UPS3 board is coming soon.

Moderators: mdrjr, odroid

UPS3 board is coming soon.

Unread postby odroid » Thu Apr 21, 2016 1:24 pm

The UPS3 is designed specifically for the ODROID-C1 / C1+ / C2.
Image

Uninterrupted Power Supply is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.
The on-battery runtime of most uninterruptible power sources is relatively short but sufficient to start a standby power source or properly shut down the ODROID.
It is equipped with a rechargeable 3,000mAh Lithium Polymer battery and a charger with a booster IC for 5V output.
When the AC power source fails, the UPS3 keeps supplying the power to the ODROID-C1/C1+/C2 with the battery.
There is a digital output pin to notice the battery low-level warning to the ODROIDs to trigger the shutdown process.
And the AC power source available, UPS3 will supply the power to the ODROID board again automatically.
It will significantly reduce the risk of data loss by sudden power-down.

Thanks to the 40pin connector with long pins, you can stack an add-on board on the UPS3.
Image

Full guide, schematics, PCB layout file and detail information is in our WiKi : http://odroid.com/dokuwiki/doku.php?id=en:odroid-ups3

We will start to sell this item from April 25.
User avatar
odroid
Site Admin
 
Posts: 28859
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Return to UPS

Who is online

Users browsing this forum: No registered users and 3 guests