Factory reset and restore emmc with liunx?

Post Reply
joachi
Posts: 9
Joined: Wed Feb 15, 2023 3:15 am
languages_spoken: english, Swedish
ODROIDs: Odroid b3+
Has thanked: 2 times
Been thanked: 0
Contact:

Factory reset and restore emmc with liunx?

Post by joachi »

Hi i want to restore my Odroid n2+ to the state it was when i bought it, how do i do that?
also i bought a eMMC from Hardkernel with Linux on it, how i do i flash that again so its the same when i bought it? Thank you

ruppi
Posts: 236
Joined: Fri Feb 22, 2013 11:13 pm
languages_spoken: korean
Location: South Korea
Has thanked: 0
Been thanked: 33 times
Contact:

Re: Factory reset and restore emmc with liunx?

Post by ruppi »

You need to flash an OS image freshly into your eMMC module.
Please refer to the link below.
https://wiki.odroid.com/odroid-n2/getti ... redirect=1

joachi
Posts: 9
Joined: Wed Feb 15, 2023 3:15 am
languages_spoken: english, Swedish
ODROIDs: Odroid b3+
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Factory reset and restore emmc with liunx?

Post by joachi »

Followed the guide and flash the OS image into my eMMC modlue. but nothing happens after rebooting.
just black screen with "_" flashing...

ruppi
Posts: 236
Joined: Fri Feb 22, 2013 11:13 pm
languages_spoken: korean
Location: South Korea
Has thanked: 0
Been thanked: 33 times
Contact:

Re: Factory reset and restore emmc with liunx?

Post by ruppi »

Which the switch nob is placed to "SPI" or “MMC" of Boot Select Switch?
If you see "_" blinking of your monitor, it seems that the boot is in progress.
How long have you been waiting since then?

Please refer to the boot sequence in the link below.
https://wiki.odroid.com/odroid-n2/softw ... t_sequence
These users thanked the author ruppi for the post:
joachi (Fri Mar 10, 2023 1:48 am)

joachi
Posts: 9
Joined: Wed Feb 15, 2023 3:15 am
languages_spoken: english, Swedish
ODROIDs: Odroid b3+
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Factory reset and restore emmc with liunx?

Post by joachi »

ive tried both spi and emmc boot,
i waited atleast 15 minutes with no sign of anything else than the blinking _

ruppi
Posts: 236
Joined: Fri Feb 22, 2013 11:13 pm
languages_spoken: korean
Location: South Korea
Has thanked: 0
Been thanked: 33 times
Contact:

Re: Factory reset and restore emmc with liunx?

Post by ruppi »

Can you see the Petiboot screen on SPI Boot select switch?
I think it's a hardware issue of N2 or the Linux image is burned incorrectly.
Could you tried MicroSD?
If the symptoms are the same on MicroSD, it seems to be a hardware issue of N2.

Contact "odroid at hardkernel dot com" with a URL of this thread.
They will help your RMA if you purchased the board from our web-store directly.
Otherwise, contact your local distributor/reseller.
These users thanked the author ruppi for the post:
joachi (Fri Mar 10, 2023 1:48 am)

joachi
Posts: 9
Joined: Wed Feb 15, 2023 3:15 am
languages_spoken: english, Swedish
ODROIDs: Odroid b3+
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Factory reset and restore emmc with liunx?

Post by joachi »

tried sd card and same problem. i sent it back to the reseller now and they will test it.. thank you

joachi
Posts: 9
Joined: Wed Feb 15, 2023 3:15 am
languages_spoken: english, Swedish
ODROIDs: Odroid b3+
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Factory reset and restore emmc with liunx?

Post by joachi »

okey, so update.
the seller was at no help at all, he tried the odroid with a new emmc and could enter linux
(my friend was also able to to that. but the error started when he tried to run
sudo apt update and the seller refuse to do that..)

i flashed linux again onto the emmc
and now i was able to enter linux, but when i tried
sudo apt update
i get an error (look at the pictures..)
So i assumed since the seller claims that the odroid itself is working, it must be the eMMc.. so i buy i new microsd card
install the same linux from here, runs it, i get into linux and i get exactly the same errors..
i cant start firefox since it force closes, what to do? i would say the Odroid is broken somehow? and i asked Hardkernel how to claim it on warranty and they say contact seller. and seller says, we are gonna stop reply to you now, cause there is nothing wrong with your odroid
Attachments
20230309_170533.jpg
20230309_170533.jpg (687.32 KiB) Viewed 161 times
20230309_173236.jpg
20230309_173236.jpg (468.33 KiB) Viewed 161 times
20230309_173224.jpg
20230309_173224.jpg (689.51 KiB) Viewed 161 times

User avatar
odroid
Site Admin
Posts: 40816
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 3098 times
Been thanked: 1709 times
Contact:

Re: Factory reset and restore emmc with liunx?

Post by odroid »

Canonical Ubuntu apt server seemed to be dead temporally.

BTW, did you flash this OS image with Etcher?
https://wiki.odroid.com/odroid-n2/os_im ... u/20220629

joachi
Posts: 9
Joined: Wed Feb 15, 2023 3:15 am
languages_spoken: english, Swedish
ODROIDs: Odroid b3+
Has thanked: 2 times
Been thanked: 0
Contact:

Re: Factory reset and restore emmc with liunx?

Post by joachi »

yes its that version, flashed with balena.
i had the same issues last time i tried weeks ago..

User avatar
odroid
Site Admin
Posts: 40816
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 3098 times
Been thanked: 1709 times
Contact:

Re: Factory reset and restore emmc with liunx?

Post by odroid »

I've freshly flashed the same image into my 16GB eMMC with Etcher this morning.
"apt update" and "apt upgrade" had no issue while updating a few hundreds .deb packages.
Whole update process took about 15 minutes and rebooted.
I'm running the Ubuntu 22.04.2 + Kernel 4.9.337-31 now without major issue.

I think you might need to check some firewall settings in your network infrastructure.

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 1 guest