Board Dimensions/Header Info

Moderators: mdrjr, odroid

Board Dimensions/Header Info

Unread postby taylorjtt » Sat Mar 01, 2014 1:44 am

I am designing a PCB that my ODROID U3 will plug into. I am looking for information on what type of header the expansion port is (part #) and a dimensioned drawing of the ODROID so that I can line up the mounting holes appropriately.
taylorjtt
 
Posts: 10
Joined: Tue Jan 21, 2014 12:12 pm
languages_spoken: english
ODROIDs: U3

Re: Board Dimensions/Header Info

Unread postby odroid » Sat Mar 01, 2014 9:45 am

You can refer this link for the dimension of U3-Shield board.
http://www.hardkernel.com/main/products/prdt_info.php?g_code=G138760240354&tab_idx=2
The header of 8-pin expansion ports is 2mm-pitch.
User avatar
odroid
Site Admin
 
Posts: 25312
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Board Dimensions/Header Info

Unread postby Panzerknacker » Sat Mar 01, 2014 4:43 pm

I want to build for me a steel case like this one for the BBB http://www.logicsupply.com/components/beaglebone/boards-cases-kits/bb100/.
U3 + some small pcbs + 2 RS232 + 1W (3,5mm jack).
Where can I get the dimensions/drawings of U3 that contain the exact location of all plugs?
User avatar
Panzerknacker
 
Posts: 239
Joined: Sat Feb 22, 2014 10:08 pm
languages_spoken: German, English
ODROIDs: U3, X, XU, XU3, XU4, W

Re: Board Dimensions/Header Info

Unread postby odroid » Sat Mar 01, 2014 6:13 pm

We will try to make & release a dwg file of U3 PCB with connectors in the next week.
User avatar
odroid
Site Admin
 
Posts: 25312
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Board Dimensions/Header Info

Unread postby odroid » Tue Mar 04, 2014 11:23 am

Try this DWG file of U3 PCB.
U3_MAIN_Rev0.2.zip
(634.27 KiB) Downloaded 283 times
User avatar
odroid
Site Admin
 
Posts: 25312
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Board Dimensions/Header Info

Unread postby dmarion » Mon Jun 30, 2014 10:06 pm

Can we get the same for rev0.5 board?
I would like to get exact position of the SPI connector...
dmarion
 
Posts: 1
Joined: Mon Jun 30, 2014 10:04 pm
languages_spoken: english
ODROIDs: u3

Re: Board Dimensions/Header Info

Unread postby ruppi » Tue Jul 01, 2014 11:37 am

Attached DWG file for U3 REV 0.5 PCB.
Attachments
U3_MAIN_Rev0.5_DXF.zip
(449.65 KiB) Downloaded 243 times
ruppi
 
Posts: 76
Joined: Fri Feb 22, 2013 11:13 pm
Location: South Korea
languages_spoken: korean

Re: Board Dimensions/Header Info

Unread postby sbkenn58 » Fri Apr 10, 2015 11:14 pm

This may be slightly off thread, but better, I think, than a new thread.
For me, it is a pity that the C1 doesn't have the headers on the back of the board, and be Pi compatible (camera in particular). Looking just at the weather module, it prohibits a case with the screen as the hightest component on the front. A weather module with extra inputs for remote temperature, humidity, and wind speed/direction would be great. I2C won't work at suffucuent distance to move the sensor board outside.
sbkenn58
 
Posts: 2
Joined: Fri Apr 10, 2015 11:04 pm
languages_spoken: english


Return to Hardware and peripherals

Who is online

Users browsing this forum: No registered users and 1 guest