ODROID-GO Advance

mad_ady
Posts: 8300
Joined: Wed Jul 15, 2015 5:00 pm
languages_spoken: english
ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
Location: Bucharest, Romania
Has thanked: 573 times
Been thanked: 427 times
Contact:

Re: ODROID-GO Advance

Post by mad_ady »

flowen8 wrote:Does anyone know what the refresh rate on the display will be?
Apparently 60Hz.

jutleys
Posts: 124
Joined: Fri Jul 20, 2018 1:06 am
languages_spoken: english
ODROIDs: OdroidGo
OdroidGo Advance
Location: UK
Has thanked: 10 times
Been thanked: 10 times
Contact:

Re: ODROID-GO Advance

Post by jutleys »

Hopefully it is 60hz screen min

User avatar
rooted
Posts: 7859
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 724 times
Been thanked: 220 times
Contact:

Re: ODROID-GO Advance

Post by rooted »

jutleys wrote:Hopefully it is 60hz screen min
It must be 60hz, @crashoverride already stated it did not have tearing when playing games that run at 60fps.
These users thanked the author rooted for the post:
jutleys (Tue Dec 31, 2019 7:34 pm)

alxm
Posts: 1
Joined: Wed Aug 08, 2018 7:23 am
languages_spoken: english
ODROIDs: Odroid-Go
Has thanked: 1 time
Been thanked: 0
Contact:

Re: ODROID-GO Advance

Post by alxm »

This looks great, like a modern GP2X! I like the 3:2 screen too, looking forward to working with it at some point.

HHanzo
Posts: 29
Joined: Tue Dec 31, 2019 4:17 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID-GO Advance

Post by HHanzo »

how will be CPS3 on FBA?

kamots
Posts: 87
Joined: Sun Jul 01, 2018 6:05 am
languages_spoken: english
ODROIDs: ODROID-GO, C1+, ODROID-GO Advance
Has thanked: 16 times
Been thanked: 22 times
Contact:

Re: ODROID-GO Advance

Post by kamots »

Yes it is 60hz with vsync.

HHanzo
Posts: 29
Joined: Tue Dec 31, 2019 4:17 pm
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: ODROID-GO Advance

Post by HHanzo »

If there is a new video teaser playing FBA and CPS3 60 frames i'm on.

User avatar
rooted
Posts: 7859
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 724 times
Been thanked: 220 times
Contact:

Re: ODROID-GO Advance

Post by rooted »

HHanzo wrote:If there is a new video teaser playing FBA and CPS3 60 frames i'm on.
There will be more videos in a few days I'm guessing.

What is FBA and CPS3?

*edit*
Arcade emulation, I figured it out.

jutleys
Posts: 124
Joined: Fri Jul 20, 2018 1:06 am
languages_spoken: english
ODROIDs: OdroidGo
OdroidGo Advance
Location: UK
Has thanked: 10 times
Been thanked: 10 times
Contact:

Re: ODROID-GO Advance

Post by jutleys »

The device seems to tick all the boxes and has very good potential odroid have done well to get all the hardware in place well done waiting for a sample hopefully soon.

nadenislamarre
Posts: 124
Joined: Tue Apr 26, 2016 5:18 am
languages_spoken: english
ODROIDs: xu4
Has thanked: 0
Been thanked: 22 times
Contact:

Re: ODROID-GO Advance

Post by nadenislamarre »

for information, i will port batocera.linux on this board : viewtopic.php?f=187&t=37256
These users thanked the author nadenislamarre for the post (total 2):
jutleys (Thu Jan 02, 2020 3:41 am) • SlappyMcPhee (Sat Jan 04, 2020 8:40 am)

crashoverride
Posts: 5023
Joined: Tue Dec 30, 2014 8:42 pm
languages_spoken: english
ODROIDs: C1
Has thanked: 0
Been thanked: 319 times
Contact:

Re: ODROID-GO Advance

Post by crashoverride »

mad_ady wrote:
Sat Dec 28, 2019 2:42 am
+1 for dosbox, because there's where my childhood lives :)
I tested libretro dosbox. It works and reports 60fps.

(Note that the screenshot size is 1024x768 even though only a portion is displayed. This is due to the way libretro works.)
Attachments
ScreenShot.png
ScreenShot.png (14.28 KiB) Viewed 37110 times
These users thanked the author crashoverride for the post:
mad_ady (Thu Jan 02, 2020 2:20 pm)

johannesbehr
Posts: 62
Joined: Thu Jan 03, 2019 12:21 am
languages_spoken: english
ODROIDs: Odroid-Go
Has thanked: 11 times
Been thanked: 40 times
Contact:

Re: ODROID-GO Advance

Post by johannesbehr »

Wow thats pretty amazing!!!
I guess it could also run the retropie-environment (https://retropie.org.uk/), which would open up a world of Emulators :D

The CPU A35 is closly related to the A53 which is the CPU of the Raspberry-Pi-3: https://www.toradex.com/blog/the-arm-co ... comparison

User avatar
odroid
Site Admin
Posts: 34817
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 915 times
Been thanked: 753 times
Contact:

Re: ODROID-GO Advance

Post by odroid »

You have to look into this assembly guide carefully before playing. Otherwise, you must have a difficult time or regret.
These users thanked the author odroid for the post:
rooted (Fri Jan 03, 2020 3:41 pm)

ripper121
Posts: 174
Joined: Mon Jan 28, 2019 7:00 pm
languages_spoken: english
Has thanked: 44 times
Been thanked: 22 times
Contact:

Re: ODROID-GO Advance

Post by ripper121 »

Image

Whats that "WIFI PIN Name" for?
Is it possible to connect like a ESP32 there?

User avatar
odroid
Site Admin
Posts: 34817
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 915 times
Been thanked: 753 times
Contact:

Re: ODROID-GO Advance

Post by odroid »

It is a SDIO host test pad for the future development and there is zero experimental test so far. :(
As far as I searched, ESP-WROOM-S2 (ESP8266 based) module can work in ESP8089 mode and which gives around ~10Mbps WiFi transfer speed.
It seems to be enough for two players mode on the PSP emulation.
But it is really hard to predict when we can try.
These users thanked the author odroid for the post:
ripper121 (Thu Jan 02, 2020 11:28 pm)

AreaScout
Posts: 1384
Joined: Sun Jul 07, 2013 3:05 am
languages_spoken: german, english
ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
N1, Go, VU5A, Show2, CloudShell2,
H2, N2, VU7A, VuShell, Go2, C4
Has thanked: 62 times
Been thanked: 201 times
Contact:

Re: ODROID-GO Advance

Post by AreaScout »

    @all

    Got mine today, be careful when snap the LCD into the case, take a small tip screwdriver and open the three hocks one to the next and push the LCD slightly in place
    Foto.png
    Foto.png (590.52 KiB) Viewed 37029 times
    Sorry for the bad picture quality

    RG

    jutleys
    Posts: 124
    Joined: Fri Jul 20, 2018 1:06 am
    languages_spoken: english
    ODROIDs: OdroidGo
    OdroidGo Advance
    Location: UK
    Has thanked: 10 times
    Been thanked: 10 times
    Contact:

    Re: ODROID-GO Advance

    Post by jutleys »

    @odroid admin do you have some head on shots of the device for the website the current pictures i have seen are all in angles and hard for us to add to the our website here https://www.rghandhelds.com/cbc-devices please can you upload a better picture of the device we can upload thank you so much :)

    AreaScout
    Posts: 1384
    Joined: Sun Jul 07, 2013 3:05 am
    languages_spoken: german, english
    ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
    N1, Go, VU5A, Show2, CloudShell2,
    H2, N2, VU7A, VuShell, Go2, C4
    Has thanked: 62 times
    Been thanked: 201 times
    Contact:

    Re: ODROID-GO Advance

    Post by AreaScout »

      @all

      And finally a user space library which supports turning vsync off and on ---> Yeah !

      Code: Select all

      ./testgles2
      rk-debug mali-ver=rsx-p0-1.0
      INFO: Screen bpp: 32
      INFO:
      INFO: Vendor     : ARM
      INFO: Renderer   : Mali-TDVX
      INFO: Version    : OpenGL ES 3.2 v1.r6p0-01rel0.30a65913f6f6fe30e4c007e4a5498894
      INFO: Extensions : GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth24 GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_EXT_read_format_bgra GL_OES_compressed_paletted_texture GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_image_external_essl3 GL_OES_EGL_sync GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_required_internalformat GL_OES_vertex_array_object GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_EXT_texture_rg GL_EXT_texture_type_2_10_10_10_REV GL_OES_fbo_render_mipmap GL_OES_element_index_uint GL_EXT_shadow_samplers GL_OES_texture_compression_astc GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_hdr GL_KHR_texture_compression_astc_sliced_3d GL_EXT_texture_compression_astc_decode_mode GL_KHR_debug GL_EXT_occlusion_query_boolean GL_EXT_disjoint_timer_query GL_EXT_blend_minmax GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_OES_texture_3D GL_EXT_texture_storage GL_EXT_multisampled_render_to_texture GL_OES_surfaceless_context GL_OES_texture_stencil8 GL_EXT_shader_pixel_local_storage GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_ARM_mali_program_binary GL_EXT_sRGB GL_EXT_sRGB_write_control GL_EXT_texture_sRGB_decode GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_RG8 GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_OES_texture_storage_multisample_2d_array GL_OES_shader_image_atomic GL_EXT_robustness GL_EXT_draw_buffers_indexed GL_OES_draw_buffers_indexed GL_EXT_texture_border_clamp GL_OES_texture_border_clamp GL_EXT_texture_cube_map_array GL_OES_texture_cube_map_array GL_OES_sample_variables GL_OES_sample_shading GL_OES_shader_multisample_interpolation GL_EXT_shader_io_blocks GL_OES_shader_io_blocks GL_EXT_tessellation_shader GL_OES_tessellation_shader GL_EXT_primitive_bounding_box GL_OES_primitive_bounding_box GL_EXT_geometry_shader GL_OES_geometry_shader GL_ANDROID_extension_pack_es31a GL_EXT_gpu_shader5 GL_OES_gpu_shader5 GL_EXT_texture_buffer GL_OES_texture_buffer GL_EXT_copy_image GL_OES_copy_image GL_EXT_color_buffer_half_float GL_EXT_color_buffer_float GL_EXT_YUV_target GL_OVR_multiview GL_OVR_multiview2 GL_OVR_multiview_multisampled_render_to_texture GL_KHR_robustness GL_KHR_robust_buffer_access_behavior GL_EXT_draw_elements_base_vertex GL_OES_draw_elements_base_vertex
      INFO:
      INFO: SDL_GL_RED_SIZE: requested 5, got 8
      INFO: SDL_GL_GREEN_SIZE: requested 5, got 8
      INFO: SDL_GL_BLUE_SIZE: requested 5, got 8
      INFO: SDL_GL_DEPTH_SIZE: requested 16, got 24
      INFO: 470.14 frames per second
      
      and with vsync

      Code: Select all

      ./testgles2 --vsync
      rk-debug mali-ver=rsx-p0-1.0
      INFO: Screen bpp: 32
      INFO:
      INFO: Vendor     : ARM
      INFO: Renderer   : Mali-TDVX
      INFO: Version    : OpenGL ES 3.2 v1.r6p0-01rel0.30a65913f6f6fe30e4c007e4a5498894
      INFO: Extensions : GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth24 GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_EXT_read_format_bgra GL_OES_compressed_paletted_texture GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_image_external_essl3 GL_OES_EGL_sync GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_required_internalformat GL_OES_vertex_array_object GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_EXT_texture_rg GL_EXT_texture_type_2_10_10_10_REV GL_OES_fbo_render_mipmap GL_OES_element_index_uint GL_EXT_shadow_samplers GL_OES_texture_compression_astc GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_hdr GL_KHR_texture_compression_astc_sliced_3d GL_EXT_texture_compression_astc_decode_mode GL_KHR_debug GL_EXT_occlusion_query_boolean GL_EXT_disjoint_timer_query GL_EXT_blend_minmax GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_OES_texture_3D GL_EXT_texture_storage GL_EXT_multisampled_render_to_texture GL_OES_surfaceless_context GL_OES_texture_stencil8 GL_EXT_shader_pixel_local_storage GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_ARM_mali_program_binary GL_EXT_sRGB GL_EXT_sRGB_write_control GL_EXT_texture_sRGB_decode GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_RG8 GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_OES_texture_storage_multisample_2d_array GL_OES_shader_image_atomic GL_EXT_robustness GL_EXT_draw_buffers_indexed GL_OES_draw_buffers_indexed GL_EXT_texture_border_clamp GL_OES_texture_border_clamp GL_EXT_texture_cube_map_array GL_OES_texture_cube_map_array GL_OES_sample_variables GL_OES_sample_shading GL_OES_shader_multisample_interpolation GL_EXT_shader_io_blocks GL_OES_shader_io_blocks GL_EXT_tessellation_shader GL_OES_tessellation_shader GL_EXT_primitive_bounding_box GL_OES_primitive_bounding_box GL_EXT_geometry_shader GL_OES_geometry_shader GL_ANDROID_extension_pack_es31a GL_EXT_gpu_shader5 GL_OES_gpu_shader5 GL_EXT_texture_buffer GL_OES_texture_buffer GL_EXT_copy_image GL_OES_copy_image GL_EXT_color_buffer_half_float GL_EXT_color_buffer_float GL_EXT_YUV_target GL_OVR_multiview GL_OVR_multiview2 GL_OVR_multiview_multisampled_render_to_texture GL_KHR_robustness GL_KHR_robust_buffer_access_behavior GL_EXT_draw_elements_base_vertex GL_OES_draw_elements_base_vertex
      INFO:
      INFO: SDL_GL_RED_SIZE: requested 5, got 8
      INFO: SDL_GL_GREEN_SIZE: requested 5, got 8
      INFO: SDL_GL_BLUE_SIZE: requested 5, got 8
      INFO: SDL_GL_DEPTH_SIZE: requested 16, got 24
      CINFO: 60.19 frames per second
      
      But it says that it is an debug version, which normally makes it slower (-O0), but 470fps for a debug version is cool, I take that :lol: Have to look more in-deep for that

      RG
      These users thanked the author AreaScout for the post (total 3):
      odroid (Fri Jan 03, 2020 9:33 am) • SlappyMcPhee (Sat Jan 04, 2020 8:40 am) • joy (Mon Jan 06, 2020 6:55 pm)

      Paspartout
      Posts: 48
      Joined: Fri Dec 28, 2018 2:13 am
      languages_spoken: english, german
      ODROIDs: Odroid go
      Has thanked: 11 times
      Been thanked: 15 times
      Contact:

      Re: ODROID-GO Advance

      Post by Paspartout »

      What does ./testgles2 display? Is it some benchmark like the glxgears on desktop Linux? Nice to see that the driver supports modern OpenGL ES. Would be interested how much difference vulkan would make for a similar benchmark or scene.

      AreaScout
      Posts: 1384
      Joined: Sun Jul 07, 2013 3:05 am
      languages_spoken: german, english
      ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
      N1, Go, VU5A, Show2, CloudShell2,
      H2, N2, VU7A, VuShell, Go2, C4
      Has thanked: 62 times
      Been thanked: 201 times
      Contact:

      Re: ODROID-GO Advance

      Post by AreaScout »

      @Paspartout

      testgles2 is part of the SDL2 testsuit, here is how to compile it viewtopic.php?f=98&t=32173 it's just a spinning cube with rainbow colors on the surface

      RG

      crashoverride
      Posts: 5023
      Joined: Tue Dec 30, 2014 8:42 pm
      languages_spoken: english
      ODROIDs: C1
      Has thanked: 0
      Been thanked: 319 times
      Contact:

      Re: ODROID-GO Advance

      Post by crashoverride »

      AreaScout wrote:
      Fri Jan 03, 2020 4:39 am
      But it says that it is an debug version
      The libmali is from here:
      https://github.com/rockchip-linux/libma ... xp0-gbm.so

      Presumably, you could post an issue to the Rockchip github that its a debug version.

      User avatar
      odroid
      Site Admin
      Posts: 34817
      Joined: Fri Feb 22, 2013 11:14 pm
      languages_spoken: English, Korean, Japanese
      ODROIDs: ODROID
      Has thanked: 915 times
      Been thanked: 753 times
      Contact:

      Re: ODROID-GO Advance

      Post by odroid »

      @AreaScout,
      Did you use this trial OS image?
      https://wiki.odroid.com/odroid_go_advan ... d_os_image

      AreaScout
      Posts: 1384
      Joined: Sun Jul 07, 2013 3:05 am
      languages_spoken: german, english
      ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
      N1, Go, VU5A, Show2, CloudShell2,
      H2, N2, VU7A, VuShell, Go2, C4
      Has thanked: 62 times
      Been thanked: 201 times
      Contact:

      Re: ODROID-GO Advance

      Post by AreaScout »

        @odroid

        It came pre-installed on the Micro SD, but I guess yes

        RG

        AreaScout
        Posts: 1384
        Joined: Sun Jul 07, 2013 3:05 am
        languages_spoken: german, english
        ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
        N1, Go, VU5A, Show2, CloudShell2,
        H2, N2, VU7A, VuShell, Go2, C4
        Has thanked: 62 times
        Been thanked: 201 times
        Contact:

        Re: ODROID-GO Advance

        Post by AreaScout »


        HHanzo
        Posts: 29
        Joined: Tue Dec 31, 2019 4:17 pm
        languages_spoken: english
        Has thanked: 0
        Been thanked: 0
        Contact:

        Re: ODROID-GO Advance

        Post by HHanzo »

        that means the maximum console to emulate will be PSP but, how about Dreamcast?
        I want at least a 2.5D fighting games run well like MVC2 and CVS2 and Project Justice

        ripper121
        Posts: 174
        Joined: Mon Jan 28, 2019 7:00 pm
        languages_spoken: english
        Has thanked: 44 times
        Been thanked: 22 times
        Contact:

        Re: ODROID-GO Advance

        Post by ripper121 »

        Is it possible to get like a Development Version to get into it?

        Shan
        Posts: 10
        Joined: Sun Sep 22, 2019 9:58 am
        languages_spoken: english
        ODROIDs: None at the moment!
        Location: Sunshine Coast, QLD, Australia
        Has thanked: 0
        Been thanked: 0
        Contact:

        Re: ODROID-GO Advance

        Post by Shan »

        Hi All,

        Looks great and just what I'm looking for to satisfy my handheld retro cravings :)

        Just one question... Why only 1GB RAM? I would quite happily pay an extra $10 or so for 4GB (based on DigiKey prices, that would be roughly the cost to go from 1GB to 4GB).

        Keep up the good work and now I'm waiting for release ;)

        crashoverride
        Posts: 5023
        Joined: Tue Dec 30, 2014 8:42 pm
        languages_spoken: english
        ODROIDs: C1
        Has thanked: 0
        Been thanked: 319 times
        Contact:

        Re: ODROID-GO Advance

        Post by crashoverride »

        Shan wrote:
        Sat Jan 04, 2020 7:51 am
        Why only 1GB RAM?
        Running the emulators, most of the RAM goes unused. Adding more RAM would not (currently) benefit the device and would drain the battery faster.
        These users thanked the author crashoverride for the post:
        SlappyMcPhee (Sat Jan 04, 2020 8:38 am)

        SlappyMcPhee
        Posts: 105
        Joined: Fri Aug 18, 2017 2:09 pm
        languages_spoken: english
        ODROIDs: XU4 (3 of them)
        Has thanked: 6 times
        Been thanked: 5 times
        Contact:

        Re: ODROID-GO Advance

        Post by SlappyMcPhee »

        I see on the wiki that wifi is supported via the standard Odroid dongles (WiFi module 0, WiFi module 3, WiFi module 5A). How about bluetooth possibly for audio?
        Owner The Retro Arena and Odroid Retro Arena

        SlappyMcPhee
        Posts: 105
        Joined: Fri Aug 18, 2017 2:09 pm
        languages_spoken: english
        ODROIDs: XU4 (3 of them)
        Has thanked: 6 times
        Been thanked: 5 times
        Contact:

        Re: ODROID-GO Advance

        Post by SlappyMcPhee »

        lordhardware wrote:
        Sun Dec 29, 2019 3:38 pm
        Is there no Bluetooth or wifi?

        That's the biggest point of difference with the odroid Go from any other handheld.

        AliExpress has 12 handhelds as powerful and in the same price bracket as this.

        Please put official Bluetooth or wifi add-on with this.
        I wouldn't consider any of those vendors/manufacturers legitimate in any conversation especially from a development standpoint. Also my experiences with those types of devices as well as others I know is that wifi is garbage due to lack of proper beacon strength and BT is spotty at best to include the quality of BT audio. An external adapter will ALWAYS trump onboard with lower end devices.
        Owner The Retro Arena and Odroid Retro Arena

        User avatar
        rooted
        Posts: 7859
        Joined: Fri Dec 19, 2014 9:12 am
        languages_spoken: english
        Location: Gulf of Mexico, US
        Has thanked: 724 times
        Been thanked: 220 times
        Contact:

        Re: ODROID-GO Advance

        Post by rooted »

        By looking at the attached UART and the cutout in the case, the plug should have been facing out the back instead of the side. No big deal for me, I can just Dremel it out.

        Is the retail version going to have UART?
        ImageImage

        Paspartout
        Posts: 48
        Joined: Fri Dec 28, 2018 2:13 am
        languages_spoken: english, german
        ODROIDs: Odroid go
        Has thanked: 11 times
        Been thanked: 15 times
        Contact:

        Re: ODROID-GO Advance

        Post by Paspartout »

        SlappyMcPhee wrote:
        Sat Jan 04, 2020 8:39 am
        I see on the wiki that wifi is supported via the standard Odroid dongles (WiFi module 0, WiFi module 3, WiFi module 5A). How about bluetooth possibly for audio?
        The device is running linux, so in theory every bluetooth dongle supported by linux drivers should work(assuming driver is included in the built kernel/os). For audio you would also need bluez and probably pulseaudio(or this?). I imagine setting this up can be annoying though.

        lordhardware
        Posts: 174
        Joined: Sat Sep 20, 2014 11:56 pm
        languages_spoken: english
        ODROIDs: U3
        Odroid-W
        Has thanked: 42 times
        Been thanked: 22 times
        Contact:

        Re: ODROID-GO Advance

        Post by lordhardware »

        SlappyMcPhee wrote:
        Sat Jan 04, 2020 8:45 am
        lordhardware wrote:
        Sun Dec 29, 2019 3:38 pm
        Is there no Bluetooth or wifi?

        That's the biggest point of difference with the odroid Go from any other handheld.

        AliExpress has 12 handhelds as powerful and in the same price bracket as this.

        Please put official Bluetooth or wifi add-on with this.
        I wouldn't consider any of those vendors/manufacturers legitimate in any conversation especially from a development standpoint. Also my experiences with those types of devices as well as others I know is that wifi is garbage due to lack of proper beacon strength and BT is spotty at best to include the quality of BT audio. An external adapter will ALWAYS trump onboard with lower end devices.
        I agree with you, however, convenience means broad base appeal.

        Broad base appeal means higher sales volume.

        Higher sales volume means greater after sales support and likely more devices like this from Hardkernal which is good for all of us.


        There is a large deficiency in the open handheld market which this device slots right into and I want Hardkernal to focus on that in order to differentiate.

        User avatar
        rooted
        Posts: 7859
        Joined: Fri Dec 19, 2014 9:12 am
        languages_spoken: english
        Location: Gulf of Mexico, US
        Has thanked: 724 times
        Been thanked: 220 times
        Contact:

        Re: ODROID-GO Advance

        Post by rooted »

        Anyone looking at getting this device simply put it's worth every penny.

        Dropped some ROMs onto the SD, plugged a USB 3.0 hub with integrated network, scraped, and away I went.

        Worried about viewing angles, don't be as they are good, sound is good, brightness and screen quality is great. So far I've tried a lot of NES, GBA, and SNES games and all have performed flawlessly. The D-pad has edges that are a bit sharp but after a couple hours of play my thumb isn't hurting at all, the analog is good but I wish it had more texture.

        I will get to the other emulators tomorrow.

        Since this is running Ubuntu you have access to that by way of SSH, so it's a powerful little platform.

        Another great Hardkernel device, this will be very popular so if you want one it will likely sell out.

        User avatar
        rooted
        Posts: 7859
        Joined: Fri Dec 19, 2014 9:12 am
        languages_spoken: english
        Location: Gulf of Mexico, US
        Has thanked: 724 times
        Been thanked: 220 times
        Contact:

        Re: ODROID-GO Advance

        Post by rooted »

        Quick iperf test using USB Ethernet, mine is AX88179 based (not great).

        Code: Select all

        Client connecting to 192.168.0.2, TCP port 5001
        TCP window size: 65.6 KByte (default)
        ------------------------------------------------------------
        [  3] local 192.168.0.18 port 48510 connected with 192.168.0.2 port 5001
        [ ID] Interval       Transfer     Bandwidth
        [  3]  0.0-20.0 sec   722 MBytes   303 Mbits/sec
        

        User avatar
        rooted
        Posts: 7859
        Joined: Fri Dec 19, 2014 9:12 am
        languages_spoken: english
        Location: Gulf of Mexico, US
        Has thanked: 724 times
        Been thanked: 220 times
        Contact:

        Re: ODROID-GO Advance

        Post by rooted »

        I forgot to mention, when scraping I had to push a button (any button) after every five titles to continue scraping.

        I logged in over SSH and watched the CPU usage, when it stopped scraping the CPU usage also stopped. Some type of bug I guess?
        These users thanked the author rooted for the post:
        lordhardware (Sat Jan 04, 2020 1:16 pm)

        mad_ady
        Posts: 8300
        Joined: Wed Jul 15, 2015 5:00 pm
        languages_spoken: english
        ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
        Location: Bucharest, Romania
        Has thanked: 573 times
        Been thanked: 427 times
        Contact:

        Re: ODROID-GO Advance

        Post by mad_ady »

        Not bad network performance considering it's over usb2. I could get only ~240Mbps with a usb dongle on a C2.
        These users thanked the author mad_ady for the post:
        rooted (Sat Jan 04, 2020 3:54 pm)

        User avatar
        rooted
        Posts: 7859
        Joined: Fri Dec 19, 2014 9:12 am
        languages_spoken: english
        Location: Gulf of Mexico, US
        Has thanked: 724 times
        Been thanked: 220 times
        Contact:

        Re: ODROID-GO Advance

        Post by rooted »

        mad_ady wrote:Not bad network performance considering it's over usb2. I could get only ~240Mbps with a usb dongle on a C2.
        Yeah I was surprised it was that good, that particular USB 3.0 networking adapter doesn't do much better when using it on the XU4 over 3.0.

        Code: Select all

        ------------------------------------------------------------
        [  4]  0.0-20.0 sec  1.30 GBytes   556 Mbits/sec
        

        User avatar
        rooted
        Posts: 7859
        Joined: Fri Dec 19, 2014 9:12 am
        languages_spoken: english
        Location: Gulf of Mexico, US
        Has thanked: 724 times
        Been thanked: 220 times
        Contact:

        Re: ODROID-GO Advance

        Post by rooted »

        The female barrel connecter is too shallow (or the male end is too long), can a shorter barrel cable be sourced?

        *edit* I searched and apparently no, shorter barrel length is not something you can readily find.

        *edit2* I wasn't inserting the power connector far enough into the jack, it's tight upon initial use and requires a bit of pressure.

        Charging on the Smart Power is showing 1.547 A @ 8.118 Watts for reference.

        Another thing so people know, the device will charge while off but the red charge LED will not be lit.

        Last edited by rooted on Sat Jan 04, 2020 5:53 pm, edited 1 time in total.

        mad_ady
        Posts: 8300
        Joined: Wed Jul 15, 2015 5:00 pm
        languages_spoken: english
        ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
        Location: Bucharest, Romania
        Has thanked: 573 times
        Been thanked: 427 times
        Contact:

        Re: ODROID-GO Advance

        Post by mad_ady »

        @rooted I'm curious if the advance can run without battery - only with mains power.

        Regarding debug uart - I'm sure one can use the uart pins on the 10 pin header for debug with uboot + kernel reconfiguration.

        AreaScout
        Posts: 1384
        Joined: Sun Jul 07, 2013 3:05 am
        languages_spoken: german, english
        ODROIDs: X2, U3, XU3, C2, HiFi Shield, XU4, XU4Q,
        N1, Go, VU5A, Show2, CloudShell2,
        H2, N2, VU7A, VuShell, Go2, C4
        Has thanked: 62 times
        Been thanked: 201 times
        Contact:

        Re: ODROID-GO Advance

        Post by AreaScout »

          I forgot that with memory, gpu and cpu governor set to performance I get this:

          Code: Select all

          root@goadvance:/sys# cat devices/platform/ff400000.gpu/devfreq/ff400000.gpu/governor
          performance
          root@goadvance:/sys# cat devices/platform/dmc/devfreq/dmc/governor
          performance
          root@goadvance:/sys# cat devices/system/cpu/cpufreq/policy0/scaling_governor
          performance
          

          Code: Select all

          ./testgles2
          rk-debug mali-ver=rsx-p0-1.0
          INFO: Screen bpp: 32
          INFO:
          INFO: Vendor     : ARM
          INFO: Renderer   : Mali-TDVX
          INFO: Version    : OpenGL ES 3.2 v1.r6p0-01rel0.30a65913f6f6fe30e4c007e4a5498894
          INFO: Extensions : GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth24 GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_EXT_read_format_bgra GL_OES_compressed_paletted_texture GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_image_external_essl3 GL_OES_EGL_sync GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_required_internalformat GL_OES_vertex_array_object GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_EXT_texture_rg GL_EXT_texture_type_2_10_10_10_REV GL_OES_fbo_render_mipmap GL_OES_element_index_uint GL_EXT_shadow_samplers GL_OES_texture_compression_astc GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_hdr GL_KHR_texture_compression_astc_sliced_3d GL_EXT_texture_compression_astc_decode_mode GL_KHR_debug GL_EXT_occlusion_query_boolean GL_EXT_disjoint_timer_query GL_EXT_blend_minmax GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_OES_texture_3D GL_EXT_texture_storage GL_EXT_multisampled_render_to_texture GL_OES_surfaceless_context GL_OES_texture_stencil8 GL_EXT_shader_pixel_local_storage GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_ARM_mali_program_binary GL_EXT_sRGB GL_EXT_sRGB_write_control GL_EXT_texture_sRGB_decode GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_RG8 GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_OES_texture_storage_multisample_2d_array GL_OES_shader_image_atomic GL_EXT_robustness GL_EXT_draw_buffers_indexed GL_OES_draw_buffers_indexed GL_EXT_texture_border_clamp GL_OES_texture_border_clamp GL_EXT_texture_cube_map_array GL_OES_texture_cube_map_array GL_OES_sample_variables GL_OES_sample_shading GL_OES_shader_multisample_interpolation GL_EXT_shader_io_blocks GL_OES_shader_io_blocks GL_EXT_tessellation_shader GL_OES_tessellation_shader GL_EXT_primitive_bounding_box GL_OES_primitive_bounding_box GL_EXT_geometry_shader GL_OES_geometry_shader GL_ANDROID_extension_pack_es31a GL_EXT_gpu_shader5 GL_OES_gpu_shader5 GL_EXT_texture_buffer GL_OES_texture_buffer GL_EXT_copy_image GL_OES_copy_image GL_EXT_color_buffer_half_float GL_EXT_color_buffer_float GL_EXT_YUV_target GL_OVR_multiview GL_OVR_multiview2 GL_OVR_multiview_multisampled_render_to_texture GL_KHR_robustness GL_KHR_robust_buffer_access_behavior GL_EXT_draw_elements_base_vertex GL_OES_draw_elements_base_vertex
          INFO:
          INFO: SDL_GL_RED_SIZE: requested 5, got 8
          INFO: SDL_GL_GREEN_SIZE: requested 5, got 8
          INFO: SDL_GL_BLUE_SIZE: requested 5, got 8
          INFO: SDL_GL_DEPTH_SIZE: requested 16, got 24
          INFO: 675.38 frames per second
          
          So don't forget to change that from on_demand to performance when you are testing ;)

          RG

          User avatar
          rooted
          Posts: 7859
          Joined: Fri Dec 19, 2014 9:12 am
          languages_spoken: english
          Location: Gulf of Mexico, US
          Has thanked: 724 times
          Been thanked: 220 times
          Contact:

          Re: ODROID-GO Advance

          Post by rooted »

          mad_ady wrote:@rooted I'm curious if the advance can run without battery - only with mains power.

          Regarding debug uart - I'm sure one can use the uart pins on the 10 pin header for debug with uboot + kernel reconfiguration.
          Almost certain that it can, I will pull it apart and check if no one answers you.

          lordhardware
          Posts: 174
          Joined: Sat Sep 20, 2014 11:56 pm
          languages_spoken: english
          ODROIDs: U3
          Odroid-W
          Has thanked: 42 times
          Been thanked: 22 times
          Contact:

          Re: ODROID-GO Advance

          Post by lordhardware »

          If you find specific things that require investigation probably best to make individual threads, we're only at page two of this announcement thread and already there's 6 posts worth of content here.

          crashoverride
          Posts: 5023
          Joined: Tue Dec 30, 2014 8:42 pm
          languages_spoken: english
          ODROIDs: C1
          Has thanked: 0
          Been thanked: 319 times
          Contact:

          Re: ODROID-GO Advance

          Post by crashoverride »

          rooted wrote:
          Sat Jan 04, 2020 5:53 pm
          The female barrel connecter is too shallow (or the male end is too long),
          I encountered that issue too. It turns out the connector is really tight the first time used. With gentle pressure, it will fully insert. After the first time, its no longer an issue. I do keep putting the charge cable in the headphone port though.
          rooted wrote:
          Sat Jan 04, 2020 12:51 pm
          when scraping I had to push a button (any button) after every five titles to continue scraping.
          That is the behavior from upstream. I think its to limit bandwidth consumption on the scraping site.
          AreaScout wrote:
          Sun Jan 05, 2020 4:28 am
          with memory, gpu and cpu governor set to performance
          Keep in mind this will affect battery life (HK's estimate is with the "on demand" governor). I would like to find a way to dynamically control the governors based on the emulator used in the future.
          These users thanked the author crashoverride for the post:
          rooted (Sun Jan 05, 2020 1:15 pm)

          User avatar
          rooted
          Posts: 7859
          Joined: Fri Dec 19, 2014 9:12 am
          languages_spoken: english
          Location: Gulf of Mexico, US
          Has thanked: 724 times
          Been thanked: 220 times
          Contact:

          Re: ODROID-GO Advance

          Post by rooted »

          crashoverride wrote: I encountered that issue too. It turns out the connector is really tight the first time used. With gentle pressure, it will fully insert. After the first time, its no longer an issue.
          Thank you, I was very worried about the quality of connection but I did as you said and sure enough the connection is much better than I thought.

          mad_ady
          Posts: 8300
          Joined: Wed Jul 15, 2015 5:00 pm
          languages_spoken: english
          ODROIDs: XU4, C1+, C2, C4, N1, N2, H2, Go, Go Advance
          Location: Bucharest, Romania
          Has thanked: 573 times
          Been thanked: 427 times
          Contact:

          Re: ODROID-GO Advance

          Post by mad_ady »

          Almost certain that it can, I will pull it apart and check if no one answers you.
          Don't pull it apart for me. I'll test myself when I get my sample, thanks!

          mangaldasan
          Posts: 30
          Joined: Sat Nov 10, 2018 4:01 am
          languages_spoken: english
          ODROIDs: Odroid-XU4;CouldShell-2;Odroid-N2-4Gb Corelec Version
          Has thanked: 4 times
          Been thanked: 0
          Contact:

          Re: ODROID-GO Advance

          Post by mangaldasan »

          Wow...great job and product from Hardkernel Team. Can't wait till the month end. Already 2 piece order in my hand.
          You guys are rocking....Congratulations !

          User avatar
          odroid
          Site Admin
          Posts: 34817
          Joined: Fri Feb 22, 2013 11:14 pm
          languages_spoken: English, Korean, Japanese
          ODROIDs: ODROID
          Has thanked: 915 times
          Been thanked: 753 times
          Contact:

          Re: ODROID-GO Advance

          Post by odroid »

          rooted wrote:
          Sat Jan 04, 2020 9:56 am
          Is the retail version going to have UART?
          There will be no UART port in the normal version. It is available in the Developers' Edition only.
          These users thanked the author odroid for the post (total 2):
          rooted (Mon Jan 06, 2020 10:53 am) • lordhardware (Mon Jan 06, 2020 2:28 pm)

          ripper121
          Posts: 174
          Joined: Mon Jan 28, 2019 7:00 pm
          languages_spoken: english
          Has thanked: 44 times
          Been thanked: 22 times
          Contact:

          Re: ODROID-GO Advance

          Post by ripper121 »

          odroid wrote:
          Mon Jan 06, 2020 9:50 am
          rooted wrote:
          Sat Jan 04, 2020 9:56 am
          Is the retail version going to have UART?
          There will be no UART port in the normal version. It is available in the Developers' Edition only.
          So it will be no connector mounted but the Pins on the PCB will be there?

          User avatar
          odroid
          Site Admin
          Posts: 34817
          Joined: Fri Feb 22, 2013 11:14 pm
          languages_spoken: English, Korean, Japanese
          ODROIDs: ODROID
          Has thanked: 915 times
          Been thanked: 753 times
          Contact:

          Re: ODROID-GO Advance

          Post by odroid »

          Right. You can solder a connector or wires.
          These users thanked the author odroid for the post:
          ripper121 (Mon Jan 06, 2020 6:53 pm)

          Locked

          Return to “General Topics”

          Who is online

          Users browsing this forum: No registered users and 1 guest