CoreELEC

Raybuntu · Unread post by **Raybuntu** » Wed Apr 24, 2019 4:45 am

If you have an adapter use that to clean flash otherwise boot CE from SD (emmc removed) and use the installtoemmc script. Follow instructions.

tomk · Unread post by **tomk** » Wed Apr 24, 2019 6:32 am

Found a solution. Booted eMMC to linux(which it came with), dropped to terminal and ran:

sudo dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=1

This rendered the eMMC unable to boot, then I could boot with the coreelec SD card with the eMMC installed, and run the installtoemmc command. I now have eMMC running coreelec!

Solution was from C2 forum:

viewtopic.php?t=25127

joshua.yang · Unread post by **joshua.yang** » Wed Apr 24, 2019 3:42 pm

Netflix on CoreELEC in South Korea. It has played about more than 30 minutes and It looks working flawlessly. It just needs to install Korean fonts.

: 20190424_152838.jpg (464.9 KiB) Viewed 9194 times

Thanks a lot.

sanangel · Unread post by **sanangel** » Wed Apr 24, 2019 8:32 pm

Another user more willing to learn. I'm waiting for an N2 to install Coreelc

donante81 · Unread post by **donante81** » Thu Apr 25, 2019 1:06 am

The n2 is impressive and coreelec works very well. But I can not get the Dvbsky s960 to work. It appears in tvheadend, but it tells me that "there is no free adapter" Any help?

Raybuntu · Unread post by **Raybuntu** » Thu Apr 25, 2019 1:33 am

donante81 wrote: ↑
Thu Apr 25, 2019 1:06 am
The n2 is impressive and coreelec works very well. But I can not get the Dvbsky s960 to work. It appears in tvheadend, but it tells me that "there is no free adapter" Any help?

Please try crazycat driver.

donante81 · Unread post by **donante81** » Thu Apr 25, 2019 6:33 am

Raybuntu wrote: ↑
Thu Apr 25, 2019 1:33 am

donante81 wrote: ↑
Thu Apr 25, 2019 1:06 am
The n2 is impressive and coreelec works very well. But I can not get the Dvbsky s960 to work. It appears in tvheadend, but it tells me that "there is no free adapter" Any help?
Please try crazycat driver.

I think I've tried all the options. driver.dvb.crazycat-9.0.0-2018-04-12, driver.dvb.crazycat_aml-9.1.0, driver.dvb.crazycat-9.1.0. With all of them, he says "no signal". I tried again with the rockpro and everything was perfect.

Raybuntu · Unread post by **Raybuntu** » Thu Apr 25, 2019 7:08 am

It's best to create an issue on CoreELEC forum. Afl1 is our dvb developer and he's not in this forum.

joshua.yang · Unread post by **joshua.yang** » Thu Apr 25, 2019 10:42 am

If someone here who wants to use CoreELEC with the other language rather than English, Install an add-on for your language and change fonts to Arial based.

Works great.

countzero · Unread post by **countzero** » Fri Apr 26, 2019 8:50 pm

got my N2s yesterday; installed Coreelec on 2 of them.
@ the 1st one I restored my C2 Backup => works great
@ the 2nd I restored my NUC7i Backup => works also great with small lags now and then
I am using AEON NOX Silvo on both ....

I AM HAPPY

Is there (somewhere) a counter about the number of CoreELEC@N2 installations?

Raybuntu · Unread post by **Raybuntu** » Fri Apr 26, 2019 9:07 pm

https://stats.coreelec.org/ 225 installations
But we can not say how many disable stats.

albanibr · Unread post by **albanibr** » Sat Apr 27, 2019 8:46 am

Raybuntu wrote: ↑
Fri Apr 26, 2019 9:07 pm
https://stats.coreelec.org/ 225 installations
But we can not say how many disable stats.

Congratulations!

I'm using the latest build and everything works fine.
including "fast gui" was very good!

using an SD, but emmc is on the way!

Thanks for the hard work and patience!

deivid · Unread post by **deivid** » Sat Apr 27, 2019 11:14 pm

Hey, I am having a weird issue and not sure if I should ask here or at the coreelec forum.
* I was at the original alpha version and had issues with NFS mounts being VEERY slow sometimes (everything is wired at 1gb, the nfs source is not the problem), as in, taking 30s to access a folder.
* I updated to devel-1556153587 and now i have the same NFS issue + framedrops when playing anything (can be 1080p h264, 1080p h265 or even 720p h264) from the NFS source.

What is going on?

Edit: same behavior when navigating via samba

Code: Select all

          RX packets:10259537 errors:0 dropped:0 overruns:0 frame:0
          TX packets:479620 errors:0 dropped:0 overruns:0 carrier:0

ethtool reports negotiated at 1gb/s

Raybuntu · Unread post by **Raybuntu** » Sun Apr 28, 2019 2:25 am

I think some people (you are the 2nd user) have network issues. I think it is a bug in the network driver. The thing is it works here for me as I'd say for 90% of the others. I'm getting stable 75MB/s through ssh/sftp.

rooted · Unread post by **rooted** » Sun Apr 28, 2019 12:09 pm

I haven't messed around much but I have played some rather large 4K HDR movies over NFS without any issues.

I did have the system hang once white updating the library and watching live TV through tvheadend. Other than that small issue this has been my best experience with Kodi yet.

mad_ady · Unread post by **mad_ady** » Sun Apr 28, 2019 2:26 pm

@deivid: Use iperf and check for packet loss. There were some reports on ubuntu as well. Fixed with a uboot/petitboot update.

Raybuntu · Unread post by **Raybuntu** » Sun Apr 28, 2019 4:29 pm

mad_ady wrote: ↑
Sun Apr 28, 2019 2:26 pm
@deivid: Use iperf and check for packet loss. There were some reports on ubuntu as well. Fixed with a uboot/petitboot update.

We use recent uboot changes from HK. But I read that too about petitboot update. What is that about.

mad_ady · Unread post by **mad_ady** » Sun Apr 28, 2019 6:32 pm

If you boot via petitboot, it uses uboot flashed on the spi, so that needs to be updated as well

Raybuntu · Unread post by **Raybuntu** » Sun Apr 28, 2019 10:14 pm

mad_ady wrote: ↑
Sun Apr 28, 2019 6:32 pm
If you boot via petitboot, it uses uboot flashed on the spi, so that needs to be updated as well

Yeah but if you didn't switch the SPI switch it should use uboot from emmc and I don't understand how this is causing Network issues.

countzero · Unread post by **countzero** » Tue Apr 30, 2019 6:23 pm

Hi there! Do you guys know where the best place here would be, to request the Power-On-by-USB feature beeing enabled in uboot?

Raybuntu · Unread post by **Raybuntu** » Tue Apr 30, 2019 6:27 pm

countzero wrote: ↑
Tue Apr 30, 2019 6:23 pm
Hi there! Do you guys know where the best place here would be, to request the Power-On-by-USB feature beeing enabled in uboot?

Didn't you ask me that on CE forum already

?
Or was is someone else?
I will look into it when I have some time.

countzero · Unread post by **countzero** » Tue Apr 30, 2019 9:22 pm

Raybuntu wrote: ↑
Tue Apr 30, 2019 6:27 pm

countzero wrote: ↑
Tue Apr 30, 2019 6:23 pm
Hi there! Do you guys know where the best place here would be, to request the Power-On-by-USB feature beeing enabled in uboot?
Didn't you ask me that on CE forum already ?
Or was is someone else?
I will look into it when I have some time.

Ähm ... yep, I did, but I wasn't sure if I shouldn't ask anywhere "more close to" the Board-Developers, cause I didn't want to bother you (and the other CE developers) with my topics

Raybuntu · Unread post by **Raybuntu** » Tue Apr 30, 2019 9:28 pm

We do u-boot stuff too. I know how to keep the power on in u-boot. I just need to integrate an interrupt source.

slinkys4evrh · Unread post by **slinkys4evrh** » Wed May 01, 2019 2:01 am

For some reason I'm not able to get this to boot however I'm able to get Android to boot. I've tried a variety of different SD flashing tools and still getting the same results where this image just boot loops. Any Ideas on what I might be doing wrong?

I should also add that I have the switch set to SPI with an flashed SD card installed. I do not have an EMMC installed.

Raybuntu · Unread post by **Raybuntu** » Wed May 01, 2019 2:47 am

SPI switch is for petitboot. You set the switch to emmc. SD card boot will work then

countzero · Unread post by **countzero** » Wed May 01, 2019 5:05 am

Raybuntu wrote: ↑
Tue Apr 30, 2019 9:28 pm
We do u-boot stuff too. I know how to keep the power on in u-boot. I just need to integrate an interrupt source.

Wow, really cool!
Thanks in advance - for whatever u do

allanallanf · Unread post by **allanallanf** » Fri May 03, 2019 3:52 am

Hi,

I'm about to place an order, but i'm new to SBC - this will be my first one. Really I only need kodi that can play 4k HDR files (my older NUC cannot). I have a few questions though

1 - What is the best way to install core elec - on a SD card or should I buy an emmc, wipe it and install on that?
2 - If i install android can I just install regular kodi from the play store - will it work just as well?
3 - In order to make sure I order everything I need, could you tell me if there is anything missing. I plan to buy - 1 x N2, 1 x clear case, 1 x remote control, 1 x US plug, 1 x emmc card (if needed from question 1), 1 x emmc writer (if needed from question 1). 1 x bluetooth adapter (for headphones). Am i missing anything? I have USB drives/SD cards already. Do I need to purchase the battery as well?

Many thanks and sorry for all the questions.

mad_ady · Unread post by **mad_ady** » Fri May 03, 2019 2:42 pm

1. For coreelec, an sdcard should be enough
2. For Android you should consider the emmc. Slow sd cards will cause apps to force-close. Playstore kodi should work. If using the emmc you should get at least the 1.5$ emmc adapter to be able to reflash it.
3. Not sure if power supply and cables are two different items. Not sure if BT audio is supported by coreelec (should work on Android).

egron9000 · Unread post by **egron9000** » Sat May 04, 2019 4:27 am

slinkys4evrh wrote: ↑
Wed May 01, 2019 2:01 am
For some reason I'm not able to get this to boot however I'm able to get Android to boot. I've tried a variety of different SD flashing tools and still getting the same results where this image just boot loops. Any Ideas on what I might be doing wrong?

I should also add that I have the switch set to SPI with an flashed SD card installed. I do not have an EMMC installed.

I had the same thing, writing a couple passes of 0's to the SD card worked for me.

Raybuntu · Unread post by **Raybuntu** » Sat May 04, 2019 5:21 am

I recommend the emmc. It is way faster. But it's not mandatory

Pelican · Unread post by **Pelican** » Sat May 04, 2019 7:06 am

allanallanf wrote: ↑
Fri May 03, 2019 3:52 am
Hi,

I'm about to place an order, but i'm new to SBC - this will be my first one. Really I only need kodi that can play 4k HDR files (my older NUC cannot). I have a few questions though

1 - What is the best way to install core elec - on a SD card or should I buy an emmc, wipe it and install on that?
2 - If i install android can I just install regular kodi from the play store - will it work just as well?
3 - In order to make sure I order everything I need, could you tell me if there is anything missing. I plan to buy - 1 x N2, 1 x clear case, 1 x remote control, 1 x US plug, 1 x emmc card (if needed from question 1), 1 x emmc writer (if needed from question 1). 1 x bluetooth adapter (for headphones). Am i missing anything? I have USB drives/SD cards already. Do I need to purchase the battery as well?

Many thanks and sorry for all the questions.

1. I tried both. emmc is faster than the fastest sd card. There are some issues with sd card installation (probably will fixed soon)
2. Android on Kodi has many limitation (only stereo audio out, no auto frame rate switch, SDR2HDR is always on, etc). If you want to use your N2 as a media player, then CE is strongly recommended.
3. Black case looks nicer.

N2 works without battery but it is cheap, so why not...

stefer · Unread post by **stefer** » Sat May 04, 2019 7:19 am

I just received my N2 but can't find the CoreELEC image, the website seems down, and github only has the official releases, can't find anything for N2

Any idea when it'll be back up?

Raybuntu · Unread post by **Raybuntu** » Sat May 04, 2019 7:20 am

We are having technical difficulties with the server.

Raybuntu · Unread post by **Raybuntu** » Sat May 04, 2019 7:38 am

I've uploaded recent testbuilds to mega:
https://mega.nz/#F!h0hR2QwI!UO4rInK6_exz28IzFirXtQ
Nightlies are available here:
http://coreelec.pokey.de/

stefer · Unread post by **stefer** » Sat May 04, 2019 8:53 am

Thank you Ray!

amv · Unread post by **amv** » Sat May 04, 2019 4:16 pm

A list of problems that I have with CoreELEC (latest test build) using a fresh image:
- transmission doesn't start (transmission-daemon.service is missing)
- uTorrent doesn't start (fail to connect to daemon)
- Docker doesn't start

Any thoughts on what could cause all these?

Raybuntu · Unread post by **Raybuntu** » Sat May 04, 2019 6:11 pm

Transmission and uTorrent are not provided by us in our repo so you need to bug your addon developer.
Docker should work.

amv · Unread post by **amv** » Sat May 04, 2019 6:26 pm

Thank you for your answer.
Regarding Docker ... I was able to execute systemctl start service.system.docker.service, but when I want to open the addon nothing happens.

allanallanf · Unread post by **allanallanf** » Sun May 05, 2019 1:16 am

Thanks for the advice all.

If I plan to put corelec on an emmc do I just buy the green android emmc and write corelec on to it using the emmc usb adaptor? If so, I presume the 8gb is plenty for corelec?

ninek · Unread post by **ninek** » Sun May 05, 2019 1:27 am

I bought an 8GB eMMC (I think I got the red dot, but it probably doesn't matter) and am running CoreELEC on it just fine. Just overwrote the pre-installed OS.

Raybuntu · Unread post by **Raybuntu** » Tue May 07, 2019 1:45 am

For all the DVB Freaks. I'm Crossposting this here because it's pretty cool:

https://discourse.coreelec.org/t/odroid ... uners/5014

AnjunaBeats · Unread post by **AnjunaBeats** » Tue May 07, 2019 2:37 am

I leave CoreElec on all day because I have Transmission running. I'm going to work and when I return a few hours later I find the Odroid N2 off.

Is this Coreelec's thing or the n2?

Raybuntu · Unread post by **Raybuntu** » Tue May 07, 2019 2:51 am

Can't say. You need to look at logs.

loznic89 · Unread post by **loznic89** » Tue May 07, 2019 8:11 am

good job giving support CE in N2, thanks. in a few days i want to try tunner usb DVBSKY S960 v2

regards

Unread post by **odroid** » Tue May 07, 2019 11:02 am

loznic89 wrote: ↑
Tue May 07, 2019 8:11 am
good job giving support CE in N2, thanks. in a few days i want to try tunner usb DVBSKY S960 v2

regards

I have no experience of using a DVB tuner since there is no such broadcasting services in Korea.
Please share your test result.
BTW, is it using Tvheadend?

loznic89 · Unread post by **loznic89** » Tue May 07, 2019 4:33 pm

yes, i will try with tvheadend

Raybuntu · Unread post by **Raybuntu** » Tue May 07, 2019 5:12 pm

@odroid. We support VDR, TVheadend etc. TVH is the easiest for users to setup I think. We have a lot of users using TVH and DVB already and there is no issues. Only thing we noticed is this USB3 power issue that is causing USB sticks to fail with signal. I thing the user @rosenrot reported it here too.

Raybuntu · Unread post by **Raybuntu** » Tue May 07, 2019 5:42 pm

Cross posting this again: https://discourse.coreelec.org/t/odroid ... river/4995

Pretty cool isn't it.
Someone fitted a 128x32 OLED display in the official case too:

Those displays are supported out of the box with CoreELEC.

Unread post by **odroid** » Tue May 07, 2019 5:44 pm

Amazing! It seems to be a real *ELEC*.

loznic89 · Unread post by **loznic89** » Wed May 08, 2019 4:33 am

odroid wrote: ↑
Tue May 07, 2019 5:44 pm
Amazing! It seems to be a real *ELEC*.

just try a bit your android rom with a good performance for the little development it has. I want to learn Linux with this great motherboard

elec is in beta but it works better than expected and the performance is brutal, thanks

I am testing the DVB USB tuner in an enigma2 decoder and it works. tomorrow I'm going to try it on the N2 (CE + tvheadend), I have a lot of hopes that it will work

regards