[OS] Debian Buster (for ODROID Go Advance)

Third party OS images and hardware mods
krisvek
Posts: 14
Joined: Mon Feb 17, 2020 3:10 am
languages_spoken: english
ODROIDs: Odroid-GO, Odroid-Go Advance
Has thanked: 7 times
Been thanked: 4 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by krisvek » Tue Feb 18, 2020 10:02 am

meveric wrote:
Tue Feb 18, 2020 9:26 am
Since redream is closed source and you have to pay for it to use it it's hard to say anything about it.
I bet the RPi version is only running on RPi and no where else, and is pretty much useless otherwise.
Also you still probably need to pay to be able to use it.
You don't need to pay at all to use redream. It's not open-source anymore, but it doesn't cost anything to download and use.
A license can be bought to enable a few more features, mostly higher resolution (which won't be too in demand for a device like the GO2!).

The drastic binary wasn't intended to run on the GO2, right? But it does. So maybe redream can too :D
Regardless, I've put a bug in the developer's ear about it. He's not focusing on more platforms right now, but if it's easy enough, it might be doable.

Maybe related, I seem to run into libdsl2 troubles when I try to install rvgl. I saw in your earlier vid that you had it installed?

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Tue Feb 18, 2020 4:05 pm

krisvek wrote:
Tue Feb 18, 2020 10:02 am
The drastic binary wasn't intended to run on the GO2, right? But it does. So maybe redream can too :D
Drastic has a "pure" SDL2 version that only uses SDL2 and GLESv2 to run on that way it works on all systems.
Previously there was a version that was only working on the RPi and used the bchost drivers which are unique to RPi and do not exist on any other device.
Therefor it did not run on any other device.
krisvek wrote:
Tue Feb 18, 2020 10:02 am
Maybe related, I seem to run into libdsl2 troubles when I try to install rvgl. I saw in your earlier vid that you had it installed?
Yes RVGL works fine installed and ran it multiple times already. Make sure you have the SDL2 version installed from my repository.
Also the ini file of RVGL should have Profile = 2 and Shaders = 1 which is the combination of GLESv2
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

krisvek
Posts: 14
Joined: Mon Feb 17, 2020 3:10 am
languages_spoken: english
ODROIDs: Odroid-GO, Odroid-Go Advance
Has thanked: 7 times
Been thanked: 4 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by krisvek » Wed Feb 19, 2020 11:49 pm

FYI I am able to run redream on the Go2 now. Helped the dev troubleshoot things, I believe it turned out to be a bug with SDL.
Still have to deal with screen rotation issues, though here on Buster that can be handled by X i think, right? (judging by how drastic, etc. can be rotated without source access).
These users thanked the author krisvek for the post:
dmckean44 (Thu Feb 20, 2020 9:25 am)

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Wed Feb 19, 2020 11:53 pm

X11 rotates the display automatically no need to adjust any software.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

krisvek
Posts: 14
Joined: Mon Feb 17, 2020 3:10 am
languages_spoken: english
ODROIDs: Odroid-GO, Odroid-Go Advance
Has thanked: 7 times
Been thanked: 4 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by krisvek » Thu Feb 20, 2020 3:15 am

Yes, sorry, I specifically meant rotation issues elsewhere, not in this Buster image.

sana2dang
Posts: 4
Joined: Tue Oct 08, 2019 9:54 am
languages_spoken: korea
ODROIDs: odroid advance go, odroid n2
Has thanked: 1 time
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by sana2dang » Thu Feb 20, 2020 3:35 pm

krisvek wrote:
Tue Feb 18, 2020 7:16 am
I was able to run the Nintendo DS emulator drastic!
Only played Mario Kart DS, but it ran really well with standard settings (no upscaling 3D).
Image
The normal output is amazing!!

here can I get a working drastic file?
I beg you.

bastetfurry
Posts: 2
Joined: Sat Feb 29, 2020 12:18 am
languages_spoken: English German
ODROIDs: Odroid Go, Odroid Go Advance
Has thanked: 1 time
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by bastetfurry » Sat Feb 29, 2020 12:25 am

I have a little problem with the installation of dev packages, especially libsdl1.2-dev and libsdl2-dev, all i get is this:

Code: Select all

bastetfurry@KatzenOdroid:~$ sudo apt install libsdl2-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 libsdl2-dev : Hängt ab von: libgl1-mesa-dev soll aber nicht installiert werden
               Hängt ab von: libglu1-mesa-dev soll aber nicht installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
bastetfurry@KatzenOdroid:~$ sudo apt install libgl1-mesa-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 libgl1-mesa-dev : Hängt ab von: mesa-common-dev (= 18.3.6-2+deb10u1)
                   Hängt ab von: libdrm-dev (>= 2.4.95) soll aber nicht installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
bastetfurry@KatzenOdroid:~$ sudo apt install libdrm-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 libdrm-dev : Hängt ab von: libdrm2 (= 2.4.97-1) aber 2.4.97-1+odroid1 soll installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
bastetfurry@KatzenOdroid:~$ sudo apt install libdrm2
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
libdrm2 ist schon die neueste Version (2.4.97-1+odroid1).
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  libdrm-common libmng1 libqt4-network libqt4-xml libqtcore4 libqtdbus4 libqtgui4 qtcore4-l10n
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 3 nicht aktualisiert.
(Sorry, my install is in German.)

What now?
I suspect that libdrm2=2.4.97-1+odroid1 and libdrm2=2.4.97-1 are the same from the outside, what now? How do i tell apt that those two are more or less the same for the purpose of installing libdrm-dev and the others?

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Sat Feb 29, 2020 8:53 am

bastetfurry wrote:
Sat Feb 29, 2020 12:25 am
I have a little problem with the installation of dev packages, especially libsdl1.2-dev and libsdl2-dev, all i get is this:

Code: Select all

bastetfurry@KatzenOdroid:~$ sudo apt install libsdl2-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 libsdl2-dev : Hängt ab von: libgl1-mesa-dev soll aber nicht installiert werden
               Hängt ab von: libglu1-mesa-dev soll aber nicht installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
bastetfurry@KatzenOdroid:~$ sudo apt install libgl1-mesa-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 libgl1-mesa-dev : Hängt ab von: mesa-common-dev (= 18.3.6-2+deb10u1)
                   Hängt ab von: libdrm-dev (>= 2.4.95) soll aber nicht installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
bastetfurry@KatzenOdroid:~$ sudo apt install libdrm-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:

Die folgenden Pakete haben unerfüllte Abhängigkeiten:
 libdrm-dev : Hängt ab von: libdrm2 (= 2.4.97-1) aber 2.4.97-1+odroid1 soll installiert werden
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
bastetfurry@KatzenOdroid:~$ sudo apt install libdrm2
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
libdrm2 ist schon die neueste Version (2.4.97-1+odroid1).
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  libdrm-common libmng1 libqt4-network libqt4-xml libqtcore4 libqtdbus4 libqtgui4 qtcore4-l10n
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 3 nicht aktualisiert.
(Sorry, my install is in German.)
Don't worry I'm German as well, so it doesn't bother me ;)
bastetfurry wrote:
Sat Feb 29, 2020 12:25 am
What now?
I suspect that libdrm2=2.4.97-1+odroid1 and libdrm2=2.4.97-1 are the same from the outside, what now? How do i tell apt that those two are more or less the same for the purpose of installing libdrm-dev and the others?
libdrm2=2.4.97-1+odroid1 is mainly for libdrm-rockchip it's probably similar, but I wouldn't bet it's identical.
But it seems the only part "really" missing is libdrm-dev, which luckily is in my repository.

Code: Select all

apt install -t buster libdrm-dev
in fact using apt install -t buster libsdl1.2-dev could also work, as it might be able to automatically pull the dependencies.
basically my "buster-backports" repository has a lower priority that the main Debian repository.
So it seems libdrm-dev from Debian Buster which is version 2.4.97-1 and wants to install libdrm2 in the same version.. but we already have libdrm2 in version 2.4.97-1+odroid1 installed, that is why it's having hiccups.
Installing the correct version of libdrm-dev should solve all other issues. :)
These users thanked the author meveric for the post:
bastetfurry (Sat Feb 29, 2020 4:34 pm)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

bastetfurry
Posts: 2
Joined: Sat Feb 29, 2020 12:18 am
languages_spoken: English German
ODROIDs: Odroid Go, Odroid Go Advance
Has thanked: 1 time
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by bastetfurry » Sat Feb 29, 2020 4:35 pm

Thanks, that solved it. :D

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Wed Mar 18, 2020 4:25 am

Just a reminder to see if you can split out librga into armhf, arm64 and -dev packages, that would make thing a bit cleaner for my environments. Also when you get a chance please also confirm if package sources are available and if you confirm librga was compiled in release mode (need to edit the makefile). Thanks a lot!

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Wed Mar 18, 2020 5:52 am

I used the sources directly from Rockchip code was not modified.
But I think you're correct that the library might have been compiled in debug mode, therefore I will probably exchange them when I create the -dev package.

Edit:
Turns out the problem was you have to build packages with a specific option that allows you to install multiarch packages side by side rather than replacing them.
But I also build -dev package anyway.
viewtopic.php?p=286273#p286273
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Wed Mar 18, 2020 7:15 am

Thanks I confirm both install side-by-side. And you recompiled them in Release?

EDIT: I see this message: Changed to release build and configured for multi-arch installation support.

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Wed Mar 18, 2020 7:39 am

Are these libretro core builds based on the official deb packages or did you compile them yourself or assemble them from various sources?

Code: Select all

ii  libretro-81                               20200119-1+deb10                              arm64        Libretro 81 core to use with retroarch (ODROID build)
ii  libretro-atari800                         20200119-1+deb10                              arm64        Libretro atari800 core to use with retroarch (ODROID build)
ii  libretro-bluemsx                          20200119-1+deb10                              arm64        Libretro bluemsx core to use with retroarch (ODROID build)
ii  libretro-cap32                            20200119-1+deb10                              arm64        Libretro cap32 core to use with retroarch (ODROID build)
ii  libretro-fbalpha2012-cps1                 20200119-1+deb10                              arm64        Libretro fbalpha2012-cps1 core to use with retroarch (ODROID build)
ii  libretro-fbalpha2012-cps2                 20200119-1+deb10                              arm64        Libretro fbalpha2012-cps2 core to use with retroarch (ODROID build)

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Wed Mar 18, 2020 7:45 am

I compiled them myself and packaged them for my needs. They will be placed to /usr/local/share/retroarch/cores/ and that's rather unique to my images.
Build from libretro github sources.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Wed Mar 18, 2020 8:27 am

I think the same has to be done for libgo2 (armhf doesn't appear to exist).

Also, are you able to add the following udev rules by default or do you consider this out of scope for this image:

Code: Select all

KERNEL=="rga", GROUP="video", MODE="0660"
ACTION=="add", SUBSYSTEM=="backlight", RUN+="/bin/chgrp video /sys/class/backlight/%k/brightness"
ACTION=="add", SUBSYSTEM=="backlight", RUN+="/bin/chmod g+w /sys/class/backlight/%k/brightness"

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Wed Mar 18, 2020 9:05 am

Yes libgo2 I haven't touched in a while as I don't have any use for it it's not used in any of my software, so I haven't done much with it.
But I can see if I can repack it for arm64 and armhf again.
I'll check on the udev rule, I can push an update via setup-odroid package that way I could deploy this udev rule.
But at some point you probably will hit the next wall with GPU drivers or whatever.
I don't really investigate a lot at the moment in GBM support, as X11 is a lot easier to handle, especially if you want to use it for emulation.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Wed Mar 18, 2020 9:24 am

Thanks, I think this should be mostly it for me.
But at some point you probably will hit the next wall with GPU drivers or whatever.
What do you mean by this? It looks like mali gbm drivers are there already?

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Wed Mar 18, 2020 9:30 am

there are different versions.. let hope what is available is enough for you.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

mameise
Posts: 173
Joined: Sat Jul 07, 2018 6:40 am
languages_spoken: english german
ODROIDs: ODROID-GO
Has thanked: 13 times
Been thanked: 26 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by mameise » Thu Mar 19, 2020 6:19 pm

Hi meveric,

is UART1 enabled in your Image? How can i enable it? I already got some hints from mad_ady but i am still unable to get it working :(

Thanks

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Thu Mar 19, 2020 6:34 pm

Not sure what you mean by UART1.
If you plug in the UART Cable from HardKernel in the UART port on the right side of the ODROID Go Advance it should work.
I used this multiple times already for debugging.

If UART1 is something different then I don't know if it works or not or what needs to be done to make it work.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

snock
Posts: 47
Joined: Sat Feb 29, 2020 6:56 pm
languages_spoken: spanish
ODROIDs: Odroid-Go Advance
Location: Murcia [Spain]
Has thanked: 17 times
Been thanked: 5 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by snock » Thu Mar 19, 2020 6:47 pm

I did not know of its existence in rpi ... even so try redream in android and pc .. and for my taste the version that we have works better. The gui is horrible. I was looking at your work, can it be used on the go? Or is the architecture of the other odroid different?

I have adapted the buttons to my liking in the n64 emulators. Does the mupen64plus.ini or InputAutoCfg.ini file exist in the n64 emulator? To adapt the buttons to my liking?

I use archlinux regularly and I'm not afraid to start compiling and I understand programming a bit, although I have abandoned it: (...
I am going to install the minimum graphical environment, there are many apps, interesting games that only work from there.

We are going to quarantine as best we can ...

mameise
Posts: 173
Joined: Sat Jul 07, 2018 6:40 am
languages_spoken: english german
ODROIDs: ODROID-GO
Has thanked: 13 times
Been thanked: 26 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by mameise » Thu Mar 19, 2020 7:17 pm

meveric wrote:
Thu Mar 19, 2020 6:34 pm
Not sure what you mean by UART1.
If you plug in the UART Cable from HardKernel in the UART port on the right side of the ODROID Go Advance it should work.
I used this multiple times already for debugging.

If UART1 is something different then I don't know if it works or not or what needs to be done to make it work.
I mean the 10pin connector on top. There is also RX and TX available as Uart1. The right one seems to be UART2. Is the top connector enabled?

Thanks

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Thu Mar 19, 2020 7:18 pm

snock wrote:
Thu Mar 19, 2020 6:47 pm
I have adapted the buttons to my liking in the n64 emulators. Does the mupen64plus.ini or InputAutoCfg.ini file exist in the n64 emulator? To adapt the buttons to my liking?
InputAutoCfg.ini with config for ODROID Go Advance (how I configured it) is part of the standalone emulator. Ini file is not part of the emulator and has to be configured manually if you want to start with a "blank" installation
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Thu Mar 19, 2020 7:21 pm

mameise wrote:
Thu Mar 19, 2020 7:17 pm
I mean the 10pin connector on top. There is also RX and TX available as Uart1. The right one seems to be UART2. Is the top connector enabled?
Thanks
I have not actively "disabled" it, but never did anything with it either.
If it's not enabled by default through the Kernel, then I have not done anything to make it work.
If there has to be done something up front the actively "enable" it, then no I haven't done that. If it's suppose to work, with the default settings of Kernel from HardKernel, then yes it should work.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Fri Mar 20, 2020 1:15 am

@meveric can you confirm the SDL2 libs with rotation are included? I tried with your vanilla image but it doesn't seem to be rotated.

SDL2 rotation: viewtopic.php?f=194&t=38045

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Fri Mar 20, 2020 2:10 am

No I do not include this library.
I use X11 as a surface which in return turns every single application on it.
No need to use libgo2 or SDL2 with rotation.
Therefore I don't use them at all.
I was working on libgo2 and will upload that soon, but I will not test it as I have no software that uses/needs it.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

valadaa48
Posts: 84
Joined: Mon Feb 17, 2020 1:35 pm
languages_spoken: english
ODROIDs: odroid go advance
Has thanked: 3 times
Been thanked: 9 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by valadaa48 » Fri Mar 20, 2020 3:57 am

can you tell me the process you use to build debs? i can try to package it to submit.

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Fri Mar 20, 2020 5:37 am

valadaa48 wrote:
Fri Mar 20, 2020 3:57 am
can you tell me the process you use to build debs? i can try to package it to submit.
That depends on the package. SDL2 for example I use the packages provided by Debian and simply rebuild them with different parameters or patches if needed.
Other packages I write my own installer and use checkinstall or other dpkg funktions to create packages.

But I can't accept packages that will break support of other applications or boards.
The repository is shared with other boards as well, and not everyone uses a display that is build in the wrong way.
Imagine the output on the TV would be turned 270°C that's not desirable.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

JimGoose
Posts: 6
Joined: Sun Feb 23, 2020 3:53 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by JimGoose » Fri Mar 20, 2020 9:46 am

How do I get the desktop on the debian buster image? I have been trying forever and nothing seems to work.

flowen8
Posts: 24
Joined: Wed Sep 11, 2019 8:02 am
languages_spoken: english
ODROIDs: odroid go Odroid go Advance
Has thanked: 2 times
Been thanked: 6 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by flowen8 » Fri Mar 20, 2020 10:24 am

JimGoose wrote:
Fri Mar 20, 2020 9:46 am
How do I get the desktop on the debian buster image? I have been trying forever and nothing seems to work.
Run setup-odroid.

Tremont
Posts: 5
Joined: Sat Feb 15, 2020 9:12 am
languages_spoken: English
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by Tremont » Sun Apr 19, 2020 5:05 am

I bought a USB hub so I could use a keyboard and wifi, but I haven't been able to get it working. When I plug in the USB hub, it seems to work fine until I plug in the keyboard. It gives me some kind of error that just keeps repeating:

Code: Select all

[ 125.968555] usb 1-1.3: reset low-speed USB device number 10 using dwc2
The keyboard works if I am not using the USB hub. I can't think of anything to get it working.

User avatar
npaladin2000
Posts: 104
Joined: Sun Jan 05, 2020 1:39 pm
languages_spoken: english
ODROIDs: Odroid Go Advance 1.0, 1.1
Has thanked: 20 times
Been thanked: 20 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by npaladin2000 » Sun Apr 19, 2020 6:59 am

Tremont wrote:
Sun Apr 19, 2020 5:05 am
I bought a USB hub so I could use a keyboard and wifi, but I haven't been able to get it working. When I plug in the USB hub, it seems to work fine until I plug in the keyboard. It gives me some kind of error that just keeps repeating:

Code: Select all

[ 125.968555] usb 1-1.3: reset low-speed USB device number 10 using dwc2
The keyboard works if I am not using the USB hub. I can't think of anything to get it working.
Is it a powered or unpowered hub?

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Sun Apr 19, 2020 8:40 am

I'm using an un-powered USB "hub" and I have WIFI, LAN and wireless mouse/keyboard on it.. everything works fine.
So generally this should work. Especially since you said, keyboard works when you plug them in directly, this suggest the issue could be the hub itself.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Tremont
Posts: 5
Joined: Sat Feb 15, 2020 9:12 am
languages_spoken: English
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by Tremont » Sun Apr 19, 2020 9:28 am

meveric wrote:
Sun Apr 19, 2020 8:40 am
I'm using an un-powered USB "hub" and I have WIFI, LAN and wireless mouse/keyboard on it.. everything works fine.
So generally this should work. Especially since you said, keyboard works when you plug them in directly, this suggest the issue could be the hub itself.
It is un-powerd. The mouse and wifi both work with the hub. I have tried multiple different keyboards, but none of them worked with it. So I think there's something wrong with the hub, but it works fine with my Ubuntu computer.

User avatar
mad_ady
Posts: 7900
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
Location: Bucharest, Romania
Has thanked: 499 times
Been thanked: 348 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by mad_ady » Sun Apr 19, 2020 2:31 pm

My unpowered Sun Keyboard, that has a 3 port hub works as a keyboard when plugged in, but shows the same error when plugging in a wifi/ethernet module.
So it depends on the power requirements of the hub/devices.

User avatar
npaladin2000
Posts: 104
Joined: Sun Jan 05, 2020 1:39 pm
languages_spoken: english
ODROIDs: Odroid Go Advance 1.0, 1.1
Has thanked: 20 times
Been thanked: 20 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by npaladin2000 » Sun Apr 19, 2020 9:35 pm

Tremont wrote:
Sun Apr 19, 2020 9:28 am
meveric wrote:
Sun Apr 19, 2020 8:40 am
I'm using an un-powered USB "hub" and I have WIFI, LAN and wireless mouse/keyboard on it.. everything works fine.
So generally this should work. Especially since you said, keyboard works when you plug them in directly, this suggest the issue could be the hub itself.
It is un-powerd. The mouse and wifi both work with the hub. I have tried multiple different keyboards, but none of them worked with it. So I think there's something wrong with the hub, but it works fine with my Ubuntu computer.
Maybe your particular keyboard just draws too much power for an unpowered hub? Try a powered one just to make sure.

Tremont
Posts: 5
Joined: Sat Feb 15, 2020 9:12 am
languages_spoken: English
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by Tremont » Mon Apr 20, 2020 10:21 am

My monitor has a built in powered USB hub. It works fine with that with that, so I guess all of my keyboards just need too much power.

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Mon Apr 20, 2020 3:53 pm

Tremont wrote:
Mon Apr 20, 2020 10:21 am
My monitor has a built in powered USB hub. It works fine with that with that, so I guess all of my keyboards just need too much power.
It's probably not the keyboard that draws too much power. More likely it's the WiFi adapter.
If you unplug WiFi and use mouse and keyboard alone I'd guess they work.
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Tremont
Posts: 5
Joined: Sat Feb 15, 2020 9:12 am
languages_spoken: English
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by Tremont » Mon Apr 20, 2020 10:26 pm

meveric wrote:
Mon Apr 20, 2020 3:53 pm
Tremont wrote:
Mon Apr 20, 2020 10:21 am
My monitor has a built in powered USB hub. It works fine with that with that, so I guess all of my keyboards just need too much power.
It's probably not the keyboard that draws too much power. More likely it's the WiFi adapter.
If you unplug WiFi and use mouse and keyboard alone I'd guess they work.
If the only thing I have plugged in is the keyboard, it still doesn't work. So I don't think the WiFi is a problem.

pgamer
Posts: 5
Joined: Sun May 03, 2020 4:10 am
languages_spoken: english
ODROIDs: Odroid Go Advanced
Has thanked: 1 time
Been thanked: 2 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by pgamer » Sun May 24, 2020 8:48 am

Hey everyone, is it possible someone can share the minimum steps required to get dosbox working on this OS? I get a Segfault after installing dosbox using apt-get. I assume their is special steps required for the underlying SDL requirements or some similar dependency to be configured correctly for this to work.

Thanks in advance.


Sent from my iPhone using Tapatalk

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Sun May 24, 2020 6:13 pm

install image on sd card
use setup-odroid to install a Desktop Environment (I suggest MATE Desktop)
install dosbox

you probably need to scale to get the dosbox window on the screen
xrandr --output DSI-1 --scale 1.5x1.5 should be enough.
These users thanked the author meveric for the post:
pgamer (Sun May 24, 2020 11:27 pm)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

ptrm
Posts: 14
Joined: Sun Feb 16, 2020 7:56 pm
languages_spoken: english, polish
ODROIDs: Go, Go Advance
Has thanked: 3 times
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by ptrm » Thu May 28, 2020 7:55 pm

If anyone stumbled upon sudo missing and initrd generation error during recent dist-upgrades (uboot package kicked in), I managed to get it working by installing sudo manually through apt and then running update-initramfs manually, and then reinstalling broken packages.

Code: Select all

apt remove linux-image-arm64-odroid-go2 linux-image-4.4.189
apt install sudo
apt install linux-image-arm64-odroid-go2 linux-image-4.4.189 --install-suggests --install-recommends
# error thrown
update-initramfs -u -k 4.4.189
apt install -f
I'm not sure if --install-suggests/recommends are necessary at all, though I haven't tested without it. What I tested was that rebooting with failed linux-image upgrade resulted in being unable to boot again, and then upgrading cleanly installed image resulted in same troubles upgrading. So that's a bug report as well ;)
Last edited by ptrm on Thu May 28, 2020 7:56 pm, edited 1 time in total.

ptrm
Posts: 14
Joined: Sun Feb 16, 2020 7:56 pm
languages_spoken: english, polish
ODROIDs: Go, Go Advance
Has thanked: 3 times
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by ptrm » Thu May 28, 2020 7:55 pm

Btw, is there a quick way to turn screen on/off from the console? Before recent upgrades I had the screen turned off automatically after 5-10 minutes and was unable to turn it on, now it stays always on.

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Thu May 28, 2020 7:58 pm

ptrm wrote:
Thu May 28, 2020 7:55 pm
If anyone stumbled upon sudo missing and initrd generation error during recent dist-upgrades (uboot package kicked in), I managed to get it working by installing sudo manually through apt and then running update-initramfs manually, and then reinstalling broken packages.

Code: Select all

apt remove linux-image-arm64-odroid-go2 linux-image-4.4.189
apt install sudo
apt install linux-image-arm64-odroid-go2 linux-image-4.4.189 --install-suggests --install-recommends
# error thrown
update-initramfs -u -k 4.4.189
apt install -f
I'm not sure if --install-suggests/recommends are necessary at all, though I haven't tested without it. What I tested was that rebooting with failed linux-image upgrade resulted in being unable to boot again, and then upgrading cleanly installed image resulted in same troubles upgrading. So that's a bug report as well ;)
Thanks for letting me know, there were quite a lot of changes lately on Kernel and OS and I haven't tested fully on Debian Buster yet, as I was focusing on the gaming image.
Although I don't know why you need sudo, I have to check on that, as sudo should not be required for this.
ptrm wrote:
Thu May 28, 2020 7:55 pm
Btw, is there a quick way to turn screen on/off from the console? Before recent upgrades I had the screen turned off automatically after 5-10 minutes and was unable to turn it on, now it stays always on.
On of the changes is in the boot.ini where it now has "consoleblank=0" this is responsible for not turning off console via a timeout.
you could for example simply set the screen brightness to 0

Code: Select all

echo "0" > /sys/devices/platform/backlight/backlight/backlight/brightness
max value is 255.
These users thanked the author meveric for the post:
ptrm (Thu May 28, 2020 8:04 pm)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

ptrm
Posts: 14
Joined: Sun Feb 16, 2020 7:56 pm
languages_spoken: english, polish
ODROIDs: Go, Go Advance
Has thanked: 3 times
Been thanked: 0
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by ptrm » Thu May 28, 2020 8:00 pm

meveric wrote:
Thu May 28, 2020 7:58 pm
Thanks for letting me know, there were quite a lot of changes lately on Kernel and OS and I haven't tested fully on Debian Buster yet, as I was focusing on the gaming image.
Although I don't know why you need sudo, I have to check on that, as sudo should not be required for this.
Sudo was used in a postinst script of the kernel. There were error messages of it missing, though I'm not sure if the install would succeed without it.

User avatar
meveric
Posts: 11006
Joined: Mon Feb 25, 2013 2:41 pm
languages_spoken: german, english
ODROIDs: X2, U2, U3, XU-Lite, XU3, XU3-Lite, C1, XU4, C2, C1+, XU4Q, HC1, N1, Go, H2 (N4100), N2, H2 (J4105), GoA, C4
Has thanked: 37 times
Been thanked: 338 times
Contact:

Re: [OS] Debian Buster (for ODROID Go Advance)

Post by meveric » Thu May 28, 2020 8:04 pm

ptrm wrote:
Thu May 28, 2020 8:00 pm
Sudo was used in a postinst script of the kernel. There were error messages of it missing, though I'm not sure if the install would succeed without it.
hm as I said, sudo should not be required, as you run the update as root anyway, so why would it need sudo for that?
Therefore I have to check where it says sudo, as it does not belong there.

Edit:
ok, that happens if you copy packages from other people.
The uboot package has "sudo dd" as a command.
Makes absolutely no sense, I'll fix this and upload a new package do that this doesn't happen again.
Thanks for pointing this out :)
Donate to support my work on the ODROID GameStation Turbo Image for U2/U3 XU3/XU4 X2 X C1 as well as many other releases.
Check out the Games and Emulators section to find some of my work or check the files in my repository to find the software i build for ODROIDs.
If you want to add my repository to your image read my HOWTO integrate my repo into your image.

Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 2 guests