Page 1 of 1

Board Dimensions/Header Info

Posted: Sat Mar 01, 2014 1:44 am
by taylorjtt
I am designing a PCB that my ODROID U3 will plug into. I am looking for information on what type of header the expansion port is (part #) and a dimensioned drawing of the ODROID so that I can line up the mounting holes appropriately.

Re: Board Dimensions/Header Info

Posted: Sat Mar 01, 2014 9:45 am
by odroid
You can refer this link for the dimension of U3-Shield board.
https://wiki.odroid.com/old_product/odr ... _tinkering
The header of 8-pin expansion ports is 2mm-pitch.

Re: Board Dimensions/Header Info

Posted: Sat Mar 01, 2014 4:43 pm
by Panzerknacker
I want to build for me a steel case like this one for the BBB http://www.logicsupply.com/components/b ... its/bb100/.
U3 + some small pcbs + 2 RS232 + 1W (3,5mm jack).
Where can I get the dimensions/drawings of U3 that contain the exact location of all plugs?

Re: Board Dimensions/Header Info

Posted: Sat Mar 01, 2014 6:13 pm
by odroid
We will try to make & release a dwg file of U3 PCB with connectors in the next week.

Re: Board Dimensions/Header Info

Posted: Tue Mar 04, 2014 11:23 am
by odroid
Try this DWG file of U3 PCB.
U3_MAIN_Rev0.2.zip
(634.27 KiB) Downloaded 343 times

Re: Board Dimensions/Header Info

Posted: Mon Jun 30, 2014 10:06 pm
by dmarion
Can we get the same for rev0.5 board?
I would like to get exact position of the SPI connector...

Re: Board Dimensions/Header Info

Posted: Tue Jul 01, 2014 11:37 am
by ruppi
Attached DWG file for U3 REV 0.5 PCB.

Re: Board Dimensions/Header Info

Posted: Fri Apr 10, 2015 11:14 pm
by sbkenn58
This may be slightly off thread, but better, I think, than a new thread.
For me, it is a pity that the C1 doesn't have the headers on the back of the board, and be Pi compatible (camera in particular). Looking just at the weather module, it prohibits a case with the screen as the hightest component on the front. A weather module with extra inputs for remote temperature, humidity, and wind speed/direction would be great. I2C won't work at suffucuent distance to move the sensor board outside.