UART cable advice

Post Reply
excusable
Posts: 3
Joined: Thu Mar 28, 2024 10:44 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

UART cable advice

Post by excusable »

I'm trying to source a UART cable to read the serial output during boot of the M1S.
I am not knowledgable in that area yet, so my question basically is: will this thing work?

https://www.amazon.co.uk/AZDelivery-UAR ... 08T24NML9/

I know I can source one from the odroid shop, but shipping a single adapter from Korea to Britain seems excessive, if that all right :D

User avatar
joerg
Posts: 2058
Joined: Tue Apr 01, 2014 2:14 am
languages_spoken: german, english, español
ODROIDs: C1, C1+, C2, N1, N2, C4
Location: Germany
Has thanked: 212 times
Been thanked: 475 times
Contact:

Re: UART cable advice

Post by joerg »

Yes, this one you can use. You let the jumper at 3.3v for using with M1S. Rx and Tx you must connect over cross to M1S . Rx of adapter to Tx of M1S a.s.o. And I found, it works better with many adapters, if you only connect GND, Rx and Tx and not 3.3V.

excusable
Posts: 3
Joined: Thu Mar 28, 2024 10:44 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: UART cable advice

Post by excusable »

Great, thanks for the advice.

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 1 guest