Emuelec for the Odroid Go Advance June update!

Third party OS images and hardware mods
dermann
Posts: 2
Joined: Sat Apr 18, 2020 9:09 pm
languages_spoken: english
ODROIDs: GO Advance
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by dermann » Sat Apr 25, 2020 8:15 pm

IgaBiva wrote:
Fri Apr 24, 2020 6:29 pm
dermann wrote:
Mon Apr 20, 2020 8:26 pm
Hi all,

I'm having trouble getting the Neo Geo games to run. I've downloaded a bios set and put it into the correct place (bios folder in the roms directory). For some of the games (EmuELEC shows the correct games list), the game will load and show just a black screen whereas others will simply return to the game list.
This is your issue - for all arcade romsets (mame, fbneo etc) bios files must go in a same folder where roms are located, not in separate bios folder. In another words, put neogeo.zip in folder where your games are
Thanks guys. The fix was a mixture of the two responses. First the bios wasn't very comprehensive (missing files) and secondly putting the bios file into the neogeo roms folder made it work.

FormulaFox
Posts: 24
Joined: Tue Feb 18, 2020 7:50 am
languages_spoken: english
ODROIDs: Go Advance
Has thanked: 0
Been thanked: 4 times
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by FormulaFox » Sun Apr 26, 2020 9:03 am

Been using Batocera for a bit but I wanted to come back and check this out again. Flashed a new SD card, got it running, but...Can't figure out what hostname I should be using to access the device through WinSCP. Can't find it listed anywhere, either. This is my preferred way to load ROMs at this point.

drpsicoloco
Posts: 25
Joined: Tue Mar 17, 2020 8:48 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by drpsicoloco » Sun Apr 26, 2020 2:56 pm

anyone know where to put mame samples?

Also, has anyone had luck running killer instinct 1 and 2? I've tried many versions of mame. Lates was mame 2003 plus (chds were in their folder too)

User avatar
npaladin2000
Posts: 110
Joined: Sun Jan 05, 2020 1:39 pm
languages_spoken: english
ODROIDs: Odroid Go Advance 1.0, 1.1
Has thanked: 21 times
Been thanked: 25 times
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by npaladin2000 » Sun Apr 26, 2020 8:36 pm

FormulaFox wrote:
Sun Apr 26, 2020 9:03 am
Been using Batocera for a bit but I wanted to come back and check this out again. Flashed a new SD card, got it running, but...Can't figure out what hostname I should be using to access the device through WinSCP. Can't find it listed anywhere, either. This is my preferred way to load ROMs at this point.
I think the NetBIOS name is "EmuELEC" but frankly you'll have better luck just using the IP address, that's what I do.

FormulaFox
Posts: 24
Joined: Tue Feb 18, 2020 7:50 am
languages_spoken: english
ODROIDs: Go Advance
Has thanked: 0
Been thanked: 4 times
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by FormulaFox » Mon Apr 27, 2020 3:42 am

npaladin2000 wrote:
Sun Apr 26, 2020 8:36 pm
FormulaFox wrote:
Sun Apr 26, 2020 9:03 am
Been using Batocera for a bit but I wanted to come back and check this out again. Flashed a new SD card, got it running, but...Can't figure out what hostname I should be using to access the device through WinSCP. Can't find it listed anywhere, either. This is my preferred way to load ROMs at this point.
I think the NetBIOS name is "EmuELEC" but frankly you'll have better luck just using the IP address, that's what I do.
I've done both of those. EmuELEC gets an error saying the host doesn't exist, using the IP address causes a timeout.

Edit: I've tried every capitalization variation of EmuELEC as well - emuelec, Emuelec, EmuElec, emuElec, eMuelec, you get the idea...

User avatar
npaladin2000
Posts: 110
Joined: Sun Jan 05, 2020 1:39 pm
languages_spoken: english
ODROIDs: Odroid Go Advance 1.0, 1.1
Has thanked: 21 times
Been thanked: 25 times
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by npaladin2000 » Mon Apr 27, 2020 9:41 am

FormulaFox wrote:
Mon Apr 27, 2020 3:42 am
npaladin2000 wrote:
Sun Apr 26, 2020 8:36 pm
FormulaFox wrote:
Sun Apr 26, 2020 9:03 am
Been using Batocera for a bit but I wanted to come back and check this out again. Flashed a new SD card, got it running, but...Can't figure out what hostname I should be using to access the device through WinSCP. Can't find it listed anywhere, either. This is my preferred way to load ROMs at this point.
I think the NetBIOS name is "EmuELEC" but frankly you'll have better luck just using the IP address, that's what I do.
I've done both of those. EmuELEC gets an error saying the host doesn't exist, using the IP address causes a timeout.

Edit: I've tried every capitalization variation of EmuELEC as well - emuelec, Emuelec, EmuElec, emuElec, eMuelec, you get the idea...
And none of that matters, the real problem is that using the IP address causes a timeout. If that happens it wouldn't be reachable by hostname either anyway, so stick with using the IP. Sounds like your device hasn't connected to the network properly.

mclout99
Posts: 57
Joined: Sun Mar 03, 2013 3:42 pm
languages_spoken: english
ODROIDs: X & X2
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance March 08 update!

Post by mclout99 » Tue Apr 28, 2020 11:23 pm

bmwaudiomw wrote:
Thu Mar 26, 2020 10:54 pm
Iamno1 wrote:
Thu Mar 26, 2020 10:18 pm
Shumafuk wrote:
Thu Mar 26, 2020 9:41 pm
Is there any BIOS pack (all in one) for Emuelec?
PM sent. ;)
can you PM me too? thx!
PM, please. Thanks.

drpsicoloco
Posts: 25
Joined: Tue Mar 17, 2020 8:48 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by drpsicoloco » Wed Apr 29, 2020 12:25 pm

Can anyone point me to information on remapping buttons per system?


I have fbneo and negeo in a separate folder. I was able to map my controls on my arcade stick so street fighter is mapped properly but I'd love to remap the buttons so that my buttons are correct for neogeo (only along the top button row).

I found this regarding remapping in retroarch https://github.com/retropie/retropie-se ... -remapping

Is this what I should do? Is there an easier way to only remap buttons for the NeoGeo system within emuelec?

pgamer
Posts: 5
Joined: Sun May 03, 2020 4:10 am
languages_spoken: english
ODROIDs: Odroid Go Advanced
Has thanked: 1 time
Been thanked: 3 times
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by pgamer » Sun May 03, 2020 5:18 am

I have spent a lot of time testing and tweaking dosbox games on Emuelec. I thought I'd share my findings on the forum. If you aren't interested in dos games then you can completely neglect this post.

You have two options for dos emulation dosbox SDL2 and dosbox_libretro. I only use dosbox libretro for mouse driven games like dune2 and warcraft (RTS games). For everything else I use the SDL2 emulator as it has the best performance and the best button mapping and joystick emulation. That said, I just haven't been able to get it to work for mouse emulation on dosbox SDL2.

One of the key benefits of dosbox SDL2 version is it works well with .conf files which you can tweak heavily for performance and also have reference a unique mapper file for the button mappings. It is nice to have a dedicated mapper for each game. One of the big benefits of the mapper file is that you can have button combinations on the odroid that map to individual key strokes which means you can emulate large numbers of keystrokes by using the left and right triggers as function keys for example. Dosbox refers to them as mod keys.

In order to do that though you need to have Emuelec understand that .conf files are what start the games. To do that you need to modify following files:

/storage/.config/emuelec/scripts/emuelecRunEmu.sh
(Line 176) RUNTHIS='${TBASH} /usr/bin/dosbox.start -conf "${ROMNAME}"'
(This means it will assume the file you use is a configuration file and not an .exe when running dosbox)

/storage/.config/emulationstation/es_systems.cfg
(Line 751) <system>
(Line 752) <name>pc</name>
(Line 753) <fullname>DOS x86</fullname>
(Line 754) <path>/storage/roms/pc</path>
(Line 755) <extension>.conf</extension>
(Line 756) <command>/usr/bin/emuelecRunEmu.sh %ROM% -P%SYSTEM% --controllers="%CONTROLLERSCONFIG%"</command>
(Line 757) <platform>pc</platform>
(Line 758) <theme>pc</theme>
(Line 759) </system>
(This means that emulationstation looks for .conf files in your /storage/roms/pc/ directory and not the game executables, which I happen to store in a different folder /storage/roms/dos/

Hope that all makes sense so far.

From there you just need to make a .conf file for each game that includes a reference to a mapper file. Here is an example I have of the contents of the mapper file:

key_esc "stick_0 button 11" (ii)
key_r "key 21" "stick_0 button 5" (right shoulder)
key_y "key 28" "stick_0 button 3" (y)
key_enter "stick_0 button 10" (i)
key_a "key 4" "stick_0 button 1" (a)
key_l "key 15" "stick_0 button 4" (left shoulder)
key_x "key 27" "stick_0 button 2" (x)
key_b "key 5" "stick_0 button 0" (b)
key_space "key 44" "stick_0 button 12" (iii)
key_up "key 82" "stick_0 button 6" (up)
key_left "key 80" "stick_0 button 8" (left)
key_down "key 81" "stick_0 button 7" (down)
key_right "key 79" "stick_0 button 9" (right)
jaxis_0_1- "stick_0 axis 1 0" (joystick directions mapped to joy on odroid)
jaxis_0_1+ "stick_0 axis 1 1" (joystick directions mapped to joy on odroid)
jaxis_0_0- "stick_0 axis 0 0" (joystick directions mapped to joy on odroid)
jaxis_0_0+ "stick_0 axis 0 1" (joystick directions mapped to joy on odroid)

Here is the full list of the buttons on the odroid that you need for the mapper file:

"stick_0 button 8" (left)
"stick_0 button 9" (right)
"stick_0 button 7" (down)
"stick_0 button 6" (up)
"stick_0 button 0" (b)
"stick_0 button 1" (a)
"stick_0 button 2" (x)
"stick_0 button 3" (y)
"stick_0 button 10" (i)
"stick_0 button 11" (ii)
"stick_0 button 12" (iii)
"stick_0 button 13" (iv)
"stick_0 button 14" (v)
"stick_0 button 15" (vi)
"stick_0 axis 1 0" (joy stick)
"stick_0 axis 1 1" (joy stick)
"stick_0 axis 0 0" (joy stick)
"stick_0 axis 0 1" (joy stick)

I'm happy to share my conf files and mapper files for various games. There is a whole lot of tweaks for cpu, graphics and audio that I have done depending on how demanding the game is (e.g. 2 scroller versus 3rd games).

Here is a sample conf and mapper file I am using for X-Wing:

X-Wing.conf https://drive.google.com/file/d/1fW-_RU ... sp=sharing
xwing.map https://drive.google.com/file/d/1rWwsTq ... sp=sharing

Here is a link to a video I created showing some dos games in action: https://www.youtube.com/watch?v=_d3rlJxwlb8

Hope this is helpful. I'm interested in knowing what other dos gamers are doing to make this stuff work.
These users thanked the author pgamer for the post (total 2):
iball (Sun May 03, 2020 8:16 am) • alektronic (Sat May 09, 2020 12:26 am)

cllobera
Posts: 2
Joined: Sun May 03, 2020 9:47 pm
languages_spoken: english
Has thanked: 2 times
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by cllobera » Sun May 03, 2020 10:10 pm

-

I´m loving Emuelec 3.5 !!!!!! working great !!!!!!

I´m testing gameplay in Sega Dreamcast games, and next i will try N64 and Atomiswave/naomi

Some working great and some other not !!! Still trying

you can check the videos with Sega Dreamcast games tests I upload in youtube here: https://www.youtube.com/channel/UCj8eBQ ... QVJBGh2Qkw

I you want me to try any game, please let me know and I´ll try to make and upload the video !!!!

Thanks!!

Zombie Revenge:
https://youtu.be/LeJEjQS6g5w

Dynamite Cop:
https://youtu.be/7MCGFB_ZcNY


-
These users thanked the author cllobera for the post:
shanti (Mon May 04, 2020 8:18 am)

nadol
Posts: 1
Joined: Wed May 06, 2020 7:08 am
languages_spoken: polish, english
Has thanked: 0
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance March 08 update!

Post by nadol » Wed May 06, 2020 7:16 am

CISKO wrote:
Thu Mar 26, 2020 11:38 pm
Iamno1 wrote:
Thu Mar 26, 2020 11:26 pm
Did someone try to change the splash screens ?
Changing them in the Storage folder does not work.
It is read from /usr/config/splash but the file is read only...
I changed it.
it is very easy , by SSH and the commands mount -o remount and cp
Could You please explain it more deeply how to do it? I would like to change splash but /usr folder is mounted as read only.

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by shanti » Wed May 13, 2020 7:56 am

There is a new test version which includes among other fixes, a sleep mode (thanks to KiwiHop).
Power button will now be a sleep mode and HK+power will be fully shutdown (you can also shutdown from the menu)

As all tests, it is highly recommended to use a clean install, but if you insist on upgrading remember to run "Reset emuelec scripts and binaries to default" from the danger zone menu in EmuELEC settings.

there has been some reports of random black screens, but I cannot reproduce them, so if this happens to you and have a way to reproduce it, please let me know!

Download here, https://emuelec.dpi.mx/files/?dir=OdroidGoAdvance
These users thanked the author shanti for the post (total 2):
adventureFAN (Wed May 13, 2020 6:08 pm) • psk (Wed May 13, 2020 9:38 pm)

User avatar
adventureFAN
Posts: 65
Joined: Sun Feb 23, 2020 4:22 am
languages_spoken: english, german
ODROIDs: OGA & OGA V1.1 (preorder)
Has thanked: 6 times
Been thanked: 18 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by adventureFAN » Wed May 13, 2020 5:36 pm

Workaround for the random black screens:
on the EMUELEC partition, go into /extlinux/extlinux.conf and add consoleblank=0 after ssh

(Quote from shanti in discord)
These users thanked the author adventureFAN for the post:
odroid (Wed May 13, 2020 5:45 pm)

zombiekutez
Posts: 6
Joined: Thu Apr 30, 2020 4:37 pm
languages_spoken: english
ODROIDs: Odroid Go Advanved
Has thanked: 0
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance April 1st update!

Post by zombiekutez » Thu May 14, 2020 1:59 am

shanti wrote:
Wed May 13, 2020 7:56 am
There is a new test version which includes among other fixes, a sleep mode (thanks to KiwiHop).
Power button will now be a sleep mode and HK+power will be fully shutdown (you can also shutdown from the menu)

As all tests, it is highly recommended to use a clean install, but if you insist on upgrading remember to run "Reset emuelec scripts and binaries to default" from the danger zone menu in EmuELEC settings.

there has been some reports of random black screens, but I cannot reproduce them, so if this happens to you and have a way to reproduce it, please let me know!

Download here, https://emuelec.dpi.mx/files/?dir=OdroidGoAdvance
So about the analog stick scale zone have been fix yes, sensitivity analog stick is verry small in sdl port like psp, i have push maximum analog stick but it report low range, i cant fix it in libretro, set analog sensitivity 2.0. Another thing, do you can update ppssppsdl2, it have better performent

spoony100
Posts: 2
Joined: Wed Mar 11, 2020 7:26 pm
languages_spoken: english
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by spoony100 » Thu May 14, 2020 2:42 am

Great news on the sleep function on the May update, very useful.

I have noticed a small issue with PSP where it can not access the memory card and the 'allow ppsspp access' button doesn't work.

Tested on both an upgrade from the April update and a clean installation.

Otherwise great work on the awesome build!

Franck313
Posts: 18
Joined: Sun Mar 22, 2020 4:54 am
languages_spoken: english
ODROIDs: Odroid Go Advance
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Franck313 » Mon May 18, 2020 1:00 am

Hi,

For some time, PS1 emulations slows... Some freeze... in game and during the cinematics...

Do you have some tips ?

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by shanti » Tue May 19, 2020 9:45 am

I just received the updated OGA (Thanks to HK!) with the extra buttons, I got EmuELEC running on it, but it has some minor bugs I need to figure out (hangs after returning from sleep), other than that, the black case is beautiful! really makes the OGA look so much better!
These users thanked the author shanti for the post:
odroid (Tue May 19, 2020 9:47 am)

miller1587
Posts: 1
Joined: Tue May 19, 2020 5:09 am
languages_spoken: english
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by miller1587 » Wed May 20, 2020 3:11 am

shanti wrote:
Tue May 19, 2020 9:45 am
I just received the updated OGA (Thanks to HK!) with the extra buttons, I got EmuELEC running on it, but it has some minor bugs I need to figure out (hangs after returning from sleep), other than that, the black case is beautiful! really makes the OGA look so much better!
Hi Shanti, can you post your impressions of the updated OGA?

User avatar
rooted
Posts: 7642
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 680 times
Been thanked: 183 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by rooted » Wed May 20, 2020 4:10 am

It's the same really, just don't need a wireless dongle hanging out taking up the USB port and the two additional buttons.

I will say I like the updated packaging, they made specific packaging for the Odroid Go Advance which is really nice to see and should alleviate any broken buttons in shipping.
These users thanked the author rooted for the post:
miller1587 (Wed May 20, 2020 5:04 am)

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by shanti » Wed May 20, 2020 4:31 am

miller1587 wrote:
Wed May 20, 2020 3:11 am
shanti wrote:
Tue May 19, 2020 9:45 am
I just received the updated OGA (Thanks to HK!) with the extra buttons, I got EmuELEC running on it, but it has some minor bugs I need to figure out (hangs after returning from sleep), other than that, the black case is beautiful! really makes the OGA look so much better!
Hi Shanti, can you post your impressions of the updated OGA?
rooted wrote:
Wed May 20, 2020 4:10 am
It's the same really, just don't need a wireless dongle hanging out taking up the USB port and the two additional buttons.

I will say I like the updated packaging, they made specific packaging for the Odroid Go Advance which is really nice to see and should alleviate any broken buttons in shipping.
Exactly what @rooted said, plus I really like the black case, for me it looks so much better (but I never did liked transparent electronics) and the case for me was easier to fit in, didn't felt like I was forcing it.
These users thanked the author shanti for the post:
miller1587 (Wed May 20, 2020 5:04 am)

User avatar
0xDNYZEPTGMKBb
Posts: 10
Joined: Mon Jan 27, 2020 1:08 pm
languages_spoken: 中文,english,한국어
ODROIDs: Odroid Go Advance 1.0, 1.1
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by 0xDNYZEPTGMKBb » Wed May 20, 2020 10:23 am

Nice!~~~~

ASpooky
Posts: 26
Joined: Tue Feb 24, 2015 7:56 pm
languages_spoken: english
Has thanked: 0
Been thanked: 2 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by ASpooky » Sat May 23, 2020 8:13 am

Is there a changelog for the may update,?

Also, is there a download for the tar update?
These users thanked the author ASpooky for the post:
Nikojiro (Wed Jun 03, 2020 8:03 pm)

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by shanti » Sat May 23, 2020 9:40 am

Just FYI. Fixes for OGA v1.1 are ready to go :) had to do some dirty hacks to get the gamepad working on both revisions but wanted to fix it before the revision ships. WiFi and sleep are working perfectly fine, and the gamepads are both mapped almost the same (except for L2 and R2) but more info will be coming once I do the proper release.
These users thanked the author shanti for the post (total 3):
cdu13a (Sat May 23, 2020 12:18 pm) • odroid (Mon May 25, 2020 9:40 am) • ducadan (Tue May 26, 2020 1:32 am)

madelk
Posts: 3
Joined: Tue Feb 18, 2020 1:59 pm
languages_spoken: english
ODROIDs: Odroid go
Odroid go adv
Has thanked: 0
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by madelk » Mon May 25, 2020 1:16 am

Hey guys, I've tried my best to search for answers here but couldn't find any applologies if this has been asked before and I missed it.
I have a couple of just minor issues.
1, When scraping it often doesn't find my game, but if I go to "input", change nothing an just select search, my game is at the top of the list.
2, The quick load of pressing 1+LB doesn't do anything, but save, reset, fps counter, ra menu, fforward, save slot, exit and volume work fine. How do I fix this and how does something like that even break on a fresh image if others don't have the issue?

Eyeball37
Posts: 160
Joined: Sat Feb 15, 2020 12:58 am
languages_spoken: english
ODROIDs: Go Advance
Has thanked: 16 times
Been thanked: 7 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Eyeball37 » Mon May 25, 2020 9:01 pm

Just ordered the black edition, gonna give the 1st gen to my 6 year old with a custom kid friendly emuelec 👍👍

Grocerybag
Posts: 36
Joined: Mon Feb 03, 2020 11:02 am
languages_spoken: english
Has thanked: 3 times
Been thanked: 8 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Grocerybag » Tue May 26, 2020 2:13 am

shanti wrote:
Sat May 23, 2020 9:40 am
Just FYI. Fixes for OGA v1.1 are ready to go :) had to do some dirty hacks to get the gamepad working on both revisions but wanted to fix it before the revision ships. WiFi and sleep are working perfectly fine, and the gamepads are both mapped almost the same (except for L2 and R2) but more info will be coming once I do the proper release.
Great to hear, thank you Shanti for your hard work. Will we be able to update our older images to support the new OGA 1.1, or will we need to start over from a fresh install?

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by shanti » Tue May 26, 2020 3:52 am

Grocerybag wrote:
Tue May 26, 2020 2:13 am
shanti wrote:
Sat May 23, 2020 9:40 am
Just FYI. Fixes for OGA v1.1 are ready to go :) had to do some dirty hacks to get the gamepad working on both revisions but wanted to fix it before the revision ships. WiFi and sleep are working perfectly fine, and the gamepads are both mapped almost the same (except for L2 and R2) but more info will be coming once I do the proper release.
Great to hear, thank you Shanti for your hard work. Will we be able to update our older images to support the new OGA 1.1, or will we need to start over from a fresh install?
You will be able to upgrade as they will be interchangeable with one another, just maybe a small fix will be needed (I'm still not sure about that)

Josezno
Posts: 5
Joined: Sun Mar 15, 2020 3:28 pm
languages_spoken: english, spanish
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Josezno » Wed May 27, 2020 3:15 am

Where's the full .tar for 3.6?

There's only a few bytes file here (.sha256):

https://emuelec.dpi.mx/files/?dir=OdroidGoAdvance

Ganjadorno
Posts: 9
Joined: Fri May 22, 2020 10:33 pm
languages_spoken: english
ODROIDs: Odroid Go and soon to come Odroid Go advance BE
Has thanked: 8 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Ganjadorno » Wed May 27, 2020 9:02 pm

@shanti are there any plans to incorporate the changes made to retroroller and retro arena in terms of Arch? Seems like emulation performance can be boosted by that better kernel etc.

3ndm3
Posts: 11
Joined: Wed May 27, 2020 11:59 am
languages_spoken: English
Has thanked: 1 time
Been thanked: 2 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by 3ndm3 » Fri May 29, 2020 9:03 pm

i really like this images but my problem is, how can I hide ._ files on GBA?. its redundant when everything got 2 files.

Josezno
Posts: 5
Joined: Sun Mar 15, 2020 3:28 pm
languages_spoken: english, spanish
ODROIDs: Odroid Go Advance
Has thanked: 0
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Josezno » Fri May 29, 2020 10:00 pm

3ndm3 wrote:
Fri May 29, 2020 9:03 pm
i really like this images but my problem is, how can I hide ._ files on GBA?. its redundant when everything got 2 files.
That's probably because you're using a Mac, right?

There's a software called blue harvest that removes those Mac files. You can do it via terminal too. Just google it.

About that 3.6 update file, anyone knows why isn't available yet?

3ndm3
Posts: 11
Joined: Wed May 27, 2020 11:59 am
languages_spoken: English
Has thanked: 1 time
Been thanked: 2 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by 3ndm3 » Sat May 30, 2020 12:17 am

Josezno wrote:
Fri May 29, 2020 10:00 pm
3ndm3 wrote:
Fri May 29, 2020 9:03 pm
i really like this images but my problem is, how can I hide ._ files on GBA?. its redundant when everything got 2 files.
That's probably because you're using a Mac, right?

There's a software called blue harvest that removes those Mac files. You can do it via terminal too. Just google it.

About that 3.6 update file, anyone knows why isn't available yet?
yup, i'm on mac, alright, i will see to it about that. thank you

Franck313
Posts: 18
Joined: Sun Mar 22, 2020 4:54 am
languages_spoken: english
ODROIDs: Odroid Go Advance
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Franck313 » Sat May 30, 2020 5:19 am

Hi everyone !

How can i move the 2 screen on drastic ? How switch the 2 screen ? one next the other ?

User avatar
davidrx
Posts: 8
Joined: Sat May 30, 2020 5:53 am
languages_spoken: english
ODROIDs: Odroid Go Advance [Rev 1.1 AKA Black Edition] [Preorder]
Location: California, US
Has thanked: 7 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by davidrx » Sat May 30, 2020 5:57 am

Excited for 3.6 of EmuElec to be released, i have used EmuElec in the past and loved it.
I hope you have a good day/night!

User avatar
adventureFAN
Posts: 65
Joined: Sun Feb 23, 2020 4:22 am
languages_spoken: english, german
ODROIDs: OGA & OGA V1.1 (preorder)
Has thanked: 6 times
Been thanked: 18 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by adventureFAN » Sat May 30, 2020 6:12 pm

Oh yes! In my eyes it has the best usability <3

knight2087
Posts: 5
Joined: Sat May 30, 2020 6:34 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by knight2087 » Sat May 30, 2020 6:52 pm

hello guys

my RPI just die so i plan to buy an OGA, but first to make my decision i wanted to know one little thing.

Can someone tell me if in the PSX emulator, in the setting of retroarch there is the option to modify "PSX CPU clock" ? it should be in advanced setting (default value 57)

i am not sure if this setting is related to the OS used (emuelec, lakka, ...) , or the core used, from what i know its available in pcsx-rearmed standalone only, but i am a noob to know the difference.

thanks

User avatar
adventureFAN
Posts: 65
Joined: Sun Feb 23, 2020 4:22 am
languages_spoken: english, german
ODROIDs: OGA & OGA V1.1 (preorder)
Has thanked: 6 times
Been thanked: 18 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by adventureFAN » Sat May 30, 2020 9:55 pm

Yes the "PSX CPU clock" setting is there. This is a core-option.
These users thanked the author adventureFAN for the post (total 2):
knight2087 (Sun May 31, 2020 12:09 am) • davidrx (Sun May 31, 2020 9:44 am)

knight2087
Posts: 5
Joined: Sat May 30, 2020 6:34 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by knight2087 » Sun May 31, 2020 3:28 pm

Hi

Sound great, hope i would be able to play game like Parasite Eve 2 that need specific setting.

Currently OGA is out of stock, just need to wait.

knight2087
Posts: 5
Joined: Sat May 30, 2020 6:34 pm
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by knight2087 » Tue Jun 02, 2020 12:29 am

hello

if every hotkey can be remapped to SELECT its ok i guess.

Is it possible btw ?

User avatar
davidrx
Posts: 8
Joined: Sat May 30, 2020 5:53 am
languages_spoken: english
ODROIDs: Odroid Go Advance [Rev 1.1 AKA Black Edition] [Preorder]
Location: California, US
Has thanked: 7 times
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by davidrx » Tue Jun 02, 2020 1:07 am

I think it is, ive done it once before with emuelec.
I hope you have a good day/night!

crashoverride
Posts: 4969
Joined: Tue Dec 30, 2014 8:42 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 291 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by crashoverride » Tue Jun 02, 2020 7:43 am

Please keep in mind this forum is not the appropriate place to discuss support issue with clone hardware. A forum moderator may delete any such posts without notice.
These users thanked the author crashoverride for the post:
shanti (Thu Jun 04, 2020 1:29 am)

zachlindblad
Posts: 5
Joined: Sat Sep 21, 2019 1:19 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by zachlindblad » Wed Jun 03, 2020 7:40 am

Has anyone else had any issues with the OGA 1.1 internal wifi in emuelec?
I'm on the latest build (3.6 05172020), if I go to the network menu in emuelec and enable wifi, enter in my SSID and password, on exiting the menu I get a popup about "wifi enabled" but when I return to the menu my network status is "NOT CONNECTED".
Scanning in the SSID menu doesn't show any results (but not sure if that's just as intended for now).
If I go to wifi under retroarch, it just shows a blank submenu.
Unfortunately I'm on windows, so I don't have an easy way to pull logs from the device (without a network connection). Is it possibly my device is borked or is anyone else having this problem?

Eyeball37
Posts: 160
Joined: Sat Feb 15, 2020 12:58 am
languages_spoken: english
ODROIDs: Go Advance
Has thanked: 16 times
Been thanked: 7 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Eyeball37 » Wed Jun 03, 2020 7:56 am

zachlindblad wrote:
Wed Jun 03, 2020 7:40 am
Has anyone else had any issues with the OGA 1.1 internal wifi in emuelec?
I'm on the latest build (3.6 05172020), if I go to the network menu in emuelec and enable wifi, enter in my SSID and password, on exiting the menu I get a popup about "wifi enabled" but when I return to the menu my network status is "NOT CONNECTED".
Scanning in the SSID menu doesn't show any results (but not sure if that's just as intended for now).
If I go to wifi under retroarch, it just shows a blank submenu.
Unfortunately I'm on windows, so I don't have an easy way to pull logs from the device (without a network connection). Is it possibly my device is borked or is anyone else having this problem?
Could be either a fault with the console or a bug within 3.6. Try the stock image to rule out hardware

jonathan_g
Posts: 9
Joined: Tue May 26, 2020 9:56 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by jonathan_g » Wed Jun 03, 2020 8:44 am

zachlindblad wrote:
Wed Jun 03, 2020 7:40 am
Has anyone else had any issues with the OGA 1.1 internal wifi in emuelec?
I'm on the latest build (3.6 05172020), if I go to the network menu in emuelec and enable wifi, enter in my SSID and password, on exiting the menu I get a popup about "wifi enabled" but when I return to the menu my network status is "NOT CONNECTED".
Scanning in the SSID menu doesn't show any results (but not sure if that's just as intended for now).
If I go to wifi under retroarch, it just shows a blank submenu.
Unfortunately I'm on windows, so I don't have an easy way to pull logs from the device (without a network connection). Is it possibly my device is borked or is anyone else having this problem?
I have the same issue with mine too using 3.6 Once I plug in my wifi dongle it will find my network no problem.
These users thanked the author jonathan_g for the post:
zachlindblad (Wed Jun 03, 2020 1:02 pm)

zachlindblad
Posts: 5
Joined: Sat Sep 21, 2019 1:19 am
languages_spoken: english
Has thanked: 1 time
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by zachlindblad » Wed Jun 03, 2020 1:30 pm

jonathan_g wrote:
Wed Jun 03, 2020 8:44 am
zachlindblad wrote:
Wed Jun 03, 2020 7:40 am
Has anyone else had any issues with the OGA 1.1 internal wifi in emuelec?
I'm on the latest build (3.6 05172020), if I go to the network menu in emuelec and enable wifi, enter in my SSID and password, on exiting the menu I get a popup about "wifi enabled" but when I return to the menu my network status is "NOT CONNECTED".
Scanning in the SSID menu doesn't show any results (but not sure if that's just as intended for now).
If I go to wifi under retroarch, it just shows a blank submenu.
Unfortunately I'm on windows, so I don't have an easy way to pull logs from the device (without a network connection). Is it possibly my device is borked or is anyone else having this problem?
I have the same issue with mine too using 3.6 Once I plug in my wifi dongle it will find my network no problem.
Ah yeah it must be something with 3.6, just flashed the newest batocera and the wifi worked no prob

zombiekutez
Posts: 6
Joined: Thu Apr 30, 2020 4:37 pm
languages_spoken: english
ODROIDs: Odroid Go Advanved
Has thanked: 0
Been thanked: 0
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by zombiekutez » Wed Jun 03, 2020 9:03 pm

Hey everyone. Do you know how to add new core manual for retroarch, new n64 paraLLEI coming up, it look like maybe can get n64 fullspeed on OGA, i can't wait for this anymore.

jonathan_g
Posts: 9
Joined: Tue May 26, 2020 9:56 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by jonathan_g » Wed Jun 03, 2020 9:35 pm

zachlindblad wrote:
Wed Jun 03, 2020 1:30 pm
jonathan_g wrote:
Wed Jun 03, 2020 8:44 am
zachlindblad wrote:
Wed Jun 03, 2020 7:40 am
Has anyone else had any issues with the OGA 1.1 internal wifi in emuelec?
I'm on the latest build (3.6 05172020), if I go to the network menu in emuelec and enable wifi, enter in my SSID and password, on exiting the menu I get a popup about "wifi enabled" but when I return to the menu my network status is "NOT CONNECTED".
Scanning in the SSID menu doesn't show any results (but not sure if that's just as intended for now).
If I go to wifi under retroarch, it just shows a blank submenu.
Unfortunately I'm on windows, so I don't have an easy way to pull logs from the device (without a network connection). Is it possibly my device is borked or is anyone else having this problem?
I have the same issue with mine too using 3.6 Once I plug in my wifi dongle it will find my network no problem.
Ah yeah it must be something with 3.6, just flashed the newest batocera and the wifi worked no prob
I think so too. I flashed it too and it seemed to work just fine for me.

Nikojiro
Posts: 16
Joined: Thu Feb 20, 2020 7:46 pm
languages_spoken: english, french
ODROIDs: Odroid Go Advance
Has thanked: 4 times
Been thanked: 6 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by Nikojiro » Thu Jun 04, 2020 1:25 am

Can we get a tar update package for 3.6 please?

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by shanti » Thu Jun 04, 2020 1:43 am

crashoverride wrote:
Tue Jun 02, 2020 7:43 am
Please keep in mind this forum is not the appropriate place to discuss support issue with clone hardware. A forum moderator may delete any such posts without notice.
I agree with @crashoverride and I just want to add just so everyone is aware, I never (nor would I ever, as legally I cannot anyways) gave any authorization to include EmuELEC as default on any HW, original, clone or otherwise. Please do not talk (or ask for support) about any other device that is not the OGA (or other HK products) on this thread.

As for the updated FW, I plan on having a test maybe as soon as today, just trying to figure out some last minute details, I am testing the FW right now and will update here as soon as I am done with the testing.

The test available right now has not been updated to the latest Kernel, so the WiFi module and the game-pad have not been updated.

A small issue I am facing is how to properly upgrade, some minor manual tweaking is going to be needed to update from v1.0 to v1.1 if you want to use the same SD card, if you do a clean install, which is what I would recommend anyways, you should have no issues.
These users thanked the author shanti for the post (total 4):
davidrx (Thu Jun 04, 2020 5:21 am) • odroid (Thu Jun 04, 2020 8:29 am) • adventureFAN (Thu Jun 04, 2020 2:37 pm) • Nikojiro (Thu Jun 04, 2020 7:44 pm)

shanti
Posts: 267
Joined: Fri Feb 15, 2019 3:12 am
languages_spoken: english, spanish
ODROIDs: Odroid N2
Has thanked: 55 times
Been thanked: 96 times
Contact:

Re: Emuelec for the Odroid Go Advance May update!

Post by shanti » Fri Jun 05, 2020 6:12 am

Just uploaded a new test version and OGA v1.1 is now supported, WiFi module and new buttons are working now. Although the image works seamlessly between both revisions, if you are using it on a rev 1.1 it is highly recommended to start with a fresh SD!

A proper changelog will come soon.

BTW a new feature has been added, video, youtube and twich support, still in the very early stages, no control yet (except for hotkey+start to quit) and it is not intended for 4k video or stuff like that :) more info soon!

link in the OP
These users thanked the author shanti for the post:
davidrx (Fri Jun 05, 2020 6:25 am)

Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 11 guests