Page 3 of 8

Re: CoreELEC

Posted: Tue May 14, 2019 10:22 pm
by istanbulls
joshua.yang wrote:
Wed Apr 24, 2019 3:42 pm
Netflix on CoreELEC in South Korea. It has played about more than 30 minutes and It looks working flawlessly. It just needs to install Korean fonts.


20190424_152838.jpg


Thanks a lot. :)
Hello,
How to install Netflix. Can you help me?

Netflix is running, I've added Netflix addons

Re: CoreELEC

Posted: Wed May 15, 2019 1:56 pm
by joshua.yang
kardanadm wrote:
Tue May 14, 2019 10:22 pm
joshua.yang wrote:
Wed Apr 24, 2019 3:42 pm
Netflix on CoreELEC in South Korea. It has played about more than 30 minutes and It looks working flawlessly. It just needs to install Korean fonts.


20190424_152838.jpg


Thanks a lot. :)
Hello,
How to install Netflix. Can you help me?

Netflix is running, I've added Netflix addons
Yes, you can install it as an add-on. :)

Perhaps you've already installed the other packages that need to come with that, they are guided in runtime. The plugin will show which the other packages needed.

Re: CoreELEC

Posted: Sun May 19, 2019 12:27 am
by loznic89
Hello, I would like to ask you a question, having emmc with android and CE in SD as I do to switch to SD while being on android?

always starts the nand, being put

Re: CoreELEC

Posted: Thu May 23, 2019 3:17 am
by AnjunaBeats
If you have ignition odriod n2 with coreelect, you leave it on with transmission ... If you turn off the TV, when no output is detected by the hdmi, it automatically turns off ... so I have to have the TV on so that transmission work. I am forced to delete this S.O

Re: CoreELEC

Posted: Thu May 23, 2019 4:05 am
by Raybuntu
Adjust your CEC settings in kodi peripherals menu

Re: CoreELEC

Posted: Thu May 23, 2019 12:27 pm
by joshua.yang
I have some tested to check audio passthrough using CoreELEC 190508 version.

We have a Yamaha RX-V585 audio receiver that supports DTS:X and Dolby Atmos.
batch_20190523_104440.jpg
batch_20190523_104440.jpg (198.6 KiB) Viewed 14641 times
Set it up with Yamaha 5.1 channel speaker set and 4K TV.
Then set Kodi audio settings to set speaker channels and to allow audio passthrough.
batch_20190523_104237.jpg
batch_20190523_104237.jpg (238.42 KiB) Viewed 14641 times
batch_20190523_104256.jpg
batch_20190523_104256.jpg (259.38 KiB) Viewed 14641 times
Then played trailer videos for these codecs. The files name are:
- DTSX_Demo_2016.m2ts
- dolby-atmos-trailer_amaze_1080.mp4

Both are working very well. :)
batch_20190523_104448.jpg
batch_20190523_104448.jpg (186.54 KiB) Viewed 14641 times
batch_20190523_104516.jpg
batch_20190523_104516.jpg (185.06 KiB) Viewed 14641 times
Thanks, CoreELEC team.

Re: CoreELEC

Posted: Thu May 23, 2019 8:57 pm
by Ize
I'm using CoreELEC in combination with emby since yesterday and it's running awesome.
I hope shanti releases his retro gaming addon soon :D

PS danke Raybuntu :)

Re: CoreELEC

Posted: Sun May 26, 2019 3:59 am
by StefanRvO
Will it be possible to grab the screen when playing hardware decoded videos in coreelec? I want to run Hyperion (https://hyperion-project.org/) to get ambilight on my TV, but it requires that it is possible to grab screenshots of the video playing.
I'm currently running a Rock64Pro, but is having a hard time getting it working on this board when playing hardware decoded videos, so I am considering buying an Odroid N2 if it is possible to get it working on that

Re: CoreELEC

Posted: Sun May 26, 2019 3:03 pm
by Raybuntu
StefanRvO wrote:
Sun May 26, 2019 3:59 am
Will it be possible to grab the screen when playing hardware decoded videos in coreelec? I want to run Hyperion (https://hyperion-project.org/) to get ambilight on my TV, but it requires that it is possible to grab screenshots of the video playing.
I'm currently running a Rock64Pro, but is having a hard time getting it working on this board when playing hardware decoded videos, so I am considering buying an Odroid N2 if it is possible to get it working on that
It is supported out of the box with Hyperion.NG (it's in our repo)

Re: CoreELEC

Posted: Sun May 26, 2019 6:47 pm
by StefanRvO
Raybuntu wrote:
Sun May 26, 2019 3:03 pm
StefanRvO wrote:
Sun May 26, 2019 3:59 am
Will it be possible to grab the screen when playing hardware decoded videos in coreelec? I want to run Hyperion (https://hyperion-project.org/) to get ambilight on my TV, but it requires that it is possible to grab screenshots of the video playing.
I'm currently running a Rock64Pro, but is having a hard time getting it working on this board when playing hardware decoded videos, so I am considering buying an Odroid N2 if it is possible to get it working on that
It is supported out of the box with Hyperion.NG (it's in our repo)
Ok, thanks, that sound really good :)

Re: CoreELEC

Posted: Wed May 29, 2019 9:44 am
by n2qcn
wow, that was one painless install!

7.1 Master Audio passthrough worked after finding the menu option. Scraped my NFS share of 975 movies in less than 20mins. Just need to find a hardware remote now.

Outstanding job! thanks!

Re: CoreELEC

Posted: Fri May 31, 2019 11:52 am
by rooted
Most remotes will work if you have an old one laying around.

Re: CoreELEC

Posted: Sat Jun 01, 2019 5:24 am
by void4ever
Grabbed an N2 for my mom and installed CoreElec, and I'm here to report another satisfied customer. Been doing some testing and aside from a few shows not scraping correctly it's been working perfectly!

Setup an external 8TB drive and to my surprised it picked it up without issue. I figured i'd need to format it to ext4, I didn't expect to have NTFS support out of the box! SFTP works great so I can send her things she asks for, and the Kodi controller app for android also works great.

I assume with auto update on i shouldn't need to worry about manually reflashing the SD card with official stable releases?

Re: CoreELEC

Posted: Sat Jun 01, 2019 8:56 pm
by void4ever
I have noticed one thing and I'm not sure how to proceed. I'm not sure if this is a CoreElec issue, or Kodi or what.

I'm trying to scrape a old TV show, but it refuses to do so. According to the debug logs it's finding an episode match for every single episode but once it gets to the end it's trying to make a call to api.thetvdb.com for an episode list, then fails.

Thinking it was an issue with thetvdb I first tried disabling that scraper, then just completely uninstalled it but no matter what I still get that call to api.thetvdb.com despite the fact it's been removed. The only scraper installed atm is "The Movie Database". I'll be honest I'm new to scraping, so perhaps I've missed something but I checked and the address for TMDB is api.themoviedb.org

Probably me just being blind, but any ideas?

I won't post the debug for all 11 seasons, just the last few and the error:
2019-06-01 04:26:57.629 T:3909055344 DEBUG: VideoInfoScanner: Found episode match /var/media/Seagate Expansion Dr/media/tv/Mash (1972)/Mash S11/MASH.S11E15.As.Time.Goes.By.WEBRip.1080p.AAC.H265-d3g.mkv (s11e15) [s([0-9]+)[ ._x-]*e([0-9]+(?:(?:[a-i]|\.[1-9])(?![0-9]))?)([^\\/]*)$]

2019-06-01 04:26:57.630 T:3909055344 DEBUG: VideoInfoScanner: Found episode match /var/media/Seagate Expansion Dr/media/tv/Mash (1972)/Mash S11/MASH.S11E16.Goodbye.Farewell.and.Amen.WEBRip.1080p.AAC.H265-d3g.mkv (s11e16) [s([0-9]+)[ ._x-]*e([0-9]+(?:(?:[a-i]|\.[1-9])(?![0-9]))?)([^\\/]*)$]

2019-06-01 04:26:57.632 T:3909055344 DEBUG: GetEpisodeList: Searching 'https://api.thetvdb.com/login?{"apikey" ... ation/json' using The Movie Database scraper (file: '/storage/.kodi/addons/metadata.tvshows.themoviedb.org', content: 'tvshows', version: '3.1.1')

2019-06-01 04:26:57.643 T:3909055344 DEBUG: scraper: GetEpisodeList returned <episodeguide></episodeguide>

2019-06-01 04:26:57.643 T:3909055344 WARNING: No information found for item '/var/media/Seagate Expansion Dr/media/tv/Mash (1972)/', it won't be added to the library.

Re: CoreELEC

Posted: Sat Jun 01, 2019 11:04 pm
by Raybuntu
Kodi issue scraping.

Re: CoreELEC

Posted: Sun Jun 02, 2019 10:06 am
by fcmts
Hi,
I can't boot image 20190601 nor 20190531, only 20190530.

Re: CoreELEC

Posted: Sun Jun 02, 2019 6:17 pm
by Raybuntu
fcmts wrote:
Sun Jun 02, 2019 10:06 am
Hi,
I can't boot image 20190601 nor 20190531, only 20190530.
Interesting. Did you flash it clean?
Any errors,logs?

Re: CoreELEC

Posted: Sun Jun 02, 2019 10:49 pm
by fcmts
Raybuntu wrote:
Sun Jun 02, 2019 6:17 pm
fcmts wrote:
Sun Jun 02, 2019 10:06 am
Hi,
I can't boot image 20190601 nor 20190531, only 20190530.
Interesting. Did you flash it clean?
Any errors,logs?
It doesn't work clean or updating.
No, just a black screen and no heartbeat. Is there any log file written in the SD? I have a 2GB N2, a FHD TV and a RTC battery.

Re: CoreELEC

Posted: Mon Jun 03, 2019 1:41 am
by Raybuntu
fcmts wrote:
Sun Jun 02, 2019 10:49 pm
Raybuntu wrote:
Sun Jun 02, 2019 6:17 pm
fcmts wrote:
Sun Jun 02, 2019 10:06 am
Hi,
I can't boot image 20190601 nor 20190531, only 20190530.
Interesting. Did you flash it clean?
Any errors,logs?
It doesn't work clean or updating.
No, just a black screen and no heartbeat. Is there any log file written in the SD? I have a 2GB N2, a FHD TV and a RTC battery.
There is currently an issue with Overclocking and this new 4.9.177 Kernel. This kernel was added 2 days ago. But it boots here.

Re: CoreELEC

Posted: Mon Jun 03, 2019 5:30 am
by fcmts
Raybuntu wrote:
Mon Jun 03, 2019 1:41 am
There is currently an issue with Overclocking and this new 4.9.177 Kernel. This kernel was added 2 days ago. But it boots here.
I'm using an 1A power source. You think this could be the reason?

Re: CoreELEC

Posted: Mon Jun 03, 2019 5:35 am
by Raybuntu
We have multiple reports. Looks like the new uboot version which breaks 2G ram boxes. Am I right?

Re: CoreELEC

Posted: Wed Jun 05, 2019 2:16 am
by rooted
fcmts wrote:
Raybuntu wrote:
Mon Jun 03, 2019 1:41 am
There is currently an issue with Overclocking and this new 4.9.177 Kernel. This kernel was added 2 days ago. But it boots here.
I'm using an 1A power source. You think this could be the reason?
1A is not enough power

Re: CoreELEC

Posted: Wed Jun 05, 2019 3:04 am
by Raybuntu
With the help of @tobetter and @Joy we resolved a lot of issues lately. Please try the next days nightly build or my testbuild:

https://test.coreelec.org/ray/CoreELEC- ... 635864.tar

Re: CoreELEC

Posted: Wed Jun 05, 2019 9:51 am
by fcmts
Raybuntu wrote:
Wed Jun 05, 2019 3:04 am
With the help of @tobetter and @Joy we resolved a lot of issues lately. Please try the next days nightly build or my testbuild:

https://test.coreelec.org/ray/CoreELEC- ... 635864.tar
Now I could boot with the nightly 20190603 (.update). Thank you!

Re: CoreELEC

Posted: Thu Jun 06, 2019 5:36 pm
by Badger101
Hi, I have a N2 (4G model) and cannot get it to boot with CoreElec (only the red LED lit)
I've tried to write the image to the SD card with win32diskimager, and libreelec usb-sd creator.
The 512MB partition is created, with what I think would be all the files, and the other non-windows partition is also there.
I've even tried moving (and re-naming to dtb.img) some of the N2 .dtb files from the device tree folder to the root folder, but that has not worked either.
Any ideas what I am doing wrong? I'm using a 2GB SD Card - could that be the issue?

Thanks

Re: CoreELEC

Posted: Thu Jun 06, 2019 10:29 pm
by Badger101
I've just tried a different (8GB) SD card and it worked first time so I think the 2GB card is either too small, or too slow..

Thanks

Re: CoreELEC

Posted: Fri Jun 07, 2019 12:36 am
by nurikodd
when playing youtube videos in 4k framerate way to low 4-24fps, is this normal for 4k yt videos under kodi or this is unresolved yet issue?

Re: CoreELEC

Posted: Fri Jun 07, 2019 3:33 am
by countzero
Badger101 wrote:
Thu Jun 06, 2019 5:36 pm
Hi, I have a N2 (4G model) and cannot get it to boot with CoreElec (only the red LED lit)
I've tried to write the image to the SD card with win32diskimager, and libreelec usb-sd creator.
The 512MB partition is created, with what I think would be all the files, and the other non-windows partition is also there.
I've even tried moving (and re-naming to dtb.img) some of the N2 .dtb files from the device tree folder to the root folder, but that has not worked either.
Any ideas what I am doing wrong? I'm using a 2GB SD Card - could that be the issue?

Thanks
Maybe you have got the wrong image?
Did you try this one: https://relkai.coreelec.org/CoreELEC-Am ... _N2.img.gz

EDIT: 2GB??? I would say, that's a bit small :)

Re: CoreELEC

Posted: Fri Jun 07, 2019 3:38 am
by countzero
Raybuntu wrote:
Tue Apr 30, 2019 9:28 pm
We do u-boot stuff too. I know how to keep the power on in u-boot. I just need to integrate an interrupt source.
still hoping for that one ;-) although I think other stuff is much more important and I might be the only one with this, "power on via USB through USB-keyboard kexpress" usecase ...

Re: CoreELEC

Posted: Mon Jun 10, 2019 10:40 am
by fcmts
Is it feasible that CoreELEC adopt the same Kodi fork of this LibreELEC fork that is able to play 3D MVC files?

https://forum.kodi.tv/showthread.php?tid=343068

Re: CoreELEC

Posted: Mon Jun 10, 2019 4:34 pm
by Raybuntu
This is for Raspberry Pi. Our Kodi fork is for Amlogic. Iirc there is 3D support already but I have no 3D TV.

Re: CoreELEC

Posted: Sat Jun 15, 2019 8:25 pm
by fcmts
Raybuntu wrote:
Mon Jun 10, 2019 4:34 pm
This is for Raspberry Pi. Our Kodi fork is for Amlogic. Iirc there is 3D support already but I have no 3D TV.
I have a 3D TV and I can say that it doesn't work. :(

Re: CoreELEC

Posted: Sun Jun 16, 2019 8:28 am
by rooted
fcmts wrote:
Raybuntu wrote:
Mon Jun 10, 2019 4:34 pm
This is for Raspberry Pi. Our Kodi fork is for Amlogic. Iirc there is 3D support already but I have no 3D TV.
I have a 3D TV and I can say that it doesn't work. :(
Are you on the latest nightly?

Re: CoreELEC

Posted: Sun Jun 16, 2019 8:55 pm
by Sholander
fcmts wrote:
Sat Jun 15, 2019 8:25 pm
Raybuntu wrote:
Mon Jun 10, 2019 4:34 pm
This is for Raspberry Pi. Our Kodi fork is for Amlogic. Iirc there is 3D support already but I have no 3D TV.
I have a 3D TV and I can say that it doesn't work. :(
I have an LG 3D TV, and can say that ALL 3D samples and 3D movies I have play correctly on N2 with latest nightly:

Some Samples:
3D ISO sample with pop-out and depth.iso
3D Subs in 3D ISO Sample.iso
ISO-full3D-sample.iso
3D-full-MVC.mkv
HSBS-3D.mkv

Some movies:
Jurassic World 1080p 3D-SBS.mkv (with external .srt subtitles)
Star.Wars.Episode.VII.The.Force.Awakens.mkv (with external .srt subtitles)

All above work perfectly on my 3D TV.

Re: CoreELEC

Posted: Mon Jun 17, 2019 6:21 am
by fcmts
Sholander wrote:
Sun Jun 16, 2019 8:55 pm
I have an LG 3D TV, and can say that ALL 3D samples and 3D movies I have play correctly on N2 with latest nightly:

Some Samples:
3D ISO sample with pop-out and depth.iso
3D Subs in 3D ISO Sample.iso
ISO-full3D-sample.iso
3D-full-MVC.mkv
HSBS-3D.mkv

Some movies:
Jurassic World 1080p 3D-SBS.mkv (with external .srt subtitles)
Star.Wars.Episode.VII.The.Force.Awakens.mkv (with external .srt subtitles)

All above work perfectly on my 3D TV.
The SBS files play fine, but the full MVC ones don't. Maybe it's some tricky setting I'm missing. There is no "hardware" 3D mode option, like in raspberry's LibreELEC.

Re: CoreELEC

Posted: Mon Jun 17, 2019 8:15 am
by Sholander
The 2 samples I tried, "3D-full-MVC.mkv" and "ISO-full3D-sample.iso", are full MVC ones and play OK by me with hardware decoding, so no need for any "hardware 3D mode" option.

Re: CoreELEC

Posted: Mon Jun 17, 2019 3:00 pm
by rooted

Re: CoreELEC

Posted: Tue Jun 18, 2019 6:21 pm
by Sholander
To correct myself, only 3D-SBS and 3D-TAB content plays in proper 3D and 3D-MVC content plays back in 2D.

Re: CoreELEC

Posted: Sat Jun 22, 2019 4:08 pm
by InspecteurGadget
Hi, Gpio work on coreelec? (Ex: shutdown)

Re: CoreELEC

Posted: Tue Jun 25, 2019 1:06 am
by marcavatar
Just arrived bought the 4 gb version, I will try it when CoreELEC will be available official version, shame you don't mount the integrated WIFI module like the Raspberry 4 however it is a small neo surmountable. I look forward to official CoreElec. Hello and congratulations for the forum.

Re: CoreELEC

Posted: Tue Jun 25, 2019 4:37 am
by jochen02
Raybuntu wrote:
Tue May 07, 2019 5:12 pm
@odroid. We support VDR, TVheadend etc. TVH is the easiest for users to setup I think. We have a lot of users using TVH and DVB already and there is no issues. Only thing we noticed is this USB3 power issue that is causing USB sticks to fail with signal. I thing the user @rosenrot reported it here too.
What do you recommend fpr N2 to get USB3 throughput with proper power supply enough for TV-B2 sticks? I am planning my N2 buy. ;-)

Re: CoreELEC

Posted: Tue Jul 02, 2019 5:47 pm
by Kuennek
Hello,
Can we overclock the N2 with newest nightly from today?
Thx

Re: CoreELEC

Posted: Tue Jul 02, 2019 5:56 pm
by Raybuntu
Yes it's possible

Re: CoreELEC

Posted: Tue Jul 02, 2019 7:43 pm
by Kuennek
Sure? I change the Frequenz but nothing happend.
Can you say me what i must Change in boot.ini?

Re: CoreELEC

Posted: Tue Jul 02, 2019 7:52 pm
by tobetter
Kuennek wrote:
Tue Jul 02, 2019 7:43 pm
Sure? I change the Frequenz but nothing happend.
Can you say me what i must Change in boot.ini?
What did you change and how? Have you refer the link?
https://wiki.odroid.com/odroid-n2/appli ... t_cpu_freq

Re: CoreELEC

Posted: Tue Jul 02, 2019 8:04 pm
by Kuennek
setenv max_freq_a53 “1896"
setenv max_freq_a73 "1800"

Change IT to

# setenv max_freq_a73 "2004"

And there i changed only the Frequenz to 2004 on a73and reboot but Not happend

Re: CoreELEC

Posted: Tue Jul 02, 2019 11:46 pm
by Kuennek
Now it work with these

setenv max_freq_a73 "2004"
setenv max_freq_a53 "1992"

have no Problem to boot or Playing 4 K videos.

Can we make maybe one Step more OC.

Re: CoreELEC

Posted: Wed Jul 03, 2019 12:36 am
by tobetter
Kuennek wrote:
Tue Jul 02, 2019 11:46 pm
Now it work with these

setenv max_freq_a73 "2004"
setenv max_freq_a53 "1992"

have no Problem to boot or Playing 4 K videos.

Can we make maybe one Step more OC.
Does one step more mean more than 2.004 and 1.992? We've tried like 2.2 but failed.

Re: CoreELEC

Posted: Wed Jul 03, 2019 1:37 am
by Kuennek
I Test ist later. What frequenz is it ?2200?or like 2204?

Re: CoreELEC

Posted: Fri Jul 05, 2019 1:05 pm
by Kuennek
Nobody know?