ODROID HC1 and a lot of "ERROR unknown event type 37"

Post Reply
chrisvv
Posts: 1
Joined: Thu Oct 04, 2018 1:28 am
languages_spoken: english polish
ODROIDs: C2, HC1
Has thanked: 0
Been thanked: 0
Contact:

ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by chrisvv » Tue Oct 09, 2018 5:46 pm

Hi All,

on one of my HC1's I'm getting a lot of "xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37" messages in kernel logs.

The HC1 runs under Armbian (Debian 9.5 based) with microSD card as boot device, and the rest of the system on SSD SATA drive, Only Ethernet port is used, no other peripherals connected.
I have no stability issues or any other errors. Everything works as expected, but I'm getting tons of such messages:

Code: Select all

Oct  8 23:58:54 srv kernel: [16618.555870] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 05:00:04 srv kernel: [34688.258031] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 05:24:43 srv kernel: [36167.193530] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 05:25:42 srv kernel: [36226.031479] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 06:18:12 srv kernel: [39376.290934] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 06:25:46 srv kernel: [39830.520471] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 07:22:43 srv kernel: [43247.033257] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 08:29:05 srv kernel: [47229.238284] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 10:09:41 srv kernel: [53265.632128] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Oct  9 10:32:30 srv kernel: [54634.582983] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
Some system info:

Current kernel version:

Code: Select all

Linux srv 4.14.69-odroidxu4 #34 SMP PREEMPT Wed Sep 19 12:45:24 CEST 2018 armv7l GNU/Linux
lsusb output:

Code: Select all

# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
lsblk output:

Code: Select all

# lsblk 
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda           8:0    0 223,6G  0 disk 
└─sda1        8:1    0 223,6G  0 part /
mmcblk1     179:0    0  14,5G  0 disk 
└─mmcblk1p1 179:1    0  14,3G  0 part /media/mmcboot
Is it dangerous, or can I ignore these messages?

-Chris

User avatar
mad_ady
Posts: 6136
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, N1, H2, N2
Location: Bucharest, Romania
Has thanked: 118 times
Been thanked: 81 times
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by mad_ady » Tue Oct 09, 2018 9:40 pm

I get it on xu4 as well. In the past it would cause the usb bus to reset, but now they are ignored. So it's fine

jeanmarc
Posts: 11
Joined: Tue Mar 05, 2019 9:02 pm
languages_spoken: english
ODROIDs: 2 Odroid HC1 boards with 250 GB SSD disk with standard kernel.org kernel Odroid N2 board
Location: near Paris
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by jeanmarc » Tue Mar 05, 2019 9:38 pm

Hi,
I have following error

Code: Select all

[  428.033904] cfg80211: Loading compiled-in X.509 certificates for regulatory database                                                         
[  428.052664] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'                                                                       
[  428.057927] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2                                               
[  428.066347] cfg80211: failed to load regulatory.db                                                                                           
[  909.013658] Alignment trap: not handling instruction e8503f00 at [<b6f4e696>]                                                                
[  909.019416] Unhandled fault: alignment exception (0x011) at 0x005f7c1f                                                                       
[  909.025989] pgd = d78cfbb9                                                                                                                   
[  909.028532] [005f7c1f] *pgd=b5e17835                                                                                                         
[ 3579.712578] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37                                                                            
[ 3607.692464] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37                           

I have the same issue on my HC1 board.
My SDD SATA disc is :

Code: Select all


ansible@srv-hc1-110:~$ sudo fdisk -l /dev/sda
Disk /dev/sda: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
Disklabel type: dos
Disk identifier: 0xa0dfc027

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1            2048   6141951   6139904     3G 83 Linux
/dev/sda2         6144000 468862127 462718128 220.7G  f W95 Ext'd (LBA)
/dev/sda5         6146048  12287999   6141952     3G 8e Linux LVM
/dev/sda6        12290048  18431999   6141952     3G 8e Linux LVM
/dev/sda7        18434048  24575999   6141952     3G 8e Linux LVM
/dev/sda8        24578048  30719999   6141952     3G 8e Linux LVM
/dev/sda9        30722048  36863999   6141952     3G 8e Linux LVM
/dev/sda10       36866048  43007999   6141952     3G 8e Linux LVM
/dev/sda11       43010048  49151999   6141952     3G 8e Linux LVM
/dev/sda12       49154048  55295999   6141952     3G 8e Linux LVM
/dev/sda13       55298048  61439999   6141952     3G 8e Linux LVM
/dev/sda14       61442048  67583999   6141952     3G 8e Linux LVM
/dev/sda15       67586048  73727999   6141952     3G 8e Linux LVM
/dev/sda16       73730048  79871999   6141952     3G 8e Linux LVM
/dev/sda17       79874048  86015999   6141952     3G 8e Linux LVM
/dev/sda18       86018048  92159999   6141952     3G 8e Linux LVM
/dev/sda19       92162048  98303999   6141952     3G 8e Linux LVM
/dev/sda20       98306048 104447999   6141952     3G 8e Linux LVM
/dev/sda21      104450048 110591999   6141952     3G 8e Linux LVM
/dev/sda22      110594048 131071999  20477952   9.8G 8e Linux LVM
/dev/sda23      131074048 151551999  20477952   9.8G 8e Linux LVM
/dev/sda24      151554048 172031999  20477952   9.8G 8e Linux LVM
/dev/sda25      172034048 192511999  20477952   9.8G 8e Linux LVM
/dev/sda26      192514048 212991999  20477952   9.8G 8e Linux LVM
/dev/sda27      212994048 233471999  20477952   9.8G 8e Linux LVM
/dev/sda28      233474048 253951999  20477952   9.8G 8e Linux LVM
/dev/sda29      253954048 274431999  20477952   9.8G 8e Linux LVM
/dev/sda30      274434048 335871999  61437952  29.3G 8e Linux LVM
/dev/sda31      335874048 397311999  61437952  29.3G 8e Linux LVM
/dev/sda32      397314048 458751999  61437952  29.3G 8e Linux LVM
/dev/sda33      458754048 468862127  10108080   4.8G 8e Linux LVM
ansible@srv-hc1-110:~$ 

As it seems there is perhaps one other issue on sata/usb3 driver because when using smartd tools,
i have one error, thanks to look at :


https://www.smartmontools.org/ticket/1161


So that today, in order to use smartcl, i use following command
When using 'pseudo driver' sat with smartmontools, then i have ....

Code: Select all

ansible@srv-hc1-110:~$ sudo smartctl -d sat  -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.20.10] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KingDian S280 240GB
Serial Number:    2018032302667
Firmware Version: Q0720A
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Mar  5 12:22:12 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x71) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   2) minutes.
Conveyance self-test routine
recommended polling time:        (   1) minutes.
SCT capabilities:              (0x0035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      -       0
  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      -       609
 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      -       327
160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       86
163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       10
164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       26688
165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       36
166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       15
168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1000
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       99
175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age   Offline      -       0
176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age   Offline      -       0
177 Wear_Leveling_Count     0x0000   100   100   050    Old_age   Offline      -       102
178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age   Offline      -       0
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      -       52
194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      -       49
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      -       0
196 Reallocated_Event_Count 0x0000   100   100   016    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age   Offline      -       0
232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      -       100
241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       73405
242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      -       186011
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       106752

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
    6        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ansible@srv-hc1-110:~$ 
My kernel release is based on one standard vanilla kernel 4.20.10 with sandard Debian package made by me

Code: Select all


ansible@srv-hc1-110:~$ uname -a
Linux srv-hc1-110 4.20.10 #1 SMP PREEMPT Sun Feb 17 20:24:27 UTC 2019 armv7l GNU/Linux
ansible@srv-hc1-110:~$ 

I hope that all parameters are ok in this kernel because ...

Code: Select all

ansible@srv-hc1-110:~$ grep -i samsung /boot/config-4.20.10 
CONFIG_PLAT_SAMSUNG=y
# Samsung Common options
# CONFIG_NET_VENDOR_SAMSUNG is not set
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_PINCTRL_SAMSUNG=y
# Samsung thermal drivers
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
CONFIG_VIDEO_SAMSUNG_S5P_CEC=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SAMSUNG_PCM=y
CONFIG_SND_SAMSUNG_SPDIF=m
CONFIG_SND_SAMSUNG_I2S=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
CONFIG_HID_SAMSUNG=m
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
CONFIG_SOC_SAMSUNG=y
CONFIG_SAMSUNG_MC=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PHY_SAMSUNG_USB2=y

Furthermore, when booting, i have also stranges errors in console,

Code: Select all

ansible@srv-hc1-110:~$ sudo dmesg 
[  359.050876] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=163577344
[  359.081115] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=163577344
[  359.081461] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=163577344
[  359.114908] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=163577344
[  359.118054] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=884997632
[  359.148710] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=884997632
[  359.149055] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=884997632
[  359.182498] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=884997632
[  359.185515] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1002438144
[  359.216380] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1002438144
[  359.216687] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1002438144
[  359.250347] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1002438144
[  359.253466] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1153433088
[  359.284310] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1153433088
[  359.284611] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1153433088
[  359.318290] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1153433088
[  359.321673] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1283456512
[  359.352269] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1283456512
[  359.352694] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1283456512
[  359.386222] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1283456512
[  359.387307] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block
_size=512, alignment_offset=0, start=1493171712
[  359.420191] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size

Code: Select all

ansible@srv-hc1-110:~$ lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M

Code: Select all


2 questions ?

Q1: is alignment one serious issue or not ?

Q2: About "ERROR unknown event type 37", is it a warning or an error ?

Thanks for your help
- Jean Marc :) -

User avatar
odroid
Site Admin
Posts: 31297
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 44 times
Been thanked: 179 times
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by odroid » Wed Mar 06, 2019 10:13 am

I have no idea how much different Armbian Kernel configuration from our official Ubuntu Kernel 4.14.102.

Can you try Kernel 5.0 rc8?
viewtopic.php?f=95&t=33510

jeanmarc
Posts: 11
Joined: Tue Mar 05, 2019 9:02 pm
languages_spoken: english
ODROIDs: 2 Odroid HC1 boards with 250 GB SSD disk with standard kernel.org kernel Odroid N2 board
Location: near Paris
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by jeanmarc » Fri Mar 08, 2019 12:43 am

Please find one kernel generated with standard 5.0.0 kernel.org with Armbian u-boot. In fact, only the kernel is changed here with a Debian
kernel package tools .

There is no error (not yet !) as indicated in this topic, but there is 2 others issues on which we are working ....
- invalid alignment on EXT4 on LVM on SATA on USB
- and ....

[ 662.550720] Alignment trap: not handling instruction e8503f00 at [<b6ea6696>]
[ 662.556465] Unhandled fault: alignment exception (0x001) at 0x01eb110f
[ 662.562976] pgd = 5a289345

any idea ?

Code: Select all


U-Boot 2017.05-armbian (Jan 11 2019 - 10:29:28 +0100) for ODROID-XU4

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU4 based on EXYNOS5422
Board: Odroid XU4 based on EXYNOS5422
Type:  xu4
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
MMC Device 0 ( SD ): 14.8 GiB
Card did not respond to voltage select!
mmc_init: -95, time 11
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Press quickly 'Enter' twice to stop autoboot:  1  0 
** Unrecognized filesystem type **
** File not found /boot.ini **
12488 bytes read in 25 ms (487.3 KiB/s)
cfgload addr = 0x50000000, Loading boot.ini from ext4 0:1 /boot/boot.ini
cfgload: applying boot.ini...
cfgload: setenv initrd_high "0xffffffff"
cfgload: setenv fdt_high "0xffffffff"
cfgload: setenv macaddr "00:1e:06:61:7a:55"
cfgload: setenv rootdev "UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5"
cfgload: setenv rootfstype "ext4"
cfgload: setenv console "both"
cfgload: setenv verbosity "7"
cfgload: if ext4load mmc 0:1 0x44000000 /boot/armbianEnv.txt || fatload mmc 0:1 0x44000000 armbianEnv.txt || ext4load mmc 0:1 0x44000000 armbianEnv.txt; then env import -t 0x44000000 ${filesize}; fi
379 bytes read in 32 ms (10.7 KiB/s)
cfgload: if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
cfgload: if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttySAC2,115200n8 ${consoleargs}"; fi
cfgload: setenv bootrootfs "${consoleargs} consoleblank=0 loglevel=${verbosity} panic=10 root=${rootdev} rootfstype=${rootfstype} rootwait rw"
cfgload: setenv vout "hdmi"
cfgload: setenv cecenable "false" # false or true
cfgload: setenv governor "performance"
cfgload: setenv ddr_freq 825
cfgload: setenv HPD "true"
cfgload: setenv hdmi_tx_amp_lvl  "31"
cfgload: setenv hdmi_tx_lvl_ch0      "3"
cfgload: setenv hdmi_tx_lvl_ch1      "3"
cfgload: setenv hdmi_tx_lvl_ch2      "3"
cfgload: setenv hdmi_tx_emp_lvl      "6"
cfgload: setenv hdmi_clk_amp_lvl     "31"
cfgload: setenv hdmi_tx_res      "0"
cfgload: setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
cfgload: ext4load mmc 0:1 0x40008000 /boot/zImage || fatload mmc 0:1 0x40008000 zImage || ext4load mmc 0:1 0x40008000 zImage
6051064 bytes read in 473 ms (12.2 MiB/s)
cfgload: ext4load mmc 0:1 0x42000000 /boot/uInitrd || fatload mmc 0:1 0x42000000 uInitrd || ext4load mmc 0:1 0x42000000 uInitrd
3811409 bytes read in 315 ms (11.5 MiB/s)
cfgload: if test "${board_name}" = "xu4"; then setenv fdtfile "exynos5422-odroidxu4.dtb"; fi
cfgload: if test "${board_name}" = "xu3"; then setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
cfgload: if test "${board_name}" = "xu3l"; then setenv fdtfile "exynos5422-odroidxu3-lite.dtb"; fi
cfgload: if test "${board_name}" = "hc1"; then setenv fdtfile "exynos5422-odroidhc1.dtb"; fi
cfgload: if ext4load mmc 0:1 0x00000000 "/boot/.next" || fatload mmc 0:1 0x00000000 ".next"  || ext4load mmc 0:1 0x00000000 ".next"; then echo "Found mainline kernel configuration"; else setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
0 bytes read in 17 ms (0 Bytes/s)
Found mainline kernel configuration
cfgload: ext4load mmc 0:1 0x44000000 /boot/dtb/${fdtfile} || fatload mmc 0:1 0x44000000 dtb/${fdtfile} || ext4load mmc 0:1 0x44000000 dtb/${fdtfile}
54344 bytes read in 55 ms (964.8 KiB/s)
cfgload: fdt addr 0x44000000
cfgload: if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
cfgload: dmc ${ddr_freq}
cfgload: bootz 0x40008000 0x42000000 0x44000000
Kernel image @ 0x40008000 [ 0x000000 - 0x5c54f8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    3811345 Bytes = 3.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 44000000
   Booting using the fdt blob at 0x44000000
   Using Device Tree in place at 44000000, end 44010447

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 5.0.0 (jean-marc_lacroix@vm-stretch-armhf-110) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Wed Mar 6 12:55:18 CET 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid HC1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] Running under secure firmware.
[    0.000000] random: get_random_bytes called from start_kernel+0xa0/0x4a0 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s42636 r8192 d22900 u73728
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=ttySAC2,115200n8 console=tty1 consoleblank=0 loglevel=7 panic=10 root=UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5 rootfstype=ext4 rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  s5p_mfc.mem=16M
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1905572K/2074624K available (9216K kernel code, 759K rwdata, 2392K rodata, 1024K init, 318K bss, 37980K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 760 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 319 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000032] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001455] Console: colour dummy device 80x30
[    0.002144] printk: console [tty1] enabled
[    0.002200] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002241] pid_max: default: 32768 minimum: 301
[    0.002457] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002502] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003485] CPU: Testing write buffer coherency: ok
[    0.004078] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.028054] Setting up static identity map for 0x40100000 - 0x40100060
[    0.028405] ARM CCI driver probed
[    0.028654] Exynos MCPM support installed
[    0.035991] rcu: Hierarchical SRCU implementation.
[    0.051991] smp: Bringing up secondary CPUs ...
[    0.084368] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.116334] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.148333] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.180348] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.180357] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.212329] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.212337] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.244342] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.244350] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.276332] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.276341] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.276583] smp: Brought up 1 node, 8 CPUs
[    0.276634] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.276660] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[    0.276689] CPU: This may indicate a broken bootloader or firmware.
[    0.278124] devtmpfs: initialized
[    0.295909] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    0.296524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.296579] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.303552] pinctrl core: initialized pinctrl subsystem
[    0.306499] NET: Registered protocol family 16
[    0.309191] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.310716] audit: initializing netlink subsys (disabled)
[    0.311056] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
[    0.311949] cpuidle: using governor menu
[    0.312958] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.312995] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.358889] EXYNOS5420 PMU initialized
[    0.404345] random: fast init done
[    0.458478] SCSI subsystem initialized
[    0.458760] usbcore: registered new interface driver usbfs
[    0.458837] usbcore: registered new interface driver hub
[    0.459023] usbcore: registered new device driver usb
[    0.459790] media: Linux media interface: v0.10
[    0.459863] videodev: Linux video capture interface: v2.00
[    0.460649] Advanced Linux Sound Architecture Driver Initialized.
[    0.462211] clocksource: Switched to clocksource mct-frc
[    1.033311] VFS: Disk quotas dquot_6.6.0
[    1.033399] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.048384] NET: Registered protocol family 2
[    1.049165] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.049216] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.049311] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.049479] TCP: Hash tables configured (established 8192 bind 8192)
[    1.049597] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.049651] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.049927] NET: Registered protocol family 1
[    1.050802] RPC: Registered named UNIX socket transport module.
[    1.050826] RPC: Registered udp transport module.
[    1.050919] RPC: Registered tcp transport module.
[    1.050939] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.051174] Trying to unpack rootfs image as initramfs...
[    1.249344] Freeing initrd memory: 3724K
[    1.250822] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.251618] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.256092] Initialise system trusted keyrings
[    1.256337] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.265345] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.266176] NFS: Registering the id_resolver key type
[    1.266265] Key type id_resolver registered
[    1.266286] Key type id_legacy registered
[    1.266316] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.266371] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.338787] Key type asymmetric registered
[    1.338815] Asymmetric key parser 'x509' registered
[    1.338891] bounce: pool size: 64 pages
[    1.338968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.339238] io scheduler mq-deadline registered
[    1.339261] io scheduler kyber registered
[    1.341732] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.341842] samsung-usb2-phy 12130000.phy: Linked as a consumer to regulator.0
[    1.342829] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.342924] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[    1.342959] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.343323] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.343427] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[    1.343462] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.351377] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.351407] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.354035] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.354063] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.354994] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.355022] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.430495] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.432645] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    1.433066] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    1.433484] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    2.325909] printk: console [ttySAC2] enabled
[    2.330624] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    2.340597] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[    2.347592] iommu: Adding device 10850000.g2d to group 0
[    2.351490] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    2.358850] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    2.367642] iommu: Adding device 11c00000.rotator to group 1
[    2.371883] exynos-rotator 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.382123] [drm] Exynos DRM: using 10850000.g2d device for DMA mapping operations
[    2.388316] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[    2.396498] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0a6436c)
[    2.402999] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[    2.411400] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0a64bf8)
[    2.418237] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.424820] [drm] No driver support for vblank timestamp query.
[    2.431288] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[    2.450873] brd: module loaded
[    2.465529] loop: module loaded
[    2.467947] libphy: Fixed MDIO Bus: probed
[    2.471611] usbcore: registered new interface driver r8152
[    2.476813] usbcore: registered new interface driver cdc_ether
[    2.482605] usbcore: registered new interface driver cdc_subset
[    2.490328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.495439] ehci-exynos: EHCI EXYNOS driver
[    2.499903] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.505062] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.512915] exynos-ehci 12110000.usb: irq 84, io mem 0x12110000
[    2.534264] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.539121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.547076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.554260] usb usb1: Product: EHCI Host Controller
[    2.559111] usb usb1: Manufacturer: Linux 5.0.0 ehci_hcd
[    2.564395] usb usb1: SerialNumber: 12110000.usb
[    2.569580] hub 1-0:1.0: USB hub found
[    2.572758] hub 1-0:1.0: 3 ports detected
[    2.577583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.582868] ohci-exynos: OHCI EXYNOS driver
[    2.587184] exynos-ohci 12120000.usb: USB Host Controller
[    2.592410] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.600126] exynos-ohci 12120000.usb: irq 84, io mem 0x12120000
[    2.666504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.673338] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.681601] usb usb2: Product: USB Host Controller
[    2.685292] usb usb2: Manufacturer: Linux 5.0.0 ohci_hcd
[    2.690577] usb usb2: SerialNumber: 12120000.usb
[    2.695715] hub 2-0:1.0: USB hub found
[    2.698942] hub 2-0:1.0: 3 ports detected
[    2.704315] usbcore: registered new interface driver usb-storage
[    2.709536] mousedev: PS/2 mouse device common for all mice
[    2.715673] i2c /dev entries driver
[    2.734227] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.747940] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[    2.764533] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    2.832088] s5m-rtc s2mps14-rtc: registered as rtc0
[    2.836133] s2mps11-clk s2mps11-clk: DMA mask not set
[    2.842616] IR NEC protocol handler initialized
[    2.845675] IR RC5(x/sz) protocol handler initialized
[    2.850736] IR RC6 protocol handler initialized
[    2.855238] IR JVC protocol handler initialized
[    2.859744] IR Sony protocol handler initialized
[    2.864336] IR SANYO protocol handler initialized
[    2.869015] IR Sharp protocol handler initialized
[    2.873694] IR MCE Keyboard/mouse protocol handler initialized
[    2.879502] IR XMP protocol handler initialized
[    2.884660] iommu: Adding device 11f50000.jpeg to group 2
[    2.889399] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    2.896712] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
[    2.903529] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
[    2.910355] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    2.916044] iommu: Adding device 11f60000.jpeg to group 3
[    2.921202] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    2.928489] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
[    2.935331] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3
[    2.942160] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    2.948287] iommu: Adding device 11000000.codec to group 4
[    2.953545] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    2.960027] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    2.984817] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    2.992516] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.001141] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.011688] s5p-mfc 11000000.codec: decoder registered as /dev/video4
[    3.018085] s5p-mfc 11000000.codec: encoder registered as /dev/video5
[    3.025495] iommu: Adding device 13e00000.video-scaler to group 5
[    3.030852] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.038991] iommu: Adding device 13e10000.video-scaler to group 6
[    3.044741] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.055986] exynos-tmu 10060000.tmu: Linked as a consumer to regulator.7
[    3.061487] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.068676] exynos-tmu 10064000.tmu: Linked as a consumer to regulator.7
[    3.074785] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.081999] exynos-tmu 10068000.tmu: Linked as a consumer to regulator.7
[    3.088151] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.095342] exynos-tmu 1006c000.tmu: Linked as a consumer to regulator.7
[    3.101493] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.108683] exynos-tmu 100a0000.tmu: Linked as a consumer to regulator.7
[    3.114841] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.122257] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    3.130324] device-mapper: uevent: version 1.0.3
[    3.134476] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.143517] cpu cpu0: Linked as a consumer to regulator.44
[    3.148074] cpu cpu0: Dropping the link to regulator.44
[    3.153886] cpu cpu0: Linked as a consumer to regulator.44
[    3.165323] cpu cpu4: Linked as a consumer to regulator.40
[    3.176888] sdhci: Secure Digital Host Controller Interface driver
[    3.181616] sdhci: Copyright(c) Pierre Ossman
[    3.186109] Synopsys Designware Multimedia Card Interface Driver
[    3.192468] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.198869] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.205190] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.210583] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[    3.219894] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.19
[    3.226817] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.13
[    3.249193] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.283406] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.287944] hidraw: raw HID events driver (C) Jiri Kosina
[    3.293369] usbcore: registered new interface driver usbhid
[    3.298619] usbhid: USB HID core driver
[    3.303587] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[    3.309813] exynos-bus soc:bus_wcore: Dropping the link to regulator.41
[    3.322871] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.328171] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.334753] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.341333] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.350522] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.351295] drop_monitor: Initializing network drop monitor service
[    3.363215] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[    3.365474] NET: Registered protocol family 17
[    3.373086] mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
[    3.376352] NET: Registered protocol family 15
[    3.385189] Key type dns_resolver registered
[    3.386161]  mmcblk0: p1
[    3.389989] Registering SWP/SWPB emulation handler
[    3.397156] registered taskstats version 1
[    3.400749] Loading compiled-in X.509 certificates
[    3.411487] Key type encrypted registered
[    3.441921] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[    3.447590] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[    3.454089] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[    3.459846] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.464776] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[    3.472577] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.481768] xhci-hcd xhci-hcd.0.auto: irq 146, io mem 0x12000000
[    3.488020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.495956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.503140] usb usb3: Product: xHCI Host Controller
[    3.507994] usb usb3: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.513276] usb usb3: SerialNumber: xhci-hcd.0.auto
[    3.518533] hub 3-0:1.0: USB hub found
[    3.521856] hub 3-0:1.0: 1 port detected
[    3.526008] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.531224] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    3.538846] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    3.545480] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.553608] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.561720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.568909] usb usb4: Product: xHCI Host Controller
[    3.573765] usb usb4: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.579050] usb usb4: SerialNumber: xhci-hcd.0.auto
[    3.584229] hub 4-0:1.0: USB hub found
[    3.587663] hub 4-0:1.0: 1 port detected
[    3.592497] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[    3.598623] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[    3.605065] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[    3.610654] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.615800] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
[    3.623606] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.632808] xhci-hcd xhci-hcd.1.auto: irq 147, io mem 0x12400000
[    3.639040] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.646994] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.654181] usb usb5: Product: xHCI Host Controller
[    3.659032] usb usb5: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.664318] usb usb5: SerialNumber: xhci-hcd.1.auto
[    3.669497] hub 5-0:1.0: USB hub found
[    3.672917] hub 5-0:1.0: 1 port detected
[    3.677012] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.682262] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6
[    3.689883] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    3.696518] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.704640] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.712761] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.719951] usb usb6: Product: xHCI Host Controller
[    3.724803] usb usb6: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.730088] usb usb6: SerialNumber: xhci-hcd.1.auto
[    3.735295] hub 6-0:1.0: USB hub found
[    3.738686] hub 6-0:1.0: 1 port detected
[    3.743533] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.748180] rtc rtc1: invalid alarm value: 1900-01-01T00:00:00
[    3.754042] s3c-rtc 101e0000.rtc: registered as rtc1
[    3.760135] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[    3.765885] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    3.774468] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    3.782404] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[    3.790756] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[    3.799062] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    3.807411] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    3.815408] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    3.823320] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    3.831676] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    3.839679] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    3.848082] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    3.856229] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    3.864613] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    3.873336] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    3.881575] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    3.890453] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    3.900592] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:09 UTC (946684809)
[    3.936307] vddq_mmc0: disabling
[    3.939320] vdd_adc: disabling
[    3.942355] vdd_ldo12: disabling
[    3.954467] ALSA device list:
[    3.955954]   No soundcards found.
[    3.959925] Freeing unused kernel memory: 1024K
[    3.974445] Run /init as init process
[    4.008110] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.014452] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.014496] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.790360] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.815903] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.01
[    4.822646] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.829921] usb 4-1: Product: USB to SATA bridge
[    4.834351] usb 4-1: Manufacturer: JMicron
[    4.838410] usb 4-1: SerialNumber: DB00000000013B
[    4.886347] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.911430] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    4.918187] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.925279] usb 6-1: Product: USB 10/100/1000 LAN
[    4.929956] usb 6-1: Manufacturer: Realtek
[    4.934034] usb 6-1: SerialNumber: 000001000000
[    5.136722] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    5.219408] r8152 6-1:1.0 eth0: v1.09.9
[    5.412232] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    5.604146] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    5.609360] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    5.634436] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[    6.705049] scsi host0: uas
[    6.707368] scsi 0:0:0:0: Direct-Access     JMicron                   3101 PQ: 0 ANSI: 6
[    6.721259] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    6.721265] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    6.727451] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.734413] sd 0:0:0:0: [sda] Write Protect is off
[    6.738618] usbcore: registered new interface driver uas
[    6.749570] sd 0:0:0:0: [sda] Disabling FUA
[    6.749581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.782474]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 >
[    6.816221] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.450321] random: crng init done
[    7.452268] random: 7 urandom warning(s) missed due to ratelimiting
[    8.581248] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    8.596589] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    8.613693] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    8.630054] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    8.651223] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    8.666578] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    8.683432] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    8.700006] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    8.720137] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    8.735500] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    8.752393] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    8.768909] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    8.788312] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    8.788321] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    8.788666] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    8.837376] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    8.854685] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    8.854692] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    8.854849] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    8.854859] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    8.863709] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    8.938272] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    8.938644] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    8.971865] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    8.974657] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.005459] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.005694] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.039080] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.041669] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.072707] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.072930] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.106330] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.109134] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    9.139945] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    9.140156] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    9.173566] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.236390] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.236397] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.268407] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.268414] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.302690] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.302696] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.335248] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.351961] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.354136] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.385583] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.385798] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.419201] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.421191] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.452912] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.453123] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.486705] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.488709] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.520504] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.520713] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.554301] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.556384] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.588092] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.588302] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.621886] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.624060] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.655694] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.655971] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.689476] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.691602] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.723272] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.723482] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.757086] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.759255] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.790880] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.807861] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.824661] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  187.963392] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  187.978772] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  187.979252] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.012182] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.030787] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.046292] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.046507] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.079849] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.127806] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.143280] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.143661] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.176887] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.194168] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.194175] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.194424] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.244365] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.261623] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.261630] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.261737] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.311937] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.314325] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.345729] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.345952] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.379531] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.410788] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.426348] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.426685] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.460090] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.479833] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.495423] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.495572] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.495578] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.498373] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.562913] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.563167] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.596702] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.599025] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.630336] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.630528] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.663776] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.024344] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.024353] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.056746] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.073132] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.079238] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.106559] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.106795] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.139998] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.142041] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.173537] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.173749] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.207160] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.209223] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.240780] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.240989] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.274405] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.276516] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.308025] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.308243] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.341644] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.343874] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.375266] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.375477] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.408886] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.411023] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.442511] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.442679] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.476134] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.478294] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.509840] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.510046] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.543633] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.545683] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.577433] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.577633] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.611227] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.944499] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.944508] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.976708] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.976716] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.987135] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.026806] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.027052] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.060424] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.062608] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.094046] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.094400] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.127676] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.129645] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.161376] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.161597] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.195170] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.197224] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.228989] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.245989] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.262768] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.264913] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.296555] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.296772] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.330348] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.332388] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.364146] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.364354] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.397939] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.400067] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.431736] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.431947] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.465529] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.467681] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.499325] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.499512] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.533147] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.551215] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.551229] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.583958] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.583966] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.959970] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  190.975316] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  190.975525] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.008740] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.009969] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.042269] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.059018] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.059028] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.102603] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.118023] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.118419] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.151633] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.153920] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.185255] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.185479] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.218881] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.220905] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.252499] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.252716] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.286120] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.288277] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.319741] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.319958] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.353365] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.355526] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.386988] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.387203] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.420604] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.422825] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.454323] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.454542] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.488108] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.490279] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.521903] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.522112] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.555698] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.894981] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.910302] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.910949] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.943494] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.945687] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.976851] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.977086] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.010306] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.012275] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.043753] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.044044] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.077192] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.079387] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.110742] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.111028] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.144353] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.146474] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.177976] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.178277] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.211600] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.213617] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.245214] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.245419] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.278835] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.280880] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.312459] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.312662] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.346079] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.348280] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.379702] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.379910] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.413322] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.414402] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.446944] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.447038] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.480565] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.860513] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.860523] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.892669] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.909023] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.918760] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.942387] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.942620] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.975821] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.977783] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.009357] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.009562] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.042982] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.044925] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.076601] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.076805] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.110237] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.112347] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.143847] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.144053] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.177469] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.179604] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.211087] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.211298] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.244709] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.246996] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.278334] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.278526] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.311951] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.314064] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.345492] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.345696] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.378938] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.381235] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.412385] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.412392] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.412399] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.462642] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.462648] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.462862] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.512909] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.512916] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.512921] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.563166] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.563172] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.565258] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.613595] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.613771] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.647390] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.649400] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  193.681189] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  193.681394] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  193.714984] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  194.086618] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.086627] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.086860] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.135175] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.136454] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.168528] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.168640] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.201976] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.203117] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.235424] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.235521] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.268872] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.269873] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.302414] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.302512] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.336030] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.337013] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.369653] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.369751] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.403285] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.404306] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.436895] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.436988] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.470529] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.471535] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.504139] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.504235] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.537760] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.538867] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.571383] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.571480] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.605004] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.606008] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  194.638633] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  194.638751] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  194.672247] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.007493] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.007505] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.039658] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.056033] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.057249] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.089385] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.089493] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.122831] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.123795] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.156284] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.156494] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.189733] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.191968] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.223270] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.223495] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.256888] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.259045] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.290510] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.290715] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.324130] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.326370] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.357666] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.357870] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.391114] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.393146] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.424656] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.424879] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.458278] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.460402] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.491894] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.492110] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.525514] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.527695] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.559137] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.559347] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.592758] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.922179] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.937423] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.937788] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.970686] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.979221] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.004050] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.004329] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.037499] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.040237] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.070948] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.071229] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.104392] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.106940] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.137938] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.138404] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.171571] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.190178] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.205589] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.205864] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.239205] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.241306] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.272822] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.273049] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.306441] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.308438] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.340151] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.340367] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.373949] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.376101] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.407742] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.407941] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.441536] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.443719] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.475336] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.475531] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.509126] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.880483] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.895943] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.896561] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.929526] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.952711] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.952721] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.952899] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.002088] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.003544] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.035857] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.035990] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.069646] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.071892] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.103543] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.103764] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.137492] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.139591] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.171465] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.171666] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.205432] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.207578] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.239400] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.239606] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.273365] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.275511] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.307339] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.307545] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.341300] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.342412] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.375272] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.375369] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.409235] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.410312] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.443205] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.443303] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.477173] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.851770] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.867321] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.867535] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.900806] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.902000] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.934518] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.934638] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.968302] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.969303] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.002105] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.002300] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.035894] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.036860] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.069777] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.069871] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.103744] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.104721] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.137712] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.137809] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.171680] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.172732] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.205651] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.205747] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.239628] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.240694] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.273585] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.273683] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.307566] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.308618] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.341523] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.341622] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.375500] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.376514] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.409459] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.409555] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.443439] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  199.169413] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[  200.688854] 8021q: 802.1Q VLAN Support v1.8
[  200.816507] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  201.714445] r8152 6-1:1.0 eth0: carrier on
[  201.853837] NET: Registered protocol family 10
[  201.858927] Segment Routing with IPv6
[  201.869748] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  201.894298] br-service: port 1(eth0.6) entered blocking state
[  201.898711] br-service: port 1(eth0.6) entered disabled state
[  201.904814] device eth0.6 entered promiscuous mode
[  201.909118] device eth0 entered promiscuous mode
[  201.914004] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  201.919398] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  201.924625] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  201.936425] br-service: port 1(eth0.6) entered blocking state
[  201.940735] br-service: port 1(eth0.6) entered forwarding state
[  202.101970] br-service: port 2(br-eth-service) entered blocking state
[  202.106983] br-service: port 2(br-eth-service) entered disabled state
[  202.113915] device br-eth-service entered promiscuous mode
[  202.127216] br-service: port 2(br-eth-service) entered blocking state
[  202.132224] br-service: port 2(br-eth-service) entered forwarding state
[  202.288748] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-service: link becomes ready
[  202.524043] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.537775] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.542069] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.588797] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.641055] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.641432] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.652164] br-ntp: port 1(eth0.7) entered blocking state
[  202.656107] br-ntp: port 1(eth0.7) entered disabled state
[  202.661630] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.666508] device eth0.7 entered promiscuous mode
[  202.671816] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.679283] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.691468] br-ntp: port 1(eth0.7) entered blocking state
[  202.695427] br-ntp: port 1(eth0.7) entered forwarding state
[  202.815731] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.835152] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.841294] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.899091] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.001109] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.006553] br-admin: port 1(eth0.9) entered blocking state
[  203.010686] br-admin: port 1(eth0.9) entered disabled state
[  203.016602] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.018574] device eth0.9 entered promiscuous mode
[  203.027073] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.036580] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.049029] br-admin: port 1(eth0.9) entered blocking state
[  203.053159] br-admin: port 1(eth0.9) entered forwarding state
[  203.212241] br-admin: port 2(br-eth-admin) entered blocking state
[  203.216908] br-admin: port 2(br-eth-admin) entered disabled state
[  203.223342] device br-eth-admin entered promiscuous mode
[  203.237755] br-admin: port 2(br-eth-admin) entered blocking state
[  203.242446] br-admin: port 2(br-eth-admin) entered forwarding state
[  203.383212] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-admin: link becomes ready
[  203.628061] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.643145] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.647410] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.688778] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.718321] IPv6: ADDRCONF(NETDEV_CHANGE): br-ntp: link becomes ready
[  203.787015] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.791293] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.797034] br-user: port 1(eth0.8) entered blocking state
[  203.801633] br-user: port 1(eth0.8) entered disabled state
[  203.801809] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.807415] device eth0.8 entered promiscuous mode
[  203.817386] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.824443] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.836297] br-user: port 1(eth0.8) entered blocking state
[  203.840330] br-user: port 1(eth0.8) entered forwarding state
[  203.987913] br-user: port 2(br-eth-user) entered blocking state
[  203.992446] br-user: port 2(br-eth-user) entered disabled state
[  203.992890] device br-eth-user entered promiscuous mode
[  204.012690] br-user: port 2(br-eth-user) entered blocking state
[  204.017183] br-user: port 2(br-eth-user) entered forwarding state
[  204.182950] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-user: link becomes ready
[  204.446165] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.460699] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.464943] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.508707] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.609048] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.613300] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.620147] br-wifi: port 1(eth0.11) entered blocking state
[  204.624409] br-wifi: port 1(eth0.11) entered disabled state
[  204.629940] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.635413] device eth0.11 entered promiscuous mode
[  204.640211] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.647790] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.659425] br-wifi: port 1(eth0.11) entered blocking state
[  204.663544] br-wifi: port 1(eth0.11) entered forwarding state
[  204.785780] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.807872] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.812209] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.865303] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.999729] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.003946] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.013188] br-alarm: port 1(eth0.4) entered blocking state
[  205.017322] br-alarm: port 1(eth0.4) entered disabled state
[  205.023262] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.024280] device eth0.4 entered promiscuous mode
[  205.033200] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.039421] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.054545] br-alarm: port 1(eth0.4) entered blocking state
[  205.058668] br-alarm: port 1(eth0.4) entered forwarding state
[  205.177949] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.196905] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.201200] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.264057] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.394280] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.398531] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.404899] br-vpn: port 1(eth0.13) entered blocking state
[  205.408969] br-vpn: port 1(eth0.13) entered disabled state
[  205.414556] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.420093] device eth0.13 entered promiscuous mode
[  205.424891] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.432517] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.445531] br-vpn: port 1(eth0.13) entered blocking state
[  205.449569] br-vpn: port 1(eth0.13) entered forwarding state
[  205.568067] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.587802] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.592260] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.655427] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.784422] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.789852] br-trusted: port 1(eth0.12) entered blocking state
[  205.794309] br-trusted: port 1(eth0.12) entered disabled state
[  205.800162] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.801686] device eth0.12 entered promiscuous mode
[  205.810575] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.817860] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.829213] br-trusted: port 1(eth0.12) entered blocking state
[  205.833604] br-trusted: port 1(eth0.12) entered forwarding state
[  205.962666] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.977953] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.982305] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.036846] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.167434] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.173474] br-fonera: port 1(eth0.3) entered blocking state
[  206.177705] br-fonera: port 1(eth0.3) entered disabled state
[  206.183462] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.186651] device eth0.3 entered promiscuous mode
[  206.193830] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.203199] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.216126] br-fonera: port 1(eth0.3) entered blocking state
[  206.220338] br-fonera: port 1(eth0.3) entered forwarding state
[  206.351548] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.372573] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.376905] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.439099] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.548792] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.553071] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.560599] br-factory: port 1(eth0.15) entered blocking state
[  206.565202] br-factory: port 1(eth0.15) entered disabled state
[  206.570926] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.573387] device eth0.15 entered promiscuous mode
[  206.581426] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.589407] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.601750] br-factory: port 1(eth0.15) entered blocking state
[  206.606139] br-factory: port 1(eth0.15) entered forwarding state
[  206.736993] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.756083] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.760446] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.822428] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.931905] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.936198] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.943396] br-wan: port 1(eth0.5) entered blocking state
[  206.947415] br-wan: port 1(eth0.5) entered disabled state
[  206.952904] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.953951] device eth0.5 entered promiscuous mode
[  206.963400] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.971092] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.984333] br-wan: port 1(eth0.5) entered blocking state
[  206.988290] br-wan: port 1(eth0.5) entered forwarding state
[  207.150173] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.155211] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.172286] br-test-1: port 1(eth0.1) entered blocking state
[  207.176518] br-test-1: port 1(eth0.1) entered disabled state
[  207.177120] device eth0.1 entered promiscuous mode
[  207.192518] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.196832] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.211404] br-test-1: port 1(eth0.1) entered blocking state
[  207.215625] br-test-1: port 1(eth0.1) entered forwarding state
[  207.404342] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.419533] br-test-2: port 1(eth0.2) entered blocking state
[  207.423865] br-test-2: port 1(eth0.2) entered disabled state
[  207.430363] device eth0.2 entered promiscuous mode
[  207.438997] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.443392] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.456908] br-test-2: port 1(eth0.2) entered blocking state
[  207.461126] br-test-2: port 1(eth0.2) entered forwarding state
[  207.665598] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.687159] br-test-3: port 1(eth0.10) entered blocking state
[  207.691644] br-test-3: port 1(eth0.10) entered disabled state
[  207.697465] device eth0.10 entered promiscuous mode
[  207.707272] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.711661] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.729612] br-test-3: port 1(eth0.10) entered blocking state
[  207.733938] br-test-3: port 1(eth0.10) entered forwarding state
[  209.477603] br-admin: port 3(e-dns-adm) entered blocking state
[  209.482024] br-admin: port 3(e-dns-adm) entered disabled state
[  209.482605] device e-dns-adm entered promiscuous mode
[  209.502462] br-alarm: port 2(e-dns-alar) entered blocking state
[  209.507071] br-alarm: port 2(e-dns-alar) entered disabled state
[  209.513090] device e-dns-alar entered promiscuous mode
[  209.513747] br-alarm: port 2(e-dns-alar) entered blocking state
[  209.523838] br-alarm: port 2(e-dns-alar) entered forwarding state
[  209.532795] br-user: port 3(e-dns-usr) entered blocking state
[  209.537161] br-user: port 3(e-dns-usr) entered disabled state
[  209.543180] device e-dns-usr entered promiscuous mode
[  209.548427] br-user: port 3(e-dns-usr) entered blocking state
[  209.553594] br-user: port 3(e-dns-usr) entered forwarding state
[  209.559625] br-ntp: port 2(e-dns-ntp) entered blocking state
[  209.559630] br-ntp: port 2(e-dns-ntp) entered disabled state
[  209.559796] device e-dns-ntp entered promiscuous mode
[  209.576419] br-ntp: port 2(e-dns-ntp) entered blocking state
[  209.581402] br-ntp: port 2(e-dns-ntp) entered forwarding state
[  209.598128] br-vpn: port 2(e-dns-vpn) entered blocking state
[  209.598136] br-vpn: port 2(e-dns-vpn) entered disabled state
[  209.609207] device e-dns-vpn entered promiscuous mode
[  209.609932] br-vpn: port 2(e-dns-vpn) entered blocking state
[  209.609939] br-vpn: port 2(e-dns-vpn) entered forwarding state
[  209.622706] br-wifi: port 2(e-dns-wifi) entered blocking state
[  209.630890] br-wifi: port 2(e-dns-wifi) entered disabled state
[  209.631279] device e-dns-wifi entered promiscuous mode
[  209.642632] br-wifi: port 2(e-dns-wifi) entered blocking state
[  209.647576] br-wifi: port 2(e-dns-wifi) entered forwarding state
[  209.658695] br-service: port 3(e-dns-srv) entered blocking state
[  209.663364] br-service: port 3(e-dns-srv) entered disabled state
[  209.663802] device e-dns-srv entered promiscuous mode
[  209.674932] br-service: port 3(e-dns-srv) entered blocking state
[  209.680276] br-service: port 3(e-dns-srv) entered forwarding state
[  209.693447] br-trusted: port 2(e-dns-trus) entered blocking state
[  209.698126] br-trusted: port 2(e-dns-trus) entered disabled state
[  209.698627] device e-dns-trus entered promiscuous mode
[  209.711368] br-trusted: port 2(e-dns-trus) entered blocking state
[  209.716043] br-trusted: port 2(e-dns-trus) entered forwarding state
[  209.728793] br-fonera: port 2(e-dns-fone) entered blocking state
[  209.737159] br-fonera: port 2(e-dns-fone) entered disabled state
[  209.742129] device e-dns-fone entered promiscuous mode
[  209.755327] br-fonera: port 2(e-dns-fone) entered blocking state
[  209.759940] br-fonera: port 2(e-dns-fone) entered forwarding state
[  209.782145] br-factory: port 2(e-dns-fact) entered blocking state
[  209.788468] br-factory: port 2(e-dns-fact) entered disabled state
[  209.793512] device e-dns-fact entered promiscuous mode
[  209.794735] br-factory: port 2(e-dns-fact) entered blocking state
[  209.804323] br-factory: port 2(e-dns-fact) entered forwarding state
[  209.834795] br-test-1: port 2(e-dns-tst1) entered blocking state
[  209.834807] br-test-1: port 2(e-dns-tst1) entered disabled state
[  209.857582] device e-dns-tst1 entered promiscuous mode
[  209.862744] br-test-1: port 2(e-dns-tst1) entered blocking state
[  209.867322] br-test-1: port 2(e-dns-tst1) entered forwarding state
[  209.886114] br-test-2: port 2(e-dns-tst2) entered blocking state
[  209.892617] br-test-2: port 2(e-dns-tst2) entered disabled state
[  209.898547] device e-dns-tst2 entered promiscuous mode
[  209.908014] br-test-2: port 2(e-dns-tst2) entered blocking state
[  209.912580] br-test-2: port 2(e-dns-tst2) entered forwarding state
[  209.971200] br-test-3: port 2(e-dns-tst3) entered blocking state
[  209.988006] br-test-3: port 2(e-dns-tst3) entered disabled state
[  209.993888] device e-dns-tst3 entered promiscuous mode
[  209.999054] br-test-3: port 2(e-dns-tst3) entered blocking state
[  210.003680] br-test-3: port 2(e-dns-tst3) entered forwarding state
[  210.013888] cgroup: lxc-autostart (10319) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  210.031537] cgroup: "memory" requires setting use_hierarchy to 1 on the root
[  210.524109] br-alarm: port 2(e-dns-alar) entered disabled state
[  210.528953] br-user: port 3(e-dns-usr) entered disabled state
[  210.535403] br-ntp: port 2(e-dns-ntp) entered disabled state
[  210.541749] br-vpn: port 2(e-dns-vpn) entered disabled state
[  210.553467] br-wifi: port 2(e-dns-wifi) entered disabled state
[  210.560913] br-service: port 3(e-dns-srv) entered disabled state
[  210.568648] br-trusted: port 2(e-dns-trus) entered disabled state
[  210.574786] br-fonera: port 2(e-dns-fone) entered disabled state
[  210.580872] br-factory: port 2(e-dns-fact) entered disabled state
[  210.587553] br-test-1: port 2(e-dns-tst1) entered disabled state
[  210.595095] br-test-2: port 2(e-dns-tst2) entered disabled state
[  210.612353] br-test-3: port 2(e-dns-tst3) entered disabled state
[  210.875587] EXT4-fs (dm-76): couldn't mount as ext3 due to feature incompatibilities
[  210.894873] EXT4-fs (dm-76): mounted filesystem with ordered data mode. Opts: (null)
[  210.903126] eth-admin: renamed from vethDK35NA
[  210.953060] eth-alarm: renamed from vethPSIYV9
[  210.988496] eth-user: renamed from veth55LW5G
[  211.044115] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  211.050039] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-adm: link becomes ready
[  211.057265] br-admin: port 3(e-dns-adm) entered blocking state
[  211.061943] br-admin: port 3(e-dns-adm) entered forwarding state
[  211.069871] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  211.076488] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-alar: link becomes ready
[  211.082944] br-alarm: port 2(e-dns-alar) entered blocking state
[  211.087868] br-alarm: port 2(e-dns-alar) entered forwarding state
[  211.095826] eth-ntp: renamed from veth8G1B6W
[  211.140418] eth-vpn: renamed from vethFJ3AG6
[  211.191327] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  211.197181] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-usr: link becomes ready
[  211.204027] br-user: port 3(e-dns-usr) entered blocking state
[  211.208980] br-user: port 3(e-dns-usr) entered forwarding state
[  211.217418] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  211.223057] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-ntp: link becomes ready
[  211.229546] br-ntp: port 2(e-dns-ntp) entered blocking state
[  211.234863] br-ntp: port 2(e-dns-ntp) entered forwarding state
[  211.242382] eth-wifi: renamed from vethI4LAJU
[  211.296444] eth-srv: renamed from veth02TK1P
[  211.335821] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  211.341512] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-vpn: link becomes ready
[  211.350774] br-vpn: port 2(e-dns-vpn) entered blocking state
[  211.355071] br-vpn: port 2(e-dns-vpn) entered forwarding state
[  211.362022] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  211.368048] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-wifi: link becomes ready
[  211.378459] br-wifi: port 2(e-dns-wifi) entered blocking state
[  211.382894] br-wifi: port 2(e-dns-wifi) entered forwarding state
[  211.390923] eth-trust: renamed from vethQGH0PS
[  211.448342] eth-foner: renamed from veth7EK8IE
[  211.551376] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  211.557168] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-srv: link becomes ready
[  211.565108] br-service: port 3(e-dns-srv) entered blocking state
[  211.569761] br-service: port 3(e-dns-srv) entered forwarding state
[  211.576408] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  211.583109] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-trus: link becomes ready
[  211.589668] br-trusted: port 2(e-dns-trus) entered blocking state
[  211.595397] br-trusted: port 2(e-dns-trus) entered forwarding state
[  211.603422] eth-fact: renamed from vethAWOWLH
[  211.648434] eth-tst1: renamed from vethX46QM2
[  211.705402] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  211.712474] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-fone: link becomes ready
[  211.719413] br-fonera: port 2(e-dns-fone) entered blocking state
[  211.724068] br-fonera: port 2(e-dns-fone) entered forwarding state
[  211.730676] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  211.739036] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-fact: link becomes ready
[  211.745537] br-factory: port 2(e-dns-fact) entered blocking state
[  211.750529] br-factory: port 2(e-dns-fact) entered forwarding state
[  211.752720] eth-tst2: renamed from vethI2NRUE
[  211.805449] eth-tst3: renamed from vethC4J07V
[  211.855312] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  211.861085] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst1: link becomes ready
[  211.869560] br-test-1: port 2(e-dns-tst1) entered blocking state
[  211.874264] br-test-1: port 2(e-dns-tst1) entered forwarding state
[  211.874489] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  211.887526] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst2: link becomes ready
[  211.900534] br-test-2: port 2(e-dns-tst2) entered blocking state
[  211.905195] br-test-2: port 2(e-dns-tst2) entered forwarding state
[  211.907598] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  211.928863] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst3: link becomes ready
[  211.935261] br-test-3: port 2(e-dns-tst3) entered blocking state
[  211.935275] br-test-3: port 2(e-dns-tst3) entered forwarding state
[  211.941743] EXT4-fs (dm-77): mounted filesystem with ordered data mode. Opts: (null)
[  211.970419] EXT4-fs (dm-78): mounted filesystem with ordered data mode. Opts: (null)
[  211.992344] EXT4-fs (dm-79): mounted filesystem with ordered data mode. Opts: (null)
[  212.014183] EXT4-fs (dm-80): mounted filesystem with ordered data mode. Opts: (null)
[  212.038029] EXT4-fs (dm-81): mounted filesystem with ordered data mode. Opts: (null)
[  212.063972] EXT4-fs (dm-82): mounted filesystem with ordered data mode. Opts: (null)
[  212.092886] EXT4-fs (dm-83): mounted filesystem with ordered data mode. Opts: (null)
[  212.114179] EXT4-fs (dm-84): mounted filesystem with ordered data mode. Opts: (null)
[  212.294584] br-admin: port 4(e-dhcp-adm) entered blocking state
[  212.300163] br-admin: port 4(e-dhcp-adm) entered disabled state
[  212.306752] device e-dhcp-adm entered promiscuous mode
[  212.307332] br-admin: port 4(e-dhcp-adm) entered blocking state
[  212.307339] br-admin: port 4(e-dhcp-adm) entered forwarding state
[  212.320780] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  212.320790] br-alarm: port 3(e-dhcp-alar) entered disabled state
[  212.321096] device e-dhcp-alar entered promiscuous mode
[  212.336499] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  212.336507] br-alarm: port 3(e-dhcp-alar) entered forwarding state
[  212.350412] br-user: port 4(e-dhcp-usr) entered blocking state
[  212.350419] br-user: port 4(e-dhcp-usr) entered disabled state
[  212.350776] device e-dhcp-usr entered promiscuous mode
[  212.352714] br-user: port 4(e-dhcp-usr) entered blocking state
[  212.352723] br-user: port 4(e-dhcp-usr) entered forwarding state
[  212.366683] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  212.421567] br-ntp: port 3(e-dhcp-ntp) entered disabled state
[  212.428173] device e-dhcp-ntp entered promiscuous mode
[  212.433424] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  212.438052] br-ntp: port 3(e-dhcp-ntp) entered forwarding state
[  212.450975] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  212.455311] br-vpn: port 3(e-dhcp-vpn) entered disabled state
[  212.455621] device e-dhcp-vpn entered promiscuous mode
[  212.456156] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  212.456164] br-vpn: port 3(e-dhcp-vpn) entered forwarding state
[  212.470808] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  212.489544] br-wifi: port 3(e-dhcp-wifi) entered disabled state
[  212.490011] device e-dhcp-wifi entered promiscuous mode
[  212.502103] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  212.506621] br-wifi: port 3(e-dhcp-wifi) entered forwarding state
[  212.519429] br-service: port 4(e-dhcp-srv) entered blocking state
[  212.536024] br-service: port 4(e-dhcp-srv) entered disabled state
[  212.543908] device e-dhcp-srv entered promiscuous mode
[  212.549208] br-service: port 4(e-dhcp-srv) entered blocking state
[  212.549215] br-service: port 4(e-dhcp-srv) entered forwarding state
[  212.559962] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  212.566454] br-trusted: port 3(e-dhcp-trus) entered disabled state
[  212.567077] device e-dhcp-trus entered promiscuous mode
[  212.595707] br-admin: port 4(e-dhcp-adm) entered disabled state
[  212.600681] br-alarm: port 3(e-dhcp-alar) entered disabled state
[  212.607327] br-user: port 4(e-dhcp-usr) entered disabled state
[  212.687852] br-ntp: port 3(e-dhcp-ntp) entered disabled state
[  212.706419] br-vpn: port 3(e-dhcp-vpn) entered disabled state
[  212.762416] br-wifi: port 3(e-dhcp-wifi) entered disabled state
[  212.773351] br-service: port 4(e-dhcp-srv) entered disabled state
[  212.837823] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  212.843108] br-fonera: port 3(e-dhcp-fone) entered disabled state
[  212.855497] device e-dhcp-fone entered promiscuous mode
[  212.861519] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  212.866275] br-fonera: port 3(e-dhcp-fone) entered forwarding state
[  212.892021] br-factory: port 3(e-dhcp-fact) entered blocking state
[  212.896785] br-factory: port 3(e-dhcp-fact) entered disabled state
[  212.897537] device e-dhcp-fact entered promiscuous mode
[  212.910984] br-factory: port 3(e-dhcp-fact) entered blocking state
[  212.915744] br-factory: port 3(e-dhcp-fact) entered forwarding state
[  212.943825] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  212.950832] br-test-1: port 3(e-dhcp-tst1) entered disabled state
[  212.957066] device e-dhcp-tst1 entered promiscuous mode
[  212.963724] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  212.968403] br-test-1: port 3(e-dhcp-tst1) entered forwarding state
[  212.995437] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  213.000137] br-test-2: port 3(e-dhcp-tst2) entered disabled state
[  213.007993] device e-dhcp-tst2 entered promiscuous mode
[  213.012857] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  213.017865] br-test-2: port 3(e-dhcp-tst2) entered forwarding state
[  213.046595] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  213.052778] br-test-3: port 3(e-dhcp-tst3) entered disabled state
[  213.059453] device e-dhcp-tst3 entered promiscuous mode
[  213.067155] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  213.071813] br-test-3: port 3(e-dhcp-tst3) entered forwarding state
[  213.664568] br-fonera: port 3(e-dhcp-fone) entered disabled state
[  213.671117] br-factory: port 3(e-dhcp-fact) entered disabled state
[  213.682617] br-test-1: port 3(e-dhcp-tst1) entered disabled state
[  213.709318] br-test-2: port 3(e-dhcp-tst2) entered disabled state
[  213.722250] br-test-3: port 3(e-dhcp-tst3) entered disabled state
[  213.939544] EXT4-fs (dm-94): couldn't mount as ext3 due to feature incompatibilities
[  213.959320] EXT4-fs (dm-94): mounted filesystem with ordered data mode. Opts: (null)
[  213.968773] eth-admin: renamed from vethYJO5QM
[  214.025434] eth-alarm: renamed from vethVCTG8R
[  214.083877] eth-user: renamed from vethH72OAQ
[  214.138888] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  214.145627] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-adm: link becomes ready
[  214.152898] br-admin: port 4(e-dhcp-adm) entered blocking state
[  214.157454] br-admin: port 4(e-dhcp-adm) entered forwarding state
[  214.163817] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  214.190765] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-alar: link becomes ready
[  214.196590] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  214.196601] br-alarm: port 3(e-dhcp-alar) entered forwarding state
[  214.198084] eth-ntp: renamed from vethDFSRAP
[  214.226817] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  214.227315] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-usr: link becomes ready
[  214.227596] br-user: port 4(e-dhcp-usr) entered blocking state
[  214.227606] br-user: port 4(e-dhcp-usr) entered forwarding state
[  214.229025] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  214.229531] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-ntp: link becomes ready
[  214.229825] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  214.229840] br-ntp: port 3(e-dhcp-ntp) entered forwarding state
[  214.232900] eth-vpn: renamed from veth616UR5
[  214.298392] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  214.305866] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-vpn: link becomes ready
[  214.318617] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  214.323004] br-vpn: port 3(e-dhcp-vpn) entered forwarding state
[  214.323763] eth-wifi: renamed from veth7H0GTG
[  214.401866] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  214.407661] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-wifi: link becomes ready
[  214.419184] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  214.423752] br-wifi: port 3(e-dhcp-wifi) entered forwarding state
[  214.443123] eth-srv: renamed from vethQ6PVM2
[  214.499155] eth-trust: renamed from veth598JJL
[  214.547584] EXT4-fs (dm-77): re-mounted. Opts: (null)
[  214.555922] eth-foner: renamed from vethUPK7TP
[  214.599292] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  214.599698] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-srv: link becomes ready
[  214.613710] br-service: port 4(e-dhcp-srv) entered blocking state
[  214.618449] br-service: port 4(e-dhcp-srv) entered forwarding state
[  214.638627] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  214.653313] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-trus: link becomes ready
[  214.665558] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  214.670383] br-trusted: port 3(e-dhcp-trus) entered forwarding state
[  214.702868] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  214.711111] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-fone: link becomes ready
[  214.726032] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  214.730787] br-fonera: port 3(e-dhcp-fone) entered forwarding state
[  214.752473] eth-fact: renamed from vethBC0OL1
[  214.812309] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  214.819347] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-fact: link becomes ready
[  214.825625] br-factory: port 3(e-dhcp-fact) entered blocking state
[  214.831007] br-factory: port 3(e-dhcp-fact) entered forwarding state
[  214.845215] eth-tst1: renamed from veth3RPSF5
[  214.894475] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  214.900411] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst1: link becomes ready
[  214.908284] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  214.913031] br-test-1: port 3(e-dhcp-tst1) entered forwarding state
[  214.921442] eth-tst2: renamed from veth8IKH6N
[  214.994320] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  215.000315] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst2: link becomes ready
[  215.007519] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  215.012499] br-test-2: port 3(e-dhcp-tst2) entered forwarding state
[  215.036331] eth-tst3: renamed from vethJ8TAM7
[  215.099968] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  215.105850] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst3: link becomes ready
[  215.113273] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  215.118135] br-test-3: port 3(e-dhcp-tst3) entered forwarding state
[  215.224649] EXT4-fs (dm-95): mounted filesystem with ordered data mode. Opts: (null)
[  215.299049] EXT4-fs (dm-96): mounted filesystem with ordered data mode. Opts: (null)
[  215.374842] EXT4-fs (dm-97): mounted filesystem with ordered data mode. Opts: (null)
[  215.446004] EXT4-fs (dm-98): mounted filesystem with ordered data mode. Opts: (null)
[  215.502645] EXT4-fs (dm-99): mounted filesystem with ordered data mode. Opts: (null)
[  215.566872] EXT4-fs (dm-100): mounted filesystem with ordered data mode. Opts: (null)
[  215.622842] EXT4-fs (dm-101): mounted filesystem with ordered data mode. Opts: (null)
[  215.694491] EXT4-fs (dm-102): mounted filesystem with ordered data mode. Opts: (null)
[  215.838575] br-admin: port 5(e-sysl-adm) entered blocking state
[  215.843474] br-admin: port 5(e-sysl-adm) entered disabled state
[  215.843879] device e-sysl-adm entered promiscuous mode
[  215.866515] br-alarm: port 4(e-sysl-alar) entered blocking state
[  215.871122] br-alarm: port 4(e-sysl-alar) entered disabled state
[  215.877363] device e-sysl-alar entered promiscuous mode
[  215.883073] br-alarm: port 4(e-sysl-alar) entered blocking state
[  215.888250] br-alarm: port 4(e-sysl-alar) entered forwarding state
[  215.908785] br-user: port 5(e-sysl-usr) entered blocking state
[  215.913258] br-user: port 5(e-sysl-usr) entered disabled state
[  215.919926] device e-sysl-usr entered promiscuous mode
[  215.920397] br-user: port 5(e-sysl-usr) entered blocking state
[  215.929933] br-user: port 5(e-sysl-usr) entered forwarding state
[  215.944292] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  215.948626] br-ntp: port 4(e-sysl-ntp) entered disabled state
[  215.948969] device e-sysl-ntp entered promiscuous mode
[  215.950155] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  215.965160] br-ntp: port 4(e-sysl-ntp) entered forwarding state
[  215.980318] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  215.985491] br-vpn: port 4(e-sysl-vpn) entered disabled state
[  215.990770] device e-sysl-vpn entered promiscuous mode
[  215.992123] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  216.001179] br-vpn: port 4(e-sysl-vpn) entered forwarding state
[  216.024718] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  216.031123] br-wifi: port 4(e-sysl-wifi) entered disabled state
[  216.035995] device e-sysl-wifi entered promiscuous mode
[  216.042461] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  216.046973] br-wifi: port 4(e-sysl-wifi) entered forwarding state
[  216.061982] br-service: port 5(e-sysl-srv) entered blocking state
[  216.061991] br-service: port 5(e-sysl-srv) entered disabled state
[  216.062406] device e-sysl-srv entered promiscuous mode
[  216.081163] br-service: port 5(e-sysl-srv) entered blocking state
[  216.085863] br-service: port 5(e-sysl-srv) entered forwarding state
[  216.112629] br-trusted: port 4(e-sysl-trus) entered blocking state
[  216.119155] br-trusted: port 4(e-sysl-trus) entered disabled state
[  216.119963] device e-sysl-trus entered promiscuous mode
[  216.131413] br-trusted: port 4(e-sysl-trus) entered blocking state
[  216.136175] br-trusted: port 4(e-sysl-trus) entered forwarding state
[  216.169797] br-fonera: port 4(e-sysl-fone) entered blocking state
[  216.175290] br-fonera: port 4(e-sysl-fone) entered disabled state
[  216.175683] device e-sysl-fone entered promiscuous mode
[  216.195934] br-fonera: port 4(e-sysl-fone) entered blocking state
[  216.200612] br-fonera: port 4(e-sysl-fone) entered forwarding state
[  216.254819] br-factory: port 4(e-sysl-fact) entered blocking state
[  216.259578] br-factory: port 4(e-sysl-fact) entered disabled state
[  216.259923] device e-sysl-fact entered promiscuous mode
[  216.260459] br-factory: port 4(e-sysl-fact) entered blocking state
[  216.260467] br-factory: port 4(e-sysl-fact) entered forwarding state
[  216.285788] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  216.285796] br-test-1: port 4(e-sysl-tst1) entered disabled state
[  216.286147] device e-sysl-tst1 entered promiscuous mode
[  216.287479] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  216.287489] br-test-1: port 4(e-sysl-tst1) entered forwarding state
[  216.309892] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  216.368096] br-test-2: port 4(e-sysl-tst2) entered disabled state
[  216.374418] device e-sysl-tst2 entered promiscuous mode
[  216.381161] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  216.385817] br-test-2: port 4(e-sysl-tst2) entered forwarding state
[  216.420530] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  216.425276] br-test-3: port 4(e-sysl-tst3) entered disabled state
[  216.432205] device e-sysl-tst3 entered promiscuous mode
[  216.437602] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  216.442542] br-test-3: port 4(e-sysl-tst3) entered forwarding state
[  216.896102] br-alarm: port 4(e-sysl-alar) entered disabled state
[  216.901226] br-user: port 5(e-sysl-usr) entered disabled state
[  216.911596] br-ntp: port 4(e-sysl-ntp) entered disabled state
[  216.920825] br-vpn: port 4(e-sysl-vpn) entered disabled state
[  216.965543] br-wifi: port 4(e-sysl-wifi) entered disabled state
[  217.058483] br-service: port 5(e-sysl-srv) entered disabled state
[  217.070082] br-trusted: port 4(e-sysl-trus) entered disabled state
[  217.085398] br-fonera: port 4(e-sysl-fone) entered disabled state
[  217.093548] br-factory: port 4(e-sysl-fact) entered disabled state
[  217.100272] br-test-1: port 4(e-sysl-tst1) entered disabled state
[  217.121909] br-test-2: port 4(e-sysl-tst2) entered disabled state
[  217.128408] br-test-3: port 4(e-sysl-tst3) entered disabled state
[  217.518319] EXT4-fs (dm-85): couldn't mount as ext3 due to feature incompatibilities
[  217.553656] EXT4-fs (dm-85): mounted filesystem with ordered data mode. Opts: (null)
[  217.568695] eth-admin: renamed from veth249EWG
[  217.617275] eth-alarm: renamed from veth1AE6MB
[  217.672622] eth-user: renamed from vethXU1QYD
[  217.711085] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  217.718862] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-adm: link becomes ready
[  217.724858] br-admin: port 5(e-sysl-adm) entered blocking state
[  217.730165] br-admin: port 5(e-sysl-adm) entered forwarding state
[  217.738422] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  217.746146] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-alar: link becomes ready
[  217.752005] br-alarm: port 4(e-sysl-alar) entered blocking state
[  217.757661] br-alarm: port 4(e-sysl-alar) entered forwarding state
[  217.765597] eth-ntp: renamed from veth9M3XJG
[  217.816652] eth-vpn: renamed from veth5K6SUN
[  217.831046] EXT4-fs (dm-95): re-mounted. Opts: (null)
[  217.867351] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  217.873104] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-usr: link becomes ready
[  217.881337] br-user: port 5(e-sysl-usr) entered blocking state
[  217.885828] br-user: port 5(e-sysl-usr) entered forwarding state
[  217.897912] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  217.903653] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-ntp: link becomes ready
[  217.910770] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  217.915536] br-ntp: port 4(e-sysl-ntp) entered forwarding state
[  217.922882] eth-wifi: renamed from veth36QYX9
[  217.972360] eth-srv: renamed from vethA21SAR
[  218.019363] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  218.026839] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-vpn: link becomes ready
[  218.032861] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  218.037994] br-vpn: port 4(e-sysl-vpn) entered forwarding state
[  218.047947] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  218.054645] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-wifi: link becomes ready
[  218.060327] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  218.066045] br-wifi: port 4(e-sysl-wifi) entered forwarding state
[  218.073144] eth-trust: renamed from vethKNUAKV
[  218.124814] eth-foner: renamed from vethRXVLKF
[  218.168685] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  218.175907] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-srv: link becomes ready
[  218.183849] br-service: port 5(e-sysl-srv) entered blocking state
[  218.183861] br-service: port 5(e-sysl-srv) entered forwarding state
[  218.195146] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  218.202081] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-trus: link becomes ready
[  218.202419] br-trusted: port 4(e-sysl-trus) entered blocking state
[  218.214457] br-trusted: port 4(e-sysl-trus) entered forwarding state
[  218.216961] eth-fact: renamed from vethCFCN06
[  218.260697] eth-tst1: renamed from vethP25XTE
[  218.311267] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  218.317168] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-fone: link becomes ready
[  218.324086] br-fonera: port 4(e-sysl-fone) entered blocking state
[  218.329540] br-fonera: port 4(e-sysl-fone) entered forwarding state
[  218.332387] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  218.345700] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-fact: link becomes ready
[  218.351595] br-factory: port 4(e-sysl-fact) entered blocking state
[  218.351609] br-factory: port 4(e-sysl-fact) entered forwarding state
[  218.359859] eth-tst2: renamed from veth6QGWLT
[  218.420043] eth-tst3: renamed from veth1MHIPU
[  218.471413] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  218.477322] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst1: link becomes ready
[  218.485676] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  218.490416] br-test-1: port 4(e-sysl-tst1) entered forwarding state
[  218.490783] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  218.506644] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst2: link becomes ready
[  218.512532] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  218.518273] br-test-2: port 4(e-sysl-tst2) entered forwarding state
[  218.526542] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  218.535144] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst3: link becomes ready
[  218.545981] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  218.550724] br-test-3: port 4(e-sysl-tst3) entered forwarding state
[  218.568496] EXT4-fs (dm-86): mounted filesystem with ordered data mode. Opts: (null)
[  218.591592] EXT4-fs (dm-87): mounted filesystem with ordered data mode. Opts: (null)
[  218.625103] EXT4-fs (dm-88): mounted filesystem with ordered data mode. Opts: (null)
[  218.648507] EXT4-fs (dm-89): mounted filesystem with ordered data mode. Opts: (null)
[  218.690731] EXT4-fs (dm-90): mounted filesystem with ordered data mode. Opts: (null)
[  218.765210] EXT4-fs (dm-91): mounted filesystem with ordered data mode. Opts: (null)
[  218.797643] EXT4-fs (dm-92): mounted filesystem with ordered data mode. Opts: (null)
[  218.819396] EXT4-fs (dm-93): mounted filesystem with ordered data mode. Opts: (null)
[  218.935259] br-admin: port 6(e-ntp-adm) entered blocking state
[  218.939830] br-admin: port 6(e-ntp-adm) entered disabled state
[  218.940296] device e-ntp-adm entered promiscuous mode
[  218.951505] br-admin: port 6(e-ntp-adm) entered blocking state
[  218.956412] br-admin: port 6(e-ntp-adm) entered forwarding state
[  218.972701] br-alarm: port 5(e-ntp-alar) entered blocking state
[  218.977270] br-alarm: port 5(e-ntp-alar) entered disabled state
[  218.977653] device e-ntp-alar entered promiscuous mode
[  218.996380] br-alarm: port 5(e-ntp-alar) entered blocking state
[  219.000880] br-alarm: port 5(e-ntp-alar) entered forwarding state
[  219.022707] br-admin: port 6(e-ntp-adm) entered disabled state
[  219.028048] br-alarm: port 5(e-ntp-alar) entered disabled state
[  219.039608] br-user: port 6(e-ntp-usr) entered blocking state
[  219.044144] br-user: port 6(e-ntp-usr) entered disabled state
[  219.050717] device e-ntp-usr entered promiscuous mode
[  219.055675] br-user: port 6(e-ntp-usr) entered blocking state
[  219.060398] br-user: port 6(e-ntp-usr) entered forwarding state
[  219.090552] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  219.094797] br-ntp: port 5(e-ntp-ntp) entered disabled state
[  219.103026] device e-ntp-ntp entered promiscuous mode
[  219.108887] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  219.113155] br-ntp: port 5(e-ntp-ntp) entered forwarding state
[  219.146542] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  219.150772] br-vpn: port 5(e-ntp-vpn) entered disabled state
[  219.159053] device e-ntp-vpn entered promiscuous mode
[  219.165624] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  219.169874] br-vpn: port 5(e-ntp-vpn) entered forwarding state
[  219.191303] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  219.197847] br-wifi: port 5(e-ntp-wifi) entered disabled state
[  219.205333] device e-ntp-wifi entered promiscuous mode
[  219.211335] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  219.215763] br-wifi: port 5(e-ntp-wifi) entered forwarding state
[  219.235632] br-service: port 6(e-ntp-srv) entered blocking state
[  219.240276] br-service: port 6(e-ntp-srv) entered disabled state
[  219.240660] device e-ntp-srv entered promiscuous mode
[  219.241233] br-service: port 6(e-ntp-srv) entered blocking state
[  219.241241] br-service: port 6(e-ntp-srv) entered forwarding state
[  219.264065] br-trusted: port 5(e-ntp-trus) entered blocking state
[  219.283188] br-trusted: port 5(e-ntp-trus) entered disabled state
[  219.283853] device e-ntp-trus entered promiscuous mode
[  219.293548] br-trusted: port 5(e-ntp-trus) entered blocking state
[  219.299044] br-trusted: port 5(e-ntp-trus) entered forwarding state
[  219.321964] br-fonera: port 5(e-ntp-fone) entered blocking state
[  219.327111] br-fonera: port 5(e-ntp-fone) entered disabled state
[  219.327525] device e-ntp-fone entered promiscuous mode
[  219.328820] br-fonera: port 5(e-ntp-fone) entered blocking state
[  219.328830] br-fonera: port 5(e-ntp-fone) entered forwarding state
[  219.361610] br-factory: port 5(e-ntp-fact) entered blocking state
[  219.372948] br-factory: port 5(e-ntp-fact) entered disabled state
[  219.373379] device e-ntp-fact entered promiscuous mode
[  219.384894] br-factory: port 5(e-ntp-fact) entered blocking state
[  219.389574] br-factory: port 5(e-ntp-fact) entered forwarding state
[  219.433959] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  219.441818] br-test-1: port 5(e-ntp-tst1) entered disabled state
[  219.447399] device e-ntp-tst1 entered promiscuous mode
[  219.454755] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  219.459349] br-test-1: port 5(e-ntp-tst1) entered forwarding state
[  219.491373] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  219.495970] br-test-2: port 5(e-ntp-tst2) entered disabled state
[  219.496695] device e-ntp-tst2 entered promiscuous mode
[  219.509276] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  219.513858] br-test-2: port 5(e-ntp-tst2) entered forwarding state
[  219.563970] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  219.573007] br-test-3: port 5(e-ntp-tst3) entered disabled state
[  219.587431] device e-ntp-tst3 entered promiscuous mode
[  219.598762] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  219.603354] br-test-3: port 5(e-ntp-tst3) entered forwarding state
[  220.101072] br-user: port 6(e-ntp-usr) entered disabled state
[  220.105896] br-ntp: port 5(e-ntp-ntp) entered disabled state
[  220.112041] br-vpn: port 5(e-ntp-vpn) entered disabled state
[  220.124178] br-wifi: port 5(e-ntp-wifi) entered disabled state
[  220.129093] br-service: port 6(e-ntp-srv) entered disabled state
[  220.136248] br-trusted: port 5(e-ntp-trus) entered disabled state
[  220.144904] br-fonera: port 5(e-ntp-fone) entered disabled state
[  220.152916] br-factory: port 5(e-ntp-fact) entered disabled state
[  220.158042] br-test-1: port 5(e-ntp-tst1) entered disabled state
[  220.169765] br-test-2: port 5(e-ntp-tst2) entered disabled state
[  220.185013] br-test-3: port 5(e-ntp-tst3) entered disabled state
[  220.466007] EXT4-fs (dm-56): couldn't mount as ext3 due to feature incompatibilities
[  220.534734] EXT4-fs (dm-56): mounted filesystem with ordered data mode. Opts: (null)
[  220.547344] eth-admin: renamed from vethT3UQJQ
[  220.596029] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  220.601905] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-adm: link becomes ready
[  220.610942] br-admin: port 6(e-ntp-adm) entered blocking state
[  220.615414] br-admin: port 6(e-ntp-adm) entered forwarding state
[  220.628617] eth-alarm: renamed from veth5Y1DQQ
[  220.699950] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  220.705825] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-alar: link becomes ready
[  220.715617] br-alarm: port 5(e-ntp-alar) entered blocking state
[  220.720179] br-alarm: port 5(e-ntp-alar) entered forwarding state
[  220.736024] eth-user: renamed from vethVGR9SI
[  220.791211] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  220.796962] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-usr: link becomes ready
[  220.805324] br-user: port 6(e-ntp-usr) entered blocking state
[  220.809731] br-user: port 6(e-ntp-usr) entered forwarding state
[  220.823581] eth-ntp: renamed from veth0LYQXD
[  220.896839] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  220.902973] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-ntp: link becomes ready
[  220.909971] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  220.914305] br-ntp: port 5(e-ntp-ntp) entered forwarding state
[  220.931188] eth-vpn: renamed from veth6061UX
[  221.000397] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  221.006124] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-vpn: link becomes ready
[  221.014981] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  221.019281] br-vpn: port 5(e-ntp-vpn) entered forwarding state
[  221.043632] eth-wifi: renamed from vethHKNS9V
[  221.076989] EXT4-fs (dm-86): re-mounted. Opts: (null)
[  221.108427] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  221.114328] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-wifi: link becomes ready
[  221.121000] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  221.126275] br-wifi: port 5(e-ntp-wifi) entered forwarding state
[  221.140088] eth-srv: renamed from vethNLQ8RM
[  221.212128] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  221.219438] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-srv: link becomes ready
[  221.225254] br-service: port 6(e-ntp-srv) entered blocking state
[  221.230761] br-service: port 6(e-ntp-srv) entered forwarding state
[  221.247856] eth-trust: renamed from vethLGHJX5
[  221.305100] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  221.310934] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-trus: link becomes ready
[  221.321029] br-trusted: port 5(e-ntp-trus) entered blocking state
[  221.325775] br-trusted: port 5(e-ntp-trus) entered forwarding state
[  221.331078] eth-foner: renamed from vethLPDR9V
[  221.406361] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  221.413345] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-fone: link becomes ready
[  221.420077] br-fonera: port 5(e-ntp-fone) entered blocking state
[  221.424750] br-fonera: port 5(e-ntp-fone) entered forwarding state
[  221.439199] eth-fact: renamed from vethLQATV5
[  221.519922] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  221.525684] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-fact: link becomes ready
[  221.535060] br-factory: port 5(e-ntp-fact) entered blocking state
[  221.539801] br-factory: port 5(e-ntp-fact) entered forwarding state
[  221.545088] eth-tst1: renamed from vethR8Y583
[  221.609374] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  221.616756] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst1: link becomes ready
[  221.623411] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  221.628177] br-test-1: port 5(e-ntp-tst1) entered forwarding state
[  221.639506] eth-tst2: renamed from veth2C6049
[  221.704930] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  221.710991] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst2: link becomes ready
[  221.717437] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  221.722916] br-test-2: port 5(e-ntp-tst2) entered forwarding state
[  221.729572] eth-tst3: renamed from veth5RB3N4
[  221.786735] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  221.792518] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst3: link becomes ready
[  221.802680] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  221.807324] br-test-3: port 5(e-ntp-tst3) entered forwarding state
[  221.898120] EXT4-fs (dm-57): mounted filesystem with ordered data mode. Opts: (null)
[  221.987149] EXT4-fs (dm-58): mounted filesystem with ordered data mode. Opts: (null)
[  222.074878] EXT4-fs (dm-59): mounted filesystem with ordered data mode. Opts: (null)
[  222.146807] EXT4-fs (dm-60): mounted filesystem with ordered data mode. Opts: (null)
[  222.222756] EXT4-fs (dm-61): mounted filesystem with ordered data mode. Opts: (null)
[  222.293571] EXT4-fs (dm-62): mounted filesystem with ordered data mode. Opts: (null)
[  222.358693] EXT4-fs (dm-63): mounted filesystem with ordered data mode. Opts: (null)
[  222.426499] EXT4-fs (dm-64): mounted filesystem with ordered data mode. Opts: (null)
[  222.597436] br-admin: port 7(e-mmon-adm) entered blocking state
[  222.602050] br-admin: port 7(e-mmon-adm) entered disabled state
[  222.603421] device e-mmon-adm entered promiscuous mode
[  222.629087] br-user: port 7(e-mmon-usr) entered blocking state
[  222.633511] br-user: port 7(e-mmon-usr) entered disabled state
[  222.634032] device e-mmon-usr entered promiscuous mode
[  222.645137] br-user: port 7(e-mmon-usr) entered blocking state
[  222.645145] br-user: port 7(e-mmon-usr) entered forwarding state
[  222.658147] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  222.662673] br-wifi: port 6(e-mmon-wifi) entered disabled state
[  222.663186] device e-mmon-wifi entered promiscuous mode
[  222.674466] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  222.679635] br-wifi: port 6(e-mmon-wifi) entered forwarding state
[  222.695880] br-service: port 7(e-mmon-srv) entered blocking state
[  222.701244] br-service: port 7(e-mmon-srv) entered disabled state
[  222.707616] device e-mmon-srv entered promiscuous mode
[  222.714182] br-service: port 7(e-mmon-srv) entered blocking state
[  222.718936] br-service: port 7(e-mmon-srv) entered forwarding state
[  222.736938] br-factory: port 6(e-mmon-fact) entered blocking state
[  222.743114] br-factory: port 6(e-mmon-fact) entered disabled state
[  222.748311] device e-mmon-fact entered promiscuous mode
[  222.754731] br-factory: port 6(e-mmon-fact) entered blocking state
[  222.759480] br-factory: port 6(e-mmon-fact) entered forwarding state
[  223.071918] EXT4-fs (dm-37): couldn't mount as ext3 due to feature incompatibilities
[  223.122021] EXT4-fs (dm-37): mounted filesystem with ordered data mode. Opts: (null)
[  223.139874] eth-admin: renamed from vethKOCK9A
[  223.200283] br-user: port 7(e-mmon-usr) entered disabled state
[  223.205475] br-wifi: port 6(e-mmon-wifi) entered disabled state
[  223.211510] br-service: port 7(e-mmon-srv) entered disabled state
[  223.222613] br-factory: port 6(e-mmon-fact) entered disabled state
[  223.227795] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  223.234636] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-adm: link becomes ready
[  223.249624] br-admin: port 7(e-mmon-adm) entered blocking state
[  223.254184] br-admin: port 7(e-mmon-adm) entered forwarding state
[  223.268333] eth-user: renamed from vethP0PME6
[  223.312546] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-usr: link becomes ready
[  223.319050] br-user: port 7(e-mmon-usr) entered blocking state
[  223.323765] br-user: port 7(e-mmon-usr) entered forwarding state
[  223.335567] eth-wifi: renamed from vethL3LY6C
[  223.404052] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-wifi: link becomes ready
[  223.409927] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  223.415448] br-wifi: port 6(e-mmon-wifi) entered forwarding state
[  223.429537] eth-srv: renamed from vethJ430TS
[  223.488825] eth-fact: renamed from veth0KA21L
[  223.532053] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-srv: link becomes ready
[  223.537862] br-service: port 7(e-mmon-srv) entered blocking state
[  223.543539] br-service: port 7(e-mmon-srv) entered forwarding state
[  223.569694] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-fact: link becomes ready
[  223.575584] br-factory: port 6(e-mmon-fact) entered blocking state
[  223.581351] br-factory: port 6(e-mmon-fact) entered forwarding state
[  223.642153] EXT4-fs (dm-38): mounted filesystem with ordered data mode. Opts: (null)
[  223.695266] EXT4-fs (dm-39): mounted filesystem with ordered data mode. Opts: (null)
[  223.750602] EXT4-fs (dm-40): mounted filesystem with ordered data mode. Opts: (null)
[  223.802837] EXT4-fs (dm-41): mounted filesystem with ordered data mode. Opts: (null)
[  223.847142] EXT4-fs (dm-42): mounted filesystem with ordered data mode. Opts: (null)
[  223.895777] EXT4-fs (dm-43): mounted filesystem with ordered data mode. Opts: (null)
[  223.946444] EXT4-fs (dm-44): mounted filesystem with ordered data mode. Opts: (null)
[  224.002198] EXT4-fs (dm-45): mounted filesystem with ordered data mode. Opts: (null)
[  224.046557] EXT4-fs (dm-46): mounted filesystem with ordered data mode. Opts: (null)
[  224.177244] br-admin: port 8(e-fire-adm) entered blocking state
[  224.181843] br-admin: port 8(e-fire-adm) entered disabled state
[  224.182331] device e-fire-adm entered promiscuous mode
[  224.204489] br-alarm: port 6(e-fire-alar) entered blocking state
[  224.211594] br-alarm: port 6(e-fire-alar) entered disabled state
[  224.216563] device e-fire-alar entered promiscuous mode
[  224.217620] br-alarm: port 6(e-fire-alar) entered blocking state
[  224.227349] br-alarm: port 6(e-fire-alar) entered forwarding state
[  224.241918] br-user: port 8(e-fire-usr) entered blocking state
[  224.246362] br-user: port 8(e-fire-usr) entered disabled state
[  224.247101] device e-fire-usr entered promiscuous mode
[  224.257953] br-user: port 8(e-fire-usr) entered blocking state
[  224.263084] br-user: port 8(e-fire-usr) entered forwarding state
[  224.288190] br-ntp: port 6(e-fire-ntp) entered blocking state
[  224.292535] br-ntp: port 6(e-fire-ntp) entered disabled state
[  224.293061] device e-fire-ntp entered promiscuous mode
[  224.303931] br-ntp: port 6(e-fire-ntp) entered blocking state
[  224.309093] br-ntp: port 6(e-fire-ntp) entered forwarding state
[  224.328672] br-vpn: port 6(e-fire-vpn) entered blocking state
[  224.339125] br-vpn: port 6(e-fire-vpn) entered disabled state
[  224.344618] device e-fire-vpn entered promiscuous mode
[  224.345256] br-vpn: port 6(e-fire-vpn) entered blocking state
[  224.345264] br-vpn: port 6(e-fire-vpn) entered forwarding state
[  224.404481] br-wifi: port 7(e-fire-wifi) entered blocking state
[  224.408972] br-wifi: port 7(e-fire-wifi) entered disabled state
[  224.409297] device e-fire-wifi entered promiscuous mode
[  224.409915] br-wifi: port 7(e-fire-wifi) entered blocking state
[  224.425954] br-wifi: port 7(e-fire-wifi) entered forwarding state
[  224.462799] br-service: port 8(e-fire-srv) entered blocking state
[  224.469030] br-service: port 8(e-fire-srv) entered disabled state
[  224.474713] device e-fire-srv entered promiscuous mode
[  224.479788] br-service: port 8(e-fire-srv) entered blocking state
[  224.484891] br-service: port 8(e-fire-srv) entered forwarding state
[  224.540882] br-test-1: port 6(e-fire-tst1) entered blocking state
[  224.545675] br-test-1: port 6(e-fire-tst1) entered disabled state
[  224.546043] device e-fire-tst1 entered promiscuous mode
[  224.548019] br-test-1: port 6(e-fire-tst1) entered blocking state
[  224.548030] br-test-1: port 6(e-fire-tst1) entered forwarding state
[  224.616225] br-test-2: port 6(e-fire-tst2) entered blocking state
[  224.631471] br-test-2: port 6(e-fire-tst2) entered disabled state
[  224.638903] device e-fire-tst2 entered promiscuous mode
[  224.651775] br-test-2: port 6(e-fire-tst2) entered blocking state
[  224.656446] br-test-2: port 6(e-fire-tst2) entered forwarding state
[  224.710139] br-test-3: port 6(e-fire-tst3) entered blocking state
[  224.718289] br-test-3: port 6(e-fire-tst3) entered disabled state
[  224.725359] device e-fire-tst3 entered promiscuous mode
[  224.731528] br-test-3: port 6(e-fire-tst3) entered blocking state
[  224.736179] br-test-3: port 6(e-fire-tst3) entered forwarding state
[  224.787345] br-trusted: port 6(e-fire-trus) entered blocking state
[  224.793788] br-trusted: port 6(e-fire-trus) entered disabled state
[  224.794174] device e-fire-trus entered promiscuous mode
[  224.795552] br-trusted: port 6(e-fire-trus) entered blocking state
[  224.795560] br-trusted: port 6(e-fire-trus) entered forwarding state
[  224.847205] br-fonera: port 6(e-fire-fone) entered blocking state
[  224.847210] br-fonera: port 6(e-fire-fone) entered disabled state
[  224.847423] device e-fire-fone entered promiscuous mode
[  224.847763] br-fonera: port 6(e-fire-fone) entered blocking state
[  224.847768] br-fonera: port 6(e-fire-fone) entered forwarding state
[  224.901707] br-wan: port 2(e-fire-wan) entered blocking state
[  224.901717] br-wan: port 2(e-fire-wan) entered disabled state
[  224.902109] device e-fire-wan entered promiscuous mode
[  224.906135] br-wan: port 2(e-fire-wan) entered blocking state
[  224.906144] br-wan: port 2(e-fire-wan) entered forwarding state
[  224.935861] br-factory: port 7(e-fire-fact) entered blocking state
[  224.935871] br-factory: port 7(e-fire-fact) entered disabled state
[  224.936221] device e-fire-fact entered promiscuous mode
[  224.936795] br-factory: port 7(e-fire-fact) entered blocking state
[  224.936804] br-factory: port 7(e-fire-fact) entered forwarding state
[  225.239795] br-alarm: port 6(e-fire-alar) entered disabled state
[  225.244970] br-user: port 8(e-fire-usr) entered disabled state
[  225.250960] br-ntp: port 6(e-fire-ntp) entered disabled state
[  225.273021] br-vpn: port 6(e-fire-vpn) entered disabled state
[  225.278873] br-wifi: port 7(e-fire-wifi) entered disabled state
[  225.286478] br-service: port 8(e-fire-srv) entered disabled state
[  225.298692] br-test-1: port 6(e-fire-tst1) entered disabled state
[  225.305588] br-test-2: port 6(e-fire-tst2) entered disabled state
[  225.311318] br-test-3: port 6(e-fire-tst3) entered disabled state
[  225.317361] br-trusted: port 6(e-fire-trus) entered disabled state
[  225.323326] br-fonera: port 6(e-fire-fone) entered disabled state
[  225.330731] br-wan: port 2(e-fire-wan) entered disabled state
[  225.336112] br-factory: port 7(e-fire-fact) entered disabled state
[  225.971065] EXT4-fs (dm-9): couldn't mount as ext3 due to feature incompatibilities
[  226.030743] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
[  226.041871] eth-admin: renamed from vethMH2TRK
[  226.157106] eth-alarm: renamed from veth84QV8D
[  226.204271] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  226.210181] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-adm: link becomes ready
[  226.216937] br-admin: port 8(e-fire-adm) entered blocking state
[  226.222263] br-admin: port 8(e-fire-adm) entered forwarding state
[  226.248752] eth-user: renamed from veth8ME0MX
[  226.297538] eth-ntp: renamed from vethS0CNIU
[  226.343579] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  226.350112] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-alar: link becomes ready
[  226.357129] br-alarm: port 6(e-fire-alar) entered blocking state
[  226.361817] br-alarm: port 6(e-fire-alar) entered forwarding state
[  226.372173] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  226.381925] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-usr: link becomes ready
[  226.387833] br-user: port 8(e-fire-usr) entered blocking state
[  226.393160] br-user: port 8(e-fire-usr) entered forwarding state
[  226.405332] eth-vpn: renamed from vethLATX37
[  226.442318] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  226.448009] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-ntp: link becomes ready
[  226.455338] br-ntp: port 6(e-fire-ntp) entered blocking state
[  226.459995] br-ntp: port 6(e-fire-ntp) entered forwarding state
[  226.460235] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  226.474654] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-vpn: link becomes ready
[  226.480471] br-vpn: port 6(e-fire-vpn) entered blocking state
[  226.485830] br-vpn: port 6(e-fire-vpn) entered forwarding state
[  226.493124] eth-wifi: renamed from vethT49VD0
[  226.600743] eth-srv: renamed from veth7XY5WR
[  226.694889] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  226.700674] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-wifi: link becomes ready
[  226.708169] br-wifi: port 7(e-fire-wifi) entered blocking state
[  226.712917] br-wifi: port 7(e-fire-wifi) entered forwarding state
[  226.743051] eth-tst1: renamed from vethAJ5JJ6
[  226.814082] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  226.819786] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-srv: link becomes ready
[  226.827243] br-service: port 8(e-fire-srv) entered blocking state
[  226.832086] br-service: port 8(e-fire-srv) entered forwarding state
[  226.863720] eth-tst2: renamed from veth2XGR2U
[  226.928519] eth-tst3: renamed from veth1WW04Q
[  227.003177] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  227.009622] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst1: link becomes ready
[  227.016270] br-test-1: port 6(e-fire-tst1) entered blocking state
[  227.016281] br-test-1: port 6(e-fire-tst1) entered forwarding state
[  227.046467] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  227.052340] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst2: link becomes ready
[  227.074686] br-test-2: port 6(e-fire-tst2) entered blocking state
[  227.079415] br-test-2: port 6(e-fire-tst2) entered forwarding state
[  227.099775] eth-trust: renamed from vethIQBLMF
[  227.160436] eth-foner: renamed from vethTTLXN0
[  227.200474] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  227.207287] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst3: link becomes ready
[  227.213169] br-test-3: port 6(e-fire-tst3) entered blocking state
[  227.213521] EXT4-fs (dm-38): re-mounted. Opts: (null)
[  227.218870] br-test-3: port 6(e-fire-tst3) entered forwarding state
[  227.234646] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  227.240448] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-trus: link becomes ready
[  227.248063] br-trusted: port 6(e-fire-trus) entered blocking state
[  227.253002] br-trusted: port 6(e-fire-trus) entered forwarding state
[  227.264096] eth-wan: renamed from veth7O00R1
[  227.312150] eth-fact: renamed from vethOC813R
[  227.392131] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  227.399410] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-fone: link becomes ready
[  227.405594] br-fonera: port 6(e-fire-fone) entered blocking state
[  227.411001] br-fonera: port 6(e-fire-fone) entered forwarding state
[  227.411292] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wan: link becomes ready
[  227.411713] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-wan: link becomes ready
[  227.430901] br-wan: port 2(e-fire-wan) entered blocking state
[  227.436222] br-wan: port 2(e-fire-wan) entered forwarding state
[  227.453038] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  227.458790] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-fact: link becomes ready
[  227.466525] br-factory: port 7(e-fire-fact) entered blocking state
[  227.471347] br-factory: port 7(e-fire-fact) entered forwarding state
[  227.517511] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
[  227.549361] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
[  227.586451] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
[  227.619078] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
[  227.647225] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
[  227.668893] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
[  227.696696] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: (null)
[  227.723060] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: (null)
[  227.853200] br-admin: port 9(e-auth-adm) entered blocking state
[  227.857837] br-admin: port 9(e-auth-adm) entered disabled state
[  227.864624] device e-auth-adm entered promiscuous mode
[  227.869912] br-admin: port 9(e-auth-adm) entered blocking state
[  227.874610] br-admin: port 9(e-auth-adm) entered forwarding state
[  227.902741] br-user: port 9(e-auth-usr) entered blocking state
[  227.902750] br-user: port 9(e-auth-usr) entered disabled state
[  227.915877] device e-auth-usr entered promiscuous mode
[  227.920655] br-user: port 9(e-auth-usr) entered blocking state
[  227.925456] br-user: port 9(e-auth-usr) entered forwarding state
[  227.958855] br-wifi: port 8(e-auth-wifi) entered blocking state
[  227.964200] br-wifi: port 8(e-auth-wifi) entered disabled state
[  227.969659] device e-auth-wifi entered promiscuous mode
[  227.976137] br-wifi: port 8(e-auth-wifi) entered blocking state
[  227.976147] br-wifi: port 8(e-auth-wifi) entered forwarding state
[  227.997688] br-service: port 9(e-auth-srv) entered blocking state
[  228.003467] br-service: port 9(e-auth-srv) entered disabled state
[  228.003836] device e-auth-srv entered promiscuous mode
[  228.004485] br-service: port 9(e-auth-srv) entered blocking state
[  228.004494] br-service: port 9(e-auth-srv) entered forwarding state
[  228.031499] br-factory: port 8(e-auth-fact) entered blocking state
[  228.031508] br-factory: port 8(e-auth-fact) entered disabled state
[  228.031877] device e-auth-fact entered promiscuous mode
[  228.032565] br-factory: port 8(e-auth-fact) entered blocking state
[  228.032574] br-factory: port 8(e-auth-fact) entered forwarding state
[  228.391010] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[  228.419082] br-admin: port 9(e-auth-adm) entered disabled state
[  228.424259] br-user: port 9(e-auth-usr) entered disabled state
[  228.430530] br-wifi: port 8(e-auth-wifi) entered disabled state
[  228.438446] br-service: port 9(e-auth-srv) entered disabled state
[  228.444197] br-factory: port 8(e-auth-fact) entered disabled state
[  228.471595] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  228.503984] eth-admin: renamed from veth00HJ85
[  228.561574] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  228.567714] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-adm: link becomes ready
[  228.574139] br-admin: port 9(e-auth-adm) entered blocking state
[  228.579572] br-admin: port 9(e-auth-adm) entered forwarding state
[  228.595762] eth-user: renamed from vethTO7IWN
[  228.641728] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  228.648311] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-usr: link becomes ready
[  228.654180] br-user: port 9(e-auth-usr) entered blocking state
[  228.659547] br-user: port 9(e-auth-usr) entered forwarding state
[  228.674945] eth-wifi: renamed from veth4Q2AAL
[  228.723437] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  228.730007] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-wifi: link becomes ready
[  228.736002] br-wifi: port 8(e-auth-wifi) entered blocking state
[  228.741423] br-wifi: port 8(e-auth-wifi) entered forwarding state
[  228.759243] eth-srv: renamed from vethBD89W1
[  228.840539] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  228.846412] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-srv: link becomes ready
[  228.853132] br-service: port 9(e-auth-srv) entered blocking state
[  228.858540] br-service: port 9(e-auth-srv) entered forwarding state
[  228.875560] eth-fact: renamed from vethK08J5D
[  228.936913] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  228.943522] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-fact: link becomes ready
[  228.949539] br-factory: port 8(e-auth-fact) entered blocking state
[  228.955178] br-factory: port 8(e-auth-fact) entered forwarding state
[  229.052917] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  229.141197] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  229.177326] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[  229.238835] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[  229.323631] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[  229.386886] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[  229.437164] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[  229.490715] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[  229.666605] br-admin: port 10(e-nfs-adm) entered blocking state
[  229.671175] br-admin: port 10(e-nfs-adm) entered disabled state
[  229.671824] device e-nfs-adm entered promiscuous mode
[  229.704423] br-user: port 10(e-nfs-usr) entered blocking state
[  229.708899] br-user: port 10(e-nfs-usr) entered disabled state
[  229.709701] device e-nfs-usr entered promiscuous mode
[  229.720985] br-user: port 10(e-nfs-usr) entered blocking state
[  229.725520] br-user: port 10(e-nfs-usr) entered forwarding state
[  229.748242] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  229.755866] br-wifi: port 9(e-nfs-wifi) entered disabled state
[  229.761052] device e-nfs-wifi entered promiscuous mode
[  229.772479] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  229.777086] br-wifi: port 9(e-nfs-wifi) entered forwarding state
[  229.801461] br-service: port 10(e-nfs-srv) entered blocking state
[  229.806416] br-service: port 10(e-nfs-srv) entered disabled state
[  229.813033] device e-nfs-srv entered promiscuous mode
[  229.818490] br-service: port 10(e-nfs-srv) entered blocking state
[  229.823426] br-service: port 10(e-nfs-srv) entered forwarding state
[  229.850887] br-factory: port 9(e-nfs-fact) entered blocking state
[  229.855800] br-factory: port 9(e-nfs-fact) entered disabled state
[  229.856229] device e-nfs-fact entered promiscuous mode
[  229.869872] br-factory: port 9(e-nfs-fact) entered blocking state
[  229.869885] br-factory: port 9(e-nfs-fact) entered forwarding state
[  230.173199] EXT4-fs (dm-18): couldn't mount as ext3 due to feature incompatibilities
[  230.175191] EXT4-fs (dm-10): re-mounted. Opts: (null)
[  230.203349] eth-admin: renamed from vethP2USIV
[  230.248296] eth-user: renamed from vethCOACB7
[  230.287875] br-user: port 10(e-nfs-usr) entered disabled state
[  230.292833] br-wifi: port 9(e-nfs-wifi) entered disabled state
[  230.299494] br-service: port 10(e-nfs-srv) entered disabled state
[  230.305720] br-factory: port 9(e-nfs-fact) entered disabled state
[  230.311156] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  230.318539] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-adm: link becomes ready
[  230.324055] br-admin: port 10(e-nfs-adm) entered blocking state
[  230.329700] br-admin: port 10(e-nfs-adm) entered forwarding state
[  230.347133] eth-wifi: renamed from vethGFAGFO
[  230.387914] eth-srv: renamed from veth4Y18EG
[  230.441919] EXT4-fs (dm-57): re-mounted. Opts: (null)
[  230.471955] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-usr: link becomes ready
[  230.477560] br-user: port 10(e-nfs-usr) entered blocking state
[  230.483054] br-user: port 10(e-nfs-usr) entered forwarding state
[  230.493985] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-wifi: link becomes ready
[  230.505171] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  230.509587] br-wifi: port 9(e-nfs-wifi) entered forwarding state
[  230.526131] eth-fact: renamed from vethIIBYVI
[  230.572823] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-srv: link becomes ready
[  230.579537] br-service: port 10(e-nfs-srv) entered blocking state
[  230.584188] br-service: port 10(e-nfs-srv) entered forwarding state
[  230.594180] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-fact: link becomes ready
[  230.607109] br-factory: port 9(e-nfs-fact) entered blocking state
[  230.611772] br-factory: port 9(e-nfs-fact) entered forwarding state
[  231.520467] EXT4-fs (dm-27): recovery complete
[  231.613172] br-admin: port 11(e-bust-adm) entered blocking state
[  231.617749] br-admin: port 11(e-bust-adm) entered disabled state
[  231.619136] device e-bust-adm entered promiscuous mode
[  231.651167] br-user: port 11(e-bust-usr) entered blocking state
[  231.655672] br-user: port 11(e-bust-usr) entered disabled state
[  231.656289] device e-bust-usr entered promiscuous mode
[  231.667966] br-user: port 11(e-bust-usr) entered blocking state
[  231.667975] br-user: port 11(e-bust-usr) entered forwarding state
[  231.688880] br-service: port 11(e-bust-srv) entered blocking state
[  231.693647] br-service: port 11(e-bust-srv) entered disabled state
[  231.696017] device e-bust-srv entered promiscuous mode
[  231.705569] br-service: port 11(e-bust-srv) entered blocking state
[  231.711064] br-service: port 11(e-bust-srv) entered forwarding state
[  231.740435] br-factory: port 10(e-bust-fact) entered blocking state
[  231.740444] br-factory: port 10(e-bust-fact) entered disabled state
[  231.740832] device e-bust-fact entered promiscuous mode
[  231.763584] br-factory: port 10(e-bust-fact) entered blocking state
[  231.768623] br-factory: port 10(e-bust-fact) entered forwarding state
[  232.022920] EXT4-fs (dm-47): couldn't mount as ext3 due to feature incompatibilities
[  232.187482] eth-admin: renamed from vethB82HBU
[  232.247877] br-user: port 11(e-bust-usr) entered disabled state
[  232.252988] br-service: port 11(e-bust-srv) entered disabled state
[  232.260629] br-factory: port 10(e-bust-fact) entered disabled state
[  232.266103] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  232.273106] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-adm: link becomes ready
[  232.283510] br-admin: port 11(e-bust-adm) entered blocking state
[  232.288096] br-admin: port 11(e-bust-adm) entered forwarding state
[  232.298387] eth-user: renamed from vethCA3WFB
[  232.419248] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-usr: link becomes ready
[  232.425165] br-user: port 11(e-bust-usr) entered blocking state
[  232.430539] br-user: port 11(e-bust-usr) entered forwarding state
[  232.438145] eth-srv: renamed from vethIB7CE9
[  232.514744] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-srv: link becomes ready
[  232.520482] br-service: port 11(e-bust-srv) entered blocking state
[  232.526293] br-service: port 11(e-bust-srv) entered forwarding state
[  232.535703] eth-fact: renamed from vethTYS5UV
[  232.673167] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-fact: link becomes ready
[  232.679079] br-factory: port 10(e-bust-fact) entered blocking state
[  232.684878] br-factory: port 10(e-bust-fact) entered forwarding state
[  233.081453] EXT4-fs (dm-19): re-mounted. Opts: (null)
[  233.102440] br-admin: port 12(e-ownc-adm) entered blocking state
[  233.107174] br-admin: port 12(e-ownc-adm) entered disabled state
[  233.107592] device e-ownc-adm entered promiscuous mode
[  233.118858] br-admin: port 12(e-ownc-adm) entered blocking state
[  233.124110] br-admin: port 12(e-ownc-adm) entered forwarding state
[  233.148564] br-user: port 12(e-ownc-usr) entered blocking state
[  233.153102] br-user: port 12(e-ownc-usr) entered disabled state
[  233.153428] device e-ownc-usr entered promiscuous mode
[  233.164735] br-user: port 12(e-ownc-usr) entered blocking state
[  233.169966] br-user: port 12(e-ownc-usr) entered forwarding state
[  233.193918] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  233.198517] br-wifi: port 10(e-ownc-wifi) entered disabled state
[  233.199292] device e-ownc-wifi entered promiscuous mode
[  233.210426] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  233.210435] br-wifi: port 10(e-ownc-wifi) entered forwarding state
[  233.245431] br-service: port 12(e-ownc-srv) entered blocking state
[  233.245442] br-service: port 12(e-ownc-srv) entered disabled state
[  233.258153] device e-ownc-srv entered promiscuous mode
[  233.259179] br-service: port 12(e-ownc-srv) entered blocking state
[  233.268033] br-service: port 12(e-ownc-srv) entered forwarding state
[  233.294584] br-factory: port 11(e-ownc-fact) entered blocking state
[  233.301021] br-factory: port 11(e-ownc-fact) entered disabled state
[  233.306904] device e-ownc-fact entered promiscuous mode
[  233.312013] br-factory: port 11(e-ownc-fact) entered blocking state
[  233.317316] br-factory: port 11(e-ownc-fact) entered forwarding state
[  233.700152] br-admin: port 12(e-ownc-adm) entered disabled state
[  233.707016] br-user: port 12(e-ownc-usr) entered disabled state
[  233.712676] br-wifi: port 10(e-ownc-wifi) entered disabled state
[  233.722473] br-service: port 12(e-ownc-srv) entered disabled state
[  233.732805] br-factory: port 11(e-ownc-fact) entered disabled state
[  233.762899] EXT4-fs (dm-65): couldn't mount as ext3 due to feature incompatibilities
[  233.831857] eth-admin: renamed from vethYNPUMF
[  233.912367] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  233.918349] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-adm: link becomes ready
[  233.925057] br-admin: port 12(e-ownc-adm) entered blocking state
[  233.930436] br-admin: port 12(e-ownc-adm) entered forwarding state
[  233.947756] eth-user: renamed from vethQWDCCA
[  233.993965] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  233.999770] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-usr: link becomes ready
[  234.007370] br-user: port 12(e-ownc-usr) entered blocking state
[  234.011942] br-user: port 12(e-ownc-usr) entered forwarding state
[  234.024628] eth-wifi: renamed from vethB2CCH3
[  234.085010] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  234.091651] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-wifi: link becomes ready
[  234.098804] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  234.103456] br-wifi: port 10(e-ownc-wifi) entered forwarding state
[  234.115182] eth-srv: renamed from vethY88JEH
[  234.167001] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  234.172816] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-srv: link becomes ready
[  234.180385] br-service: port 12(e-ownc-srv) entered blocking state
[  234.185211] br-service: port 12(e-ownc-srv) entered forwarding state
[  234.201160] eth-fact: renamed from vethMQ88V5
[  234.249182] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  234.255099] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-fact: link becomes ready
[  234.263963] br-factory: port 11(e-ownc-fact) entered blocking state
[  234.268859] br-factory: port 11(e-ownc-fact) entered forwarding state
[  234.900048] br-admin: port 13(e-vpn-adm) entered blocking state
[  234.904549] br-admin: port 13(e-vpn-adm) entered disabled state
[  234.904962] device e-vpn-adm entered promiscuous mode
[  234.928503] br-user: port 13(e-vpn-usr) entered blocking state
[  234.933149] br-user: port 13(e-vpn-usr) entered disabled state
[  234.939830] device e-vpn-usr entered promiscuous mode
[  234.941183] br-user: port 13(e-vpn-usr) entered blocking state
[  234.949557] br-user: port 13(e-vpn-usr) entered forwarding state
[  234.981268] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  234.986177] br-vpn: port 7(e-vpn-vpn) entered disabled state
[  234.991529] device e-vpn-vpn entered promiscuous mode
[  235.001548] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  235.005864] br-vpn: port 7(e-vpn-vpn) entered forwarding state
[  235.035951] br-service: port 13(e-vpn-srv) entered blocking state
[  235.040937] br-service: port 13(e-vpn-srv) entered disabled state
[  235.041375] device e-vpn-srv entered promiscuous mode
[  235.054175] br-service: port 13(e-vpn-srv) entered blocking state
[  235.059148] br-service: port 13(e-vpn-srv) entered forwarding state
[  235.104899] br-factory: port 12(e-vpn-fact) entered blocking state
[  235.111032] br-factory: port 12(e-vpn-fact) entered disabled state
[  235.117608] device e-vpn-fact entered promiscuous mode
[  235.119298] br-factory: port 12(e-vpn-fact) entered blocking state
[  235.128161] br-factory: port 12(e-vpn-fact) entered forwarding state
[  235.401786] EXT4-fs (dm-1): re-mounted. Opts: (null)
[  235.439704] EXT4-fs (dm-103): couldn't mount as ext3 due to feature incompatibilities
[  235.496518] eth-admin: renamed from veth75TSTR
[  235.545335] eth-user: renamed from vethJMM5J0
[  235.637183] br-user: port 13(e-vpn-usr) entered disabled state
[  235.643485] br-vpn: port 7(e-vpn-vpn) entered disabled state
[  235.648969] br-service: port 13(e-vpn-srv) entered disabled state
[  235.654975] br-factory: port 12(e-vpn-fact) entered disabled state
[  235.660634] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  235.667238] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-adm: link becomes ready
[  235.675452] br-admin: port 13(e-vpn-adm) entered blocking state
[  235.679990] br-admin: port 13(e-vpn-adm) entered forwarding state
[  235.700041] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-usr: link becomes ready
[  235.705922] br-user: port 13(e-vpn-usr) entered blocking state
[  235.711198] br-user: port 13(e-vpn-usr) entered forwarding state
[  235.724010] eth-vpn: renamed from veth6CUYXP
[  235.791992] eth-srv: renamed from veth48EFHO
[  235.867770] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-vpn: link becomes ready
[  235.869599] EXT4-fs (dm-48): re-mounted. Opts: (null)
[  235.873568] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  235.883740] br-vpn: port 7(e-vpn-vpn) entered forwarding state
[  235.903444] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-srv: link becomes ready
[  235.909986] br-service: port 13(e-vpn-srv) entered blocking state
[  235.914844] br-service: port 13(e-vpn-srv) entered forwarding state
[  235.932826] eth-fact: renamed from vethCFOCYA
[  235.999784] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  236.007947] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-fact: link becomes ready
[  236.015061] br-factory: port 12(e-vpn-fact) entered blocking state
[  236.019881] br-factory: port 12(e-vpn-fact) entered forwarding state
[  236.491152] br-admin: port 14(e-ssh-adm) entered blocking state
[  236.495921] br-admin: port 14(e-ssh-adm) entered disabled state
[  236.501929] device e-ssh-adm entered promiscuous mode
[  236.507210] br-admin: port 14(e-ssh-adm) entered blocking state
[  236.512476] br-admin: port 14(e-ssh-adm) entered forwarding state
[  236.547700] br-user: port 14(e-ssh-usr) entered blocking state
[  236.552110] br-user: port 14(e-ssh-usr) entered disabled state
[  236.559866] device e-ssh-usr entered promiscuous mode
[  236.564568] br-user: port 14(e-ssh-usr) entered blocking state
[  236.569304] br-user: port 14(e-ssh-usr) entered forwarding state
[  236.605531] br-service: port 14(e-ssh-srv) entered blocking state
[  236.610261] br-service: port 14(e-ssh-srv) entered disabled state
[  236.610980] device e-ssh-srv entered promiscuous mode
[  236.623558] br-service: port 14(e-ssh-srv) entered blocking state
[  236.628237] br-service: port 14(e-ssh-srv) entered forwarding state
[  236.660547] br-factory: port 13(e-ssh-fact) entered blocking state
[  236.665307] br-factory: port 13(e-ssh-fact) entered disabled state
[  236.672469] device e-ssh-fact entered promiscuous mode
[  236.677595] br-factory: port 13(e-ssh-fact) entered blocking state
[  236.682726] br-factory: port 13(e-ssh-fact) entered forwarding state
[  237.008032] br-admin: port 14(e-ssh-adm) entered disabled state
[  237.014333] br-user: port 14(e-ssh-usr) entered disabled state
[  237.021485] br-service: port 14(e-ssh-srv) entered disabled state
[  237.028236] br-factory: port 13(e-ssh-fact) entered disabled state
[  237.058574] EXT4-fs (dm-112): couldn't mount as ext3 due to feature incompatibilities
[  237.124787] eth-admin: renamed from vethE0L03Y
[  237.169199] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  237.175811] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-adm: link becomes ready
[  237.182809] br-admin: port 14(e-ssh-adm) entered blocking state
[  237.187365] br-admin: port 14(e-ssh-adm) entered forwarding state
[  237.200258] eth-user: renamed from vethO6HK25
[  237.315331] eth-srv: renamed from veth0TW2AL
[  237.404652] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  237.411317] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-usr: link becomes ready
[  237.417240] br-user: port 14(e-ssh-usr) entered blocking state
[  237.422450] br-user: port 14(e-ssh-usr) entered forwarding state
[  237.439418] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  237.445064] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-srv: link becomes ready
[  237.453498] br-service: port 14(e-ssh-srv) entered blocking state
[  237.458266] br-service: port 14(e-ssh-srv) entered forwarding state
[  237.470731] eth-fact: renamed from veth031LC8
[  237.528105] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  237.533932] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-fact: link becomes ready
[  237.541660] br-factory: port 13(e-ssh-fact) entered blocking state
[  237.546468] br-factory: port 13(e-ssh-fact) entered forwarding state
[  237.579743] EXT4-fs (dm-66): re-mounted. Opts: (null)
[  238.024515] br-admin: port 15(s-stre-adm) entered blocking state
[  238.029101] br-admin: port 15(s-stre-adm) entered disabled state
[  238.035685] device s-stre-adm entered promiscuous mode
[  238.062899] br-user: port 15(s-stre-usr) entered blocking state
[  238.067700] br-user: port 15(s-stre-usr) entered disabled state
[  238.068080] device s-stre-usr entered promiscuous mode
[  238.068714] br-user: port 15(s-stre-usr) entered blocking state
[  238.068723] br-user: port 15(s-stre-usr) entered forwarding state
[  238.090858] br-service: port 15(s-stre-srv) entered blocking state
[  238.097108] br-service: port 15(s-stre-srv) entered disabled state
[  238.097367] device s-stre-srv entered promiscuous mode
[  238.097818] br-service: port 15(s-stre-srv) entered blocking state
[  238.097824] br-service: port 15(s-stre-srv) entered forwarding state
[  238.122639] br-factory: port 14(s-stre-fact) entered blocking state
[  238.129813] br-factory: port 14(s-stre-fact) entered disabled state
[  238.130135] device s-stre-fact entered promiscuous mode
[  238.130985] br-factory: port 14(s-stre-fact) entered blocking state
[  238.130993] br-factory: port 14(s-stre-fact) entered forwarding state
[  238.567957] EXT4-fs (dm-28): couldn't mount as ext3 due to feature incompatibilities
[  238.651381] eth-admin: renamed from vethKBP7NN
[  238.709185] br-user: port 15(s-stre-usr) entered disabled state
[  238.716228] br-service: port 15(s-stre-srv) entered disabled state
[  238.721651] br-factory: port 14(s-stre-fact) entered disabled state
[  238.744306] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  238.750042] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-adm: link becomes ready
[  238.758644] br-admin: port 15(s-stre-adm) entered blocking state
[  238.763237] br-admin: port 15(s-stre-adm) entered forwarding state
[  238.787818] eth-user: renamed from vethX0F5W6
[  238.859639] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-usr: link becomes ready
[  238.865494] br-user: port 15(s-stre-usr) entered blocking state
[  238.865501] br-user: port 15(s-stre-usr) entered forwarding state
[  238.867218] eth-srv: renamed from vethC8KYFP
[  238.949892] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-srv: link becomes ready
[  238.955752] br-service: port 15(s-stre-srv) entered blocking state
[  238.961427] br-service: port 15(s-stre-srv) entered forwarding state
[  238.984974] eth-fact: renamed from vethIGHPMS
[  239.059245] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  239.066543] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-fact: link becomes ready
[  239.072444] br-factory: port 14(s-stre-fact) entered blocking state
[  239.078260] br-factory: port 14(s-stre-fact) entered forwarding state
[  240.149837] EXT4-fs (dm-29): re-mounted. Opts: (null)
[  240.784117] NFSD: attempt to initialize umh client tracking in a container ignored.
[  240.806665] NFSD: attempt to initialize legacy client tracking in a container ignored.
[  240.819252] NFSD: Unable to initialize client recovery tracking! (-22)
[  240.824354] NFSD: starting 90-second grace period (net f000092d)

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: [  241.189396] EXT4-fs (dm-104): re-mounted. Opts: (null)
[  241.301125] EXT4-fs (dm-113): re-mounted. Opts: (null)
[  254.938523] br-wifi: port 1(eth-wifi) entered blocking state
[  254.954326] br-wifi: port 1(eth-wifi) entered disabled state
[  254.975127] device eth-wifi entered promiscuous mode
[  255.109550] br-wifi: port 1(eth-wifi) entered blocking state
[  255.113830] br-wifi: port 1(eth-wifi) entered forwarding state
[  258.589636] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  258.607787] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  258.612966] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[  258.621479] cfg80211: failed to load regulatory.db
[  513.632272] Alignment trap: not handling instruction e8503f00 at [<b6e95696>]
[  513.638306] Unhandled fault: alignment exception (0x001) at 0x00d9fffe
[  513.644728] pgd = d6fdc77f
[  513.647215] [00d9fffe] *pgd=a0cf8835
[  662.550720] Alignment trap: not handling instruction e8503f00 at [<b6ea6696>]
[  662.556465] Unhandled fault: alignment exception (0x001) at 0x01eb110f
[  662.562976] pgd = 5a289345
[  662.566194] [01eb110f] *pgd=9243b835
[  681.454674] Alignment trap: not handling instruction e8503f00 at [<b6f08696>]
[  681.460381] Unhandled fault: alignment exception (0x011) at 0x009a2cff
[  681.466869] pgd = fe0c8ea7
[  681.469550] [009a2cff] *pgd=b4e8a835
[  700.270874] Alignment trap: not handling instruction e8503f00 at [<b6ece696>]
[  700.276650] Unhandled fault: alignment exception (0x011) at 0x009dcc9f
[  700.283220] pgd = cbb7c4a7
[  700.285824] [009dcc9f] *pgd=b4f4d835
[  743.598846] Alignment trap: not handling instruction e8503f00 at [<b6edc696>]
[  743.604599] Unhandled fault: alignment exception (0x001) at 0x01a55c1f
[  743.611660] pgd = 5ed6d8bd
[  743.613848] [01a55c1f] *pgd=a0e2c835
[  744.302918] Alignment trap: not handling instruction e8503f00 at [<b6ed9696>]
[  744.308655] Unhandled fault: alignment exception (0x001) at 0x01076c1f
[  744.315230] pgd = 2fa4e4dc
[  744.317843] [01076c1f] *pgd=a0dfb835
[ 1557.972729] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37
[ 2245.475383] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: root
Password: 
Last login: Sat Jan  1 00:01:33 UTC 2000 on ttySAC2
/etc/update-motd.d/30-armbian-sysinfo: line 44: bc: command not found
  ___      _           _     _  __  ___   _ _  _   
 / _ \  __| |_ __ ___ (_) __| | \ \/ / | | | || |  
| | | |/ _` | '__/ _ \| |/ _` |  \  /| | | | || |_ 
| |_| | (_| | | | (_) | | (_| |  /  \| |_| |__   _|
 \___/ \__,_|_|  \___/|_|\__,_| /_/\_\\___/   |_|  
                                                   

Welcome to ARMBIAN 5.72 stable Debian GNU/Linux 9 (stretch) 5.0.0   
System load:   2.05 2.20 3.14  	Up time:       43 min		
Memory usage:  26 % of 1993MB 	IP:            192.168.57.65 192.168.54.65 192.168.56.65
CPU temp:      44°C           	
Usage of /:    20% of 15G    	

[ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ]


root@srv-hc1-110:~# lsmod
Module                  Size  Used by
nfnetlink_log          20480  6
nfnetlink              16384  6 nfnetlink_log
xt_NFLOG               16384  1
xt_nat                 16384  28
xt_comment             16384  29
xt_limit               16384  29
iptable_nat            16384  1
nf_nat_ipv4            16384  1 iptable_nat
nf_nat                 28672  2 xt_nat,nf_nat_ipv4
nf_conntrack          110592  3 xt_nat,nf_nat_ipv4,nf_nat
nf_defrag_ipv6         20480  1 nf_conntrack
nf_defrag_ipv4         16384  1 nf_conntrack
libcrc32c              16384  2 nf_conntrack,nf_nat
cfg80211              552960  0
rfkill                 20480  1 cfg80211
cpufreq_conservative    16384  0
cpufreq_userspace      16384  0
cpufreq_powersave      16384  0
iptable_filter         16384  0
ip_tables              24576  22 iptable_filter,iptable_nat
veth                   24576  0
bridge                135168  0
ipv6                  401408  413 bridge
nfsd                  278528  19
8021q                  24576  0
garp                   16384  1 8021q
mrp                    20480  1 8021q
stp                    16384  2 garp,bridge
llc                    16384  3 garp,bridge,stp
uas                    20480  20


- Jean Marc :) -

User avatar
tobetter
Posts: 3655
Joined: Mon Feb 25, 2013 10:55 am
languages_spoken: Korean, English
ODROIDs: X, X2, U2, U3, XU3, C1
Location: Paju, South Korea
Has thanked: 26 times
Been thanked: 114 times
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by tobetter » Fri Mar 08, 2019 2:09 am

My custom kernel 5.0.0 does not show the error, here is my kernel boot log and running my Debian Stretch.
https://pastebin.com/JeHw8931

Can you share your kernel config?

jeanmarc
Posts: 11
Joined: Tue Mar 05, 2019 9:02 pm
languages_spoken: english
ODROIDs: 2 Odroid HC1 boards with 250 GB SSD disk with standard kernel.org kernel Odroid N2 board
Location: near Paris
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by jeanmarc » Fri Mar 08, 2019 5:53 am

Hi Tobetter,
Many thanks for the boot log of your kernel.
It seems you don't have any disc connected on sata disc ?
exact ?
Please find below my kernel config

Code: Select all


#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 5.0.0 Kernel Configuration
#

#
# Compiler: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=60300
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_INITRAMFS_FORCE is not set
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_ACTIONS is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_ARTPEC is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_DIGICOLOR is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_S5P_DEV_MFC=y
CONFIG_ARCH_EXYNOS3=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_ARCH_EXYNOS5=y

#
# EXYNOS SoCs
#
CONFIG_SOC_EXYNOS3250=y
CONFIG_CPU_EXYNOS4210=y
CONFIG_SOC_EXYNOS4412=y
CONFIG_SOC_EXYNOS5250=y
CONFIG_SOC_EXYNOS5260=y
CONFIG_SOC_EXYNOS5410=y
CONFIG_SOC_EXYNOS5420=y
CONFIG_SOC_EXYNOS5800=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_EXYNOS_CPU_SUSPEND=y
CONFIG_PLAT_SAMSUNG=y

#
# Samsung Common options
#

#
# Boot options
#

#
# Power management
#
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MEDIATEK is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_NPCM is not set

#
# TI OMAP/AM/DM/DRA Family
#
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_RDA is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_STM32 is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_TANGO is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_SPECTRE=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_KUSER_HELPERS=y
CONFIG_VDSO=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
# CONFIG_CACHE_L2X0_PMU is not set
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_DEBUG_ALIGN_RODATA=y
# CONFIG_ARM_ERRATA_430973 is not set
CONFIG_ARM_ERRATA_643719=y
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_798181 is not set
# CONFIG_ARM_ERRATA_773022 is not set
# CONFIG_ARM_ERRATA_818325_852422 is not set
# CONFIG_ARM_ERRATA_821420 is not set
# CONFIG_ARM_ERRATA_825619 is not set
# CONFIG_ARM_ERRATA_852421 is not set
# CONFIG_ARM_ERRATA_852423 is not set

#
# Bus support
#

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_MCPM=y
CONFIG_BIG_LITTLE=y
# CONFIG_BL_SWITCHER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=512
CONFIG_HZ_FIXED=0
# CONFIG_HZ_100 is not set
# CONFIG_HZ_200 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_CPU_SW_DOMAIN_PAN=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ARM_MODULE_PLTS is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
CONFIG_SECCOMP=y
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
CONFIG_CMDLINE="s5p_mfc.mem=16M"
# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_CMDLINE_EXTEND=y
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
# CONFIG_EFI is not set

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y

#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_CPUIDLE is not set
# CONFIG_ARM_BIG_LITTLE_CPUIDLE is not set
CONFIG_ARM_EXYNOS_CPUIDLE=y
CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y

#
# Firmware Drivers
#
# CONFIG_INTEL_STRATIX10_SERVICE is not set
CONFIG_HAVE_ARM_SMCCC=y
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA1_ARM_NEON=m
# CONFIG_CRYPTO_SHA1_ARM_CE is not set
# CONFIG_CRYPTO_SHA2_ARM_CE is not set
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_AES_ARM_CE=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
CONFIG_CRYPTO_CRC32_ARM_CE=m
CONFIG_CRYPTO_CHACHA20_NEON=m
# CONFIG_CRYPTO_NHPOLY1305_NEON is not set
# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_REFCOUNT_FULL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_ELF_FDPIC is not set
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

#
# Memory Management options
#
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_SET is not set
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=y
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_DEFRAG_IPV6=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
# CONFIG_NF_TABLES_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUGFS=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_TI_HECC is not set
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_RCAR_CANFD is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
CONFIG_CAN_MCP251X=m

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not set
CONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
CONFIG_BT_LEDS=y
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=m
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_TRF7970A is not set
# CONFIG_NFC_SIM is not set
# CONFIG_NFC_PORT100 is not set
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_ST95HF is not set
# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=128
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_GENERIC_ARCH_TOPOLOGY=y

#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
CONFIG_ARM_CCI400_PORT_CTRL=y
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_RBD is not set

#
# NVME Support
#
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_MISC_RTSX_USB is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_IFB is not set
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
# CONFIG_IPVTAP is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_NET_VENDOR_CIRRUS is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MSCC_MIIM is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_ASIX_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_MICROCHIP_PHY=m
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
# CONFIG_ATH6KL is not set
CONFIG_AR5523=m
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
# CONFIG_ATH10K_SDIO is not set
# CONFIG_ATH10K_USB is not set
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
# CONFIG_BRCMSMAC is not set
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
# CONFIG_BRCMFMAC_SDIO is not set
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_SDIO is not set
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_MESH is not set
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
# CONFIG_MWIFIEX_SDIO is not set
CONFIG_MWIFIEX_USB=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
# CONFIG_MT76x0U is not set
# CONFIG_MT76x2U is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8XXXU=m
# CONFIG_RTL8XXXU_UNTESTED is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_MAC80211_HWSIM is not set
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_VIRT_WIFI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_SAMSUNG=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=m
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MMS114=m
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_AMBAKMI is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_EXYNOS=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_DEMUX_PINCTRL is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
CONFIG_HAVE_S3C2410_I2C=y
CONFIG_I2C_S3C2410=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I3C is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_GPIO=y
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_ROCKCHIP is not set
CONFIG_SPI_S3C64XX=m
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_ZEVIO is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#
# CONFIG_HTC_EGPIO is not set
# CONFIG_GPIO_WM8994 is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

#
# USB GPIO expanders
#
CONFIG_W1=m

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_DS28E17 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_VERSATILE is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_LEGO_EV3 is not set
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_PWM_FAN=y
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_QORIQ_THERMAL is not set

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_FTWDT010_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_CHARDEV is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=m
# CONFIG_MFD_ROHM_BD718XX is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MCP16502 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_IR_IMON_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=y
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
# CONFIG_RC_XBOX_DVD is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
# CONFIG_MEDIA_CONTROLLER_REQUEST_API is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=y
# CONFIG_V4L2_FLASH_LED_CLASS is not set
CONFIG_V4L2_FWNODE=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=y
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_AS102=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m

#
# USB HDMI CEC adapters
#
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CADENCE is not set
# CONFIG_VIDEO_ASPEED is not set
# CONFIG_VIDEO_MUX is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_EXYNOS4_IS_COMMON=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
# CONFIG_VIDEO_XILINX is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
# CONFIG_VIDEO_SH_VEU is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIMC is not set
CONFIG_VIDEO_VIVID=m
# CONFIG_VIDEO_VIVID_CEC is not set
CONFIG_VIDEO_VIVID_MAX_DEVS=64
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
CONFIG_DVB_PLATFORM_DRIVERS=y
# CONFIG_DVB_C8SECTPFE is not set
CONFIG_CEC_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CROS_EC_CEC is not set
# CONFIG_CEC_GPIO is not set
CONFIG_VIDEO_SAMSUNG_S5P_CEC=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_VIDEO_V4L2_TPG=m

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SONY_BTF_MPX=m

#
# RDS decoders
#

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#

#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_MT9V011=m

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_SP2=m

#
# Tools to develop new frontends
#

#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_EXYNOS=y

#
# CRTCs
#
# CONFIG_DRM_EXYNOS_FIMD is not set
# CONFIG_DRM_EXYNOS5433_DECON is not set
# CONFIG_DRM_EXYNOS7_DECON is not set
CONFIG_DRM_EXYNOS_MIXER=y
# CONFIG_DRM_EXYNOS_VIDI is not set

#
# Encoders and Bridges
#
CONFIG_DRM_EXYNOS_HDMI=y

#
# Sub-drivers
#
CONFIG_DRM_EXYNOS_G2D=y
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
CONFIG_DRM_EXYNOS_ROTATOR=y
# CONFIG_DRM_EXYNOS_SCALER is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_ARMADA is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_OMAP is not set
# CONFIG_DRM_TILCDC is not set
# CONFIG_DRM_FSL_DCU is not set
# CONFIG_DRM_STM is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_LVDS is not set
CONFIG_DRM_PANEL_SIMPLE=y
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_LVDS_ENCODER is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_STI is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_TVE200 is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# HD-Audio
#
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_ARM=y
# CONFIG_SND_ARMAACI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SAMSUNG_PCM=y
CONFIG_SND_SAMSUNG_SPDIF=m
CONFIG_SND_SAMSUNG_I2S=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
CONFIG_SND_SOC_SMDK_WM8994_PCM=m
CONFIG_SND_SOC_SNOW=m
CONFIG_SND_SOC_ODROID=y
CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631=m

#
# STMicroelectronics STM32 SOC audio support
#
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# CONFIG_ZX_TDM is not set
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_WM_HUBS=m
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU1761_I2C is not set
# CONFIG_SND_SOC_ADAU1761_SPI is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_AK5558 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_BD28623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
# CONFIG_SND_SOC_CS35L35 is not set
# CONFIG_SND_SOC_CS42L42 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
# CONFIG_SND_SOC_DMIC is not set
CONFIG_SND_SOC_HDMI_CODEC=y
# CONFIG_SND_SOC_ES7134 is not set
# CONFIG_SND_SOC_ES7241 is not set
# CONFIG_SND_SOC_ES8316 is not set
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_ES8328_SPI is not set
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98095=m
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9867 is not set
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98373 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1789_I2C is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM186X_I2C is not set
# CONFIG_SND_SOC_PCM186X_SPI is not set
# CONFIG_SND_SOC_PCM3060_I2C is not set
# CONFIG_SND_SOC_PCM3060_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RT5616 is not set
CONFIG_SND_SOC_RT5631=m
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
CONFIG_SND_SOC_SPDIF=y
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
# CONFIG_SND_SOC_TLV320AIC3X is not set
# CONFIG_SND_SOC_TS3A227E is not set
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8524 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WM8994=m
# CONFIG_SND_SOC_ZX_AUD96P22 is not set
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_NAU8822 is not set
# CONFIG_SND_SOC_NAU8824 is not set
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SND_AUDIO_GRAPH_CARD is not set
# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
# CONFIG_HID_COUGAR is not set
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_GOOGLE_HAMMER is not set
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_EXYNOS=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_EXYNOS=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_SNP_UDC_PLAT is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=16
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_ARMMMCI is not set
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_S3C_DMA=y
# CONFIG_MMC_SPI is not set
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
# CONFIG_MMC_DW_BLUEFIELD is not set
CONFIG_MMC_DW_EXYNOS=y
# CONFIG_MMC_DW_HI3798CV200 is not set
# CONFIG_MMC_DW_K3 is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AAT1290 is not set
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_KTD2692 is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
CONFIG_RTC_DRV_S5M=y

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
# CONFIG_RTC_DRV_CROS_EC is not set

#
# on-CPU RTC drivers
#
CONFIG_HAVE_S3C_RTC=y
CONFIG_RTC_DRV_S3C=y
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_R7301 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_AMBA_PL08X is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_NBPFAXI_DMA is not set
CONFIG_PL330_DMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
CONFIG_PRISM2_USB=m
# CONFIG_COMEDI is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_VT6656 is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16240 is not set

#
# Analog to digital converters
#
# CONFIG_AD7606 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7280 is not set

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set

#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set

#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set

#
# Resolver to digital converters
#
# CONFIG_AD2S1210 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_I2C_BCM2048 is not set

#
# Android
#
# CONFIG_STAGING_BOARD is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
# CONFIG_FB_TFT_SH1106 is not set
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1305=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_FB_FLEX=m
CONFIG_FB_TFT_FBTFT_DEVICE=m
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
# CONFIG_PI433 is not set
# CONFIG_MTK_MMC is not set

#
# Gasket devices
#
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_EROFS_FS is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CROS_EC_I2C is not set
# CONFIG_CROS_EC_SPI is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_TIMER_SP804 is not set
CONFIG_CLKSRC_EXYNOS_MCT=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_EXYNOS_IOMMU=y
# CONFIG_EXYNOS_IOMMU_DEBUG is not set
# CONFIG_ARM_SMMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SOC_BRCMSTB is not set

#
# NXP/Freescale QorIQ SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_PMU=y
CONFIG_EXYNOS_PMU_ARM_DRIVERS=y
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_EXTCON_USBC_CROS_EC is not set
CONFIG_MEMORY=y
# CONFIG_ARM_PL172_MPMC is not set
CONFIG_PL353_SMC=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS_SROM=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
# CONFIG_IIO_CONFIGFS is not set
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL345_SPI is not set
# CONFIG_ADXL372_SPI is not set
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
# CONFIG_DMARD06 is not set
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_SCA3000 is not set
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set

#
# Analog to digital converters
#
# CONFIG_AD7124 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7766 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD7949 is not set
# CONFIG_AD799X is not set
# CONFIG_CC10001_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_EXYNOS_ADC=y
# CONFIG_HI8435 is not set
# CONFIG_HX711 is not set
# CONFIG_INA2XX_ADC is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
# CONFIG_LTC2497 is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX11100 is not set
# CONFIG_MAX1118 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
# CONFIG_MCP3911 is not set
# CONFIG_NAU7802 is not set
# CONFIG_SD_ADC_MODULATOR is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC12138 is not set
# CONFIG_TI_ADC108S102 is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS7950 is not set
# CONFIG_TI_ADS8688 is not set
# CONFIG_TI_TLC4541 is not set
# CONFIG_VF610_ADC is not set

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not set
# CONFIG_VZ89X is not set
# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set

#
# Hid Sensor IIO Common
#
# CONFIG_HID_SENSOR_IIO_COMMON is not set

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set

#
# Counters
#

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC1660 is not set
# CONFIG_LTC2632 is not set
# CONFIG_AD5686_SPI is not set
# CONFIG_AD5696_I2C is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5758 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD8801 is not set
# CONFIG_DPOT_DAC is not set
# CONFIG_DS4424 is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
# CONFIG_TI_DAC082S085 is not set
# CONFIG_TI_DAC5571 is not set
# CONFIG_TI_DAC7311 is not set
# CONFIG_VF610_DAC is not set

#
# IIO dummy driver
#

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
# CONFIG_HID_SENSOR_HUMIDITY is not set
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set

#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_INV_MPU6050_SPI is not set
# CONFIG_IIO_ST_LSM6DSX is not set

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM3605 is not set
CONFIG_CM36651=y
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_ISL29125 is not set
# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
# CONFIG_LTR501 is not set
# CONFIG_LV0104CS is not set
# CONFIG_MAX44000 is not set
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
# CONFIG_VEML6070 is not set
# CONFIG_VL6180 is not set
# CONFIG_ZOPT2201 is not set

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN_SPI is not set
# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_MMC35240 is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_SENSORS_RM3100_SPI is not set

#
# Multiplexers
#
# CONFIG_IIO_MUX is not set

#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set

#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set

#
# Digital potentiometers
#
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
# CONFIG_MCP4018 is not set
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
# CONFIG_MCP41010 is not set
# CONFIG_TPL0102 is not set

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HP03 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
# CONFIG_ZPA2326 is not set

#
# Lightning sensors
#
# CONFIG_AS3935 is not set

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_RFD77402 is not set
# CONFIG_SRF04 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set
# CONFIG_VL53L0X_I2C is not set

#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set

#
# Temperature sensors
#
# CONFIG_MAXIM_THERMOCOUPLE is not set
# CONFIG_HID_SENSOR_TEMP is not set
# CONFIG_MLX90614 is not set
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_CROS_EC is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_SAMSUNG=y

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_GIC_NON_BANKED=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_DP is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_CPCAP_USB is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
# CONFIG_PHY_EXYNOS_PCIE is not set
CONFIG_PHY_SAMSUNG_USB2=y
CONFIG_PHY_EXYNOS4210_USB2=y
CONFIG_PHY_EXYNOS4X12_USB2=y
CONFIG_PHY_EXYNOS5250_USB2=y
CONFIG_PHY_EXYNOS5_USBDRD=y
CONFIG_PHY_EXYNOS5250_SATA=y
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_ARM_CCI_PMU is not set
# CONFIG_ARM_CCN is not set
CONFIG_ARM_PMU=y
# CONFIG_RAS is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DAX=y
CONFIG_NVMEM=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_TEE is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FS_ENCRYPTION=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
# CONFIG_CRYPTO_ADIANTUM is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
CONFIG_CRYPTO_DEV_S5P=y
CONFIG_CRYPTO_DEV_EXYNOS_HASH=y
# CONFIG_CRYPTO_DEV_CCREE is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_DMA_REMAP=y
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_7x14=y
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER16x32 is not set
CONFIG_SG_POOL=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
# CONFIG_DEBUG_KERNEL is not set

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set

#
# Debug Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_INFO=y
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_BUGVERBOSE=y

#
# RCU Debugging
#
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_DEBUG_WX is not set
# CONFIG_UNWINDER_FRAME_POINTER is not set
CONFIG_UNWINDER_ARM=y
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_CORESIGHT is not set

Last edited by jeanmarc on Sat Mar 16, 2019 3:44 pm, edited 1 time in total.
- Jean Marc :) -

User avatar
odroid
Site Admin
Posts: 31297
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 44 times
Been thanked: 179 times
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by odroid » Fri Mar 08, 2019 1:11 pm

Do you guys check the JMS578 firmware version?
https://wiki.odroid.com/odroid-xu4/soft ... _fw_update

jeanmarc
Posts: 11
Joined: Tue Mar 05, 2019 9:02 pm
languages_spoken: english
ODROIDs: 2 Odroid HC1 boards with 250 GB SSD disk with standard kernel.org kernel Odroid N2 board
Location: near Paris
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by jeanmarc » Sat Mar 09, 2019 5:12 pm

Hi,
Many thanks for the link, please find below my tests...
After downloading link...

Code: Select all


ansible@srv-hc1-110:/tmp$ sha256sum /tmp/jms578fwupdater.tgz                                                                                               
0e729256500ee70bb2caa91c584ff9dca06a262b7437c3b6a6529d5168b9a854  /tmp/jms578fwupdater.tgz 
                                                                
My current release code is (Factory setting from hardkernel in 2018) as defined in example 1 in documentation

Code: Select all

ansible@srv-hc1-110:/tmp$ sudo ./JMS578FwUpdater/JMS578FwUpdate.v1.00 -v                                                                                   
JMicron Firmware Update Tool v0.0.0.1                                                                                                                      
Copyright (C) 2017 JMicron Corp.                                                                                                                           
                                                                                                                                                           
ansible@srv-hc1-110:/tmp$ 
I update now the firmware as defined in example 3 :

Code: Select all

ansible@srv-hc1-110:/tmp/JMS578FwUpdater$ sudo ./JMS578FwUpdate -d /dev/sda -f ./JMS578-Hardkenel-Release-v173.01.00.02-20190306.bin -b ./backup.bin
Update Firmware file name: ./JMS578-Hardkenel-Release-v173.01.00.02-20190306.bin
Backup Firmware file name: ./backup.bin
Backup the ROM code sucessfully.
Programming & Compare Success!!

Read now firmware release so that we expect one change ...

Code: Select all

ansible@srv-hc1-110:/tmp/JMS578FwUpdater$ sudo ./JMS578FwUpdate -v
JMicron Firmware Update Tool v0.0.0.2
Copyright (C) 2018 JMicron Corp.

 

OK ...

Please find below the boot sequence after an on / off operation on the target.
It seems that there is no difference with the previous test for alignment disc issue.
However, with respect to the "ERROR unknown event type 37" of this post, in fact, this error no longer exists

Code: Select all


U-Boot 2017.05-armbian (Jan 11 2019 - 10:29:28 +0100) for ODROID-XU4

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU4 based on EXYNOS5422
Board: Odroid XU4 based on EXYNOS5422
Type:  xu4
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
MMC Device 0 ( SD ): 14.8 GiB
Card did not respond to voltage select!
mmc_init: -95, time 11
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Press quickly 'Enter' twice to stop autoboot:  1  0 
** Unrecognized filesystem type **
** File not found /boot.ini **
12488 bytes read in 27 ms (451.2 KiB/s)
cfgload addr = 0x50000000, Loading boot.ini from ext4 0:1 /boot/boot.ini
cfgload: applying boot.ini...
cfgload: setenv initrd_high "0xffffffff"
cfgload: setenv fdt_high "0xffffffff"
cfgload: setenv macaddr "00:1e:06:61:7a:55"
cfgload: setenv rootdev "UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5"
cfgload: setenv rootfstype "ext4"
cfgload: setenv console "both"
cfgload: setenv verbosity "7"
cfgload: if ext4load mmc 0:1 0x44000000 /boot/armbianEnv.txt || fatload mmc 0:1 0x44000000 armbianEnv.txt || ext4load mmc 0:1 0x44000000 armbianEnv.txt; then env import -t 0x44000000 ${filesize}; fi
379 bytes read in 35 ms (9.8 KiB/s)
cfgload: if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
cfgload: if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttySAC2,115200n8 ${consoleargs}"; fi
cfgload: setenv bootrootfs "${consoleargs} consoleblank=0 loglevel=${verbosity} panic=10 root=${rootdev} rootfstype=${rootfstype} rootwait rw"
cfgload: setenv vout "hdmi"
cfgload: setenv cecenable "false" # false or true
cfgload: setenv governor "performance"
cfgload: setenv ddr_freq 825
cfgload: setenv HPD "true"
cfgload: setenv hdmi_tx_amp_lvl  "31"
cfgload: setenv hdmi_tx_lvl_ch0      "3"
cfgload: setenv hdmi_tx_lvl_ch1      "3"
cfgload: setenv hdmi_tx_lvl_ch2      "3"
cfgload: setenv hdmi_tx_emp_lvl      "6"
cfgload: setenv hdmi_clk_amp_lvl     "31"
cfgload: setenv hdmi_tx_res      "0"
cfgload: setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
cfgload: ext4load mmc 0:1 0x40008000 /boot/zImage || fatload mmc 0:1 0x40008000 zImage || ext4load mmc 0:1 0x40008000 zImage
6051064 bytes read in 472 ms (12.2 MiB/s)
cfgload: ext4load mmc 0:1 0x42000000 /boot/uInitrd || fatload mmc 0:1 0x42000000 uInitrd || ext4load mmc 0:1 0x42000000 uInitrd
3811409 bytes read in 318 ms (11.4 MiB/s)
cfgload: if test "${board_name}" = "xu4"; then setenv fdtfile "exynos5422-odroidxu4.dtb"; fi
cfgload: if test "${board_name}" = "xu3"; then setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
cfgload: if test "${board_name}" = "xu3l"; then setenv fdtfile "exynos5422-odroidxu3-lite.dtb"; fi
cfgload: if test "${board_name}" = "hc1"; then setenv fdtfile "exynos5422-odroidhc1.dtb"; fi
cfgload: if ext4load mmc 0:1 0x00000000 "/boot/.next" || fatload mmc 0:1 0x00000000 ".next"  || ext4load mmc 0:1 0x00000000 ".next"; then echo "Found mainline kernel configuration"; else setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
0 bytes read in 18 ms (0 Bytes/s)
Found mainline kernel configuration
cfgload: ext4load mmc 0:1 0x44000000 /boot/dtb/${fdtfile} || fatload mmc 0:1 0x44000000 dtb/${fdtfile} || ext4load mmc 0:1 0x44000000 dtb/${fdtfile}
54344 bytes read in 56 ms (947.3 KiB/s)
cfgload: fdt addr 0x44000000
cfgload: if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
cfgload: dmc ${ddr_freq}
cfgload: bootz 0x40008000 0x42000000 0x44000000
Kernel image @ 0x40008000 [ 0x000000 - 0x5c54f8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    3811345 Bytes = 3.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 44000000
   Booting using the fdt blob at 0x44000000
   Using Device Tree in place at 44000000, end 44010447

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 5.0.0 (jean-marc_lacroix@vm-stretch-armhf-110) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Wed Mar 6 12:55:18 CET 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid HC1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] Running under secure firmware.
[    0.000000] random: get_random_bytes called from start_kernel+0xa0/0x4a0 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s42636 r8192 d22900 u73728
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=ttySAC2,115200n8 console=tty1 consoleblank=0 loglevel=7 panic=10 root=UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5 rootfstype=ext4 rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  s5p_mfc.mem=16M
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1905572K/2074624K available (9216K kernel code, 759K rwdata, 2392K rodata, 1024K init, 318K bss, 37980K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 760 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 319 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000031] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001462] Console: colour dummy device 80x30
[    0.002151] printk: console [tty1] enabled
[    0.002206] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002247] pid_max: default: 32768 minimum: 301
[    0.002465] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002506] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003484] CPU: Testing write buffer coherency: ok
[    0.004068] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.028058] Setting up static identity map for 0x40100000 - 0x40100060
[    0.028403] ARM CCI driver probed
[    0.028652] Exynos MCPM support installed
[    0.035995] rcu: Hierarchical SRCU implementation.
[    0.051993] smp: Bringing up secondary CPUs ...
[    0.084371] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.116333] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.148327] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.180349] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.180358] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.212343] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.212351] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.244345] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.244353] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.276349] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.276358] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.276598] smp: Brought up 1 node, 8 CPUs
[    0.276647] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.276673] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[    0.276702] CPU: This may indicate a broken bootloader or firmware.
[    0.278137] devtmpfs: initialized
[    0.295905] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    0.296521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.296576] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.303402] pinctrl core: initialized pinctrl subsystem
[    0.306354] NET: Registered protocol family 16
[    0.309049] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.310573] audit: initializing netlink subsys (disabled)
[    0.310916] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
[    0.311803] cpuidle: using governor menu
[    0.312812] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.312849] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.358885] EXYNOS5420 PMU initialized
[    0.404340] random: fast init done
[    0.458457] SCSI subsystem initialized
[    0.458740] usbcore: registered new interface driver usbfs
[    0.458815] usbcore: registered new interface driver hub
[    0.459002] usbcore: registered new device driver usb
[    0.459778] media: Linux media interface: v0.10
[    0.459852] videodev: Linux video capture interface: v2.00
[    0.460633] Advanced Linux Sound Architecture Driver Initialized.
[    0.462205] clocksource: Switched to clocksource mct-frc
[    1.033320] VFS: Disk quotas dquot_6.6.0
[    1.033406] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.048384] NET: Registered protocol family 2
[    1.049164] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.049214] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.049310] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.049477] TCP: Hash tables configured (established 8192 bind 8192)
[    1.049596] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.049649] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.049926] NET: Registered protocol family 1
[    1.050876] RPC: Registered named UNIX socket transport module.
[    1.050956] RPC: Registered udp transport module.
[    1.050976] RPC: Registered tcp transport module.
[    1.050996] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.051226] Trying to unpack rootfs image as initramfs...
[    1.249321] Freeing initrd memory: 3724K
[    1.250800] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.251590] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.256027] Initialise system trusted keyrings
[    1.256287] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.265318] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.266115] NFS: Registering the id_resolver key type
[    1.266157] Key type id_resolver registered
[    1.266176] Key type id_legacy registered
[    1.266248] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.266303] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.339482] Key type asymmetric registered
[    1.339510] Asymmetric key parser 'x509' registered
[    1.339580] bounce: pool size: 64 pages
[    1.339631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.339876] io scheduler mq-deadline registered
[    1.339898] io scheduler kyber registered
[    1.342486] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.342589] samsung-usb2-phy 12130000.phy: Linked as a consumer to regulator.0
[    1.343449] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.343549] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[    1.343583] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.343957] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.344064] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[    1.344098] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.351940] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.351970] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.354711] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.354738] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.355589] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.355616] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.435309] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.437458] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    1.437875] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    1.438328] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    2.330759] printk: console [ttySAC2] enabled
[    2.335442] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    2.345447] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[    2.352403] iommu: Adding device 10850000.g2d to group 0
[    2.356302] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    2.363661] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    2.372413] iommu: Adding device 11c00000.rotator to group 1
[    2.376670] exynos-rotator 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.386976] [drm] Exynos DRM: using 10850000.g2d device for DMA mapping operations
[    2.393167] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[    2.401351] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0a6436c)
[    2.407853] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[    2.416251] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0a64bf8)
[    2.423090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.429673] [drm] No driver support for vblank timestamp query.
[    2.436133] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[    2.455651] brd: module loaded
[    2.470327] loop: module loaded
[    2.472677] libphy: Fixed MDIO Bus: probed
[    2.476411] usbcore: registered new interface driver r8152
[    2.481603] usbcore: registered new interface driver cdc_ether
[    2.487401] usbcore: registered new interface driver cdc_subset
[    2.495122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.500231] ehci-exynos: EHCI EXYNOS driver
[    2.504698] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.509859] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.517718] exynos-ehci 12110000.usb: irq 84, io mem 0x12110000
[    2.538255] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.543114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.551063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.558250] usb usb1: Product: EHCI Host Controller
[    2.563100] usb usb1: Manufacturer: Linux 5.0.0 ehci_hcd
[    2.568385] usb usb1: SerialNumber: 12110000.usb
[    2.573561] hub 1-0:1.0: USB hub found
[    2.576749] hub 1-0:1.0: 3 ports detected
[    2.581576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.586857] ohci-exynos: OHCI EXYNOS driver
[    2.591174] exynos-ohci 12120000.usb: USB Host Controller
[    2.596396] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.604115] exynos-ohci 12120000.usb: irq 84, io mem 0x12120000
[    2.670501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.677336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.685396] usb usb2: Product: USB Host Controller
[    2.689289] usb usb2: Manufacturer: Linux 5.0.0 ohci_hcd
[    2.694573] usb usb2: SerialNumber: 12120000.usb
[    2.699711] hub 2-0:1.0: USB hub found
[    2.702934] hub 2-0:1.0: 3 ports detected
[    2.708319] usbcore: registered new interface driver usb-storage
[    2.713538] mousedev: PS/2 mouse device common for all mice
[    2.719671] i2c /dev entries driver
[    2.738375] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.752088] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[    2.768760] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    2.836322] s5m-rtc s2mps14-rtc: registered as rtc0
[    2.840323] s2mps11-clk s2mps11-clk: DMA mask not set
[    2.846861] IR NEC protocol handler initialized
[    2.849923] IR RC5(x/sz) protocol handler initialized
[    2.854988] IR RC6 protocol handler initialized
[    2.859488] IR JVC protocol handler initialized
[    2.863994] IR Sony protocol handler initialized
[    2.868585] IR SANYO protocol handler initialized
[    2.873265] IR Sharp protocol handler initialized
[    2.877944] IR MCE Keyboard/mouse protocol handler initialized
[    2.883751] IR XMP protocol handler initialized
[    2.888908] iommu: Adding device 11f50000.jpeg to group 2
[    2.893650] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    2.900970] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
[    2.907788] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
[    2.914609] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    2.920291] iommu: Adding device 11f60000.jpeg to group 3
[    2.925451] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    2.932738] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
[    2.939579] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3
[    2.946410] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    2.952531] iommu: Adding device 11000000.codec to group 4
[    2.957797] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    2.964277] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    2.989072] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    2.996783] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.005395] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.015954] s5p-mfc 11000000.codec: decoder registered as /dev/video4
[    3.022379] s5p-mfc 11000000.codec: encoder registered as /dev/video5
[    3.029747] iommu: Adding device 13e00000.video-scaler to group 5
[    3.035110] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.043187] iommu: Adding device 13e10000.video-scaler to group 6
[    3.048999] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.060255] exynos-tmu 10060000.tmu: Linked as a consumer to regulator.7
[    3.065768] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.072949] exynos-tmu 10064000.tmu: Linked as a consumer to regulator.7
[    3.079067] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.086277] exynos-tmu 10068000.tmu: Linked as a consumer to regulator.7
[    3.092425] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.099615] exynos-tmu 1006c000.tmu: Linked as a consumer to regulator.7
[    3.105770] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.112970] exynos-tmu 100a0000.tmu: Linked as a consumer to regulator.7
[    3.119118] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.126556] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    3.134589] device-mapper: uevent: version 1.0.3
[    3.138737] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.147798] cpu cpu0: Linked as a consumer to regulator.44
[    3.152344] cpu cpu0: Dropping the link to regulator.44
[    3.158167] cpu cpu0: Linked as a consumer to regulator.44
[    3.169591] cpu cpu4: Linked as a consumer to regulator.40
[    3.181165] sdhci: Secure Digital Host Controller Interface driver
[    3.185894] sdhci: Copyright(c) Pierre Ossman
[    3.190390] Synopsys Designware Multimedia Card Interface Driver
[    3.196738] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.203148] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.209465] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.214861] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[    3.224168] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.19
[    3.231093] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.13
[    3.253473] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.287481] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.292020] hidraw: raw HID events driver (C) Jiri Kosina
[    3.297426] usbcore: registered new interface driver usbhid
[    3.302687] usbhid: USB HID core driver
[    3.307652] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[    3.313889] exynos-bus soc:bus_wcore: Dropping the link to regulator.41
[    3.326953] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.332231] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.338835] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.345403] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.354493] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.354812] drop_monitor: Initializing network drop monitor service
[    3.366969] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[    3.369705] NET: Registered protocol family 17
[    3.377101] mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
[    3.380315] NET: Registered protocol family 15
[    3.389159] Key type dns_resolver registered
[    3.390022]  mmcblk0: p1
[    3.393958] Registering SWP/SWPB emulation handler
[    3.401127] registered taskstats version 1
[    3.404715] Loading compiled-in X.509 certificates
[    3.415408] Key type encrypted registered
[    3.445692] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[    3.451369] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[    3.457844] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[    3.463513] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.468546] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[    3.476353] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.485544] xhci-hcd xhci-hcd.0.auto: irq 146, io mem 0x12000000
[    3.491786] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.499727] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.506912] usb usb3: Product: xHCI Host Controller
[    3.511763] usb usb3: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.517049] usb usb3: SerialNumber: xhci-hcd.0.auto
[    3.522314] hub 3-0:1.0: USB hub found
[    3.525628] hub 3-0:1.0: 1 port detected
[    3.529763] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.535006] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    3.542619] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    3.549258] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.557373] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.565495] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.572685] usb usb4: Product: xHCI Host Controller
[    3.577536] usb usb4: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.582822] usb usb4: SerialNumber: xhci-hcd.0.auto
[    3.588059] hub 4-0:1.0: USB hub found
[    3.591427] hub 4-0:1.0: 1 port detected
[    3.596274] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[    3.602404] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[    3.608844] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[    3.614458] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.619573] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
[    3.627379] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.636583] xhci-hcd xhci-hcd.1.auto: irq 147, io mem 0x12400000
[    3.642817] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.650762] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.657952] usb usb5: Product: xHCI Host Controller
[    3.662804] usb usb5: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.668095] usb usb5: SerialNumber: xhci-hcd.1.auto
[    3.673244] hub 5-0:1.0: USB hub found
[    3.676693] hub 5-0:1.0: 1 port detected
[    3.680785] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.686034] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6
[    3.693656] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    3.700294] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.708403] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.716534] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.723724] usb usb6: Product: xHCI Host Controller
[    3.728574] usb usb6: Manufacturer: Linux 5.0.0 xhci-hcd
[    3.733860] usb usb6: SerialNumber: xhci-hcd.1.auto
[    3.739066] hub 6-0:1.0: USB hub found
[    3.742459] hub 6-0:1.0: 1 port detected
[    3.747307] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.752048] s3c-rtc 101e0000.rtc: registered as rtc1
[    3.758081] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[    3.763850] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    3.772395] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    3.780348] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[    3.788715] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[    3.797035] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    3.805376] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    3.813370] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    3.821287] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    3.829638] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    3.837635] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    3.846061] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    3.854225] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    3.862586] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    3.871303] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    3.879532] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    3.888389] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    3.898537] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:09 UTC (946684809)
[    3.935147] vddq_mmc0: disabling
[    3.938171] vdd_adc: disabling
[    3.941237] vdd_ldo12: disabling
[    3.953509] ALSA device list:
[    3.955024]   No soundcards found.
[    3.958999] Freeing unused kernel memory: 1024K
[    3.974444] Run /init as init process
[    4.008065] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.014392] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.014439] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.790369] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.815911] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.02
[    4.815920] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.829750] usb 4-1: Product: USB to ATA/ATAPI Bridge
[    4.829755] usb 4-1: Manufacturer: JMicron
[    4.829762] usb 4-1: SerialNumber: 0123456789ABCDEF
[    4.902340] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.927416] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    4.934168] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.941265] usb 6-1: Product: USB 10/100/1000 LAN
[    4.945939] usb 6-1: Manufacturer: Realtek
[    4.950015] usb 6-1: SerialNumber: 000001000000
[    5.156493] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    5.239405] r8152 6-1:1.0 eth0: v1.09.9
[    5.605790] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    5.605800] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    5.642309] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[    5.689206] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    6.951369] scsi host0: uas
[    6.952973] scsi 0:0:0:0: Direct-Access     JMicron  Generic          3102 PQ: 0 ANSI: 6
[    6.961874] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.460431] usbcore: registered new interface driver uas
[    7.461371] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    7.471768] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    7.471976] sd 0:0:0:0: [sda] Write Protect is off
[    7.482135] sd 0:0:0:0: [sda] Disabling FUA
[    7.485898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.489321] random: crng init done
[    7.498270] random: 7 urandom warning(s) missed due to ratelimiting
[    7.504409]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 >
[    7.530519] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.061881] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    9.077214] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    9.094871] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    9.110521] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    9.132233] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    9.147654] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    9.164467] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    9.181039] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    9.199848] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    9.215257] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    9.215581] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    9.248617] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    9.266369] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    9.282268] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    9.282446] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    9.282456] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    9.295370] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    9.349412] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    9.349647] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    9.383036] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    9.392159] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    9.416674] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    9.416907] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    9.416916] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    9.435268] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.484495] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.501456] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.518108] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    9.522899] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.551743] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.551965] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.585341] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    9.602654] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    9.618968] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    9.619240] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    9.652596] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.409880] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.425114] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.425404] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.458380] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  128.460530] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.491829] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.492040] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.525452] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  128.527588] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.559078] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.559293] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.592695] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  128.594937] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.626405] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.626627] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.660199] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  128.662397] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.693994] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.694268] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.727788] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  128.729865] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.761584] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.761796] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.795436] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  128.813275] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.813281] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.813478] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.862990] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  128.865068] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.896764] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.896976] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.930559] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  128.932573] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.964354] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.964567] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  128.998148] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.222540] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.237994] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.238627] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.271321] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.273919] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.304851] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.305149] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.338475] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  188.340970] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.372097] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.372369] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.405714] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  188.408309] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.439441] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.439822] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.473220] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  188.475782] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.507031] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.507216] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.540811] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  188.558133] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.558148] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.591653] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.591660] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  188.628501] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.628511] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.628716] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.677907] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  188.679148] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.679155] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.679265] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.679271] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  188.680313] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.680319] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.680431] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.680437] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  188.681509] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.681515] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.681627] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  188.681633] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.275069] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.290463] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.290903] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.323848] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.326335] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.357289] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.357519] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.390734] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  189.392717] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.424275] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.424498] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.457891] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  189.460179] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.491518] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.491732] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.525145] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  189.527453] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.558759] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.558975] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.592379] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  189.594566] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.626001] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.626252] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.659623] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  189.661710] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.693244] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.693467] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.726866] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  189.728908] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.760575] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.760793] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.794421] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  189.819406] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.834941] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.835349] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  189.868726] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  190.257415] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  190.257425] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  190.289904] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  190.306289] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  190.309085] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.339729] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.339980] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.373336] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  190.375880] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.406959] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.407188] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.440578] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  190.442708] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.474309] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.474580] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.508085] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  190.510177] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.541878] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.542095] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.575671] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  190.577783] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.609465] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.609683] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.643259] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  190.645291] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.677054] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.677270] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.710849] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  190.712858] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.744647] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.744861] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.778459] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  190.796543] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.812248] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.812473] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.846031] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  190.848237] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.879841] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.880107] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  190.913623] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  191.257711] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.273078] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.273328] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.306489] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.318479] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.339937] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.340044] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.373384] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  191.374466] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.406922] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.407022] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.440540] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  191.441493] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.474161] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.474313] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.507781] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  191.508808] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.541449] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.541584] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.575025] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  191.576222] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.608645] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.608747] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.642270] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  191.643305] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.675889] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.675987] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.709510] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  191.710566] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.743220] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.743314] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.777014] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  191.778013] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.810864] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.811080] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  191.844624] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  192.195848] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.211178] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.211706] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.244362] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  192.255057] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.277714] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.277941] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.311161] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  192.313278] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.344618] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.344838] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.378057] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  192.380218] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.411593] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.411817] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.445214] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  192.447337] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.478839] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.479033] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.512457] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  192.514657] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.546080] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.546377] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.579702] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  192.581701] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.613324] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.613535] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.646945] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  192.649156] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.680568] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.680786] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.714225] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  192.732730] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.732737] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.732965] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  192.781786] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  193.151683] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.151695] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.183861] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.200229] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.217396] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  193.217404] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  193.217517] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  193.267007] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  193.268074] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.300537] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.300638] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.334160] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  193.335242] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.367780] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.367876] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.401399] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  193.402436] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.435025] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.435120] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.468640] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  193.469702] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.502268] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.502365] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.535884] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  193.536912] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.569508] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.569605] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.603130] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  193.605243] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.636666] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.636879] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.670113] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.672437] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.703563] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.703571] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.703576] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.753820] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.753827] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.754049] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.804106] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.820811] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.820820] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.820826] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  193.820831] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  193.823032] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.904799] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.921799] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.921805] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  193.956936] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  193.972521] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  193.989488] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  193.989494] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4102028800
[  194.447534] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.462786] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.463197] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.496042] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  194.498339] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.529402] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.529631] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.562851] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  194.564810] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.596299] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.596522] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.629748] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  194.631874] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.663295] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.663580] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.696904] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  194.699053] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.730537] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.730652] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.764147] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  194.765183] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.797770] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.797866] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.831398] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  194.832442] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.865013] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.865110] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.898655] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  194.899682] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.932274] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.932377] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.965883] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  194.966967] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  194.999505] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  194.999618] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.033141] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.429108] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.444364] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.444711] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.477615] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.487021] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.510978] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.511206] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.544424] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  195.546610] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.577875] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.578098] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.611326] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  195.613328] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.644861] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.645086] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.678482] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  195.680448] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.712100] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.712198] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.745722] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  195.746806] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.779277] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.779372] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.812711] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  195.813766] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.846257] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.846367] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.879862] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  195.880851] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.913499] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.913619] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.947109] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  195.948110] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.980794] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  195.980939] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.014356] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.273407] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.288704] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.289136] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.321929] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  196.324879] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.355288] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.355585] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.388727] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  196.391387] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.422290] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.439039] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.439045] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  196.474053] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.489485] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.489639] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.523078] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  196.524159] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.556696] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.556802] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.590316] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  196.591295] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.623940] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.624038] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.657559] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  196.658626] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.691282] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.691396] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.725073] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  196.726154] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.758858] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.759053] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.792660] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  196.794974] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.826447] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.826648] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  196.860242] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.224870] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.240342] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.240859] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.273905] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  197.291206] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.291215] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.291342] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.341428] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  197.342851] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.375238] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.375379] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.408989] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  197.410172] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.442862] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.442967] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.476828] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  197.477880] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.510801] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.510898] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.544768] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  197.545757] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.578735] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.578828] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.612703] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  197.613709] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.646671] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.646768] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.680639] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  197.681683] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.714608] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.714706] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.748577] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  197.749670] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.782562] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.782662] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  197.816518] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.258972] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  198.286404] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  198.302819] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  198.318711] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  198.330718] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  198.352338] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  198.352455] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  198.386127] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  198.387237] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.419926] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.420023] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.453717] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  198.454769] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.487597] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.487694] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.521565] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  198.522625] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.555568] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.555665] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.589502] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  198.590619] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.623471] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.623568] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.657439] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  198.658503] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.691407] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.691503] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.725376] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  198.726407] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.759372] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.759466] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.793314] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  198.794357] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.827296] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.827392] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  198.861250] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  199.549601] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[  201.118323] 8021q: 802.1Q VLAN Support v1.8
[  201.155306] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  201.974276] r8152 6-1:1.0 eth0: carrier on
[  202.125760] NET: Registered protocol family 10
[  202.130936] Segment Routing with IPv6
[  202.141447] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  202.166795] br-service: port 1(eth0.6) entered blocking state
[  202.171107] br-service: port 1(eth0.6) entered disabled state
[  202.177213] device eth0.6 entered promiscuous mode
[  202.181625] device eth0 entered promiscuous mode
[  202.186349] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.191840] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.198343] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.210387] br-service: port 1(eth0.6) entered blocking state
[  202.214685] br-service: port 1(eth0.6) entered forwarding state
[  202.370901] br-service: port 2(br-eth-service) entered blocking state
[  202.375978] br-service: port 2(br-eth-service) entered disabled state
[  202.382700] device br-eth-service entered promiscuous mode
[  202.395601] br-service: port 2(br-eth-service) entered blocking state
[  202.400618] br-service: port 2(br-eth-service) entered forwarding state
[  202.560318] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-service: link becomes ready
[  202.795732] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.810065] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.814411] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.856337] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.911933] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.916228] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.922035] br-ntp: port 1(eth0.7) entered blocking state
[  202.926501] br-ntp: port 1(eth0.7) entered disabled state
[  202.926701] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.932116] device eth0.7 entered promiscuous mode
[  202.942246] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.951159] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  202.963925] br-ntp: port 1(eth0.7) entered blocking state
[  202.967880] br-ntp: port 1(eth0.7) entered forwarding state
[  203.087321] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.108758] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.113115] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.170947] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.267675] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.278990] br-admin: port 1(eth0.9) entered blocking state
[  203.283139] br-admin: port 1(eth0.9) entered disabled state
[  203.283320] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.283805] device eth0.9 entered promiscuous mode
[  203.299081] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.307691] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.322686] br-admin: port 1(eth0.9) entered blocking state
[  203.326834] br-admin: port 1(eth0.9) entered forwarding state
[  203.488547] br-admin: port 2(br-eth-admin) entered blocking state
[  203.493288] br-admin: port 2(br-eth-admin) entered disabled state
[  203.499796] device br-eth-admin entered promiscuous mode
[  203.513217] br-admin: port 2(br-eth-admin) entered blocking state
[  203.517883] br-admin: port 2(br-eth-admin) entered forwarding state
[  203.669714] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-admin: link becomes ready
[  203.916937] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.931165] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.935433] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  203.977745] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.070301] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.074574] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.080334] br-user: port 1(eth0.8) entered blocking state
[  204.084935] br-user: port 1(eth0.8) entered disabled state
[  204.090473] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.094570] device eth0.8 entered promiscuous mode
[  204.100657] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.107730] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.119490] br-user: port 1(eth0.8) entered blocking state
[  204.123526] br-user: port 1(eth0.8) entered forwarding state
[  204.268701] br-user: port 2(br-eth-user) entered blocking state
[  204.273190] br-user: port 2(br-eth-user) entered disabled state
[  204.273645] device br-eth-user entered promiscuous mode
[  204.293913] br-user: port 2(br-eth-user) entered blocking state
[  204.298395] br-user: port 2(br-eth-user) entered forwarding state
[  204.459234] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-user: link becomes ready
[  204.723182] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.737542] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.741800] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.782818] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.882460] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.886708] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.893530] br-wifi: port 1(eth0.11) entered blocking state
[  204.897670] br-wifi: port 1(eth0.11) entered disabled state
[  204.903415] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.908678] device eth0.11 entered promiscuous mode
[  204.913670] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.921810] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  204.933168] br-wifi: port 1(eth0.11) entered blocking state
[  204.937297] br-wifi: port 1(eth0.11) entered forwarding state
[  205.055872] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.075609] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.079935] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.147775] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.278052] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.282429] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.288097] br-alarm: port 1(eth0.4) entered blocking state
[  205.292773] br-alarm: port 1(eth0.4) entered disabled state
[  205.298461] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.299481] device eth0.4 entered promiscuous mode
[  205.308598] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.316870] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.328764] br-alarm: port 1(eth0.4) entered blocking state
[  205.332891] br-alarm: port 1(eth0.4) entered forwarding state
[  205.454444] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.473115] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.477669] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.542705] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.663009] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.668829] br-vpn: port 1(eth0.13) entered blocking state
[  205.672899] br-vpn: port 1(eth0.13) entered disabled state
[  205.678472] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.683979] device eth0.13 entered promiscuous mode
[  205.688848] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.696287] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.709979] br-vpn: port 1(eth0.13) entered blocking state
[  205.714035] br-vpn: port 1(eth0.13) entered forwarding state
[  205.831610] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.851703] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.856230] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  205.915260] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.045306] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.049681] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.055412] br-trusted: port 1(eth0.12) entered blocking state
[  206.060295] br-trusted: port 1(eth0.12) entered disabled state
[  206.066302] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.067253] device eth0.12 entered promiscuous mode
[  206.076547] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.086037] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.096410] br-trusted: port 1(eth0.12) entered blocking state
[  206.100811] br-trusted: port 1(eth0.12) entered forwarding state
[  206.220426] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.241721] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.246120] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.307644] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.429051] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.433380] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.439163] br-fonera: port 1(eth0.3) entered blocking state
[  206.443909] br-fonera: port 1(eth0.3) entered disabled state
[  206.449671] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.455024] device eth0.3 entered promiscuous mode
[  206.459844] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.468584] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.479447] br-fonera: port 1(eth0.3) entered blocking state
[  206.483672] br-fonera: port 1(eth0.3) entered forwarding state
[  206.602824] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.621296] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.625592] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.687351] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.803060] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.808301] br-factory: port 1(eth0.15) entered blocking state
[  206.812804] br-factory: port 1(eth0.15) entered disabled state
[  206.818690] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.824099] device eth0.15 entered promiscuous mode
[  206.829052] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.836946] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  206.849520] br-factory: port 1(eth0.15) entered blocking state
[  206.853916] br-factory: port 1(eth0.15) entered forwarding state
[  206.987123] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.006579] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.010962] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.071094] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.106339] IPv6: ADDRCONF(NETDEV_CHANGE): br-trusted: link becomes ready
[  207.189084] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.193352] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.200937] br-wan: port 1(eth0.5) entered blocking state
[  207.204916] br-wan: port 1(eth0.5) entered disabled state
[  207.210440] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.213686] device eth0.5 entered promiscuous mode
[  207.220672] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.228455] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.241705] br-wan: port 1(eth0.5) entered blocking state
[  207.245665] br-wan: port 1(eth0.5) entered forwarding state
[  207.406978] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.413051] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.426927] br-test-1: port 1(eth0.1) entered blocking state
[  207.431197] br-test-1: port 1(eth0.1) entered disabled state
[  207.437076] device eth0.1 entered promiscuous mode
[  207.446689] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.451670] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.463332] br-test-1: port 1(eth0.1) entered blocking state
[  207.467561] br-test-1: port 1(eth0.1) entered forwarding state
[  207.656941] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.670441] br-test-2: port 1(eth0.2) entered blocking state
[  207.674665] br-test-2: port 1(eth0.2) entered disabled state
[  207.680666] device eth0.2 entered promiscuous mode
[  207.689831] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.694274] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.714736] br-test-2: port 1(eth0.2) entered blocking state
[  207.718958] br-test-2: port 1(eth0.2) entered forwarding state
[  207.936939] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.952444] br-test-3: port 1(eth0.10) entered blocking state
[  207.956875] br-test-3: port 1(eth0.10) entered disabled state
[  207.962815] device eth0.10 entered promiscuous mode
[  207.973768] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.978069] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  207.994275] br-test-3: port 1(eth0.10) entered blocking state
[  207.998584] br-test-3: port 1(eth0.10) entered forwarding state
[  209.711327] br-admin: port 3(e-dns-adm) entered blocking state
[  209.719005] br-admin: port 3(e-dns-adm) entered disabled state
[  209.723660] device e-dns-adm entered promiscuous mode
[  209.731060] br-alarm: port 2(e-dns-alar) entered blocking state
[  209.735550] br-alarm: port 2(e-dns-alar) entered disabled state
[  209.735889] device e-dns-alar entered promiscuous mode
[  209.747129] br-alarm: port 2(e-dns-alar) entered blocking state
[  209.752455] br-alarm: port 2(e-dns-alar) entered forwarding state
[  209.761805] br-user: port 3(e-dns-usr) entered blocking state
[  209.766356] br-user: port 3(e-dns-usr) entered disabled state
[  209.772310] device e-dns-usr entered promiscuous mode
[  209.773306] br-user: port 3(e-dns-usr) entered blocking state
[  209.782578] br-user: port 3(e-dns-usr) entered forwarding state
[  209.792946] br-ntp: port 2(e-dns-ntp) entered blocking state
[  209.797199] br-ntp: port 2(e-dns-ntp) entered disabled state
[  209.797990] device e-dns-ntp entered promiscuous mode
[  209.808569] br-ntp: port 2(e-dns-ntp) entered blocking state
[  209.813506] br-ntp: port 2(e-dns-ntp) entered forwarding state
[  209.822691] br-vpn: port 2(e-dns-vpn) entered blocking state
[  209.826937] br-vpn: port 2(e-dns-vpn) entered disabled state
[  209.827237] device e-dns-vpn entered promiscuous mode
[  209.838532] br-vpn: port 2(e-dns-vpn) entered blocking state
[  209.843227] br-vpn: port 2(e-dns-vpn) entered forwarding state
[  209.855065] br-wifi: port 2(e-dns-wifi) entered blocking state
[  209.860794] br-wifi: port 2(e-dns-wifi) entered disabled state
[  209.865953] device e-dns-wifi entered promiscuous mode
[  209.869119] br-wifi: port 2(e-dns-wifi) entered blocking state
[  209.876239] br-wifi: port 2(e-dns-wifi) entered forwarding state
[  209.897829] br-service: port 3(e-dns-srv) entered blocking state
[  209.902462] br-service: port 3(e-dns-srv) entered disabled state
[  209.902872] device e-dns-srv entered promiscuous mode
[  209.914510] br-service: port 3(e-dns-srv) entered blocking state
[  209.919427] br-service: port 3(e-dns-srv) entered forwarding state
[  209.934887] br-trusted: port 2(e-dns-trus) entered blocking state
[  209.939675] br-trusted: port 2(e-dns-trus) entered disabled state
[  209.940193] device e-dns-trus entered promiscuous mode
[  209.941201] br-trusted: port 2(e-dns-trus) entered blocking state
[  209.956847] br-trusted: port 2(e-dns-trus) entered forwarding state
[  209.971999] br-fonera: port 2(e-dns-fone) entered blocking state
[  209.976663] br-fonera: port 2(e-dns-fone) entered disabled state
[  209.977190] device e-dns-fone entered promiscuous mode
[  209.988788] br-fonera: port 2(e-dns-fone) entered blocking state
[  209.993718] br-fonera: port 2(e-dns-fone) entered forwarding state
[  210.008062] br-factory: port 2(e-dns-fact) entered blocking state
[  210.012805] br-factory: port 2(e-dns-fact) entered disabled state
[  210.013229] device e-dns-fact entered promiscuous mode
[  210.025251] br-factory: port 2(e-dns-fact) entered blocking state
[  210.030055] br-factory: port 2(e-dns-fact) entered forwarding state
[  210.046815] br-test-1: port 2(e-dns-tst1) entered blocking state
[  210.051451] br-test-1: port 2(e-dns-tst1) entered disabled state
[  210.051993] device e-dns-tst1 entered promiscuous mode
[  210.052944] br-test-1: port 2(e-dns-tst1) entered blocking state
[  210.068512] br-test-1: port 2(e-dns-tst1) entered forwarding state
[  210.084774] br-test-2: port 2(e-dns-tst2) entered blocking state
[  210.089417] br-test-2: port 2(e-dns-tst2) entered disabled state
[  210.089951] device e-dns-tst2 entered promiscuous mode
[  210.090959] br-test-2: port 2(e-dns-tst2) entered blocking state
[  210.106459] br-test-2: port 2(e-dns-tst2) entered forwarding state
[  210.123414] br-test-3: port 2(e-dns-tst3) entered blocking state
[  210.128114] br-test-3: port 2(e-dns-tst3) entered disabled state
[  210.128542] device e-dns-tst3 entered promiscuous mode
[  210.141349] br-test-3: port 2(e-dns-tst3) entered blocking state
[  210.141364] br-test-3: port 2(e-dns-tst3) entered forwarding state
[  210.157445] cgroup: lxc-autostart (10334) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  210.172024] cgroup: "memory" requires setting use_hierarchy to 1 on the root
[  210.747907] br-alarm: port 2(e-dns-alar) entered disabled state
[  210.752751] br-user: port 3(e-dns-usr) entered disabled state
[  210.759384] br-ntp: port 2(e-dns-ntp) entered disabled state
[  210.776640] br-vpn: port 2(e-dns-vpn) entered disabled state
[  210.796582] br-wifi: port 2(e-dns-wifi) entered disabled state
[  210.803323] br-service: port 3(e-dns-srv) entered disabled state
[  210.814048] br-trusted: port 2(e-dns-trus) entered disabled state
[  210.820113] br-fonera: port 2(e-dns-fone) entered disabled state
[  210.826488] br-factory: port 2(e-dns-fact) entered disabled state
[  210.832945] br-test-1: port 2(e-dns-tst1) entered disabled state
[  210.837963] br-test-2: port 2(e-dns-tst2) entered disabled state
[  210.843934] br-test-3: port 2(e-dns-tst3) entered disabled state
[  211.087272] EXT4-fs (dm-76): couldn't mount as ext3 due to feature incompatibilities
[  211.172400] EXT4-fs (dm-76): recovery complete
[  211.182472] EXT4-fs (dm-76): mounted filesystem with ordered data mode. Opts: (null)
[  211.191488] eth-admin: renamed from veth2E1DG8
[  211.249076] eth-alarm: renamed from vethI9LCRJ
[  211.320323] eth-user: renamed from vethHXLWQM
[  211.347776] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  211.353856] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-adm: link becomes ready
[  211.361047] br-admin: port 3(e-dns-adm) entered blocking state
[  211.365630] br-admin: port 3(e-dns-adm) entered forwarding state
[  211.371852] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  211.378907] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-alar: link becomes ready
[  211.385316] br-alarm: port 2(e-dns-alar) entered blocking state
[  211.390910] br-alarm: port 2(e-dns-alar) entered forwarding state
[  211.401503] eth-ntp: renamed from vethM4V7ET
[  211.464977] eth-vpn: renamed from vethRDU0EW
[  211.499576] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  211.505639] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-usr: link becomes ready
[  211.512188] br-user: port 3(e-dns-usr) entered blocking state
[  211.517221] br-user: port 3(e-dns-usr) entered forwarding state
[  211.524297] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  211.530165] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-ntp: link becomes ready
[  211.536644] br-ntp: port 2(e-dns-ntp) entered blocking state
[  211.541919] br-ntp: port 2(e-dns-ntp) entered forwarding state
[  211.550013] eth-wifi: renamed from vethV7NODV
[  211.603623] eth-srv: renamed from veth3D2MW4
[  211.651242] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  211.657080] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-vpn: link becomes ready
[  211.664555] br-vpn: port 2(e-dns-vpn) entered blocking state
[  211.668858] br-vpn: port 2(e-dns-vpn) entered forwarding state
[  211.678848] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  211.684725] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-wifi: link becomes ready
[  211.692411] br-wifi: port 2(e-dns-wifi) entered blocking state
[  211.692424] br-wifi: port 2(e-dns-wifi) entered forwarding state
[  211.704201] eth-trust: renamed from veth9VYHUU
[  211.780424] eth-foner: renamed from vethPF5EF7
[  211.835186] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  211.842592] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-srv: link becomes ready
[  211.850164] br-service: port 3(e-dns-srv) entered blocking state
[  211.854819] br-service: port 3(e-dns-srv) entered forwarding state
[  211.865291] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  211.871135] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-trus: link becomes ready
[  211.878793] br-trusted: port 2(e-dns-trus) entered blocking state
[  211.883519] br-trusted: port 2(e-dns-trus) entered forwarding state
[  211.891660] eth-fact: renamed from veth09MBQ9
[  211.980313] eth-tst1: renamed from vethC0X7QM
[  212.023452] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  212.029344] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-fone: link becomes ready
[  212.039796] br-fonera: port 2(e-dns-fone) entered blocking state
[  212.044446] br-fonera: port 2(e-dns-fone) entered forwarding state
[  212.045576] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  212.058178] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-fact: link becomes ready
[  212.064233] br-factory: port 2(e-dns-fact) entered blocking state
[  212.070037] br-factory: port 2(e-dns-fact) entered forwarding state
[  212.072046] eth-tst2: renamed from vethA8KB2R
[  212.120777] eth-tst3: renamed from vethEVP3VU
[  212.171313] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  212.177184] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst1: link becomes ready
[  212.184618] br-test-1: port 2(e-dns-tst1) entered blocking state
[  212.189319] br-test-1: port 2(e-dns-tst1) entered forwarding state
[  212.192839] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  212.203848] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst2: link becomes ready
[  212.210331] br-test-2: port 2(e-dns-tst2) entered blocking state
[  212.210344] br-test-2: port 2(e-dns-tst2) entered forwarding state
[  212.223463] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  212.237714] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst3: link becomes ready
[  212.249078] br-test-3: port 2(e-dns-tst3) entered blocking state
[  212.249090] br-test-3: port 2(e-dns-tst3) entered forwarding state
[  212.291409] EXT4-fs (dm-77): recovery complete
[  212.300856] EXT4-fs (dm-77): mounted filesystem with ordered data mode. Opts: (null)
[  212.337041] EXT4-fs (dm-78): recovery complete
[  212.346404] EXT4-fs (dm-78): mounted filesystem with ordered data mode. Opts: (null)
[  212.400462] EXT4-fs (dm-79): recovery complete
[  212.409836] EXT4-fs (dm-79): mounted filesystem with ordered data mode. Opts: (null)
[  212.439975] EXT4-fs (dm-80): recovery complete
[  212.443090] EXT4-fs (dm-80): mounted filesystem with ordered data mode. Opts: (null)
[  212.522791] EXT4-fs (dm-81): recovery complete
[  212.531949] EXT4-fs (dm-81): mounted filesystem with ordered data mode. Opts: (null)
[  212.588949] EXT4-fs (dm-82): 1 orphan inode deleted
[  212.592471] EXT4-fs (dm-82): recovery complete
[  212.628712] EXT4-fs (dm-82): mounted filesystem with ordered data mode. Opts: (null)
[  212.646007] EXT4-fs (dm-83): recovery complete
[  212.649083] EXT4-fs (dm-83): mounted filesystem with ordered data mode. Opts: (null)
[  212.668026] EXT4-fs (dm-84): recovery complete
[  212.671133] EXT4-fs (dm-84): mounted filesystem with ordered data mode. Opts: (null)
[  212.761047] br-admin: port 4(e-dhcp-adm) entered blocking state
[  212.765627] br-admin: port 4(e-dhcp-adm) entered disabled state
[  212.766011] device e-dhcp-adm entered promiscuous mode
[  212.777361] br-admin: port 4(e-dhcp-adm) entered blocking state
[  212.782502] br-admin: port 4(e-dhcp-adm) entered forwarding state
[  212.793085] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  212.797709] br-alarm: port 3(e-dhcp-alar) entered disabled state
[  212.798018] device e-dhcp-alar entered promiscuous mode
[  212.809736] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  212.814872] br-alarm: port 3(e-dhcp-alar) entered forwarding state
[  212.831889] br-user: port 4(e-dhcp-usr) entered blocking state
[  212.836320] br-user: port 4(e-dhcp-usr) entered disabled state
[  212.844367] device e-dhcp-usr entered promiscuous mode
[  212.849146] br-admin: port 4(e-dhcp-adm) entered disabled state
[  212.855607] br-alarm: port 3(e-dhcp-alar) entered disabled state
[  212.874932] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  212.880653] br-ntp: port 3(e-dhcp-ntp) entered disabled state
[  212.887340] device e-dhcp-ntp entered promiscuous mode
[  212.892790] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  212.897145] br-ntp: port 3(e-dhcp-ntp) entered forwarding state
[  212.913468] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  212.917836] br-vpn: port 3(e-dhcp-vpn) entered disabled state
[  212.924330] device e-dhcp-vpn entered promiscuous mode
[  212.924916] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  212.924924] br-vpn: port 3(e-dhcp-vpn) entered forwarding state
[  212.939455] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  212.951726] br-wifi: port 3(e-dhcp-wifi) entered disabled state
[  212.958670] device e-dhcp-wifi entered promiscuous mode
[  212.959309] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  212.959317] br-wifi: port 3(e-dhcp-wifi) entered forwarding state
[  212.977515] br-service: port 4(e-dhcp-srv) entered blocking state
[  212.977525] br-service: port 4(e-dhcp-srv) entered disabled state
[  212.977813] device e-dhcp-srv entered promiscuous mode
[  212.981826] br-service: port 4(e-dhcp-srv) entered blocking state
[  213.002344] br-service: port 4(e-dhcp-srv) entered forwarding state
[  213.028472] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  213.028482] br-trusted: port 3(e-dhcp-trus) entered disabled state
[  213.028813] device e-dhcp-trus entered promiscuous mode
[  213.051752] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  213.056511] br-trusted: port 3(e-dhcp-trus) entered forwarding state
[  213.086622] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  213.091461] br-fonera: port 3(e-dhcp-fone) entered disabled state
[  213.098447] device e-dhcp-fone entered promiscuous mode
[  213.104381] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  213.109056] br-fonera: port 3(e-dhcp-fone) entered forwarding state
[  213.141023] br-factory: port 3(e-dhcp-fact) entered blocking state
[  213.149654] br-factory: port 3(e-dhcp-fact) entered disabled state
[  213.156046] device e-dhcp-fact entered promiscuous mode
[  213.160915] br-factory: port 3(e-dhcp-fact) entered blocking state
[  213.166004] br-factory: port 3(e-dhcp-fact) entered forwarding state
[  213.192491] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  213.197200] br-test-1: port 3(e-dhcp-tst1) entered disabled state
[  213.204120] device e-dhcp-tst1 entered promiscuous mode
[  213.210177] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  213.214850] br-test-1: port 3(e-dhcp-tst1) entered forwarding state
[  213.251337] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  213.256065] br-test-2: port 3(e-dhcp-tst2) entered disabled state
[  213.267498] device e-dhcp-tst2 entered promiscuous mode
[  213.272241] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  213.277361] br-test-2: port 3(e-dhcp-tst2) entered forwarding state
[  213.305189] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  213.313925] br-test-3: port 3(e-dhcp-tst3) entered disabled state
[  213.320180] device e-dhcp-tst3 entered promiscuous mode
[  213.320777] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  213.320785] br-test-3: port 3(e-dhcp-tst3) entered forwarding state
[  213.860997] br-ntp: port 3(e-dhcp-ntp) entered disabled state
[  213.865925] br-vpn: port 3(e-dhcp-vpn) entered disabled state
[  213.876050] br-wifi: port 3(e-dhcp-wifi) entered disabled state
[  213.937169] br-service: port 4(e-dhcp-srv) entered disabled state
[  213.955285] br-trusted: port 3(e-dhcp-trus) entered disabled state
[  213.980898] br-fonera: port 3(e-dhcp-fone) entered disabled state
[  214.008745] br-factory: port 3(e-dhcp-fact) entered disabled state
[  214.015078] br-test-1: port 3(e-dhcp-tst1) entered disabled state
[  214.032318] br-test-2: port 3(e-dhcp-tst2) entered disabled state
[  214.040903] br-test-3: port 3(e-dhcp-tst3) entered disabled state
[  214.286550] EXT4-fs (dm-94): couldn't mount as ext3 due to feature incompatibilities
[  214.350050] EXT4-fs (dm-94): recovery complete
[  214.359299] EXT4-fs (dm-94): mounted filesystem with ordered data mode. Opts: (null)
[  214.368332] eth-admin: renamed from vethBS5P2O
[  214.437114] eth-alarm: renamed from vethUT6HUJ
[  214.476402] eth-user: renamed from veth381GWX
[  214.527141] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  214.533091] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-adm: link becomes ready
[  214.539907] br-admin: port 4(e-dhcp-adm) entered blocking state
[  214.545145] br-admin: port 4(e-dhcp-adm) entered forwarding state
[  214.552418] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  214.558496] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-alar: link becomes ready
[  214.565803] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  214.570681] br-alarm: port 3(e-dhcp-alar) entered forwarding state
[  214.581587] eth-ntp: renamed from vethHG3F4M
[  214.644386] eth-vpn: renamed from veth0GTTVM
[  214.691307] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  214.699194] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-usr: link becomes ready
[  214.705485] br-user: port 4(e-dhcp-usr) entered blocking state
[  214.710436] br-user: port 4(e-dhcp-usr) entered forwarding state
[  214.719932] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  214.725927] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-ntp: link becomes ready
[  214.735068] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  214.739491] br-ntp: port 3(e-dhcp-ntp) entered forwarding state
[  214.747888] eth-wifi: renamed from vethASOAF6
[  214.792657] eth-srv: renamed from veth71G2VP
[  214.831344] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  214.839173] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-vpn: link becomes ready
[  214.846913] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  214.851303] br-vpn: port 3(e-dhcp-vpn) entered forwarding state
[  214.858852] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  214.864763] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-wifi: link becomes ready
[  214.871336] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  214.876827] br-wifi: port 3(e-dhcp-wifi) entered forwarding state
[  214.884567] eth-trust: renamed from vethKU0W9O
[  214.924435] eth-foner: renamed from veth81MYI3
[  214.975335] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  214.982883] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-srv: link becomes ready
[  214.990161] br-service: port 4(e-dhcp-srv) entered blocking state
[  214.994897] br-service: port 4(e-dhcp-srv) entered forwarding state
[  215.005341] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  215.012615] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-trus: link becomes ready
[  215.012854] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  215.024254] br-trusted: port 3(e-dhcp-trus) entered forwarding state
[  215.031267] eth-fact: renamed from vethDJ4U9J
[  215.096469] eth-tst1: renamed from vethN0DU0B
[  215.136088] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  215.142659] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-fone: link becomes ready
[  215.152061] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  215.156814] br-fonera: port 3(e-dhcp-fone) entered forwarding state
[  215.159190] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  215.170143] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-fact: link becomes ready
[  215.177869] br-factory: port 3(e-dhcp-fact) entered blocking state
[  215.182682] br-factory: port 3(e-dhcp-fact) entered forwarding state
[  215.184833] eth-tst2: renamed from vethVHUJ14
[  215.244497] eth-tst3: renamed from vethQV06B7
[  215.279217] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  215.285162] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst1: link becomes ready
[  215.292826] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  215.297584] br-test-1: port 3(e-dhcp-tst1) entered forwarding state
[  215.330533] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  215.345196] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst2: link becomes ready
[  215.358920] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  215.363650] br-test-2: port 3(e-dhcp-tst2) entered forwarding state
[  215.384000] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  215.389742] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst3: link becomes ready
[  215.411525] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  215.416292] br-test-3: port 3(e-dhcp-tst3) entered forwarding state
[  215.518554] EXT4-fs (dm-95): recovery complete
[  215.531188] EXT4-fs (dm-95): mounted filesystem with ordered data mode. Opts: (null)
[  215.622753] EXT4-fs (dm-96): recovery complete
[  215.634298] EXT4-fs (dm-96): mounted filesystem with ordered data mode. Opts: (null)
[  215.718837] EXT4-fs (dm-97): recovery complete
[  215.730307] EXT4-fs (dm-97): mounted filesystem with ordered data mode. Opts: (null)
[  215.798729] EXT4-fs (dm-98): recovery complete
[  215.801748] EXT4-fs (dm-98): mounted filesystem with ordered data mode. Opts: (null)
[  216.042533] EXT4-fs (dm-77): re-mounted. Opts: (null)
[  216.046563] EXT4-fs (dm-99): recovery complete
[  216.066287] EXT4-fs (dm-99): mounted filesystem with ordered data mode. Opts: (null)
[  216.306607] EXT4-fs (dm-100): recovery complete
[  216.315404] EXT4-fs (dm-100): mounted filesystem with ordered data mode. Opts: (null)
[  216.380224] EXT4-fs (dm-101): recovery complete
[  216.390283] EXT4-fs (dm-101): mounted filesystem with ordered data mode. Opts: (null)
[  216.458509] EXT4-fs (dm-102): recovery complete
[  216.461598] EXT4-fs (dm-102): mounted filesystem with ordered data mode. Opts: (null)
[  216.601962] br-admin: port 5(e-sysl-adm) entered blocking state
[  216.606477] br-admin: port 5(e-sysl-adm) entered disabled state
[  216.606832] device e-sysl-adm entered promiscuous mode
[  216.619521] br-alarm: port 4(e-sysl-alar) entered blocking state
[  216.619526] br-alarm: port 4(e-sysl-alar) entered disabled state
[  216.631959] device e-sysl-alar entered promiscuous mode
[  216.637097] br-alarm: port 4(e-sysl-alar) entered blocking state
[  216.637104] br-alarm: port 4(e-sysl-alar) entered forwarding state
[  216.648763] br-user: port 5(e-sysl-usr) entered blocking state
[  216.648769] br-user: port 5(e-sysl-usr) entered disabled state
[  216.660702] device e-sysl-usr entered promiscuous mode
[  216.665950] br-user: port 5(e-sysl-usr) entered blocking state
[  216.671270] br-user: port 5(e-sysl-usr) entered forwarding state
[  216.681403] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  216.685782] br-ntp: port 4(e-sysl-ntp) entered disabled state
[  216.687021] device e-sysl-ntp entered promiscuous mode
[  216.697082] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  216.702314] br-ntp: port 4(e-sysl-ntp) entered forwarding state
[  216.713452] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  216.717829] br-vpn: port 4(e-sysl-vpn) entered disabled state
[  216.724436] device e-sysl-vpn entered promiscuous mode
[  216.729511] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  216.734344] br-vpn: port 4(e-sysl-vpn) entered forwarding state
[  216.746841] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  216.751393] br-wifi: port 4(e-sysl-wifi) entered disabled state
[  216.751964] device e-sysl-wifi entered promiscuous mode
[  216.763002] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  216.763009] br-wifi: port 4(e-sysl-wifi) entered forwarding state
[  216.785492] br-service: port 5(e-sysl-srv) entered blocking state
[  216.791679] br-service: port 5(e-sysl-srv) entered disabled state
[  216.798573] device e-sysl-srv entered promiscuous mode
[  216.802901] br-service: port 5(e-sysl-srv) entered blocking state
[  216.808386] br-service: port 5(e-sysl-srv) entered forwarding state
[  216.823424] br-trusted: port 4(e-sysl-trus) entered blocking state
[  216.823431] br-trusted: port 4(e-sysl-trus) entered disabled state
[  216.834697] device e-sysl-trus entered promiscuous mode
[  216.835224] br-trusted: port 4(e-sysl-trus) entered blocking state
[  216.845689] br-trusted: port 4(e-sysl-trus) entered forwarding state
[  216.867491] br-fonera: port 4(e-sysl-fone) entered blocking state
[  216.876013] br-fonera: port 4(e-sysl-fone) entered disabled state
[  216.881102] device e-sysl-fone entered promiscuous mode
[  216.888455] br-fonera: port 4(e-sysl-fone) entered blocking state
[  216.893115] br-fonera: port 4(e-sysl-fone) entered forwarding state
[  216.925243] br-factory: port 4(e-sysl-fact) entered blocking state
[  216.925252] br-factory: port 4(e-sysl-fact) entered disabled state
[  216.925579] device e-sysl-fact entered promiscuous mode
[  216.946144] br-factory: port 4(e-sysl-fact) entered blocking state
[  216.950937] br-factory: port 4(e-sysl-fact) entered forwarding state
[  216.972261] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  216.976983] br-test-1: port 4(e-sysl-tst1) entered disabled state
[  216.977735] device e-sysl-tst1 entered promiscuous mode
[  216.991715] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  216.996405] br-test-1: port 4(e-sysl-tst1) entered forwarding state
[  217.021913] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  217.026625] br-test-2: port 4(e-sysl-tst2) entered disabled state
[  217.027514] device e-sysl-tst2 entered promiscuous mode
[  217.045759] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  217.050436] br-test-2: port 4(e-sysl-tst2) entered forwarding state
[  217.075093] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  217.075105] br-test-3: port 4(e-sysl-tst3) entered disabled state
[  217.088432] device e-sysl-tst3 entered promiscuous mode
[  217.093315] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  217.093324] br-test-3: port 4(e-sysl-tst3) entered forwarding state
[  217.658605] br-alarm: port 4(e-sysl-alar) entered disabled state
[  217.666736] br-user: port 5(e-sysl-usr) entered disabled state
[  217.671601] br-ntp: port 4(e-sysl-ntp) entered disabled state
[  217.696702] br-vpn: port 4(e-sysl-vpn) entered disabled state
[  217.710350] br-wifi: port 4(e-sysl-wifi) entered disabled state
[  217.717530] br-service: port 5(e-sysl-srv) entered disabled state
[  217.751002] br-trusted: port 4(e-sysl-trus) entered disabled state
[  217.756320] br-fonera: port 4(e-sysl-fone) entered disabled state
[  217.762349] br-factory: port 4(e-sysl-fact) entered disabled state
[  217.781263] br-test-1: port 4(e-sysl-tst1) entered disabled state
[  217.794930] br-test-2: port 4(e-sysl-tst2) entered disabled state
[  217.806605] br-test-3: port 4(e-sysl-tst3) entered disabled state
[  218.044426] EXT4-fs (dm-85): couldn't mount as ext3 due to feature incompatibilities
[  218.092826] EXT4-fs (dm-85): recovery complete
[  218.102371] EXT4-fs (dm-85): mounted filesystem with ordered data mode. Opts: (null)
[  218.110044] eth-admin: renamed from veth3GJ3FJ
[  218.193417] eth-alarm: renamed from vethPP01D7
[  218.245199] eth-user: renamed from veth450SQX
[  218.311464] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  218.317724] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-adm: link becomes ready
[  218.325062] br-admin: port 5(e-sysl-adm) entered blocking state
[  218.329673] br-admin: port 5(e-sysl-adm) entered forwarding state
[  218.340216] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  218.346943] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-alar: link becomes ready
[  218.355021] br-alarm: port 4(e-sysl-alar) entered blocking state
[  218.359698] br-alarm: port 4(e-sysl-alar) entered forwarding state
[  218.370366] eth-ntp: renamed from vethVW98AF
[  218.400629] eth-vpn: renamed from vethE3HN67
[  218.447297] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  218.460060] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-usr: link becomes ready
[  218.467608] br-user: port 5(e-sysl-usr) entered blocking state
[  218.472092] br-user: port 5(e-sysl-usr) entered forwarding state
[  218.484273] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  218.490972] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-ntp: link becomes ready
[  218.496741] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  218.502171] br-ntp: port 4(e-sysl-ntp) entered forwarding state
[  218.522660] eth-wifi: renamed from vethWDKGE7
[  218.553235] eth-srv: renamed from vethJ2OA4W
[  218.596437] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  218.603177] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-vpn: link becomes ready
[  218.610045] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  218.614431] br-vpn: port 4(e-sysl-vpn) entered forwarding state
[  218.626863] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  218.635767] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-wifi: link becomes ready
[  218.641730] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  218.647188] br-wifi: port 4(e-sysl-wifi) entered forwarding state
[  218.660485] eth-trust: renamed from vethU9WN8R
[  218.700738] eth-foner: renamed from vethL4N9OL
[  218.743652] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  218.749584] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-srv: link becomes ready
[  218.758324] br-service: port 5(e-sysl-srv) entered blocking state
[  218.763035] br-service: port 5(e-sysl-srv) entered forwarding state
[  218.771566] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  218.777544] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-trus: link becomes ready
[  218.787356] br-trusted: port 4(e-sysl-trus) entered blocking state
[  218.789811] EXT4-fs (dm-95): re-mounted. Opts: (null)
[  218.792178] br-trusted: port 4(e-sysl-trus) entered forwarding state
[  218.808731] eth-fact: renamed from vethDAW0N5
[  218.856770] eth-tst1: renamed from vethHCWCMB
[  218.899847] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  218.906873] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-fone: link becomes ready
[  218.912765] br-fonera: port 4(e-sysl-fone) entered blocking state
[  218.918422] br-fonera: port 4(e-sysl-fone) entered forwarding state
[  218.927157] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  218.932914] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-fact: link becomes ready
[  218.941864] br-factory: port 4(e-sysl-fact) entered blocking state
[  218.946705] br-factory: port 4(e-sysl-fact) entered forwarding state
[  218.961846] eth-tst2: renamed from vethF8CUVT
[  219.020859] eth-tst3: renamed from vethXQTWMA
[  219.071752] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  219.079553] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst1: link becomes ready
[  219.085508] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  219.091135] br-test-1: port 4(e-sysl-tst1) entered forwarding state
[  219.098811] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  219.107407] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst2: link becomes ready
[  219.114638] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  219.119369] br-test-2: port 4(e-sysl-tst2) entered forwarding state
[  219.128051] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  219.140098] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst3: link becomes ready
[  219.164844] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  219.169607] br-test-3: port 4(e-sysl-tst3) entered forwarding state
[  219.218891] EXT4-fs (dm-86): recovery complete
[  219.228451] EXT4-fs (dm-86): mounted filesystem with ordered data mode. Opts: (null)
[  219.276170] EXT4-fs (dm-87): recovery complete
[  219.285154] EXT4-fs (dm-87): mounted filesystem with ordered data mode. Opts: (null)
[  219.344901] EXT4-fs (dm-88): recovery complete
[  219.354021] EXT4-fs (dm-88): mounted filesystem with ordered data mode. Opts: (null)
[  219.390947] EXT4-fs (dm-89): recovery complete
[  219.393983] EXT4-fs (dm-89): mounted filesystem with ordered data mode. Opts: (null)
[  219.456115] EXT4-fs (dm-90): recovery complete
[  219.465178] EXT4-fs (dm-90): mounted filesystem with ordered data mode. Opts: (null)
[  219.559511] EXT4-fs (dm-91): recovery complete
[  219.568541] EXT4-fs (dm-91): mounted filesystem with ordered data mode. Opts: (null)
[  219.616298] EXT4-fs (dm-92): recovery complete
[  219.619848] EXT4-fs (dm-92): mounted filesystem with ordered data mode. Opts: (null)
[  219.645692] EXT4-fs (dm-93): recovery complete
[  219.648820] EXT4-fs (dm-93): mounted filesystem with ordered data mode. Opts: (null)
[  219.785701] br-admin: port 6(e-ntp-adm) entered blocking state
[  219.790181] br-admin: port 6(e-ntp-adm) entered disabled state
[  219.796327] device e-ntp-adm entered promiscuous mode
[  219.819704] br-alarm: port 5(e-ntp-alar) entered blocking state
[  219.824264] br-alarm: port 5(e-ntp-alar) entered disabled state
[  219.824946] device e-ntp-alar entered promiscuous mode
[  219.835886] br-alarm: port 5(e-ntp-alar) entered blocking state
[  219.841166] br-alarm: port 5(e-ntp-alar) entered forwarding state
[  219.858032] br-user: port 6(e-ntp-usr) entered blocking state
[  219.862631] br-user: port 6(e-ntp-usr) entered disabled state
[  219.863057] device e-ntp-usr entered promiscuous mode
[  219.863759] br-user: port 6(e-ntp-usr) entered blocking state
[  219.863770] br-user: port 6(e-ntp-usr) entered forwarding state
[  219.880570] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  219.880581] br-ntp: port 5(e-ntp-ntp) entered disabled state
[  219.880900] device e-ntp-ntp entered promiscuous mode
[  219.881511] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  219.881521] br-ntp: port 5(e-ntp-ntp) entered forwarding state
[  219.903937] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  219.903945] br-vpn: port 5(e-ntp-vpn) entered disabled state
[  219.904283] device e-ntp-vpn entered promiscuous mode
[  219.904974] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  219.947276] br-vpn: port 5(e-ntp-vpn) entered forwarding state
[  219.968881] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  219.974807] br-wifi: port 5(e-ntp-wifi) entered disabled state
[  219.987010] device e-ntp-wifi entered promiscuous mode
[  219.991509] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  219.996527] br-wifi: port 5(e-ntp-wifi) entered forwarding state
[  220.029969] br-service: port 6(e-ntp-srv) entered blocking state
[  220.038766] br-service: port 6(e-ntp-srv) entered disabled state
[  220.043789] device e-ntp-srv entered promiscuous mode
[  220.052736] br-service: port 6(e-ntp-srv) entered blocking state
[  220.057315] br-service: port 6(e-ntp-srv) entered forwarding state
[  220.090782] br-trusted: port 5(e-ntp-trus) entered blocking state
[  220.096350] br-trusted: port 5(e-ntp-trus) entered disabled state
[  220.102623] device e-ntp-trus entered promiscuous mode
[  220.107222] br-trusted: port 5(e-ntp-trus) entered blocking state
[  220.112712] br-trusted: port 5(e-ntp-trus) entered forwarding state
[  220.142403] br-fonera: port 5(e-ntp-fone) entered blocking state
[  220.149021] br-fonera: port 5(e-ntp-fone) entered disabled state
[  220.154641] device e-ntp-fone entered promiscuous mode
[  220.159380] br-fonera: port 5(e-ntp-fone) entered blocking state
[  220.159387] br-fonera: port 5(e-ntp-fone) entered forwarding state
[  220.178907] br-factory: port 5(e-ntp-fact) entered blocking state
[  220.178915] br-factory: port 5(e-ntp-fact) entered disabled state
[  220.179280] device e-ntp-fact entered promiscuous mode
[  220.180193] br-factory: port 5(e-ntp-fact) entered blocking state
[  220.180201] br-factory: port 5(e-ntp-fact) entered forwarding state
[  220.221910] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  220.221918] br-test-1: port 5(e-ntp-tst1) entered disabled state
[  220.223783] device e-ntp-tst1 entered promiscuous mode
[  220.243480] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  220.248074] br-test-1: port 5(e-ntp-tst1) entered forwarding state
[  220.292310] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  220.314305] br-test-2: port 5(e-ntp-tst2) entered disabled state
[  220.319765] device e-ntp-tst2 entered promiscuous mode
[  220.325274] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  220.329987] br-test-2: port 5(e-ntp-tst2) entered forwarding state
[  220.376124] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  220.386068] br-test-3: port 5(e-ntp-tst3) entered disabled state
[  220.391683] device e-ntp-tst3 entered promiscuous mode
[  220.396706] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  220.401761] br-test-3: port 5(e-ntp-tst3) entered forwarding state
[  220.872394] br-alarm: port 5(e-ntp-alar) entered disabled state
[  220.877438] br-user: port 6(e-ntp-usr) entered disabled state
[  220.887015] br-ntp: port 5(e-ntp-ntp) entered disabled state
[  220.934776] br-vpn: port 5(e-ntp-vpn) entered disabled state
[  220.945273] br-wifi: port 5(e-ntp-wifi) entered disabled state
[  220.961326] br-service: port 6(e-ntp-srv) entered disabled state
[  220.985583] br-trusted: port 5(e-ntp-trus) entered disabled state
[  220.995534] br-fonera: port 5(e-ntp-fone) entered disabled state
[  221.003419] br-factory: port 5(e-ntp-fact) entered disabled state
[  221.009929] br-test-1: port 5(e-ntp-tst1) entered disabled state
[  221.024556] br-test-2: port 5(e-ntp-tst2) entered disabled state
[  221.031693] br-test-3: port 5(e-ntp-tst3) entered disabled state
[  221.398430] EXT4-fs (dm-56): couldn't mount as ext3 due to feature incompatibilities
[  221.569513] EXT4-fs (dm-56): recovery complete
[  221.594316] EXT4-fs (dm-56): mounted filesystem with ordered data mode. Opts: (null)
[  221.608486] eth-admin: renamed from vethABPQBA
[  221.656522] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  221.663135] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-adm: link becomes ready
[  221.670971] br-admin: port 6(e-ntp-adm) entered blocking state
[  221.675421] br-admin: port 6(e-ntp-adm) entered forwarding state
[  221.701614] eth-alarm: renamed from vethJTL0X6
[  221.767223] eth-user: renamed from vethLQ5VR9
[  221.822771] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  221.831356] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-alar: link becomes ready
[  221.838070] br-alarm: port 5(e-ntp-alar) entered blocking state
[  221.842695] br-alarm: port 5(e-ntp-alar) entered forwarding state
[  221.852212] eth-ntp: renamed from vethUV6G4W
[  221.912723] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  221.919340] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-usr: link becomes ready
[  221.925287] br-user: port 6(e-ntp-usr) entered blocking state
[  221.930440] br-user: port 6(e-ntp-usr) entered forwarding state
[  221.952117] eth-vpn: renamed from vethHC2NQ7
[  222.013379] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  222.020683] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-ntp: link becomes ready
[  222.032392] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  222.036698] br-ntp: port 5(e-ntp-ntp) entered forwarding state
[  222.056168] eth-wifi: renamed from vethTSI9GT
[  222.111293] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  222.117054] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-vpn: link becomes ready
[  222.125590] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  222.129904] br-vpn: port 5(e-ntp-vpn) entered forwarding state
[  222.152277] eth-srv: renamed from vethJDIBRL
[  222.251631] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  222.257636] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-wifi: link becomes ready
[  222.265037] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  222.269535] br-wifi: port 5(e-ntp-wifi) entered forwarding state
[  222.300076] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  222.307303] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-srv: link becomes ready
[  222.313142] br-service: port 6(e-ntp-srv) entered blocking state
[  222.318616] br-service: port 6(e-ntp-srv) entered forwarding state
[  222.343735] eth-trust: renamed from veth4KJ5XV
[  222.413199] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  222.419166] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-trus: link becomes ready
[  222.430778] br-trusted: port 5(e-ntp-trus) entered blocking state
[  222.435520] br-trusted: port 5(e-ntp-trus) entered forwarding state
[  222.456074] eth-foner: renamed from vethOKXGYU
[  222.497414] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  222.503393] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-fone: link becomes ready
[  222.509948] br-fonera: port 5(e-ntp-fone) entered blocking state
[  222.515460] br-fonera: port 5(e-ntp-fone) entered forwarding state
[  222.518929] eth-fact: renamed from vethIDS96I
[  222.637106] eth-tst1: renamed from vethPHP8J0
[  222.712420] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  222.719194] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-fact: link becomes ready
[  222.726157] br-factory: port 5(e-ntp-fact) entered blocking state
[  222.730884] br-factory: port 5(e-ntp-fact) entered forwarding state
[  222.753074] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  222.759530] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst1: link becomes ready
[  222.759851] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  222.771061] br-test-1: port 5(e-ntp-tst1) entered forwarding state
[  222.779875] eth-tst2: renamed from vethJA1L81
[  222.830909] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  222.839251] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst2: link becomes ready
[  222.845253] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  222.850660] br-test-2: port 5(e-ntp-tst2) entered forwarding state
[  222.869273] eth-tst3: renamed from vethI5SW7K
[  222.913623] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  222.919435] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst3: link becomes ready
[  222.927040] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  222.929892] EXT4-fs (dm-86): re-mounted. Opts: (null)
[  222.931668] br-test-3: port 5(e-ntp-tst3) entered forwarding state
[  223.042962] EXT4-fs (dm-57): recovery complete
[  223.054470] EXT4-fs (dm-57): mounted filesystem with ordered data mode. Opts: (null)
[  223.136442] EXT4-fs (dm-58): recovery complete
[  223.153812] EXT4-fs (dm-58): mounted filesystem with ordered data mode. Opts: (null)
[  223.240731] EXT4-fs (dm-59): recovery complete
[  223.254305] EXT4-fs (dm-59): mounted filesystem with ordered data mode. Opts: (null)
[  223.292466] EXT4-fs (dm-60): recovery complete
[  223.295567] EXT4-fs (dm-60): mounted filesystem with ordered data mode. Opts: (null)
[  223.422124] EXT4-fs (dm-61): recovery complete
[  223.434299] EXT4-fs (dm-61): mounted filesystem with ordered data mode. Opts: (null)
[  223.631023] EXT4-fs (dm-62): recovery complete
[  223.642299] EXT4-fs (dm-62): mounted filesystem with ordered data mode. Opts: (null)
[  223.679728] EXT4-fs (dm-63): recovery complete
[  223.684245] EXT4-fs (dm-63): mounted filesystem with ordered data mode. Opts: (null)
[  223.734504] EXT4-fs (dm-64): recovery complete
[  223.737512] EXT4-fs (dm-64): mounted filesystem with ordered data mode. Opts: (null)
[  223.901803] br-admin: port 7(e-mmon-adm) entered blocking state
[  223.906313] br-admin: port 7(e-mmon-adm) entered disabled state
[  223.907036] device e-mmon-adm entered promiscuous mode
[  223.936779] br-user: port 7(e-mmon-usr) entered blocking state
[  223.936786] br-user: port 7(e-mmon-usr) entered disabled state
[  223.947435] device e-mmon-usr entered promiscuous mode
[  223.953116] br-user: port 7(e-mmon-usr) entered blocking state
[  223.957909] br-user: port 7(e-mmon-usr) entered forwarding state
[  223.977664] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  223.982181] br-wifi: port 6(e-mmon-wifi) entered disabled state
[  223.988451] device e-mmon-wifi entered promiscuous mode
[  223.994023] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  223.999148] br-wifi: port 6(e-mmon-wifi) entered forwarding state
[  224.017993] br-service: port 7(e-mmon-srv) entered blocking state
[  224.023590] br-service: port 7(e-mmon-srv) entered disabled state
[  224.029128] device e-mmon-srv entered promiscuous mode
[  224.034662] br-service: port 7(e-mmon-srv) entered blocking state
[  224.039913] br-service: port 7(e-mmon-srv) entered forwarding state
[  224.076008] br-factory: port 6(e-mmon-fact) entered blocking state
[  224.080891] br-factory: port 6(e-mmon-fact) entered disabled state
[  224.081357] device e-mmon-fact entered promiscuous mode
[  224.093131] br-factory: port 6(e-mmon-fact) entered blocking state
[  224.093147] br-factory: port 6(e-mmon-fact) entered forwarding state
[  224.433077] EXT4-fs (dm-37): couldn't mount as ext3 due to feature incompatibilities
[  224.954558] br-user: port 7(e-mmon-usr) entered disabled state
[  224.959563] br-wifi: port 6(e-mmon-wifi) entered disabled state
[  224.966015] br-service: port 7(e-mmon-srv) entered disabled state
[  224.980849] br-factory: port 6(e-mmon-fact) entered disabled state
[  224.994922] EXT4-fs (dm-37): recovery complete
[  225.025420] EXT4-fs (dm-37): mounted filesystem with ordered data mode. Opts: (null)
[  225.067304] eth-admin: renamed from veth8QTQ57
[  225.110129] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  225.116048] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-adm: link becomes ready
[  225.123436] br-admin: port 7(e-mmon-adm) entered blocking state
[  225.128144] br-admin: port 7(e-mmon-adm) entered forwarding state
[  225.135584] eth-user: renamed from vethMNJTEP
[  225.203965] eth-wifi: renamed from veth925NDJ
[  225.259074] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  225.264731] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-usr: link becomes ready
[  225.271326] br-user: port 7(e-mmon-usr) entered blocking state
[  225.276863] br-user: port 7(e-mmon-usr) entered forwarding state
[  225.305259] eth-srv: renamed from vethQ519EW
[  225.346486] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  225.352115] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-wifi: link becomes ready
[  225.358825] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  225.364441] br-wifi: port 6(e-mmon-wifi) entered forwarding state
[  225.379758] eth-fact: renamed from vethO6AVPN
[  225.434899] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  225.440353] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-srv: link becomes ready
[  225.447061] br-service: port 7(e-mmon-srv) entered blocking state
[  225.452870] br-service: port 7(e-mmon-srv) entered forwarding state
[  225.467895] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  225.473528] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-fact: link becomes ready
[  225.480701] br-factory: port 6(e-mmon-fact) entered blocking state
[  225.486132] br-factory: port 6(e-mmon-fact) entered forwarding state
[  225.566640] EXT4-fs (dm-38): recovery complete
[  225.578299] EXT4-fs (dm-38): mounted filesystem with ordered data mode. Opts: (null)
[  225.862794] EXT4-fs (dm-39): recovery complete
[  225.880619] EXT4-fs (dm-39): mounted filesystem with ordered data mode. Opts: (null)
[  225.986540] EXT4-fs (dm-40): recovery complete
[  225.998314] EXT4-fs (dm-40): mounted filesystem with ordered data mode. Opts: (null)
[  226.102709] EXT4-fs (dm-41): recovery complete
[  226.114479] EXT4-fs (dm-41): mounted filesystem with ordered data mode. Opts: (null)
[  226.182690] EXT4-fs (dm-42): recovery complete
[  226.185703] EXT4-fs (dm-42): mounted filesystem with ordered data mode. Opts: (null)
[  226.462583] EXT4-fs (dm-43): recovery complete
[  226.486303] EXT4-fs (dm-43): mounted filesystem with ordered data mode. Opts: (null)
[  226.866715] EXT4-fs (dm-44): recovery complete
[  226.886316] EXT4-fs (dm-44): mounted filesystem with ordered data mode. Opts: (null)
[  226.986657] EXT4-fs (dm-45): recovery complete
[  226.989672] EXT4-fs (dm-45): mounted filesystem with ordered data mode. Opts: (null)
[  227.018582] EXT4-fs (dm-57): re-mounted. Opts: (null)
[  227.086632] EXT4-fs (dm-46): recovery complete
[  227.089632] EXT4-fs (dm-46): mounted filesystem with ordered data mode. Opts: (null)
[  227.296710] br-admin: port 8(e-fire-adm) entered blocking state
[  227.301241] br-admin: port 8(e-fire-adm) entered disabled state
[  227.301717] device e-fire-adm entered promiscuous mode
[  227.328587] br-alarm: port 6(e-fire-alar) entered blocking state
[  227.333217] br-alarm: port 6(e-fire-alar) entered disabled state
[  227.340027] device e-fire-alar entered promiscuous mode
[  227.345348] br-alarm: port 6(e-fire-alar) entered blocking state
[  227.350351] br-alarm: port 6(e-fire-alar) entered forwarding state
[  227.367534] br-user: port 8(e-fire-usr) entered blocking state
[  227.371959] br-user: port 8(e-fire-usr) entered disabled state
[  227.372764] device e-fire-usr entered promiscuous mode
[  227.387698] br-user: port 8(e-fire-usr) entered blocking state
[  227.387706] br-user: port 8(e-fire-usr) entered forwarding state
[  227.408218] br-ntp: port 6(e-fire-ntp) entered blocking state
[  227.412554] br-ntp: port 6(e-fire-ntp) entered disabled state
[  227.413440] device e-fire-ntp entered promiscuous mode
[  227.424643] br-ntp: port 6(e-fire-ntp) entered blocking state
[  227.429113] br-ntp: port 6(e-fire-ntp) entered forwarding state
[  227.450748] br-vpn: port 6(e-fire-vpn) entered blocking state
[  227.457112] br-vpn: port 6(e-fire-vpn) entered disabled state
[  227.462496] device e-fire-vpn entered promiscuous mode
[  227.467227] br-vpn: port 6(e-fire-vpn) entered blocking state
[  227.472259] br-vpn: port 6(e-fire-vpn) entered forwarding state
[  227.501626] br-wifi: port 7(e-fire-wifi) entered blocking state
[  227.506172] br-wifi: port 7(e-fire-wifi) entered disabled state
[  227.512924] device e-fire-wifi entered promiscuous mode
[  227.513607] br-wifi: port 7(e-fire-wifi) entered blocking state
[  227.513615] br-wifi: port 7(e-fire-wifi) entered forwarding state
[  227.534456] br-service: port 8(e-fire-srv) entered blocking state
[  227.545709] br-service: port 8(e-fire-srv) entered disabled state
[  227.552306] device e-fire-srv entered promiscuous mode
[  227.560013] br-service: port 8(e-fire-srv) entered blocking state
[  227.564704] br-service: port 8(e-fire-srv) entered forwarding state
[  227.606979] br-test-1: port 6(e-fire-tst1) entered blocking state
[  227.615255] br-test-1: port 6(e-fire-tst1) entered disabled state
[  227.621891] device e-fire-tst1 entered promiscuous mode
[  227.627700] br-test-1: port 6(e-fire-tst1) entered blocking state
[  227.632367] br-test-1: port 6(e-fire-tst1) entered forwarding state
[  227.672033] br-test-2: port 6(e-fire-tst2) entered blocking state
[  227.679791] br-test-2: port 6(e-fire-tst2) entered disabled state
[  227.680217] device e-fire-tst2 entered promiscuous mode
[  227.680865] br-test-2: port 6(e-fire-tst2) entered blocking state
[  227.680873] br-test-2: port 6(e-fire-tst2) entered forwarding state
[  227.719986] br-test-3: port 6(e-fire-tst3) entered blocking state
[  227.719994] br-test-3: port 6(e-fire-tst3) entered disabled state
[  227.720407] device e-fire-tst3 entered promiscuous mode
[  227.720982] br-test-3: port 6(e-fire-tst3) entered blocking state
[  227.720991] br-test-3: port 6(e-fire-tst3) entered forwarding state
[  227.748416] br-trusted: port 6(e-fire-trus) entered blocking state
[  227.748424] br-trusted: port 6(e-fire-trus) entered disabled state
[  227.748797] device e-fire-trus entered promiscuous mode
[  227.749381] br-trusted: port 6(e-fire-trus) entered blocking state
[  227.749390] br-trusted: port 6(e-fire-trus) entered forwarding state
[  227.786803] br-fonera: port 6(e-fire-fone) entered blocking state
[  227.838007] br-fonera: port 6(e-fire-fone) entered disabled state
[  227.847124] device e-fire-fone entered promiscuous mode
[  227.857127] br-fonera: port 6(e-fire-fone) entered blocking state
[  227.861798] br-fonera: port 6(e-fire-fone) entered forwarding state
[  227.912125] br-wan: port 2(e-fire-wan) entered blocking state
[  227.922789] br-wan: port 2(e-fire-wan) entered disabled state
[  227.923175] device e-fire-wan entered promiscuous mode
[  227.923916] br-wan: port 2(e-fire-wan) entered blocking state
[  227.923925] br-wan: port 2(e-fire-wan) entered forwarding state
[  227.969720] br-factory: port 7(e-fire-fact) entered blocking state
[  227.969731] br-factory: port 7(e-fire-fact) entered disabled state
[  227.970071] device e-fire-fact entered promiscuous mode
[  228.015435] br-factory: port 7(e-fire-fact) entered blocking state
[  228.015445] br-factory: port 7(e-fire-fact) entered forwarding state
[  228.420226] br-alarm: port 6(e-fire-alar) entered disabled state
[  228.425433] br-user: port 8(e-fire-usr) entered disabled state
[  228.433523] br-ntp: port 6(e-fire-ntp) entered disabled state
[  228.566812] br-vpn: port 6(e-fire-vpn) entered disabled state
[  228.618322] br-wifi: port 7(e-fire-wifi) entered disabled state
[  228.625307] br-service: port 8(e-fire-srv) entered disabled state
[  228.661296] br-test-1: port 6(e-fire-tst1) entered disabled state
[  228.679020] br-test-2: port 6(e-fire-tst2) entered disabled state
[  228.687095] br-test-3: port 6(e-fire-tst3) entered disabled state
[  228.695991] br-trusted: port 6(e-fire-trus) entered disabled state
[  228.701363] br-fonera: port 6(e-fire-fone) entered disabled state
[  228.717865] br-wan: port 2(e-fire-wan) entered disabled state
[  228.723856] br-factory: port 7(e-fire-fact) entered disabled state
[  229.172690] EXT4-fs (dm-9): couldn't mount as ext3 due to feature incompatibilities
[  229.352607] EXT4-fs (dm-9): recovery complete
[  229.359099] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
[  229.375515] eth-admin: renamed from vethL4VBAH
[  229.429437] eth-alarm: renamed from vethQ78YEJ
[  229.476937] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  229.483898] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-adm: link becomes ready
[  229.489921] br-admin: port 8(e-fire-adm) entered blocking state
[  229.495195] br-admin: port 8(e-fire-adm) entered forwarding state
[  229.507240] eth-user: renamed from vethXWMO0A
[  229.576862] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  229.583529] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-alar: link becomes ready
[  229.591887] br-alarm: port 6(e-fire-alar) entered blocking state
[  229.596563] br-alarm: port 6(e-fire-alar) entered forwarding state
[  229.605874] eth-ntp: renamed from vethSRAKAE
[  229.657113] eth-vpn: renamed from vethMXK709
[  229.703474] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  229.709347] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-usr: link becomes ready
[  229.718463] br-user: port 8(e-fire-usr) entered blocking state
[  229.722936] br-user: port 8(e-fire-usr) entered forwarding state
[  229.723305] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  229.723755] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-ntp: link becomes ready
[  229.745405] br-ntp: port 6(e-fire-ntp) entered blocking state
[  229.745418] br-ntp: port 6(e-fire-ntp) entered forwarding state
[  229.768283] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  229.775134] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-vpn: link becomes ready
[  229.780971] br-vpn: port 6(e-fire-vpn) entered blocking state
[  229.786295] br-vpn: port 6(e-fire-vpn) entered forwarding state
[  229.794554] eth-wifi: renamed from vethNDKQFQ
[  229.865771] eth-srv: renamed from veth1VGX58
[  229.928655] eth-tst1: renamed from veth5UX41N
[  229.977862] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  229.984636] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-wifi: link becomes ready
[  229.992295] br-wifi: port 7(e-fire-wifi) entered blocking state
[  229.996874] br-wifi: port 7(e-fire-wifi) entered forwarding state
[  230.000653] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  230.011500] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-srv: link becomes ready
[  230.018308] br-service: port 8(e-fire-srv) entered blocking state
[  230.018322] br-service: port 8(e-fire-srv) entered forwarding state
[  230.032794] eth-tst2: renamed from vethDUOWPQ
[  230.071305] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  230.077093] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst1: link becomes ready
[  230.084790] br-test-1: port 6(e-fire-tst1) entered blocking state
[  230.089513] br-test-1: port 6(e-fire-tst1) entered forwarding state
[  230.098008] eth-tst3: renamed from veth91O9BL
[  230.140785] eth-trust: renamed from vethQWG385
[  230.183455] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  230.189341] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst2: link becomes ready
[  230.197536] br-test-2: port 6(e-fire-tst2) entered blocking state
[  230.202306] br-test-2: port 6(e-fire-tst2) entered forwarding state
[  230.203725] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  230.217869] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst3: link becomes ready
[  230.225607] br-test-3: port 6(e-fire-tst3) entered blocking state
[  230.230342] br-test-3: port 6(e-fire-tst3) entered forwarding state
[  230.243263] eth-foner: renamed from vethGX0Y3C
[  230.278121] eth-wan: renamed from veth7IK6AS
[  230.324271] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  230.332182] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-trus: link becomes ready
[  230.338185] br-trusted: port 6(e-fire-trus) entered blocking state
[  230.343835] br-trusted: port 6(e-fire-trus) entered forwarding state
[  230.344063] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  230.359240] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-fone: link becomes ready
[  230.365855] br-fonera: port 6(e-fire-fone) entered blocking state
[  230.370826] br-fonera: port 6(e-fire-fone) entered forwarding state
[  230.375751] eth-fact: renamed from veth6FM7QW
[  230.421236] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wan: link becomes ready
[  230.427041] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-wan: link becomes ready
[  230.435405] br-wan: port 2(e-fire-wan) entered blocking state
[  230.439823] br-wan: port 2(e-fire-wan) entered forwarding state
[  230.444216] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  230.452962] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-fact: link becomes ready
[  230.453338] br-factory: port 7(e-fire-fact) entered blocking state
[  230.453351] br-factory: port 7(e-fire-fact) entered forwarding state
[  230.488662] EXT4-fs (dm-10): recovery complete
[  230.493602] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
[  230.516784] EXT4-fs (dm-11): recovery complete
[  230.521999] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
[  230.554911] EXT4-fs (dm-12): recovery complete
[  230.559624] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
[  230.578960] EXT4-fs (dm-13): recovery complete
[  230.581971] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
[  230.675325] EXT4-fs (dm-14): recovery complete
[  230.680016] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
[  230.734376] EXT4-fs (dm-15): recovery complete
[  230.739019] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
[  230.755677] EXT4-fs (dm-16): recovery complete
[  230.758765] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: (null)
[  230.775528] EXT4-fs (dm-17): recovery complete
[  230.778613] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: (null)
[  230.889594] br-admin: port 9(e-auth-adm) entered blocking state
[  230.895174] br-admin: port 9(e-auth-adm) entered disabled state
[  230.901063] device e-auth-adm entered promiscuous mode
[  230.922890] br-user: port 9(e-auth-usr) entered blocking state
[  230.927286] br-user: port 9(e-auth-usr) entered disabled state
[  230.933986] device e-auth-usr entered promiscuous mode
[  230.939123] br-user: port 9(e-auth-usr) entered blocking state
[  230.944032] br-user: port 9(e-auth-usr) entered forwarding state
[  230.966805] br-wifi: port 8(e-auth-wifi) entered blocking state
[  230.971297] br-wifi: port 8(e-auth-wifi) entered disabled state
[  230.971684] device e-auth-wifi entered promiscuous mode
[  230.982959] br-wifi: port 8(e-auth-wifi) entered blocking state
[  230.982967] br-wifi: port 8(e-auth-wifi) entered forwarding state
[  231.016464] br-service: port 9(e-auth-srv) entered blocking state
[  231.021391] br-service: port 9(e-auth-srv) entered disabled state
[  231.021943] device e-auth-srv entered promiscuous mode
[  231.024465] br-service: port 9(e-auth-srv) entered blocking state
[  231.024474] br-service: port 9(e-auth-srv) entered forwarding state
[  231.047157] br-factory: port 8(e-auth-fact) entered blocking state
[  231.060581] br-factory: port 8(e-auth-fact) entered disabled state
[  231.065681] device e-auth-fact entered promiscuous mode
[  231.073117] br-factory: port 8(e-auth-fact) entered blocking state
[  231.077887] br-factory: port 8(e-auth-fact) entered forwarding state
[  231.554338] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[  231.907079] br-user: port 9(e-auth-usr) entered disabled state
[  231.912056] br-wifi: port 8(e-auth-wifi) entered disabled state
[  231.926951] EXT4-fs (dm-0): recovery complete
[  231.946322] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  231.962587] br-service: port 9(e-auth-srv) entered disabled state
[  231.968602] br-factory: port 8(e-auth-fact) entered disabled state
[  231.986317] eth-admin: renamed from vethOX6D4T
[  232.096043] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  232.101981] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-adm: link becomes ready
[  232.109495] br-admin: port 9(e-auth-adm) entered blocking state
[  232.114080] br-admin: port 9(e-auth-adm) entered forwarding state
[  232.131504] eth-user: renamed from veth28XHFU
[  232.212831] eth-wifi: renamed from veth9KCRP2
[  232.259117] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  232.264776] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-usr: link becomes ready
[  232.271584] br-user: port 9(e-auth-usr) entered blocking state
[  232.276944] br-user: port 9(e-auth-usr) entered forwarding state
[  232.286742] eth-srv: renamed from vethSVBHSY
[  232.319096] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  232.324735] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-wifi: link becomes ready
[  232.331468] br-wifi: port 8(e-auth-wifi) entered blocking state
[  232.337078] br-wifi: port 8(e-auth-wifi) entered forwarding state
[  232.353919] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  232.359548] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-srv: link becomes ready
[  232.370715] br-service: port 9(e-auth-srv) entered blocking state
[  232.375486] br-service: port 9(e-auth-srv) entered forwarding state
[  232.382687] eth-fact: renamed from vethDAM41E
[  232.435205] EXT4-fs (dm-10): re-mounted. Opts: (null)
[  232.435748] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  232.445952] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-fact: link becomes ready
[  232.458022] br-factory: port 8(e-auth-fact) entered blocking state
[  232.462848] br-factory: port 8(e-auth-fact) entered forwarding state
[  232.550545] EXT4-fs (dm-1): recovery complete
[  232.562318] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  232.644694] EXT4-fs (dm-2): recovery complete
[  232.658313] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  232.739029] EXT4-fs (dm-3): recovery complete
[  232.746315] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[  232.806130] EXT4-fs (dm-4): recovery complete
[  232.814402] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[  233.030621] EXT4-fs (dm-5): recovery complete
[  233.038388] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[  233.162684] EXT4-fs (dm-6): recovery complete
[  233.170312] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[  233.226972] EXT4-fs (dm-7): recovery complete
[  233.229910] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[  233.293586] EXT4-fs (dm-8): recovery complete
[  233.300314] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[  233.484943] br-admin: port 10(e-nfs-adm) entered blocking state
[  233.489430] br-admin: port 10(e-nfs-adm) entered disabled state
[  233.496206] device e-nfs-adm entered promiscuous mode
[  233.518173] br-user: port 10(e-nfs-usr) entered blocking state
[  233.522623] br-user: port 10(e-nfs-usr) entered disabled state
[  233.523055] device e-nfs-usr entered promiscuous mode
[  233.534616] br-user: port 10(e-nfs-usr) entered blocking state
[  233.539219] br-user: port 10(e-nfs-usr) entered forwarding state
[  233.563011] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  233.567498] br-wifi: port 9(e-nfs-wifi) entered disabled state
[  233.568250] device e-nfs-wifi entered promiscuous mode
[  233.578929] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  233.578937] br-wifi: port 9(e-nfs-wifi) entered forwarding state
[  233.611582] br-service: port 10(e-nfs-srv) entered blocking state
[  233.616275] br-service: port 10(e-nfs-srv) entered disabled state
[  233.617225] device e-nfs-srv entered promiscuous mode
[  233.635148] br-service: port 10(e-nfs-srv) entered blocking state
[  233.639839] br-service: port 10(e-nfs-srv) entered forwarding state
[  233.677651] br-factory: port 9(e-nfs-fact) entered blocking state
[  233.683768] br-factory: port 9(e-nfs-fact) entered disabled state
[  233.684131] device e-nfs-fact entered promiscuous mode
[  233.684754] br-factory: port 9(e-nfs-fact) entered blocking state
[  233.684763] br-factory: port 9(e-nfs-fact) entered forwarding state
[  233.797378] EXT4-fs (dm-38): re-mounted. Opts: (null)
[  234.090933] EXT4-fs (dm-18): couldn't mount as ext3 due to feature incompatibilities
[  234.219480] EXT4-fs (dm-18): recovery complete
[  234.226845] eth-admin: renamed from vethEFW0A3
[  234.264446] eth-user: renamed from veth3DHR8A
[  234.299745] br-user: port 10(e-nfs-usr) entered disabled state
[  234.304712] br-wifi: port 9(e-nfs-wifi) entered disabled state
[  234.311183] br-service: port 10(e-nfs-srv) entered disabled state
[  234.338959] br-factory: port 9(e-nfs-fact) entered disabled state
[  234.343965] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  234.351984] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-adm: link becomes ready
[  234.357531] br-admin: port 10(e-nfs-adm) entered blocking state
[  234.363168] br-admin: port 10(e-nfs-adm) entered forwarding state
[  234.376590] eth-wifi: renamed from veth9PHUD5
[  234.420283] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-usr: link becomes ready
[  234.425969] br-user: port 10(e-nfs-usr) entered blocking state
[  234.431370] br-user: port 10(e-nfs-usr) entered forwarding state
[  234.441115] eth-srv: renamed from vethHPNGD0
[  234.492185] eth-fact: renamed from vethNBWGB5
[  234.539372] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-wifi: link becomes ready
[  234.545816] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  234.550553] br-wifi: port 9(e-nfs-wifi) entered forwarding state
[  234.568977] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-srv: link becomes ready
[  234.574648] br-service: port 10(e-nfs-srv) entered blocking state
[  234.580331] br-service: port 10(e-nfs-srv) entered forwarding state
[  234.617508] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  234.623503] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-fact: link becomes ready
[  234.633989] br-factory: port 9(e-nfs-fact) entered blocking state
[  234.638651] br-factory: port 9(e-nfs-fact) entered forwarding state
[  234.675170] EXT4-fs (dm-19): recovery complete
[  234.720334] EXT4-fs (dm-20): recovery complete
[  234.765338] EXT4-fs (dm-21): recovery complete
[  234.787992] EXT4-fs (dm-22): recovery complete
[  234.958180] EXT4-fs (dm-23): recovery complete
[  235.071922] EXT4-fs (dm-24): recovery complete
[  235.079970] EXT4-fs (dm-25): recovery complete
[  235.087644] EXT4-fs (dm-26): recovery complete
[  235.094896] EXT4-fs (dm-27): recovery complete
[  235.185159] br-admin: port 11(e-bust-adm) entered blocking state
[  235.189802] br-admin: port 11(e-bust-adm) entered disabled state
[  235.196128] device e-bust-adm entered promiscuous mode
[  235.197352] br-admin: port 11(e-bust-adm) entered blocking state
[  235.206795] br-admin: port 11(e-bust-adm) entered forwarding state
[  235.225738] br-user: port 11(e-bust-usr) entered blocking state
[  235.230274] br-user: port 11(e-bust-usr) entered disabled state
[  235.231238] device e-bust-usr entered promiscuous mode
[  235.241933] br-user: port 11(e-bust-usr) entered blocking state
[  235.247138] br-user: port 11(e-bust-usr) entered forwarding state
[  235.267867] br-service: port 11(e-bust-srv) entered blocking state
[  235.272628] br-service: port 11(e-bust-srv) entered disabled state
[  235.273532] device e-bust-srv entered promiscuous mode
[  235.284630] br-service: port 11(e-bust-srv) entered blocking state
[  235.290068] br-service: port 11(e-bust-srv) entered forwarding state
[  235.325477] br-factory: port 10(e-bust-fact) entered blocking state
[  235.330337] br-factory: port 10(e-bust-fact) entered disabled state
[  235.331257] device e-bust-fact entered promiscuous mode
[  235.344043] br-factory: port 10(e-bust-fact) entered blocking state
[  235.348902] br-factory: port 10(e-bust-fact) entered forwarding state
[  235.582970] br-admin: port 11(e-bust-adm) entered disabled state
[  235.588551] br-user: port 11(e-bust-usr) entered disabled state
[  235.592734] EXT4-fs (dm-47): couldn't mount as ext3 due to feature incompatibilities
[  235.601589] br-service: port 11(e-bust-srv) entered disabled state
[  235.610647] br-factory: port 10(e-bust-fact) entered disabled state
[  235.718701] EXT4-fs (dm-47): recovery complete
[  235.731349] eth-admin: renamed from vethPXL0HN
[  235.787656] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  235.793385] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-adm: link becomes ready
[  235.800065] br-admin: port 11(e-bust-adm) entered blocking state
[  235.805658] br-admin: port 11(e-bust-adm) entered forwarding state
[  235.820635] eth-user: renamed from vethUVYDGA
[  235.865796] eth-srv: renamed from veth3LB0QI
[  235.914801] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  235.920338] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-usr: link becomes ready
[  235.927758] br-user: port 11(e-bust-usr) entered blocking state
[  235.932660] br-user: port 11(e-bust-usr) entered forwarding state
[  235.971032] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  235.976611] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-srv: link becomes ready
[  235.983489] br-service: port 11(e-bust-srv) entered blocking state
[  235.989044] br-service: port 11(e-bust-srv) entered forwarding state
[  236.005978] eth-fact: renamed from veth9L4CVF
[  236.047258] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  236.052797] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-fact: link becomes ready
[  236.059812] br-factory: port 10(e-bust-fact) entered blocking state
[  236.065528] br-factory: port 10(e-bust-fact) entered forwarding state
[  236.188741] EXT4-fs (dm-48): recovery complete
[  236.263516] EXT4-fs (dm-49): recovery complete
[  236.342574] EXT4-fs (dm-50): recovery complete
[  236.377958] EXT4-fs (dm-51): recovery complete
[  236.472556] EXT4-fs (dm-19): re-mounted. Opts: (null)
[  236.518145] EXT4-fs (dm-52): recovery complete
[  236.702153] EXT4-fs (dm-53): recovery complete
[  236.723988] EXT4-fs (dm-54): recovery complete
[  236.734129] EXT4-fs (dm-55): recovery complete
[  236.854356] br-admin: port 12(e-ownc-adm) entered blocking state
[  236.859311] br-admin: port 12(e-ownc-adm) entered disabled state
[  236.865275] device e-ownc-adm entered promiscuous mode
[  236.887404] br-user: port 12(e-ownc-usr) entered blocking state
[  236.892207] br-user: port 12(e-ownc-usr) entered disabled state
[  236.898318] device e-ownc-usr entered promiscuous mode
[  236.899993] br-user: port 12(e-ownc-usr) entered blocking state
[  236.908783] br-user: port 12(e-ownc-usr) entered forwarding state
[  236.933960] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  236.939542] br-wifi: port 10(e-ownc-wifi) entered disabled state
[  236.945487] device e-ownc-wifi entered promiscuous mode
[  236.950798] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  236.950806] br-wifi: port 10(e-ownc-wifi) entered forwarding state
[  236.977339] br-service: port 12(e-ownc-srv) entered blocking state
[  236.983123] br-service: port 12(e-ownc-srv) entered disabled state
[  236.989266] device e-ownc-srv entered promiscuous mode
[  237.000873] br-service: port 12(e-ownc-srv) entered blocking state
[  237.005642] br-service: port 12(e-ownc-srv) entered forwarding state
[  237.044336] br-factory: port 11(e-ownc-fact) entered blocking state
[  237.050515] br-factory: port 11(e-ownc-fact) entered disabled state
[  237.055777] device e-ownc-fact entered promiscuous mode
[  237.057379] br-factory: port 11(e-ownc-fact) entered blocking state
[  237.066851] br-factory: port 11(e-ownc-fact) entered forwarding state
[  237.442524] EXT4-fs (dm-65): couldn't mount as ext3 due to feature incompatibilities
[  237.696560] EXT4-fs (dm-65): recovery complete
[  237.705516] eth-admin: renamed from veth3PE5YI
[  237.771478] br-user: port 12(e-ownc-usr) entered disabled state
[  237.781631] br-wifi: port 10(e-ownc-wifi) entered disabled state
[  237.798376] br-service: port 12(e-ownc-srv) entered disabled state
[  237.804423] br-factory: port 11(e-ownc-fact) entered disabled state
[  237.809923] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  237.816783] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-adm: link becomes ready
[  237.824073] br-admin: port 12(e-ownc-adm) entered blocking state
[  237.828850] br-admin: port 12(e-ownc-adm) entered forwarding state
[  237.845936] eth-user: renamed from vethX9J6IQ
[  237.890273] eth-wifi: renamed from veth7NVOWM
[  237.944085] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  237.949903] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-usr: link becomes ready
[  237.958136] br-user: port 12(e-ownc-usr) entered blocking state
[  237.962712] br-user: port 12(e-ownc-usr) entered forwarding state
[  237.975190] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  237.980968] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-wifi: link becomes ready
[  237.990753] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  237.995390] br-wifi: port 10(e-ownc-wifi) entered forwarding state
[  238.005171] eth-srv: renamed from vethJI0CSL
[  238.058591] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  238.064420] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-srv: link becomes ready
[  238.073971] br-service: port 12(e-ownc-srv) entered blocking state
[  238.078814] br-service: port 12(e-ownc-srv) entered forwarding state
[  238.083038] eth-fact: renamed from vethBSLEKC
[  238.175606] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  238.181573] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-fact: link becomes ready
[  238.188900] br-factory: port 11(e-ownc-fact) entered blocking state
[  238.193966] br-factory: port 11(e-ownc-fact) entered forwarding state
[  238.346675] EXT4-fs (dm-66): recovery complete
[  238.407864] EXT4-fs (dm-67): recovery complete
[  238.464764] EXT4-fs (dm-68): 6 orphan inodes deleted
[  238.472593] EXT4-fs (dm-68): recovery complete
[  238.550892] EXT4-fs (dm-69): recovery complete
[  238.594561] EXT4-fs (dm-48): re-mounted. Opts: (null)
[  238.802867] EXT4-fs (dm-70): recovery complete
[  238.943047] EXT4-fs (dm-71): recovery complete
[  238.996326] EXT4-fs (dm-72): recovery complete
[  239.058614] EXT4-fs (dm-73): recovery complete
[  239.120722] EXT4-fs (dm-74): recovery complete
[  239.189961] EXT4-fs (dm-75): recovery complete
[  239.365125] br-admin: port 13(e-vpn-adm) entered blocking state
[  239.370082] br-admin: port 13(e-vpn-adm) entered disabled state
[  239.371409] device e-vpn-adm entered promiscuous mode
[  239.391687] EXT4-fs (dm-1): re-mounted. Opts: (null)
[  239.415524] br-user: port 13(e-vpn-usr) entered blocking state
[  239.420884] br-user: port 13(e-vpn-usr) entered disabled state
[  239.428608] device e-vpn-usr entered promiscuous mode
[  239.435368] br-user: port 13(e-vpn-usr) entered blocking state
[  239.439890] br-user: port 13(e-vpn-usr) entered forwarding state
[  239.489762] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  239.489776] br-vpn: port 7(e-vpn-vpn) entered disabled state
[  239.500820] device e-vpn-vpn entered promiscuous mode
[  239.505779] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  239.510446] br-vpn: port 7(e-vpn-vpn) entered forwarding state
[  239.543295] br-service: port 13(e-vpn-srv) entered blocking state
[  239.547961] br-service: port 13(e-vpn-srv) entered disabled state
[  239.563947] device e-vpn-srv entered promiscuous mode
[  239.568857] br-service: port 13(e-vpn-srv) entered blocking state
[  239.573661] br-service: port 13(e-vpn-srv) entered forwarding state
[  239.632790] br-factory: port 12(e-vpn-fact) entered blocking state
[  239.639773] br-factory: port 12(e-vpn-fact) entered disabled state
[  239.645863] device e-vpn-fact entered promiscuous mode
[  239.650803] br-factory: port 12(e-vpn-fact) entered blocking state
[  239.655780] br-factory: port 12(e-vpn-fact) entered forwarding state
[  239.989009] EXT4-fs (dm-103): couldn't mount as ext3 due to feature incompatibilities
[  240.172142] EXT4-fs (dm-103): recovery complete
[  240.180253] eth-admin: renamed from vethAHMFD7
[  240.229634] eth-user: renamed from veth8QRD6V
[  240.284543] br-user: port 13(e-vpn-usr) entered disabled state
[  240.290276] br-vpn: port 7(e-vpn-vpn) entered disabled state
[  240.296326] br-service: port 13(e-vpn-srv) entered disabled state
[  240.304068] br-factory: port 12(e-vpn-fact) entered disabled state
[  240.309452] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  240.318901] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-adm: link becomes ready
[  240.324811] br-admin: port 13(e-vpn-adm) entered blocking state
[  240.330164] br-admin: port 13(e-vpn-adm) entered forwarding state
[  240.362725] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-usr: link becomes ready
[  240.368606] br-user: port 13(e-vpn-usr) entered blocking state
[  240.373927] br-user: port 13(e-vpn-usr) entered forwarding state
[  240.384463] eth-vpn: renamed from vethDH36YK
[  240.408527] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  240.414420] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-vpn: link becomes ready
[  240.420970] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  240.426028] br-vpn: port 7(e-vpn-vpn) entered forwarding state
[  240.438275] eth-srv: renamed from vethMU2Y9C
[  240.490194] eth-fact: renamed from vethUW867L
[  240.549591] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  240.555465] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-srv: link becomes ready
[  240.562008] br-service: port 13(e-vpn-srv) entered blocking state
[  240.567499] br-service: port 13(e-vpn-srv) entered forwarding state
[  240.590460] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  240.596393] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-fact: link becomes ready
[  240.603933] br-factory: port 12(e-vpn-fact) entered blocking state
[  240.608794] br-factory: port 12(e-vpn-fact) entered forwarding state
[  240.661985] EXT4-fs (dm-104): recovery complete
[  240.701465] EXT4-fs (dm-105): recovery complete
[  240.763669] EXT4-fs (dm-106): recovery complete
[  240.788455] EXT4-fs (dm-107): recovery complete
[  240.941633] EXT4-fs (dm-108): recovery complete
[  241.003484] EXT4-fs (dm-109): recovery complete
[  241.022400] EXT4-fs (dm-110): recovery complete
[  241.042510] EXT4-fs (dm-111): recovery complete
[  241.156755] br-admin: port 14(e-ssh-adm) entered blocking state
[  241.161296] br-admin: port 14(e-ssh-adm) entered disabled state
[  241.162023] device e-ssh-adm entered promiscuous mode
[  241.172700] br-admin: port 14(e-ssh-adm) entered blocking state
[  241.178061] br-admin: port 14(e-ssh-adm) entered forwarding state
[  241.205541] br-user: port 14(e-ssh-usr) entered blocking state
[  241.209967] br-user: port 14(e-ssh-usr) entered disabled state
[  241.211058] device e-ssh-usr entered promiscuous mode
[  241.221725] br-user: port 14(e-ssh-usr) entered blocking state
[  241.226599] br-user: port 14(e-ssh-usr) entered forwarding state
[  241.254700] br-service: port 14(e-ssh-srv) entered blocking state
[  241.259402] br-service: port 14(e-ssh-srv) entered disabled state
[  241.259801] device e-ssh-srv entered promiscuous mode
[  241.271112] br-service: port 14(e-ssh-srv) entered blocking state
[  241.276525] br-service: port 14(e-ssh-srv) entered forwarding state
[  241.312829] br-factory: port 13(e-ssh-fact) entered blocking state
[  241.319496] br-factory: port 13(e-ssh-fact) entered disabled state
[  241.324699] device e-ssh-fact entered promiscuous mode
[  241.330057] br-factory: port 13(e-ssh-fact) entered blocking state
[  241.335513] br-factory: port 13(e-ssh-fact) entered forwarding state
[  241.367088] br-admin: port 14(e-ssh-adm) entered disabled state
[  241.374058] br-user: port 14(e-ssh-usr) entered disabled state
[  241.379163] br-service: port 14(e-ssh-srv) entered disabled state
[  241.385253] br-factory: port 13(e-ssh-fact) entered disabled state
[  241.659625] EXT4-fs (dm-112): couldn't mount as ext3 due to feature incompatibilities
[  241.977023] EXT4-fs (dm-112): recovery complete
[  242.003019] EXT4-fs mount: 39 callbacks suppressed
[  242.003036] EXT4-fs (dm-112): mounted filesystem with ordered data mode. Opts: (null)
[  242.088345] eth-admin: renamed from vethATCOQV
[  242.169629] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  242.175616] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-adm: link becomes ready
[  242.184996] br-admin: port 14(e-ssh-adm) entered blocking state
[  242.189580] br-admin: port 14(e-ssh-adm) entered forwarding state
[  242.209428] eth-user: renamed from vethCG4YGT
[  242.281704] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  242.287500] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-usr: link becomes ready
[  242.294497] br-user: port 14(e-ssh-usr) entered blocking state
[  242.299450] br-user: port 14(e-ssh-usr) entered forwarding state
[  242.312073] eth-srv: renamed from vethK6SXEQ
[  242.358074] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  242.363859] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-srv: link becomes ready
[  242.371639] br-service: port 14(e-ssh-srv) entered blocking state
[  242.376422] br-service: port 14(e-ssh-srv) entered forwarding state
[  242.380499] eth-fact: renamed from vethJA50CQ
[  242.442817] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  242.448684] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-fact: link becomes ready
[  242.455452] br-factory: port 13(e-ssh-fact) entered blocking state
[  242.460998] br-factory: port 13(e-ssh-fact) entered forwarding state
[  242.548492] EXT4-fs (dm-66): re-mounted. Opts: (null)
[  242.581371] EXT4-fs (dm-113): recovery complete
[  242.610061] EXT4-fs (dm-113): mounted filesystem with ordered data mode. Opts: (null)
[  242.686476] EXT4-fs (dm-114): recovery complete
[  242.691832] EXT4-fs (dm-114): mounted filesystem with ordered data mode. Opts: (null)
[  242.774798] EXT4-fs (dm-115): recovery complete
[  242.782320] EXT4-fs (dm-115): mounted filesystem with ordered data mode. Opts: (null)
[  242.838964] EXT4-fs (dm-116): recovery complete
[  242.842066] EXT4-fs (dm-116): mounted filesystem with ordered data mode. Opts: (null)
[  243.017128] NFSD: attempt to initialize umh client tracking in a container ignored.
[  243.033281] NFSD: attempt to initialize legacy client tracking in a container ignored.
[  243.037599] EXT4-fs (dm-117): recovery complete
[  243.041079] NFSD: Unable to initialize client recovery tracking! (-22)
[  243.058361] NFSD: starting 90-second grace period (net f000092d)
[  243.062327] EXT4-fs (dm-117): mounted filesystem with ordered data mode. Opts: (null)
[  243.378825] EXT4-fs (dm-118): recovery complete
[  243.390368] EXT4-fs (dm-118): mounted filesystem with ordered data mode. Opts: (null)
[  243.449387] EXT4-fs (dm-119): recovery complete
[  243.452562] EXT4-fs (dm-119): mounted filesystem with ordered data mode. Opts: (null)
[  243.533719] EXT4-fs (dm-104): re-mounted. Opts: (null)
[  243.541101] EXT4-fs (dm-120): recovery complete
[  243.544271] EXT4-fs (dm-120): mounted filesystem with ordered data mode. Opts: (null)
[  243.752149] br-admin: port 15(s-stre-adm) entered blocking state
[  243.757002] br-admin: port 15(s-stre-adm) entered disabled state
[  243.763139] device s-stre-adm entered promiscuous mode
[  243.794301] br-user: port 15(s-stre-usr) entered blocking state
[  243.798880] br-user: port 15(s-stre-usr) entered disabled state
[  243.806935] device s-stre-usr entered promiscuous mode
[  243.827221] br-user: port 15(s-stre-usr) entered blocking state
[  243.827230] br-user: port 15(s-stre-usr) entered forwarding state
[  243.867530] br-service: port 15(s-stre-srv) entered blocking state
[  243.872353] br-service: port 15(s-stre-srv) entered disabled state
[  243.872751] device s-stre-srv entered promiscuous mode
[  243.886061] br-service: port 15(s-stre-srv) entered blocking state
[  243.890824] br-service: port 15(s-stre-srv) entered forwarding state
[  243.930716] br-factory: port 14(s-stre-fact) entered blocking state
[  243.936162] br-factory: port 14(s-stre-fact) entered disabled state
[  243.936508] device s-stre-fact entered promiscuous mode
[  243.937701] br-factory: port 14(s-stre-fact) entered blocking state
[  243.937710] br-factory: port 14(s-stre-fact) entered forwarding state
[  244.182891] EXT4-fs (dm-28): couldn't mount as ext3 due to feature incompatibilities
[  244.315747] EXT4-fs (dm-28): recovery complete
[  244.321656] EXT4-fs (dm-28): mounted filesystem with ordered data mode. Opts: (null)
[  244.328848] eth-admin: renamed from veth26APRJ
[  244.378731] br-user: port 15(s-stre-usr) entered disabled state
[  244.383862] br-service: port 15(s-stre-srv) entered disabled state
[  244.390133] br-factory: port 14(s-stre-fact) entered disabled state
[  244.407341] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  244.413613] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-adm: link becomes ready
[  244.419744] br-admin: port 15(s-stre-adm) entered blocking state
[  244.425361] br-admin: port 15(s-stre-adm) entered forwarding state
[  244.434971] eth-user: renamed from vethVXJU5R
[  244.481536] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-usr: link becomes ready
[  244.488069] br-user: port 15(s-stre-usr) entered blocking state
[  244.492817] br-user: port 15(s-stre-usr) entered forwarding state
[  244.503650] eth-srv: renamed from vethTMSLA5
[  244.553090] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-srv: link becomes ready
[  244.558956] br-service: port 15(s-stre-srv) entered blocking state
[  244.564623] br-service: port 15(s-stre-srv) entered forwarding state
[  244.572970] eth-fact: renamed from veth5J6LTW
[  244.623731] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-fact: link becomes ready
[  244.629556] br-factory: port 14(s-stre-fact) entered blocking state
[  244.635444] br-factory: port 14(s-stre-fact) entered forwarding state
[  244.705376] EXT4-fs (dm-29): recovery complete
[  244.723335] EXT4-fs (dm-29): mounted filesystem with ordered data mode. Opts: (null)
[  244.788321] EXT4-fs (dm-30): recovery complete
[  244.797555] EXT4-fs (dm-30): mounted filesystem with ordered data mode. Opts: (null)
[  244.906604] EXT4-fs (dm-31): recovery complete
[  244.918806] EXT4-fs (dm-31): mounted filesystem with ordered data mode. Opts: (null)
[  244.958384] EXT4-fs (dm-32): recovery complete
[  244.963335] EXT4-fs (dm-32): mounted filesystem with ordered data mode. Opts: (null)
[  245.147053] EXT4-fs (dm-33): recovery complete
[  245.154664] EXT4-fs (dm-33): mounted filesystem with ordered data mode. Opts: (null)
[  245.318680] EXT4-fs (dm-34): recovery complete
[  245.323044] EXT4-fs (dm-34): mounted filesystem with ordered data mode. Opts: (null)
[  245.341802] EXT4-fs (dm-35): recovery complete
[  245.344970] EXT4-fs (dm-35): mounted filesystem with ordered data mode. Opts: (null)
[  245.362895] EXT4-fs (dm-36): recovery complete
[  245.365880] EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: (null)
[  246.204430] EXT4-fs (dm-29): re-mounted. Opts: (null)

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: [  247.903078] EXT4-fs (dm-113): re-mounted. Opts: (null)

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: root
Password: 

Login incorrect
srv-hc1-110 login: root
Password: [  260.800741] br-wifi: port 1(eth-wifi) entered blocking state
[  260.826306] br-wifi: port 1(eth-wifi) entered disabled state
[  260.846869] device eth-wifi entered promiscuous mode
[  260.998697] br-wifi: port 1(eth-wifi) entered blocking state
[  261.003006] br-wifi: port 1(eth-wifi) entered forwarding state

Last login: Sat Jan  1 00:04:57 UTC 2000 on ttySAC2
[  263.968534] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  263.991333] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  263.996625] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[  264.005542] cfg80211: failed to load regulatory.db
/etc/update-motd.d/30-armbian-sysinfo: line 44: bc: command not found
  ___      _           _     _  __  ___   _ _  _   
 / _ \  __| |_ __ ___ (_) __| | \ \/ / | | | || |  
| | | |/ _` | '__/ _ \| |/ _` |  \  /| | | | || |_ 
| |_| | (_| | | | (_) | | (_| |  /  \| |_| |__   _|
 \___/ \__,_|_|  \___/|_|\__,_| /_/\_\\___/   |_|  
                                                   

Welcome to ARMBIAN 5.72 stable Debian GNU/Linux 9 (stretch) 5.0.0   
System load:   19.16 5.98 2.08  	Up time:       4 min		
Memory usage:  16 % of 1993MB 	IP:            192.168.57.65 192.168.54.65 192.168.56.65
CPU temp:      49°C           	
Usage of /:    20% of 15G    	

- Jean Marc :) -

jeanmarc
Posts: 11
Joined: Tue Mar 05, 2019 9:02 pm
languages_spoken: english
ODROIDs: 2 Odroid HC1 boards with 250 GB SSD disk with standard kernel.org kernel Odroid N2 board
Location: near Paris
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by jeanmarc » Thu Mar 14, 2019 6:52 am

Hi,
Sorry, i have a bad news, after some hours, i have following messages into console ...
:evil:

Code: Select all

[ 1440.169663] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37                                                            
[ 5782.128434] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37                                                            
[ 6495.624208] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37                                                            
[ 9241.121795] xhci-hcd xhci-hcd.0.auto: ERROR unknown event type 37                          
Following information about smartcl....

Code: Select all


root@srv-hc1-110:~# smartctl -a /dev/sda -d sat 
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-5.0.0] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KingDian S280 240GB
Serial Number:    2018032302667
Firmware Version: Q0720A
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 13 21:57:43 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x71) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   2) minutes.
Conveyance self-test routine
recommended polling time:        (   1) minutes.
SCT capabilities:              (0x0035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      -       0
  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      -       725
 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      -       345
160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       86
163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       10
164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       34926
165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       45
166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       20
168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1000
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       98
175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age   Offline      -       0
176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age   Offline      -       0
177 Wear_Leveling_Count     0x0000   100   100   050    Old_age   Offline      -       145
178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age   Offline      -       0
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      -       62
194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      -       49
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      -       0
196 Reallocated_Event_Count 0x0000   100   100   016    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age   Offline      -       0
232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      -       100
241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       96107
242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      -       196907
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       139704

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
    6        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

If you have an idea ?
- Jean Marc :) -

User avatar
memeka
Posts: 4313
Joined: Mon May 20, 2013 10:22 am
languages_spoken: english
ODROIDs: XU rev2 + eMMC + UART
U3 + eMMC + IO Shield + UART
Has thanked: 0
Been thanked: 12 times
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by memeka » Thu Mar 14, 2019 7:09 am

The error is from the USB subsystem. It looks like it’s dropping some packets. It’s more like a warning than an error I think. Changing jmicron firmware won’t fix this issue.
Try kernel 5.0 and see if issue is fixed there.

Edit - try with my fork of 5.0, not armbian :)
viewtopic.php?t=33510

jeanmarc
Posts: 11
Joined: Tue Mar 05, 2019 9:02 pm
languages_spoken: english
ODROIDs: 2 Odroid HC1 boards with 250 GB SSD disk with standard kernel.org kernel Odroid N2 board
Location: near Paris
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by jeanmarc » Sat Mar 16, 2019 3:42 pm

Hi Memeka,

Thank you for your suggestion.
After reading your boot log file, I do not see a hard drive connected on the target, is it exact ?

http://paste.ubuntu.com/p/NrJ3Dh9tw9/


Could you tell it the changes made in your kernel version ?

Please find below my boot log on kernel 5.0.1
The current Debian version is 9.8

Code: Select all


U-Boot 2017.05-armbian (Jan 11 2019 - 10:29:28 +0100) for ODROID-XU4

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU4 based on EXYNOS5422
Board: Odroid XU4 based on EXYNOS5422
Type:  xu4
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
MMC Device 0 ( SD ): 14.8 GiB
Card did not respond to voltage select!
mmc_init: -95, time 11
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Press quickly 'Enter' twice to stop autoboot:  1  0 
** Unrecognized filesystem type **
** File not found /boot.ini **
12488 bytes read in 25 ms (487.3 KiB/s)
cfgload addr = 0x50000000, Loading boot.ini from ext4 0:1 /boot/boot.ini
cfgload: applying boot.ini...
cfgload: setenv initrd_high "0xffffffff"
cfgload: setenv fdt_high "0xffffffff"
cfgload: setenv macaddr "00:1e:06:61:7a:55"
cfgload: setenv rootdev "UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5"
cfgload: setenv rootfstype "ext4"
cfgload: setenv console "both"
cfgload: setenv verbosity "7"
cfgload: if ext4load mmc 0:1 0x44000000 /boot/armbianEnv.txt || fatload mmc 0:1 0x44000000 armbianEnv.txt || ext4load mmc 0:1 0x44000000 armbianEnv.txt; then env import -t 0x44000000 ${filesize}; fi
379 bytes read in 33 ms (10.7 KiB/s)
cfgload: if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
cfgload: if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttySAC2,115200n8 ${consoleargs}"; fi
cfgload: setenv bootrootfs "${consoleargs} consoleblank=0 loglevel=${verbosity} panic=10 root=${rootdev} rootfstype=${rootfstype} rootwait rw"
cfgload: setenv vout "hdmi"
cfgload: setenv cecenable "false" # false or true
cfgload: setenv governor "performance"
cfgload: setenv ddr_freq 825
cfgload: setenv HPD "true"
cfgload: setenv hdmi_tx_amp_lvl  "31"
cfgload: setenv hdmi_tx_lvl_ch0      "3"
cfgload: setenv hdmi_tx_lvl_ch1      "3"
cfgload: setenv hdmi_tx_lvl_ch2      "3"
cfgload: setenv hdmi_tx_emp_lvl      "6"
cfgload: setenv hdmi_clk_amp_lvl     "31"
cfgload: setenv hdmi_tx_res      "0"
cfgload: setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
cfgload: ext4load mmc 0:1 0x40008000 /boot/zImage || fatload mmc 0:1 0x40008000 zImage || ext4load mmc 0:1 0x40008000 zImage
6050824 bytes read in 483 ms (11.9 MiB/s)
cfgload: ext4load mmc 0:1 0x42000000 /boot/uInitrd || fatload mmc 0:1 0x42000000 uInitrd || ext4load mmc 0:1 0x42000000 uInitrd
6827576 bytes read in 533 ms (12.2 MiB/s)
cfgload: if test "${board_name}" = "xu4"; then setenv fdtfile "exynos5422-odroidxu4.dtb"; fi
cfgload: if test "${board_name}" = "xu3"; then setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
cfgload: if test "${board_name}" = "xu3l"; then setenv fdtfile "exynos5422-odroidxu3-lite.dtb"; fi
cfgload: if test "${board_name}" = "hc1"; then setenv fdtfile "exynos5422-odroidhc1.dtb"; fi
cfgload: if ext4load mmc 0:1 0x00000000 "/boot/.next" || fatload mmc 0:1 0x00000000 ".next"  || ext4load mmc 0:1 0x00000000 ".next"; then echo "Found mainline kernel configuration"; else setenv fdtfile "exynos5422-odroidxu3.dtb"; fi
0 bytes read in 16 ms (0 Bytes/s)
Found mainline kernel configuration
cfgload: ext4load mmc 0:1 0x44000000 /boot/dtb/${fdtfile} || fatload mmc 0:1 0x44000000 dtb/${fdtfile} || ext4load mmc 0:1 0x44000000 dtb/${fdtfile}
54344 bytes read in 52 ms (1020.5 KiB/s)
cfgload: fdt addr 0x44000000
cfgload: if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
cfgload: dmc ${ddr_freq}
cfgload: bootz 0x40008000 0x42000000 0x44000000
Kernel image @ 0x40008000 [ 0x000000 - 0x5c5408 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    6827512 Bytes = 6.5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 44000000
   Booting using the fdt blob at 0x44000000
   Using Device Tree in place at 44000000, end 44010447

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 5.0.1 (jean-marc_lacroix@vm-stretch-armhf-110) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Fri Mar 15 18:29:10 CET 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid HC1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] Running under secure firmware.
[    0.000000] random: get_random_bytes called from start_kernel+0xa0/0x4a4 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s42636 r8192 d22900 u73728
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=ttySAC2,115200n8 console=tty1 consoleblank=0 loglevel=7 panic=10 root=UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5 rootfstype=ext4 rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  s5p_mfc.mem=16M
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1902628K/2074624K available (9216K kernel code, 759K rwdata, 2392K rodata, 1024K init, 318K bss, 40924K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 760 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 319 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000032] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001454] Console: colour dummy device 80x30
[    0.002132] printk: console [tty1] enabled
[    0.002188] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002230] pid_max: default: 32768 minimum: 301
[    0.002449] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002491] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003469] CPU: Testing write buffer coherency: ok
[    0.004060] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.028056] Setting up static identity map for 0x40100000 - 0x40100060
[    0.028405] ARM CCI driver probed
[    0.028654] Exynos MCPM support installed
[    0.035992] rcu: Hierarchical SRCU implementation.
[    0.051989] smp: Bringing up secondary CPUs ...
[    0.084367] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.116330] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.148329] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.180362] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.180370] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.212344] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.212352] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.244333] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.244340] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.276333] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.276341] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.276578] smp: Brought up 1 node, 8 CPUs
[    0.276629] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.276655] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[    0.276684] CPU: This may indicate a broken bootloader or firmware.
[    0.278114] devtmpfs: initialized
[    0.296691] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    0.297270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.297325] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.304121] pinctrl core: initialized pinctrl subsystem
[    0.307054] NET: Registered protocol family 16
[    0.309747] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.311287] audit: initializing netlink subsys (disabled)
[    0.311628] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
[    0.312559] cpuidle: using governor menu
[    0.313534] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.313570] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.363022] EXYNOS5420 PMU initialized
[    0.404343] random: fast init done
[    0.462475] SCSI subsystem initialized
[    0.462758] usbcore: registered new interface driver usbfs
[    0.462844] usbcore: registered new interface driver hub
[    0.463033] usbcore: registered new device driver usb
[    0.463812] media: Linux media interface: v0.10
[    0.463877] videodev: Linux video capture interface: v2.00
[    0.464598] Advanced Linux Sound Architecture Driver Initialized.
[    0.466156] clocksource: Switched to clocksource mct-frc
[    1.037185] VFS: Disk quotas dquot_6.6.0
[    1.037271] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.052216] NET: Registered protocol family 2
[    1.052935] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.052985] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.053076] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.053244] TCP: Hash tables configured (established 8192 bind 8192)
[    1.053354] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.053406] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.053639] NET: Registered protocol family 1
[    1.054477] RPC: Registered named UNIX socket transport module.
[    1.054501] RPC: Registered udp transport module.
[    1.054584] RPC: Registered tcp transport module.
[    1.054605] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.054834] Trying to unpack rootfs image as initramfs...
[    1.455422] Freeing initrd memory: 6668K
[    1.456852] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.457647] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.462017] Initialise system trusted keyrings
[    1.462343] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.471313] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.472130] NFS: Registering the id_resolver key type
[    1.472177] Key type id_resolver registered
[    1.472197] Key type id_legacy registered
[    1.472227] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.472282] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.549880] Key type asymmetric registered
[    1.549907] Asymmetric key parser 'x509' registered
[    1.549977] bounce: pool size: 64 pages
[    1.550037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.550368] io scheduler mq-deadline registered
[    1.550391] io scheduler kyber registered
[    1.552830] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    1.552933] samsung-usb2-phy 12130000.phy: Linked as a consumer to regulator.0
[    1.553785] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    1.553879] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[    1.553915] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    1.554361] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    1.554473] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[    1.554509] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    1.562492] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.562522] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.565167] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.565194] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.566057] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    1.566085] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.641420] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.643619] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    1.644042] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    1.644460] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    2.536968] printk: console [ttySAC2] enabled
[    2.541660] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    2.551706] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[    2.558703] iommu: Adding device 10850000.g2d to group 0
[    2.562596] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    2.569957] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    2.578725] iommu: Adding device 11c00000.rotator to group 1
[    2.582968] exynos-rotator 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.593299] [drm] Exynos DRM: using 10850000.g2d device for DMA mapping operations
[    2.599497] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[    2.607675] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0a6436c)
[    2.614175] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[    2.622573] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0a64bf8)
[    2.629412] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.635998] [drm] No driver support for vblank timestamp query.
[    2.642568] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[    2.661821] brd: module loaded
[    2.676472] loop: module loaded
[    2.678888] libphy: Fixed MDIO Bus: probed
[    2.682544] usbcore: registered new interface driver r8152
[    2.687757] usbcore: registered new interface driver cdc_ether
[    2.693555] usbcore: registered new interface driver cdc_subset
[    2.701229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.706332] ehci-exynos: EHCI EXYNOS driver
[    2.710809] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.715966] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.723812] exynos-ehci 12110000.usb: irq 84, io mem 0x12110000
[    2.742210] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.747071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.755019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.762204] usb usb1: Product: EHCI Host Controller
[    2.767053] usb usb1: Manufacturer: Linux 5.0.1 ehci_hcd
[    2.772339] usb usb1: SerialNumber: 12110000.usb
[    2.777522] hub 1-0:1.0: USB hub found
[    2.780703] hub 1-0:1.0: 3 ports detected
[    2.785532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.790812] ohci-exynos: OHCI EXYNOS driver
[    2.795132] exynos-ohci 12120000.usb: USB Host Controller
[    2.800350] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.808068] exynos-ohci 12120000.usb: irq 84, io mem 0x12120000
[    2.874448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    2.881282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.889505] usb usb2: Product: USB Host Controller
[    2.893236] usb usb2: Manufacturer: Linux 5.0.1 ohci_hcd
[    2.898520] usb usb2: SerialNumber: 12120000.usb
[    2.903663] hub 2-0:1.0: USB hub found
[    2.906883] hub 2-0:1.0: 3 ports detected
[    2.912249] usbcore: registered new interface driver usb-storage
[    2.917465] mousedev: PS/2 mouse device common for all mice
[    2.923611] i2c /dev entries driver
[    2.942113] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.955798] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[    2.972422] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    3.039907] s5m-rtc s2mps14-rtc: registered as rtc0
[    3.043899] s2mps11-clk s2mps11-clk: DMA mask not set
[    3.050443] IR NEC protocol handler initialized
[    3.053497] IR RC5(x/sz) protocol handler initialized
[    3.058559] IR RC6 protocol handler initialized
[    3.063061] IR JVC protocol handler initialized
[    3.067566] IR Sony protocol handler initialized
[    3.072158] IR SANYO protocol handler initialized
[    3.076838] IR Sharp protocol handler initialized
[    3.081517] IR MCE Keyboard/mouse protocol handler initialized
[    3.087325] IR XMP protocol handler initialized
[    3.092493] iommu: Adding device 11f50000.jpeg to group 2
[    3.097223] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    3.104535] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
[    3.111370] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
[    3.118180] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    3.123860] iommu: Adding device 11f60000.jpeg to group 3
[    3.129024] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    3.136309] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
[    3.143162] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3
[    3.149982] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    3.156107] iommu: Adding device 11000000.codec to group 4
[    3.161367] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    3.167850] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    3.192588] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    3.200291] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.208912] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.219498] s5p-mfc 11000000.codec: decoder registered as /dev/video4
[    3.225853] s5p-mfc 11000000.codec: encoder registered as /dev/video5
[    3.233266] iommu: Adding device 13e00000.video-scaler to group 5
[    3.238641] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.246734] iommu: Adding device 13e10000.video-scaler to group 6
[    3.252511] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.263743] exynos-tmu 10060000.tmu: Linked as a consumer to regulator.7
[    3.269249] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.276432] exynos-tmu 10064000.tmu: Linked as a consumer to regulator.7
[    3.282545] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.289756] exynos-tmu 10068000.tmu: Linked as a consumer to regulator.7
[    3.295911] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.303112] exynos-tmu 1006c000.tmu: Linked as a consumer to regulator.7
[    3.309257] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.316450] exynos-tmu 100a0000.tmu: Linked as a consumer to regulator.7
[    3.322603] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.330008] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    3.338058] device-mapper: uevent: version 1.0.3
[    3.342302] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.351265] cpu cpu0: Linked as a consumer to regulator.44
[    3.355839] cpu cpu0: Dropping the link to regulator.44
[    3.361650] cpu cpu0: Linked as a consumer to regulator.44
[    3.373089] cpu cpu4: Linked as a consumer to regulator.40
[    3.384762] sdhci: Secure Digital Host Controller Interface driver
[    3.389490] sdhci: Copyright(c) Pierre Ossman
[    3.394001] Synopsys Designware Multimedia Card Interface Driver
[    3.400346] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.406748] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.413065] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.418457] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 86,64 bit host data width,64 deep fifo
[    3.427766] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.19
[    3.434685] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.13
[    3.457079] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.491475] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.496053] hidraw: raw HID events driver (C) Jiri Kosina
[    3.501451] usbcore: registered new interface driver usbhid
[    3.506690] usbhid: USB HID core driver
[    3.511700] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[    3.517884] exynos-bus soc:bus_wcore: Dropping the link to regulator.41
[    3.530942] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.536224] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.542835] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.549400] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.558928] drop_monitor: Initializing network drop monitor service
[    3.563864] NET: Registered protocol family 17
[    3.566710] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.568194] NET: Registered protocol family 15
[    3.582306] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[    3.582658] Key type dns_resolver registered
[    3.590368] mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
[    3.594009] Registering SWP/SWPB emulation handler
[    3.603020] registered taskstats version 1
[    3.603127]  mmcblk0: p1
[    3.606644] Loading compiled-in X.509 certificates
[    3.620048] Key type encrypted registered
[    3.650344] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[    3.655996] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[    3.662535] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[    3.668269] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.673210] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[    3.681010] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.690226] xhci-hcd xhci-hcd.0.auto: irq 146, io mem 0x12000000
[    3.696456] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.704389] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711572] usb usb3: Product: xHCI Host Controller
[    3.716423] usb usb3: Manufacturer: Linux 5.0.1 xhci-hcd
[    3.721706] usb usb3: SerialNumber: xhci-hcd.0.auto
[    3.726914] hub 3-0:1.0: USB hub found
[    3.730322] hub 3-0:1.0: 1 port detected
[    3.734425] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.739658] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    3.747274] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    3.753917] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.762032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.770152] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.777343] usb usb4: Product: xHCI Host Controller
[    3.782194] usb usb4: Manufacturer: Linux 5.0.1 xhci-hcd
[    3.787480] usb usb4: SerialNumber: xhci-hcd.0.auto
[    3.792658] hub 4-0:1.0: USB hub found
[    3.796084] hub 4-0:1.0: 1 port detected
[    3.800930] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[    3.807052] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[    3.813496] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[    3.819083] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.824233] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
[    3.832039] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    3.841237] xhci-hcd xhci-hcd.1.auto: irq 147, io mem 0x12400000
[    3.847482] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    3.855420] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.862610] usb usb5: Product: xHCI Host Controller
[    3.867461] usb usb5: Manufacturer: Linux 5.0.1 xhci-hcd
[    3.872746] usb usb5: SerialNumber: xhci-hcd.1.auto
[    3.877910] hub 5-0:1.0: USB hub found
[    3.881351] hub 5-0:1.0: 1 port detected
[    3.885442] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.890693] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6
[    3.898315] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    3.904949] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.913069] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    3.921190] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.928378] usb usb6: Product: xHCI Host Controller
[    3.933233] usb usb6: Manufacturer: Linux 5.0.1 xhci-hcd
[    3.938518] usb usb6: SerialNumber: xhci-hcd.1.auto
[    3.943727] hub 6-0:1.0: USB hub found
[    3.947118] hub 6-0:1.0: 1 port detected
[    3.951964] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.956611] rtc rtc1: invalid alarm value: 1900-01-03T00:00:00
[    3.962474] s3c-rtc 101e0000.rtc: registered as rtc1
[    3.968543] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[    3.974351] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    3.982871] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    3.990807] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[    3.999177] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[    4.007490] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    4.015840] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    4.023840] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    4.031789] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    4.040104] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    4.048101] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    4.056516] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    4.064653] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    4.073045] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    4.081768] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    4.089986] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    4.098857] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    4.108996] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:10 UTC (946684810)
[    4.145663] vddq_mmc0: disabling
[    4.148718] vdd_adc: disabling
[    4.151751] vdd_ldo12: disabling
[    4.164013] ALSA device list:
[    4.165501]   No soundcards found.
[    4.169464] Freeing unused kernel memory: 1024K
[    4.186383] Run /init as init process
[    4.220101] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.226485] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.226516] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.006310] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    5.031852] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.02
[    5.038597] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.045870] usb 4-1: Product: USB to ATA/ATAPI Bridge
[    5.050730] usb 4-1: Manufacturer: JMicron
[    5.054794] usb 4-1: SerialNumber: 0123456789ABCDEF
[    5.072122] scsi host0: uas
[    5.074300] scsi 0:0:0:0: Direct-Access     JMicron  Generic          3102 PQ: 0 ANSI: 6
[    5.082584] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.102300] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    5.127361] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    5.134111] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    5.141210] usb 6-1: Product: USB 10/100/1000 LAN
[    5.145887] usb 6-1: Manufacturer: Realtek
[    5.149955] usb 6-1: SerialNumber: 000001000000
[    5.361151] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    5.447352] r8152 6-1:1.0 eth0: v1.09.9
[    5.581198] usbcore: registered new interface driver uas
[    5.582473] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    5.592527] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.592797] sd 0:0:0:0: [sda] Write Protect is off
[    5.602904] sd 0:0:0:0: [sda] Disabling FUA
[    5.604048] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    5.606642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.615548]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 >
[    5.622243] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    5.645766] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.673136] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[    7.121277] random: crng init done
[    7.123226] random: 7 urandom warning(s) missed due to ratelimiting
[    7.252956] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    7.268217] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    7.285226] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    7.301466] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[    7.331340] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    7.346925] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    7.363597] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    7.380134] device-mapper: table: 254:1: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[    7.398901] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    7.414339] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    7.414512] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    7.447689] device-mapper: table: 254:2: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[    7.470662] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    7.486109] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    7.486728] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    7.519722] device-mapper: table: 254:3: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[    7.595037] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    7.595048] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    7.627420] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    7.644062] device-mapper: table: 254:4: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[    7.646643] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    7.677683] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    7.677954] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    7.711304] device-mapper: table: 254:5: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[    7.728511] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    7.728518] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    7.728777] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    7.778566] device-mapper: table: 254:6: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[    7.796631] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    7.796637] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    7.796933] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    7.845808] device-mapper: table: 254:7: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[    7.849028] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    7.879415] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    7.879650] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[    7.913040] device-mapper: table: 254:8: adding target device sda15 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  135.637917] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[  288.102696] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  288.102702] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  288.134802] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  288.151212] device-mapper: table: 254:9: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  288.153380] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  288.184646] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  288.184869] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  288.218266] device-mapper: table: 254:10: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  288.220303] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  288.251889] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  288.252100] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  288.285509] device-mapper: table: 254:11: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  288.287640] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  288.319221] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  288.319422] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  288.353016] device-mapper: table: 254:12: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  288.355202] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  288.386815] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  288.387030] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  288.420606] device-mapper: table: 254:13: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  288.422884] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  288.454406] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  288.454617] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  288.488194] device-mapper: table: 254:14: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  288.490371] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  288.521988] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  288.522329] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  288.555782] device-mapper: table: 254:15: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  288.557856] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  288.589577] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  288.589791] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  288.623371] device-mapper: table: 254:16: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  288.625378] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  288.657171] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  288.657385] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  288.690991] device-mapper: table: 254:17: adding target device sda14 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  349.240476] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.255933] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.256132] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.289340] device-mapper: table: 254:18: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.290625] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  349.322819] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  349.322925] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  349.356450] device-mapper: table: 254:19: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  349.357438] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  349.390087] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  349.390261] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  349.423689] device-mapper: table: 254:20: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  349.424688] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  349.457390] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  349.457485] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  349.491191] device-mapper: table: 254:21: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  349.493360] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  349.524982] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  349.525196] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  349.558778] device-mapper: table: 254:22: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  349.560850] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  349.592576] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  349.592774] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  349.626370] device-mapper: table: 254:23: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  349.628411] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  349.660163] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  349.660369] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  349.693957] device-mapper: table: 254:24: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  349.696133] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  349.727756] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  349.727960] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  349.761552] device-mapper: table: 254:25: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  349.763715] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  349.795354] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  349.795638] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  349.829137] device-mapper: table: 254:26: adding target device sda11 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  349.831431] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.862766] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.862975] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  349.896207] device-mapper: table: 254:27: adding target device sda30 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.576875] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.592280] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.592476] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.625642] device-mapper: table: 254:28: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.626974] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.659085] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.659195] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.692536] device-mapper: table: 254:29: adding target device sda27 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  350.693483] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  350.726068] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  350.726262] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  350.759689] device-mapper: table: 254:30: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  350.760633] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  350.793312] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  350.793409] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  350.826932] device-mapper: table: 254:31: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  350.827908] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  350.860560] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  350.860746] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  350.894187] device-mapper: table: 254:32: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  350.896323] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  350.927800] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  350.928014] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  350.961450] device-mapper: table: 254:33: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  350.963640] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  350.995043] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  350.995253] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  351.028664] device-mapper: table: 254:34: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  351.030889] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  351.062396] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  351.062626] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  351.096170] device-mapper: table: 254:35: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  351.098487] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  351.129967] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  351.130251] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  351.163758] device-mapper: table: 254:36: adding target device sda13 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  351.804516] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  351.819875] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  351.820588] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  351.853292] device-mapper: table: 254:37: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  351.862727] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  351.886997] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  351.903793] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  351.903800] device-mapper: table: 254:38: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  351.914459] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  351.954056] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  351.954266] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  351.987678] device-mapper: table: 254:39: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  351.988735] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  352.021403] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  352.021655] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  352.055193] device-mapper: table: 254:40: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1304428032
[  352.057696] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  352.088977] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  352.089207] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  352.122774] device-mapper: table: 254:41: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  352.124768] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  352.156576] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  352.156797] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  352.190363] device-mapper: table: 254:42: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1572863488
[  352.192359] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  352.224163] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  352.224382] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  352.257950] device-mapper: table: 254:43: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1702886912
[  352.260080] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  352.291745] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  352.291839] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  352.325539] device-mapper: table: 254:44: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1912602112
[  352.326655] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  352.359335] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  352.359430] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  352.393129] device-mapper: table: 254:45: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2051014144
[  352.394243] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  352.426948] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  352.443926] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  352.443932] device-mapper: table: 254:46: adding target device sda10 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2453667328
[  353.138003] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.153374] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.153636] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.186812] device-mapper: table: 254:47: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.188259] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.220230] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.220343] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.253680] device-mapper: table: 254:48: adding target device sda26 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  353.254842] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  353.287212] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  353.287310] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  353.320833] device-mapper: table: 254:49: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  353.321788] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  353.354455] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  353.354549] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  353.388076] device-mapper: table: 254:50: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=385875456
[  353.389050] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  353.421702] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  353.421796] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  353.455322] device-mapper: table: 254:51: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=536870400
[  353.456292] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  353.488941] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  353.489035] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  353.522568] device-mapper: table: 254:52: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=666893824
[  353.523566] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  353.556189] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  353.556285] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  353.589804] device-mapper: table: 254:53: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=876609024
[  353.590881] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  353.623517] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  353.623612] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  353.657316] device-mapper: table: 254:54: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1015021056
[  353.659538] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  353.691131] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  353.708141] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  353.724917] device-mapper: table: 254:55: adding target device sda12 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2063597056
[  354.328697] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  354.344021] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  354.344236] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  354.377214] device-mapper: table: 254:56: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  354.378686] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  354.410569] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  354.410684] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  354.444014] device-mapper: table: 254:57: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  354.445064] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  354.477464] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  354.477575] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  354.510911] device-mapper: table: 254:58: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  354.511872] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  354.544448] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  354.544544] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  354.578068] device-mapper: table: 254:59: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  354.579129] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  354.611692] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  354.611789] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  354.645316] device-mapper: table: 254:60: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  354.646424] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  354.678949] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  354.679047] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  354.712558] device-mapper: table: 254:61: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  354.713632] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  354.746198] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  354.746298] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  354.779801] device-mapper: table: 254:62: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  354.780879] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  354.813422] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  354.813519] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  354.847046] device-mapper: table: 254:63: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  354.848086] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  354.880669] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  354.880849] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  354.914293] device-mapper: table: 254:64: adding target device sda7 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  355.538816] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  355.538825] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  355.570904] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  355.570912] device-mapper: table: 254:65: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  355.623063] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  355.638528] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  355.638910] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  355.671846] device-mapper: table: 254:66: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  355.675749] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  355.705443] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  355.705868] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  355.738985] device-mapper: table: 254:67: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1459617280
[  355.741036] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  355.772607] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  355.772831] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  355.806248] device-mapper: table: 254:68: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1681915392
[  355.808154] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  355.839851] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  355.840075] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  355.873471] device-mapper: table: 254:69: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1832910336
[  355.875522] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  355.907094] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  355.907192] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  355.940738] device-mapper: table: 254:70: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1962933760
[  355.958815] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  355.974352] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  355.974566] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  356.007960] device-mapper: table: 254:71: adding target device sda9 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2487221760
[  356.010020] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.041496] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.041712] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.074943] device-mapper: table: 254:72: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.077122] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.108395] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.108400] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  356.141928] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.141933] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.175375] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  356.175602] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.208919] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.225643] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  356.242450] device-mapper: table: 254:73: adding target device sda24 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.242455] device-mapper: table: 254:73: adding target device sda25 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  356.242460] device-mapper: table: 254:73: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=713031168
[  356.243496] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  356.309605] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  356.309701] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  356.343397] device-mapper: table: 254:74: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=3439328768
[  356.344452] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4206886400
[  356.377198] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4206886400
[  356.377406] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4206886400
[  356.410990] device-mapper: table: 254:75: adding target device sda23 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=4206886400
[  357.032605] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  357.048050] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  357.048362] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  357.081206] device-mapper: table: 254:76: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  357.083621] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  357.114605] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  357.131395] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  357.147957] device-mapper: table: 254:77: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  357.150040] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  357.181407] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  357.181623] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  357.214848] device-mapper: table: 254:78: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  357.216938] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  357.248379] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  357.248569] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  357.281999] device-mapper: table: 254:79: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  357.284095] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  357.315627] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  357.315835] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  357.349252] device-mapper: table: 254:80: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  357.351364] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  357.382866] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  357.383075] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  357.416486] device-mapper: table: 254:81: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  357.418553] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  357.450113] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  357.450429] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  357.483730] device-mapper: table: 254:82: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  357.485743] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  357.517354] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  357.517555] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  357.550983] device-mapper: table: 254:83: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  357.552955] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  357.584603] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  357.584806] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  357.618223] device-mapper: table: 254:84: adding target device sda6 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  358.204510] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.219804] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.220187] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.253017] device-mapper: table: 254:85: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.255291] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  358.286377] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  358.286607] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  358.319822] device-mapper: table: 254:86: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  358.321745] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  358.353276] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  358.353496] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  358.386725] device-mapper: table: 254:87: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  358.387906] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  358.420270] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  358.420394] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  358.453875] device-mapper: table: 254:88: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  358.455058] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  358.487497] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  358.487598] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  358.521117] device-mapper: table: 254:89: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  358.522104] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.554655] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.554752] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.588101] device-mapper: table: 254:90: adding target device sda22 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  358.589085] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  358.621642] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  358.621736] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  358.655263] device-mapper: table: 254:91: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  358.657212] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  358.688887] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  358.689100] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  358.722504] device-mapper: table: 254:92: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1421868544
[  358.724454] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  358.756134] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  358.756322] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  358.789751] device-mapper: table: 254:93: adding target device sda8 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  359.401074] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  359.416333] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  359.416867] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  359.449596] device-mapper: table: 254:94: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  359.452586] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  359.482973] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  359.483351] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  359.516387] device-mapper: table: 254:95: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  359.518582] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  359.549851] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  359.566707] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  359.566713] device-mapper: table: 254:96: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  359.567756] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  359.616820] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  359.616916] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  359.650439] device-mapper: table: 254:97: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  359.651439] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  359.684065] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  359.684182] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  359.717701] device-mapper: table: 254:98: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  359.718843] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  359.751304] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  359.751402] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  359.784949] device-mapper: table: 254:99: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  359.785952] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  359.818638] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  359.818735] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  359.852432] device-mapper: table: 254:100: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  359.853406] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  359.886228] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  359.886324] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  359.920026] device-mapper: table: 254:101: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  359.921031] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  359.953866] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  359.970824] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  359.987620] device-mapper: table: 254:102: adding target device sda5 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  360.446749] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  360.462241] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  360.462586] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  360.495770] device-mapper: table: 254:103: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  360.498017] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  360.529478] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  360.529710] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  360.563270] device-mapper: table: 254:104: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  360.565256] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  360.597066] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  360.597289] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  360.630860] device-mapper: table: 254:105: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  360.632806] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  360.664746] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  360.664968] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  360.698712] device-mapper: table: 254:106: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  360.700710] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  360.732681] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  360.732889] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  360.766648] device-mapper: table: 254:107: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  360.768652] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  360.800624] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  360.800817] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  360.834584] device-mapper: table: 254:108: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  360.836559] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  360.868558] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  360.868765] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  360.902523] device-mapper: table: 254:109: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  360.904550] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  360.936494] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  360.936702] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  360.970489] device-mapper: table: 254:110: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  360.988573] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  360.988580] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  361.021514] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  361.038405] device-mapper: table: 254:111: adding target device sda17 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  361.486945] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  361.502389] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  361.519342] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  361.535974] device-mapper: table: 254:112: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[  361.538689] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  361.569681] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  361.569955] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  361.604195] device-mapper: table: 254:113: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=163577344
[  361.611007] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  361.637267] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  361.637552] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  361.671064] device-mapper: table: 254:114: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=884997632
[  361.673476] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  361.704946] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  361.705213] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  361.738914] device-mapper: table: 254:115: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1002438144
[  361.741218] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  361.772882] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  361.773164] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  361.806850] device-mapper: table: 254:116: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1153433088
[  361.808934] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  361.840823] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  361.841039] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  361.874784] device-mapper: table: 254:117: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1283456512
[  361.876725] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  361.908761] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  361.908962] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  361.942744] device-mapper: table: 254:118: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1493171712
[  361.944843] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  361.976718] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  361.976936] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  362.010664] device-mapper: table: 254:119: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=1631583744
[  362.012668] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  362.044656] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  362.061751] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  362.078612] device-mapper: table: 254:120: adding target device sda16 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2034236928
[  362.742095] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[  363.931035] 8021q: 802.1Q VLAN Support v1.8
[  364.005212] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  365.298862] r8152 6-1:1.0 eth0: carrier on
[  365.448128] NET: Registered protocol family 10
[  365.452984] Segment Routing with IPv6
[  365.463879] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  365.489703] br-service: port 1(eth0.6) entered blocking state
[  365.494007] br-service: port 1(eth0.6) entered disabled state
[  365.500179] device eth0.6 entered promiscuous mode
[  365.504523] device eth0 entered promiscuous mode
[  365.509436] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  365.514821] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  365.520973] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  365.532091] br-service: port 1(eth0.6) entered blocking state
[  365.536391] br-service: port 1(eth0.6) entered forwarding state
[  365.700862] br-service: port 2(br-eth-service) entered blocking state
[  365.706071] br-service: port 2(br-eth-service) entered disabled state
[  365.712652] device br-eth-service entered promiscuous mode
[  365.726953] br-service: port 2(br-eth-service) entered blocking state
[  365.731961] br-service: port 2(br-eth-service) entered forwarding state
[  365.905639] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-service: link becomes ready
[  366.132343] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.147344] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.151579] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.196371] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.252838] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.257592] br-ntp: port 1(eth0.7) entered blocking state
[  366.262084] br-ntp: port 1(eth0.7) entered disabled state
[  366.262382] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.264826] device eth0.7 entered promiscuous mode
[  366.277887] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.290901] br-ntp: port 1(eth0.7) entered blocking state
[  366.294861] br-ntp: port 1(eth0.7) entered forwarding state
[  366.420292] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.440595] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.441235] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.450248] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.511276] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.610603] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.615598] br-admin: port 1(eth0.9) entered blocking state
[  366.620148] br-admin: port 1(eth0.9) entered disabled state
[  366.625738] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.626810] device eth0.9 entered promiscuous mode
[  366.636000] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.643848] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  366.661641] br-admin: port 1(eth0.9) entered blocking state
[  366.665819] br-admin: port 1(eth0.9) entered forwarding state
[  366.823368] br-admin: port 2(br-eth-admin) entered blocking state
[  366.828181] br-admin: port 2(br-eth-admin) entered disabled state
[  366.834536] device br-eth-admin entered promiscuous mode
[  366.847816] br-admin: port 2(br-eth-admin) entered blocking state
[  366.852475] br-admin: port 2(br-eth-admin) entered forwarding state
[  366.996242] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-admin: link becomes ready
[  367.253071] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.267572] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.271814] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.317001] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.411762] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.415981] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.421813] br-user: port 1(eth0.8) entered blocking state
[  367.426404] br-user: port 1(eth0.8) entered disabled state
[  367.431942] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.440337] device eth0.8 entered promiscuous mode
[  367.443960] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.452355] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  367.464318] br-user: port 1(eth0.8) entered blocking state
[  367.468353] br-user: port 1(eth0.8) entered forwarding state
[  367.615916] br-user: port 2(br-eth-user) entered blocking state
[  367.620512] br-user: port 2(br-eth-user) entered disabled state
[  367.620759] device br-eth-user entered promiscuous mode
[  367.639252] br-user: port 2(br-eth-user) entered blocking state
[  367.643740] br-user: port 2(br-eth-user) entered forwarding state
[  367.807799] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth-user: link becomes ready
[  368.085512] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.099979] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.104205] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.147652] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.248011] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.252273] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.258555] br-wifi: port 1(eth0.11) entered blocking state
[  368.262758] br-wifi: port 1(eth0.11) entered disabled state
[  368.268350] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.273714] device eth0.11 entered promiscuous mode
[  368.278678] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.286848] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.298307] br-wifi: port 1(eth0.11) entered blocking state
[  368.302424] br-wifi: port 1(eth0.11) entered forwarding state
[  368.424407] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.445719] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.449999] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.508514] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.647226] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.653700] br-alarm: port 1(eth0.4) entered blocking state
[  368.657858] br-alarm: port 1(eth0.4) entered disabled state
[  368.663571] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.666622] device eth0.4 entered promiscuous mode
[  368.673743] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.683359] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.695567] br-alarm: port 1(eth0.4) entered blocking state
[  368.699692] br-alarm: port 1(eth0.4) entered forwarding state
[  368.820460] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.840468] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.845126] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  368.908260] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.033990] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.038336] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.045715] br-vpn: port 1(eth0.13) entered blocking state
[  369.049852] br-vpn: port 1(eth0.13) entered disabled state
[  369.055366] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.058528] device eth0.13 entered promiscuous mode
[  369.066473] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.073825] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.087604] br-vpn: port 1(eth0.13) entered blocking state
[  369.091665] br-vpn: port 1(eth0.13) entered forwarding state
[  369.214096] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.231604] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.235963] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.297959] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.421105] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.425459] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.431155] br-trusted: port 1(eth0.12) entered blocking state
[  369.436099] br-trusted: port 1(eth0.12) entered disabled state
[  369.442079] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.443762] device eth0.12 entered promiscuous mode
[  369.452365] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.460915] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.474426] br-trusted: port 1(eth0.12) entered blocking state
[  369.478811] br-trusted: port 1(eth0.12) entered forwarding state
[  369.602108] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.621496] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.625866] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.693845] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.808255] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.813158] br-fonera: port 1(eth0.3) entered blocking state
[  369.817785] br-fonera: port 1(eth0.3) entered disabled state
[  369.823602] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.824949] device eth0.3 entered promiscuous mode
[  369.833740] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.842084] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  369.855866] br-fonera: port 1(eth0.3) entered blocking state
[  369.860085] br-fonera: port 1(eth0.3) entered forwarding state
[  369.984350] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.004963] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.009350] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.070005] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.185405] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.190948] br-factory: port 1(eth0.15) entered blocking state
[  370.195349] br-factory: port 1(eth0.15) entered disabled state
[  370.201333] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.202588] device eth0.15 entered promiscuous mode
[  370.211710] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.220459] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.234951] br-factory: port 1(eth0.15) entered blocking state
[  370.239338] br-factory: port 1(eth0.15) entered forwarding state
[  370.376902] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.396591] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.400980] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.462059] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.575670] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.580689] br-wan: port 1(eth0.5) entered blocking state
[  370.584941] br-wan: port 1(eth0.5) entered disabled state
[  370.590476] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.591251] device eth0.5 entered promiscuous mode
[  370.600730] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.608248] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.621307] br-wan: port 1(eth0.5) entered blocking state
[  370.625273] br-wan: port 1(eth0.5) entered forwarding state
[  370.778863] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.784836] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.799663] br-test-1: port 1(eth0.1) entered blocking state
[  370.805112] br-test-1: port 1(eth0.1) entered disabled state
[  370.809872] device eth0.1 entered promiscuous mode
[  370.821090] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.826244] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  370.841267] br-test-1: port 1(eth0.1) entered blocking state
[  370.845495] br-test-1: port 1(eth0.1) entered forwarding state
[  371.037861] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  371.056284] br-test-2: port 1(eth0.2) entered blocking state
[  371.061126] br-test-2: port 1(eth0.2) entered disabled state
[  371.066540] device eth0.2 entered promiscuous mode
[  371.077745] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  371.082104] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  371.096352] br-test-2: port 1(eth0.2) entered blocking state
[  371.100575] br-test-2: port 1(eth0.2) entered forwarding state
[  371.309088] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  371.321749] br-test-3: port 1(eth0.10) entered blocking state
[  371.326218] br-test-3: port 1(eth0.10) entered disabled state
[  371.332304] device eth0.10 entered promiscuous mode
[  371.342661] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  371.346898] r8152 6-1:1.0 eth0: Promiscuous mode enabled
[  371.366066] br-test-3: port 1(eth0.10) entered blocking state
[  371.370400] br-test-3: port 1(eth0.10) entered forwarding state
[  373.065282] br-admin: port 3(e-dns-adm) entered blocking state
[  373.069865] br-admin: port 3(e-dns-adm) entered disabled state
[  373.070120] device e-dns-adm entered promiscuous mode
[  373.078473] br-alarm: port 2(e-dns-alar) entered blocking state
[  373.086413] br-alarm: port 2(e-dns-alar) entered disabled state
[  373.086730] device e-dns-alar entered promiscuous mode
[  373.097909] br-alarm: port 2(e-dns-alar) entered blocking state
[  373.097916] br-alarm: port 2(e-dns-alar) entered forwarding state
[  373.104804] br-user: port 3(e-dns-usr) entered blocking state
[  373.115166] br-user: port 3(e-dns-usr) entered disabled state
[  373.115463] device e-dns-usr entered promiscuous mode
[  373.126361] br-user: port 3(e-dns-usr) entered blocking state
[  373.131550] br-user: port 3(e-dns-usr) entered forwarding state
[  373.139712] br-ntp: port 2(e-dns-ntp) entered blocking state
[  373.143971] br-ntp: port 2(e-dns-ntp) entered disabled state
[  373.144297] device e-dns-ntp entered promiscuous mode
[  373.155347] br-ntp: port 2(e-dns-ntp) entered blocking state
[  373.160241] br-ntp: port 2(e-dns-ntp) entered forwarding state
[  373.167353] br-vpn: port 2(e-dns-vpn) entered blocking state
[  373.171709] br-vpn: port 2(e-dns-vpn) entered disabled state
[  373.172075] device e-dns-vpn entered promiscuous mode
[  373.182958] br-vpn: port 2(e-dns-vpn) entered blocking state
[  373.187979] br-vpn: port 2(e-dns-vpn) entered forwarding state
[  373.197670] br-wifi: port 2(e-dns-wifi) entered blocking state
[  373.202085] br-wifi: port 2(e-dns-wifi) entered disabled state
[  373.202743] device e-dns-wifi entered promiscuous mode
[  373.213592] br-wifi: port 2(e-dns-wifi) entered blocking state
[  373.218813] br-wifi: port 2(e-dns-wifi) entered forwarding state
[  373.228338] br-service: port 3(e-dns-srv) entered blocking state
[  373.228347] br-service: port 3(e-dns-srv) entered disabled state
[  373.228677] device e-dns-srv entered promiscuous mode
[  373.244632] br-service: port 3(e-dns-srv) entered blocking state
[  373.249991] br-service: port 3(e-dns-srv) entered forwarding state
[  373.261097] br-trusted: port 2(e-dns-trus) entered blocking state
[  373.261103] br-trusted: port 2(e-dns-trus) entered disabled state
[  373.261368] device e-dns-trus entered promiscuous mode
[  373.277813] br-trusted: port 2(e-dns-trus) entered blocking state
[  373.283047] br-trusted: port 2(e-dns-trus) entered forwarding state
[  373.296682] br-fonera: port 2(e-dns-fone) entered blocking state
[  373.301287] br-fonera: port 2(e-dns-fone) entered disabled state
[  373.302072] device e-dns-fone entered promiscuous mode
[  373.313921] br-fonera: port 2(e-dns-fone) entered blocking state
[  373.313928] br-fonera: port 2(e-dns-fone) entered forwarding state
[  373.346450] br-factory: port 2(e-dns-fact) entered blocking state
[  373.351133] br-factory: port 2(e-dns-fact) entered disabled state
[  373.351578] device e-dns-fact entered promiscuous mode
[  373.371051] br-factory: port 2(e-dns-fact) entered blocking state
[  373.375721] br-factory: port 2(e-dns-fact) entered forwarding state
[  373.407317] br-test-1: port 2(e-dns-tst1) entered blocking state
[  373.411909] br-test-1: port 2(e-dns-tst1) entered disabled state
[  373.420660] device e-dns-tst1 entered promiscuous mode
[  373.425796] br-test-1: port 2(e-dns-tst1) entered blocking state
[  373.430378] br-test-1: port 2(e-dns-tst1) entered forwarding state
[  373.463426] br-test-2: port 2(e-dns-tst2) entered blocking state
[  373.469839] br-test-2: port 2(e-dns-tst2) entered disabled state
[  373.475759] device e-dns-tst2 entered promiscuous mode
[  373.484134] br-test-2: port 2(e-dns-tst2) entered blocking state
[  373.488721] br-test-2: port 2(e-dns-tst2) entered forwarding state
[  373.510808] br-test-3: port 2(e-dns-tst3) entered blocking state
[  373.515405] br-test-3: port 2(e-dns-tst3) entered disabled state
[  373.523490] device e-dns-tst3 entered promiscuous mode
[  373.528470] br-test-3: port 2(e-dns-tst3) entered blocking state
[  373.533189] br-test-3: port 2(e-dns-tst3) entered forwarding state
[  373.543225] cgroup: lxc-autostart (12843) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  373.557645] cgroup: "memory" requires setting use_hierarchy to 1 on the root
[  374.088252] br-alarm: port 2(e-dns-alar) entered disabled state
[  374.102307] br-user: port 3(e-dns-usr) entered disabled state
[  374.114290] br-ntp: port 2(e-dns-ntp) entered disabled state
[  374.125965] br-vpn: port 2(e-dns-vpn) entered disabled state
[  374.139558] br-wifi: port 2(e-dns-wifi) entered disabled state
[  374.150655] br-service: port 3(e-dns-srv) entered disabled state
[  374.173787] br-trusted: port 2(e-dns-trus) entered disabled state
[  374.182064] br-fonera: port 2(e-dns-fone) entered disabled state
[  374.189613] br-factory: port 2(e-dns-fact) entered disabled state
[  374.202679] br-test-1: port 2(e-dns-tst1) entered disabled state
[  374.213109] br-test-2: port 2(e-dns-tst2) entered disabled state
[  374.221683] br-test-3: port 2(e-dns-tst3) entered disabled state
[  374.496467] EXT4-fs (dm-76): couldn't mount as ext3 due to feature incompatibilities
[  374.520767] EXT4-fs (dm-76): mounted filesystem with ordered data mode. Opts: (null)
[  374.528465] eth-admin: renamed from vethIL9B6P
[  374.569123] eth-alarm: renamed from vethKE9CV6
[  374.600551] eth-user: renamed from veth3VPUW2
[  374.631311] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  374.637472] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-adm: link becomes ready
[  374.644615] br-admin: port 3(e-dns-adm) entered blocking state
[  374.649148] br-admin: port 3(e-dns-adm) entered forwarding state
[  374.660205] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  374.666264] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-alar: link becomes ready
[  374.672592] br-alarm: port 2(e-dns-alar) entered blocking state
[  374.678235] br-alarm: port 2(e-dns-alar) entered forwarding state
[  374.686074] eth-ntp: renamed from veth86SUG3
[  374.728371] eth-vpn: renamed from vethUITA9C
[  374.783530] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  374.789491] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-usr: link becomes ready
[  374.797041] br-user: port 3(e-dns-usr) entered blocking state
[  374.801443] br-user: port 3(e-dns-usr) entered forwarding state
[  374.808472] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  374.817457] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-ntp: link becomes ready
[  374.823845] br-ntp: port 2(e-dns-ntp) entered blocking state
[  374.828455] br-ntp: port 2(e-dns-ntp) entered forwarding state
[  374.836150] eth-wifi: renamed from vethWSNBNV
[  374.888582] eth-srv: renamed from veth4WT8FB
[  374.927429] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  374.934031] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-vpn: link becomes ready
[  374.940018] br-vpn: port 2(e-dns-vpn) entered blocking state
[  374.944995] br-vpn: port 2(e-dns-vpn) entered forwarding state
[  374.955479] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  374.962993] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-wifi: link becomes ready
[  374.968848] br-wifi: port 2(e-dns-wifi) entered blocking state
[  374.974222] br-wifi: port 2(e-dns-wifi) entered forwarding state
[  374.982251] eth-trust: renamed from veth1WINW9
[  375.020563] eth-foner: renamed from veth3ETM8P
[  375.055547] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  375.061432] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-srv: link becomes ready
[  375.068464] br-service: port 3(e-dns-srv) entered blocking state
[  375.073427] br-service: port 3(e-dns-srv) entered forwarding state
[  375.082389] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  375.089192] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-trus: link becomes ready
[  375.097196] br-trusted: port 2(e-dns-trus) entered blocking state
[  375.101939] br-trusted: port 2(e-dns-trus) entered forwarding state
[  375.113102] eth-fact: renamed from veth9BAKIN
[  375.137681] eth-tst1: renamed from vethAUG6CD
[  375.171442] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  375.177297] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-fone: link becomes ready
[  375.185151] br-fonera: port 2(e-dns-fone) entered blocking state
[  375.189826] br-fonera: port 2(e-dns-fone) entered forwarding state
[  375.197126] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  375.203908] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-fact: link becomes ready
[  375.210426] br-factory: port 2(e-dns-fact) entered blocking state
[  375.215389] br-factory: port 2(e-dns-fact) entered forwarding state
[  375.224703] eth-tst2: renamed from vethGJE7AU
[  375.260680] eth-tst3: renamed from vethDCIDR8
[  375.295573] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  375.301508] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst1: link becomes ready
[  375.311440] br-test-1: port 2(e-dns-tst1) entered blocking state
[  375.316174] br-test-1: port 2(e-dns-tst1) entered forwarding state
[  375.317328] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  375.334530] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst2: link becomes ready
[  375.340342] br-test-2: port 2(e-dns-tst2) entered blocking state
[  375.345971] br-test-2: port 2(e-dns-tst2) entered forwarding state
[  375.356504] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  375.371919] IPv6: ADDRCONF(NETDEV_CHANGE): e-dns-tst3: link becomes ready
[  375.379384] br-test-3: port 2(e-dns-tst3) entered blocking state
[  375.384045] br-test-3: port 2(e-dns-tst3) entered forwarding state
[  375.409223] EXT4-fs (dm-77): mounted filesystem with ordered data mode. Opts: (null)
[  375.442548] EXT4-fs (dm-78): mounted filesystem with ordered data mode. Opts: (null)
[  375.470434] EXT4-fs (dm-79): mounted filesystem with ordered data mode. Opts: (null)
[  375.490511] EXT4-fs (dm-80): mounted filesystem with ordered data mode. Opts: (null)
[  375.513785] EXT4-fs (dm-81): mounted filesystem with ordered data mode. Opts: (null)
[  375.539081] EXT4-fs (dm-82): mounted filesystem with ordered data mode. Opts: (null)
[  375.562348] EXT4-fs (dm-83): mounted filesystem with ordered data mode. Opts: (null)
[  375.598301] EXT4-fs (dm-84): mounted filesystem with ordered data mode. Opts: (null)
[  375.822247] br-admin: port 4(e-dhcp-adm) entered blocking state
[  375.822263] br-admin: port 4(e-dhcp-adm) entered disabled state
[  375.836357] device e-dhcp-adm entered promiscuous mode
[  375.842885] br-admin: port 4(e-dhcp-adm) entered blocking state
[  375.842898] br-admin: port 4(e-dhcp-adm) entered forwarding state
[  375.896543] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  375.901202] br-alarm: port 3(e-dhcp-alar) entered disabled state
[  375.901762] device e-dhcp-alar entered promiscuous mode
[  375.913485] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  375.918356] br-alarm: port 3(e-dhcp-alar) entered forwarding state
[  375.948841] br-user: port 4(e-dhcp-usr) entered blocking state
[  375.953549] br-user: port 4(e-dhcp-usr) entered disabled state
[  375.954113] device e-dhcp-usr entered promiscuous mode
[  375.956429] br-user: port 4(e-dhcp-usr) entered blocking state
[  375.970046] br-user: port 4(e-dhcp-usr) entered forwarding state
[  375.987405] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  375.992405] br-ntp: port 3(e-dhcp-ntp) entered disabled state
[  375.998410] device e-dhcp-ntp entered promiscuous mode
[  376.005798] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  376.010223] br-ntp: port 3(e-dhcp-ntp) entered forwarding state
[  376.050559] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  376.055171] br-vpn: port 3(e-dhcp-vpn) entered disabled state
[  376.055667] device e-dhcp-vpn entered promiscuous mode
[  376.070629] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  376.075013] br-vpn: port 3(e-dhcp-vpn) entered forwarding state
[  376.096219] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  376.096232] br-wifi: port 3(e-dhcp-wifi) entered disabled state
[  376.109988] device e-dhcp-wifi entered promiscuous mode
[  376.116344] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  376.116358] br-wifi: port 3(e-dhcp-wifi) entered forwarding state
[  376.153161] br-service: port 4(e-dhcp-srv) entered blocking state
[  376.158116] br-service: port 4(e-dhcp-srv) entered disabled state
[  376.158823] device e-dhcp-srv entered promiscuous mode
[  376.170492] br-service: port 4(e-dhcp-srv) entered blocking state
[  376.175210] br-service: port 4(e-dhcp-srv) entered forwarding state
[  376.194815] br-admin: port 4(e-dhcp-adm) entered disabled state
[  376.200170] br-alarm: port 3(e-dhcp-alar) entered disabled state
[  376.209784] br-user: port 4(e-dhcp-usr) entered disabled state
[  376.215668] br-ntp: port 3(e-dhcp-ntp) entered disabled state
[  376.238617] br-vpn: port 3(e-dhcp-vpn) entered disabled state
[  376.246350] br-wifi: port 3(e-dhcp-wifi) entered disabled state
[  376.251864] br-service: port 4(e-dhcp-srv) entered disabled state
[  376.264830] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  376.271873] br-trusted: port 3(e-dhcp-trus) entered disabled state
[  376.290436] device e-dhcp-trus entered promiscuous mode
[  376.296410] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  376.301194] br-trusted: port 3(e-dhcp-trus) entered forwarding state
[  376.344196] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  376.350389] br-fonera: port 3(e-dhcp-fone) entered disabled state
[  376.355493] device e-dhcp-fone entered promiscuous mode
[  376.372253] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  376.376933] br-fonera: port 3(e-dhcp-fone) entered forwarding state
[  376.413985] br-factory: port 3(e-dhcp-fact) entered blocking state
[  376.426870] br-factory: port 3(e-dhcp-fact) entered disabled state
[  376.438771] device e-dhcp-fact entered promiscuous mode
[  376.443624] br-factory: port 3(e-dhcp-fact) entered blocking state
[  376.448730] br-factory: port 3(e-dhcp-fact) entered forwarding state
[  376.517197] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  376.523009] br-test-1: port 3(e-dhcp-tst1) entered disabled state
[  376.529452] device e-dhcp-tst1 entered promiscuous mode
[  376.535047] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  376.539742] br-test-1: port 3(e-dhcp-tst1) entered forwarding state
[  376.639883] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  376.647097] br-test-2: port 3(e-dhcp-tst2) entered disabled state
[  376.655374] device e-dhcp-tst2 entered promiscuous mode
[  376.664059] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  376.668751] br-test-2: port 3(e-dhcp-tst2) entered forwarding state
[  376.740750] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  376.754309] br-test-3: port 3(e-dhcp-tst3) entered disabled state
[  376.762822] device e-dhcp-tst3 entered promiscuous mode
[  376.769068] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  376.773728] br-test-3: port 3(e-dhcp-tst3) entered forwarding state
[  377.245905] br-trusted: port 3(e-dhcp-trus) entered disabled state
[  377.251199] br-fonera: port 3(e-dhcp-fone) entered disabled state
[  377.259868] br-factory: port 3(e-dhcp-fact) entered disabled state
[  377.286563] br-test-1: port 3(e-dhcp-tst1) entered disabled state
[  377.313111] br-test-2: port 3(e-dhcp-tst2) entered disabled state
[  377.326292] br-test-3: port 3(e-dhcp-tst3) entered disabled state
[  377.592227] EXT4-fs (dm-94): couldn't mount as ext3 due to feature incompatibilities
[  377.640991] EXT4-fs (dm-94): mounted filesystem with ordered data mode. Opts: (null)
[  377.659697] eth-admin: renamed from veth0TYG7W
[  377.715301] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  377.721418] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-adm: link becomes ready
[  377.728783] br-admin: port 4(e-dhcp-adm) entered blocking state
[  377.733360] br-admin: port 4(e-dhcp-adm) entered forwarding state
[  377.760057] eth-alarm: renamed from vethJJBBJB
[  377.822509] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  377.828752] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-alar: link becomes ready
[  377.835023] br-alarm: port 3(e-dhcp-alar) entered blocking state
[  377.840664] br-alarm: port 3(e-dhcp-alar) entered forwarding state
[  377.851326] EXT4-fs (dm-77): re-mounted. Opts: (null)
[  377.862813] eth-user: renamed from veth6E1VRO
[  377.918327] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  377.924403] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-usr: link becomes ready
[  377.930985] br-user: port 4(e-dhcp-usr) entered blocking state
[  377.936146] br-user: port 4(e-dhcp-usr) entered forwarding state
[  377.963046] eth-ntp: renamed from veth3W1XYB
[  377.997247] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  378.003041] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-ntp: link becomes ready
[  378.010713] br-ntp: port 3(e-dhcp-ntp) entered blocking state
[  378.015107] br-ntp: port 3(e-dhcp-ntp) entered forwarding state
[  378.043008] eth-vpn: renamed from veth7H3L0E
[  378.097220] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  378.104008] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-vpn: link becomes ready
[  378.110987] br-vpn: port 3(e-dhcp-vpn) entered blocking state
[  378.115390] br-vpn: port 3(e-dhcp-vpn) entered forwarding state
[  378.130266] eth-wifi: renamed from vethFY6RAW
[  378.185548] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  378.191494] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-wifi: link becomes ready
[  378.204426] br-wifi: port 3(e-dhcp-wifi) entered blocking state
[  378.208995] br-wifi: port 3(e-dhcp-wifi) entered forwarding state
[  378.234649] eth-srv: renamed from vethTF5FCT
[  378.276813] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  378.283392] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-srv: link becomes ready
[  378.291020] br-service: port 4(e-dhcp-srv) entered blocking state
[  378.291046] br-service: port 4(e-dhcp-srv) entered forwarding state
[  378.320778] eth-trust: renamed from veth5J1WF0
[  378.384211] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  378.390872] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-trus: link becomes ready
[  378.397682] br-trusted: port 3(e-dhcp-trus) entered blocking state
[  378.402582] br-trusted: port 3(e-dhcp-trus) entered forwarding state
[  378.422425] eth-foner: renamed from vethTQTKF2
[  378.487088] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  378.493834] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-fone: link becomes ready
[  378.502476] br-fonera: port 3(e-dhcp-fone) entered blocking state
[  378.507176] br-fonera: port 3(e-dhcp-fone) entered forwarding state
[  378.540962] eth-fact: renamed from vethEFPX09
[  378.604203] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  378.610913] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-fact: link becomes ready
[  378.617532] br-factory: port 3(e-dhcp-fact) entered blocking state
[  378.617550] br-factory: port 3(e-dhcp-fact) entered forwarding state
[  378.650866] eth-tst1: renamed from vethAQ8UMH
[  378.689951] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  378.695971] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst1: link becomes ready
[  378.703404] br-test-1: port 3(e-dhcp-tst1) entered blocking state
[  378.703424] br-test-1: port 3(e-dhcp-tst1) entered forwarding state
[  378.734812] eth-tst2: renamed from vethA4DM9B
[  378.789989] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  378.795811] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst2: link becomes ready
[  378.810623] br-test-2: port 3(e-dhcp-tst2) entered blocking state
[  378.815350] br-test-2: port 3(e-dhcp-tst2) entered forwarding state
[  378.840031] eth-tst3: renamed from vethM3TOBA
[  378.924683] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  378.931298] IPv6: ADDRCONF(NETDEV_CHANGE): e-dhcp-tst3: link becomes ready
[  378.937272] br-test-3: port 3(e-dhcp-tst3) entered blocking state
[  378.937283] br-test-3: port 3(e-dhcp-tst3) entered forwarding state
[  379.007934] EXT4-fs (dm-95): mounted filesystem with ordered data mode. Opts: (null)
[  379.070798] EXT4-fs (dm-96): mounted filesystem with ordered data mode. Opts: (null)
[  379.130846] EXT4-fs (dm-97): mounted filesystem with ordered data mode. Opts: (null)
[  379.182759] EXT4-fs (dm-98): mounted filesystem with ordered data mode. Opts: (null)
[  379.254788] EXT4-fs (dm-99): mounted filesystem with ordered data mode. Opts: (null)
[  379.315128] EXT4-fs (dm-100): mounted filesystem with ordered data mode. Opts: (null)
[  379.375840] EXT4-fs (dm-101): mounted filesystem with ordered data mode. Opts: (null)
[  379.439127] EXT4-fs (dm-102): mounted filesystem with ordered data mode. Opts: (null)
[  379.620033] br-admin: port 5(e-sysl-adm) entered blocking state
[  379.624806] br-admin: port 5(e-sysl-adm) entered disabled state
[  379.631038] device e-sysl-adm entered promiscuous mode
[  379.653559] br-alarm: port 4(e-sysl-alar) entered blocking state
[  379.658451] br-alarm: port 4(e-sysl-alar) entered disabled state
[  379.658927] device e-sysl-alar entered promiscuous mode
[  379.672814] br-alarm: port 4(e-sysl-alar) entered blocking state
[  379.677408] br-alarm: port 4(e-sysl-alar) entered forwarding state
[  379.697210] br-user: port 5(e-sysl-usr) entered blocking state
[  379.702116] br-user: port 5(e-sysl-usr) entered disabled state
[  379.711757] device e-sysl-usr entered promiscuous mode
[  379.716451] br-user: port 5(e-sysl-usr) entered blocking state
[  379.721285] br-user: port 5(e-sysl-usr) entered forwarding state
[  379.745853] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  379.750224] br-ntp: port 4(e-sysl-ntp) entered disabled state
[  379.751092] device e-sysl-ntp entered promiscuous mode
[  379.761760] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  379.766753] br-ntp: port 4(e-sysl-ntp) entered forwarding state
[  379.785217] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  379.789698] br-vpn: port 4(e-sysl-vpn) entered disabled state
[  379.795703] device e-sysl-vpn entered promiscuous mode
[  379.797387] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  379.806097] br-vpn: port 4(e-sysl-vpn) entered forwarding state
[  379.823254] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  379.828761] br-wifi: port 4(e-sysl-wifi) entered disabled state
[  379.834207] device e-sysl-wifi entered promiscuous mode
[  379.835502] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  379.844754] br-wifi: port 4(e-sysl-wifi) entered forwarding state
[  379.868685] br-service: port 5(e-sysl-srv) entered blocking state
[  379.873372] br-service: port 5(e-sysl-srv) entered disabled state
[  379.873797] device e-sysl-srv entered promiscuous mode
[  379.874750] br-service: port 5(e-sysl-srv) entered blocking state
[  379.890611] br-service: port 5(e-sysl-srv) entered forwarding state
[  379.919433] br-trusted: port 4(e-sysl-trus) entered blocking state
[  379.924356] br-trusted: port 4(e-sysl-trus) entered disabled state
[  379.924850] device e-sysl-trus entered promiscuous mode
[  379.936623] br-trusted: port 4(e-sysl-trus) entered blocking state
[  379.941795] br-trusted: port 4(e-sysl-trus) entered forwarding state
[  379.965875] br-fonera: port 4(e-sysl-fone) entered blocking state
[  379.970749] br-fonera: port 4(e-sysl-fone) entered disabled state
[  379.971302] device e-sysl-fone entered promiscuous mode
[  379.983207] br-fonera: port 4(e-sysl-fone) entered blocking state
[  379.987921] br-fonera: port 4(e-sysl-fone) entered forwarding state
[  380.008572] br-factory: port 4(e-sysl-fact) entered blocking state
[  380.013436] br-factory: port 4(e-sysl-fact) entered disabled state
[  380.013919] device e-sysl-fact entered promiscuous mode
[  380.025761] br-factory: port 4(e-sysl-fact) entered blocking state
[  380.025775] br-factory: port 4(e-sysl-fact) entered forwarding state
[  380.049657] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  380.049673] br-test-1: port 4(e-sysl-tst1) entered disabled state
[  380.050423] device e-sysl-tst1 entered promiscuous mode
[  380.051480] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  380.051493] br-test-1: port 4(e-sysl-tst1) entered forwarding state
[  380.076570] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  380.076584] br-test-2: port 4(e-sysl-tst2) entered disabled state
[  380.077133] device e-sysl-tst2 entered promiscuous mode
[  380.078085] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  380.078099] br-test-2: port 4(e-sysl-tst2) entered forwarding state
[  380.103394] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  380.103404] br-test-3: port 4(e-sysl-tst3) entered disabled state
[  380.103983] device e-sysl-tst3 entered promiscuous mode
[  380.104972] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  380.104988] br-test-3: port 4(e-sysl-tst3) entered forwarding state
[  380.681003] br-alarm: port 4(e-sysl-alar) entered disabled state
[  380.686687] br-user: port 5(e-sysl-usr) entered disabled state
[  380.694915] br-ntp: port 4(e-sysl-ntp) entered disabled state
[  380.700723] br-vpn: port 4(e-sysl-vpn) entered disabled state
[  380.708764] br-wifi: port 4(e-sysl-wifi) entered disabled state
[  380.716982] br-service: port 5(e-sysl-srv) entered disabled state
[  380.727233] br-trusted: port 4(e-sysl-trus) entered disabled state
[  380.732925] br-fonera: port 4(e-sysl-fone) entered disabled state
[  380.764219] br-factory: port 4(e-sysl-fact) entered disabled state
[  380.771101] br-test-1: port 4(e-sysl-tst1) entered disabled state
[  380.777074] br-test-2: port 4(e-sysl-tst2) entered disabled state
[  380.786877] br-test-3: port 4(e-sysl-tst3) entered disabled state
[  380.910442] EXT4-fs (dm-85): couldn't mount as ext3 due to feature incompatibilities
[  380.935241] EXT4-fs (dm-85): mounted filesystem with ordered data mode. Opts: (null)
[  380.944133] eth-admin: renamed from veth4HKQCR
[  380.989431] eth-alarm: renamed from vethE8S45G
[  381.049495] eth-user: renamed from vethLJ4YID
[  381.083329] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  381.089577] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-adm: link becomes ready
[  381.096855] br-admin: port 5(e-sysl-adm) entered blocking state
[  381.101424] br-admin: port 5(e-sysl-adm) entered forwarding state
[  381.110602] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  381.116640] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-alar: link becomes ready
[  381.125225] br-alarm: port 4(e-sysl-alar) entered blocking state
[  381.129894] br-alarm: port 4(e-sysl-alar) entered forwarding state
[  381.143301] eth-ntp: renamed from vethY3LSLV
[  381.217301] eth-vpn: renamed from vethAPNUQJ
[  381.272018] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  381.279108] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-usr: link becomes ready
[  381.286553] br-user: port 5(e-sysl-usr) entered blocking state
[  381.291010] br-user: port 5(e-sysl-usr) entered forwarding state
[  381.300833] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  381.307566] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-ntp: link becomes ready
[  381.317632] br-ntp: port 4(e-sysl-ntp) entered blocking state
[  381.322039] br-ntp: port 4(e-sysl-ntp) entered forwarding state
[  381.334715] eth-wifi: renamed from vethQA56SI
[  381.368755] eth-srv: renamed from vethW04Q3G
[  381.411232] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  381.417040] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-vpn: link becomes ready
[  381.426591] br-vpn: port 4(e-sysl-vpn) entered blocking state
[  381.430985] br-vpn: port 4(e-sysl-vpn) entered forwarding state
[  381.439719] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  381.448342] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-wifi: link becomes ready
[  381.458909] br-wifi: port 4(e-sysl-wifi) entered blocking state
[  381.463481] br-wifi: port 4(e-sysl-wifi) entered forwarding state
[  381.471729] eth-trust: renamed from vethGOR10B
[  381.508818] eth-foner: renamed from vethF034GI
[  381.571416] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  381.577395] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-srv: link becomes ready
[  381.585278] br-service: port 5(e-sysl-srv) entered blocking state
[  381.590076] br-service: port 5(e-sysl-srv) entered forwarding state
[  381.597072] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  381.605212] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-trus: link becomes ready
[  381.614426] br-trusted: port 4(e-sysl-trus) entered blocking state
[  381.619254] br-trusted: port 4(e-sysl-trus) entered forwarding state
[  381.634261] eth-fact: renamed from vethMIKCQX
[  381.694100] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  381.701910] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-fone: link becomes ready
[  381.703399] br-fonera: port 4(e-sysl-fone) entered blocking state
[  381.703414] br-fonera: port 4(e-sysl-fone) entered forwarding state
[  381.705370] eth-tst1: renamed from vethR5QN7R
[  381.745001] eth-tst2: renamed from vethAN2RNP
[  381.767174] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  381.773095] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-fact: link becomes ready
[  381.781021] br-factory: port 4(e-sysl-fact) entered blocking state
[  381.785887] br-factory: port 4(e-sysl-fact) entered forwarding state
[  381.789007] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  381.800499] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst1: link becomes ready
[  381.807422] br-test-1: port 4(e-sysl-tst1) entered blocking state
[  381.812168] br-test-1: port 4(e-sysl-tst1) entered forwarding state
[  381.823686] eth-tst3: renamed from vethNLD2GA
[  381.888132] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  381.895899] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst2: link becomes ready
[  381.903920] br-test-2: port 4(e-sysl-tst2) entered blocking state
[  381.908692] br-test-2: port 4(e-sysl-tst2) entered forwarding state
[  381.916034] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  381.928046] IPv6: ADDRCONF(NETDEV_CHANGE): e-sysl-tst3: link becomes ready
[  381.941701] br-test-3: port 4(e-sysl-tst3) entered blocking state
[  381.946407] br-test-3: port 4(e-sysl-tst3) entered forwarding state
[  381.981086] EXT4-fs (dm-86): mounted filesystem with ordered data mode. Opts: (null)
[  382.010482] EXT4-fs (dm-87): mounted filesystem with ordered data mode. Opts: (null)
[  382.034945] EXT4-fs (dm-88): mounted filesystem with ordered data mode. Opts: (null)
[  382.067636] EXT4-fs (dm-89): mounted filesystem with ordered data mode. Opts: (null)
[  382.108752] EXT4-fs (dm-90): mounted filesystem with ordered data mode. Opts: (null)
[  382.165904] EXT4-fs (dm-91): mounted filesystem with ordered data mode. Opts: (null)
[  382.206020] EXT4-fs (dm-92): mounted filesystem with ordered data mode. Opts: (null)
[  382.261062] EXT4-fs (dm-93): mounted filesystem with ordered data mode. Opts: (null)
[  382.437076] br-admin: port 6(e-ntp-adm) entered blocking state
[  382.441692] br-admin: port 6(e-ntp-adm) entered disabled state
[  382.442332] device e-ntp-adm entered promiscuous mode
[  382.454949] br-admin: port 6(e-ntp-adm) entered blocking state
[  382.459444] br-admin: port 6(e-ntp-adm) entered forwarding state
[  382.489225] br-alarm: port 5(e-ntp-alar) entered blocking state
[  382.494734] br-alarm: port 5(e-ntp-alar) entered disabled state
[  382.505993] device e-ntp-alar entered promiscuous mode
[  382.511313] br-alarm: port 5(e-ntp-alar) entered blocking state
[  382.516074] br-alarm: port 5(e-ntp-alar) entered forwarding state
[  382.547323] br-user: port 6(e-ntp-usr) entered blocking state
[  382.551942] br-user: port 6(e-ntp-usr) entered disabled state
[  382.558020] device e-ntp-usr entered promiscuous mode
[  382.563412] br-user: port 6(e-ntp-usr) entered blocking state
[  382.568184] br-user: port 6(e-ntp-usr) entered forwarding state
[  382.591903] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  382.591914] br-ntp: port 5(e-ntp-ntp) entered disabled state
[  382.602493] device e-ntp-ntp entered promiscuous mode
[  382.608042] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  382.612487] br-ntp: port 5(e-ntp-ntp) entered forwarding state
[  382.649830] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  382.654131] br-vpn: port 5(e-ntp-vpn) entered disabled state
[  382.654691] device e-ntp-vpn entered promiscuous mode
[  382.666547] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  382.670820] br-vpn: port 5(e-ntp-vpn) entered forwarding state
[  382.709926] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  382.714749] br-wifi: port 5(e-ntp-wifi) entered disabled state
[  382.721262] device e-ntp-wifi entered promiscuous mode
[  382.726543] br-admin: port 6(e-ntp-adm) entered disabled state
[  382.732288] br-alarm: port 5(e-ntp-alar) entered disabled state
[  382.738005] br-user: port 6(e-ntp-usr) entered disabled state
[  382.744983] br-ntp: port 5(e-ntp-ntp) entered disabled state
[  382.750846] br-vpn: port 5(e-ntp-vpn) entered disabled state
[  382.812896] br-service: port 6(e-ntp-srv) entered blocking state
[  382.812906] br-service: port 6(e-ntp-srv) entered disabled state
[  382.813244] device e-ntp-srv entered promiscuous mode
[  382.842903] br-service: port 6(e-ntp-srv) entered blocking state
[  382.847498] br-service: port 6(e-ntp-srv) entered forwarding state
[  382.897284] br-trusted: port 5(e-ntp-trus) entered blocking state
[  382.909015] br-trusted: port 5(e-ntp-trus) entered disabled state
[  382.914271] device e-ntp-trus entered promiscuous mode
[  382.919440] br-trusted: port 5(e-ntp-trus) entered blocking state
[  382.924914] br-trusted: port 5(e-ntp-trus) entered forwarding state
[  382.978138] br-fonera: port 5(e-ntp-fone) entered blocking state
[  382.983821] br-fonera: port 5(e-ntp-fone) entered disabled state
[  382.984210] device e-ntp-fone entered promiscuous mode
[  383.005120] br-fonera: port 5(e-ntp-fone) entered blocking state
[  383.009710] br-fonera: port 5(e-ntp-fone) entered forwarding state
[  383.048399] br-factory: port 5(e-ntp-fact) entered blocking state
[  383.057837] br-factory: port 5(e-ntp-fact) entered disabled state
[  383.063964] device e-ntp-fact entered promiscuous mode
[  383.068348] br-factory: port 5(e-ntp-fact) entered blocking state
[  383.073770] br-factory: port 5(e-ntp-fact) entered forwarding state
[  383.110508] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  383.115166] br-test-1: port 5(e-ntp-tst1) entered disabled state
[  383.115576] device e-ntp-tst1 entered promiscuous mode
[  383.116043] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  383.116050] br-test-1: port 5(e-ntp-tst1) entered forwarding state
[  383.165353] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  383.169981] br-test-2: port 5(e-ntp-tst2) entered disabled state
[  383.180522] device e-ntp-tst2 entered promiscuous mode
[  383.187672] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  383.192264] br-test-2: port 5(e-ntp-tst2) entered forwarding state
[  383.221481] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  383.227374] br-test-3: port 5(e-ntp-tst3) entered disabled state
[  383.233263] device e-ntp-tst3 entered promiscuous mode
[  383.237809] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  383.243155] br-test-3: port 5(e-ntp-tst3) entered forwarding state
[  383.311951] EXT4-fs (dm-95): re-mounted. Opts: (null)
[  383.763534] br-service: port 6(e-ntp-srv) entered disabled state
[  383.768717] br-trusted: port 5(e-ntp-trus) entered disabled state
[  383.775412] br-fonera: port 5(e-ntp-fone) entered disabled state
[  383.795234] br-factory: port 5(e-ntp-fact) entered disabled state
[  383.808385] br-test-1: port 5(e-ntp-tst1) entered disabled state
[  383.816170] br-test-2: port 5(e-ntp-tst2) entered disabled state
[  383.824033] br-test-3: port 5(e-ntp-tst3) entered disabled state
[  384.091021] EXT4-fs (dm-56): couldn't mount as ext3 due to feature incompatibilities
[  384.329236] EXT4-fs (dm-56): recovery complete
[  384.346883] EXT4-fs (dm-56): mounted filesystem with ordered data mode. Opts: (null)
[  384.363477] eth-admin: renamed from veth7ORIW3
[  384.409830] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  384.415826] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-adm: link becomes ready
[  384.423319] br-admin: port 6(e-ntp-adm) entered blocking state
[  384.427819] br-admin: port 6(e-ntp-adm) entered forwarding state
[  384.457967] eth-alarm: renamed from vethSPFMOG
[  384.528924] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  384.534885] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-alar: link becomes ready
[  384.543111] br-alarm: port 5(e-ntp-alar) entered blocking state
[  384.547692] br-alarm: port 5(e-ntp-alar) entered forwarding state
[  384.568834] eth-user: renamed from veth95BL5D
[  384.639782] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  384.645722] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-usr: link becomes ready
[  384.653260] br-user: port 6(e-ntp-usr) entered blocking state
[  384.657653] br-user: port 6(e-ntp-usr) entered forwarding state
[  384.680973] eth-ntp: renamed from vethGWO1MA
[  384.732644] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  384.739416] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-ntp: link becomes ready
[  384.745878] br-ntp: port 5(e-ntp-ntp) entered blocking state
[  384.750392] br-ntp: port 5(e-ntp-ntp) entered forwarding state
[  384.779511] eth-vpn: renamed from veth2BPH45
[  384.828760] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  384.835256] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-vpn: link becomes ready
[  384.843878] br-vpn: port 5(e-ntp-vpn) entered blocking state
[  384.848164] br-vpn: port 5(e-ntp-vpn) entered forwarding state
[  384.872170] eth-wifi: renamed from veth4RQTQF
[  384.929501] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  384.935524] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-wifi: link becomes ready
[  384.943041] br-wifi: port 5(e-ntp-wifi) entered blocking state
[  384.947526] br-wifi: port 5(e-ntp-wifi) entered forwarding state
[  384.955903] eth-srv: renamed from vethCB5WNE
[  384.991096] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  384.997713] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-srv: link becomes ready
[  385.004393] br-service: port 6(e-ntp-srv) entered blocking state
[  385.009080] br-service: port 6(e-ntp-srv) entered forwarding state
[  385.014939] eth-trust: renamed from vethYRG580
[  385.104939] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  385.115174] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-trus: link becomes ready
[  385.121097] br-trusted: port 5(e-ntp-trus) entered blocking state
[  385.126686] br-trusted: port 5(e-ntp-trus) entered forwarding state
[  385.144340] eth-foner: renamed from vethRPXMXF
[  385.203234] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  385.209109] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-fone: link becomes ready
[  385.218612] br-fonera: port 5(e-ntp-fone) entered blocking state
[  385.223304] br-fonera: port 5(e-ntp-fone) entered forwarding state
[  385.233259] eth-fact: renamed from vethY75AD3
[  385.293091] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  385.299871] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-fact: link becomes ready
[  385.305679] br-factory: port 5(e-ntp-fact) entered blocking state
[  385.311405] br-factory: port 5(e-ntp-fact) entered forwarding state
[  385.322264] eth-tst1: renamed from veth10XJYX
[  385.358454] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  385.366435] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst1: link becomes ready
[  385.372251] br-test-1: port 5(e-ntp-tst1) entered blocking state
[  385.377862] br-test-1: port 5(e-ntp-tst1) entered forwarding state
[  385.385687] eth-tst2: renamed from vethRM8SWC
[  385.461361] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  385.467288] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst2: link becomes ready
[  385.475323] br-test-2: port 5(e-ntp-tst2) entered blocking state
[  385.475338] br-test-2: port 5(e-ntp-tst2) entered forwarding state
[  385.495213] eth-tst3: renamed from vethY4MO2O
[  385.548243] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  385.555891] IPv6: ADDRCONF(NETDEV_CHANGE): e-ntp-tst3: link becomes ready
[  385.562273] br-test-3: port 5(e-ntp-tst3) entered blocking state
[  385.562287] br-test-3: port 5(e-ntp-tst3) entered forwarding state
[  385.792996] EXT4-fs (dm-57): 1 orphan inode deleted
[  385.806254] EXT4-fs (dm-57): recovery complete
[  385.844879] EXT4-fs (dm-86): re-mounted. Opts: (null)
[  385.854111] EXT4-fs (dm-57): mounted filesystem with ordered data mode. Opts: (null)
[  385.928777] EXT4-fs (dm-58): recovery complete
[  385.939679] EXT4-fs (dm-58): mounted filesystem with ordered data mode. Opts: (null)
[  386.194735] EXT4-fs (dm-59): recovery complete
[  386.203053] EXT4-fs (dm-59): mounted filesystem with ordered data mode. Opts: (null)
[  386.314750] EXT4-fs (dm-60): recovery complete
[  386.325076] EXT4-fs (dm-60): mounted filesystem with ordered data mode. Opts: (null)
[  386.417404] EXT4-fs (dm-61): recovery complete
[  386.428342] EXT4-fs (dm-61): mounted filesystem with ordered data mode. Opts: (null)
[  386.634234] EXT4-fs (dm-62): 1 orphan inode deleted
[  386.637667] EXT4-fs (dm-62): recovery complete
[  386.698227] EXT4-fs (dm-62): mounted filesystem with ordered data mode. Opts: (null)
[  386.973569] EXT4-fs (dm-63): recovery complete
[  386.984773] EXT4-fs (dm-63): mounted filesystem with ordered data mode. Opts: (null)
[  387.249925] EXT4-fs (dm-64): recovery complete
[  387.262245] EXT4-fs (dm-64): mounted filesystem with ordered data mode. Opts: (null)
[  387.397205] br-admin: port 7(e-mmon-adm) entered blocking state
[  387.401747] br-admin: port 7(e-mmon-adm) entered disabled state
[  387.403027] device e-mmon-adm entered promiscuous mode
[  387.428664] br-user: port 7(e-mmon-usr) entered blocking state
[  387.433283] br-user: port 7(e-mmon-usr) entered disabled state
[  387.439234] device e-mmon-usr entered promiscuous mode
[  387.444446] br-user: port 7(e-mmon-usr) entered blocking state
[  387.449819] br-user: port 7(e-mmon-usr) entered forwarding state
[  387.464705] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  387.469244] br-wifi: port 6(e-mmon-wifi) entered disabled state
[  387.469694] device e-mmon-wifi entered promiscuous mode
[  387.480995] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  387.481001] br-wifi: port 6(e-mmon-wifi) entered forwarding state
[  387.495859] br-service: port 7(e-mmon-srv) entered blocking state
[  387.500656] br-service: port 7(e-mmon-srv) entered disabled state
[  387.501132] device e-mmon-srv entered promiscuous mode
[  387.501868] br-service: port 7(e-mmon-srv) entered blocking state
[  387.501877] br-service: port 7(e-mmon-srv) entered forwarding state
[  387.518952] br-factory: port 6(e-mmon-fact) entered blocking state
[  387.530789] br-factory: port 6(e-mmon-fact) entered disabled state
[  387.531121] device e-mmon-fact entered promiscuous mode
[  387.544833] br-factory: port 6(e-mmon-fact) entered blocking state
[  387.544842] br-factory: port 6(e-mmon-fact) entered forwarding state
[  387.909567] EXT4-fs (dm-37): couldn't mount as ext3 due to feature incompatibilities
[  388.114814] EXT4-fs (dm-37): recovery complete
[  388.135335] EXT4-fs (dm-37): mounted filesystem with ordered data mode. Opts: (null)
[  388.174734] eth-admin: renamed from vethAT629N
[  388.231707] br-user: port 7(e-mmon-usr) entered disabled state
[  388.236956] br-wifi: port 6(e-mmon-wifi) entered disabled state
[  388.243094] br-service: port 7(e-mmon-srv) entered disabled state
[  388.254578] br-factory: port 6(e-mmon-fact) entered disabled state
[  388.259776] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  388.274706] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-adm: link becomes ready
[  388.280564] br-admin: port 7(e-mmon-adm) entered blocking state
[  388.286058] br-admin: port 7(e-mmon-adm) entered forwarding state
[  388.303917] eth-user: renamed from vethYCVQDV
[  388.371092] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-usr: link becomes ready
[  388.377091] br-user: port 7(e-mmon-usr) entered blocking state
[  388.382362] br-user: port 7(e-mmon-usr) entered forwarding state
[  388.395304] eth-wifi: renamed from vethEBGR53
[  388.457549] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  388.463509] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-wifi: link becomes ready
[  388.470058] br-wifi: port 6(e-mmon-wifi) entered blocking state
[  388.475554] br-wifi: port 6(e-mmon-wifi) entered forwarding state
[  388.498849] eth-srv: renamed from veth52AQ95
[  388.533770] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  388.539598] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-srv: link becomes ready
[  388.546317] br-service: port 7(e-mmon-srv) entered blocking state
[  388.551748] br-service: port 7(e-mmon-srv) entered forwarding state
[  388.567129] eth-fact: renamed from vethBKPU96
[  388.629392] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  388.642450] IPv6: ADDRCONF(NETDEV_CHANGE): e-mmon-fact: link becomes ready
[  388.648400] br-factory: port 6(e-mmon-fact) entered blocking state
[  388.654225] br-factory: port 6(e-mmon-fact) entered forwarding state
[  388.907333] EXT4-fs (dm-38): 1 orphan inode deleted
[  388.930684] EXT4-fs (dm-38): recovery complete
[  388.972405] EXT4-fs (dm-38): mounted filesystem with ordered data mode. Opts: (null)
[  389.578960] EXT4-fs (dm-39): recovery complete
[  389.590285] EXT4-fs (dm-39): mounted filesystem with ordered data mode. Opts: (null)
[  389.718581] EXT4-fs (dm-40): recovery complete
[  389.730267] EXT4-fs (dm-40): mounted filesystem with ordered data mode. Opts: (null)
[  389.993584] EXT4-fs (dm-41): 30 orphan inodes deleted
[  390.018416] EXT4-fs (dm-41): recovery complete
[  390.062239] EXT4-fs (dm-41): mounted filesystem with ordered data mode. Opts: (null)
[  390.226616] EXT4-fs (dm-42): recovery complete
[  390.242597] EXT4-fs (dm-42): mounted filesystem with ordered data mode. Opts: (null)
[  390.434644] EXT4-fs (dm-43): recovery complete
[  390.450246] EXT4-fs (dm-43): mounted filesystem with ordered data mode. Opts: (null)
[  390.677923] EXT4-fs (dm-57): re-mounted. Opts: (null)
[  390.694735] EXT4-fs (dm-44): recovery complete
[  390.707349] EXT4-fs (dm-44): mounted filesystem with ordered data mode. Opts: (null)
[  391.050655] EXT4-fs (dm-45): recovery complete
[  391.058311] EXT4-fs (dm-45): mounted filesystem with ordered data mode. Opts: (null)
[  391.148354] EXT4-fs (dm-46): recovery complete
[  391.158285] EXT4-fs (dm-46): mounted filesystem with ordered data mode. Opts: (null)
[  391.308134] br-admin: port 8(e-fire-adm) entered blocking state
[  391.312622] br-admin: port 8(e-fire-adm) entered disabled state
[  391.313100] device e-fire-adm entered promiscuous mode
[  391.339441] br-alarm: port 6(e-fire-alar) entered blocking state
[  391.344100] br-alarm: port 6(e-fire-alar) entered disabled state
[  391.344674] device e-fire-alar entered promiscuous mode
[  391.355843] br-alarm: port 6(e-fire-alar) entered blocking state
[  391.361205] br-alarm: port 6(e-fire-alar) entered forwarding state
[  391.377672] br-user: port 8(e-fire-usr) entered blocking state
[  391.382131] br-user: port 8(e-fire-usr) entered disabled state
[  391.382557] device e-fire-usr entered promiscuous mode
[  391.393610] br-user: port 8(e-fire-usr) entered blocking state
[  391.393617] br-user: port 8(e-fire-usr) entered forwarding state
[  391.424405] br-ntp: port 6(e-fire-ntp) entered blocking state
[  391.428742] br-ntp: port 6(e-fire-ntp) entered disabled state
[  391.429452] device e-fire-ntp entered promiscuous mode
[  391.442619] br-ntp: port 6(e-fire-ntp) entered blocking state
[  391.446941] br-ntp: port 6(e-fire-ntp) entered forwarding state
[  391.472744] br-vpn: port 6(e-fire-vpn) entered blocking state
[  391.482008] br-vpn: port 6(e-fire-vpn) entered disabled state
[  391.488990] device e-fire-vpn entered promiscuous mode
[  391.493443] br-vpn: port 6(e-fire-vpn) entered blocking state
[  391.498417] br-vpn: port 6(e-fire-vpn) entered forwarding state
[  391.532327] br-wifi: port 7(e-fire-wifi) entered blocking state
[  391.536843] br-wifi: port 7(e-fire-wifi) entered disabled state
[  391.537218] device e-fire-wifi entered promiscuous mode
[  391.551352] br-wifi: port 7(e-fire-wifi) entered blocking state
[  391.551361] br-wifi: port 7(e-fire-wifi) entered forwarding state
[  391.572683] br-service: port 8(e-fire-srv) entered blocking state
[  391.577439] br-service: port 8(e-fire-srv) entered disabled state
[  391.577811] device e-fire-srv entered promiscuous mode
[  391.578515] br-service: port 8(e-fire-srv) entered blocking state
[  391.578523] br-service: port 8(e-fire-srv) entered forwarding state
[  391.600511] br-test-1: port 6(e-fire-tst1) entered blocking state
[  391.608098] br-test-1: port 6(e-fire-tst1) entered disabled state
[  391.614664] device e-fire-tst1 entered promiscuous mode
[  391.619385] br-test-1: port 6(e-fire-tst1) entered blocking state
[  391.619396] br-test-1: port 6(e-fire-tst1) entered forwarding state
[  391.641832] br-test-2: port 6(e-fire-tst2) entered blocking state
[  391.655848] br-test-2: port 6(e-fire-tst2) entered disabled state
[  391.660977] device e-fire-tst2 entered promiscuous mode
[  391.661768] br-test-2: port 6(e-fire-tst2) entered blocking state
[  391.661778] br-test-2: port 6(e-fire-tst2) entered forwarding state
[  391.691115] br-test-3: port 6(e-fire-tst3) entered blocking state
[  391.698861] br-test-3: port 6(e-fire-tst3) entered disabled state
[  391.704036] device e-fire-tst3 entered promiscuous mode
[  391.709404] br-test-3: port 6(e-fire-tst3) entered blocking state
[  391.709414] br-test-3: port 6(e-fire-tst3) entered forwarding state
[  391.765960] br-trusted: port 6(e-fire-trus) entered blocking state
[  391.773442] br-trusted: port 6(e-fire-trus) entered disabled state
[  391.779190] device e-fire-trus entered promiscuous mode
[  391.784057] br-trusted: port 6(e-fire-trus) entered blocking state
[  391.789560] br-trusted: port 6(e-fire-trus) entered forwarding state
[  391.844934] br-fonera: port 6(e-fire-fone) entered blocking state
[  391.849654] br-fonera: port 6(e-fire-fone) entered disabled state
[  391.858444] device e-fire-fone entered promiscuous mode
[  391.862858] br-fonera: port 6(e-fire-fone) entered blocking state
[  391.868341] br-fonera: port 6(e-fire-fone) entered forwarding state
[  391.913981] br-wan: port 2(e-fire-wan) entered blocking state
[  391.918381] br-wan: port 2(e-fire-wan) entered disabled state
[  391.924560] device e-fire-wan entered promiscuous mode
[  391.929965] br-wan: port 2(e-fire-wan) entered blocking state
[  391.934870] br-wan: port 2(e-fire-wan) entered forwarding state
[  391.964445] br-factory: port 7(e-fire-fact) entered blocking state
[  391.969205] br-factory: port 7(e-fire-fact) entered disabled state
[  391.987739] device e-fire-fact entered promiscuous mode
[  391.996276] br-factory: port 7(e-fire-fact) entered blocking state
[  392.001028] br-factory: port 7(e-fire-fact) entered forwarding state
[  392.332435] br-alarm: port 6(e-fire-alar) entered disabled state
[  392.337436] br-user: port 8(e-fire-usr) entered disabled state
[  392.344292] br-ntp: port 6(e-fire-ntp) entered disabled state
[  392.364953] br-vpn: port 6(e-fire-vpn) entered disabled state
[  392.373004] br-wifi: port 7(e-fire-wifi) entered disabled state
[  392.384023] br-service: port 8(e-fire-srv) entered disabled state
[  392.397552] br-test-1: port 6(e-fire-tst1) entered disabled state
[  392.410562] br-test-2: port 6(e-fire-tst2) entered disabled state
[  392.416606] br-test-3: port 6(e-fire-tst3) entered disabled state
[  392.425101] br-trusted: port 6(e-fire-trus) entered disabled state
[  392.447337] br-fonera: port 6(e-fire-fone) entered disabled state
[  392.453176] br-wan: port 2(e-fire-wan) entered disabled state
[  392.458845] br-factory: port 7(e-fire-fact) entered disabled state
[  392.887832] EXT4-fs (dm-9): couldn't mount as ext3 due to feature incompatibilities
[  393.047881] EXT4-fs (dm-9): recovery complete
[  393.052974] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
[  393.063883] eth-admin: renamed from vethWL8Q2C
[  393.123609] eth-alarm: renamed from vethGSP3N7
[  393.160745] eth-user: renamed from vethEK1UX5
[  393.207820] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  393.213744] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-adm: link becomes ready
[  393.221779] br-admin: port 8(e-fire-adm) entered blocking state
[  393.226332] br-admin: port 8(e-fire-adm) entered forwarding state
[  393.233762] IPv6: ADDRCONF(NETDEV_CHANGE): eth-alarm: link becomes ready
[  393.242101] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-alar: link becomes ready
[  393.249058] br-alarm: port 6(e-fire-alar) entered blocking state
[  393.253726] br-alarm: port 6(e-fire-alar) entered forwarding state
[  393.264787] eth-ntp: renamed from vethGV2SDC
[  393.308010] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  393.314140] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-usr: link becomes ready
[  393.322376] br-user: port 8(e-fire-usr) entered blocking state
[  393.326822] br-user: port 8(e-fire-usr) entered forwarding state
[  393.348812] eth-vpn: renamed from veth0USLGF
[  393.396682] eth-wifi: renamed from vethM1G8JX
[  393.465074] IPv6: ADDRCONF(NETDEV_CHANGE): eth-ntp: link becomes ready
[  393.470887] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-ntp: link becomes ready
[  393.478756] br-ntp: port 6(e-fire-ntp) entered blocking state
[  393.483178] br-ntp: port 6(e-fire-ntp) entered forwarding state
[  393.494850] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  393.500709] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-vpn: link becomes ready
[  393.512595] br-vpn: port 6(e-fire-vpn) entered blocking state
[  393.517069] br-vpn: port 6(e-fire-vpn) entered forwarding state
[  393.526091] eth-srv: renamed from veth0RA3D9
[  393.564672] eth-tst1: renamed from vethIKY9A6
[  393.626332] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  393.632425] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-wifi: link becomes ready
[  393.639508] br-wifi: port 7(e-fire-wifi) entered blocking state
[  393.644358] br-wifi: port 7(e-fire-wifi) entered forwarding state
[  393.645482] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  393.661791] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-srv: link becomes ready
[  393.667784] br-service: port 8(e-fire-srv) entered blocking state
[  393.673274] br-service: port 8(e-fire-srv) entered forwarding state
[  393.682622] eth-tst2: renamed from vethT03SCF
[  393.720880] eth-tst3: renamed from vethQ1AREM
[  393.775400] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst1: link becomes ready
[  393.781293] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst1: link becomes ready
[  393.788330] br-test-1: port 6(e-fire-tst1) entered blocking state
[  393.793597] br-test-1: port 6(e-fire-tst1) entered forwarding state
[  393.794828] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst2: link becomes ready
[  393.809271] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst2: link becomes ready
[  393.817719] br-test-2: port 6(e-fire-tst2) entered blocking state
[  393.822458] br-test-2: port 6(e-fire-tst2) entered forwarding state
[  393.846425] eth-trust: renamed from vethDTLDCN
[  393.876271] IPv6: ADDRCONF(NETDEV_CHANGE): eth-tst3: link becomes ready
[  393.885484] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-tst3: link becomes ready
[  393.892482] br-test-3: port 6(e-fire-tst3) entered blocking state
[  393.897248] br-test-3: port 6(e-fire-tst3) entered forwarding state
[  393.907911] eth-foner: renamed from vethPI2RH4
[  393.955138] IPv6: ADDRCONF(NETDEV_CHANGE): eth-trust: link becomes ready
[  393.961143] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-trus: link becomes ready
[  393.973655] br-trusted: port 6(e-fire-trus) entered blocking state
[  393.978476] br-trusted: port 6(e-fire-trus) entered forwarding state
[  393.993686] eth-wan: renamed from vethDN0Y2N
[  394.076830] eth-fact: renamed from vethKX4N18
[  394.139393] IPv6: ADDRCONF(NETDEV_CHANGE): eth-foner: link becomes ready
[  394.147527] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-fone: link becomes ready
[  394.153551] br-fonera: port 6(e-fire-fone) entered blocking state
[  394.159141] br-fonera: port 6(e-fire-fone) entered forwarding state
[  394.160292] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wan: link becomes ready
[  394.174357] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-wan: link becomes ready
[  394.180268] br-wan: port 2(e-fire-wan) entered blocking state
[  394.185504] br-wan: port 2(e-fire-wan) entered forwarding state
[  394.197398] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  394.203305] IPv6: ADDRCONF(NETDEV_CHANGE): e-fire-fact: link becomes ready
[  394.216382] br-factory: port 7(e-fire-fact) entered blocking state
[  394.221218] br-factory: port 7(e-fire-fact) entered forwarding state
[  394.366507] EXT4-fs (dm-10): 1 orphan inode deleted
[  394.378274] EXT4-fs (dm-10): recovery complete
[  394.392248] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
[  394.443315] EXT4-fs (dm-11): recovery complete
[  394.448753] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
[  394.566989] EXT4-fs (dm-12): recovery complete
[  394.571845] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
[  394.699650] EXT4-fs (dm-13): recovery complete
[  394.705174] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
[  394.846867] EXT4-fs (dm-14): 1 orphan inode deleted
[  394.851019] EXT4-fs (dm-14): recovery complete
[  394.871651] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
[  394.939009] EXT4-fs (dm-15): recovery complete
[  394.943869] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
[  395.077604] EXT4-fs (dm-16): recovery complete
[  395.082531] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: (null)
[  395.237084] EXT4-fs (dm-17): recovery complete
[  395.241891] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: (null)
[  395.339270] br-admin: port 9(e-auth-adm) entered blocking state
[  395.343973] br-admin: port 9(e-auth-adm) entered disabled state
[  395.350012] device e-auth-adm entered promiscuous mode
[  395.373023] br-user: port 9(e-auth-usr) entered blocking state
[  395.377428] br-user: port 9(e-auth-usr) entered disabled state
[  395.377836] device e-auth-usr entered promiscuous mode
[  395.388973] br-user: port 9(e-auth-usr) entered blocking state
[  395.394209] br-user: port 9(e-auth-usr) entered forwarding state
[  395.416386] br-wifi: port 8(e-auth-wifi) entered blocking state
[  395.420908] br-wifi: port 8(e-auth-wifi) entered disabled state
[  395.421694] device e-auth-wifi entered promiscuous mode
[  395.432620] br-wifi: port 8(e-auth-wifi) entered blocking state
[  395.437875] br-wifi: port 8(e-auth-wifi) entered forwarding state
[  395.484502] br-service: port 9(e-auth-srv) entered blocking state
[  395.489232] br-service: port 9(e-auth-srv) entered disabled state
[  395.495624] device e-auth-srv entered promiscuous mode
[  395.497435] br-service: port 9(e-auth-srv) entered blocking state
[  395.506403] br-service: port 9(e-auth-srv) entered forwarding state
[  395.552441] br-factory: port 8(e-auth-fact) entered blocking state
[  395.558867] br-factory: port 8(e-auth-fact) entered disabled state
[  395.564787] device e-auth-fact entered promiscuous mode
[  395.570131] br-factory: port 8(e-auth-fact) entered blocking state
[  395.575003] br-factory: port 8(e-auth-fact) entered forwarding state
[  395.969581] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[  396.358844] br-user: port 9(e-auth-usr) entered disabled state
[  396.363827] br-wifi: port 8(e-auth-wifi) entered disabled state
[  396.369806] br-service: port 9(e-auth-srv) entered disabled state
[  396.392440] br-factory: port 8(e-auth-fact) entered disabled state
[  396.802634] EXT4-fs (dm-0): recovery complete
[  396.819654] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  396.874923] eth-admin: renamed from vethWET1WB
[  396.953696] eth-user: renamed from vethR6O7HS
[  397.030613] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  397.036534] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-adm: link becomes ready
[  397.043168] br-admin: port 9(e-auth-adm) entered blocking state
[  397.048624] br-admin: port 9(e-auth-adm) entered forwarding state
[  397.065747] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  397.071505] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-usr: link becomes ready
[  397.081450] br-user: port 9(e-auth-usr) entered blocking state
[  397.085952] br-user: port 9(e-auth-usr) entered forwarding state
[  397.098763] eth-wifi: renamed from vethC2Y4RM
[  397.154513] IPv6: ADDRCONF(NETDEV_CHANGE): eth-wifi: link becomes ready
[  397.160294] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-wifi: link becomes ready
[  397.170636] br-wifi: port 8(e-auth-wifi) entered blocking state
[  397.173364] EXT4-fs (dm-10): re-mounted. Opts: (null)
[  397.175187] br-wifi: port 8(e-auth-wifi) entered forwarding state
[  397.176030] eth-srv: renamed from veth6WQUL0
[  397.277582] EXT4-fs (dm-38): re-mounted. Opts: (null)
[  397.342320] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  397.348072] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-srv: link becomes ready
[  397.354763] br-service: port 9(e-auth-srv) entered blocking state
[  397.360334] br-service: port 9(e-auth-srv) entered forwarding state
[  397.375646] eth-fact: renamed from vethCL8V1B
[  397.437247] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  397.443575] IPv6: ADDRCONF(NETDEV_CHANGE): e-auth-fact: link becomes ready
[  397.449799] br-factory: port 8(e-auth-fact) entered blocking state
[  397.455534] br-factory: port 8(e-auth-fact) entered forwarding state
[  397.899400] EXT4-fs (dm-1): 1 orphan inode deleted
[  397.922516] EXT4-fs (dm-1): recovery complete
[  397.966252] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  398.174669] EXT4-fs (dm-2): recovery complete
[  398.192570] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  398.394631] EXT4-fs (dm-3): recovery complete
[  398.414287] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[  398.802643] EXT4-fs (dm-4): recovery complete
[  398.818465] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[  399.039020] EXT4-fs (dm-5): recovery complete
[  399.050336] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[  399.418625] EXT4-fs (dm-6): recovery complete
[  399.438280] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[  400.578734] EXT4-fs (dm-7): recovery complete
[  400.591234] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[  400.958496] EXT4-fs (dm-8): recovery complete
[  400.978365] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[  401.216453] br-admin: port 10(e-nfs-adm) entered blocking state
[  401.220949] br-admin: port 10(e-nfs-adm) entered disabled state
[  401.221755] device e-nfs-adm entered promiscuous mode
[  401.250595] br-user: port 10(e-nfs-usr) entered blocking state
[  401.255000] br-user: port 10(e-nfs-usr) entered disabled state
[  401.261818] device e-nfs-usr entered promiscuous mode
[  401.267012] br-user: port 10(e-nfs-usr) entered blocking state
[  401.267021] br-user: port 10(e-nfs-usr) entered forwarding state
[  401.290045] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  401.294500] br-wifi: port 9(e-nfs-wifi) entered disabled state
[  401.301171] device e-nfs-wifi entered promiscuous mode
[  401.306304] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  401.311168] br-wifi: port 9(e-nfs-wifi) entered forwarding state
[  401.331738] br-service: port 10(e-nfs-srv) entered blocking state
[  401.336511] br-service: port 10(e-nfs-srv) entered disabled state
[  401.337224] device e-nfs-srv entered promiscuous mode
[  401.349561] br-service: port 10(e-nfs-srv) entered blocking state
[  401.354252] br-service: port 10(e-nfs-srv) entered forwarding state
[  401.385571] br-factory: port 9(e-nfs-fact) entered blocking state
[  401.393993] br-factory: port 9(e-nfs-fact) entered disabled state
[  401.399071] device e-nfs-fact entered promiscuous mode
[  401.405115] br-factory: port 9(e-nfs-fact) entered blocking state
[  401.409830] br-factory: port 9(e-nfs-fact) entered forwarding state
[  401.685721] EXT4-fs (dm-18): couldn't mount as ext3 due to feature incompatibilities
[  401.864818] EXT4-fs (dm-18): recovery complete
[  401.871233] eth-admin: renamed from veth2HY1DF
[  401.921038] eth-user: renamed from veth4AL8EH
[  401.968175] br-user: port 10(e-nfs-usr) entered disabled state
[  401.973129] br-wifi: port 9(e-nfs-wifi) entered disabled state
[  401.979825] br-service: port 10(e-nfs-srv) entered disabled state
[  401.988720] br-factory: port 9(e-nfs-fact) entered disabled state
[  401.993735] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  402.004945] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-adm: link becomes ready
[  402.011493] br-admin: port 10(e-nfs-adm) entered blocking state
[  402.016115] br-admin: port 10(e-nfs-adm) entered forwarding state
[  402.027890] eth-wifi: renamed from vethIDPSC0
[  402.068528] eth-srv: renamed from veth7DLE04
[  402.099410] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-usr: link becomes ready
[  402.105068] br-user: port 10(e-nfs-usr) entered blocking state
[  402.110494] br-user: port 10(e-nfs-usr) entered forwarding state
[  402.120248] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-wifi: link becomes ready
[  402.126009] br-wifi: port 9(e-nfs-wifi) entered blocking state
[  402.131419] br-wifi: port 9(e-nfs-wifi) entered forwarding state
[  402.142126] eth-fact: renamed from veth84E1YG
[  402.265648] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-srv: link becomes ready
[  402.273188] br-service: port 10(e-nfs-srv) entered blocking state
[  402.277864] br-service: port 10(e-nfs-srv) entered forwarding state
[  402.291602] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  402.303008] IPv6: ADDRCONF(NETDEV_CHANGE): e-nfs-fact: link becomes ready
[  402.309573] br-factory: port 9(e-nfs-fact) entered blocking state
[  402.314445] br-factory: port 9(e-nfs-fact) entered forwarding state
[  402.392274] EXT4-fs (dm-19): 1 orphan inode deleted
[  402.395862] EXT4-fs (dm-19): recovery complete
[  402.458506] EXT4-fs (dm-20): recovery complete
[  402.533496] EXT4-fs (dm-21): recovery complete
[  402.593539] EXT4-fs (dm-22): recovery complete
[  402.735344] EXT4-fs (dm-23): recovery complete
[  402.779776] EXT4-fs (dm-24): recovery complete
[  402.891182] EXT4-fs (dm-25): recovery complete
[  402.969578] EXT4-fs (dm-26): recovery complete
[  403.556133] EXT4-fs (dm-27): recovery complete
[  403.647452] br-admin: port 11(e-bust-adm) entered blocking state
[  403.652035] br-admin: port 11(e-bust-adm) entered disabled state
[  403.652371] device e-bust-adm entered promiscuous mode
[  403.674270] br-user: port 11(e-bust-usr) entered blocking state
[  403.678900] br-user: port 11(e-bust-usr) entered disabled state
[  403.685055] device e-bust-usr entered promiscuous mode
[  403.685660] br-user: port 11(e-bust-usr) entered blocking state
[  403.685669] br-user: port 11(e-bust-usr) entered forwarding state
[  403.702493] br-service: port 11(e-bust-srv) entered blocking state
[  403.707961] br-service: port 11(e-bust-srv) entered disabled state
[  403.715024] device e-bust-srv entered promiscuous mode
[  403.719752] br-service: port 11(e-bust-srv) entered blocking state
[  403.725299] br-service: port 11(e-bust-srv) entered forwarding state
[  403.769277] br-factory: port 10(e-bust-fact) entered blocking state
[  403.774211] br-factory: port 10(e-bust-fact) entered disabled state
[  403.775218] device e-bust-fact entered promiscuous mode
[  403.787958] br-factory: port 10(e-bust-fact) entered blocking state
[  403.792803] br-factory: port 10(e-bust-fact) entered forwarding state
[  404.085966] EXT4-fs (dm-47): couldn't mount as ext3 due to feature incompatibilities
[  404.140686] EXT4-fs (dm-47): recovery complete
[  404.150029] eth-admin: renamed from vethWTGHKG
[  404.174555] br-user: port 11(e-bust-usr) entered disabled state
[  404.180675] br-service: port 11(e-bust-srv) entered disabled state
[  404.191869] br-factory: port 10(e-bust-fact) entered disabled state
[  404.197151] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  404.205163] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-adm: link becomes ready
[  404.212388] br-admin: port 11(e-bust-adm) entered blocking state
[  404.216965] br-admin: port 11(e-bust-adm) entered forwarding state
[  404.226966] eth-user: renamed from vethW9XDPH
[  404.252580] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-usr: link becomes ready
[  404.259412] br-user: port 11(e-bust-usr) entered blocking state
[  404.263917] br-user: port 11(e-bust-usr) entered forwarding state
[  404.274753] eth-srv: renamed from vethB6M5H1
[  404.315568] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-srv: link becomes ready
[  404.321229] br-service: port 11(e-bust-srv) entered blocking state
[  404.327082] br-service: port 11(e-bust-srv) entered forwarding state
[  404.339724] eth-fact: renamed from veth72KT2W
[  404.414799] IPv6: ADDRCONF(NETDEV_CHANGE): e-bust-fact: link becomes ready
[  404.420624] br-factory: port 10(e-bust-fact) entered blocking state
[  404.426503] br-factory: port 10(e-bust-fact) entered forwarding state
[  404.751391] EXT4-fs (dm-48): 1 orphan inode deleted
[  404.761430] EXT4-fs (dm-48): recovery complete
[  404.779387] EXT4-fs mount: 11 callbacks suppressed
[  404.779396] EXT4-fs (dm-48): mounted filesystem with ordered data mode. Opts: (null)
[  404.837106] EXT4-fs (dm-49): recovery complete
[  404.843266] EXT4-fs (dm-49): mounted filesystem with ordered data mode. Opts: (null)
[  405.007081] EXT4-fs (dm-50): recovery complete
[  405.026354] EXT4-fs (dm-50): mounted filesystem with ordered data mode. Opts: (null)
[  405.044421] EXT4-fs (dm-19): re-mounted. Opts: (null)
[  405.186974] EXT4-fs (dm-51): recovery complete
[  405.191875] EXT4-fs (dm-51): mounted filesystem with ordered data mode. Opts: (null)
[  405.276545] EXT4-fs (dm-52): recovery complete
[  405.281387] EXT4-fs (dm-52): mounted filesystem with ordered data mode. Opts: (null)
[  405.309875] EXT4-fs (dm-53): recovery complete
[  405.314462] EXT4-fs (dm-53): mounted filesystem with ordered data mode. Opts: (null)
[  405.408802] EXT4-fs (dm-54): recovery complete
[  405.413413] EXT4-fs (dm-54): mounted filesystem with ordered data mode. Opts: (null)
[  405.500011] EXT4-fs (dm-55): recovery complete
[  405.504715] EXT4-fs (dm-55): mounted filesystem with ordered data mode. Opts: (null)
[  405.601255] br-admin: port 12(e-ownc-adm) entered blocking state
[  405.605863] br-admin: port 12(e-ownc-adm) entered disabled state
[  405.608039] device e-ownc-adm entered promiscuous mode
[  405.641269] br-user: port 12(e-ownc-usr) entered blocking state
[  405.645766] br-user: port 12(e-ownc-usr) entered disabled state
[  405.652661] device e-ownc-usr entered promiscuous mode
[  405.657799] br-user: port 12(e-ownc-usr) entered blocking state
[  405.662667] br-user: port 12(e-ownc-usr) entered forwarding state
[  405.686068] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  405.690670] br-wifi: port 10(e-ownc-wifi) entered disabled state
[  405.691568] device e-ownc-wifi entered promiscuous mode
[  405.702656] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  405.707811] br-wifi: port 10(e-ownc-wifi) entered forwarding state
[  405.728611] br-service: port 12(e-ownc-srv) entered blocking state
[  405.733390] br-service: port 12(e-ownc-srv) entered disabled state
[  405.735602] device e-ownc-srv entered promiscuous mode
[  405.745322] br-service: port 12(e-ownc-srv) entered blocking state
[  405.750803] br-service: port 12(e-ownc-srv) entered forwarding state
[  405.778329] br-factory: port 11(e-ownc-fact) entered blocking state
[  405.783440] br-factory: port 11(e-ownc-fact) entered disabled state
[  405.783991] device e-ownc-fact entered promiscuous mode
[  405.785073] br-factory: port 11(e-ownc-fact) entered blocking state
[  405.785087] br-factory: port 11(e-ownc-fact) entered forwarding state
[  406.116970] EXT4-fs (dm-65): couldn't mount as ext3 due to feature incompatibilities
[  406.226863] EXT4-fs (dm-65): recovery complete
[  406.239328] EXT4-fs (dm-65): mounted filesystem with ordered data mode. Opts: (null)
[  406.259518] eth-admin: renamed from vethBFOYTH
[  406.321857] eth-user: renamed from vethBK6RIY
[  406.408396] br-user: port 12(e-ownc-usr) entered disabled state
[  406.414127] br-wifi: port 10(e-ownc-wifi) entered disabled state
[  406.419954] br-service: port 12(e-ownc-srv) entered disabled state
[  406.435728] br-factory: port 11(e-ownc-fact) entered disabled state
[  406.441107] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  406.453135] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-adm: link becomes ready
[  406.459094] br-admin: port 12(e-ownc-adm) entered blocking state
[  406.464563] br-admin: port 12(e-ownc-adm) entered forwarding state
[  406.483947] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-usr: link becomes ready
[  406.490795] br-user: port 12(e-ownc-usr) entered blocking state
[  406.495384] br-user: port 12(e-ownc-usr) entered forwarding state
[  406.502756] eth-wifi: renamed from vethY22AJL
[  406.586523] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-wifi: link becomes ready
[  406.593899] br-wifi: port 10(e-ownc-wifi) entered blocking state
[  406.598578] br-wifi: port 10(e-ownc-wifi) entered forwarding state
[  406.611335] eth-srv: renamed from veth85R7EE
[  406.652857] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  406.659464] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-srv: link becomes ready
[  406.665358] br-service: port 12(e-ownc-srv) entered blocking state
[  406.671052] br-service: port 12(e-ownc-srv) entered forwarding state
[  406.691996] eth-fact: renamed from vethITS16P
[  406.753014] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  406.758987] IPv6: ADDRCONF(NETDEV_CHANGE): e-ownc-fact: link becomes ready
[  406.767779] br-factory: port 11(e-ownc-fact) entered blocking state
[  406.772704] br-factory: port 11(e-ownc-fact) entered forwarding state
[  407.382830] EXT4-fs (dm-66): 1 orphan inode deleted
[  407.386391] EXT4-fs (dm-66): recovery complete
[  407.418262] EXT4-fs (dm-66): mounted filesystem with ordered data mode. Opts: (null)
[  407.482920] EXT4-fs (dm-67): recovery complete
[  407.489576] EXT4-fs (dm-67): mounted filesystem with ordered data mode. Opts: (null)
[  407.620379] EXT4-fs (dm-48): re-mounted. Opts: (null)
[  407.751444] EXT4-fs (dm-68): 6 orphan inodes deleted
[  407.755291] EXT4-fs (dm-68): recovery complete
[  407.798251] EXT4-fs (dm-68): mounted filesystem with ordered data mode. Opts: (null)
[  408.065853] EXT4-fs (dm-69): recovery complete
[  408.075043] EXT4-fs (dm-69): mounted filesystem with ordered data mode. Opts: (null)
[  408.244471] EXT4-fs (dm-1): re-mounted. Opts: (null)
[  408.494763] EXT4-fs (dm-70): recovery complete
[  408.500858] EXT4-fs (dm-70): mounted filesystem with ordered data mode. Opts: (null)
[  408.538874] EXT4-fs (dm-71): recovery complete
[  408.543632] EXT4-fs (dm-71): mounted filesystem with ordered data mode. Opts: (null)
[  408.662895] EXT4-fs (dm-72): recovery complete
[  408.667686] EXT4-fs (dm-72): mounted filesystem with ordered data mode. Opts: (null)
[  408.694708] EXT4-fs (dm-73): recovery complete
[  408.699685] EXT4-fs (dm-73): mounted filesystem with ordered data mode. Opts: (null)
[  408.936852] EXT4-fs (dm-74): recovery complete
[  408.943342] EXT4-fs (dm-74): mounted filesystem with ordered data mode. Opts: (null)
[  409.046684] EXT4-fs (dm-75): recovery complete
[  409.054251] EXT4-fs (dm-75): mounted filesystem with ordered data mode. Opts: (null)
[  409.227884] br-admin: port 13(e-vpn-adm) entered blocking state
[  409.232419] br-admin: port 13(e-vpn-adm) entered disabled state
[  409.233259] device e-vpn-adm entered promiscuous mode
[  409.276817] br-user: port 13(e-vpn-usr) entered blocking state
[  409.281624] br-user: port 13(e-vpn-usr) entered disabled state
[  409.282500] device e-vpn-usr entered promiscuous mode
[  409.283497] br-user: port 13(e-vpn-usr) entered blocking state
[  409.298047] br-user: port 13(e-vpn-usr) entered forwarding state
[  409.331578] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  409.336016] br-vpn: port 7(e-vpn-vpn) entered disabled state
[  409.336620] device e-vpn-vpn entered promiscuous mode
[  409.348306] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  409.348319] br-vpn: port 7(e-vpn-vpn) entered forwarding state
[  409.415778] br-service: port 13(e-vpn-srv) entered blocking state
[  409.421058] br-service: port 13(e-vpn-srv) entered disabled state
[  409.427663] device e-vpn-srv entered promiscuous mode
[  409.432452] br-service: port 13(e-vpn-srv) entered blocking state
[  409.432460] br-service: port 13(e-vpn-srv) entered forwarding state
[  409.474411] br-factory: port 12(e-vpn-fact) entered blocking state
[  409.479176] br-factory: port 12(e-vpn-fact) entered disabled state
[  409.479582] device e-vpn-fact entered promiscuous mode
[  409.498081] br-factory: port 12(e-vpn-fact) entered blocking state
[  409.502845] br-factory: port 12(e-vpn-fact) entered forwarding state
[  409.854322] EXT4-fs (dm-103): couldn't mount as ext3 due to feature incompatibilities
[  409.977018] NFSD: attempt to initialize umh client tracking in a container ignored.
[  409.998616] NFSD: attempt to initialize legacy client tracking in a container ignored.
[  410.029682] NFSD: Unable to initialize client recovery tracking! (-22)
[  410.041644] NFSD: starting 90-second grace period (net f000092d)
[  410.055473] EXT4-fs (dm-103): recovery complete
[  410.063693] EXT4-fs (dm-103): mounted filesystem with ordered data mode. Opts: (null)
[  410.079379] eth-admin: renamed from veth4TN6XB
[  410.195487] eth-user: renamed from vethADWAG8
[  410.297277] br-user: port 13(e-vpn-usr) entered disabled state
[  410.313665] br-vpn: port 7(e-vpn-vpn) entered disabled state
[  410.319903] br-service: port 13(e-vpn-srv) entered disabled state
[  410.325932] br-factory: port 12(e-vpn-fact) entered disabled state
[  410.335760] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  410.341649] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-adm: link becomes ready
[  410.352473] br-admin: port 13(e-vpn-adm) entered blocking state
[  410.357098] br-admin: port 13(e-vpn-adm) entered forwarding state
[  410.369002] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  410.374899] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-usr: link becomes ready
[  410.383512] br-user: port 13(e-vpn-usr) entered blocking state
[  410.387991] br-user: port 13(e-vpn-usr) entered forwarding state
[  410.414268] eth-vpn: renamed from vethM96FEH
[  410.472985] eth-srv: renamed from veth3IK7D8
[  410.522366] IPv6: ADDRCONF(NETDEV_CHANGE): eth-vpn: link becomes ready
[  410.528129] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-vpn: link becomes ready
[  410.538326] br-vpn: port 7(e-vpn-vpn) entered blocking state
[  410.542599] br-vpn: port 7(e-vpn-vpn) entered forwarding state
[  410.551869] eth-fact: renamed from vethVX1Q6D
[  410.604725] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  410.612415] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-srv: link becomes ready
[  410.622068] br-service: port 13(e-vpn-srv) entered blocking state
[  410.626828] br-service: port 13(e-vpn-srv) entered forwarding state
[  410.678789] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  410.687418] IPv6: ADDRCONF(NETDEV_CHANGE): e-vpn-fact: link becomes ready
[  410.693413] br-factory: port 12(e-vpn-fact) entered blocking state
[  410.699015] br-factory: port 12(e-vpn-fact) entered forwarding state
[  410.836740] EXT4-fs (dm-104): 1 orphan inode deleted
[  410.841078] EXT4-fs (dm-104): recovery complete
[  410.863614] EXT4-fs (dm-104): mounted filesystem with ordered data mode. Opts: (null)
[  410.923792] EXT4-fs (dm-105): recovery complete
[  410.930898] EXT4-fs (dm-105): mounted filesystem with ordered data mode. Opts: (null)
[  411.005213] EXT4-fs (dm-106): recovery complete
[  411.010841] EXT4-fs (dm-106): mounted filesystem with ordered data mode. Opts: (null)
[  411.121749] EXT4-fs (dm-107): recovery complete
[  411.126613] EXT4-fs (dm-107): mounted filesystem with ordered data mode. Opts: (null)
[  411.207448] EXT4-fs (dm-108): recovery complete
[  411.212264] EXT4-fs (dm-108): mounted filesystem with ordered data mode. Opts: (null)
[  411.251349] EXT4-fs (dm-109): recovery complete
[  411.256148] EXT4-fs (dm-109): mounted filesystem with ordered data mode. Opts: (null)
[  411.391366] EXT4-fs (dm-66): re-mounted. Opts: (null)
[  411.398255] EXT4-fs (dm-110): recovery complete
[  411.402982] EXT4-fs (dm-110): mounted filesystem with ordered data mode. Opts: (null)
[  411.493507] EXT4-fs (dm-111): recovery complete
[  411.499360] EXT4-fs (dm-111): mounted filesystem with ordered data mode. Opts: (null)
[  411.647374] br-admin: port 14(e-ssh-adm) entered blocking state
[  411.651877] br-admin: port 14(e-ssh-adm) entered disabled state
[  411.658088] device e-ssh-adm entered promiscuous mode
[  411.689179] br-user: port 14(e-ssh-usr) entered blocking state
[  411.693692] br-user: port 14(e-ssh-usr) entered disabled state
[  411.695269] device e-ssh-usr entered promiscuous mode
[  411.705857] br-user: port 14(e-ssh-usr) entered blocking state
[  411.710431] br-user: port 14(e-ssh-usr) entered forwarding state
[  411.743999] br-service: port 14(e-ssh-srv) entered blocking state
[  411.748936] br-service: port 14(e-ssh-srv) entered disabled state
[  411.749578] device e-ssh-srv entered promiscuous mode
[  411.806556] br-service: port 14(e-ssh-srv) entered blocking state
[  411.811221] br-service: port 14(e-ssh-srv) entered forwarding state
[  411.862942] br-factory: port 13(e-ssh-fact) entered blocking state
[  411.878128] br-factory: port 13(e-ssh-fact) entered disabled state
[  411.884370] device e-ssh-fact entered promiscuous mode
[  411.885064] br-factory: port 13(e-ssh-fact) entered blocking state
[  411.894596] br-factory: port 13(e-ssh-fact) entered forwarding state
[  412.188435] EXT4-fs (dm-112): couldn't mount as ext3 due to feature incompatibilities
[  412.554981] EXT4-fs (dm-112): recovery complete
[  412.570250] EXT4-fs (dm-112): mounted filesystem with ordered data mode. Opts: (null)
[  412.597022] eth-admin: renamed from vethLM8LT6
[  412.679007] br-user: port 14(e-ssh-usr) entered disabled state
[  412.686397] br-service: port 14(e-ssh-srv) entered disabled state
[  412.693656] br-factory: port 13(e-ssh-fact) entered disabled state
[  412.743073] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  412.748999] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-adm: link becomes ready
[  412.755629] br-admin: port 14(e-ssh-adm) entered blocking state
[  412.761010] br-admin: port 14(e-ssh-adm) entered forwarding state
[  412.767199] eth-user: renamed from veth4ME697
[  412.822580] IPv6: ADDRCONF(NETDEV_CHANGE): eth-user: link becomes ready
[  412.828448] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-usr: link becomes ready
[  412.835084] br-user: port 14(e-ssh-usr) entered blocking state
[  412.840357] br-user: port 14(e-ssh-usr) entered forwarding state
[  412.847898] eth-srv: renamed from veth302LC1
[  412.887246] eth-fact: renamed from vethRQEQUT
[  412.920974] IPv6: ADDRCONF(NETDEV_CHANGE): eth-srv: link becomes ready
[  412.926839] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-srv: link becomes ready
[  412.933323] br-service: port 14(e-ssh-srv) entered blocking state
[  412.938865] br-service: port 14(e-ssh-srv) entered forwarding state
[  412.943585] IPv6: ADDRCONF(NETDEV_CHANGE): eth-fact: link becomes ready
[  412.958813] IPv6: ADDRCONF(NETDEV_CHANGE): e-ssh-fact: link becomes ready
[  412.959242] br-factory: port 13(e-ssh-fact) entered blocking state
[  412.970343] br-factory: port 13(e-ssh-fact) entered forwarding state
[  413.255291] EXT4-fs (dm-113): 1 orphan inode deleted
[  413.258872] EXT4-fs (dm-113): recovery complete
[  413.307420] EXT4-fs (dm-113): mounted filesystem with ordered data mode. Opts: (null)
[  413.414424] EXT4-fs (dm-114): recovery complete
[  413.426278] EXT4-fs (dm-114): mounted filesystem with ordered data mode. Opts: (null)
[  413.580283] EXT4-fs (dm-115): recovery complete
[  413.590297] EXT4-fs (dm-115): mounted filesystem with ordered data mode. Opts: (null)
[  413.706766] EXT4-fs (dm-116): recovery complete
[  413.718272] EXT4-fs (dm-116): mounted filesystem with ordered data mode. Opts: (null)
[  414.188275] EXT4-fs (dm-117): 2 orphan inodes deleted
[  414.205941] EXT4-fs (dm-104): re-mounted. Opts: (null)
[  414.211171] EXT4-fs (dm-117): recovery complete
[  414.243098] EXT4-fs (dm-117): mounted filesystem with ordered data mode. Opts: (null)
[  414.586695] EXT4-fs (dm-118): recovery complete
[  414.595779] EXT4-fs (dm-118): mounted filesystem with ordered data mode. Opts: (null)
[  415.118549] EXT4-fs (dm-119): recovery complete
[  415.126237] EXT4-fs (dm-119): mounted filesystem with ordered data mode. Opts: (null)
[  415.718508] EXT4-fs (dm-120): recovery complete
[  415.723729] EXT4-fs (dm-120): mounted filesystem with ordered data mode. Opts: (null)
[  415.935717] br-admin: port 15(s-stre-adm) entered blocking state
[  415.940334] br-admin: port 15(s-stre-adm) entered disabled state
[  415.941020] device s-stre-adm entered promiscuous mode
[  415.972662] br-user: port 15(s-stre-usr) entered blocking state
[  415.977216] br-user: port 15(s-stre-usr) entered disabled state
[  415.977617] device s-stre-usr entered promiscuous mode
[  415.988897] br-user: port 15(s-stre-usr) entered blocking state
[  415.994078] br-user: port 15(s-stre-usr) entered forwarding state
[  416.020598] br-service: port 15(s-stre-srv) entered blocking state
[  416.025351] br-service: port 15(s-stre-srv) entered disabled state
[  416.028117] device s-stre-srv entered promiscuous mode
[  416.037324] br-service: port 15(s-stre-srv) entered blocking state
[  416.042780] br-service: port 15(s-stre-srv) entered forwarding state
[  416.079993] br-factory: port 14(s-stre-fact) entered blocking state
[  416.085472] br-factory: port 14(s-stre-fact) entered disabled state
[  416.091735] device s-stre-fact entered promiscuous mode
[  416.108157] br-factory: port 14(s-stre-fact) entered blocking state
[  416.113005] br-factory: port 14(s-stre-fact) entered forwarding state
[  416.352640] EXT4-fs (dm-28): couldn't mount as ext3 due to feature incompatibilities
[  416.534748] EXT4-fs (dm-28): recovery complete
[  416.546261] EXT4-fs (dm-28): mounted filesystem with ordered data mode. Opts: (null)
[  416.560613] eth-admin: renamed from veth0EO5OW
[  416.607189] eth-user: renamed from vethTULXDR
[  416.678374] br-user: port 15(s-stre-usr) entered disabled state
[  416.683539] br-service: port 15(s-stre-srv) entered disabled state
[  416.699230] br-factory: port 14(s-stre-fact) entered disabled state
[  416.704415] IPv6: ADDRCONF(NETDEV_CHANGE): eth-admin: link becomes ready
[  416.712314] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-adm: link becomes ready
[  416.722055] br-admin: port 15(s-stre-adm) entered blocking state
[  416.726643] br-admin: port 15(s-stre-adm) entered forwarding state
[  416.744344] eth-srv: renamed from vethTT6UTG
[  416.796913] eth-fact: renamed from vethF1BMBC
[  416.847920] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-usr: link becomes ready
[  416.853885] br-user: port 15(s-stre-usr) entered blocking state
[  416.859195] br-user: port 15(s-stre-usr) entered forwarding state
[  416.866273] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-srv: link becomes ready
[  416.874615] br-service: port 15(s-stre-srv) entered blocking state
[  416.879376] br-service: port 15(s-stre-srv) entered forwarding state
[  416.892900] IPv6: ADDRCONF(NETDEV_CHANGE): s-stre-fact: link becomes ready
[  416.899259] br-factory: port 14(s-stre-fact) entered blocking state
[  416.904616] br-factory: port 14(s-stre-fact) entered forwarding state
[  417.209680] EXT4-fs (dm-29): 1 orphan inode deleted
[  417.213797] EXT4-fs (dm-29): recovery complete
[  417.230696] EXT4-fs (dm-29): mounted filesystem with ordered data mode. Opts: (null)
[  417.256246] EXT4-fs (dm-30): recovery complete
[  417.260681] EXT4-fs (dm-30): mounted filesystem with ordered data mode. Opts: (null)
[  417.356345] EXT4-fs (dm-31): recovery complete
[  417.360758] EXT4-fs (dm-31): mounted filesystem with ordered data mode. Opts: (null)
[  417.384361] EXT4-fs (dm-32): recovery complete
[  417.388922] EXT4-fs (dm-32): mounted filesystem with ordered data mode. Opts: (null)
[  417.436634] EXT4-fs (dm-33): recovery complete
[  417.441085] EXT4-fs (dm-33): mounted filesystem with ordered data mode. Opts: (null)
[  417.545099] EXT4-fs (dm-34): 2 orphan inodes deleted
[  417.548638] EXT4-fs (dm-34): recovery complete
[  417.560906] EXT4-fs (dm-34): mounted filesystem with ordered data mode. Opts: (null)
[  417.648395] EXT4-fs (dm-35): recovery complete
[  417.653230] EXT4-fs (dm-35): mounted filesystem with ordered data mode. Opts: (null)
[  417.705934] EXT4-fs (dm-36): recovery complete
[  417.710696] EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: (null)
[  418.196261] EXT4-fs (dm-29): re-mounted. Opts: (null)
[  419.154125] EXT4-fs (dm-113): re-mounted. Opts: (null)

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: [  434.779442] br-wifi: port 1(eth-wifi) entered blocking state
[  434.814254] br-wifi: port 1(eth-wifi) entered disabled state
[  434.839066] device eth-wifi entered promiscuous mode
[  435.054102] br-wifi: port 1(eth-wifi) entered blocking state
[  435.058390] br-wifi: port 1(eth-wifi) entered forwarding state

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: root
Password: 
Last login: Sat Jan  1 00:05:08 UTC 2000 on ttySAC2
/etc/update-motd.d/30-armbian-sysinfo: line 44: bc: command not found
  ___      _           _     _  __  ___   _ _  _   
 / _ \  __| |_ __ ___ (_) __| | \ \/ / | | | || |  
| | | |/ _` | '__/ _ \| |/ _` |  \  /| | | | || |_ 
| |_| | (_| | | | (_) | | (_| |  /  \| |_| |__   _|
 \___/ \__,_|_|  \___/|_|\__,_| /_/\_\\___/   |_|  
                                                   

Welcome to ARMBIAN 5.72 stable Debian GNU/Linux 9 (stretch) 5.0.1   
System load:   15.91 6.63 2.47  	Up time:       7 min		
Memory usage:  22 % of 1993MB 	IP:            192.168.57.65 192.168.54.65 192.168.56.65
CPU temp:      51°C           	
Usage of /:    19% of 15G    	

[ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ]


root@srv-hc1-110:~# uname -a
Linux srv-hc1-110 5.0.1 #1 SMP PREEMPT Fri Mar 15 18:29:10 CET 2019 armv7l GNU/Linux
root@srv-hc1-110:~# cat /proc/cmdline 
console=ttySAC2,115200n8 console=tty1 consoleblank=0 loglevel=7 panic=10 root=UUID=d5b30458-1d2f-4de2-aef9-afe3c6dd79d5 rootfstype=ext4 rootwait rw  smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi usb-storage.quirks=  s5p_mfc.mem=16M
root@srv-hc1-110:~# logout

Debian GNU/Linux 9 srv-hc1-110 ttySAC2

srv-hc1-110 login: 


- Jean Marc :) -

zupet
Posts: 26
Joined: Tue Dec 26, 2017 11:13 pm
languages_spoken: korean,english
ODROIDs: HC1
Has thanked: 0
Been thanked: 1 time
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by zupet » Thu Jul 11, 2019 10:59 pm

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.14.127-164 (root@1604_builder_armhf) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Wed Jun 19 17:28:22 -03 2019
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] On node 0 totalpages: 518656
[    0.000000] free_area_init_node: node 0, pgdat c0d8ec80, node_mem_map eee25000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 322048 pages, LIFO batch:31
[    0.000000] Running under secure firmware.
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x420 with crng_init=0
[    0.000000] percpu: Embedded 17 pages/cpu s37516 r8192 d23924 u69632
[    0.000000] pcpu-alloc: s37516 r8192 d23924 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0  HPD=true vout=hdmi usbhid.quirks=0x0eef:0x0005:0x0004 smsc95xx.macaddr=00:1e:06:61:7a:39 false s5p_mfc.mem=16M
[    0.000000] hdmi: using HDMI mode
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1900748K/2074624K available (8192K kernel code, 656K rwdata, 2352K rodata, 1024K init, 318K bss, 42804K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0900000   (9184 kB)
                     .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
                     .data : 0xc0d00000 - 0xc0da42a0   ( 657 kB)
                      .bss : 0xc0dac3a8 - 0xc0dfbee0   ( 319 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] hperf_hmp: fast CPUs mask: 000000F0
[    0.000000] hperf_hmp: slow CPUs mask: 0000000F
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000031] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[    0.001601] Console: colour dummy device 80x30
[    0.002275] console [tty1] enabled
[    0.002318] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002359] pid_max: default: 32768 minimum: 301
[    0.002556] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002595] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003469] CPU: Testing write buffer coherency: ok
[    0.004390] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.020047] Setting up static identity map for 0x40100000 - 0x40100060
[    0.020671] ARM CCI driver probed
[    0.020907] Exynos MCPM support installed
[    0.027990] Hierarchical SRCU implementation.
[    0.043988] smp: Bringing up secondary CPUs ...
[    0.072376] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.096330] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.124322] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.152369] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.152377] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.172366] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.172373] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.180685] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.180692] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.188666] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.188673] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.188929] smp: Brought up 1 node, 8 CPUs
[    0.188975] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.188998] CPU: All CPU(s) started in HYP mode.
[    0.189017] CPU: Virtualization extensions available.
[    0.190839] devtmpfs: initialized
[    0.207808] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.207964] hperf_hmp: registered cpufreq transition notifier
[    0.208154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.208188] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.210986] pinctrl core: initialized pinctrl subsystem
[    0.213162] NET: Registered protocol family 16
[    0.218411] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.224435] cpuidle: using governor menu
[    0.225240] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.225268] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.233634] exynos-audss-clk 3810000.audss-clock-controller: epll 180633609
[    0.256189] EXYNOS5420 PMU initialized
[    0.299336] usbcore: registered new interface driver usbfs
[    0.299407] usbcore: registered new interface driver hub
[    0.299555] usbcore: registered new device driver usb
[    0.300005] i2c-gpio soc:i2c-hdmi: using pins 177 (SDA) and 178 (SCL)
[    0.300597] s3c-i2c 12c70000.i2c: slave address 0x00
[    0.300624] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz
[    0.300854] s3c-i2c 12c70000.i2c: i2c-1: S3C I2C adapter
[    0.301374] media: Linux media interface: v0.10
[    0.301423] Linux video capture interface: v2.00
[    0.301529] pps_core: LinuxPPS API ver. 1 registered
[    0.301549] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.301812] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    0.302655] Advanced Linux Sound Architecture Driver Initialized.
[    0.303860] clocksource: Switched to clocksource mct-frc
[    0.364364] VFS: Disk quotas dquot_6.6.0
[    0.364451] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.378108] NET: Registered protocol family 2
[    0.378691] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.378788] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.378956] TCP: Hash tables configured (established 8192 bind 8192)
[    0.379071] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.379122] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.379331] NET: Registered protocol family 1
[    0.380062] RPC: Registered named UNIX socket transport module.
[    0.380137] RPC: Registered udp transport module.
[    0.380157] RPC: Registered tcp transport module.
[    0.380175] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.380404] Trying to unpack rootfs image as initramfs...
[    0.767883] random: fast init done
[    0.908004] Freeing initrd memory: 9592K
[    0.909559] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.910735] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.914203] audit: initializing netlink subsys (disabled)
[    0.914412] audit: type=2000 audit(0.908:1): state=initialized audit_enabled=0 res=1
[    0.914958] Initialise system trusted keyrings
[    0.915134] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.922108] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.922970] NFS: Registering the id_resolver key type
[    0.923011] Key type id_resolver registered
[    0.923029] Key type id_legacy registered
[    0.923057] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.923112] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.927792] Key type asymmetric registered
[    0.927816] Asymmetric key parser 'x509' registered
[    0.927917] bounce: pool size: 64 pages
[    0.927978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.928201] io scheduler noop registered
[    0.928223] io scheduler deadline registered
[    0.928378] io scheduler cfq registered (default)
[    0.928399] io scheduler mq-deadline registered
[    0.928418] io scheduler kyber registered
[    0.928652] io scheduler bfq registered
[    0.931048] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[    0.932087] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[    0.932173] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[    0.932543] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[    0.932633] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[    0.937530] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    0.937557] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    0.940161] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.940187] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.942745] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.942771] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.943602] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    0.943628] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    1.008060] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.010370] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    1.010778] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    1.011165] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    1.947687] console [ttySAC2] enabled
[    1.951667] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    1.962332] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu
[    1.968344] iommu: Adding device 14450000.mixer to group 0
[    1.975415] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[    1.981297] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[    1.988074] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[    1.995379] iommu: Adding device 10850000.g2d to group 1
[    2.000990] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully probed.
[    2.009607] exynos-rot 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[    2.015926] iommu: Adding device 11c00000.rotator to group 2
[    2.021869] exynos-rot 11c00000.rotator: The exynos rotator is probed successfully
[    2.029871] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.040335] mali 11800000.mali: Continuing without Mali regulator control
[    2.046453] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    2.052701] mali 11800000.mali: Protected mode not available
[    2.058251] devfreq devfreq0: Couldn't update frequency transition information.
[    2.065819] mali 11800000.mali: Probed as mali0
[    2.079230] brd: module loaded
[    2.081488] libphy: Fixed MDIO Bus: probed
[    2.085270] usbcore: registered new interface driver r8152
[    2.090435] usbcore: registered new interface driver cdc_ether
[    2.096221] usbcore: registered new interface driver cdc_subset
[    2.104227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.109325] ehci-exynos: EHCI EXYNOS driver
[    2.113805] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.118952] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    2.126875] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000
[    2.147912] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.152778] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.159243] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.166430] usb usb1: Product: EHCI Host Controller
[    2.171306] usb usb1: Manufacturer: Linux 4.14.127-164 ehci_hcd
[    2.177174] usb usb1: SerialNumber: 12110000.usb
[    2.182320] hub 1-0:1.0: USB hub found
[    2.185532] hub 1-0:1.0: 3 ports detected
[    2.190411] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.195651] ohci-exynos: OHCI EXYNOS driver
[    2.200024] exynos-ohci 12120000.usb: USB Host Controller
[    2.205180] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    2.212891] exynos-ohci 12120000.usb: irq 80, io mem 0x12120000
[    2.280151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.285505] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.293488] usb usb2: Product: USB Host Controller
[    2.297457] usb usb2: Manufacturer: Linux 4.14.127-164 ohci_hcd
[    2.303347] usb usb2: SerialNumber: 12120000.usb
[    2.308448] hub 2-0:1.0: USB hub found
[    2.311669] hub 2-0:1.0: 3 ports detected
[    2.317887] mousedev: PS/2 mouse device common for all mice
[    2.323285] i2c /dev entries driver
[    2.341519] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    2.363881] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    3.450302] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[    3.459318] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[    3.464906] iommu: Adding device 11f50000.jpeg to group 3
[    3.470571] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video30
[    3.477499] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video31
[    3.484425] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[    3.490099] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[    3.496867] iommu: Adding device 11f60000.jpeg to group 4
[    3.502529] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video32
[    3.509464] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video33
[    3.516399] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[    3.522977] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[    3.528926] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[    3.535789] iommu: Adding device 11000000.codec to group 5
[    3.559064] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
[    3.566776] (NULL device *): Direct firmware load for s5p-mfc-v8.fw failed with error -2
[    3.574746] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[    3.585303] s5p-mfc 11000000.codec: decoder registered as /dev/video10
[    3.591797] s5p-mfc 11000000.codec: encoder registered as /dev/video11
[    3.599897] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[    3.606334] iommu: Adding device 13e00000.video-scaler to group 6
[    3.613636] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[    3.620202] iommu: Adding device 13e10000.video-scaler to group 7
[    3.646155] thermal thermal_zone0: failed to read out thermal zone (-22)
[    3.652334] thermal thermal_zone1: failed to read out thermal zone (-22)
[    3.659038] thermal thermal_zone2: failed to read out thermal zone (-22)
[    3.665722] thermal thermal_zone3: failed to read out thermal zone (-22)
[    3.672425] thermal thermal_zone4: failed to read out thermal zone (-22)
[    3.678863] device-mapper: uevent: version 1.0.3
[    3.683032] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.705456] sdhci: Secure Digital Host Controller Interface driver
[    3.710188] sdhci: Copyright(c) Pierre Ossman
[    3.714723] Synopsys Designware Multimedia Card Interface Driver
[    3.721093] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    3.727411] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    3.733753] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    3.739143] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
[    3.748547] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[    3.777106] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.804246] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.809702] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.816102] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.821482] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
[    3.852339] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    3.880970] ledtrig-cpu: registered to indicate activity on CPUs
[    3.889287] s5p-secss 10830000.sss: s5p-sss driver registered
[    3.893970] hidraw: raw HID events driver (C) Jiri Kosina
[    3.907106] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    3.912383] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    3.918964] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    3.925549] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    3.938209] NET: Registered protocol family 17
[    3.941422] NET: Registered protocol family 15
[    3.945654] Key type dns_resolver registered
[    3.950229] Registering SWP/SWPB emulation handler
[    3.954958] registered taskstats version 1
[    3.959749] Loading compiled-in X.509 certificates
[    3.969103] Key type encrypted registered
[    3.970673] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.998098] OF: graph: no port node found in /soc/hdmi@14530000
[    4.003423] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[    4.010401] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0966304)
[    4.016960] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc09669a4)
[    4.023525] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.030114] [drm] No driver support for vblank timestamp query.
[    4.036112] [drm] Cannot find any crtc or sizes
[    4.040960] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on minor 0
[    4.047895] [drm] Cannot find any crtc or sizes
[    4.053642] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    4.057684] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[    4.065514] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    4.074686] xhci-hcd xhci-hcd.3.auto: irq 149, io mem 0x12000000
[    4.080803] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    4.087393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.094583] usb usb3: Product: xHCI Host Controller
[    4.099434] usb usb3: Manufacturer: Linux 4.14.127-164 xhci-hcd
[    4.105327] usb usb3: SerialNumber: xhci-hcd.3.auto
[    4.110484] hub 3-0:1.0: USB hub found
[    4.113928] hub 3-0:1.0: 1 port detected
[    4.117998] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    4.123269] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    4.130900] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0  SuperSpeed
[    4.137531] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.145632] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    4.152296] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.159487] usb usb4: Product: xHCI Host Controller
[    4.164338] usb usb4: Manufacturer: Linux 4.14.127-164 xhci-hcd
[    4.170230] usb usb4: SerialNumber: xhci-hcd.3.auto
[    4.175380] hub 4-0:1.0: USB hub found
[    4.178830] hub 4-0:1.0: 1 port detected
[    4.183112] mmc1: new ultra high speed SDR104 SDXC card at address 0001
[    4.187097] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    4.190254] mmcblk1: mmc1:0001 EC2QT 59.6 GiB 
[    4.194762] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[    4.201201]  mmcblk1: p1 p2
[    4.210111] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    4.218970] xhci-hcd xhci-hcd.6.auto: irq 150, io mem 0x12400000
[    4.225043] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.231670] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.238869] usb usb5: Product: xHCI Host Controller
[    4.243714] usb usb5: Manufacturer: Linux 4.14.127-164 xhci-hcd
[    4.249606] usb usb5: SerialNumber: xhci-hcd.6.auto
[    4.254739] hub 5-0:1.0: USB hub found
[    4.258206] hub 5-0:1.0: 1 port detected
[    4.262278] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    4.267550] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[    4.275180] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0  SuperSpeed
[    4.281809] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.289911] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    4.296575] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.303764] usb usb6: Product: xHCI Host Controller
[    4.308618] usb usb6: Manufacturer: Linux 4.14.127-164 xhci-hcd
[    4.314509] usb usb6: SerialNumber: xhci-hcd.6.auto
[    4.319645] hub 6-0:1.0: USB hub found
[    4.323111] hub 6-0:1.0: 1 port detected
[    4.327985] rtc rtc1: invalid alarm value: 1900-1-9 0:0:0
[    4.332466] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[    4.339679] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[    4.347168] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[    4.355106] exynos-bus: new bus device registered: soc:bus_fsys_apb (200000 KHz ~ 200000 KHz)
[    4.363548] exynos-bus: new bus device registered: soc:bus_fsys (200000 KHz ~ 200000 KHz)
[    4.371814] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[    4.380148] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[    4.388168] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[    4.396159] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
[    4.404388] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[    4.412404] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[    4.420818] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[    4.428956] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[    4.437378] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[    4.446079] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[    4.454311] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[    4.463140] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[    4.471186] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    4.478838] samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
[    4.487342] odroid-audio sound: multicodec <-> 3830000.i2s mapping ok
[    4.496483] s5m-rtc s2mps14-rtc: setting system clock to 2019-07-11 01:59:48 UTC (1562810388)
[    4.508465] ALSA device list:
[    4.509955]   #0: Odroid-XU4
[    4.513911] Freeing unused kernel memory: 1024K
[    4.624086] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    4.780685] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[    4.785942] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.793042] usb 3-1: Product: USB2.0 Hub
[    4.796933] usb 3-1: Manufacturer: GenesysLogic
[    4.809932] hub 3-1:1.0: USB hub found
[    4.812708] hub 3-1:1.0: 2 ports detected
[    4.904035] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.930720] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616
[    4.935976] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.943069] usb 4-1: Product: USB3.0 Hub
[    4.947026] usb 4-1: Manufacturer: GenesysLogic
[    4.954089] hub 4-1:1.0: USB hub found
[    4.956711] hub 4-1:1.0: 2 ports detected
[    5.139927] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd
[    5.487989] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.512810] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153
[    5.518069] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    5.525168] usb 6-1: Product: USB 10/100/1000 LAN
[    5.529850] usb 6-1: Manufacturer: Realtek
[    5.533917] usb 6-1: SerialNumber: 000001000000
[    5.705909] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    5.772897] r8152 6-1:1.0 eth0: v1.09.9
[    5.915995] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
[    5.923920] raid6: int32x1  gen()   447 MB/s
[    5.940977] usb 4-1.1: New USB device found, idVendor=152d, idProduct=0561
[    5.946416] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    5.953701] usb 4-1.1: Product: JMS56x Series
[    5.958008] usb 4-1.1: Manufacturer: JMicron
[    5.962254] usb 4-1.1: SerialNumber: DB0123457749
[    5.991926] raid6: int32x1  xor()   514 MB/s
[    5.997613] SCSI subsystem initialized
[    6.001443] usbcore: registered new interface driver usb-storage
[    6.014229] scsi host0: uas
[    6.015799] usbcore: registered new interface driver uas
[    6.017169] scsi 0:0:0:0: Direct-Access     ST8000DM 004-2CX188       0004 PQ: 0 ANSI: 6
[    6.030449] scsi 0:0:0:1: Direct-Access     ST8000AS 0002-1NA17Z      0004 PQ: 0 ANSI: 6
[    6.044635] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    6.044766] sd 0:0:0:1: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    6.051370] sd 0:0:0:0: [sda] Write Protect is off
[    6.059077] sd 0:0:0:1: [sdb] Write Protect is off
[    6.060006] raid6: int32x2  gen()   662 MB/s
[    6.063569] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
[    6.064421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    6.068401] sd 0:0:0:1: [sdb] Mode Sense: 67 00 10 08
[    6.073306] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    6.081688] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    6.107115] sd 0:0:0:1: [sdb] Optimal transfer size 33553920 bytes
[    6.110206] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.127945] raid6: int32x2  xor()   637 MB/s
[    6.132932] sd 0:0:0:1: [sdb] Attached SCSI disk
[    6.195962] raid6: int32x4  gen()   757 MB/s
[    6.263910] raid6: int32x4  xor()   703 MB/s
[    6.331871] raid6: int32x8  gen()  1037 MB/s
[    6.399879] raid6: int32x8  xor()   671 MB/s
[    6.467889] raid6: neonx1   gen()  1752 MB/s
[    6.535875] raid6: neonx1   xor()  2517 MB/s
[    6.603868] raid6: neonx2   gen()  2508 MB/s
[    6.671865] raid6: neonx2   xor()  3352 MB/s
[    6.739874] raid6: neonx4   gen()  3117 MB/s
[    6.807898] raid6: neonx4   xor()  3071 MB/s
[    6.875902] raid6: neonx8   gen()  3689 MB/s
[    6.943900] raid6: neonx8   xor()  2915 MB/s
[    6.946685] raid6: using algorithm neonx8 gen() 3689 MB/s
[    6.952103] raid6: .... xor() 2915 MB/s, rmw enabled
[    6.957023] raid6: using neon recovery algorithm
[    6.962175] xor: measuring software checksum speed
[    7.003881]    arm4regs  :  3181.000 MB/sec
[    7.043893]    8regs     :  2671.000 MB/sec
[    7.083861]    32regs    :  2668.000 MB/sec
[    7.123860]    neon      :  4356.000 MB/sec
[    7.126561] xor: using function: neon (4356.000 MB/sec)
[    7.132170] async_tx: api initialized (async)
[    7.179555] Btrfs loaded, crc32c=crc32c-generic
[    7.659811] BTRFS: device fsid 49a0c33c-935a-4ce1-ba03-5e3b660d40e6 devid 2 transid 292 /dev/sdb
[    7.667600] BTRFS: device fsid 49a0c33c-935a-4ce1-ba03-5e3b660d40e6 devid 1 transid 292 /dev/sda
[    7.788957] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[    7.958488] random: crng init done
[    8.139311] NET: Registered protocol family 10
[    8.142993] Segment Routing with IPv6
[    8.148278] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.168543] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    8.188696] systemd[1]: Detected architecture arm.
[    8.216665] systemd[1]: Set hostname to <odroid>.
[    8.518031] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.544344] systemd[1]: Created slice System Slice.
[    8.568250] systemd[1]: Listening on Journal Audit Socket.
[    8.588126] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.612094] systemd[1]: Listening on udev Control Socket.
[    8.632246] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.652068] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.830449] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[    9.005847] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
[    9.015898] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned.
[    9.025230] spidev spi1.0: spidev spi1.0 1000kHz 8 bits mode=0x00
[    9.030429] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    9.036700] spidev spi1.0: Deleting spi1.0
[    9.040923] fbtft_device: GPIOS used by 'hktft9340':
[    9.045328] fbtft_device: 'reset' = GPIO21
[    9.049393] fbtft_device: 'dc' = GPIO22
[    9.053206] fbtft_device: 'led' = GPIO18
[    9.057115] spi spi1.1: ads7846 spi1.1 1000kHz 8 bits mode=0x00
[    9.063009] spi spi1.0: fb_ili9340 spi1.0 35000kHz 8 bits mode=0x00
[    9.408945] systemd-journald[299]: Received request to flush runtime journal from PID 1
[    9.725919] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 2
[    9.726265] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[    9.726273] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[    9.733800] fb_ili9340: module is from the staging directory, the quality is unknown, you have been warned.
[    9.735830] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[   10.220954] Console: switching to colour frame buffer device 40x15
[   10.221173] graphics fb0: fb_ili9340 frame buffer, 320x240, 150 KiB video memory, 4 KiB buffer memory, fps=20, spi1.0 at 35 MHz
[   11.737585] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.737714] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   12.434797] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   13.783337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.788862] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.818678] r8152 6-1:1.0 eth0: carrier on
[   13.818745] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2391.288999] BTRFS info (device sda): disk space caching is enabled
[ 2391.289020] BTRFS info (device sda): has skinny extents
[ 2393.696155] BTRFS info (device sda): checking UUID tree
[ 2448.356963] BTRFS: device fsid b6477717-bc17-40b5-a1e9-1986dbb661a6 devid 1 transid 5 /dev/sda
[ 2448.481790] BTRFS: device fsid b6477717-bc17-40b5-a1e9-1986dbb661a6 devid 2 transid 5 /dev/sdb
[ 2453.647323] BTRFS info (device sdb): disk space caching is enabled
[ 2453.647336] BTRFS info (device sdb): has skinny extents
[ 2453.647346] BTRFS info (device sdb): flagging fs with big metadata feature
[ 2453.657542] BTRFS info (device sdb): creating UUID tree
[ 2533.472532] BTRFS info (device sdb): disk space caching is enabled
[ 2533.472567] BTRFS info (device sdb): has skinny extents
[15876.601496] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
[24563.786425] xhci-hcd xhci-hcd.3.auto: ERROR unknown event type 37
I'm getting same message with official ubuntu-18.04.1-4.14-minimal-odroid-xu4-20181203.img
my xu4 is connection with odroid CloudShell2.

User avatar
odroid
Site Admin
Posts: 31297
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Has thanked: 44 times
Been thanked: 179 times
Contact:

Re: ODROID HC1 and a lot of "ERROR unknown event type 37"

Unread post by odroid » Fri Jul 12, 2019 8:03 am

@zupet,
I think the btrfs might cause the issue. Try EXT4 file system to narrow down root causes.

Post Reply

Return to “General Topics”

Who is online

Users browsing this forum: No registered users and 2 guests