Android Custom Kernel

Unread post by **mdrjr** » Tue Apr 30, 2013 1:11 am

Well, Back in time I used to do that for you guys, I'll be back doing that, but since now theres too many images and too many devices to cover.. I'll do on-demand.

For ODROID-X Options are:
Mali: 266Mhz, 440Mhz, 533Mhz
CPU: 1.4Ghz, 1.5Ghz, 1.6Ghz

For ODROID-X2 / U2 Options are:
Mali: 266Mhz, 440Mhz, 533Mhz, 640Mhz, 733Mhz, 800Mhz
CPU: 1.4Ghz, 1.5Ghz, 1.6Ghz, 1.7Ghz, 1.8Ghz, 1.9Ghz, 2.0Ghz

When requesting device driver support please keep in mind that Android also needs implementation to make it work nicely on it. So request what you'll actually use..
Requests like ... XYZ wifi devices won't be attended for the reason above (needs android RIL modifications)
Enabled Webcam (Needs android modifications).
Be realistic on what you'll ask.

Kernels will be uploaded to my server and you'll be able to browse each user request kernel for each board!

How to request.. Answer the questions below:
Board:
Boot Media:
OS Version:
Req. CPU Frequency:
Req. Mali Frequency:
Additional requests:

EXAMPLE On how to answer that:
Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.6
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 533Mhz
Additional requests: I want CD ROM enabled

I'll assign a number also to your kernel witch will be the post number of this thread so users can know what exactly that kernel have

Downloads on http://www.mdrjr.net/odroid/android/kernel

Younes R. · Unread post by **Younes R.** » Tue Apr 30, 2013 4:42 am

So nice! keep on the good work !!!
As I didn't recieve my X2 board yet (according to HK it will get shipped later this week), please excuse my ignorance.
I heard the several pins of the 50 I/O soldered on the board support ADC, so my request is:
Board: X2
Boot Media: eMMC
OS Version: Jellybean 1.6
Req. CPU Frequency: default
Req. Mali Frequency: default
Additional requests: I want driver for ultrasonic proximity sensor + myltiple USB webcam support
thanks in advance

Unread post by **mdrjr** » Tue Apr 30, 2013 4:55 am

Younes R. wrote:So nice! keep on the good work !!!
As I didn't recieve my X2 board yet (according to HK it will get shipped later this week), please excuse my ignorance.
I heard the several pins of the 50 I/O soldered on the board support ADC, so my request is:
Board: X2
Boot Media: eMMC
OS Version: Jellybean 1.6
Req. CPU Frequency: default
Req. Mali Frequency: default
Additional requests: I want driver for ultrasonic proximity sensor + myltiple USB webcam support
thanks in advance

I'll suggest you to read the first top carefully.
On USB Webcams.. It requires Android modifications as well its not just a kernel update. Enabled USB Webcams on the kernel won't simply magic make it work on Android. Android isn't friendly on hardware that you want to plug in on it.
Keep in mind that the Android design and concept was made to a device where you don't change anything connected to it.
Also on your device it doesn't have any specific driver for it, as it's very simple and a 2 pin device. Nor I own one to test, so sorry, this is not doable by myself.

sert00 · Unread post by **sert00** » Tue Apr 30, 2013 6:42 am

Board: U2
Boot Media: SD
OS Version: Jellybean 1.6
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800 mhz
Additional requests:none,but i'd be happy if at some point you can do same settings build but for EMMC (i have the 8gb) ; you know,in the case i will switch ubuntu on sd and android on Emmc

Many many thanks in advance man,you are so kind!

@all
i have a doubt about a thing i never tried yet,and want to ask.Is there anyone who know if standard android can read arduino boards attacched via usb like a normal phone?does it require additional support drivers or special implementation to being recognized from U2?
cn't try now due to the fact my uno and mega are connected and with a sketch running..and my 3rd arduino i bought today has yet to arrive

jeky82 · Unread post by **jeky82** » Tue Apr 30, 2013 8:22 pm

Hi, I received my odroid u2 yesterday and I am very happy ^_^ .

I am wandering if it was possible implement multi-step gpu frequencies like http://forum.xda-developers.com/showthr ... ?t=1927852 in perseus (or redPil) kernel for Galaxy Note 2. I am very noob, but sice the hardware of SGN2 is similar to odroid u2 the port could be simple. Then, I am also wandering if instead of compile the personal kernel with gpu/cpu overclock it was possible to modify the kernel to be compatible with sTweaks app like Perseus Kernel (and many other android kernel) to modify these parameters including voltage of cpu/gpu.

Thank you in advance for any answer (and for my English)

Younes R. · Unread post by **Younes R.** » Tue Apr 30, 2013 8:48 pm

sert00 wrote:i have a doubt about a thing i never tried yet,and want to ask.Is there anyone who know if standard android can read arduino boards attacched via usb like a normal phone?does it require additional support drivers or special implementation to being recognized from U2?
cn't try now due to the fact my uno and mega are connected and with a sketch running..and my 3rd arduino i bought today has yet to arrive

Android + Arduino ==> the mega ADK board connected to an OTG port would be the best choice for you !

Unread post by **mdrjr** » Wed May 01, 2013 3:07 am

jeky82 wrote:Hi, I received my odroid u2 yesterday and I am very happy ^_^ .

I am wandering if it was possible implement multi-step gpu frequencies like http://forum.xda-developers.com/showthr ... ?t=1927852 in perseus (or redPil) kernel for Galaxy Note 2. I am very noob, but sice the hardware of SGN2 is similar to odroid u2 the port could be simple. Then, I am also wandering if instead of compile the personal kernel with gpu/cpu overclock it was possible to modify the kernel to be compatible with sTweaks app like Perseus Kernel (and many other android kernel) to modify these parameters including voltage of cpu/gpu.

Thank you in advance for any answer (and for my English)

Hi,

We had those implemented in the past, however the Mali DVFS causes so crazy flickering while outputing to HDMI. The same flickering occours on my phone that is a SGN while using the MHL thing. That's why we have this disabled.

sert00 · Unread post by **sert00** » Wed May 01, 2013 10:06 am

Younes R. wrote:
sert00 wrote:i have a doubt about a thing i never tried yet,and want to ask.Is there anyone who know if standard android can read arduino boards attacched via usb like a normal phone?does it require additional support drivers or special implementation to being recognized from U2?
cn't try now due to the fact my uno and mega are connected and with a sketch running..and my 3rd arduino i bought today has yet to arrive
Android + Arduino ==> the mega ADK board connected to an OTG port would be the best choice for you !

not so best choice..because i can do the same with every arduino(mega 2560 better,and i own this)and an usb host shield(tht i own).So there no need to buy a mega adk!

i tried something when i bought the shield,but i have only nexus devices with jellybean and all thing are not compatibile anymore....ics is good i think

Unread post by **mdrjr** » Thu May 02, 2013 4:41 am

sert00 wrote:Board: U2
Boot Media: SD
OS Version: Jellybean 1.6
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800 mhz
Additional requests:none,but i'd be happy if at some point you can do same settings build but for EMMC (i have the 8gb) ; you know,in the case i will switch ubuntu on sd and android on Emmc

Many many thanks in advance man,you are so kind!

@all
i have a doubt about a thing i never tried yet,and want to ask.Is there anyone who know if standard android can read arduino boards attacched via usb like a normal phone?does it require additional support drivers or special implementation to being recognized from U2?
cn't try now due to the fact my uno and mega are connected and with a sketch running..and my 3rd arduino i bought today has yet to arrive

Your kernel is up on the link

sert00 · Unread post by **sert00** » Thu May 02, 2013 6:55 am

thank you very much,greatly appreciated!

Matt · Unread post by **Matt** » Thu May 02, 2013 11:01 am

If the mali frequency is set to 800 in Android, can you use some specific app to lower the speed when you don't need it that high, or are the GPU frequencies set to one number... that is, are they dynamic like the CPU freq or not)?

Unread post by **mdrjr** » Thu May 02, 2013 11:11 am

Matt wrote:If the mali frequency is set to 800 in Android, can you use some specific app to lower the speed when you don't need it that high, or are the GPU frequencies set to one number... that is, are they dynamic like the CPU freq or not)?

On ODROID we have to disable Mali DVFS because it causes flickering on HDMI. (Happens even on my phone as well. Galaxy note).
So we have to lock a frequency at a point

Sorry.

undertaker00 · Unread post by **undertaker00** » Thu May 30, 2013 3:00 am

dies this kernels work for Odroid-x ?
http://www.mdrjr.net/odroid/kernel/4.6/sdmmc/

I have android 1.6 beta , and i want a kernel for CPU and GPU OC.

Thanks.

Unread post by **mdrjr** » Thu May 30, 2013 3:32 am

undertaker00 wrote:dies this kernels work for Odroid-x ?
http://www.mdrjr.net/odroid/kernel/4.6/sdmmc/

I have android 1.6 beta , and i want a kernel for CPU and GPU OC.

Thanks.

It doesn't.

Please refer to the original post where I posted the place where the kernels will be posted.

undertaker00 · Unread post by **undertaker00** » Fri May 31, 2013 5:32 am

Board: X
Boot Media: SD
OS Version: Jellybean 1.6
Req. CPU Frequency: 1.6GHz
Req. Mali Frequency: 533Mhz
Additional requests:

Thanks!

boss1019 · Unread post by **boss1019** » Sun Jun 02, 2013 5:36 pm

Board: Odroid X2
Boot Media: SD
OS Version: Jellybean 1.5
Req. CPU Freqency: 2.0 GHz
Req. Mali Frequency: 640 mhz, or 800 mhz if you can get it to work stably.
Additional requests: Faux sound control would be cool, and greatly appreciated.
Thanks

sert00 · Unread post by **sert00** » Mon Jun 03, 2013 3:37 am

i don't think sound control of faux could do great improvements here...
anyways sorry if it's not the right topic,but can i use the previous kernel you (mdrjr)made for me for version 1.6 in new 1.7 version ?if not,can you re-compile it?
thanks

Unread post by **mdrjr** » Mon Jun 03, 2013 4:16 am

undertaker00 wrote:Board: X
Boot Media: SD
OS Version: Jellybean 1.6
Req. CPU Frequency: 1.6GHz
Req. Mali Frequency: 533Mhz
Additional requests:

Thanks!

Done and uploaded

http://www.mdrjr.net/odroid/android/kernel/x-sd/

Unread post by **mdrjr** » Mon Jun 03, 2013 4:22 am

boss1019 wrote:Board: Odroid X2
Boot Media: SD
OS Version: Jellybean 1.5
Req. CPU Freqency: 2.0 GHz
Req. Mali Frequency: 640 mhz, or 800 mhz if you can get it to work stably.
Additional requests: Faux sound control would be cool, and greatly appreciated.
Thanks

Uploaded -> http://www.mdrjr.net/odroid/android/kernel/x2-sd/
Please refer to the notes.

Unread post by **mdrjr** » Mon Jun 03, 2013 4:30 am

sert00 wrote:i don't think sound control of faux could do great improvements here...
anyways sorry if it's not the right topic,but can i use the previous kernel you (mdrjr)made for me for version 1.6 in new 1.7 version ?if not,can you re-compile it?
thanks

Nope, you can't.

I've took your old request and fitted to 1.7.

Board: U2
Boot Media: SD
OS Version: Jellybean 1.7
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800 mhz

http://www.mdrjr.net/odroid/android/kernel/u2-sd/

sert00 · Unread post by **sert00** » Mon Jun 03, 2013 4:35 am

thank you very much,you are soo fast!!!!

boss1019 · Unread post by **boss1019** » Tue Jun 04, 2013 12:39 pm

Thanks for the personalized kernel. I appreciate it a lot.
Thanks,
boss1019

albertodlh · Unread post by **albertodlh** » Tue Jun 04, 2013 10:57 pm

Hello mdrjr. Could you bake this one for me please?

Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800Mhz

Thanks!

Unread post by **mdrjr** » Tue Jun 04, 2013 11:22 pm

albertodlh wrote:Hello mdrjr. Could you bake this one for me please?

Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800Mhz

Thanks!

http://www.mdrjr.net/odroid/android/kernel/u2-emmc/

There you go

albertodlh · Unread post by **albertodlh** » Tue Jun 04, 2013 11:41 pm

Boy, that was fast! Thank you so much.

bograde · Unread post by **bograde** » Wed Jun 05, 2013 12:31 pm

Probably a dumb question here, but I have searched and can't seem to figure it out.

How do I flash the new kernel?

Board: U2
Boot Media: SD
OS Version: Jellybean 1.6
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800 mhz

I've downloaded the file, renamed, and placed in the root of the SD Fat partition. Not sure where to go from here.

I've also tried this to no avail:

6. Copying the kernel:
adb push arch/arm/boot/zImage /system/lib/modules

7. Flashing the kernel from Android itself:
adb shell
cd /system/lib/modules
busybox dd conv=notrunc seek=2455 bs=512 if=zImage of=/dev/block/mmcblk0
sync
exit
adb reboot

Thanks!

Unread post by **mdrjr** » Wed Jun 05, 2013 12:39 pm

when you run busybox dd ......

what did it said ?

sert00 · Unread post by **sert00** » Wed Jun 05, 2013 7:55 pm

yesterday i faced similar problem.
Try paste the zImage in system\lib\modules manually instead of root of fat32 partition,then go with point 7 taking care of writing exactly what mdrjr report.
after the busybox dd command you have to see something like xxx record in \ xxx record out,then sync,exit and reboot.

bograde · Unread post by **bograde** » Thu Jun 06, 2013 12:50 pm

mdrjr wrote:when you run busybox dd ......

what did it said ?

Just tried it again, after pasting zimage into /system/lib/modules and running:

adb shell
cd /system/lib/modules
busybox dd conv=notrunc seek=2455 bs=512 if=zImage of=/dev/block/mmcblk0

I get

dd: can't open 'zimage': No such file or directory

I know the file is there, I can see it on my odroid root explorer so I know it exists.

Should the file have an extension? Do I need to "build" the kernel as described in step 4?

4. Build the kernel and modules!
make -j4 ARCH=arm zImage modules

Thanks again for your help.

bograde · Unread post by **bograde** » Thu Jun 06, 2013 1:01 pm

bograde wrote:
mdrjr wrote:when you run busybox dd ......

what did it said ?
Just tried it again, after pasting zimage into /system/lib/modules and running:

adb shell
cd /system/lib/modules
busybox dd conv=notrunc seek=2455 bs=512 if=zImage of=/dev/block/mmcblk0

I get

dd: can't open 'zimage': No such file or directory

I know the file is there, I can see it on my odroid root explorer so I know it exists.

Should the file have an extension? Do I need to "build" the kernel as described in step 4?

4. Build the kernel and modules!
make -j4 ARCH=arm zImage modules

Thanks again for your help.

Just got it to work, this time I actually left the zimage in /sdcard and ran the dd busybox command. All went well and is now installed. Thanks a ton for the help! This board is awesome and the forum is a lot of help I really appreciate it.

boss1019 · Unread post by **boss1019** » Wed Jun 19, 2013 10:20 am

Board: Odroid X2
Boot Media: SD
OS Version: Jellybean 1.5
Req. CPU Freqency: 2.0 GHz
Req. Mali Frequency: 800mhz
Additional requests: Faux sound control would be cool, and greatly appreciated.
Also I realized I forgot to ask this in my previous request, but can you add support for the 7inch MCPIA 1024x600 touch module.
Info: http://mcpia.com/ Porting how to section would probabley help you.
I apologize for the second request, and inconvenience,
Boss1019

Unread post by **mdrjr** » Wed Jun 19, 2013 10:26 am

Sorry, boss, I can't do the MCPIA mod for you. I don't have one to test

I hope you understand that even when we do have hardware to test, we may skip on thing or another..
Without it will be pettry much a error shot

boss1019 · Unread post by **boss1019** » Wed Jun 19, 2013 2:51 pm

how would i add support to the current image or would I have to make a new one?
Could you maybe post your code for the kernel you made before, as I don't have much time on my hands. I'm currently developing a gamecube emulator for android, so I have very little time to work on this project

Unread post by **mdrjr** » Wed Jun 19, 2013 6:41 pm

boss1019 wrote:how would i add support to the current image or would I have to make a new one?
Could you maybe post your code for the kernel you made before, as I don't have much time on my hands. I'm currently developing a gamecube emulator for android, so I have very little time to work on this project

boss,

I use stock kernel, I just change the options to enable overclock, no source modification is done.

mikhail.timofeev · Unread post by **mikhail.timofeev** » Thu Jun 20, 2013 2:51 pm

I am looking for someone to help me
Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1 or ICS
Req. CPU Frequency: default
Req. Mali Frequency: default
Additional requests: Work 3G modem, USB Web Cam (UVC) and OpenCV library
thanks in advance

Unread post by **mdrjr** » Thu Jun 20, 2013 9:18 pm

mikhail.timofeev wrote:I am looking for someone to help me
Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1 or ICS
Req. CPU Frequency: default
Req. Mali Frequency: default
Additional requests: Work 3G modem, USB Web Cam (UVC) and OpenCV library
thanks in advance

Mikhail,
I will ask you to read my OP, already answer you request.
What you are requesting isn't just a kernel update its way more complex.
3G on Android relays on top of the Android RIL and requires a implementation for that. Its not a kernel update.
Kernel wise speaking its a 10minutes job.. But If I enable the USB 3G modem and you plug your modem..
Nothing will happen. Android doesn't work like your regular Linux that will handle anything that you throw at it

You have to code it on the Android Sources, on the 3G case the RIL framework.
There's a RIL for Android called hauwei to support those modems.
Its not a promise but I'll look onto hauwei ril and see if one day I can implement that.

USB Cameras, should be working as far as I know on 1.7.1.

OpenCV is up to your project we have several poeple already doing that.

deivid · Unread post by **deivid** » Fri Jun 21, 2013 4:53 am

mdrjr wrote:
mikhail.timofeev wrote:I am looking for someone to help me
Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1 or ICS
Req. CPU Frequency: default
Req. Mali Frequency: default
Additional requests: Work 3G modem, USB Web Cam (UVC) and OpenCV library
thanks in advance
Mikhail,
I will ask you to read my OP, already answer you request.
What you are requesting isn't just a kernel update its way more complex.
3G on Android relays on top of the Android RIL and requires a implementation for that. Its not a kernel update.
Kernel wise speaking its a 10minutes job.. But If I enable the USB 3G modem and you plug your modem..
Nothing will happen. Android doesn't work like your regular Linux that will handle anything that you throw at it
You have to code it on the Android Sources, on the 3G case the RIL framework.
There's a RIL for Android called hauwei to support those modems.
Its not a promise but I'll look onto hauwei ril and see if one day I can implement that.

USB Cameras, should be working as far as I know on 1.7.1.

OpenCV is up to your project we have several poeple already doing that.

I know this is off-topic, but consider adding existing implementations of wifi chipsets to the source, such as the ones implemented by allwinner.. I'm not sure how hard it'll be but considering it's already done, merging shouldn't be too time consuming (consder: i don't have idea what I'm talking about)

Unread post by **mdrjr** » Fri Jun 21, 2013 4:57 am

One difference from ODROID's to Allwinners/Rockchips.. Is that you can download our sources for Android.. point be their sources..

turboblade · Unread post by **turboblade** » Fri Jun 21, 2013 7:27 am

Would be useful to be able to remap left and right mouse buttons. I that a simple kernal mod

Sent from my HTC One X using Tapatalk 2

Unread post by **mdrjr** » Fri Jun 21, 2013 7:33 am

turboblade wrote:Would be useful to be able to remap left and right mouse buttons. I that a simple kernal mod

Sent from my HTC One X using Tapatalk 2

This is done on Android sources.. not on the kernel.

christof · Unread post by **christof** » Fri Jun 21, 2013 8:28 pm

I like to get a working Apple Magic Mouse.

https://github.com/entrope/linux-magicmouse

Gesendet von meinem ODROID-X2 mit Tapatalk 2

Unread post by **mdrjr** » Fri Jun 21, 2013 9:32 pm

I'll take a look onto that... Nice idea

turboblade · Unread post by **turboblade** » Sat Jun 22, 2013 6:26 am

mdrjr wrote:
turboblade wrote:Would be useful to be able to remap left and right mouse buttons. I that a simple kernal mod

Sent from my HTC One X using Tapatalk 2
This is done on Android sources.. not on the kernel.

How exactly?

Sent from my HTC One X using Tapatalk 2

mikhail.timofeev · Unread post by **mikhail.timofeev** » Tue Jun 25, 2013 9:34 pm

mdrjr wrote: USB Cameras, should be working as far as I know on 1.7.1.

OpenCV is up to your project we have several poeple already doing that.

It is possible on to tell in more detail as it to make on version 1.7.1 for OpenCV, and whether it is possible to write video with WebCam

Unread post by **mdrjr** » Tue Jun 25, 2013 9:38 pm

Please, don't offtopic this thread. Its for KERNEL REQUESTS. Nothing else.
Create your own thread please.

sert00 · Unread post by **sert00** » Tue Jul 02, 2013 3:20 pm

Hi mdrjr!Care to rebuild my request for kernel (like in second post)for 1.7.4 version?
it's stopped at 1.7.1 and flashing it on 1.7.4 (robroyhall)or 1.7.6 test (codewalker)give strange artifact,recovery wasnot there anymore,etc etc.
Codewalker has changed something,added init.d support etc.Now i'm with 1.7.4 rob version anyway.
thank you very much

Unread post by **mdrjr** » Tue Jul 02, 2013 6:41 pm

I will! As soon as its a official release

sert00 · Unread post by **sert00** » Tue Jul 02, 2013 7:38 pm

ok,thanks bro!
take yours time!

LostInIgnorance · Unread post by **LostInIgnorance** » Tue Jul 09, 2013 3:47 am

Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800Mhz
Additional requests: None

Unread post by **mdrjr** » Tue Jul 09, 2013 4:05 am

LostInIgnorance wrote:Board: U2
Boot Media: eMMC
OS Version: Jellybean 1.7.1
Req. CPU Frequency: 2.0Ghz
Req. Mali Frequency: 800Mhz
Additional requests: None

Why don't you search first before ask

this is already done.. on this thread

http://www.mdrjr.net/odroid/android/ker ... odlh-notes