LG TV에서 HDMI로 화면 출력이 안됩니다.

Post Reply
parksy
Posts: 3
Joined: Thu Mar 05, 2020 10:42 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

LG TV에서 HDMI로 화면 출력이 안됩니다.

Unread post by parksy » Thu Mar 05, 2020 11:15 am

몇일전 부팅이 안된다고 A/S 보냈다가 이상없음으로 돌려 받았습니다.

원인을 알게되었는데 ... LG 스마트TV와 HDMI로 연결하면 인식이 안되는지 화면 출력이 안됩니다.
물론 TV에 라즈베리 파이 등 다른것을 연결하면 TV출력이 안됩니다.

N2에 다른 모니터를 연결하면 정상적으로 출력 됩니다.
오직 N2 => LG TV인 경우에만 화면/신호가 안나옵니다.

그런데 처음 구입후 TV와 연결했을 때는 잠시(30분이내) 화면이 잘 나왔었습니다.
OS를 업데이트 한 이후 부터 문제가 발생했지만 ... 그 뒤부터는

그러나 흥미로은 점은 CoreELEC으로 부팅하면 지금도 화면이 잘 나옵니다.

N2관련 자료를 검색해보니
EDID 관련 이슈가 있는것 같아 관련된 정보를 올립니다.
viewtopic.php?t=37245

확인 부탁드립니다.

**** 2020-03-06 내용 추가합니다. ****
HDMI 케이블을 빼고 부팅하고 HDMI 케이블을 연결하면 TV 화면이 나옵니다.
화면해상도는 1920x1080으로 고정되어 있고 모니터 종류는 알 수 없음으로 표시됩니다.

######################################################
# ODROID-N2 HDMI / EDID
# viewtopic.php?t=37245

$ cat /sys/class/amhdmitx/amhdmitx0/disp_cap
480p60hz
720p60hz*
1080i60hz
1080p60hz
1080p30hz
1080p24hz

$ cat /sys/class/amhdmitx/amhdmitx0/preferred_mode
1080p60hz

$ cat /sys/class/amhdmitx/amhdmitx0/rawedid
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

$ cat /sys/devices/virtual/amhdmitx/amhdmitx0/edid
Rx Manufacturer Name: GSM
Rx Product Code: 0001
Rx Serial Number: 01010101
Rx Product Name: LG
Manufacture Week: 1
Manufacture Year: 2011
Physcial size(cm): 16 x 9
EDID Version: 1.3
EDID block number: 0x1
blk0 chksum: 0x7f
Source Physical Address[a.b.c.d]: 2.0.0.0
native Mode f1, VIC (native 4):
ColorDeepSupport b8
16 34 32 5 4 3 2 1
Audio {format, channel, freq, cce}
{2, 5, 7, 50}
{1, 1, 7, 7}
Speaker Allocation: 0
Vendor: 0xc03 ( HDMI device)
MaxTMDSClock1 225 MHz
vLatency: Invalid/Unknown
aLatency: Invalid/Unknown
i_vLatency: Invalid/Unknown
i_aLatency: Invalid/Unknown
ColorMetry: 0x3
SCDC: 0
RR_Cap: 0
LTE_340M_Scramble: 0
DeepColor
checkvalue: 0x7fed0000



$ sudo dmesg

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.213-67 (root@builder_n2) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #1 SMP PREEMPT Thu Feb 13 14:59:00 -03 2020
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
[    0.000000] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000ed800000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: __reserved_mem_alloc_size, start:0x000000007f800000, end:0x0000000080000000, len:8 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x000000007f800000, size 8 MiB
[    0.000000] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000e5800000, size 128 MiB
[    0.000000] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000e3000000, size 40 MiB
[    0.000000] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000cfc00000, size 308 MiB
[    0.000000] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000] OF: reserved mem: invalid size property in 'linux,galcore' node.
[    0.000000] cma: Reserved 8 MiB at 0x00000000cf400000
[    0.000000] On node 0 totalpages: 972800
[    0.000000]   DMA zone: 15200 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 972800 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 21 pages/cpu s47896 r8192 d29928 u86016
[    0.000000] pcpu-alloc: s47896 r8192 d29928 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 957600
[    0.000000] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait rw console=ttyS0,115200n8  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=custombuilt cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi modeline=1920,1080,148500,67500,60,1920,2008,2052,2200,1080,1084,1089,1125,1,1,1 disablehpd=false cvbscable= overscan=100  monitor_onoff=false logo=osd0,loaded hdmitx=cec3f
[    0.000000] vout: get hdmimode: custombuilt
[    0.000000] vout: get cvbsmode: 576cvbs
[    0.000000] [get_max_freq_a53] - max_freq : 1896000
[    0.000000] [get_max_freq_a73] - max_freq : 1800000
[    0.000000] hdmitx: voutmode : 1
[    0.000000] fmt_para.timing
[    0.000000]    - pixel_freq 148500, frac_freq 148500
[    0.000000]    - h_freq 67500, v_freq 60000
[    0.000000]    - hsync_polarity 1, vsync_polarity 1
[    0.000000]    - h_active 1920, h_total 2200
[    0.000000]    - h_blank 280, h_front 88, h_sync 44, h_back 148
[    0.000000]    - v_active 1080, v_total 1125
[    0.000000]    - v_blank 45, v_front 4, v_sync 5, v_back 36
[    0.000000]    - v_sync_ln 1
[    0.000000] fmt_para.hdmitx_vinfo
[    0.000000]    - name custombuilt, mode 0
[    0.000000]    - width 1920, height 1080, field_height 1080
[    0.000000]    - aspect_ratio_num 16, aspect_ratio_den 9
[    0.000000]    - video_clk 148500000
[    0.000000]    - htotal 2200, vtotal 1125
[    0.000000]    - viu_color_fmt 2, viu_mux 2
[    0.000000] fb: osd0
[    0.000000] fb: loaded
[    0.000000] hdmitx: HDMI hdmi_cec_func_config:0x3f
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3275916K/3891200K available (11772K kernel code, 1714K rwdata, 5272K rodata, 4864K init, 1352K bss, 107380K reserved, 507904K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000]       .text : 0xffffff8009080000 - 0xffffff8009c00000   ( 11776 KB)
[    0.000000]     .rodata : 0xffffff8009c00000 - 0xffffff800a130000   (  5312 KB)
[    0.000000]       .init : 0xffffff800a130000 - 0xffffff800a5f0000   (  4864 KB)
[    0.000000]       .data : 0xffffff800a5f0000 - 0xffffff800a79ca00   (  1715 KB)
[    0.000000]        .bss : 0xffffff800a79ca00 - 0xffffff800a8eeb7c   (  1353 KB)
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf03b60000   (    59 MB actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc0ed800000   (  3800 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GPIO-INTC: support to detect double-edge trigger signal
[    0.000000] g12a_aoclkc_init: register ao clk ok!
[    0.000000] Meson chip version = RevA (29:A - 40:0)
[    0.000000] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000] meson_g12a_gpu_init: register meson gpu clk
[    0.000000] meson_g12a_media_init: register meson media clk
[    0.000000] meson_g12a_misc_init: register amlogic g12a misc clks
[    0.000000] meson_g12a_misc_init: done.
[    0.000000] g12a_clkc_init initialization complete
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000037] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
[    0.000593] Console: colour dummy device 80x25
[    0.000610] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000619] pid_max: default: 32768 minimum: 301
[    0.000708] Security Framework initialized
[    0.000715] SELinux:  Initializing.
[    0.000749] SELinux:  Starting in permissive mode
[    0.000777] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000785] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001376] ftrace: allocating 38471 entries in 151 pages
[    0.067728] sched-energy: Sched-energy-costs installed from DT
[    0.067740] CPU0: update cpu_capacity 631
[    0.067751] ASID allocator initialised with 65536 entries
[    0.114043] secmon: clear_range:5100000 200000
[    0.114174] EFI services will not be available.
[    0.159933] Detected VIPT I-cache on CPU1
[    0.159982] CPU1: update cpu_capacity 631
[    0.159984] CPU1: Booted secondary processor [410fd034]
[    0.192457] Detected VIPT I-cache on CPU2
[    0.192498] CPU2: update cpu_capacity 920
[    0.192501] CPU2: Booted secondary processor [410fd092]
[    0.224011] Detected VIPT I-cache on CPU3
[    0.224034] CPU3: update cpu_capacity 920
[    0.224036] CPU3: Booted secondary processor [410fd092]
[    0.256070] Detected VIPT I-cache on CPU4
[    0.256091] CPU4: update cpu_capacity 920
[    0.256093] CPU4: Booted secondary processor [410fd092]
[    0.288139] Detected VIPT I-cache on CPU5
[    0.288161] CPU5: update cpu_capacity 920
[    0.288163] CPU5: Booted secondary processor [410fd092]
[    0.288243] Brought up 6 CPUs
[    0.288281] SMP: Total of 6 processors activated.
[    0.288290] CPU features: detected feature: 32-bit EL0 Support
[    0.288407] CPU: All CPU(s) started at EL2
[    0.288443] alternatives: patching kernel code
[    0.290054] devtmpfs: initialized
[    0.304456] DMI not present or invalid.
[    0.304727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.304745] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.304954] pinctrl core: initialized pinctrl subsystem
[    0.305715] NET: Registered protocol family 16
[    0.307130] schedtune: init normalization constants...
[    0.307141] schedtune: CLUSTER[0-1]      min_pwr:     0 max_pwr:    42
[    0.307147] schedtune: CPU[0]            min_pwr:     0 max_pwr:   279
[    0.307153] schedtune: CPU[1]            min_pwr:     0 max_pwr:   279
[    0.307158] schedtune: CLUSTER[2-5]      min_pwr:     0 max_pwr:    64
[    0.307163] schedtune: CPU[2]            min_pwr:     0 max_pwr:   759
[    0.307168] schedtune: CPU[3]            min_pwr:     0 max_pwr:   759
[    0.307174] schedtune: CPU[4]            min_pwr:     0 max_pwr:   759
[    0.307179] schedtune: CPU[5]            min_pwr:     0 max_pwr:   759
[    0.307184] schedtune: SYSTEM            min_pwr:     0 max_pwr:  3700
[    0.307189] schedtune: using normalization constants mul: 459677581 sh1: 1 sh2: 11
[    0.307193] schedtune: verify normalization constants...
[    0.307197] schedtune: max_pwr/2^0: 3700 => norm_pwr:  1024
[    0.307202] schedtune: max_pwr/2^1: 1850 => norm_pwr:   512
[    0.307206] schedtune: max_pwr/2^2:  925 => norm_pwr:   256
[    0.307210] schedtune: max_pwr/2^3:  462 => norm_pwr:   127
[    0.307214] schedtune: max_pwr/2^4:  231 => norm_pwr:    63
[    0.307218] schedtune: max_pwr/2^5:  115 => norm_pwr:    31
[    0.307222] schedtune: configured to support global boosting only
[    0.316081] cpuidle: using governor menu
[    0.316187] register canvas platform driver
[    0.316222] register rdma platform driver
[    0.316248] aml_vdac_init: module init
[    0.317562] vdso: 2 pages (1 code @ ffffff8009c07000, 1 data @ ffffff800a5f5000)
[    0.317580] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.319054] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.319252] clkmsr: clkmsr: driver init
[    0.319259] codec_mm_module_init
[    0.319290] media_configs_system_init
[    0.320244] pstore: using zlib compression
[    0.320747] console [pstore-1] enabled
[    0.320753] pstore: Registered ramoops as persistent store backend
[    0.320760] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.322485] aml_iomap: amlogic iomap probe done
[    0.322860] vpu: driver version: v20190329(8-g12b)
[    0.322875] vpu: load vpu_clk: 666666667Hz(7)
[    0.323064] vpu: clktree_init
[    0.323128] vpu: vpu_probe OK
[    0.328005] clkmsr: msr_clk_reg0=ffffff800837e004,msr_clk_reg2=ffffff800845100c
[    0.328024] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.331965] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
[    0.332188] aml_vdac_probe: ok
[    0.332372] canvas_probe reg=00000000ff638000,size=2000
[    0.332394] canvas maped reg_base =ffffff8008454000
[    0.338780] rdma_probe,cpu_type:1, ver:0, len:8
[    0.339026] rdma_register, rdma_table_addr ffffff8008475000 rdma_table_addr_phy cf600000 reg_buf ffffffc0ca2a8000
[    0.339038] rdma_register success, handle 1 table_size 32768
[    0.339045] set_rdma_handle video rdma handle = 1.
[    0.340004] aml_snd_reg_map[0], reg:ff640000, size:2000
[    0.340025] aml_snd_reg_map[1], reg:ff642000, size:2000
[    0.340037] aml_snd_reg_map[2], reg:ff64a000, size:2000
[    0.340048] aml_snd_reg_map[3], reg:ff656000, size:1800
[    0.340065] aml_snd_reg_map[4], reg:ffd01000, size:1000
[    0.340070] amlogic auge_snd_iomap probe done
[    0.342307] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.342431] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.342440] codec_mm_probe ok
[    0.343936] cvbs_out: cvbsout_probe, cpu_id:5,name:meson-g12b-cvbsout
[    0.343958] cvbs_out: clk path:0
[    0.343965] cvbs_out: cvbs trimming.1.v5: 0xa0, 0x0
[    0.344109] vout: vout1: register server: cvbs_vout_server
[    0.344115] cvbs_out: register cvbs module server ok
[    0.344121] vout: vout2: register server: cvbs_vout2_server
[    0.344126] cvbs_out: register cvbs module vout2 server ok
[    0.344133] cvbs_out: chrdev devno 264241152 for disp
[    0.344458] cvbs_out: create cdev cvbs
[    0.344471] cvbs_out: cvbsout_probe OK
[    0.453654] SCSI subsystem initialized
[    0.453813] usbcore: registered new interface driver usbfs
[    0.453850] usbcore: registered new interface driver hub
[    0.453915] usbcore: registered new device driver usb
[    0.453988] media: Linux media interface: v0.10
[    0.454013] Linux video capture interface: v2.00
[    0.454087] pps_core: LinuxPPS API ver. 1 registered
[    0.454093] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.454110] PTP clock support registered
[    0.454213] dmi: Firmware registration failed.
[    0.454434] secmon: reserve_mem_size:0x300000
[    0.454502] secmon secmon: assigned reserved memory node linux,secmon
[    0.454671] secmon: get page:ffffffbf00140000, 5000
[    0.454679] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.454685] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.455205] hdmitx: system: amhdmitx_probe start
[    0.455212] hdmitx: system: Ver: 20181019
[    0.455237] hdmitx: system: hdmitx_device.chip_type : 11
[    0.455262] hdmitx: system: not find product desc
[    0.455268] hdmitx: system: not find match pwr-ctl
[    0.455297] hdmitx: system: not find drm_amhdmitx
[    0.455316] hdmitx: system: hpd irq = 41
[    0.455406] hdmitx: system: hdcp22_tx_skp failed to probe
[    0.455412] hdmitx: system: hdcp22_tx_esm failed to probe
[    0.455701] vout: vout1: register server: hdmitx_vout_server
[    0.455709] vout: vout2: register server: hdmitx_vout2_server
[    0.456012] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    0.456027] hdmitx: hdmitx20: Mapped PHY: 0xff634400
[    0.456038] hdmitx: hdmitx20: Mapped PHY: 0xff900000
[    0.456055] hdmitx: hdmitx20: Mapped PHY: 0xff800000
[    0.456061] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
[    0.456066] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    0.456072] hdmitx: hdmitx20: Mapped PHY: 0xff608000
[    0.456078] hdmitx: hdmitx20: Mapped PHY: 0xff600000
[    0.456084] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
[    0.456093] hdmitx: hw: alread display in uboot 0x10
[    0.456116] hdmitx: hw: avmute set to 1
[    0.456174] hdmitx: system: amhdmitx_probe end
[    0.456691] vout: create vout attribute OK
[    0.456798] vout: vout_fops_create OK
[    0.456804] vout: vout1: register server: nulldisp_vout_server
[    0.456828] hdmitx: hdmitx_set_current_vmode[3659]
[    0.456834] hdmitx: system: recalc before custombuilt 60 1
[    0.456840] hdmitx: system: recalc after custombuilt 60 1
[    0.456847] hdmitx: system: get current mode: custombuilt
[    0.456852] hdmitx: system: update rx hdr info 0
[    0.456857] hdmitx: system: update physcial size: 16 9
[    0.456894] hdmitx: video: already init VIC = 0  Now VIC = 130
[    0.456899] hdmitx: video: rx edid only support RGB format
[    0.456905] hdmitx: hw: div40: 0
[    0.463293] hdmitx: system: irq 80000004 0
[    0.483290] hdmitx: system: irq 80000002 0
[    0.490330] hdmitx: ddc w1b error 0x54 0x20 0x00
[    0.490340] hdmitx: this mode doesn't have frac_rate
[    0.490345] hdmitx: frac_rate = 1
[    0.490351] hdmitx: hdmitx: set clk: VIC = 130  cd = 4  cs = 0 frac_rate = 1
[    0.490359] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 148500
[    0.490364] hdmitx: [N2] hpll_clk_out 1485000, od1 1, od2 1, od3 2
[    0.490370] hdmitx: config HPLL = 1485000 frac_rate = 1
[    0.490375] hdmitx: error hpll clk: 1485000
[    0.490381] hdmitx: m1 0x3c, m2 0x3d, m 0x3b00043c
[    0.490437] hdmitx: HPLL: 0xdb00043c
[    0.490442] hdmitx: config HPLL done
[    0.490448] hdmitx: set_hpll_od3_clk_div[610] div = 6
[    0.490456] hdmitx: j = 27  vid_clk_div = 1
[    0.490476] hdmitx: system: irq 80000001 0
[    0.493474] hdmitx: hw:  config hdmitx IP vic = 130 cd:4 cs: 0
[    0.592759] hdmitx: [0x10000104]: 0x00000001
[    0.592770] hdmitx: [0x10000180]: 0x000000ff
[    0.592776] hdmitx: [0x10000181]: 0x000000ff
[    0.592781] hdmitx: [0x10000182]: 0x00000003
[    0.592787] hdmitx: [0x10000183]: 0x00000007
[    0.592793] hdmitx: [0x10000184]: 0x0000003f
[    0.592798] hdmitx: [0x10000185]: 0x00000002
[    0.592804] hdmitx: [0x10000187]: 0x000000ff
[    0.592809] hdmitx: [0x10000188]: 0x00000003
[    0.624415] hdmitx: video: Sink is HDMI device
[    0.624438] hdmitx: hw: set audio
[    0.624445] hdmitx: hw: hdmitx tx_aud_src = 0
[    0.624460] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[    0.624465] hdmitx: hw: aud_n_para = 6144
[    0.624475] hdmitx: hw: set channel status
[    0.624508] vout: init mode custombuilt set ok
[    0.624583] vout: aml_tvout_mode_monitor
[    0.624598] vout: aml_vout_probe OK
[    0.624757] chip type:0x29
[    0.625081] Advanced Linux Sound Architecture Driver Initialized.
[    0.625768] NetLabel: Initializing
[    0.625774] NetLabel:  domain hash size = 128
[    0.625779] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.625811] NetLabel:  unlabeled traffic allowed by default
[    0.626986] clocksource: Switched to clocksource arch_sys_counter
[    0.666146] VFS: Disk quotas dquot_6.6.0
[    0.666199] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.672231] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[    0.672571] NET: Registered protocol family 2
[    0.672917] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.673096] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.673286] TCP: Hash tables configured (established 32768 bind 32768)
[    0.673336] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.673373] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.673508] NET: Registered protocol family 1
[    0.675056] Unpacking initramfs...
[    1.003018] hdmitx: system: plugin
[    1.134268] hdmitx: edid: EDID Parser:
[    1.134280] hdmitx: edid: get dtd0 vic: 16
[    1.134289] hdmitx: edid: get dtd1 vic: 120
[    1.134309] hdmitx: edid: dump_dtd_info[1908]
[    1.134314] hdmitx: edid: pixel_clock: 14850
[    1.134320] hdmitx: edid: h_active: 1920
[    1.134325] hdmitx: edid: h_blank: 280
[    1.134330] hdmitx: edid: v_active: 1080
[    1.134335] hdmitx: edid: v_blank: 45
[    1.134341] hdmitx: edid: h_sync_offset: 88
[    1.134345] hdmitx: edid: h_sync: 44
[    1.134351] hdmitx: edid: v_sync_offset: 16
[    1.134356] hdmitx: edid: v_sync: 20
[    1.134361] hdmitx: edid: find IEEEOUT
[    1.134393] hdmitx: edid: check sum valid
[    1.134398] hdmitx: edid: check sum valid
[    1.134406] hdmitx: edid: update rx hdr info 0 at edid parsing
[    1.134413] hdmitx: edid: check sum valid
[    1.134418] hdmitx: edid: check sum valid
[    1.134425] hdmitx: edid: blk0 raw data
[    1.134464] hdmitx: edid: 
               00ffffffffffff001e6d01000101010101150103801009780aee91a3544c9926
               0f5054a10800714081c08100818095009040a9c0b300023a801871382d40582c
               4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd0039
               3f1f5210000a202020202020000000fc004c472054560a20202020202020017f
               

[    1.134480] hdmitx: edid: blk1 raw data
[    1.134518] hdmitx: edid: 
               020331f14810222005840302012615075009070778030c002000b82d20c00e01
               40001408101810281038104810e3050301023a801871382d40582c0405a05a00
               00001e011d8018711c1620582c2500a05a0000009e011d007251d01e206e2855
               00a05a0000001e263680a070381f4030202500a05a0000001a000000000000ed
               

[    1.134534] hdmitx: system: update physcial size: 160 90
[    1.134539] hdmitx: video: Sink is HDMI device
[    1.134549] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800a6f6a70 (VIC: 130)
[    1.134554] hdmitx: system: get current mode: custombuilt
[    1.134560] hdmitx: system: update rx hdr info 0
[    1.134565] hdmitx: system: update physcial size: 160 90
[    1.134594] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800a6f6a70 (VIC: 130)
[    1.134605] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 130
[    1.134611] hdmitx: system: change to HDMI mode
[    1.134617] hdmitx: hw: set audio
[    1.134622] hdmitx: hw: hdmitx tx_aud_src = 0
[    1.134636] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[    1.134642] hdmitx: hw: aud_n_para = 6144
[    1.134653] hdmitx: hw: set channel status
[    1.136496] Freeing initrd memory: 12632K
[    1.139737] hw perfevents: clusterb_enabled = 1
[    1.139746] hw perfevents: cpumasks 0x3, 0x3c
[    1.139770] hw perfevents: cluster A irq = 18
[    1.139795] hw perfevents: cluster B irq = 19
[    1.139843] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.141343] audit: initializing netlink subsys (disabled)
[    1.141384] audit: type=2000 audit(1.092:1): initialized
[    1.141904] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.147522] Registering sdcardfs 0.1
[    1.148254] SELinux:  Registering netfilter hooks
[    1.150612] NET: Registered protocol family 38
[    1.150625] Key type asymmetric registered
[    1.150632] Asymmetric key parser 'x509' registered
[    1.150755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.150763] io scheduler noop registered (default)
[    1.150769] io scheduler deadline registered
[    1.150858] io scheduler cfq registered
[    1.151191] pwm-gpio pwmgpio: 1 gpio pwms loaded
[    1.151801] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
[    1.152005] meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl
[    1.152503] random: fast init done
[    1.152534] random: crng init done
[    1.152706] gpiomem-aml ff634000.gpiomem: Initialised: Registers at 0xff634000
[    1.152777] [drm] Initialized
[    1.152827] mali ffe40000.bifrost: Continuing without Mali regulator control
[    1.152878] mali ffe40000.bifrost: max pp is 2
[    1.152886] mali ffe40000.bifrost: set min pp to default 1
[    1.152892] mali ffe40000.bifrost: min pp is 1
[    1.152899] mali ffe40000.bifrost: min clk  is 4
[    1.152913] mali ffe40000.bifrost: hiu io source  0xffffff80084d9000
[    1.152923] mali ffe40000.bifrost: hiu io source  0xffffff80084db000
[    1.152929] mali ffe40000.bifrost: num of pp used most of time 1
[    1.152935] mali ffe40000.bifrost: clock dvfs cfg table size is 6
[    1.152957] mali ffe40000.bifrost: max clk set 4
[    1.152962] mali ffe40000.bifrost: max clk  is 4
[    1.152969] mali ffe40000.bifrost: turbo clk set to 5
[    1.152974] mali ffe40000.bifrost: turbo clk  is 5
[    1.152980] mali ffe40000.bifrost: default clk set to 4
[    1.152986] mali ffe40000.bifrost: default clk  is 4
[    1.152994] mali ffe40000.bifrost: ====================0====================
               clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[    1.153005] mali ffe40000.bifrost: ====================1====================
               clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[    1.153015] mali ffe40000.bifrost: ====================2====================
               clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[    1.153024] mali ffe40000.bifrost: ====================3====================
               clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[    1.153033] mali ffe40000.bifrost: ====================4====================
               clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    1.153042] mali ffe40000.bifrost: ====================5====================
               clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    1.153049] mali ffe40000.bifrost: clock dvfs table size is 6
[    1.153123] mali_plat=ffffff800a67d6d8
[    1.153213] meson_gcooldev is null, no set min status
[    1.153220] gpu cooling register okay with err=0
[    1.153265] meson_gcooldev is null, no set min status
[    1.153270] gpu core cooling register okay with err=0
[    1.153293] shader_present=3, tiler_present=1, l2_present=1
[    1.153381] Mali_pwr_on:gpu_irq : 200
[    1.153581] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
[    1.153880] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
[    1.154576] mali ffe40000.bifrost: Probed as mali0
[    1.154811] Unable to detect cache hierarchy for CPU 0
[    1.157997] loop: module loaded
[    1.158262] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.158557] libphy: Fixed MDIO Bus: probed
[    1.159109]  REG0:Addr = ffffff80084f1540
[    1.159121] Not set  cali_val for REG1
[    1.159384] meson6-dwmac ff3f0000.ethernet: no reset control found
[    1.159392] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.159397]  Ring mode enabled
[    1.159402]  DMA HW capability register supported
[    1.159407]  Normal descriptors
[    1.159412]  RX Checksum Offload Engine supported
[    1.159416] 	COE Type 2
[    1.159421]  TX Checksum insertion supported
[    1.159425]  Wake-Up On Lan supported
[    1.159454] eth%d: device MAC address 00:1e:06:42:29:b5
[    1.159459]  Enable RX Mitigation via HW Watchdog Timer
[    1.165672] libphy: stmmac: probed
[    1.165685] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    1.165691] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    1.166727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.166735] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.167059] usbcore: registered new interface driver cdc_acm
[    1.167065] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.167097] usbcore: registered new interface driver uas
[    1.167136] usbcore: registered new interface driver usb-storage
[    1.167199] usbcore: registered new interface driver usbserial
[    1.167231] usbcore: registered new interface driver usbserial_generic
[    1.167254] usbserial: USB Serial support registered for generic
[    1.167499] mousedev: PS/2 mouse device common for all mice
[    1.167676] i2c /dev entries driver
[    1.167746] IR IRMP decoder handler initialized
[    1.169438] lirc_helper: wakeupkey 0xffffffff, protocol 0x1
[    1.170561] ledtrig-cpu: registered to indicate activity on CPUs
[    1.170790] hidraw: raw HID events driver (C) Jiri Kosina
[    1.170959] usbcore: registered new interface driver usbhid
[    1.170965] usbhid: USB HID core driver
[    1.171339] value of voltage_tolerance 0
[    1.171888] dvfs [meson_cpufreq_init] - cluster 0 freq 1992000
[    1.171902] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[    1.172718] value of voltage_tolerance 0
[    1.173316] dvfs [meson_cpufreq_init] - cluster 1 freq 1908000
[    1.173322] dvfs [meson_cpufreq_init] - cluster 1 freq 2004000
[    1.173344] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
[    1.173364] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    1.175208] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    1.176952] ff803000.serial: clock gate not found
[    1.176977] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80084f7000
[    1.176999] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 33, base_baud = 1500000) is a meson_uart
[    1.177009] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    3.766978] console [ttyS0] enabled
[    3.771123] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80084f9000
[    3.781598] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80084fd080
[    3.793203] gpio-keypad ff800000.gpio_keypad: failed to get gpio index from dts
[    3.799736] gpio-keypad: probe of ff800000.gpio_keypad failed with error -22
[    3.807065] efusekeynum: 1
[    3.809790] efusekeyname:            uuid	offset:     0	size:    32
[    3.816287] efuse efuse: probe OK!
[    3.820480] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[    3.827162] ge2d: ge2d_init_module
[    3.830574] ge2d: ge2d_dev major:236
[    3.834330] ge2d: clock source clk_ge2d_gate ffffffc0c7583840
[    3.840135] ge2d: clock clk_ge2d source ffffffc0c75838c0
[    3.845584] ge2d: clock source clk_vapb_0 ffffffc0c7583940
[    3.851244] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
[    3.858457] ge2d: ge2d clock is 499 MHZ
[    3.862396] ge2d: find address resource
[    3.866381] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008690000
[    3.874178] ge2d: reserved mem init failed
[    3.878424] ge2d: ge2d: pdev=ffffffc0ca214800, irq=45, clk=ffffffc0c7583840
[    3.885545] ge2d: ge2d start monitor
[    3.889286] ge2d: ge2d workqueue monitor start
[    3.889480] amvideom vsync irq: 46
[    3.889782] amvideocap_probe,amvideocap
[    3.889783] use cma buf.
[    3.889870] fb: osd_init_module
[    3.890006] fb: viu vsync irq: 46
[    3.890011] fb: viu2 vsync irq: 55
[    3.890054] 0x000000d8:Y=d8,U=0,V=0
[    3.890055] 0x000000d9:Y=d9,U=0,V=0
[    3.890056] 0x000000da:Y=da,U=0,V=0
[    3.890056] 0x000000db:Y=db,U=0,V=0
[    3.893940] fb: osd_rdma_init: rdma_table p=0xcf608000,op=0xcf608000 , v=0xffffff800862f000
[    3.893954] rdma_register, rdma_table_addr ffffff8008631000 rdma_table_addr_phy cf609000 reg_buf ffffffc0ca1b0000
[    3.893956] rdma_register success, handle 2 table_size 4096
[    3.893957] fb: osd_rdma_init:osd rdma handle = 2.
[    3.893963] fb: mem_size: 0x800000
[    3.893963] fb: mem_size: 0x4b80000
[    3.893964] fb: mem_size: 0x100000
[    3.893965] fb: mem_size: 0x100000
[    3.893965] fb: mem_size: 0x800000
[    3.893998] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[    3.893999] fb: reserved memory base:0x000000007f800000, size:800000
[    3.894064] fb: fb def : 1920 1080 1920 2160 32
[    3.894065] fb: init fbdev bpp is:32
[    3.998379] fb: malloc_osd_memory, cma:ffffff800a8579c8
[    3.998381] fb: malloc_osd_memory, 1288, base:0x000000007f800000, size:8388608
[    3.998400] fb: use ion buffer for fb memory, fb_index=0
[    4.021994] meson-fb meson-fb: create ion_client ffffffc0ca2ca900, handle=ffffffc0ca37ea00
[    4.021997] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
[    4.022000] fb: Frame buffer memory assigned at
[    4.022001] fb:  0, phy: 0x00000000e5800000, vir:0xffffff800a8f4000, size=77312K

[    4.022002] fb: logo_index=0,fb_index=0
[    4.022004] fb: ---------------clear fb0 memory ffffff800a8f4000
[    4.048795] fb: osd[0] canvas.idx =0x40
[    4.048796] fb: osd[0] canvas.addr=0xe5800000
[    4.048796] fb: osd[0] canvas.width=7680
[    4.048797] fb: osd[0] canvas.height=1080
[    4.048798] fb: osd[0] frame.width=1920
[    4.048799] fb: osd[0] frame.height=1080
[    4.048799] fb: osd[0] out_addr_id =0x1
[    4.093590] Console: switching to colour frame buffer device 240x67
[    4.221183] fb: osd[0] enable: 1 (swapper/0)
[    4.238549] fb: set osd0 reverse as NONE
[    4.255136] fb: osd probe OK
[    4.255262] hdmitx: hdcp: hdmitx_hdcp_init
[    4.257072] vout: vout2: create vout2 attribute OK
[    4.261807] vout: vout2: vout2_fops_create OK
[    4.266241] vout: vout2: register server: nulldisp_vout2_server
[    4.272318] vout: vout2: init mode null set ok
[    4.277007] vout: vout2: clktree_init
[    4.280764] vout: vout2: aml_vout2_probe OK
[    4.285095] DI: di_module_init ok.
[    4.288603] DI: di_module_init: major 509
[    4.292924] deinterlace deinterlace: assigned reserved memory node linux,di_cma
[    4.300219] DI: CMA size 0x2800000.
[    4.303861] pre_irq:70
[    4.306363] post_irq:71
[    4.308966] DI: di_probe allocate rdma channel 0.
[    4.313819] di_get_vpu_clkb: get clk vpu error.
[    4.318499] DI: vpu clkb <334000000, 667000000>
[    4.323195] DI:enable vpu clkb.
[    4.326471] 0x000000dc:Y=dc,U=0,V=0
[    4.330115] 0x000000dd:Y=dd,U=0,V=0
[    4.333751] 0x000000de:Y=de,U=0,V=0
[    4.337392] 0x000000df:Y=df,U=0,V=0
[    4.341030] 0x000000e0:Y=e0,U=0,V=0
[    4.344671] 0x000000e1:Y=e1,U=0,V=0
[    4.348310] 0x000000e2:Y=e2,U=0,V=0
[    4.351950] 0x000000e3:Y=e3,U=0,V=0
[    4.355589] 0x000000f0:Y=f0,U=0,V=0
[    4.359230] 0x000000f1:Y=f1,U=0,V=0
[    4.362868] 0x000000f2:Y=f2,U=0,V=0
[    4.366510] 0x000000f3:Y=f3,U=0,V=0
[    4.370149] 0x000000f4:Y=f4,U=0,V=0
[    4.373790] 0x000000f5:Y=f5,U=0,V=0
[    4.377429] 0x000000f6:Y=f6,U=0,V=0
[    4.381069] 0x000000f7:Y=f7,U=0,V=0
[    4.384713] 0x000000f8:Y=f8,U=0,V=0
[    4.388350] 0x000000f9:Y=f9,U=0,V=0
[    4.391990] 0x000000fa:Y=fa,U=0,V=0
[    4.395629] 0x000000fb:Y=fb,U=0,V=0
[    4.399269] 0x000000fc:Y=fc,U=0,V=0
[    4.402906] 0x000000fd:Y=fd,U=0,V=0
[    4.406550] 0x000000fe:Y=fe,U=0,V=0
[    4.410189] 0x000000ff:Y=ff,U=0,V=0
[    4.413830] 0x0000003a:Y=3a,U=0,V=0
[    4.417469] DI: support multi decoding 254~255~58.
[    4.422491] DI: di_probe:Di use HRTIMER
[    4.426447] di_probe:ok
[    4.429034] vdin_drv_init: major 508
[    4.432816] vdin_drv_init: vdin driver init done
[    4.437493] [viuin..]viuin_init_module viuin module init
[    4.443063] [viuin..]viuin_probe probe ok.
[    4.447384] [RX]-hdmirx: hdmirx_init.
[    4.451014] ESM HLD: Initializing...
[    4.454794] tvin_afe: tvafe_drv_init: major 506
[    4.459542] tvin_afe: tvafe_drv_init.
[    4.463299] tvafe_vbi: vbi: vbi_init.
[    4.467111] amlvid:info: amlvideo_init called
[    4.471379] amlvid:info: amlvideo_create_instance called
[    4.476841] amlvid:info: v4l2_dev.name=:amlvideo-000
[    4.482012] amlvideo-000: V4L2 device registered as video10
[    4.487676] amlvid:info: amlvideo_create_instance called
[    4.493135] amlvid:info: v4l2_dev.name=:amlvideo-001
[    4.498290] amlvideo-001: V4L2 device registered as video23
[    4.504026] PPMGRDRV: warn: ppmgr module init func called
[    4.509561] PPMGRDRV: err: ppmgr_driver_probe called
[    4.514663] Reserved memory: failed to init DMA memory pool at 0x00000000ed800000, size 0 MiB
[    4.523298] PPMGRDRV: info: ppmgr_dev major:504
[    4.528221] ionvideo-000: V4L2 device registered as video13
[    4.533745] ionvideo-001: V4L2 device registered as video14
[    4.539460] ionvideo-002: V4L2 device registered as video15
[    4.545184] ionvideo-003: V4L2 device registered as video16
[    4.550899] ionvideo-004: V4L2 device registered as video17
[    4.556624] ionvideo-005: V4L2 device registered as video18
[    4.562340] ionvideo-006: V4L2 device registered as video19
[    4.568063] ionvideo-007: V4L2 device registered as video20
[    4.573779] ionvideo-008: V4L2 device registered as video21
[    4.579455] ionvid: info: Video Technology Magazine Ion Video
[    4.585348] ionvid: info: Capture Board ver 1.0 successfully loaded
[    4.591914] videosync_create_instance dev_s ffffffc0ca38f400,dev_s->dev ffffffc0ca340e80
[    4.599997] videosync_create_instance reg videosync.0
[    4.605226] aml_vecm_init:module init
[    4.605228] videosync_thread started
[    4.612807] 
                VECM probe start
[    4.617616] Can't find  wb_sel.
[    4.620795] hdr:Can't find  cfg_en_osd_100.
[    4.625127] Can't find  tx_op_color_primary.
[    4.629547] amlogic, vecm
[    4.632145] vlock dt support: 1
[    4.635442] vlock dt new_fsm: 0
[    4.638726] vlock dt hwver: 0
[    4.641853] vlock dt phlock_en: 0
[    4.645321] Can't find  vlock_en.
[    4.648784] Can't find  vlock_mode.
[    4.652424] Can't find  vlock_pll_m_limit.
[    4.656673] Can't find  vlock_line_limit.
[    4.660833] param_config vlock_en:1
[    4.664491] vlock_status_init vlock_en:0
[    4.668561] aml_vecm_probe: ok
[    4.671822] reg base = ffffff8008639000
[    4.676126] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    4.684209] meson-mmc: >>>>>>>>hostbase ffffff8008685000, dmode 
[    4.690028] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    4.695593] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[    4.738996] meson-mmc: meson_mmc_probe() : success!
[    4.744915] meson-mmc: >>>>>>>>hostbase ffffff800868e000, dmode 
[    4.748111] meson-mmc: gpio_cd = 1ca
[    4.791000] meson-mmc: meson_mmc_probe() : success!
[    4.792283] amlogic mtd driver init
[    4.795900] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25
               
[    4.803194] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
[    4.808947] cectx ff80023c.aocec: cecb_ver:0x1
[    4.813526] cectx ff80023c.aocec: line_reg:0x1
[    4.818239] cectx ff80023c.aocec: line_bit:0x3
[    4.822717] cectx ff80023c.aocec: ee_to_ao:0x1
[    4.827398] input: cec_input as /devices/virtual/input/input0
[    4.833314] cectx ff80023c.aocec: not find 'port_num'
[    4.838426] cectx ff80023c.aocec: using cec:1
[    4.842913] cectx ff80023c.aocec: no hdmirx regs
[    4.847686] cectx ff80023c.aocec: no hhi regs
[    4.852179] cectx ff80023c.aocec: not find 'output'
[    4.858657] cectx ff80023c.aocec: irq cnt:2
[    4.861647] cectx ff80023c.aocec: wakeup_reason:0x0
[    4.866605] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[    4.872110] cectx ff80023c.aocec: aml_cec_probe success end
[    4.878015] unifykey: storage in base: 0xffffffc005000000
[    4.883376] unifykey: storage out base: 0xffffffc005040000
[    4.889010] unifykey: storage block base: 0xffffffc005080000
[    4.894813] unifykey: probe done!
[    4.898458] unifykey: aml_unifykeys_init done!
[    4.902902] meson ts init
[    4.905671] tsensor id: 0
[    4.908487] tsensor trim info: 0xfa008005!
[    4.912668] tsensor hireboot: 0xc0ff2a80
[    4.916773] meson ts init
[    4.919543] tsensor id: 1
[    4.922322] tsensor trim info: 0xfa00800e!
[    4.926535] tsensor hireboot: 0xc0ff2a80
[    4.930666] audio_dsp: [dsp]register dsp to char divece(257)
[    4.936510] amaudio: amaudio: driver amaudio init!
[    4.941560] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[    4.948219] sysled: module init
[    4.951389] meson_wdt ffd0f0d0.watchdog: start watchdog
[    4.956691] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    4.963518] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    4.970454] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
[    4.977782] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
[    4.985882] dmc_monitor_probe
[    4.988897] defendkey ff630218.defendkey: Reserved memory is not enough!
[    4.995375] defendkey: probe of ff630218.defendkey failed with error -22
[    5.002520] usbcore: registered new interface driver snd-usb-audio
[    5.009089] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[    5.015344] T9015 acodec used by auge, tdmout:2
[    5.015348] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
[    5.015350] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[    5.015351] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[    5.015354] meson-mmc: Data 1 aligned delay is 0
[    5.015356] meson-mmc: emmc: clk 199999997 tuning start
[    5.053639] Error: Driver 'spdif-dit' is already registered, aborting...
[    5.059889] asoc debug: aml_audio_controller_probe-116
[    5.065603] meson-mmc: emmc: rx_tuning_result[0] = 40
[    5.065859] asoc-aml-card auge_sound: aml_card_probe, parse error -517
[    5.065860] aml_card_probe error ret:-517
[    5.065993] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
[    5.066001] TDM id 2 i2s2hdmi:0
[    5.066005] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 1, lane_oe_mask_out = 0
[    5.066138] snd_tdm ff642000.audiobus:tdmc: aml_tdm_get_pins error!
[    5.066140] No channel mask node Channel_Mask
[    5.066392] aml_spdif_platform_probe, spdif ID = 0
[    5.066550] SPDIF id 0 asrc_id:0 auto_asrc:0
[    5.066607] spdifout_play_with_zerodata, spdif id:0 enable:0
[    5.066609] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
[    5.066613] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[    5.066616] hdmitx: audio: aout notify format CT_PCM
[    5.066618] hdmitx: hw: set audio
[    5.066619] hdmitx: hw: hdmitx tx_aud_src = 0
[    5.066630] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
[    5.066632] hdmitx: hw: aud_n_para = 6144
[    5.066638] hdmitx: hw: set channel status
[    5.066665] hdmitx: audio: Audio Type: PCM
[    5.066667] hdmitx: audio: set audio param
[    5.066669] spdif_a is set to enable
[    5.066673] aml_spdif_platform_probe, register soc platform
[    5.066687] aml_spdif_platform_probe, spdif ID = 1
[    5.066724] spdifout_play_with_zerodata, spdif id:1 enable:0
[    5.066726] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
[    5.066728] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[    5.066731] spdif_b is set to enable
[    5.066735] aml_spdif_platform_probe, register soc platform
[    5.067009] audio_ddr_mngr: 0, irqs toddr 34, frddr 37
[    5.067010] audio_ddr_mngr: 1, irqs toddr 35, frddr 38
[    5.067011] audio_ddr_mngr: 2, irqs toddr 36, frddr 39
[    5.067119] audiolocker_platform_probe
[    5.067735] Register vad
[    5.067864] Netfilter messages via NETLINK v0.30.
[    5.067924] Initializing XFRM netlink socket
[    5.067932] NET: Registered protocol family 17
[    5.067947] Key type dns_resolver registered
[    5.068426] Registered swp emulation handler
[    5.070138] Registered cp15_barrier emulation handler
[    5.070147] Registered setend emulation handler
[    5.070388] registered taskstats version 1
[    5.214850] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    5.222770] meson-mmc: emmc: rx_tuning_result[2] = 40
[    5.227957] meson-mmc: emmc: rx_tuning_result[3] = 40
[    5.233163] meson-mmc: emmc: rx_tuning_result[4] = 40
[    5.237495] meson-mmc: emmc: best_win_start =2, best_win_size =4
[    5.243654] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
[    5.252235] emmc: new HS200 MMC card at address 0001
[    5.257177] emmc: clock 199999997, 8-bit-bus-width
                
[    5.262475] mmcblk0: emmc:0001 CJTD4R 58.2 GiB 
[    5.266970] mmcblk0boot0: emmc:0001 CJTD4R partition 1 4.00 MiB
[    5.273029] mmcblk0boot1: emmc:0001 CJTD4R partition 2 4.00 MiB
[    5.275039] aml_dai_spdif_probe
[    5.275043] aml_dai_spdif_probe
[    5.275051] set normal 512 fs /4 fs
[    5.275073] 	 set spdifout clk:6144000, mpll:24576000
[    5.275075] 	 get spdifout clk:6143997, mpll:24575987
[    5.275080] aml_dai_set_spdif_fmt , fmt 0x4010
[    5.275122] aml_spdif_new spdif_b, clk continuous:1
[    5.275124] spdifout_play_with_zerodata_free, spdif id:1
[    5.279135] asoc-aml-card auge_sound: dit-hifi <-> SPDIF-B mapping ok
[    5.279145] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
[    5.279147] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[    5.279148] 	lanes_out_cnt(1), lanes_in_cnt(1)
[    5.279149] 	lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[    5.279149] 	lanes_lb_cnt(0)
[    5.279150] 	slots(2), slot_width(32)
[    5.279156] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0ca2e8718, id(2), clksel(2)
[    5.279159] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    5.279399] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-C mapping ok
[    5.279400] set normal 512 fs /4 fs
[    5.279410] 	 set spdifout clk:6144000, mpll:24576000
[    5.279411] 	 get spdifout clk:6143997, mpll:24575987
[    5.279412] aml_dai_set_spdif_fmt , fmt 0x4010
[    5.279441] aml_spdif_new spdif_a, clk continuous:1
[    5.279442] spdifout_play_with_zerodata_free, spdif id:0
[    5.279570] asoc-aml-card auge_sound: dit-hifi <-> SPDIF mapping ok
[    5.280006] snd_card_add_kcontrols card:ffffffc0c77cd018
[    5.280012] effect_v2 is not init
[    5.280013] Not init vad
[    5.280014] Failed to add VAD controls
[    5.280023] eq/drc v1 function enable
[    5.307025] add line-out mute controls
[    5.307378] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    5.309967] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.309975] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    5.310144] usb: xhci: determined sg_tablesize: 4294967295
[    5.310144] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
[    5.310164] xhci-hcd xhci-hcd.0.auto: irq 23, io mem 0xff500000
[    5.310226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.310229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.310230] usb usb1: Product: xHCI Host Controller
[    5.310232] usb usb1: Manufacturer: Linux 4.9.213-67 xhci-hcd
[    5.310233] usb usb1: SerialNumber: xhci-hcd.0.auto
[    5.310436] hub 1-0:1.0: USB hub found
[    5.310448] hub 1-0:1.0: 2 ports detected
[    5.310574] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.310579] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    5.310605] usb: xhci: determined sg_tablesize: 4294967295
[    5.310605] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.310639] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    5.310641] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.310643] usb usb2: Product: xHCI Host Controller
[    5.310644] usb usb2: Manufacturer: Linux 4.9.213-67 xhci-hcd
[    5.310646] usb usb2: SerialNumber: xhci-hcd.0.auto
[    5.310815] hub 2-0:1.0: USB hub found
[    5.310824] hub 2-0:1.0: 1 port detected
[    5.311067] hctosys: unable to open rtc device (rtc0)
[    5.311237] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0ca228000)
[    5.311252] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    5.311258] dwc_otg ff400000.dwc2_a: base=0xffffff8008d00000
[    5.311260] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0ca2c8400
[    5.411383] dwc_otg: Core Release: 3.30a
[    5.411385] dwc_otg: Setting default values for core params
[    5.411392] dwc_otg: curmode: 0, host_only: 0
[    5.411402] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[    5.423526] dwc_otg: Using Buffer DMA mode
[    5.423527] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    5.423529] dwc_otg: Working on port type = SLAVE
[    5.423531] dwc_otg: Dedicated Tx FIFOs mode
[    5.424835] meson_cdev probe
[    5.424876] meson_cdev index: 0
[    5.424954] meson_cdev index: 1
[    5.424999] thermal: no cluster id, cpucore as one cooldev
[    5.425011] meson_cdev index: 2
[    5.425013] cpucore_cooling_register, max_cpu_core_num:6
[    5.425015] cpucore_cooling_register, clutser[1] core num:4
[    5.425016] cpucore_cooling_register, clutser[0] core num:2
[    5.425064] meson_cdev index: 3
[    5.425076] meson_cdev index: 4
[    5.425099] find tzd id: 0
[    5.425197] find tzd id: 0
[    5.425276] find tzd id: 0
[    5.425318] meson_cdev probe done
[    5.425375] gxbb_pm: enter meson_pm_probe!
[    5.425387] gxbb_pm: meson_pm_probe done
[    5.425554] ALSA device list:
[    5.425555]   #0: AML-AUGESOUND
[    5.578999] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(0) tuning for host cf(xhci_hub_control)--
[    5.603289] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    5.603887] mmcblk0rpmb: emmc:0001 CJTD4R partition 3 4.00 MiB
[    5.612184]  mmcblk0: p1 p2
[    5.613442] Freeing unused kernel memory: 4864K
[    5.635025] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    5.781358] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    5.782593] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.790315] usb 1-1: Product: USB2.1 Hub
[    5.794002] usb 1-1: Manufacturer: GenesysLogic
[    5.823211] hub 1-1:1.0: USB hub found
[    5.823652] hub 1-1:1.0: 4 ports detected
[    5.899127] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.921596] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620
[    5.922831] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.930143] usb 2-1: Product: USB3.1 Hub
[    5.934193] usb 2-1: Manufacturer: GenesysLogic
[    5.950921] hub 2-1:1.0: USB hub found
[    5.951248] hub 2-1:1.0: 4 ports detected
[    6.892240] usb 2-1.4: new SuperSpeed USB device number 3 using xhci-hcd
[    6.995861] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0813
[    6.995864] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.995866] usb 2-1.4: Product: USB3.0 Hub
[    6.995869] usb 2-1.4: Manufacturer: VIA Labs, Inc.
[    7.007015] hub 2-1.4:1.0: USB hub found
[    7.007317] hub 2-1.4:1.0: 4 ports detected
[    7.331452] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    7.510128] systemd[1]: System time before build time, advancing clock.
[    7.569441] NET: Registered protocol family 10
[    7.574896] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.578128] cgroup: cgroup2: unknown option "nsdelegate"
[    7.587257] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.603859] systemd[1]: Detected architecture arm64.
[    7.627518] systemd[1]: Set hostname to <odroid>.
[    7.753031] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    7.764692] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    7.883966] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.903072] systemd[1]: Reached target Swap.
[    7.915097] systemd[1]: Reached target Remote File Systems.
[    7.931684] systemd[1]: Created slice System Slice.
[    7.947568] systemd[1]: Listening on Journal Audit Socket.
[    7.971378] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[    8.030850] register clk_set_setting cpu[41]
[    8.032786] Registered firmware driver success.
[    8.034937] Try to load video/h264_multi.bin  ...
[    8.040477] firmware_codec firmware_vdec: Direct firmware load for video/h264_multi.bin failed with error -2
[    8.049202] Error : -2 can't load the video/h264_multi.bin.
[    8.051252] usb 2-1.2: new SuperSpeed USB device number 4 using xhci-hcd
[    8.061738] get data from fsys fail.
[    8.065451] invaild file type.
[    8.068900] Try to load video/h264.bin  ...
[    8.073016] firmware_codec firmware_vdec: Direct firmware load for video/h264.bin failed with error -2
[    8.076729] usb 2-1.2: New USB device found, idVendor=8564, idProduct=1000
[    8.076733] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.076735] usb 2-1.2: Product: Mass Storage Device
[    8.076738] usb 2-1.2: Manufacturer: JetFlash
[    8.076740] usb 2-1.2: SerialNumber: 6YAI653XE6TFQK87
[    8.090530] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    8.090827] scsi host0: usb-storage 2-1.2:1.0
[    8.122569] Error : -2 can't load the video/h264.bin.
[    8.127762] get data from fsys fail.
[    8.127765] invaild file type.
[    8.128010] Try to load video/h265.bin  ...
[    8.128043] firmware_codec firmware_vdec: Direct firmware load for video/h265.bin failed with error -2
[    8.128045] Error : -2 can't load the video/h265.bin.
[    8.128045] get data from fsys fail.
[    8.128046] invaild file type.
[    8.128285] Try to load video/h264_enc.bin  ...
[    8.129139] load firmware size : 76288, Name : video/h264_enc.bin.
[    8.129147] start to parse fw package.
[    8.129150] the package has 0 fws totally.
[    8.129152] the fw pack ver v0.0.0 is too lower.
[    8.129152] it may work abnormally so need to be update in time.
[    8.129531] Try to load video/video_ucode.bin  ...
[    8.135926] load firmware size : 768768, Name : video/video_ucode.bin.
[    8.135972] start to parse fw package.
[    8.135975] the package has 35 fws totally.
[    8.136102] the fw gxl_h264_multi.bin is not match.
[    8.136248] the fw gxl_vp9.bin is not match.
[    8.136333] the fw gxl_avs.bin is not match.
[    8.136513] the fw gxl_hevc.bin is not match.
[    8.136578] the fw gxl_vc1.bin is not match.
[    8.136678] the fw gxl_h264.bin is not match.
[    8.137238] the fw gxl_h264_mvc.bin is not match.
[    8.148811] Amlogic A/V streaming port init
[    8.149580] get gate demux control ok ffffffc0c9de1480
[    8.149587] get gate parser_top control ok ffffffc0c9de1a80
[    8.149608] get gate vdec control ok ffffffc0c9d6ec80
[    8.149611] get gate clk_81 control failed           (null)
[    8.149634] get gate clk_vdec_mux control ok ffffffc0c9d6e7c0
[    8.149660] get gate clk_hcodec_mux control ok ffffffc0c9d6e680
[    8.149690] get gate clk_hevc_mux control ok ffffffc0c9d6e480
[    8.149723] get gate clk_hevcb_mux control ok ffffffc0c9d6eb00
[    8.149739] get gate ahbarb0 control ok ffffffc0c9d6e740
[    8.149741] get gate asyncfifo control failed           (null)
[    8.151531] amvdec_avs module init
[    8.153329] amvdec_h264 module init
[    8.157583] ammvdec_h264 module init
[    8.162825] amvdec_h265 module init
[    8.168493] amvdec_mmpeg4 module init
[    8.170675] amvdec_vc1 module init
[    8.173954] amvdec_vp9 module init
[    8.533458] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    8.808074] systemd-journald[2096]: Received request to flush runtime journal from PID 1
[    8.811098] systemd-journald[2096]: File /var/log/journal/e00bd6223a7245d0aa6e19e0ab12a024/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    9.051424] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[    9.055879] usb 1-1-port3: attempt power cycle
[    9.068785] Registered IR keymap rc-empty
[    9.068902] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input1
[    9.068993] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
[    9.073862] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011
[    9.073870] meson-ir ff808040.meson-ir: receiver initialized
[    9.084216] lirc_dev: IR Remote Control driver registered, major 499
[    9.085763] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[    9.085769] IR LIRC bridge handler initialized
[    9.163573] ionvid: dbg: ionvideo open
[    9.163574] ionvid: dbg: ionvideo open
[    9.163673] ionvid: dbg: vidioc_close!!!!
[    9.163674] ionvid: dbg: vidioc_close!!!!
[    9.163680] ionvid: dbg: vidioc_close
[    9.163681] ionvid: dbg: vidioc_close
[    9.164586] ionvid: dbg: ionvideo open
[    9.164667] ionvid: dbg: ionvideo open
[    9.164705] ionvid: dbg: vidioc_close!!!!
[    9.164711] ionvid: dbg: vidioc_close
[    9.164869] ionvid: dbg: vidioc_close!!!!
[    9.164885] ionvid: dbg: vidioc_close
[    9.164994] ionvid: dbg: ionvideo open
[    9.165367] ionvid: dbg: ionvideo open
[    9.165467] ionvid: dbg: vidioc_close!!!!
[    9.165473] ionvid: dbg: vidioc_close
[    9.166100] ionvid: dbg: ionvideo open
[    9.166219] ionvid: dbg: ionvideo open
[    9.166248] ionvid: dbg: vidioc_close!!!!
[    9.166255] ionvid: dbg: vidioc_close
[    9.166603] ionvid: dbg: vidioc_close!!!!
[    9.166619] ionvid: dbg: vidioc_close
[    9.168521] ionvid: dbg: vidioc_close!!!!
[    9.168532] ionvid: dbg: vidioc_close
[    9.169547] ionvid: dbg: ionvideo open
[    9.169751] ionvid: dbg: vidioc_close!!!!
[    9.169759] ionvid: dbg: vidioc_close
[    9.179127] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[    9.186106] rtc-pcf8563 3-0051: rtc core: registered rtc-pcf8563 as rtc0
[    9.229984] Fine tdm clk setting range (0~2000000), 12287994
[    9.230233] Fine spdif sysclk setting range(0~2000000), 6143997
[    9.239763] out of value, fixed it
[    9.239797] id=0 set inskew=0
[    9.239970] AED req_sel0 module:TDMOUT_B
[    9.240066] spk_mute_set: mute flag = 0
[    9.313897] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[    9.448720] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[    9.513165] scsi 0:0:0:0: Direct-Access     JetFlash Transcend 64GB   1100 PQ: 0 ANSI: 6
[    9.518219] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.519695] sd 0:0:0:0: [sda] 123404288 512-byte logical blocks: (63.2 GB/58.8 GiB)
[    9.520404] sd 0:0:0:0: [sda] Write Protect is off
[    9.520411] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.521078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.527149]  sda: sda1
[    9.529993] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    9.583392] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   10.355362] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[   11.327356] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?
[   11.328536] usb 1-1.3: the parent's name is 1-1
[   11.328563] usb 1-1-port3: Device no response
[   11.333072] usb 1-1-port3: unable to enumerate USB device
[   11.370996] vout: aml_tvout_mode_work: monitor_timeout
[   11.443001] usb 1-1.4: new high-speed USB device number 8 using xhci-hcd
[   11.547024] usb 1-1.4: device descriptor read/64, error -71
[   11.785312] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2813
[   11.785317] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   11.785319] usb 1-1.4: Product: USB2.0 Hub
[   11.785321] usb 1-1.4: Manufacturer: VIA Labs, Inc.
[   11.806862] hub 1-1.4:1.0: USB hub found
[   11.807688] hub 1-1.4:1.0: 4 ports detected
[   13.753158] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.251037] usb 1-1.4.2: new full-speed USB device number 9 using xhci-hcd
[   14.365859] usb 1-1.4.2: New USB device found, idVendor=4147, idProduct=2800
[   14.365865] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   14.365868] usb 1-1.4.2: Product: 2.4G Composite Devic
[   14.401806] input: 2.4G Composite Devic as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/0003:4147:2800.0001/input/input2
[   14.461150] hid-generic 0003:4147:2800.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-xhci-hcd.0.auto-1.4.2/input0
[   14.465051] input: 2.4G Composite Devic as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:4147:2800.0002/input/input3
[   14.526053] hid-generic 0003:4147:2800.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-xhci-hcd.0.auto-1.4.2/input1
[   14.787183] Fine tdm clk setting range (0~2000000), 12287994
[   14.787438] Fine spdif sysclk setting range(0~2000000), 6143997
[   14.793669] out of value, fixed it
[   14.797066] id=0 set inskew=0
[   14.797151] AED req_sel0 module:TDMOUT_B
[   14.797193] spk_mute_set: mute flag = 0
[   14.957882] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   15.258002] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.343097] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[   15.343399] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.498402] fb: osd[0] enable: 0 (Xorg)
[   16.034726] fb: osd[0] enable: 1 (Xorg)
[   17.137291] fuse init (API version 7.26)
[   19.435224] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   19.435243] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.218573] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   23.353368] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   23.488136] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   23.622870] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   24.818964] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[   37.264699] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   37.399709] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   37.534383] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   37.669177] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   51.312964] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   51.447638] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   51.582249] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   51.716619] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   64.522988] fb: mem_free_work, free memory: addr:800000
[   65.371111] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   65.507006] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   65.641678] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   65.776475] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   79.425172] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   79.559999] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   79.694733] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   79.829315] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   93.476308] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   93.610795] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   93.745102] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[   93.879471] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  107.533874] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  107.668548] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  107.803040] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  107.937439] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  121.586990] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  121.721724] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  121.856004] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  121.990585] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  135.644775] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  135.779570] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  135.913970] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  136.048677] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  136.183440] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  149.699752] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  149.834640] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  149.969529] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  150.104262] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  163.753113] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  163.887908] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  164.022429] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
[  164.156981] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
Last edited by parksy on Fri Mar 06, 2020 1:44 pm, edited 3 times in total.

parksy
Posts: 3
Joined: Thu Mar 05, 2020 10:42 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: LG TV에서 HDMI로 화면 출력이 안됩니다.

Unread post by parksy » Fri Mar 06, 2020 1:32 pm

sudo apt install mali-fbdev 로 해결했습니다.

패키지를 새로 설치하는 것 보니 어디선가 누락된 듯 합니다.

parksy
Posts: 3
Joined: Thu Mar 05, 2020 10:42 am
languages_spoken: english
Has thanked: 0
Been thanked: 0
Contact:

Re: LG TV에서 HDMI로 화면 출력이 안됩니다.

Unread post by parksy » Fri Mar 06, 2020 1:38 pm

리부팅 후 다시 화면이 안나옵니다.

User avatar
odroid
Site Admin
Posts: 33698
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean, Japanese
ODROIDs: ODROID
Has thanked: 515 times
Been thanked: 507 times
Contact:

Re: LG TV에서 HDMI로 화면 출력이 안됩니다.

Unread post by odroid » Fri Mar 06, 2020 1:59 pm

boot.ini 파일을 수정해서 Hot Plug Detect 기능을 꺼보면 어떻게 되나요?
https://github.com/mdrjr/n2_bootini/blo ... ot.ini#L66

Post Reply

Return to “N2”

Who is online

Users browsing this forum: No registered users and 4 guests