Maximum output current for connector J2

Post Reply
jorini
Posts: 2
Joined: Fri Jan 31, 2020 9:44 pm
languages_spoken: english
ODROIDs: ODROID-C2 and C4
Has thanked: 0
Been thanked: 0
Contact:

Maximum output current for connector J2

Post by jorini »

I am integrating the Odroid C4 electronics, and I want to use the power outputs available on the J2 expansion connector, to power external electronics.

I want to know the maximum current capacity of the outputs: 5V (pins 2 and 4), and 3V3 (pins 1 and 17), located in the J2 connector.

User avatar
odroid
Site Admin
Posts: 36930
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 1595 times
Been thanked: 1072 times
Contact:

Re: Maximum output current for connector J2

Post by odroid »

I think you can source up to 1.5Amp from the 5.0V power rail, if you don't use any USB device.
3.3V power rail seems to have a similar capability.

Check the C4 schematics page 4.
https://wiki.odroid.com/odroid-c4/hardw ... _datasheet

Post Reply

Return to “Hardware and peripherals”

Who is online

Users browsing this forum: No registered users and 2 guests