Show2 with arduino IDE, Sync error

Post Reply
nawut.com
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.
Location: Thailand
Contact:

Show2 with arduino IDE, Sync error

Unread post by nawut.com » Mon Feb 05, 2018 3:25 pm

Hello

I try to test Odroid Show2 with arduino IDE , have some problem


avrdude: stk500_getsync(): not in sync: resp=0x00


Remark :: I bought several devices.And I'm try to testing all,
I have to apologize for asking a lot of questions. Since I'm newbie.

Thank you.
Attachments
error1.png
error1.png (20.49 KiB) Viewed 961 times
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".

User avatar
odroid
Site Admin
Posts: 29367
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: Show2 with arduino IDE, Sync error

Unread post by odroid » Mon Feb 05, 2018 5:36 pm

No problem.
Did you follow this guide to build/upload the firmware?
https://wiki.odroid.com/accessory/displ ... ow/setting
I think you have to check the "DTR reset jumper" on the Show2 board first.

nawut.com
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.
Location: Thailand
Contact:

Re: Show2 with arduino IDE, Sync error

Unread post by nawut.com » Mon Feb 05, 2018 10:19 pm

odroid wrote:No problem.
Did you follow this guide to build/upload the firmware?
https://wiki.odroid.com/accessory/displ ... ow/setting
I think you have to check the "DTR reset jumper" on the Show2 board first.
Thank you for your message. I try it on windows follow the document. after I connect the jumper and upload again, The attachment is the result .
Attachments
error3.png
error3.png (49.02 KiB) Viewed 950 times
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".

nawut.com
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.
Location: Thailand
Contact:

Re: Show2 with arduino IDE, Sync error

Unread post by nawut.com » Mon Feb 05, 2018 11:38 pm

Now, I try on linux follow on https://wiki.odroid.com/accessory/displ ... ow/setting.

The attachment is the result .
Attachments
Screenshot from 2018-02-05 20-40-13.png
Screenshot from 2018-02-05 20-40-13.png (419.2 KiB) Viewed 947 times
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".

User avatar
odroid
Site Admin
Posts: 29367
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID
Contact:

Re: Show2 with arduino IDE, Sync error

Unread post by odroid » Tue Feb 06, 2018 9:16 am

Can you find "/dev/ttyUSB0" on Ubuntu?

nawut.com
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.
Location: Thailand
Contact:

Re: Show2 with arduino IDE, Sync error

Unread post by nawut.com » Tue Feb 06, 2018 12:19 pm

odroid wrote:Can you find "/dev/ttyUSB0" on Ubuntu?

Yes, I do command #ls /dev/tty* , it have ttyUSB0.
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".

User avatar
rooted
Posts: 6079
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Contact:

Re: Show2 with arduino IDE, Sync error

Unread post by rooted » Tue Feb 06, 2018 3:21 pm

nawut.com wrote:
odroid wrote:Can you find "/dev/ttyUSB0" on Ubuntu?

Yes, I do command #ls /dev/tty* , it have ttyUSB0.
Try:

Code: Select all

sudo chmod 777 /dev/ttyUSB0
666 would work but it's just a test to see if you have write permission.

After changing permissions try flashing again without running the GUI in sudo

Post Reply

Return to “SHOW”

Who is online

Users browsing this forum: No registered users and 2 guests