hub 4-1:1.0: USB hub found
[    5.803389] hub 4-1:1.0: 2 ports detected
[    6.228505] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    6.262310] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    6.269233] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    6.276235] usb 6-1: Product: USB 10/100/1000 LAN
[    6.280983] usb 6-1: Manufacturer: Realtek
[    6.284986] usb 6-1: SerialNumber: 000001000000
[    6.539564] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    6.749924] r8152 6-1:1.0 eth0: v2.16.3 (2022/07/06)
[    6.753567] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[    6.769056] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
[    6.803345] usb 4-1.1: New USB device found, idVendor=abcd, idProduct=6103, bcdDevice= 0.06
[    6.810998] usb 4-1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[    6.817908] usb 4-1.1: Product: Ext. HDD
[    6.821804] usb 4-1.1: Manufacturer: Innostor
[    6.826404] usb 4-1.1: SerialNumber: 20190401
[    6.852811] usb-storage 4-1.1:1.0: USB Mass Storage device detected
[    6.874972] scsi host0: usb-storage 4-1.1:1.0
[    7.668859] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd
[    7.702109] usb 4-1.2: New USB device found, idVendor=abcd, idProduct=6103, bcdDevice= 0.06
[    7.709789] usb 4-1.2: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[    7.716743] usb 4-1.2: Product: Ext. HDD
[    7.720780] usb 4-1.2: Manufacturer: Innostor
[    7.724974] usb 4-1.2: SerialNumber: 20190402
[    7.745966] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[    7.754661] scsi host1: usb-storage 4-1.2:1.0
[    7.977617] scsi host0: scsi scan: INQUIRY result too short (5), using 36
[    7.983904] scsi 0:0:0:0: Direct-Access     WDC WD10 JFCX-68N6GN0          PQ: 0 ANSI: 0
[    8.014360] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.014398] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.028629] sd 0:0:0:0: [sda] Write Protect is off
[    8.032187] sd 0:0:0:0: [sda] Mode Sense: 3b 00 00 00
[    8.034924] sd 0:0:0:0: [sda] No Caching mode page found
[    8.039387] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    8.841680] scsi host1: scsi scan: INQUIRY result too short (5), using 36
[    8.847752] scsi 1:0:0:0: Direct-Access     WDC WD10 JFCX-68N6GN0          PQ: 0 ANSI: 0
[    8.989350] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.997498] sd 1:0:0:0: [sdb] Write Protect is off
[    9.001282] sd 1:0:0:0: [sdb] Mode Sense: 3b 00 00 00
[    9.002713] sd 1:0:0:0: [sdb] No Caching mode page found
[    9.006627] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[    9.054864] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   10.391020]  sda: sda1
[   10.407916] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.649320]  sdb: sdb1
[   11.653782] sd 1:0:0:0: [sdb] Attached SCSI disk
[   12.061816] random: crng init done
[   12.098333] raid6: neonx8   gen()  1445 MB/s
[   12.124036] md/raid1:md0: active with 2 out of 2 mirrors
[   12.131647] md0: detected capacity change from 0 to 1953258880
[   12.268233] raid6: neonx4   gen()  4998 MB/s
[   12.438258] raid6: neonx2   gen()  4666 MB/s
[   12.608264] raid6: neonx1   gen()  3698 MB/s
[   12.778401] raid6: int32x8  gen()  1114 MB/s
[   12.948294] raid6: int32x4  gen()  1269 MB/s
[   13.118498] raid6: int32x2  gen()  1126 MB/s
[   13.288266] raid6: int32x1  gen()  1092 MB/s
[   13.291119] raid6: using algorithm neonx4 gen() 4998 MB/s
[   13.458288] raid6: .... xor() 3409 MB/s, rmw enabled
[   13.461837] raid6: using neon recovery algorithm
[   13.470518] xor: measuring software checksum speed
[   13.478591]    arm4regs        :  2217 MB/sec
[   13.486591]    8regs           :  1949 MB/sec
[   13.494630]    32regs          :  1949 MB/sec
[   13.501371]    neon            :  2649 MB/sec
[   13.504304] xor: using function: neon (2649 MB/sec)
[   13.511088] async_tx: api initialized (async)
[   14.616069] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
[   15.984042] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[   16.013570] systemd[1]: Detected architecture arm.
[   16.038821] systemd[1]: Set hostname to <fam30123>.
[   17.084728] systemd[1]: Queued start job for default target Graphical Interface.
[   17.160011] systemd[1]: Created slice system-getty.slice.
[   17.181344] systemd[1]: Created slice system-modprobe.slice.
[   17.191607] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   17.204774] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   17.216430] systemd[1]: Created slice User and Session Slice.
[   17.224086] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   17.233388] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   17.245159] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   17.254534] systemd[1]: Reached target Local Encrypted Volumes.
[   17.260190] systemd[1]: Reached target Paths.
[   17.264172] systemd[1]: Reached target Remote File Systems.
[   17.269842] systemd[1]: Reached target Slices.
[   17.274062] systemd[1]: Reached target Swap.
[   17.287820] systemd[1]: Listening on Syslog Socket.
[   17.294078] systemd[1]: Listening on fsck to fsckd communication Socket.
[   17.301977] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   17.310501] systemd[1]: Listening on Journal Audit Socket.
[   17.317542] systemd[1]: Listening on Journal Socket (/dev/log).
[   17.328396] systemd[1]: Listening on Journal Socket.
[   17.338441] systemd[1]: Listening on udev Control Socket.
[   17.346591] systemd[1]: Listening on udev Kernel Socket.
[   17.353178] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   17.441737] systemd[1]: Mounting POSIX Message Queue File System...
[   17.482625] systemd[1]: Mounting Kernel Debug File System...
[   17.505889] systemd[1]: Mounting Kernel Trace File System...
[   17.531150] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   17.558483] systemd[1]: Starting Load Kernel Module configfs...
[   17.582184] systemd[1]: Starting Load Kernel Module drm...
[   17.601449] systemd[1]: Starting Load Kernel Module fuse...
[   17.611839] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   17.619756] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   17.647340] systemd[1]: Starting Journal Service...
[   17.672238] systemd[1]: Starting Load Kernel Modules...
[   17.695597] systemd[1]: Starting Remount Root and Kernel File Systems...
[   17.722634] systemd[1]: Starting Coldplug All udev Devices...
[   17.751778] systemd[1]: Mounted POSIX Message Queue File System.
[   17.758756] systemd[1]: Mounted Kernel Debug File System.
[   17.764566] systemd[1]: Mounted Kernel Trace File System.
[   17.778419] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   17.793473] systemd[1]: modprobe@configfs.service: Succeeded.
[   17.804331] systemd[1]: Finished Load Kernel Module configfs.
[   17.814609] systemd[1]: modprobe@drm.service: Succeeded.
[   17.824109] systemd[1]: Finished Load Kernel Module drm.
[   17.833342] systemd[1]: modprobe@fuse.service: Succeeded.
[   17.843061] systemd[1]: Finished Load Kernel Module fuse.
[   17.854289] systemd[1]: Finished Load Kernel Modules.
[   17.860496] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[   17.879510] systemd[1]: Mounting Kernel Configuration File System...
[   17.881150] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
[   17.906235] systemd[1]: Starting Apply Kernel Variables...
[   17.931609] systemd[1]: Finished Remount Root and Kernel File Systems.
[   17.946598] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   17.954409] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   17.976995] systemd[1]: Starting Load/Save Random Seed...
[   17.998653] systemd[1]: Starting Create System Users...
[   18.013469] systemd[1]: Mounted Kernel Configuration File System.
[   18.036081] systemd[1]: Finished Apply Kernel Variables.
[   18.099798] systemd[1]: Finished Load/Save Random Seed.
[   18.105529] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[   18.130376] systemd[1]: Finished Create System Users.
[   18.293692] systemd[1]: Starting Create Static Device Nodes in /dev...
[   18.438365] systemd[1]: Finished Create Static Device Nodes in /dev.
[   18.444870] systemd[1]: Reached target Local File Systems (Pre).
[   18.562137] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[   18.597096] systemd[1]: Started Journal Service.
[   18.696824] systemd-journald[1534]: Received client request to flush runtime journal.
[   20.565569] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[   20.622996] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[   20.632625] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[   20.810603] mc: Linux media interface: v0.10
[   20.937664] videodev: Linux video capture interface: v2.00
[   21.164084] s5p-mfc 11000000.codec: Adding to iommu group 1
[   21.183031] s5p-jpeg 11f50000.jpeg: Adding to iommu group 2
[   21.202884] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers
[   21.239310] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
[   21.257084] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video2
[   21.257254] exynos-gsc 13e00000.video-scaler: Adding to iommu group 3
[   21.257294] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[   21.260604] s5p-mfc 11000000.codec: decoder registered as /dev/video1
[   21.282034] s5p-mfc 11000000.codec: encoder registered as /dev/video4
[   21.299191] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
[   21.327650] exynos-gsc 13e10000.video-scaler: Adding to iommu group 5
[   21.348796] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video5
[   21.396163] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video7
[   21.402404] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[   22.029489] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none.
[   23.386742] EXT4-fs (md0): mounted filesystem with ordered data mode. Quota mode: none.
[   23.857219] r8152 6-1:1.0 eth0: carrier on
[   35.713622] vdd_ldo12: disabling
[   35.718866] vdd_ldo16: disabling
[   35.725719] vdd_ldo24: disabling

Any ideas?

odro-volti · Post by **odro-volti** » Fri Jan 06, 2023 12:38 am

...please not any usb-quirk nonsense....

Code: Select all

# modinfo usbhid
name:           usbhid
filename:       (builtin)
license:        GPL
file:           drivers/hid/usbhid/usbhid
description:    USB HID core driver
author:         Jiri Kosina
author:         Vojtech Pavlik
author:         Andreas Gal
parm:           mousepoll:Polling interval of mice (uint)
parm:           jspoll:Polling interval of joysticks (uint)
parm:           kbpoll:Polling interval of keyboards (uint)
parm:           ignoreled:Autosuspend with active leds (uint)
parm:           quirks:Add/modify USB HID quirks by specifying  quirks=vendorID:productID:quirks where vendorID, productID, and quirks are all in 0x-prefixed hex (array of charp)

I have no idea where to start with this...

meveric · Post by **meveric** » Fri Jan 06, 2023 2:13 am

Yes we discussed this here in the thread a short while ago that the network speed is rather slow.

You can see very high CPU load which is further limited by the fact that most of the time only the Cortex-A7 cores are used for network and not the faster A15 cores.

It seems to be a flaw in the drivers itself, but nothing that is easy to fix.

I've noticed this is specific to the NIC used on the XU4 itself, as using for example an external USB-to-LAN adapter provides much better performance.

odro-volti · Post by **odro-volti** » Fri Jan 06, 2023 2:19 am

Hi and thanks for reply!

In htop I see no excessive CPU usage under copy-via-smb, only 1.22 load average. You think the bottleneck is the RJ45? No way to use the old driver from Buster? USB-RJ45 is no option, as the USB3 ports are occupied by RAID drives. Or are both USB3 and the RJ45 on the same bus?!? Then a powered USB3 hub might be an option to try and see if it helps...

But the USB-HID is definitely not the culprit?!?

odro-volti · Post by **odro-volti** » Fri Jan 06, 2023 4:05 am

Copying FROM the smb share I get at least stable 17 MiB/s (USB3-Sata) or 22-24 MiB/s (USB3-M.2Sata), so reading faster than writing -> problem is USB?

meveric · Post by **meveric** » Fri Jan 06, 2023 7:03 am

just write and read directly from the device (without smb) and you know if it's USB related or not.

odro-volti · Post by **odro-volti** » Sat Jan 07, 2023 1:56 am

Yeah, will try with rsync these days.

Another question: I have on root email from cron.daily

Code: Select all

/etc/cron.daily/fstrim:
/etc/cron.daily/fstrim: 2: /usr/sbin/fstrim: not found
run-parts: /etc/cron.daily/fstrim exited with return code 127

and

Code: Select all

# which fstrim
/sbin/fstrim

Is it safe to change the cron job to the correct path for trim or should that be changed upstream (image)? Many thanks in advance!

meveric · Post by **meveric** » Sun Jan 08, 2023 3:53 am

yes you can change it.. it's just some optimization for SD/eMMC that runs once a day.

odro-volti · Post by **odro-volti** » Sat Jan 14, 2023 6:54 pm

I played arround with the NAS servers (smb), USB quirks, dding to SD-card and NAS drives, rsync to/from SD-card/NAS-drives and performance over smb/samba.

tldr: Armbian Bullseye (kernel 5.4.225, smb 4.13.13) performes much better (arround 50-60 MiB/s read/write in smb with Dolphin) than new Debian Bullseye (kernel 6.1.1 lpae, smb 4.13.13) on same hardware (arround 7 to 13 MiB/s read/write, depending on USB-SATA hardware used) with Linux clients (opensuse Tumbleweed kernel 6.1.3.1, smb 4.17.4 something).

But an old Win 7 client (smb 2_10 without encryption) can write/read to/from my Debian Bullseye NAS with 35/42 MB/s. So what is here the real bottleneck?

- Kernel: Yes (different between Armbian and Debian)?
- smb: No? (same on Armbian and Debian)
- encryption/something: Maybe?!?

meveric · Post by **meveric** » Sat Jan 14, 2023 8:31 pm

AS it was discussed already the LAN drivers for Kernel 6.1. Do not perform as well as the ones used in Kernel 4.14.
I can't say why.. I'm not a Kernel developer, using iperf3 you can see an extremely high load on the CPU. That's all I can say.

odro-volti · Post by **odro-volti** » Sun Jan 15, 2023 3:11 am

...but that's not consistent with the good performance I see with Debian Bullseye (your image) and win7 (unecrypted smb). And I don't see high load with htop while reading/writing via smb. The RJ45 driver can't be the culprit in my setup.

rooted · Post by **rooted** » Sun Jan 15, 2023 11:38 am

odro-volti wrote:...but that's not consistent with the good performance I see with Debian Bullseye (your image) and win7 (unecrypted smb). And I don't see high load with htop while reading/writing via smb. The RJ45 driver can't be the culprit in my setup.

Are you using NTFS?

odro-volti · Post by **odro-volti** » Tue Jan 17, 2023 6:42 pm

Nope, EXT4 all here. Generated on RAID1 with mdadm.

Replaced the Debian Bullseye by latest Armbian Bullseye and same smb.conf and get read/write 65 MiB/s with Armbian compared to 7-16 MiB/s with Debian.

mad_ady · Post by **mad_ady** » Tue Jan 17, 2023 9:35 pm

It may be worth comparing/diff-ing kernel tunables (sysctl -a) between the two oses. Perhaps one has some limits by default.

odro-volti · Post by **odro-volti** » Tue Jan 17, 2023 10:11 pm

OK, Armbian has

Code: Select all

sysctl -a
debug.kprobes-optimization = 1
dev.raid.speed_limit_max = 200000
dev.raid.speed_limit_min = 1000
dev.scsi.logging_level = 0
dev.tty.ldisc_autoload = 1
fs.aio-max-nr = 65536
fs.aio-nr = 0
fs.binfmt_misc.status = enabled
fs.dentry-state = 23151 5414    45      0       1512    0
fs.dir-notify-enable = 1
fs.epoll.max_user_watches = 253775
fs.file-max = 2147483647
fs.file-nr = 1248       0       2147483647
fs.inode-nr = 24328     2889
fs.inode-state = 24318  2889    0       0       0       0       0
fs.inotify.max_queued_events = 16384
fs.inotify.max_user_instances = 128
fs.inotify.max_user_watches = 8192
fs.lease-break-time = 45
fs.leases-enable = 1
fs.mount-max = 100000
fs.mqueue.msg_default = 10
fs.mqueue.msg_max = 10
fs.mqueue.msgsize_default = 8192
fs.mqueue.msgsize_max = 8192
fs.mqueue.queues_max = 256
fs.nr_open = 1048576
fs.overflowgid = 65534
fs.overflowuid = 65534
fs.pipe-max-size = 1048576
fs.pipe-user-pages-hard = 0
fs.pipe-user-pages-soft = 16384
fs.protected_fifos = 1
fs.protected_hardlinks = 1
fs.protected_regular = 2
fs.protected_symlinks = 1
fs.quota.allocated_dquots = 0
fs.quota.cache_hits = 0
fs.quota.drops = 0
fs.quota.free_dquots = 0
fs.quota.lookups = 0
fs.quota.reads = 0
fs.quota.syncs = 8
fs.quota.writes = 0
fs.suid_dumpable = 0
fs.verity.require_signatures = 0
kernel.acct = 4 2       30
kernel.auto_msgmni = 0
kernel.bpf_stats_enabled = 0
kernel.cad_pid = 1
kernel.cap_last_cap = 37
kernel.core_pattern = core
kernel.core_pipe_limit = 0
kernel.core_uses_pid = 0
kernel.ctrl-alt-del = 0
kernel.dmesg_restrict = 0
kernel.domainname = (none)
kernel.ftrace_dump_on_oops = 0
kernel.hostname = odARMBbul60123
kernel.hotplug = 
kernel.keys.gc_delay = 300
kernel.keys.maxbytes = 20000
kernel.keys.maxkeys = 200
kernel.keys.persistent_keyring_expiry = 259200
kernel.keys.root_maxbytes = 25000000
kernel.keys.root_maxkeys = 1000000
kernel.kptr_restrict = 0
kernel.max_lock_depth = 1024
kernel.modprobe = /sbin/modprobe
kernel.modules_disabled = 0
kernel.msgmax = 8192
kernel.msgmnb = 16384
kernel.msgmni = 32000
kernel.ngroups_max = 65536
kernel.osrelease = 5.4.225-odroidxu4
kernel.ostype = Linux
kernel.overflowgid = 65534
kernel.overflowuid = 65534
kernel.panic = 0
kernel.panic_on_oops = 0
kernel.panic_on_rcu_stall = 0
kernel.panic_on_warn = 0
kernel.panic_print = 0
kernel.perf_cpu_time_max_percent = 25
kernel.perf_event_max_contexts_per_stack = 8
kernel.perf_event_max_sample_rate = 100000
kernel.perf_event_max_stack = 127
kernel.perf_event_mlock_kb = 516
kernel.perf_event_paranoid = 2
kernel.pid_max = 32768
kernel.poweroff_cmd = /sbin/poweroff
kernel.print-fatal-signals = 0
kernel.printk = 1       4       1       7
kernel.printk_delay = 0
kernel.printk_devkmsg = on
kernel.printk_ratelimit = 5
kernel.printk_ratelimit_burst = 10
kernel.pty.max = 4096
kernel.pty.nr = 1
kernel.pty.reserve = 1024
kernel.random.boot_id = 97c47573-46c9-4f5c-9124-2fee4c86fb75
kernel.random.entropy_avail = 256
kernel.random.poolsize = 256
kernel.random.urandom_min_reseed_secs = 60
kernel.random.uuid = caf37465-d7bd-4897-be79-e3230dff6f92
kernel.random.write_wakeup_threshold = 256
kernel.randomize_va_space = 1
kernel.real-root-dev = 0
kernel.sched_cfs_bandwidth_slice_us = 5000
kernel.sched_child_runs_first = 0
kernel.sched_rr_timeslice_ms = 100
kernel.sched_rt_period_us = 1000000
kernel.sched_rt_runtime_us = 950000
kernel.seccomp.actions_avail = kill_process kill_thread trap errno user_notif trace log allow
kernel.seccomp.actions_logged = kill_process kill_thread trap errno user_notif trace log
kernel.sem = 32000      1024000000      500     32000
kernel.shm_rmid_forced = 0
kernel.shmall = 4278190079
kernel.shmmax = 4278190079
kernel.shmmni = 4096
kernel.sysctl_writes_strict = 1
kernel.sysrq = 1
kernel.tainted = 0
kernel.threads-max = 29309
kernel.timer_migration = 1
kernel.traceoff_on_warning = 0
kernel.tracepoint_printk = 0
kernel.unprivileged_bpf_disabled = 0
kernel.unprivileged_userns_apparmor_policy = 1
kernel.usermodehelper.bset = 4294967295 63
kernel.usermodehelper.inheritable = 4294967295  63
kernel.version = #22.11.1 SMP PREEMPT Wed Nov 30 10:55:16 UTC 2022
kernel.yama.ptrace_scope = 1
net.core.busy_poll = 0
net.core.busy_read = 0
net.core.default_qdisc = pfifo_fast
net.core.dev_weight = 64
net.core.dev_weight_rx_bias = 1
net.core.dev_weight_tx_bias = 1
net.core.devconf_inherit_init_net = 0
net.core.fb_tunnels_only_for_init_net = 0
net.core.flow_limit_cpu_bitmap = 00
net.core.flow_limit_table_len = 4096
net.core.gro_normal_batch = 8
net.core.high_order_alloc_disable = 0
net.core.max_skb_frags = 17
net.core.message_burst = 10
net.core.message_cost = 5
net.core.netdev_budget = 300
net.core.netdev_budget_usecs = 20000
net.core.netdev_max_backlog = 1000
net.core.netdev_rss_key = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
net.core.netdev_tstamp_prequeue = 1
net.core.optmem_max = 10240
net.core.rmem_default = 180224
net.core.rmem_max = 180224
net.core.rps_sock_flow_entries = 32768
net.core.somaxconn = 4096
net.core.tstamp_allow_data = 1
net.core.warnings = 0
net.core.wmem_default = 180224
net.core.wmem_max = 180224
net.core.xfrm_acq_expires = 30
net.core.xfrm_aevent_etime = 10
net.core.xfrm_aevent_rseqth = 2
net.core.xfrm_larval_drop = 1
net.ipv4.cipso_cache_bucket_size = 10
net.ipv4.cipso_cache_enable = 1
net.ipv4.cipso_rbm_optfmt = 0
net.ipv4.cipso_rbm_strictvalid = 1
net.ipv4.conf.all.accept_local = 0
net.ipv4.conf.all.accept_redirects = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.arp_accept = 0
net.ipv4.conf.all.arp_announce = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.arp_ignore = 0
net.ipv4.conf.all.arp_notify = 0
net.ipv4.conf.all.bc_forwarding = 0
net.ipv4.conf.all.bootp_relay = 0
net.ipv4.conf.all.disable_policy = 0
net.ipv4.conf.all.disable_xfrm = 0
net.ipv4.conf.all.drop_gratuitous_arp = 0
net.ipv4.conf.all.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.all.force_igmp_version = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.all.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.all.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.all.ignore_routes_with_linkdown = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.medium_id = 0
net.ipv4.conf.all.promote_secondaries = 0
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.proxy_arp_pvlan = 0
net.ipv4.conf.all.route_localnet = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.secure_redirects = 1
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.all.shared_media = 1
net.ipv4.conf.all.src_valid_mark = 0
net.ipv4.conf.all.tag = 0
net.ipv4.conf.default.accept_local = 0
net.ipv4.conf.default.accept_redirects = 1
net.ipv4.conf.default.accept_source_route = 1
net.ipv4.conf.default.arp_accept = 0
net.ipv4.conf.default.arp_announce = 0
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.arp_ignore = 0
net.ipv4.conf.default.arp_notify = 0
net.ipv4.conf.default.bc_forwarding = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.disable_policy = 0
net.ipv4.conf.default.disable_xfrm = 0
net.ipv4.conf.default.drop_gratuitous_arp = 0
net.ipv4.conf.default.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.default.force_igmp_version = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.default.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.default.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.default.ignore_routes_with_linkdown = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.promote_secondaries = 0
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.proxy_arp_pvlan = 0
net.ipv4.conf.default.route_localnet = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.secure_redirects = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.src_valid_mark = 0
net.ipv4.conf.default.tag = 0
net.ipv4.conf.eth0.accept_local = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 1
net.ipv4.conf.eth0.arp_accept = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.arp_notify = 0
net.ipv4.conf.eth0.bc_forwarding = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.drop_gratuitous_arp = 0
net.ipv4.conf.eth0.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.eth0.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.eth0.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.eth0.ignore_routes_with_linkdown = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.promote_secondaries = 0
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.proxy_arp_pvlan = 0
net.ipv4.conf.eth0.route_localnet = 0
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.src_valid_mark = 0
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.lo.accept_local = 0
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.arp_accept = 0
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.arp_notify = 0
net.ipv4.conf.lo.bc_forwarding = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.disable_policy = 1
net.ipv4.conf.lo.disable_xfrm = 1
net.ipv4.conf.lo.drop_gratuitous_arp = 0
net.ipv4.conf.lo.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.lo.force_igmp_version = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.lo.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.lo.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.lo.ignore_routes_with_linkdown = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.promote_secondaries = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.proxy_arp_pvlan = 0
net.ipv4.conf.lo.route_localnet = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.src_valid_mark = 0
net.ipv4.conf.lo.tag = 0
net.ipv4.fib_multipath_hash_policy = 0
net.ipv4.fib_multipath_use_neigh = 0
net.ipv4.fib_sync_mem = 524288
net.ipv4.fwmark_reflect = 0
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_errors_use_inbound_ifaddr = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.icmp_msgs_burst = 50
net.ipv4.icmp_msgs_per_sec = 1000
net.ipv4.icmp_ratelimit = 1000
net.ipv4.icmp_ratemask = 6168
net.ipv4.igmp_link_local_mcast_reports = 1
net.ipv4.igmp_max_memberships = 20
net.ipv4.igmp_max_msf = 10
net.ipv4.igmp_qrv = 2
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_threshold = 65664
net.ipv4.ip_default_ttl = 64
net.ipv4.ip_dynaddr = 0
net.ipv4.ip_early_demux = 1
net.ipv4.ip_forward = 0
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
net.ipv4.ip_local_port_range = 32768    60999
net.ipv4.ip_local_reserved_ports = 
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.ip_unprivileged_port_start = 1024
net.ipv4.ipfrag_high_thresh = 4194304
net.ipv4.ipfrag_low_thresh = 3145728
net.ipv4.ipfrag_max_dist = 64
net.ipv4.ipfrag_secret_interval = 0
net.ipv4.ipfrag_time = 30
net.ipv4.neigh.default.anycast_delay = 100
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.base_reachable_time_ms = 30000
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.locktime = 100
net.ipv4.neigh.default.mcast_resolicit = 0
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.neigh.default.proxy_delay = 80
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.retrans_time_ms = 1000
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.unres_qlen = 91
net.ipv4.neigh.default.unres_qlen_bytes = 180224
net.ipv4.neigh.eth0.anycast_delay = 100
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.base_reachable_time_ms = 30000
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.locktime = 100
net.ipv4.neigh.eth0.mcast_resolicit = 0
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.eth0.proxy_delay = 80
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.retrans_time_ms = 1000
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.unres_qlen = 91
net.ipv4.neigh.eth0.unres_qlen_bytes = 180224
net.ipv4.neigh.lo.anycast_delay = 100
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.base_reachable_time_ms = 30000
net.ipv4.neigh.lo.delay_first_probe_time = 5
net.ipv4.neigh.lo.gc_stale_time = 60
net.ipv4.neigh.lo.locktime = 100
net.ipv4.neigh.lo.mcast_resolicit = 0
net.ipv4.neigh.lo.mcast_solicit = 3
net.ipv4.neigh.lo.proxy_delay = 80
net.ipv4.neigh.lo.proxy_qlen = 64
net.ipv4.neigh.lo.retrans_time_ms = 1000
net.ipv4.neigh.lo.ucast_solicit = 3
net.ipv4.neigh.lo.unres_qlen = 91
net.ipv4.neigh.lo.unres_qlen_bytes = 180224
net.ipv4.ping_group_range = 1   0
net.ipv4.raw_l3mdev_accept = 1
net.ipv4.route.error_burst = 500
net.ipv4.route.error_cost = 100
net.ipv4.route.gc_elasticity = 8
net.ipv4.route.gc_interval = 60
net.ipv4.route.gc_min_interval = 0
net.ipv4.route.gc_min_interval_ms = 500
net.ipv4.route.gc_thresh = -1
net.ipv4.route.gc_timeout = 300
net.ipv4.route.max_size = 2147483647
net.ipv4.route.min_adv_mss = 256
net.ipv4.route.min_pmtu = 552
net.ipv4.route.mtu_expires = 600
net.ipv4.route.redirect_load = 2
net.ipv4.route.redirect_number = 9
net.ipv4.route.redirect_silence = 2048
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_adv_win_scale = 1
net.ipv4.tcp_allowed_congestion_control = reno cubic
net.ipv4.tcp_app_win = 31
net.ipv4.tcp_autocorking = 1
net.ipv4.tcp_available_congestion_control = reno cubic
net.ipv4.tcp_available_ulp = 
net.ipv4.tcp_base_mss = 1024
net.ipv4.tcp_challenge_ack_limit = 1000
net.ipv4.tcp_comp_sack_delay_ns = 1000000
net.ipv4.tcp_comp_sack_nr = 44
net.ipv4.tcp_congestion_control = cubic
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_early_demux = 1
net.ipv4.tcp_early_retrans = 3
net.ipv4.tcp_ecn = 2
net.ipv4.tcp_ecn_fallback = 1
net.ipv4.tcp_fack = 0
net.ipv4.tcp_fastopen = 1
net.ipv4.tcp_fastopen_blackhole_timeout_sec = 3600
net.ipv4.tcp_fastopen_key = 5ef8c632-35b4b8a3-bd33295f-4ba30e23
net.ipv4.tcp_fin_timeout = 60
net.ipv4.tcp_frto = 2
net.ipv4.tcp_fwmark_accept = 0
net.ipv4.tcp_invalid_ratelimit = 500
net.ipv4.tcp_keepalive_intvl = 75
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_time = 7200
net.ipv4.tcp_l3mdev_accept = 0
net.ipv4.tcp_limit_output_bytes = 1048576
net.ipv4.tcp_low_latency = 0
net.ipv4.tcp_max_orphans = 4096
net.ipv4.tcp_max_reordering = 300
net.ipv4.tcp_max_syn_backlog = 128
net.ipv4.tcp_max_tw_buckets = 4096
net.ipv4.tcp_mem = 8361 11150   16722
net.ipv4.tcp_min_rtt_wlen = 300
net.ipv4.tcp_min_snd_mss = 48
net.ipv4.tcp_min_tso_segs = 2
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_mtu_probe_floor = 48
net.ipv4.tcp_mtu_probing = 0
net.ipv4.tcp_no_metrics_save = 0
net.ipv4.tcp_notsent_lowat = 4294967295
net.ipv4.tcp_orphan_retries = 0
net.ipv4.tcp_pacing_ca_ratio = 120
net.ipv4.tcp_pacing_ss_ratio = 200
net.ipv4.tcp_probe_interval = 600
net.ipv4.tcp_probe_threshold = 8
net.ipv4.tcp_recovery = 1
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_retrans_collapse = 1
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_rmem = 4096        131072  5709056
net.ipv4.tcp_rx_skb_cache = 0
net.ipv4.tcp_sack = 1
net.ipv4.tcp_slow_start_after_idle = 1
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_syn_retries = 6
net.ipv4.tcp_synack_retries = 5
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_thin_linear_timeouts = 0
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tso_win_divisor = 3
net.ipv4.tcp_tw_reuse = 2
net.ipv4.tcp_tx_skb_cache = 0
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_wmem = 4096        16384   4194304
net.ipv4.tcp_workaround_signed_windows = 0
net.ipv4.udp_early_demux = 1
net.ipv4.udp_l3mdev_accept = 0
net.ipv4.udp_mem = 16725        22301   33450
net.ipv4.udp_rmem_min = 4096
net.ipv4.udp_wmem_min = 4096
net.ipv4.xfrm4_gc_thresh = 32768
net.ipv6.anycast_src_echo_reply = 0
net.ipv6.auto_flowlabels = 1
net.ipv6.bindv6only = 0
net.ipv6.calipso_cache_bucket_size = 10
net.ipv6.calipso_cache_enable = 1
net.ipv6.conf.all.accept_dad = 0
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.all.accept_ra_defrtr = 1
net.ipv6.conf.all.accept_ra_from_local = 0
net.ipv6.conf.all.accept_ra_min_hop_limit = 1
net.ipv6.conf.all.accept_ra_mtu = 1
net.ipv6.conf.all.accept_ra_pinfo = 1
net.ipv6.conf.all.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.all.accept_ra_rt_info_min_plen = 0
net.ipv6.conf.all.accept_ra_rtr_pref = 1
net.ipv6.conf.all.accept_redirects = 1
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.all.addr_gen_mode = 0
net.ipv6.conf.all.autoconf = 1
net.ipv6.conf.all.dad_transmits = 1
net.ipv6.conf.all.disable_ipv6 = 0
net.ipv6.conf.all.disable_policy = 0
net.ipv6.conf.all.drop_unicast_in_l2_multicast = 0
net.ipv6.conf.all.drop_unsolicited_na = 0
net.ipv6.conf.all.enhanced_dad = 1
net.ipv6.conf.all.force_mld_version = 0
net.ipv6.conf.all.force_tllao = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.all.hop_limit = 64
net.ipv6.conf.all.ignore_routes_with_linkdown = 0
net.ipv6.conf.all.keep_addr_on_down = 0
net.ipv6.conf.all.max_addresses = 16
net.ipv6.conf.all.max_desync_factor = 600
net.ipv6.conf.all.mc_forwarding = 0
net.ipv6.conf.all.mldv1_unsolicited_report_interval = 10000
net.ipv6.conf.all.mldv2_unsolicited_report_interval = 1000
net.ipv6.conf.all.mtu = 1280
net.ipv6.conf.all.ndisc_notify = 0
net.ipv6.conf.all.ndisc_tclass = 0
net.ipv6.conf.all.optimistic_dad = 0
net.ipv6.conf.all.proxy_ndp = 0
net.ipv6.conf.all.regen_max_retry = 3
net.ipv6.conf.all.router_probe_interval = 60
net.ipv6.conf.all.router_solicitation_delay = 1
net.ipv6.conf.all.router_solicitation_interval = 4
net.ipv6.conf.all.router_solicitation_max_interval = 3600
net.ipv6.conf.all.router_solicitations = -1
net.ipv6.conf.all.seg6_enabled = 0
net.ipv6.conf.all.suppress_frag_ndisc = 1
net.ipv6.conf.all.temp_prefered_lft = 86400
net.ipv6.conf.all.temp_valid_lft = 604800
net.ipv6.conf.all.use_oif_addrs_only = 0
net.ipv6.conf.all.use_optimistic = 0
net.ipv6.conf.all.use_tempaddr = 0
net.ipv6.conf.default.accept_dad = 1
net.ipv6.conf.default.accept_ra = 1
net.ipv6.conf.default.accept_ra_defrtr = 1
net.ipv6.conf.default.accept_ra_from_local = 0
net.ipv6.conf.default.accept_ra_min_hop_limit = 1
net.ipv6.conf.default.accept_ra_mtu = 1
net.ipv6.conf.default.accept_ra_pinfo = 1
net.ipv6.conf.default.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.default.accept_ra_rt_info_min_plen = 0
net.ipv6.conf.default.accept_ra_rtr_pref = 1
net.ipv6.conf.default.accept_redirects = 1
net.ipv6.conf.default.accept_source_route = 0
net.ipv6.conf.default.addr_gen_mode = 0
net.ipv6.conf.default.autoconf = 1
net.ipv6.conf.default.dad_transmits = 1
net.ipv6.conf.default.disable_ipv6 = 0
net.ipv6.conf.default.disable_policy = 0
net.ipv6.conf.default.drop_unicast_in_l2_multicast = 0
net.ipv6.conf.default.drop_unsolicited_na = 0
net.ipv6.conf.default.enhanced_dad = 1
net.ipv6.conf.default.force_mld_version = 0
net.ipv6.conf.default.force_tllao = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.default.hop_limit = 64
net.ipv6.conf.default.ignore_routes_with_linkdown = 0
net.ipv6.conf.default.keep_addr_on_down = 0
net.ipv6.conf.default.max_addresses = 16
net.ipv6.conf.default.max_desync_factor = 600
net.ipv6.conf.default.mc_forwarding = 0
net.ipv6.conf.default.mldv1_unsolicited_report_interval = 10000
net.ipv6.conf.default.mldv2_unsolicited_report_interval = 1000
net.ipv6.conf.default.mtu = 1280
net.ipv6.conf.default.ndisc_notify = 0
net.ipv6.conf.default.ndisc_tclass = 0
net.ipv6.conf.default.optimistic_dad = 0
net.ipv6.conf.default.proxy_ndp = 0
net.ipv6.conf.default.regen_max_retry = 3
net.ipv6.conf.default.router_probe_interval = 60
net.ipv6.conf.default.router_solicitation_delay = 1
net.ipv6.conf.default.router_solicitation_interval = 4
net.ipv6.conf.default.router_solicitation_max_interval = 3600
net.ipv6.conf.default.router_solicitations = -1
net.ipv6.conf.default.seg6_enabled = 0
net.ipv6.conf.default.suppress_frag_ndisc = 1
net.ipv6.conf.default.temp_prefered_lft = 86400
net.ipv6.conf.default.temp_valid_lft = 604800
net.ipv6.conf.default.use_oif_addrs_only = 0
net.ipv6.conf.default.use_optimistic = 0
net.ipv6.conf.default.use_tempaddr = 0
net.ipv6.conf.eth0.accept_dad = 1
net.ipv6.conf.eth0.accept_ra = 0
net.ipv6.conf.eth0.accept_ra_defrtr = 1
net.ipv6.conf.eth0.accept_ra_from_local = 0
net.ipv6.conf.eth0.accept_ra_min_hop_limit = 1
net.ipv6.conf.eth0.accept_ra_mtu = 1
net.ipv6.conf.eth0.accept_ra_pinfo = 1
net.ipv6.conf.eth0.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.eth0.accept_ra_rt_info_min_plen = 0
net.ipv6.conf.eth0.accept_ra_rtr_pref = 1
net.ipv6.conf.eth0.accept_redirects = 1
net.ipv6.conf.eth0.accept_source_route = 0
net.ipv6.conf.eth0.addr_gen_mode = 1
net.ipv6.conf.eth0.autoconf = 1
net.ipv6.conf.eth0.dad_transmits = 1
net.ipv6.conf.eth0.disable_ipv6 = 1
net.ipv6.conf.eth0.disable_policy = 0
net.ipv6.conf.eth0.drop_unicast_in_l2_multicast = 0
net.ipv6.conf.eth0.drop_unsolicited_na = 0
net.ipv6.conf.eth0.enhanced_dad = 1
net.ipv6.conf.eth0.force_mld_version = 0
net.ipv6.conf.eth0.force_tllao = 0
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.eth0.hop_limit = 64
net.ipv6.conf.eth0.ignore_routes_with_linkdown = 0
net.ipv6.conf.eth0.keep_addr_on_down = 0
net.ipv6.conf.eth0.max_addresses = 16
net.ipv6.conf.eth0.max_desync_factor = 600
net.ipv6.conf.eth0.mc_forwarding = 0
net.ipv6.conf.eth0.mldv1_unsolicited_report_interval = 10000
net.ipv6.conf.eth0.mldv2_unsolicited_report_interval = 1000
net.ipv6.conf.eth0.mtu = 1500
net.ipv6.conf.eth0.ndisc_notify = 0
net.ipv6.conf.eth0.ndisc_tclass = 0
net.ipv6.conf.eth0.optimistic_dad = 0
net.ipv6.conf.eth0.proxy_ndp = 0
net.ipv6.conf.eth0.regen_max_retry = 3
net.ipv6.conf.eth0.router_probe_interval = 60
net.ipv6.conf.eth0.router_solicitation_delay = 1
net.ipv6.conf.eth0.router_solicitation_interval = 4
net.ipv6.conf.eth0.router_solicitation_max_interval = 3600
net.ipv6.conf.eth0.router_solicitations = -1
net.ipv6.conf.eth0.seg6_enabled = 0
net.ipv6.conf.eth0.suppress_frag_ndisc = 1
net.ipv6.conf.eth0.temp_prefered_lft = 86400
net.ipv6.conf.eth0.temp_valid_lft = 604800
net.ipv6.conf.eth0.use_oif_addrs_only = 0
net.ipv6.conf.eth0.use_optimistic = 0
net.ipv6.conf.eth0.use_tempaddr = 0
net.ipv6.conf.lo.accept_dad = -1
net.ipv6.conf.lo.accept_ra = 1
net.ipv6.conf.lo.accept_ra_defrtr = 1
net.ipv6.conf.lo.accept_ra_from_local = 0
net.ipv6.conf.lo.accept_ra_min_hop_limit = 1
net.ipv6.conf.lo.accept_ra_mtu = 1
net.ipv6.conf.lo.accept_ra_pinfo = 1
net.ipv6.conf.lo.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.lo.accept_ra_rt_info_min_plen = 0
net.ipv6.conf.lo.accept_ra_rtr_pref = 1
net.ipv6.conf.lo.accept_redirects = 1
net.ipv6.conf.lo.accept_source_route = 0
net.ipv6.conf.lo.addr_gen_mode = 0
net.ipv6.conf.lo.autoconf = 1
net.ipv6.conf.lo.dad_transmits = 1
net.ipv6.conf.lo.disable_ipv6 = 0
net.ipv6.conf.lo.disable_policy = 0
net.ipv6.conf.lo.drop_unicast_in_l2_multicast = 0
net.ipv6.conf.lo.drop_unsolicited_na = 0
net.ipv6.conf.lo.enhanced_dad = 1
net.ipv6.conf.lo.force_mld_version = 0
net.ipv6.conf.lo.force_tllao = 0
net.ipv6.conf.lo.forwarding = 0
net.ipv6.conf.lo.hop_limit = 64
net.ipv6.conf.lo.ignore_routes_with_linkdown = 0
net.ipv6.conf.lo.keep_addr_on_down = 0
net.ipv6.conf.lo.max_addresses = 16
net.ipv6.conf.lo.max_desync_factor = 600
net.ipv6.conf.lo.mc_forwarding = 0
net.ipv6.conf.lo.mldv1_unsolicited_report_interval = 10000
net.ipv6.conf.lo.mldv2_unsolicited_report_interval = 1000
net.ipv6.conf.lo.mtu = 65536
net.ipv6.conf.lo.ndisc_notify = 0
net.ipv6.conf.lo.ndisc_tclass = 0
net.ipv6.conf.lo.optimistic_dad = 0
net.ipv6.conf.lo.proxy_ndp = 0
net.ipv6.conf.lo.regen_max_retry = 3
net.ipv6.conf.lo.router_probe_interval = 60
net.ipv6.conf.lo.router_solicitation_delay = 1
net.ipv6.conf.lo.router_solicitation_interval = 4
net.ipv6.conf.lo.router_solicitation_max_interval = 3600
net.ipv6.conf.lo.router_solicitations = -1
net.ipv6.conf.lo.seg6_enabled = 0
net.ipv6.conf.lo.suppress_frag_ndisc = 1
net.ipv6.conf.lo.temp_prefered_lft = 86400
net.ipv6.conf.lo.temp_valid_lft = 604800
net.ipv6.conf.lo.use_oif_addrs_only = 0
net.ipv6.conf.lo.use_optimistic = 0
net.ipv6.conf.lo.use_tempaddr = -1
net.ipv6.fib_multipath_hash_policy = 0
net.ipv6.flowlabel_consistency = 1
net.ipv6.flowlabel_reflect = 0
net.ipv6.flowlabel_state_ranges = 0
net.ipv6.fwmark_reflect = 0
net.ipv6.icmp.echo_ignore_all = 0
net.ipv6.icmp.echo_ignore_anycast = 0
net.ipv6.icmp.echo_ignore_multicast = 0
net.ipv6.icmp.ratelimit = 1000
net.ipv6.icmp.ratemask = 0-1,3-127
net.ipv6.idgen_delay = 1
net.ipv6.idgen_retries = 3
net.ipv6.ip6frag_high_thresh = 4194304
net.ipv6.ip6frag_low_thresh = 3145728
net.ipv6.ip6frag_secret_interval = 0
net.ipv6.ip6frag_time = 60
net.ipv6.ip_nonlocal_bind = 0
net.ipv6.max_dst_opts_length = 2147483647
net.ipv6.max_dst_opts_number = 8
net.ipv6.max_hbh_length = 2147483647
net.ipv6.max_hbh_opts_number = 8
net.ipv6.mld_max_msf = 64
net.ipv6.mld_qrv = 2
net.ipv6.neigh.default.anycast_delay = 100
net.ipv6.neigh.default.app_solicit = 0
net.ipv6.neigh.default.base_reachable_time_ms = 30000
net.ipv6.neigh.default.delay_first_probe_time = 5
net.ipv6.neigh.default.gc_interval = 30
net.ipv6.neigh.default.gc_stale_time = 60
net.ipv6.neigh.default.gc_thresh1 = 128
net.ipv6.neigh.default.gc_thresh2 = 512
net.ipv6.neigh.default.gc_thresh3 = 1024
net.ipv6.neigh.default.locktime = 0
net.ipv6.neigh.default.mcast_resolicit = 0
net.ipv6.neigh.default.mcast_solicit = 3
net.ipv6.neigh.default.proxy_delay = 80
net.ipv6.neigh.default.proxy_qlen = 64
net.ipv6.neigh.default.retrans_time_ms = 1000
net.ipv6.neigh.default.ucast_solicit = 3
net.ipv6.neigh.default.unres_qlen = 91
net.ipv6.neigh.default.unres_qlen_bytes = 180224
net.ipv6.neigh.eth0.anycast_delay = 100
net.ipv6.neigh.eth0.app_solicit = 0
net.ipv6.neigh.eth0.base_reachable_time_ms = 30000
net.ipv6.neigh.eth0.delay_first_probe_time = 5
net.ipv6.neigh.eth0.gc_stale_time = 60
net.ipv6.neigh.eth0.locktime = 0
net.ipv6.neigh.eth0.mcast_resolicit = 0
net.ipv6.neigh.eth0.mcast_solicit = 3
net.ipv6.neigh.eth0.proxy_delay = 80
net.ipv6.neigh.eth0.proxy_qlen = 64
net.ipv6.neigh.eth0.retrans_time_ms = 1000
net.ipv6.neigh.eth0.ucast_solicit = 3
net.ipv6.neigh.eth0.unres_qlen = 91
net.ipv6.neigh.eth0.unres_qlen_bytes = 180224
net.ipv6.neigh.lo.anycast_delay = 100
net.ipv6.neigh.lo.app_solicit = 0
net.ipv6.neigh.lo.base_reachable_time_ms = 30000
net.ipv6.neigh.lo.delay_first_probe_time = 5
net.ipv6.neigh.lo.gc_stale_time = 60
net.ipv6.neigh.lo.locktime = 0
net.ipv6.neigh.lo.mcast_resolicit = 0
net.ipv6.neigh.lo.mcast_solicit = 3
net.ipv6.neigh.lo.proxy_delay = 80
net.ipv6.neigh.lo.proxy_qlen = 64
net.ipv6.neigh.lo.retrans_time_ms = 1000
net.ipv6.neigh.lo.ucast_solicit = 3
net.ipv6.neigh.lo.unres_qlen = 91
net.ipv6.neigh.lo.unres_qlen_bytes = 180224
net.ipv6.route.gc_elasticity = 9
net.ipv6.route.gc_interval = 30
net.ipv6.route.gc_min_interval = 0
net.ipv6.route.gc_min_interval_ms = 500
net.ipv6.route.gc_thresh = 1024
net.ipv6.route.gc_timeout = 60
net.ipv6.route.max_size = 4096
net.ipv6.route.min_adv_mss = 1220
net.ipv6.route.mtu_expires = 600
net.ipv6.route.skip_notify_on_dev_down = 0
net.ipv6.seg6_flowlabel = 0
net.ipv6.xfrm6_gc_thresh = 32768
net.netfilter.nf_log.0 = NONE
net.netfilter.nf_log.1 = NONE
net.netfilter.nf_log.10 = NONE
net.netfilter.nf_log.11 = NONE
net.netfilter.nf_log.12 = NONE
net.netfilter.nf_log.2 = NONE
net.netfilter.nf_log.3 = NONE
net.netfilter.nf_log.4 = NONE
net.netfilter.nf_log.5 = NONE
net.netfilter.nf_log.6 = NONE
net.netfilter.nf_log.7 = NONE
net.netfilter.nf_log.8 = NONE
net.netfilter.nf_log.9 = NONE
net.netfilter.nf_log_all_netns = 0
net.unix.max_dgram_qlen = 512
sunrpc.max_resvport = 1023
sunrpc.min_resvport = 665
sunrpc.nfs_debug = 0x0000
sunrpc.nfsd_debug = 0x0000
sunrpc.nlm_debug = 0x0000
sunrpc.rpc_debug = 0x0000
sunrpc.tcp_fin_timeout = 15
sunrpc.tcp_max_slot_table_entries = 65536
sunrpc.tcp_slot_table_entries = 2
sunrpc.transports = tcp 1048576
sunrpc.transports = udp 32768
sunrpc.udp_slot_table_entries = 16
user.max_cgroup_namespaces = 14654
user.max_inotify_instances = 128
user.max_inotify_watches = 8192
user.max_ipc_namespaces = 14654
user.max_mnt_namespaces = 14654
user.max_net_namespaces = 14654
user.max_pid_namespaces = 14654
user.max_user_namespaces = 14654
user.max_uts_namespaces = 14654
vm.admin_reserve_kbytes = 8192
vm.block_dump = 0
vm.compact_unevictable_allowed = 1
vm.dirty_background_bytes = 0
vm.dirty_background_ratio = 10
vm.dirty_bytes = 0
vm.dirty_expire_centisecs = 3000
vm.dirty_ratio = 20
vm.dirty_writeback_centisecs = 500
vm.dirtytime_expire_seconds = 43200
vm.extfrag_threshold = 500
vm.highmem_is_dirtyable = 0
vm.laptop_mode = 0
vm.legacy_va_layout = 0
vm.lowmem_reserve_ratio = 32    0       0
vm.max_map_count = 65530
vm.min_free_kbytes = 3391
vm.mmap_min_addr = 4096
vm.mmap_rnd_bits = 8
vm.oom_dump_tasks = 1
vm.oom_kill_allocating_task = 0
vm.overcommit_kbytes = 0
vm.overcommit_memory = 0
vm.overcommit_ratio = 50
vm.page-cluster = 0
vm.panic_on_oom = 0
vm.percpu_pagelist_fraction = 0
vm.stat_interval = 1
vm.swappiness = 100
vm.user_reserve_kbytes = 62410
vm.vfs_cache_pressure = 100
vm.watermark_boost_factor = 15000
vm.watermark_scale_factor = 10

odro-volti · Post by **odro-volti** » Tue Jan 17, 2023 10:13 pm

...while on Debian I get

Code: Select all

sysctl -a
dev.raid.speed_limit_max = 200000
dev.raid.speed_limit_min = 1000
dev.scsi.logging_level = 0
dev.tty.ldisc_autoload = 1
fs.aio-max-nr = 65536
fs.aio-nr = 0
fs.binfmt_misc.status = enabled
fs.dentry-state = 41429 12796   45      0       5195    0
fs.dir-notify-enable = 1
fs.epoll.max_user_watches = 285735
fs.file-max = 2147483647
fs.file-nr = 992        0       2147483647
fs.inode-nr = 36530     445
fs.inode-state = 36530  445     0       0       0       0       0
fs.inotify.max_queued_events = 16384
fs.inotify.max_user_instances = 128
fs.inotify.max_user_watches = 8192
fs.lease-break-time = 45
fs.leases-enable = 1
fs.mount-max = 100000
fs.mqueue.msg_default = 10
fs.mqueue.msg_max = 10
fs.mqueue.msgsize_default = 8192
fs.mqueue.msgsize_max = 8192
fs.mqueue.queues_max = 256
fs.nfs.idmap_cache_timeout = 600
fs.nfs.nfs_callback_tcpport = 0
fs.nfs.nfs_congestion_kb = 45376
fs.nfs.nfs_mountpoint_timeout = 500
fs.nfs.nlm_grace_period = 0
fs.nfs.nlm_tcpport = 0
fs.nfs.nlm_timeout = 10
fs.nfs.nlm_udpport = 0
fs.nfs.nsm_local_state = 0
fs.nfs.nsm_use_hostnames = 0
fs.nr_open = 1048576
fs.ocfs2.nm.hb_ctl_path = /sbin/ocfs2_hb_ctl
fs.pipe-max-size = 1048576
fs.pipe-user-pages-hard = 0
fs.pipe-user-pages-soft = 16384
fs.protected_fifos = 1
fs.protected_hardlinks = 1
fs.protected_regular = 2
fs.protected_symlinks = 1
fs.quota.allocated_dquots = 0
fs.quota.cache_hits = 0
fs.quota.drops = 0
fs.quota.free_dquots = 0
fs.quota.lookups = 0
fs.quota.reads = 0
fs.quota.syncs = 0
fs.quota.warnings = 1
fs.quota.writes = 0
fs.suid_dumpable = 0
fs.xfs.error_level = 3
fs.xfs.filestream_centisecs = 3000
fs.xfs.inherit_noatime = 1
fs.xfs.inherit_nodefrag = 1
fs.xfs.inherit_nodump = 1
fs.xfs.inherit_nosymlinks = 0
fs.xfs.inherit_sync = 1
fs.xfs.irix_sgid_inherit = 0
fs.xfs.irix_symlink_mode = 0
fs.xfs.panic_mask = 0
fs.xfs.rotorstep = 1
fs.xfs.speculative_cow_prealloc_lifetime = 300
fs.xfs.speculative_prealloc_lifetime = 300
fs.xfs.stats_clear = 0
fs.xfs.xfssyncd_centisecs = 3000
kernel.arch = armv7l
kernel.auto_msgmni = 0
kernel.bpf_stats_enabled = 0
kernel.cad_pid = 1
kernel.cap_last_cap = 40
kernel.core_pattern = core
kernel.core_pipe_limit = 0
kernel.core_uses_pid = 0
kernel.ctrl-alt-del = 0
kernel.dmesg_restrict = 0
kernel.domainname = (none)
kernel.ftrace_dump_on_oops = 0
kernel.hostname = fam50123
kernel.hotplug = 
kernel.keys.gc_delay = 300
kernel.keys.maxbytes = 20000
kernel.keys.maxkeys = 200
kernel.keys.root_maxbytes = 25000000
kernel.keys.root_maxkeys = 1000000
kernel.kptr_restrict = 0
kernel.max_lock_depth = 1024
kernel.max_rcu_stall_to_panic = 0
kernel.modprobe = /sbin/modprobe
kernel.modules_disabled = 0
kernel.msg_next_id = -1
kernel.msgmax = 8192
kernel.msgmnb = 16384
kernel.msgmni = 32000
kernel.ngroups_max = 65536
kernel.nmi_watchdog = 0
kernel.ns_last_pid = 14019
kernel.oops_all_cpu_backtrace = 0
kernel.osrelease = 6.1.1-armmp-lpae
kernel.ostype = Linux
kernel.overflowgid = 65534
kernel.overflowuid = 65534
kernel.panic = 0
kernel.panic_on_oops = 0
kernel.panic_on_rcu_stall = 0
kernel.panic_on_warn = 0
kernel.panic_print = 0
kernel.perf_cpu_time_max_percent = 25
kernel.perf_event_max_contexts_per_stack = 8
kernel.perf_event_max_sample_rate = 100000
kernel.perf_event_max_stack = 127
kernel.perf_event_mlock_kb = 516
kernel.perf_event_paranoid = 2
kernel.pid_max = 32768
kernel.poweroff_cmd = /sbin/poweroff
kernel.print-fatal-signals = 0
kernel.printk = 7       4       1       7
kernel.printk_delay = 0
kernel.printk_devkmsg = on
kernel.printk_ratelimit = 5
kernel.printk_ratelimit_burst = 10
kernel.prove_locking = 1
kernel.pty.max = 4096
kernel.pty.nr = 1
kernel.pty.reserve = 1024
kernel.random.boot_id = 7483ffe5-933b-41dc-9855-a2efa82d2e75
kernel.random.entropy_avail = 256
kernel.random.poolsize = 256
kernel.random.urandom_min_reseed_secs = 60
kernel.random.uuid = a07d43b9-cd4f-4d1a-bc22-35cdfb04bf1f
kernel.random.write_wakeup_threshold = 256
kernel.randomize_va_space = 1
kernel.real-root-dev = 0
kernel.sched_cfs_bandwidth_slice_us = 5000
kernel.sched_child_runs_first = 0
kernel.sched_deadline_period_max_us = 4194304
kernel.sched_deadline_period_min_us = 100
kernel.sched_energy_aware = 1
kernel.sched_rr_timeslice_ms = 100
kernel.sched_rt_period_us = 1000000
kernel.sched_rt_runtime_us = 950000
kernel.seccomp.actions_avail = kill_process kill_thread trap errno user_notif trace log allow
kernel.seccomp.actions_logged = kill_process kill_thread trap errno user_notif trace log
kernel.sem = 32000      1024000000      500     32000
kernel.sem_next_id = -1
kernel.shm_next_id = -1
kernel.shm_rmid_forced = 0
kernel.shmall = 4278190079
kernel.shmmax = 4278190079
kernel.shmmni = 4096
kernel.soft_watchdog = 1
kernel.softlockup_all_cpu_backtrace = 0
kernel.softlockup_panic = 0
kernel.sysctl_writes_strict = 1
kernel.sysrq = 1
kernel.tainted = 0
kernel.task_delayacct = 0
kernel.threads-max = 29929
kernel.timer_migration = 1
kernel.traceoff_on_warning = 0
kernel.tracepoint_printk = 0
kernel.unprivileged_bpf_disabled = 2
kernel.usermodehelper.bset = 4294967295 511
kernel.usermodehelper.inheritable = 4294967295  511
kernel.version = #exynos5 SMP PREEMPT Tue Dec 27 20:10:55 UTC 2022
kernel.watchdog = 1
kernel.watchdog_cpumask = 0-7
kernel.watchdog_thresh = 10
kernel.yama.ptrace_scope = 1
net.core.busy_poll = 0
net.core.busy_read = 0
net.core.dev_weight = 64
net.core.dev_weight_rx_bias = 1
net.core.dev_weight_tx_bias = 1
net.core.devconf_inherit_init_net = 0
net.core.fb_tunnels_only_for_init_net = 0
net.core.flow_limit_cpu_bitmap = 00
net.core.flow_limit_table_len = 4096
net.core.gro_normal_batch = 8
net.core.high_order_alloc_disable = 0
net.core.max_skb_frags = 17
net.core.message_burst = 10
net.core.message_cost = 5
net.core.netdev_budget = 300
net.core.netdev_budget_usecs = 20000
net.core.netdev_max_backlog = 1000
net.core.netdev_rss_key = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
net.core.netdev_tstamp_prequeue = 1
net.core.netdev_unregister_timeout_secs = 10
net.core.optmem_max = 10240
net.core.rmem_default = 180224
net.core.rmem_max = 180224
net.core.rps_sock_flow_entries = 0
net.core.skb_defer_max = 64
net.core.somaxconn = 4096
net.core.tstamp_allow_data = 1
net.core.txrehash = 1
net.core.warnings = 0
net.core.wmem_default = 180224
net.core.wmem_max = 180224
net.core.xfrm_acq_expires = 30
net.core.xfrm_aevent_etime = 10
net.core.xfrm_aevent_rseqth = 2
net.core.xfrm_larval_drop = 1
net.ipv4.conf.all.accept_local = 0
net.ipv4.conf.all.accept_redirects = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.arp_accept = 0
net.ipv4.conf.all.arp_announce = 0
net.ipv4.conf.all.arp_evict_nocarrier = 1
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.arp_ignore = 0
net.ipv4.conf.all.arp_notify = 0
net.ipv4.conf.all.bc_forwarding = 0
net.ipv4.conf.all.bootp_relay = 0
net.ipv4.conf.all.disable_policy = 0
net.ipv4.conf.all.disable_xfrm = 0
net.ipv4.conf.all.drop_gratuitous_arp = 0
net.ipv4.conf.all.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.all.force_igmp_version = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.all.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.all.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.all.ignore_routes_with_linkdown = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.medium_id = 0
net.ipv4.conf.all.promote_secondaries = 0
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.proxy_arp_pvlan = 0
net.ipv4.conf.all.route_localnet = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.secure_redirects = 1
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.all.shared_media = 1
net.ipv4.conf.all.src_valid_mark = 0
net.ipv4.conf.all.tag = 0
net.ipv4.conf.default.accept_local = 0
net.ipv4.conf.default.accept_redirects = 1
net.ipv4.conf.default.accept_source_route = 1
net.ipv4.conf.default.arp_accept = 0
net.ipv4.conf.default.arp_announce = 0
net.ipv4.conf.default.arp_evict_nocarrier = 1
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.arp_ignore = 0
net.ipv4.conf.default.arp_notify = 0
net.ipv4.conf.default.bc_forwarding = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.disable_policy = 0
net.ipv4.conf.default.disable_xfrm = 0
net.ipv4.conf.default.drop_gratuitous_arp = 0
net.ipv4.conf.default.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.default.force_igmp_version = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.default.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.default.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.default.ignore_routes_with_linkdown = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.promote_secondaries = 0
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.proxy_arp_pvlan = 0
net.ipv4.conf.default.route_localnet = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.secure_redirects = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.src_valid_mark = 0
net.ipv4.conf.default.tag = 0
net.ipv4.conf.eth0.accept_local = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 1
net.ipv4.conf.eth0.arp_accept = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_evict_nocarrier = 1
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.arp_notify = 0
net.ipv4.conf.eth0.bc_forwarding = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.drop_gratuitous_arp = 0
net.ipv4.conf.eth0.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.eth0.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.eth0.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.eth0.ignore_routes_with_linkdown = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.promote_secondaries = 0
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.proxy_arp_pvlan = 0
net.ipv4.conf.eth0.route_localnet = 0
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.src_valid_mark = 0
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.lo.accept_local = 0
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.arp_accept = 0
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.lo.arp_evict_nocarrier = 1
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.arp_notify = 0
net.ipv4.conf.lo.bc_forwarding = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.disable_policy = 1
net.ipv4.conf.lo.disable_xfrm = 1
net.ipv4.conf.lo.drop_gratuitous_arp = 0
net.ipv4.conf.lo.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.lo.force_igmp_version = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.lo.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.lo.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.lo.ignore_routes_with_linkdown = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.promote_secondaries = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.proxy_arp_pvlan = 0
net.ipv4.conf.lo.route_localnet = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.src_valid_mark = 0
net.ipv4.conf.lo.tag = 0
net.ipv4.conf.sit0.accept_local = 0
net.ipv4.conf.sit0.accept_redirects = 1
net.ipv4.conf.sit0.accept_source_route = 1
net.ipv4.conf.sit0.arp_accept = 0
net.ipv4.conf.sit0.arp_announce = 0
net.ipv4.conf.sit0.arp_evict_nocarrier = 1
net.ipv4.conf.sit0.arp_filter = 0
net.ipv4.conf.sit0.arp_ignore = 0
net.ipv4.conf.sit0.arp_notify = 0
net.ipv4.conf.sit0.bc_forwarding = 0
net.ipv4.conf.sit0.bootp_relay = 0
net.ipv4.conf.sit0.disable_policy = 0
net.ipv4.conf.sit0.disable_xfrm = 0
net.ipv4.conf.sit0.drop_gratuitous_arp = 0
net.ipv4.conf.sit0.drop_unicast_in_l2_multicast = 0
net.ipv4.conf.sit0.force_igmp_version = 0
net.ipv4.conf.sit0.forwarding = 0
net.ipv4.conf.sit0.igmpv2_unsolicited_report_interval = 10000
net.ipv4.conf.sit0.igmpv3_unsolicited_report_interval = 1000
net.ipv4.conf.sit0.ignore_routes_with_linkdown = 0
net.ipv4.conf.sit0.log_martians = 0
net.ipv4.conf.sit0.mc_forwarding = 0
net.ipv4.conf.sit0.medium_id = 0
net.ipv4.conf.sit0.promote_secondaries = 0
net.ipv4.conf.sit0.proxy_arp = 0
net.ipv4.conf.sit0.proxy_arp_pvlan = 0
net.ipv4.conf.sit0.route_localnet = 0
net.ipv4.conf.sit0.rp_filter = 0
net.ipv4.conf.sit0.secure_redirects = 1
net.ipv4.conf.sit0.send_redirects = 1
net.ipv4.conf.sit0.shared_media = 1
net.ipv4.conf.sit0.src_valid_mark = 0
net.ipv4.conf.sit0.tag = 0
net.ipv4.fib_multipath_hash_fields = 7
net.ipv4.fib_multipath_hash_policy = 0
net.ipv4.fib_multipath_use_neigh = 0
net.ipv4.fib_notify_on_flag_change = 0
net.ipv4.fib_sync_mem = 524288
net.ipv4.fwmark_reflect = 0
net.ipv4.icmp_echo_enable_probe = 0
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_errors_use_inbound_ifaddr = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.icmp_msgs_burst = 50
net.ipv4.icmp_msgs_per_sec = 1000
net.ipv4.icmp_ratelimit = 1000
net.ipv4.icmp_ratemask = 6168
net.ipv4.igmp_link_local_mcast_reports = 1
net.ipv4.igmp_max_memberships = 20
net.ipv4.igmp_max_msf = 10
net.ipv4.igmp_qrv = 2
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_threshold = 65664
net.ipv4.ip_autobind_reuse = 0
net.ipv4.ip_default_ttl = 64
net.ipv4.ip_dynaddr = 0
net.ipv4.ip_early_demux = 1
net.ipv4.ip_forward = 0
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
net.ipv4.ip_local_port_range = 32768    60999
net.ipv4.ip_local_reserved_ports = 
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.ip_unprivileged_port_start = 1024
net.ipv4.ipfrag_high_thresh = 4194304
net.ipv4.ipfrag_low_thresh = 3145728
net.ipv4.ipfrag_max_dist = 64
net.ipv4.ipfrag_secret_interval = 0
net.ipv4.ipfrag_time = 30
net.ipv4.neigh.default.anycast_delay = 100
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.base_reachable_time_ms = 30000
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.interval_probe_time_ms = 5000
net.ipv4.neigh.default.locktime = 100
net.ipv4.neigh.default.mcast_resolicit = 0
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.neigh.default.proxy_delay = 80
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.retrans_time_ms = 1000
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.unres_qlen = 91
net.ipv4.neigh.default.unres_qlen_bytes = 180224
net.ipv4.neigh.eth0.anycast_delay = 100
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.base_reachable_time_ms = 30000
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.interval_probe_time_ms = 5000
net.ipv4.neigh.eth0.locktime = 100
net.ipv4.neigh.eth0.mcast_resolicit = 0
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.eth0.proxy_delay = 80
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.retrans_time_ms = 1000
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.unres_qlen = 91
net.ipv4.neigh.eth0.unres_qlen_bytes = 180224
net.ipv4.neigh.lo.anycast_delay = 100
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.base_reachable_time_ms = 30000
net.ipv4.neigh.lo.delay_first_probe_time = 5
net.ipv4.neigh.lo.gc_stale_time = 60
net.ipv4.neigh.lo.interval_probe_time_ms = 5000
net.ipv4.neigh.lo.locktime = 100
net.ipv4.neigh.lo.mcast_resolicit = 0
net.ipv4.neigh.lo.mcast_solicit = 3
net.ipv4.neigh.lo.proxy_delay = 80
net.ipv4.neigh.lo.proxy_qlen = 64
net.ipv4.neigh.lo.retrans_time_ms = 1000
net.ipv4.neigh.lo.ucast_solicit = 3
net.ipv4.neigh.lo.unres_qlen = 91
net.ipv4.neigh.lo.unres_qlen_bytes = 180224
net.ipv4.neigh.sit0.anycast_delay = 100
net.ipv4.neigh.sit0.app_solicit = 0
net.ipv4.neigh.sit0.base_reachable_time_ms = 30000
net.ipv4.neigh.sit0.delay_first_probe_time = 5
net.ipv4.neigh.sit0.gc_stale_time = 60
net.ipv4.neigh.sit0.interval_probe_time_ms = 5000
net.ipv4.neigh.sit0.locktime = 100
net.ipv4.neigh.sit0.mcast_resolicit = 0
net.ipv4.neigh.sit0.mcast_solicit = 3
net.ipv4.neigh.sit0.proxy_delay = 80
net.ipv4.neigh.sit0.proxy_qlen = 64
net.ipv4.neigh.sit0.retrans_time_ms = 1000
net.ipv4.neigh.sit0.ucast_solicit = 3
net.ipv4.neigh.sit0.unres_qlen = 91
net.ipv4.neigh.sit0.unres_qlen_bytes = 180224
net.ipv4.nexthop_compat_mode = 1
net.ipv4.ping_group_range = 1   0
net.ipv4.raw_l3mdev_accept = 1
net.ipv4.route.error_burst = 500
net.ipv4.route.error_cost = 100
net.ipv4.route.gc_elasticity = 8
net.ipv4.route.gc_interval = 60
net.ipv4.route.gc_min_interval = 0
net.ipv4.route.gc_min_interval_ms = 500
net.ipv4.route.gc_thresh = -1
net.ipv4.route.gc_timeout = 300
net.ipv4.route.max_size = 2147483647
net.ipv4.route.min_adv_mss = 256
net.ipv4.route.min_pmtu = 552
net.ipv4.route.mtu_expires = 600
net.ipv4.route.redirect_load = 2
net.ipv4.route.redirect_number = 9
net.ipv4.route.redirect_silence = 2048
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_adv_win_scale = 1
net.ipv4.tcp_allowed_congestion_control = reno
net.ipv4.tcp_app_win = 31
net.ipv4.tcp_autocorking = 1
net.ipv4.tcp_available_congestion_control = reno cubic
net.ipv4.tcp_available_ulp = tls
net.ipv4.tcp_base_mss = 1024
net.ipv4.tcp_challenge_ack_limit = 2147483647
net.ipv4.tcp_child_ehash_entries = 0
net.ipv4.tcp_comp_sack_delay_ns = 1000000
net.ipv4.tcp_comp_sack_nr = 44
net.ipv4.tcp_comp_sack_slack_ns = 100000
net.ipv4.tcp_congestion_control = reno
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_early_demux = 1
net.ipv4.tcp_early_retrans = 3
net.ipv4.tcp_ecn = 2
net.ipv4.tcp_ecn_fallback = 1
net.ipv4.tcp_ehash_entries = 8192
net.ipv4.tcp_fack = 0
net.ipv4.tcp_fastopen = 1
net.ipv4.tcp_fastopen_blackhole_timeout_sec = 0
net.ipv4.tcp_fastopen_key = 74a9c16c-86b0d52b-832844d0-a133259e
net.ipv4.tcp_fin_timeout = 60
net.ipv4.tcp_frto = 2
net.ipv4.tcp_fwmark_accept = 0
net.ipv4.tcp_invalid_ratelimit = 500
net.ipv4.tcp_keepalive_intvl = 75
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_time = 7200
net.ipv4.tcp_l3mdev_accept = 0
net.ipv4.tcp_limit_output_bytes = 1048576
net.ipv4.tcp_low_latency = 0
net.ipv4.tcp_max_orphans = 4096
net.ipv4.tcp_max_reordering = 300
net.ipv4.tcp_max_syn_backlog = 128
net.ipv4.tcp_max_tw_buckets = 4096
net.ipv4.tcp_mem = 8442 11257   16884
net.ipv4.tcp_migrate_req = 0
net.ipv4.tcp_min_rtt_wlen = 300
net.ipv4.tcp_min_snd_mss = 48
net.ipv4.tcp_min_tso_segs = 2
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_mtu_probe_floor = 48
net.ipv4.tcp_mtu_probing = 0
net.ipv4.tcp_no_metrics_save = 0
net.ipv4.tcp_no_ssthresh_metrics_save = 1
net.ipv4.tcp_notsent_lowat = 4294967295
net.ipv4.tcp_orphan_retries = 0
net.ipv4.tcp_pacing_ca_ratio = 120
net.ipv4.tcp_pacing_ss_ratio = 200
net.ipv4.tcp_probe_interval = 600
net.ipv4.tcp_probe_threshold = 8
net.ipv4.tcp_recovery = 1
net.ipv4.tcp_reflect_tos = 0
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_retrans_collapse = 1
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_rmem = 4096        131072  5763808
net.ipv4.tcp_sack = 1
net.ipv4.tcp_slow_start_after_idle = 1
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_syn_retries = 6
net.ipv4.tcp_synack_retries = 5
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_thin_linear_timeouts = 0
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tso_rtt_log = 9
net.ipv4.tcp_tso_win_divisor = 3
net.ipv4.tcp_tw_reuse = 2
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_wmem = 4096        16384   4194304
net.ipv4.tcp_workaround_signed_windows = 0
net.ipv4.udp_early_demux = 1
net.ipv4.udp_l3mdev_accept = 0
net.ipv4.udp_mem = 16884        22514   33768
net.ipv4.udp_rmem_min = 4096
net.ipv4.udp_wmem_min = 4096
net.ipv4.xfrm4_gc_thresh = 32768
net.netfilter.nf_log.0 = NONE
net.netfilter.nf_log.1 = NONE
net.netfilter.nf_log.10 = NONE
net.netfilter.nf_log.2 = NONE
net.netfilter.nf_log.3 = NONE
net.netfilter.nf_log.4 = NONE
net.netfilter.nf_log.5 = NONE
net.netfilter.nf_log.6 = NONE
net.netfilter.nf_log.7 = NONE
net.netfilter.nf_log.8 = NONE
net.netfilter.nf_log.9 = NONE
net.netfilter.nf_log_all_netns = 0
net.unix.max_dgram_qlen = 512
sunrpc.max_resvport = 1023
sunrpc.min_resvport = 665
sunrpc.tcp_fin_timeout = 15
sunrpc.tcp_max_slot_table_entries = 65536
sunrpc.tcp_slot_table_entries = 2
sunrpc.udp_slot_table_entries = 16
user.max_cgroup_namespaces = 14964
user.max_inotify_instances = 128
user.max_inotify_watches = 8192
user.max_ipc_namespaces = 14964
user.max_mnt_namespaces = 14964
user.max_net_namespaces = 14964
user.max_pid_namespaces = 14964
user.max_time_namespaces = 14964
user.max_user_namespaces = 14964
user.max_uts_namespaces = 14964
vm.admin_reserve_kbytes = 8192
vm.compact_unevictable_allowed = 1
vm.compaction_proactiveness = 20
vm.dirty_background_bytes = 0
vm.dirty_background_ratio = 10
vm.dirty_bytes = 0
vm.dirty_expire_centisecs = 3000
vm.dirty_ratio = 20
vm.dirty_writeback_centisecs = 500
vm.dirtytime_expire_seconds = 43200
vm.extfrag_threshold = 500
vm.highmem_is_dirtyable = 0
vm.laptop_mode = 0
vm.legacy_va_layout = 0
vm.lowmem_reserve_ratio = 32    0       0
vm.max_map_count = 65530
vm.min_free_kbytes = 3407
vm.mmap_min_addr = 4096
vm.mmap_rnd_bits = 8
vm.oom_dump_tasks = 1
vm.oom_kill_allocating_task = 0
vm.overcommit_kbytes = 0
vm.overcommit_memory = 0
vm.overcommit_ratio = 50
vm.page-cluster = 3
vm.page_lock_unfairness = 5
vm.panic_on_oom = 0
vm.percpu_pagelist_high_fraction = 0
vm.stat_interval = 1
vm.swappiness = 60
vm.user_reserve_kbytes = 62422
vm.vfs_cache_pressure = 100
vm.watermark_boost_factor = 15000
vm.watermark_scale_factor = 10

odro-volti · Post by **odro-volti** » Tue Jan 17, 2023 10:14 pm

...btw ipv6 is disabled in both installs (ipv6.disable=1 in kernel command line, in Armbian in addition in network interface configuration ipv6 is disabled).

mad_ady · Post by **mad_ady** » Tue Jan 17, 2023 11:50 pm

You should do a diff -u between both outputs, and see if anything suspicious pops up.

odro-volti · Post by **odro-volti** » Wed Jan 18, 2023 12:10 am

helpful?

Code: Select all

diff -u arm.txt deb.txt
--- arm.txt     2023-01-17 16:07:33.058315683 +0100
+++ deb.txt     2023-01-17 16:07:03.698038642 +0100
@@ -1,4 +1,3 @@
-debug.kprobes-optimization = 1
 dev.raid.speed_limit_max = 200000
 dev.raid.speed_limit_min = 1000
 dev.scsi.logging_level = 0
@@ -6,13 +5,13 @@
 fs.aio-max-nr = 65536
 fs.aio-nr = 0
 fs.binfmt_misc.status = enabled
-fs.dentry-state = 23151 5414    45      0       1512    0
+fs.dentry-state = 41429 12796   45      0       5195    0
 fs.dir-notify-enable = 1
-fs.epoll.max_user_watches = 253775
+fs.epoll.max_user_watches = 285735
 fs.file-max = 2147483647
-fs.file-nr = 1248       0       2147483647
-fs.inode-nr = 24328     2889
-fs.inode-state = 24318  2889    0       0       0       0       0
+fs.file-nr = 992        0       2147483647
+fs.inode-nr = 36530     445
+fs.inode-state = 36530  445     0       0       0       0       0
 fs.inotify.max_queued_events = 16384
 fs.inotify.max_user_instances = 128
 fs.inotify.max_user_watches = 8192
@@ -24,9 +23,18 @@
 fs.mqueue.msgsize_default = 8192
 fs.mqueue.msgsize_max = 8192
 fs.mqueue.queues_max = 256
+fs.nfs.idmap_cache_timeout = 600
+fs.nfs.nfs_callback_tcpport = 0
+fs.nfs.nfs_congestion_kb = 45376
+fs.nfs.nfs_mountpoint_timeout = 500
+fs.nfs.nlm_grace_period = 0
+fs.nfs.nlm_tcpport = 0
+fs.nfs.nlm_timeout = 10
+fs.nfs.nlm_udpport = 0
+fs.nfs.nsm_local_state = 0
+fs.nfs.nsm_use_hostnames = 0
 fs.nr_open = 1048576
-fs.overflowgid = 65534
-fs.overflowuid = 65534
+fs.ocfs2.nm.hb_ctl_path = /sbin/ocfs2_hb_ctl
 fs.pipe-max-size = 1048576
 fs.pipe-user-pages-hard = 0
 fs.pipe-user-pages-soft = 16384
@@ -40,15 +48,30 @@
 fs.quota.free_dquots = 0
 fs.quota.lookups = 0
 fs.quota.reads = 0
-fs.quota.syncs = 8
+fs.quota.syncs = 0
+fs.quota.warnings = 1
 fs.quota.writes = 0
 fs.suid_dumpable = 0
-fs.verity.require_signatures = 0
-kernel.acct = 4 2       30
+fs.xfs.error_level = 3
+fs.xfs.filestream_centisecs = 3000
+fs.xfs.inherit_noatime = 1
+fs.xfs.inherit_nodefrag = 1
+fs.xfs.inherit_nodump = 1
+fs.xfs.inherit_nosymlinks = 0
+fs.xfs.inherit_sync = 1
+fs.xfs.irix_sgid_inherit = 0
+fs.xfs.irix_symlink_mode = 0
+fs.xfs.panic_mask = 0
+fs.xfs.rotorstep = 1
+fs.xfs.speculative_cow_prealloc_lifetime = 300
+fs.xfs.speculative_prealloc_lifetime = 300
+fs.xfs.stats_clear = 0
+fs.xfs.xfssyncd_centisecs = 3000
+kernel.arch = armv7l
 kernel.auto_msgmni = 0
 kernel.bpf_stats_enabled = 0
 kernel.cad_pid = 1
-kernel.cap_last_cap = 37
+kernel.cap_last_cap = 40
 kernel.core_pattern = core
 kernel.core_pipe_limit = 0
 kernel.core_uses_pid = 0
@@ -56,23 +79,27 @@
 kernel.dmesg_restrict = 0
 kernel.domainname = (none)
 kernel.ftrace_dump_on_oops = 0
-kernel.hostname = odARMBbul60123
+kernel.hostname = fam50123
 kernel.hotplug =
 kernel.keys.gc_delay = 300
 kernel.keys.maxbytes = 20000
 kernel.keys.maxkeys = 200
-kernel.keys.persistent_keyring_expiry = 259200
 kernel.keys.root_maxbytes = 25000000
 kernel.keys.root_maxkeys = 1000000
 kernel.kptr_restrict = 0
 kernel.max_lock_depth = 1024
+kernel.max_rcu_stall_to_panic = 0
 kernel.modprobe = /sbin/modprobe
 kernel.modules_disabled = 0
+kernel.msg_next_id = -1
 kernel.msgmax = 8192
 kernel.msgmnb = 16384
 kernel.msgmni = 32000
 kernel.ngroups_max = 65536
-kernel.osrelease = 5.4.225-odroidxu4
+kernel.nmi_watchdog = 0
+kernel.ns_last_pid = 14019
+kernel.oops_all_cpu_backtrace = 0
+kernel.osrelease = 6.1.1-armmp-lpae
 kernel.ostype = Linux
 kernel.overflowgid = 65534
 kernel.overflowuid = 65534
@@ -90,50 +117,61 @@
 kernel.pid_max = 32768
 kernel.poweroff_cmd = /sbin/poweroff
 kernel.print-fatal-signals = 0
-kernel.printk = 1       4       1       7
+kernel.printk = 7       4       1       7
 kernel.printk_delay = 0
 kernel.printk_devkmsg = on
 kernel.printk_ratelimit = 5
 kernel.printk_ratelimit_burst = 10
+kernel.prove_locking = 1
 kernel.pty.max = 4096
 kernel.pty.nr = 1
 kernel.pty.reserve = 1024
-kernel.random.boot_id = 97c47573-46c9-4f5c-9124-2fee4c86fb75
+kernel.random.boot_id = 7483ffe5-933b-41dc-9855-a2efa82d2e75
 kernel.random.entropy_avail = 256
 kernel.random.poolsize = 256
 kernel.random.urandom_min_reseed_secs = 60
-kernel.random.uuid = caf37465-d7bd-4897-be79-e3230dff6f92
+kernel.random.uuid = a07d43b9-cd4f-4d1a-bc22-35cdfb04bf1f
 kernel.random.write_wakeup_threshold = 256
 kernel.randomize_va_space = 1
 kernel.real-root-dev = 0
 kernel.sched_cfs_bandwidth_slice_us = 5000
 kernel.sched_child_runs_first = 0
+kernel.sched_deadline_period_max_us = 4194304
+kernel.sched_deadline_period_min_us = 100
+kernel.sched_energy_aware = 1
 kernel.sched_rr_timeslice_ms = 100
 kernel.sched_rt_period_us = 1000000
 kernel.sched_rt_runtime_us = 950000
 kernel.seccomp.actions_avail = kill_process kill_thread trap errno user_notif trace log allow
 kernel.seccomp.actions_logged = kill_process kill_thread trap errno user_notif trace log
 kernel.sem = 32000      1024000000      500     32000
+kernel.sem_next_id = -1
+kernel.shm_next_id = -1
 kernel.shm_rmid_forced = 0
 kernel.shmall = 4278190079
 kernel.shmmax = 4278190079
 kernel.shmmni = 4096
+kernel.soft_watchdog = 1
+kernel.softlockup_all_cpu_backtrace = 0
+kernel.softlockup_panic = 0
 kernel.sysctl_writes_strict = 1
 kernel.sysrq = 1
 kernel.tainted = 0
-kernel.threads-max = 29309
+kernel.task_delayacct = 0
+kernel.threads-max = 29929
 kernel.timer_migration = 1
 kernel.traceoff_on_warning = 0
 kernel.tracepoint_printk = 0
-kernel.unprivileged_bpf_disabled = 0
-kernel.unprivileged_userns_apparmor_policy = 1
-kernel.usermodehelper.bset = 4294967295 63
-kernel.usermodehelper.inheritable = 4294967295  63
-kernel.version = #22.11.1 SMP PREEMPT Wed Nov 30 10:55:16 UTC 2022
+kernel.unprivileged_bpf_disabled = 2
+kernel.usermodehelper.bset = 4294967295 511
+kernel.usermodehelper.inheritable = 4294967295  511
+kernel.version = #exynos5 SMP PREEMPT Tue Dec 27 20:10:55 UTC 2022
+kernel.watchdog = 1
+kernel.watchdog_cpumask = 0-7
+kernel.watchdog_thresh = 10
 kernel.yama.ptrace_scope = 1
 net.core.busy_poll = 0
 net.core.busy_read = 0
-net.core.default_qdisc = pfifo_fast
 net.core.dev_weight = 64
 net.core.dev_weight_rx_bias = 1
 net.core.dev_weight_tx_bias = 1
@@ -151,12 +189,15 @@
 net.core.netdev_max_backlog = 1000
 net.core.netdev_rss_key = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
 net.core.netdev_tstamp_prequeue = 1
+net.core.netdev_unregister_timeout_secs = 10
 net.core.optmem_max = 10240
 net.core.rmem_default = 180224
 net.core.rmem_max = 180224
-net.core.rps_sock_flow_entries = 32768
+net.core.rps_sock_flow_entries = 0
+net.core.skb_defer_max = 64
 net.core.somaxconn = 4096
 net.core.tstamp_allow_data = 1
+net.core.txrehash = 1
 net.core.warnings = 0
 net.core.wmem_default = 180224
 net.core.wmem_max = 180224
@@ -164,15 +205,12 @@
 net.core.xfrm_aevent_etime = 10
 net.core.xfrm_aevent_rseqth = 2
 net.core.xfrm_larval_drop = 1
-net.ipv4.cipso_cache_bucket_size = 10
-net.ipv4.cipso_cache_enable = 1
-net.ipv4.cipso_rbm_optfmt = 0
-net.ipv4.cipso_rbm_strictvalid = 1
 net.ipv4.conf.all.accept_local = 0
 net.ipv4.conf.all.accept_redirects = 1
 net.ipv4.conf.all.accept_source_route = 0
 net.ipv4.conf.all.arp_accept = 0
 net.ipv4.conf.all.arp_announce = 0
+net.ipv4.conf.all.arp_evict_nocarrier = 1
 net.ipv4.conf.all.arp_filter = 0
 net.ipv4.conf.all.arp_ignore = 0
 net.ipv4.conf.all.arp_notify = 0
@@ -205,6 +243,7 @@
 net.ipv4.conf.default.accept_source_route = 1
 net.ipv4.conf.default.arp_accept = 0
 net.ipv4.conf.default.arp_announce = 0
+net.ipv4.conf.default.arp_evict_nocarrier = 1
 net.ipv4.conf.default.arp_filter = 0
 net.ipv4.conf.default.arp_ignore = 0
 net.ipv4.conf.default.arp_notify = 0
@@ -237,6 +276,7 @@
 net.ipv4.conf.eth0.accept_source_route = 1
 net.ipv4.conf.eth0.arp_accept = 0
 net.ipv4.conf.eth0.arp_announce = 0
+net.ipv4.conf.eth0.arp_evict_nocarrier = 1
 net.ipv4.conf.eth0.arp_filter = 0
 net.ipv4.conf.eth0.arp_ignore = 0
 net.ipv4.conf.eth0.arp_notify = 0
@@ -269,6 +309,7 @@
 net.ipv4.conf.lo.accept_source_route = 1
 net.ipv4.conf.lo.arp_accept = 0
 net.ipv4.conf.lo.arp_announce = 0
+net.ipv4.conf.lo.arp_evict_nocarrier = 1
 net.ipv4.conf.lo.arp_filter = 0
 net.ipv4.conf.lo.arp_ignore = 0
 net.ipv4.conf.lo.arp_notify = 0
@@ -296,10 +337,46 @@
 net.ipv4.conf.lo.shared_media = 1
 net.ipv4.conf.lo.src_valid_mark = 0
 net.ipv4.conf.lo.tag = 0
+net.ipv4.conf.sit0.accept_local = 0
+net.ipv4.conf.sit0.accept_redirects = 1
+net.ipv4.conf.sit0.accept_source_route = 1
+net.ipv4.conf.sit0.arp_accept = 0
+net.ipv4.conf.sit0.arp_announce = 0
+net.ipv4.conf.sit0.arp_evict_nocarrier = 1
+net.ipv4.conf.sit0.arp_filter = 0
+net.ipv4.conf.sit0.arp_ignore = 0
+net.ipv4.conf.sit0.arp_notify = 0
+net.ipv4.conf.sit0.bc_forwarding = 0
+net.ipv4.conf.sit0.bootp_relay = 0
+net.ipv4.conf.sit0.disable_policy = 0
+net.ipv4.conf.sit0.disable_xfrm = 0
+net.ipv4.conf.sit0.drop_gratuitous_arp = 0
+net.ipv4.conf.sit0.drop_unicast_in_l2_multicast = 0
+net.ipv4.conf.sit0.force_igmp_version = 0
+net.ipv4.conf.sit0.forwarding = 0
+net.ipv4.conf.sit0.igmpv2_unsolicited_report_interval = 10000
+net.ipv4.conf.sit0.igmpv3_unsolicited_report_interval = 1000
+net.ipv4.conf.sit0.ignore_routes_with_linkdown = 0
+net.ipv4.conf.sit0.log_martians = 0
+net.ipv4.conf.sit0.mc_forwarding = 0
+net.ipv4.conf.sit0.medium_id = 0
+net.ipv4.conf.sit0.promote_secondaries = 0
+net.ipv4.conf.sit0.proxy_arp = 0
+net.ipv4.conf.sit0.proxy_arp_pvlan = 0
+net.ipv4.conf.sit0.route_localnet = 0
+net.ipv4.conf.sit0.rp_filter = 0
+net.ipv4.conf.sit0.secure_redirects = 1
+net.ipv4.conf.sit0.send_redirects = 1
+net.ipv4.conf.sit0.shared_media = 1
+net.ipv4.conf.sit0.src_valid_mark = 0
+net.ipv4.conf.sit0.tag = 0
+net.ipv4.fib_multipath_hash_fields = 7
 net.ipv4.fib_multipath_hash_policy = 0
 net.ipv4.fib_multipath_use_neigh = 0
+net.ipv4.fib_notify_on_flag_change = 0
 net.ipv4.fib_sync_mem = 524288
 net.ipv4.fwmark_reflect = 0
+net.ipv4.icmp_echo_enable_probe = 0
 net.ipv4.icmp_echo_ignore_all = 0
 net.ipv4.icmp_echo_ignore_broadcasts = 1
 net.ipv4.icmp_errors_use_inbound_ifaddr = 0
@@ -315,6 +392,7 @@
 net.ipv4.inet_peer_maxttl = 600
 net.ipv4.inet_peer_minttl = 120
 net.ipv4.inet_peer_threshold = 65664
+net.ipv4.ip_autobind_reuse = 0
 net.ipv4.ip_default_ttl = 64
 net.ipv4.ip_dynaddr = 0
 net.ipv4.ip_early_demux = 1
@@ -340,6 +418,7 @@
 net.ipv4.neigh.default.gc_thresh1 = 128
 net.ipv4.neigh.default.gc_thresh2 = 512
 net.ipv4.neigh.default.gc_thresh3 = 1024
+net.ipv4.neigh.default.interval_probe_time_ms = 5000
 net.ipv4.neigh.default.locktime = 100
 net.ipv4.neigh.default.mcast_resolicit = 0
 net.ipv4.neigh.default.mcast_solicit = 3
@@ -354,6 +433,7 @@
 net.ipv4.neigh.eth0.base_reachable_time_ms = 30000
 net.ipv4.neigh.eth0.delay_first_probe_time = 5
 net.ipv4.neigh.eth0.gc_stale_time = 60
+net.ipv4.neigh.eth0.interval_probe_time_ms = 5000
 net.ipv4.neigh.eth0.locktime = 100
 net.ipv4.neigh.eth0.mcast_resolicit = 0
 net.ipv4.neigh.eth0.mcast_solicit = 3
@@ -368,6 +448,7 @@
 net.ipv4.neigh.lo.base_reachable_time_ms = 30000
 net.ipv4.neigh.lo.delay_first_probe_time = 5
 net.ipv4.neigh.lo.gc_stale_time = 60
+net.ipv4.neigh.lo.interval_probe_time_ms = 5000
 net.ipv4.neigh.lo.locktime = 100
 net.ipv4.neigh.lo.mcast_resolicit = 0
 net.ipv4.neigh.lo.mcast_solicit = 3
@@ -377,6 +458,22 @@
 net.ipv4.neigh.lo.ucast_solicit = 3
 net.ipv4.neigh.lo.unres_qlen = 91
 net.ipv4.neigh.lo.unres_qlen_bytes = 180224
+net.ipv4.neigh.sit0.anycast_delay = 100
+net.ipv4.neigh.sit0.app_solicit = 0
+net.ipv4.neigh.sit0.base_reachable_time_ms = 30000
+net.ipv4.neigh.sit0.delay_first_probe_time = 5
+net.ipv4.neigh.sit0.gc_stale_time = 60
+net.ipv4.neigh.sit0.interval_probe_time_ms = 5000
+net.ipv4.neigh.sit0.locktime = 100
+net.ipv4.neigh.sit0.mcast_resolicit = 0
+net.ipv4.neigh.sit0.mcast_solicit = 3
+net.ipv4.neigh.sit0.proxy_delay = 80
+net.ipv4.neigh.sit0.proxy_qlen = 64
+net.ipv4.neigh.sit0.retrans_time_ms = 1000
+net.ipv4.neigh.sit0.ucast_solicit = 3
+net.ipv4.neigh.sit0.unres_qlen = 91
+net.ipv4.neigh.sit0.unres_qlen_bytes = 180224
+net.ipv4.nexthop_compat_mode = 1
 net.ipv4.ping_group_range = 1   0
 net.ipv4.raw_l3mdev_accept = 1
 net.ipv4.route.error_burst = 500
@@ -396,25 +493,28 @@
 net.ipv4.route.redirect_silence = 2048
 net.ipv4.tcp_abort_on_overflow = 0
 net.ipv4.tcp_adv_win_scale = 1
-net.ipv4.tcp_allowed_congestion_control = reno cubic
+net.ipv4.tcp_allowed_congestion_control = reno
 net.ipv4.tcp_app_win = 31
 net.ipv4.tcp_autocorking = 1
 net.ipv4.tcp_available_congestion_control = reno cubic
-net.ipv4.tcp_available_ulp =
+net.ipv4.tcp_available_ulp = tls
 net.ipv4.tcp_base_mss = 1024
-net.ipv4.tcp_challenge_ack_limit = 1000
+net.ipv4.tcp_challenge_ack_limit = 2147483647
+net.ipv4.tcp_child_ehash_entries = 0
 net.ipv4.tcp_comp_sack_delay_ns = 1000000
 net.ipv4.tcp_comp_sack_nr = 44
-net.ipv4.tcp_congestion_control = cubic
+net.ipv4.tcp_comp_sack_slack_ns = 100000
+net.ipv4.tcp_congestion_control = reno
 net.ipv4.tcp_dsack = 1
 net.ipv4.tcp_early_demux = 1
 net.ipv4.tcp_early_retrans = 3
 net.ipv4.tcp_ecn = 2
 net.ipv4.tcp_ecn_fallback = 1
+net.ipv4.tcp_ehash_entries = 8192
 net.ipv4.tcp_fack = 0
 net.ipv4.tcp_fastopen = 1
-net.ipv4.tcp_fastopen_blackhole_timeout_sec = 3600
-net.ipv4.tcp_fastopen_key = 5ef8c632-35b4b8a3-bd33295f-4ba30e23
+net.ipv4.tcp_fastopen_blackhole_timeout_sec = 0
+net.ipv4.tcp_fastopen_key = 74a9c16c-86b0d52b-832844d0-a133259e
 net.ipv4.tcp_fin_timeout = 60
 net.ipv4.tcp_frto = 2
 net.ipv4.tcp_fwmark_accept = 0
@@ -429,7 +529,8 @@
 net.ipv4.tcp_max_reordering = 300
 net.ipv4.tcp_max_syn_backlog = 128
 net.ipv4.tcp_max_tw_buckets = 4096
-net.ipv4.tcp_mem = 8361 11150   16722
+net.ipv4.tcp_mem = 8442 11257   16884
+net.ipv4.tcp_migrate_req = 0
 net.ipv4.tcp_min_rtt_wlen = 300
 net.ipv4.tcp_min_snd_mss = 48
 net.ipv4.tcp_min_tso_segs = 2
@@ -437,6 +538,7 @@
 net.ipv4.tcp_mtu_probe_floor = 48
 net.ipv4.tcp_mtu_probing = 0
 net.ipv4.tcp_no_metrics_save = 0
+net.ipv4.tcp_no_ssthresh_metrics_save = 1
 net.ipv4.tcp_notsent_lowat = 4294967295
 net.ipv4.tcp_orphan_retries = 0
 net.ipv4.tcp_pacing_ca_ratio = 120
@@ -444,13 +546,13 @@
 net.ipv4.tcp_probe_interval = 600
 net.ipv4.tcp_probe_threshold = 8
 net.ipv4.tcp_recovery = 1
+net.ipv4.tcp_reflect_tos = 0
 net.ipv4.tcp_reordering = 3
 net.ipv4.tcp_retrans_collapse = 1
 net.ipv4.tcp_retries1 = 3
 net.ipv4.tcp_retries2 = 15
 net.ipv4.tcp_rfc1337 = 0
-net.ipv4.tcp_rmem = 4096        131072  5709056
-net.ipv4.tcp_rx_skb_cache = 0
+net.ipv4.tcp_rmem = 4096        131072  5763808
 net.ipv4.tcp_sack = 1
 net.ipv4.tcp_slow_start_after_idle = 1
 net.ipv4.tcp_stdurg = 0
@@ -459,305 +561,21 @@
 net.ipv4.tcp_syncookies = 1
 net.ipv4.tcp_thin_linear_timeouts = 0
 net.ipv4.tcp_timestamps = 1
+net.ipv4.tcp_tso_rtt_log = 9
 net.ipv4.tcp_tso_win_divisor = 3
 net.ipv4.tcp_tw_reuse = 2
-net.ipv4.tcp_tx_skb_cache = 0
 net.ipv4.tcp_window_scaling = 1
 net.ipv4.tcp_wmem = 4096        16384   4194304
 net.ipv4.tcp_workaround_signed_windows = 0
 net.ipv4.udp_early_demux = 1
 net.ipv4.udp_l3mdev_accept = 0
-net.ipv4.udp_mem = 16725        22301   33450
+net.ipv4.udp_mem = 16884        22514   33768
 net.ipv4.udp_rmem_min = 4096
 net.ipv4.udp_wmem_min = 4096
 net.ipv4.xfrm4_gc_thresh = 32768
-net.ipv6.anycast_src_echo_reply = 0
-net.ipv6.auto_flowlabels = 1
-net.ipv6.bindv6only = 0
-net.ipv6.calipso_cache_bucket_size = 10
-net.ipv6.calipso_cache_enable = 1
-net.ipv6.conf.all.accept_dad = 0
-net.ipv6.conf.all.accept_ra = 1
-net.ipv6.conf.all.accept_ra_defrtr = 1
-net.ipv6.conf.all.accept_ra_from_local = 0
-net.ipv6.conf.all.accept_ra_min_hop_limit = 1
-net.ipv6.conf.all.accept_ra_mtu = 1
-net.ipv6.conf.all.accept_ra_pinfo = 1
-net.ipv6.conf.all.accept_ra_rt_info_max_plen = 0
-net.ipv6.conf.all.accept_ra_rt_info_min_plen = 0
-net.ipv6.conf.all.accept_ra_rtr_pref = 1
-net.ipv6.conf.all.accept_redirects = 1
-net.ipv6.conf.all.accept_source_route = 0
-net.ipv6.conf.all.addr_gen_mode = 0
-net.ipv6.conf.all.autoconf = 1
-net.ipv6.conf.all.dad_transmits = 1
-net.ipv6.conf.all.disable_ipv6 = 0
-net.ipv6.conf.all.disable_policy = 0
-net.ipv6.conf.all.drop_unicast_in_l2_multicast = 0
-net.ipv6.conf.all.drop_unsolicited_na = 0
-net.ipv6.conf.all.enhanced_dad = 1
-net.ipv6.conf.all.force_mld_version = 0
-net.ipv6.conf.all.force_tllao = 0
-net.ipv6.conf.all.forwarding = 0
-net.ipv6.conf.all.hop_limit = 64
-net.ipv6.conf.all.ignore_routes_with_linkdown = 0
-net.ipv6.conf.all.keep_addr_on_down = 0
-net.ipv6.conf.all.max_addresses = 16
-net.ipv6.conf.all.max_desync_factor = 600
-net.ipv6.conf.all.mc_forwarding = 0
-net.ipv6.conf.all.mldv1_unsolicited_report_interval = 10000
-net.ipv6.conf.all.mldv2_unsolicited_report_interval = 1000
-net.ipv6.conf.all.mtu = 1280
-net.ipv6.conf.all.ndisc_notify = 0
-net.ipv6.conf.all.ndisc_tclass = 0
-net.ipv6.conf.all.optimistic_dad = 0
-net.ipv6.conf.all.proxy_ndp = 0
-net.ipv6.conf.all.regen_max_retry = 3
-net.ipv6.conf.all.router_probe_interval = 60
-net.ipv6.conf.all.router_solicitation_delay = 1
-net.ipv6.conf.all.router_solicitation_interval = 4
-net.ipv6.conf.all.router_solicitation_max_interval = 3600
-net.ipv6.conf.all.router_solicitations = -1
-net.ipv6.conf.all.seg6_enabled = 0
-net.ipv6.conf.all.suppress_frag_ndisc = 1
-net.ipv6.conf.all.temp_prefered_lft = 86400
-net.ipv6.conf.all.temp_valid_lft = 604800
-net.ipv6.conf.all.use_oif_addrs_only = 0
-net.ipv6.conf.all.use_optimistic = 0
-net.ipv6.conf.all.use_tempaddr = 0
-net.ipv6.conf.default.accept_dad = 1
-net.ipv6.conf.default.accept_ra = 1
-net.ipv6.conf.default.accept_ra_defrtr = 1
-net.ipv6.conf.default.accept_ra_from_local = 0
-net.ipv6.conf.default.accept_ra_min_hop_limit = 1
-net.ipv6.conf.default.accept_ra_mtu = 1
-net.ipv6.conf.default.accept_ra_pinfo = 1
-net.ipv6.conf.default.accept_ra_rt_info_max_plen = 0
-net.ipv6.conf.default.accept_ra_rt_info_min_plen = 0
-net.ipv6.conf.default.accept_ra_rtr_pref = 1
-net.ipv6.conf.default.accept_redirects = 1
-net.ipv6.conf.default.accept_source_route = 0
-net.ipv6.conf.default.addr_gen_mode = 0
-net.ipv6.conf.default.autoconf = 1
-net.ipv6.conf.default.dad_transmits = 1
-net.ipv6.conf.default.disable_ipv6 = 0
-net.ipv6.conf.default.disable_policy = 0
-net.ipv6.conf.default.drop_unicast_in_l2_multicast = 0
-net.ipv6.conf.default.drop_unsolicited_na = 0
-net.ipv6.conf.default.enhanced_dad = 1
-net.ipv6.conf.default.force_mld_version = 0
-net.ipv6.conf.default.force_tllao = 0
-net.ipv6.conf.default.forwarding = 0
-net.ipv6.conf.default.hop_limit = 64
-net.ipv6.conf.default.ignore_routes_with_linkdown = 0
-net.ipv6.conf.default.keep_addr_on_down = 0
-net.ipv6.conf.default.max_addresses = 16
-net.ipv6.conf.default.max_desync_factor = 600
-net.ipv6.conf.default.mc_forwarding = 0
-net.ipv6.conf.default.mldv1_unsolicited_report_interval = 10000
-net.ipv6.conf.default.mldv2_unsolicited_report_interval = 1000
-net.ipv6.conf.default.mtu = 1280
-net.ipv6.conf.default.ndisc_notify = 0
-net.ipv6.conf.default.ndisc_tclass = 0
-net.ipv6.conf.default.optimistic_dad = 0
-net.ipv6.conf.default.proxy_ndp = 0
-net.ipv6.conf.default.regen_max_retry = 3
-net.ipv6.conf.default.router_probe_interval = 60
-net.ipv6.conf.default.router_solicitation_delay = 1
-net.ipv6.conf.default.router_solicitation_interval = 4
-net.ipv6.conf.default.router_solicitation_max_interval = 3600
-net.ipv6.conf.default.router_solicitations = -1
-net.ipv6.conf.default.seg6_enabled = 0
-net.ipv6.conf.default.suppress_frag_ndisc = 1
-net.ipv6.conf.default.temp_prefered_lft = 86400
-net.ipv6.conf.default.temp_valid_lft = 604800
-net.ipv6.conf.default.use_oif_addrs_only = 0
-net.ipv6.conf.default.use_optimistic = 0
-net.ipv6.conf.default.use_tempaddr = 0
-net.ipv6.conf.eth0.accept_dad = 1
-net.ipv6.conf.eth0.accept_ra = 0
-net.ipv6.conf.eth0.accept_ra_defrtr = 1
-net.ipv6.conf.eth0.accept_ra_from_local = 0
-net.ipv6.conf.eth0.accept_ra_min_hop_limit = 1
-net.ipv6.conf.eth0.accept_ra_mtu = 1
-net.ipv6.conf.eth0.accept_ra_pinfo = 1
-net.ipv6.conf.eth0.accept_ra_rt_info_max_plen = 0
-net.ipv6.conf.eth0.accept_ra_rt_info_min_plen = 0
-net.ipv6.conf.eth0.accept_ra_rtr_pref = 1
-net.ipv6.conf.eth0.accept_redirects = 1
-net.ipv6.conf.eth0.accept_source_route = 0
-net.ipv6.conf.eth0.addr_gen_mode = 1
-net.ipv6.conf.eth0.autoconf = 1
-net.ipv6.conf.eth0.dad_transmits = 1
-net.ipv6.conf.eth0.disable_ipv6 = 1
-net.ipv6.conf.eth0.disable_policy = 0
-net.ipv6.conf.eth0.drop_unicast_in_l2_multicast = 0
-net.ipv6.conf.eth0.drop_unsolicited_na = 0
-net.ipv6.conf.eth0.enhanced_dad = 1
-net.ipv6.conf.eth0.force_mld_version = 0
-net.ipv6.conf.eth0.force_tllao = 0
-net.ipv6.conf.eth0.forwarding = 0
-net.ipv6.conf.eth0.hop_limit = 64
-net.ipv6.conf.eth0.ignore_routes_with_linkdown = 0
-net.ipv6.conf.eth0.keep_addr_on_down = 0
-net.ipv6.conf.eth0.max_addresses = 16
-net.ipv6.conf.eth0.max_desync_factor = 600
-net.ipv6.conf.eth0.mc_forwarding = 0
-net.ipv6.conf.eth0.mldv1_unsolicited_report_interval = 10000
-net.ipv6.conf.eth0.mldv2_unsolicited_report_interval = 1000
-net.ipv6.conf.eth0.mtu = 1500
-net.ipv6.conf.eth0.ndisc_notify = 0
-net.ipv6.conf.eth0.ndisc_tclass = 0
-net.ipv6.conf.eth0.optimistic_dad = 0
-net.ipv6.conf.eth0.proxy_ndp = 0
-net.ipv6.conf.eth0.regen_max_retry = 3
-net.ipv6.conf.eth0.router_probe_interval = 60
-net.ipv6.conf.eth0.router_solicitation_delay = 1
-net.ipv6.conf.eth0.router_solicitation_interval = 4
-net.ipv6.conf.eth0.router_solicitation_max_interval = 3600
-net.ipv6.conf.eth0.router_solicitations = -1
-net.ipv6.conf.eth0.seg6_enabled = 0
-net.ipv6.conf.eth0.suppress_frag_ndisc = 1
-net.ipv6.conf.eth0.temp_prefered_lft = 86400
-net.ipv6.conf.eth0.temp_valid_lft = 604800
-net.ipv6.conf.eth0.use_oif_addrs_only = 0
-net.ipv6.conf.eth0.use_optimistic = 0
-net.ipv6.conf.eth0.use_tempaddr = 0
-net.ipv6.conf.lo.accept_dad = -1
-net.ipv6.conf.lo.accept_ra = 1
-net.ipv6.conf.lo.accept_ra_defrtr = 1
-net.ipv6.conf.lo.accept_ra_from_local = 0
-net.ipv6.conf.lo.accept_ra_min_hop_limit = 1
-net.ipv6.conf.lo.accept_ra_mtu = 1
-net.ipv6.conf.lo.accept_ra_pinfo = 1
-net.ipv6.conf.lo.accept_ra_rt_info_max_plen = 0
-net.ipv6.conf.lo.accept_ra_rt_info_min_plen = 0
-net.ipv6.conf.lo.accept_ra_rtr_pref = 1
-net.ipv6.conf.lo.accept_redirects = 1
-net.ipv6.conf.lo.accept_source_route = 0
-net.ipv6.conf.lo.addr_gen_mode = 0
-net.ipv6.conf.lo.autoconf = 1
-net.ipv6.conf.lo.dad_transmits = 1
-net.ipv6.conf.lo.disable_ipv6 = 0
-net.ipv6.conf.lo.disable_policy = 0
-net.ipv6.conf.lo.drop_unicast_in_l2_multicast = 0
-net.ipv6.conf.lo.drop_unsolicited_na = 0
-net.ipv6.conf.lo.enhanced_dad = 1
-net.ipv6.conf.lo.force_mld_version = 0
-net.ipv6.conf.lo.force_tllao = 0
-net.ipv6.conf.lo.forwarding = 0
-net.ipv6.conf.lo.hop_limit = 64
-net.ipv6.conf.lo.ignore_routes_with_linkdown = 0
-net.ipv6.conf.lo.keep_addr_on_down = 0
-net.ipv6.conf.lo.max_addresses = 16
-net.ipv6.conf.lo.max_desync_factor = 600
-net.ipv6.conf.lo.mc_forwarding = 0
-net.ipv6.conf.lo.mldv1_unsolicited_report_interval = 10000
-net.ipv6.conf.lo.mldv2_unsolicited_report_interval = 1000
-net.ipv6.conf.lo.mtu = 65536
-net.ipv6.conf.lo.ndisc_notify = 0
-net.ipv6.conf.lo.ndisc_tclass = 0
-net.ipv6.conf.lo.optimistic_dad = 0
-net.ipv6.conf.lo.proxy_ndp = 0
-net.ipv6.conf.lo.regen_max_retry = 3
-net.ipv6.conf.lo.router_probe_interval = 60
-net.ipv6.conf.lo.router_solicitation_delay = 1
-net.ipv6.conf.lo.router_solicitation_interval = 4
-net.ipv6.conf.lo.router_solicitation_max_interval = 3600
-net.ipv6.conf.lo.router_solicitations = -1
-net.ipv6.conf.lo.seg6_enabled = 0
-net.ipv6.conf.lo.suppress_frag_ndisc = 1
-net.ipv6.conf.lo.temp_prefered_lft = 86400
-net.ipv6.conf.lo.temp_valid_lft = 604800
-net.ipv6.conf.lo.use_oif_addrs_only = 0
-net.ipv6.conf.lo.use_optimistic = 0
-net.ipv6.conf.lo.use_tempaddr = -1
-net.ipv6.fib_multipath_hash_policy = 0
-net.ipv6.flowlabel_consistency = 1
-net.ipv6.flowlabel_reflect = 0
-net.ipv6.flowlabel_state_ranges = 0
-net.ipv6.fwmark_reflect = 0
-net.ipv6.icmp.echo_ignore_all = 0
-net.ipv6.icmp.echo_ignore_anycast = 0
-net.ipv6.icmp.echo_ignore_multicast = 0
-net.ipv6.icmp.ratelimit = 1000
-net.ipv6.icmp.ratemask = 0-1,3-127
-net.ipv6.idgen_delay = 1
-net.ipv6.idgen_retries = 3
-net.ipv6.ip6frag_high_thresh = 4194304
-net.ipv6.ip6frag_low_thresh = 3145728
-net.ipv6.ip6frag_secret_interval = 0
-net.ipv6.ip6frag_time = 60
-net.ipv6.ip_nonlocal_bind = 0
-net.ipv6.max_dst_opts_length = 2147483647
-net.ipv6.max_dst_opts_number = 8
-net.ipv6.max_hbh_length = 2147483647
-net.ipv6.max_hbh_opts_number = 8
-net.ipv6.mld_max_msf = 64
-net.ipv6.mld_qrv = 2
-net.ipv6.neigh.default.anycast_delay = 100
-net.ipv6.neigh.default.app_solicit = 0
-net.ipv6.neigh.default.base_reachable_time_ms = 30000
-net.ipv6.neigh.default.delay_first_probe_time = 5
-net.ipv6.neigh.default.gc_interval = 30
-net.ipv6.neigh.default.gc_stale_time = 60
-net.ipv6.neigh.default.gc_thresh1 = 128
-net.ipv6.neigh.default.gc_thresh2 = 512
-net.ipv6.neigh.default.gc_thresh3 = 1024
-net.ipv6.neigh.default.locktime = 0
-net.ipv6.neigh.default.mcast_resolicit = 0
-net.ipv6.neigh.default.mcast_solicit = 3
-net.ipv6.neigh.default.proxy_delay = 80
-net.ipv6.neigh.default.proxy_qlen = 64
-net.ipv6.neigh.default.retrans_time_ms = 1000
-net.ipv6.neigh.default.ucast_solicit = 3
-net.ipv6.neigh.default.unres_qlen = 91
-net.ipv6.neigh.default.unres_qlen_bytes = 180224
-net.ipv6.neigh.eth0.anycast_delay = 100
-net.ipv6.neigh.eth0.app_solicit = 0
-net.ipv6.neigh.eth0.base_reachable_time_ms = 30000
-net.ipv6.neigh.eth0.delay_first_probe_time = 5
-net.ipv6.neigh.eth0.gc_stale_time = 60
-net.ipv6.neigh.eth0.locktime = 0
-net.ipv6.neigh.eth0.mcast_resolicit = 0
-net.ipv6.neigh.eth0.mcast_solicit = 3
-net.ipv6.neigh.eth0.proxy_delay = 80
-net.ipv6.neigh.eth0.proxy_qlen = 64
-net.ipv6.neigh.eth0.retrans_time_ms = 1000
-net.ipv6.neigh.eth0.ucast_solicit = 3
-net.ipv6.neigh.eth0.unres_qlen = 91
-net.ipv6.neigh.eth0.unres_qlen_bytes = 180224
-net.ipv6.neigh.lo.anycast_delay = 100
-net.ipv6.neigh.lo.app_solicit = 0
-net.ipv6.neigh.lo.base_reachable_time_ms = 30000
-net.ipv6.neigh.lo.delay_first_probe_time = 5
-net.ipv6.neigh.lo.gc_stale_time = 60
-net.ipv6.neigh.lo.locktime = 0
-net.ipv6.neigh.lo.mcast_resolicit = 0
-net.ipv6.neigh.lo.mcast_solicit = 3
-net.ipv6.neigh.lo.proxy_delay = 80
-net.ipv6.neigh.lo.proxy_qlen = 64
-net.ipv6.neigh.lo.retrans_time_ms = 1000
-net.ipv6.neigh.lo.ucast_solicit = 3
-net.ipv6.neigh.lo.unres_qlen = 91
-net.ipv6.neigh.lo.unres_qlen_bytes = 180224
-net.ipv6.route.gc_elasticity = 9
-net.ipv6.route.gc_interval = 30
-net.ipv6.route.gc_min_interval = 0
-net.ipv6.route.gc_min_interval_ms = 500
-net.ipv6.route.gc_thresh = 1024
-net.ipv6.route.gc_timeout = 60
-net.ipv6.route.max_size = 4096
-net.ipv6.route.min_adv_mss = 1220
-net.ipv6.route.mtu_expires = 600
-net.ipv6.route.skip_notify_on_dev_down = 0
-net.ipv6.seg6_flowlabel = 0
-net.ipv6.xfrm6_gc_thresh = 32768
 net.netfilter.nf_log.0 = NONE
 net.netfilter.nf_log.1 = NONE
 net.netfilter.nf_log.10 = NONE
-net.netfilter.nf_log.11 = NONE
-net.netfilter.nf_log.12 = NONE
 net.netfilter.nf_log.2 = NONE
 net.netfilter.nf_log.3 = NONE
 net.netfilter.nf_log.4 = NONE
@@ -770,28 +588,23 @@
 net.unix.max_dgram_qlen = 512
 sunrpc.max_resvport = 1023
 sunrpc.min_resvport = 665
-sunrpc.nfs_debug = 0x0000
-sunrpc.nfsd_debug = 0x0000
-sunrpc.nlm_debug = 0x0000
-sunrpc.rpc_debug = 0x0000
 sunrpc.tcp_fin_timeout = 15
 sunrpc.tcp_max_slot_table_entries = 65536
 sunrpc.tcp_slot_table_entries = 2
-sunrpc.transports = tcp 1048576
-sunrpc.transports = udp 32768
 sunrpc.udp_slot_table_entries = 16
-user.max_cgroup_namespaces = 14654
+user.max_cgroup_namespaces = 14964
 user.max_inotify_instances = 128
 user.max_inotify_watches = 8192
-user.max_ipc_namespaces = 14654
-user.max_mnt_namespaces = 14654
-user.max_net_namespaces = 14654
-user.max_pid_namespaces = 14654
-user.max_user_namespaces = 14654
-user.max_uts_namespaces = 14654
+user.max_ipc_namespaces = 14964
+user.max_mnt_namespaces = 14964
+user.max_net_namespaces = 14964
+user.max_pid_namespaces = 14964
+user.max_time_namespaces = 14964
+user.max_user_namespaces = 14964
+user.max_uts_namespaces = 14964
 vm.admin_reserve_kbytes = 8192
-vm.block_dump = 0
 vm.compact_unevictable_allowed = 1
+vm.compaction_proactiveness = 20
 vm.dirty_background_bytes = 0
 vm.dirty_background_ratio = 10
 vm.dirty_bytes = 0
@@ -805,7 +618,7 @@
 vm.legacy_va_layout = 0
 vm.lowmem_reserve_ratio = 32    0       0
 vm.max_map_count = 65530
-vm.min_free_kbytes = 3391
+vm.min_free_kbytes = 3407
 vm.mmap_min_addr = 4096
 vm.mmap_rnd_bits = 8
 vm.oom_dump_tasks = 1
@@ -813,12 +626,13 @@
 vm.overcommit_kbytes = 0
 vm.overcommit_memory = 0
 vm.overcommit_ratio = 50
-vm.page-cluster = 0
+vm.page-cluster = 3
+vm.page_lock_unfairness = 5
 vm.panic_on_oom = 0
-vm.percpu_pagelist_fraction = 0
+vm.percpu_pagelist_high_fraction = 0
 vm.stat_interval = 1
-vm.swappiness = 100
-vm.user_reserve_kbytes = 62410
+vm.swappiness = 60
+vm.user_reserve_kbytes = 62422
 vm.vfs_cache_pressure = 100
 vm.watermark_boost_factor = 15000
 vm.watermark_scale_factor = 10

mad_ady · Post by **mad_ady** » Wed Jan 18, 2023 12:27 am

Well, can't see anything obviously wrong. vm.swappiness is different and could affect performance - Maybe try changing it.
Other than that -

net.ipv4.tcp_challenge_ack_limit = 1000
+net.ipv4.tcp_challenge_ack_limit = 2147483647

This differs widely. Not sure what it does...

odro-volti · Post by **odro-volti** » Wed Jan 18, 2023 12:41 am

https://sysctl-explorer.net/net/ipv4/tc ... ack_limit/

and RE:swap

https://linuxhint.com/understanding_vm_swappiness/

Debian has lower swappiness (60) than Armbian (100). Set swappiness to 100 on Debian, no change in samba performance...

For me that's completely above my paygrade

meveric · Post by **meveric** » Wed Jan 18, 2023 2:52 am

first by default there is no swap partition on the image, so changing swappiness for non-existing swap partition will have no effect.
Aggressive swapping normally results in a decrease of overall performance, in fact if possible you should not use swap at all.
And the swappiness depends on the type of swap you're using, if you swap on SD/eMMC you want as little swapping as possible as you going to ruin your SD/eMMC very quickly.
HDD swapping will not necessarily result in a broken harddrive, but HDDs are normally rather slow so you loose a good chunk of performance.
Using zram you can use higher swappiness as it will do it completely in RAM and don't write on physical media, still swapping costs time and reduces overall performance.

Overall swapping has nothing to do with network traffic.
Swap should never be touched for this.