Show2 with arduino IDE, Sync error

Moderators: odroid, mdrjr

Show2 with arduino IDE, Sync error

Unread postby nawut.com » Mon Feb 05, 2018 3:25 pm

Hello

I try to test Odroid Show2 with arduino IDE , have some problem



avrdude: stk500_getsync(): not in sync: resp=0x00




Remark :: I bought several devices.And I'm try to testing all,
I have to apologize for asking a lot of questions. Since I'm newbie.

Thank you.
Attachments
error1.png
error1.png (20.49 KiB) Viewed 533 times
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".
nawut.com
 
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
Location: Thailand
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.

Re: Show2 with arduino IDE, Sync error

Unread postby odroid » Mon Feb 05, 2018 5:36 pm

No problem.
Did you follow this guide to build/upload the firmware?
https://wiki.odroid.com/accessory/displ ... ow/setting
I think you have to check the "DTR reset jumper" on the Show2 board first.
User avatar
odroid
Site Admin
 
Posts: 27956
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Show2 with arduino IDE, Sync error

Unread postby nawut.com » Mon Feb 05, 2018 10:19 pm

odroid wrote:No problem.
Did you follow this guide to build/upload the firmware?
https://wiki.odroid.com/accessory/displ ... ow/setting
I think you have to check the "DTR reset jumper" on the Show2 board first.


Thank you for your message. I try it on windows follow the document. after I connect the jumper and upload again, The attachment is the result .
Attachments
error3.png
error3.png (49.02 KiB) Viewed 522 times
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".
nawut.com
 
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
Location: Thailand
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.

Re: Show2 with arduino IDE, Sync error

Unread postby nawut.com » Mon Feb 05, 2018 11:38 pm

Now, I try on linux follow on https://wiki.odroid.com/accessory/displ ... ow/setting.

The attachment is the result .
Attachments
Screenshot from 2018-02-05 20-40-13.png
Screenshot from 2018-02-05 20-40-13.png (419.2 KiB) Viewed 519 times
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".
nawut.com
 
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
Location: Thailand
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.

Re: Show2 with arduino IDE, Sync error

Unread postby odroid » Tue Feb 06, 2018 9:16 am

Can you find "/dev/ttyUSB0" on Ubuntu?
User avatar
odroid
Site Admin
 
Posts: 27956
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Show2 with arduino IDE, Sync error

Unread postby nawut.com » Tue Feb 06, 2018 12:19 pm

odroid wrote:Can you find "/dev/ttyUSB0" on Ubuntu?



Yes, I do command #ls /dev/tty* , it have ttyUSB0.
Odroid-C2
Odroid-HC1
Show2

Remark::I have to apologize for asking a lot of questions.
I bought several devices.And I'm try to testing all,

"Newbie for Odroid".
nawut.com
 
Posts: 12
Joined: Thu Jul 16, 2015 11:47 pm
Location: Thailand
languages_spoken: Thai
ODROIDs: Plan to develop on XU-4 and C-2, Linux OS.

Re: Show2 with arduino IDE, Sync error

Unread postby rooted » Tue Feb 06, 2018 3:21 pm

nawut.com wrote:
odroid wrote:Can you find "/dev/ttyUSB0" on Ubuntu?



Yes, I do command #ls /dev/tty* , it have ttyUSB0.
Try:

Code: Select all
sudo chmod 777 /dev/ttyUSB0


666 would work but it's just a test to see if you have write permission.

After changing permissions try flashing again without running the GUI in sudo
User avatar
rooted
 
Posts: 4908
Joined: Fri Dec 19, 2014 9:12 am
Location: Gulf of Mexico, US
languages_spoken: english
ODROIDs: C1, C1+, C2
XU3 Lite, XU4
N1
VU7+
HiFi Shield 2
Smart Power (original)


Return to SHOW

Who is online

Users browsing this forum: No registered users and 1 guest