Re-flash eMMC after removing partitions

Moderators: meveric, mdrjr, odroid

Re-flash eMMC after removing partitions

Unread postby sp789 » Wed Dec 06, 2017 9:20 pm

Hello,

I have Odroid C2 + eMMC 32GB. Originally, Android was on the eMMC.
Then, using "LibreELEC USB-SD Creator", I re-flashed on "LibreELEC".

Now I'm trying to re-flash back on Android, but I can not do it.

From indiscretion I removed all partitions (via AOMEI Partition Assistent), and I do not know what to do with it now.

I tried to format the eMMC to FAT32 and then flash the image
"selfinstall-odroidc2-eng-s905_6.0.1_master-85-v3.5.img.xz" and "daily-odroidc2-eng-s905_6.0.1_master-85-v3.5 .tar.gz"
via Etcher and Win32DiskImager-odroid-v1.3, but unsuccessfully.

Is it possible simply to flash the Android image even with partitions and boot?

If that's not the case, would you please write some precise steps on how to do it?

I am a Windows user, and I have no experience with Linux.

Thank you in advance for all the answers.

Excuse me for my very bad English.
sp789
 
Posts: 2
Joined: Wed Dec 06, 2017 8:18 pm
languages_spoken: english (very bad), czech, slovak
ODROIDs: Odroid C2

Re: Re-flash eMMC after removing partitions

Unread postby odroid » Wed Dec 06, 2017 9:48 pm

Format your eMMC with SDformatter.
https://www.sdcard.org/downloads/formatter_4/index.html
And flash "selfinall-*" image with Etcher.

BTW, did you have no issue while flashing the OS image with Etcher?
Validation passed?
User avatar
odroid
Site Admin
 
Posts: 25317
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English
ODROIDs: ODROID

Re: Re-flash eMMC after removing partitions

Unread postby sp789 » Wed Dec 06, 2017 10:50 pm

Before flashing, I added a partition and formatted it to FAT32.

Either before flashing wrote:
"I looks like this is not a bootable image. The image does not appear to contain a partition table, and might not be recognized or bootable by your device."

After Flashing:
Print "Flash Complete."
The validation did not make any mistake.

eMMC does not boot in ODROID C2.
When I look at eMMC over AOMEI Partition assistant, it is unformatted. Only one partition.



..and now
SD formatter does not start after installation.
Tonight I try on another PC.
sp789
 
Posts: 2
Joined: Wed Dec 06, 2017 8:18 pm
languages_spoken: english (very bad), czech, slovak
ODROIDs: Odroid C2


Return to General Chat

Who is online

Users browsing this forum: No registered users and 1 guest