Armbian TVHeadend using a PCTV 292e

Post Reply
Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Hello,

I'm having a few problems getting the PCTV 292e installed and working correctly on my N2 and wondered if someone could help?

I've installed TVHeadend using the armbian-config command which went well, but I'm having problems (I think) when the 292e stick is connected to the USB2 OTG port.
I have installed all the firmware for the tuner from here:
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/
and put it into the /lib/firmware folder

Code: Select all

stefan@odroidn2:/lib/firmware$ ls
BCM4345C0.hcd            dvb-demod-mn88473-01.fw     edid                        imx               nvram_ap6398s.txt  ti-connectivity
BCM4345C5.hcd            dvb-demod-si2168-02.fw      fw_bcm43455c0_ag.bin        mediatek          rkwifi             v4l-coda960-imx6dl.bin
README.md                dvb-demod-si2168-a30-01.fw  fw_bcm43455c0_ag_apsta.bin  meson             rt2870.bin         v4l-coda960-imx6q.bin
RTL8192SU                dvb-demod-si2168-b40-01.fw  fw_bcm43455c0_ag_p2p.bin    mt7601.bin        rtl_bt             vpu
ap6210                   dvb-demod-si2168-d60-01.fw  fw_bcm43456c5_ag.bin        mt7601u.bin       rtlbt              xr819
ap6212                   dvb-fe-xc5000-1.6.114.fw    fw_bcm43456c5_ag_apsta.bin  mt7610u.bin       rtlwifi
brcm                     dvb-tuner-si2141-a10-01.fw  fw_bcm43456c5_ag_p2p.bin    nvram_ap6255.txt  s5p-mfc-v8.fw
When the 292e is connected to the USB2 OTG it looks like the Firmware download to the stick is failing, I've attached the dmesg below.

dmesg when connected via USB2 OTG:

Code: Select all

stefan@odroidn2:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.6.15-meson64 (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #20.05.2 SMP PREEMPT Tue Jun 2 20:56:52 CEST 2020
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b5800000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xb5038100-0xb5039fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ed7fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000ed7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] On node 0 totalpages: 972032
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261376 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11104 pages used for memmap
[    0.000000]   DMA32 zone: 710656 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54168 r8192 d31848 u94208
[    0.000000] pcpu-alloc: s54168 r8192 d31848 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956832
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=8964d5d7-4a03-47dd-9d2e-6c6a58d278f4 rootwait rootflags=data=writeback rw clk_ignore_unused rootfstype=ext4 console=ttyAML0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=1080p60hz cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi  disablehpd=false cvbscable=0 overscan=100
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x38864000-0x3c864000] (64MB)
[    0.000000] Memory: 2786984K/3888128K available (13052K kernel code, 1268K rwdata, 5372K rodata, 1088K init, 579K bss, 183640K reserved, 917504K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] random: get_random_bytes called from start_kernel+0x354/0x4e0 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000257] Console: colour dummy device 80x25
[    0.000267] printk: console [tty1] enabled
[    0.000353] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000360] pid_max: default: 32768 minimum: 301
[    0.000446] LSM: Security Framework initializing
[    0.000467] Yama: becoming mindful.
[    0.000546] AppArmor: AppArmor initialized
[    0.000593] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000610] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000655] *** VALIDATE tmpfs ***
[    0.001051] *** VALIDATE proc ***
[    0.001262] *** VALIDATE cgroup ***
[    0.001266] *** VALIDATE cgroup2 ***
[    0.031883] rcu: Hierarchical SRCU implementation.
[    0.042811] EFI services will not be available.
[    0.047930] smp: Bringing up secondary CPUs ...
[    0.080283] Detected VIPT I-cache on CPU1
[    0.080330] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.112794] CPU features: detected: ARM erratum 858921
[    0.112803] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.112810] Detected VIPT I-cache on CPU2
[    0.112833] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.112848] arch_timer: CPU2: Trapping CNTVCT access
[    0.112856] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.144328] Detected VIPT I-cache on CPU3
[    0.144343] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.144349] arch_timer: CPU3: Trapping CNTVCT access
[    0.144355] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.176387] Detected VIPT I-cache on CPU4
[    0.176401] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.176408] arch_timer: CPU4: Trapping CNTVCT access
[    0.176414] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.208441] Detected VIPT I-cache on CPU5
[    0.208456] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.208462] arch_timer: CPU5: Trapping CNTVCT access
[    0.208468] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.208539] smp: Brought up 1 node, 6 CPUs
[    0.208545] SMP: Total of 6 processors activated.
[    0.208551] CPU features: detected: 32-bit EL0 Support
[    0.208556] CPU features: detected: CRC32 instructions
[    0.219203] CPU: All CPU(s) started at EL2
[    0.219249] alternatives: patching kernel code
[    0.221085] devtmpfs: initialized
[    0.231810] Registered cp15_barrier emulation handler
[    0.231821] Registered setend emulation handler
[    0.232219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.232271] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.252752] xor: measuring software checksum speed
[    0.292511]    8regs     :  2374.000 MB/sec
[    0.332522]    32regs    :  3852.000 MB/sec
[    0.372557]    arm64_neon:  3556.000 MB/sec
[    0.372560] xor: using function: 32regs (3852.000 MB/sec)
[    0.372570] pinctrl core: initialized pinctrl subsystem
[    0.373281] thermal_sys: Registered thermal governor 'fair_share'
[    0.373284] thermal_sys: Registered thermal governor 'bang_bang'
[    0.373289] thermal_sys: Registered thermal governor 'step_wise'
[    0.373291] thermal_sys: Registered thermal governor 'user_space'
[    0.373631] DMI not present or invalid.
[    0.373997] NET: Registered protocol family 16
[    0.381162] DMA: preallocated 256 KiB pool for atomic allocations
[    0.381171] audit: initializing netlink subsys (disabled)
[    0.381257] audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1
[    0.382416] cpuidle: using governor menu
[    0.382760] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.382869] ASID allocator initialised with 65536 entries
[    0.383688] Serial: AMBA PL011 UART driver
[    0.397189] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.397195] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.397198] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.397201] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.399736] cryptd: max_cpu_qlen set to 1000
[    0.472744] raid6: neonx8   gen()  2775 MB/s
[    0.540805] raid6: neonx8   xor()  2027 MB/s
[    0.608861] raid6: neonx4   gen()  3154 MB/s
[    0.676929] raid6: neonx4   xor()  2332 MB/s
[    0.745011] raid6: neonx2   gen()  2565 MB/s
[    0.813065] raid6: neonx2   xor()  2149 MB/s
[    0.881135] raid6: neonx1   gen()  1965 MB/s
[    0.949189] raid6: neonx1   xor()  1728 MB/s
[    1.017248] raid6: int64x8  gen()  1376 MB/s
[    1.085314] raid6: int64x8  xor()   734 MB/s
[    1.153378] raid6: int64x4  gen()  1464 MB/s
[    1.221425] raid6: int64x4  xor()   732 MB/s
[    1.289493] raid6: int64x2  gen()  1361 MB/s
[    1.357546] raid6: int64x2  xor()   619 MB/s
[    1.425616] raid6: int64x1  gen()  1126 MB/s
[    1.493658] raid6: int64x1  xor()   462 MB/s
[    1.493660] raid6: using algorithm neonx4 gen() 3154 MB/s
[    1.493662] raid6: .... xor() 2332 MB/s, rmw enabled
[    1.493665] raid6: using neon recovery algorithm
[    1.494199] ACPI: Interpreter disabled.
[    1.494465] iommu: Default domain type: Translated
[    1.494562] vgaarb: loaded
[    1.495356] SCSI subsystem initialized
[    1.495582] usbcore: registered new interface driver usbfs
[    1.495615] usbcore: registered new interface driver hub
[    1.495668] usbcore: registered new device driver usb
[    1.495913] pps_core: LinuxPPS API ver. 1 registered
[    1.495916] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.495928] PTP clock support registered
[    1.496049] EDAC MC: Ver: 3.0.0
[    1.496927] NetLabel: Initializing
[    1.496931] NetLabel:  domain hash size = 128
[    1.496933] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.496968] NetLabel:  unlabeled traffic allowed by default
[    1.497392] clocksource: Switched to clocksource arch_sys_counter
[    1.497398] *** VALIDATE bpf ***
[    1.497616] VFS: Disk quotas dquot_6.6.0
[    1.497660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.497699] *** VALIDATE ramfs ***
[    1.497709] *** VALIDATE hugetlbfs ***
[    1.497983] AppArmor: AppArmor Filesystem Enabled
[    1.498026] pnp: PnP ACPI: disabled
[    1.501707] NET: Registered protocol family 2
[    1.502079] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.502152] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.502407] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.502594] TCP: Hash tables configured (established 32768 bind 32768)
[    1.502724] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.502769] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.502904] NET: Registered protocol family 1
[    1.502923] PCI: CLS 0 bytes, default 64
[    1.503048] Trying to unpack rootfs image as initramfs...
[    2.142667] Freeing initrd memory: 15980K
[    2.143408] kvm [1]: IPA Size Limit: 40bits
[    2.143880] kvm [1]: vgic interrupt IRQ1
[    2.143994] kvm [1]: Hyp mode initialized successfully
[    2.357914] Initialise system trusted keyrings
[    2.357944] Key type blacklist registered
[    2.358023] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    2.361691] zbud: loaded
[    2.362640] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.363110] fuse: init (API version 7.31)
[    2.363162] *** VALIDATE fuseblk ***
[    2.363168] *** VALIDATE fuse ***
[    2.363956] Platform Keyring initialized
[    2.378109] Key type asymmetric registered
[    2.378115] Asymmetric key parser 'x509' registered
[    2.378163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    2.378279] io scheduler mq-deadline registered
[    2.378283] io scheduler kyber registered
[    2.378398] io scheduler bfq registered
[    2.381265] GPIO line 447 (usb-hub-reset) hogged as output/high
[    2.384733] EINJ: ACPI disabled.
[    2.391990] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
[    2.393672] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    2.396794] Serial: AMBA driver
[    2.397287] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[    2.397340] printk: console [ttyAML0] enabled
[    2.404529] loop: module loaded
[    2.407369] libphy: Fixed MDIO Bus: probed
[    2.407822] tun: Universal TUN/TAP device driver, 1.6
[    2.408598] thunder_xcv, ver 1.0
[    2.408638] thunder_bgx, ver 1.0
[    2.408676] nicpf, ver 1.0
[    2.409125] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.409127] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.409169] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    2.409172] igb: Copyright (c) 2007-2014 Intel Corporation.
[    2.409223] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    2.409225] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    2.409355] sky2: driver version 1.30
[    2.409835] VFIO - User Level meta-driver version: 0.3
[    2.411619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.411643] ehci-pci: EHCI PCI platform driver
[    2.411684] ehci-platform: EHCI generic platform driver
[    2.411824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.411835] ohci-pci: OHCI PCI platform driver
[    2.411874] ohci-platform: OHCI generic platform driver
[    2.412318] usbcore: registered new interface driver usb-storage
[    2.413807] mousedev: PS/2 mouse device common for all mice
[    2.414358] i2c /dev entries driver
[    2.417134] sdhci: Secure Digital Host Controller Interface driver
[    2.417139] sdhci: Copyright(c) Pierre Ossman
[    2.417325] Synopsys Designware Multimedia Card Interface Driver
[    2.419106] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.420187] ledtrig-cpu: registered to indicate activity on CPUs
[    2.420674] meson-sm: secure-monitor enabled
[    2.420959] hid: raw HID events driver (C) Jiri Kosina
[    2.421081] usbcore: registered new interface driver usbhid
[    2.421083] usbhid: USB HID core driver
[    2.422914] NET: Registered protocol family 10
[    2.423932] Segment Routing with IPv6
[    2.423993] NET: Registered protocol family 17
[    2.424133] 8021q: 802.1Q VLAN Support v1.8
[    2.424175] Key type dns_resolver registered
[    2.424869] registered taskstats version 1
[    2.424876] Loading compiled-in X.509 certificates
[    2.432815] Loaded X.509 cert 'Build time autogenerated kernel key: beadf691ebae3b435db33ddba4498b6653642cc0'
[    2.432949] zswap: loaded using pool lzo/zbud
[    2.433228] Key type ._fscrypt registered
[    2.433231] Key type .fscrypt registered
[    2.433233] Key type fscrypt-provisioning registered
[    2.434986] Btrfs loaded, crc32c=crc32c-generic
[    2.435050] Key type big_key registered
[    2.448423] Key type encrypted registered
[    2.448445] AppArmor: AppArmor sha1 policy hashing enabled
[    2.463209] hctosys: unable to open rtc device (rtc0)
[    2.463594] of_cfs_init
[    2.463657] of_cfs_init: OK
[    2.463679] clk: Not disabling unused clocks
[    2.464099] Freeing unused kernel memory: 1088K
[    2.485464] Run /init as init process
[    2.485468]   with arguments:
[    2.485471]     /init
[    2.485473]   with environment:
[    2.485475]     HOME=/
[    2.485477]     TERM=linux
[    2.485479]     hdmimode=1080p60hz
[    2.485481]     cvbsmode=576cvbs
[    2.485483]     max_freq_a53=1896
[    2.485484]     max_freq_a73=1800
[    2.485486]     voutmode=hdmi
[    2.485488]     disablehpd=false
[    2.485490]     cvbscable=0
[    2.485491]     overscan=100
[    2.659913] 5V: supplied by 12V
[    2.660498] HUB_5V: supplied by 5V
[    2.660678] USB_PWR_EN: supplied by 5V
[    2.660748] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    2.661008] VDDAO_3V3: supplied by 12V
[    2.671945] pwm-regulator: supplied by regulator-dummy
[    2.672107] VCC_3V3: supplied by VDDAO_3V3
[    2.672145] FLASH_1V8: supplied by VCC_3V3
[    2.672173] VCC_1V8: supplied by VCC_3V3
[    2.672198] VDDAO_1V8: supplied by VDDAO_3V3
[    2.672355] pwm-regulator: supplied by regulator-dummy
[    2.681006] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    2.681013] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    2.681096] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    2.681103] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    2.684351] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    2.684359] meson8b-dwmac ff3f0000.ethernet:         DWMAC1000
[    2.684363] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    2.684367] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    2.684370] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    2.684373] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    2.684376] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    2.684402] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    2.684405] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    2.684408] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.684699] libphy: stmmac: probed
[    2.686097] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    2.688407] meson-vrtc ff8000a8.rtc: registered as rtc0
[    2.710489] libphy: mdio_mux: probed
[    2.736192] mmc0: new high speed SDHC card at address b368
[    2.736872] mmcblk0: mmc0:b368 CBADS 30.0 GiB
[    2.742832]  mmcblk0: p1
[    2.769523] libphy: mdio_mux: probed
[    2.780733] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    2.780740] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    2.783757] dwc2 ff400000.usb: ff400000.usb supply vusb_d not found, using dummy regulator
[    2.783837] dwc2 ff400000.usb: ff400000.usb supply vusb_a not found, using dummy regulator
[    2.783994] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    2.784613] dwc3 ff500000.usb: Failed to get clk 'ref': -2
[    2.784956] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.784977] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.785087] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    2.785123] xhci-hcd xhci-hcd.1.auto: irq 28, io mem 0xff500000
[    2.785295] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    2.785300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.785304] usb usb1: Product: xHCI Host Controller
[    2.785308] usb usb1: Manufacturer: Linux 5.6.15-meson64 xhci-hcd
[    2.785311] usb usb1: SerialNumber: xhci-hcd.1.auto
[    2.785663] hub 1-0:1.0: USB hub found
[    2.785682] hub 1-0:1.0: 2 ports detected
[    2.785901] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.785911] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.785930] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.785968] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.786022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    2.786027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.786031] usb usb2: Product: xHCI Host Controller
[    2.786034] usb usb2: Manufacturer: Linux 5.6.15-meson64 xhci-hcd
[    2.786038] usb usb2: SerialNumber: xhci-hcd.1.auto
[    2.786348] hub 2-0:1.0: USB hub found
[    2.786366] hub 2-0:1.0: 1 port detected
[    2.789268] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.789311] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.792285] async_tx: api initialized (async)
[    2.872728] random: fast init done
[    3.125397] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.204360] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    3.275744] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[    3.275749] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.275751] usb 1-1: Product: USB2.1 Hub
[    3.275753] usb 1-1: Manufacturer: GenesysLogic
[    3.330191] hub 1-1:1.0: USB hub found
[    3.330407] hub 1-1:1.0: 4 ports detected
[    3.401512] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.424017] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[    3.424022] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.424024] usb 2-1: Product: USB3.1 Hub
[    3.424026] usb 2-1: Manufacturer: GenesysLogic
[    3.442139] hub 2-1:1.0: USB hub found
[    3.442419] hub 2-1:1.0: 4 ports detected
[    3.549396] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[    3.697880] usb 1-2: New USB device found, idVendor=2013, idProduct=025f, bcdDevice= 1.00
[    3.697885] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.697887] usb 1-2: Product: PCTV 292e
[    3.697889] usb 1-2: Manufacturer: PCTV
[    3.697891] usb 1-2: SerialNumber: 0011356964
[    3.980155] systemd[1]: System time before build time, advancing clock.
[    4.001941] systemd[1]: Inserted module 'autofs4'
[    4.054015] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.054253] systemd[1]: Detected architecture arm64.
[    4.079692] systemd[1]: Set hostname to <odroidn2>.
[    4.529439] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.550227] usb 2-1.3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    4.550230] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    4.550233] usb 2-1.3: Product: Ugreen Storage Device
[    4.550236] usb 2-1.3: Manufacturer: Ugreen
[    4.550239] usb 2-1.3: SerialNumber: 022003254669
[    4.753812] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    5.145043] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[    5.155319] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[    5.193619] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    5.237470] random: systemd: uninitialized urandom read (16 bytes read)
[    5.242920] random: systemd: uninitialized urandom read (16 bytes read)
[    5.250375] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.251167] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.251462] systemd[1]: Listening on udev Kernel Socket.
[    5.251664] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.296425] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    5.391591] RPC: Registered named UNIX socket transport module.
[    5.391620] RPC: Registered udp transport module.
[    5.391622] RPC: Registered tcp transport module.
[    5.391624] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.448221] systemd-journald[1528]: Received request to flush runtime journal from PID 1
[    5.516004] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.471874] mc: Linux media interface: v0.10
[    6.497402] Registered IR keymap rc-odroid
[    6.556539] IR NEC protocol handler initialized
[    6.556965] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    6.585510] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    6.585586] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    6.585644] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input0
[    6.585795] meson-ir ff808000.ir: receiver initialized
[    6.608959] videodev: Linux video capture interface: v2.00
[    6.792344] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    6.851461] scsi host0: uas
[    6.852066] usbcore: registered new interface driver uas
[    6.852659] scsi 0:0:0:0: Direct-Access     FUJITSU  MHZ2160BH G2     0    PQ: 0 ANSI: 6
[    6.856026] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    6.856780] sd 0:0:0:0: [sda] Write Protect is off
[    6.856786] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    6.857529] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.857757] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    6.886774] em28xx 1-2:1.0: New device PCTV PCTV 292e @ 480 Mbps (2013:025f, interface 0, class 0)
[    6.886781] em28xx 1-2:1.0: DVB interface 0 found: isoc
[    6.889207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.889214] [drm] No driver support for vblank timestamp query.
[    6.889276] meson-drm ff900000.vpu: CVBS Output connector not available
[    6.907511] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.917452] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    6.917791] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    6.918055] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[    6.918326] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    6.918388] meson-drm ff900000.vpu: [drm] Cannot find any crtc or sizes
[    6.932143] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.940858] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[    6.945604] em28xx 1-2:1.0: chip ID is em28178
[    6.947020] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[    6.947031] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[    6.947036] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[    6.971327]  sda: sda1
[    6.973233] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.372549] BTRFS: device fsid 3ff93dac-88d4-4f43-a4db-5ec6593bbba8 devid 1 transid 857 /dev/sda1 scanned by systemd-udevd (1736)
[    7.477017] BTRFS info (device sda1): disk space caching is enabled
[    7.477022] BTRFS info (device sda1): has skinny extents
[    8.971658] em28xx 1-2:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x8d0cfd04
[    8.971663] em28xx 1-2:1.0: EEPROM info:
[    8.971666] em28xx 1-2:1.0:  microcode start address = 0x0004, boot configuration = 0x01
[    8.977777] em28xx 1-2:1.0:  AC97 audio (5 sample rates)
[    8.977783] em28xx 1-2:1.0:  500mA max power
[    8.977788] em28xx 1-2:1.0:  Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e
[    9.037405] em28xx 1-2:1.0: Identified as PCTV tripleStick (292e) (card=94)
[    9.037413] em28xx 1-2:1.0: dvb set to isoc mode.
[    9.037681] usbcore: registered new interface driver em28xx
[    9.126552] em28xx 1-2:1.0: Binding DVB extension
[    9.301572] i2c i2c-2: Added multiplexed i2c bus 3
[    9.301580] si2168 2-0064: Silicon Labs Si2168-B40 successfully identified
[    9.301582] si2168 2-0064: firmware version: B 4.0.2
[    9.412575] si2157 3-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[    9.412629] dvbdev: DVB: registering new adapter (1-2:1.0)
[    9.412636] em28xx 1-2:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[    9.412643] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[    9.413493] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[    9.416517] em28xx 1-2:1.0: DVB extension successfully initialized
[    9.416525] em28xx: Registered (Em28xx dvb Extension) extension
[    9.466743] em28xx 1-2:1.0: Registering input extension
[    9.505414] Registered IR keymap rc-pinnacle-pctv-hd
[    9.505689] rc rc1: PCTV tripleStick (292e) as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-2/1-2:1.0/rc/rc1
[    9.505770] rc rc1: lirc_dev: driver em28xx registered at minor = 1, scancode receiver, no transmitter
[    9.505834] input: PCTV tripleStick (292e) as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-2/1-2:1.0/rc/rc1/input1
[    9.505917] em28xx 1-2:1.0: Input extension successfully initialized
[    9.505921] em28xx: Registered (Em28xx Input Extension) extension
[   10.597039] random: crng init done
[   10.597053] random: 7 urandom warning(s) missed due to ratelimiting
[   10.640119] NFSD: Using UMH upcall client tracking operations.
[   10.640125] NFSD: starting 90-second grace period (net f0000041)
[   10.768983] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   10.769008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.368814] si2168 2-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[   12.453505] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   12.453516] si2168 2-0064: firmware download failed -5
[   12.679740] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   13.189481] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   13.189654] em28xx 1-2:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (48000000..870000000)
[   13.701830] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   14.198868] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   14.482644] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   14.757415] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   15.071489] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   15.233745] em28xx 1-2:1.0: writing to i2c device at 0xc8 failed (error=-5)
[   71.024067] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
However when it is connected the the USB3 port it looks ok I think, but I still cannot scan any channels in TVHeadend. I'm putting this down to using the small aerial that comes with it at the moment, but I do have an adapter coming so I can connect it the the house aerial. However I thought I would be able to scan for something? (SE UK)

dmesg when connected via USB3:

Code: Select all

stefan@odroidn2:~$ dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.6.15-meson64 (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #20.05.2 SMP PREEMPT Tue Jun 2 20:56:52 CEST 2020
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b5800000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xb5038100-0xb5039fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ed7fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000ed7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] On node 0 totalpages: 972032
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261376 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11104 pages used for memmap
[    0.000000]   DMA32 zone: 710656 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54168 r8192 d31848 u94208
[    0.000000] pcpu-alloc: s54168 r8192 d31848 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956832
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=8964d5d7-4a03-47dd-9d2e-6c6a58d278f4 rootwait rootflags=data=writeback rw clk_ignore_unused rootfstype=ext4 console=ttyAML0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=1080p60hz cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi  disablehpd=false cvbscable=0 overscan=100
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x38864000-0x3c864000] (64MB)
[    0.000000] Memory: 2786984K/3888128K available (13052K kernel code, 1268K rwdata, 5372K rodata, 1088K init, 579K bss, 183640K reserved, 917504K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] random: get_random_bytes called from start_kernel+0x354/0x4e0 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000254] Console: colour dummy device 80x25
[    0.000265] printk: console [tty1] enabled
[    0.000350] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000358] pid_max: default: 32768 minimum: 301
[    0.000444] LSM: Security Framework initializing
[    0.000466] Yama: becoming mindful.
[    0.000543] AppArmor: AppArmor initialized
[    0.000591] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000609] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000652] *** VALIDATE tmpfs ***
[    0.001051] *** VALIDATE proc ***
[    0.001265] *** VALIDATE cgroup ***
[    0.001271] *** VALIDATE cgroup2 ***
[    0.031874] rcu: Hierarchical SRCU implementation.
[    0.042802] EFI services will not be available.
[    0.047924] smp: Bringing up secondary CPUs ...
[    0.080277] Detected VIPT I-cache on CPU1
[    0.080324] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.112787] CPU features: detected: ARM erratum 858921
[    0.112795] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.112803] Detected VIPT I-cache on CPU2
[    0.112825] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.112841] arch_timer: CPU2: Trapping CNTVCT access
[    0.112849] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.144321] Detected VIPT I-cache on CPU3
[    0.144336] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.144342] arch_timer: CPU3: Trapping CNTVCT access
[    0.144348] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.176379] Detected VIPT I-cache on CPU4
[    0.176394] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.176400] arch_timer: CPU4: Trapping CNTVCT access
[    0.176405] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.208435] Detected VIPT I-cache on CPU5
[    0.208450] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.208456] arch_timer: CPU5: Trapping CNTVCT access
[    0.208462] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.208535] smp: Brought up 1 node, 6 CPUs
[    0.208542] SMP: Total of 6 processors activated.
[    0.208548] CPU features: detected: 32-bit EL0 Support
[    0.208553] CPU features: detected: CRC32 instructions
[    0.219246] CPU: All CPU(s) started at EL2
[    0.219292] alternatives: patching kernel code
[    0.221149] devtmpfs: initialized
[    0.231852] Registered cp15_barrier emulation handler
[    0.231864] Registered setend emulation handler
[    0.232266] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.232362] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.252854] xor: measuring software checksum speed
[    0.292513]    8regs     :  2374.000 MB/sec
[    0.332524]    32regs    :  3853.000 MB/sec
[    0.372558]    arm64_neon:  3556.000 MB/sec
[    0.372561] xor: using function: 32regs (3853.000 MB/sec)
[    0.372572] pinctrl core: initialized pinctrl subsystem
[    0.373325] thermal_sys: Registered thermal governor 'fair_share'
[    0.373328] thermal_sys: Registered thermal governor 'bang_bang'
[    0.373331] thermal_sys: Registered thermal governor 'step_wise'
[    0.373334] thermal_sys: Registered thermal governor 'user_space'
[    0.373686] DMI not present or invalid.
[    0.374058] NET: Registered protocol family 16
[    0.375358] DMA: preallocated 256 KiB pool for atomic allocations
[    0.375368] audit: initializing netlink subsys (disabled)
[    0.375507] audit: type=2000 audit(0.372:1): state=initialized audit_enabled=0 res=1
[    0.376635] cpuidle: using governor menu
[    0.376977] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.377087] ASID allocator initialised with 65536 entries
[    0.377908] Serial: AMBA PL011 UART driver
[    0.390765] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.390772] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.390775] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.390778] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.393829] cryptd: max_cpu_qlen set to 1000
[    0.464758] raid6: neonx8   gen()  2769 MB/s
[    0.532834] raid6: neonx8   xor()  1603 MB/s
[    0.600878] raid6: neonx4   gen()  3153 MB/s
[    0.668946] raid6: neonx4   xor()  2331 MB/s
[    0.737017] raid6: neonx2   gen()  2558 MB/s
[    0.805081] raid6: neonx2   xor()  2197 MB/s
[    0.873168] raid6: neonx1   gen()  1928 MB/s
[    0.941220] raid6: neonx1   xor()  1717 MB/s
[    1.009299] raid6: int64x8  gen()  1379 MB/s
[    1.077353] raid6: int64x8  xor()   734 MB/s
[    1.145406] raid6: int64x4  gen()  1464 MB/s
[    1.213464] raid6: int64x4  xor()   732 MB/s
[    1.281524] raid6: int64x2  gen()  1361 MB/s
[    1.349586] raid6: int64x2  xor()   619 MB/s
[    1.417651] raid6: int64x1  gen()  1126 MB/s
[    1.485711] raid6: int64x1  xor()   462 MB/s
[    1.485713] raid6: using algorithm neonx4 gen() 3153 MB/s
[    1.485715] raid6: .... xor() 2331 MB/s, rmw enabled
[    1.485718] raid6: using neon recovery algorithm
[    1.486269] ACPI: Interpreter disabled.
[    1.486532] iommu: Default domain type: Translated
[    1.486672] vgaarb: loaded
[    1.487425] SCSI subsystem initialized
[    1.487603] usbcore: registered new interface driver usbfs
[    1.487637] usbcore: registered new interface driver hub
[    1.487696] usbcore: registered new device driver usb
[    1.487881] pps_core: LinuxPPS API ver. 1 registered
[    1.487883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.487900] PTP clock support registered
[    1.488032] EDAC MC: Ver: 3.0.0
[    1.488887] NetLabel: Initializing
[    1.488891] NetLabel:  domain hash size = 128
[    1.488892] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.488927] NetLabel:  unlabeled traffic allowed by default
[    1.489349] clocksource: Switched to clocksource arch_sys_counter
[    1.489355] *** VALIDATE bpf ***
[    1.489572] VFS: Disk quotas dquot_6.6.0
[    1.489611] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.489650] *** VALIDATE ramfs ***
[    1.489660] *** VALIDATE hugetlbfs ***
[    1.489945] AppArmor: AppArmor Filesystem Enabled
[    1.489983] pnp: PnP ACPI: disabled
[    1.493975] NET: Registered protocol family 2
[    1.494363] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.494438] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.494694] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.494880] TCP: Hash tables configured (established 32768 bind 32768)
[    1.495006] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.495051] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.495180] NET: Registered protocol family 1
[    1.495200] PCI: CLS 0 bytes, default 64
[    1.495347] Trying to unpack rootfs image as initramfs...
[    2.135980] Freeing initrd memory: 15980K
[    2.136717] kvm [1]: IPA Size Limit: 40bits
[    2.137203] kvm [1]: vgic interrupt IRQ1
[    2.137317] kvm [1]: Hyp mode initialized successfully
[    2.352398] Initialise system trusted keyrings
[    2.352425] Key type blacklist registered
[    2.352508] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    2.356284] zbud: loaded
[    2.357283] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.357821] fuse: init (API version 7.31)
[    2.357883] *** VALIDATE fuseblk ***
[    2.357890] *** VALIDATE fuse ***
[    2.358735] Platform Keyring initialized
[    2.373004] Key type asymmetric registered
[    2.373010] Asymmetric key parser 'x509' registered
[    2.373060] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    2.373180] io scheduler mq-deadline registered
[    2.373184] io scheduler kyber registered
[    2.373298] io scheduler bfq registered
[    2.376245] GPIO line 447 (usb-hub-reset) hogged as output/high
[    2.380008] EINJ: ACPI disabled.
[    2.387023] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
[    2.388697] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    2.391111] Serial: AMBA driver
[    2.391556] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[    2.391615] printk: console [ttyAML0] enabled
[    2.399182] loop: module loaded
[    2.402058] libphy: Fixed MDIO Bus: probed
[    2.402503] tun: Universal TUN/TAP device driver, 1.6
[    2.403279] thunder_xcv, ver 1.0
[    2.403324] thunder_bgx, ver 1.0
[    2.403364] nicpf, ver 1.0
[    2.403822] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.403824] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.403866] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    2.403868] igb: Copyright (c) 2007-2014 Intel Corporation.
[    2.403907] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    2.403909] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    2.404056] sky2: driver version 1.30
[    2.404450] VFIO - User Level meta-driver version: 0.3
[    2.406294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.406319] ehci-pci: EHCI PCI platform driver
[    2.406361] ehci-platform: EHCI generic platform driver
[    2.406507] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.406518] ohci-pci: OHCI PCI platform driver
[    2.406564] ohci-platform: OHCI generic platform driver
[    2.407000] usbcore: registered new interface driver usb-storage
[    2.408451] mousedev: PS/2 mouse device common for all mice
[    2.409023] i2c /dev entries driver
[    2.411798] sdhci: Secure Digital Host Controller Interface driver
[    2.411804] sdhci: Copyright(c) Pierre Ossman
[    2.411988] Synopsys Designware Multimedia Card Interface Driver
[    2.413804] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.414886] ledtrig-cpu: registered to indicate activity on CPUs
[    2.415390] meson-sm: secure-monitor enabled
[    2.415668] hid: raw HID events driver (C) Jiri Kosina
[    2.415801] usbcore: registered new interface driver usbhid
[    2.415804] usbhid: USB HID core driver
[    2.417629] NET: Registered protocol family 10
[    2.418566] Segment Routing with IPv6
[    2.418620] NET: Registered protocol family 17
[    2.418709] 8021q: 802.1Q VLAN Support v1.8
[    2.418757] Key type dns_resolver registered
[    2.419423] registered taskstats version 1
[    2.419429] Loading compiled-in X.509 certificates
[    2.427063] Loaded X.509 cert 'Build time autogenerated kernel key: beadf691ebae3b435db33ddba4498b6653642cc0'
[    2.427205] zswap: loaded using pool lzo/zbud
[    2.427462] Key type ._fscrypt registered
[    2.427466] Key type .fscrypt registered
[    2.427468] Key type fscrypt-provisioning registered
[    2.429183] Btrfs loaded, crc32c=crc32c-generic
[    2.429249] Key type big_key registered
[    2.443043] Key type encrypted registered
[    2.443064] AppArmor: AppArmor sha1 policy hashing enabled
[    2.458010] hctosys: unable to open rtc device (rtc0)
[    2.458388] of_cfs_init
[    2.458452] of_cfs_init: OK
[    2.458474] clk: Not disabling unused clocks
[    2.458835] Freeing unused kernel memory: 1088K
[    2.489391] Run /init as init process
[    2.489397]   with arguments:
[    2.489399]     /init
[    2.489401]   with environment:
[    2.489404]     HOME=/
[    2.489406]     TERM=linux
[    2.489408]     hdmimode=1080p60hz
[    2.489410]     cvbsmode=576cvbs
[    2.489412]     max_freq_a53=1896
[    2.489413]     max_freq_a73=1800
[    2.489415]     voutmode=hdmi
[    2.489417]     disablehpd=false
[    2.489419]     cvbscable=0
[    2.489420]     overscan=100
[    2.668462] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    2.669583] 5V: supplied by 12V
[    2.670149] HUB_5V: supplied by 5V
[    2.670366] USB_PWR_EN: supplied by 5V
[    2.670972] VDDAO_3V3: supplied by 12V
[    2.679815] pwm-regulator: supplied by regulator-dummy
[    2.680002] VCC_3V3: supplied by VDDAO_3V3
[    2.680031] FLASH_1V8: supplied by VCC_3V3
[    2.680074] VCC_1V8: supplied by VCC_3V3
[    2.680101] VDDAO_1V8: supplied by VDDAO_3V3
[    2.680318] pwm-regulator: supplied by regulator-dummy
[    2.688608] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    2.688615] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    2.688693] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    2.688699] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    2.690966] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    2.690975] meson8b-dwmac ff3f0000.ethernet:         DWMAC1000
[    2.690980] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    2.690983] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    2.690987] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    2.690990] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    2.690992] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    2.691017] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    2.691020] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    2.691023] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.691333] libphy: stmmac: probed
[    2.698081] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    2.704407] meson-vrtc ff8000a8.rtc: registered as rtc0
[    2.722470] libphy: mdio_mux: probed
[    2.748366] mmc0: new high speed SDHC card at address b368
[    2.749103] mmcblk0: mmc0:b368 CBADS 30.0 GiB
[    2.755088]  mmcblk0: p1
[    2.778036] libphy: mdio_mux: probed
[    2.789138] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    2.789145] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    2.792114] dwc2 ff400000.usb: ff400000.usb supply vusb_d not found, using dummy regulator
[    2.792159] dwc2 ff400000.usb: ff400000.usb supply vusb_a not found, using dummy regulator
[    2.792311] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    2.792891] dwc3 ff500000.usb: Failed to get clk 'ref': -2
[    2.793098] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.793112] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.793228] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    2.793256] xhci-hcd xhci-hcd.1.auto: irq 28, io mem 0xff500000
[    2.793479] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    2.793484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.793487] usb usb1: Product: xHCI Host Controller
[    2.793491] usb usb1: Manufacturer: Linux 5.6.15-meson64 xhci-hcd
[    2.793494] usb usb1: SerialNumber: xhci-hcd.1.auto
[    2.793802] hub 1-0:1.0: USB hub found
[    2.793821] hub 1-0:1.0: 2 ports detected
[    2.794029] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.794041] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.794049] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.794080] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.794134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    2.794139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.794142] usb usb2: Product: xHCI Host Controller
[    2.794146] usb usb2: Manufacturer: Linux 5.6.15-meson64 xhci-hcd
[    2.794149] usb usb2: SerialNumber: xhci-hcd.1.auto
[    2.794399] hub 2-0:1.0: USB hub found
[    2.794415] hub 2-0:1.0: 1 port detected
[    2.795525] async_tx: api initialized (async)
[    2.797241] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.797280] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.887218] random: fast init done
[    3.102696] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    3.129378] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.283711] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[    3.283716] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.283719] usb 1-1: Product: USB2.1 Hub
[    3.283721] usb 1-1: Manufacturer: GenesysLogic
[    3.338299] hub 1-1:1.0: USB hub found
[    3.338535] hub 1-1:1.0: 4 ports detected
[    3.409461] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.431947] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[    3.431952] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.431954] usb 2-1: Product: USB3.1 Hub
[    3.431956] usb 2-1: Manufacturer: GenesysLogic
[    3.450248] hub 2-1:1.0: USB hub found
[    3.450529] hub 2-1:1.0: 4 ports detected
[    3.713355] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[    3.841830] usb 1-1.1: New USB device found, idVendor=2013, idProduct=025f, bcdDevice= 1.00
[    3.841835] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.841838] usb 1-1.1: Product: PCTV 292e
[    3.841840] usb 1-1.1: Manufacturer: PCTV
[    3.841842] usb 1-1.1: SerialNumber: 0011356964
[    3.876116] systemd[1]: System time before build time, advancing clock.
[    3.897918] systemd[1]: Inserted module 'autofs4'
[    3.949969] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.950217] systemd[1]: Detected architecture arm64.
[    3.975649] systemd[1]: Set hostname to <odroidn2>.
[    4.549396] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.570200] usb 2-1.3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    4.570204] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    4.570207] usb 2-1.3: Product: Ugreen Storage Device
[    4.570210] usb 2-1.3: Manufacturer: Ugreen
[    4.570213] usb 2-1.3: SerialNumber: 022003254669
[    4.648926] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    5.040977] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[    5.051385] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[    5.089977] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    5.133994] random: systemd: uninitialized urandom read (16 bytes read)
[    5.139567] random: systemd: uninitialized urandom read (16 bytes read)
[    5.139753] systemd[1]: Listening on udev Kernel Socket.
[    5.140040] systemd[1]: Reached target Swap.
[    5.140200] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.140444] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.226902] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    5.227696] RPC: Registered named UNIX socket transport module.
[    5.227700] RPC: Registered udp transport module.
[    5.227702] RPC: Registered tcp transport module.
[    5.227703] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.382693] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.401186] systemd-journald[1540]: Received request to flush runtime journal from PID 1
[    6.585378] Registered IR keymap rc-odroid
[    6.592371] mc: Linux media interface: v0.10
[    6.617201] IR NEC protocol handler initialized
[    6.645505] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    6.645618] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    6.645679] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input0
[    6.645849] meson-ir ff808000.ir: receiver initialized
[    6.650514] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[    6.656959] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    6.657124] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[    6.657134] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[    6.657143] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[    6.666815] videodev: Linux video capture interface: v2.00
[    6.712132] scsi host0: uas
[    6.712726] usbcore: registered new interface driver uas
[    6.713233] scsi 0:0:0:0: Direct-Access     FUJITSU  MHZ2160BH G2     0    PQ: 0 ANSI: 6
[    6.778909] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    6.800840] em28xx 1-1.1:1.0: New device PCTV PCTV 292e @ 480 Mbps (2013:025f, interface 0, class 0)
[    6.800847] em28xx 1-1.1:1.0: DVB interface 0 found: isoc
[    6.808324] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.813453] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.813457] [drm] No driver support for vblank timestamp query.
[    6.813513] meson-drm ff900000.vpu: CVBS Output connector not available
[    6.841423] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    6.841747] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    6.841998] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[    6.842241] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    6.842272] meson-drm ff900000.vpu: [drm] Cannot find any crtc or sizes
[    6.842704] meson-drm ff900000.vpu: [drm] Cannot find any crtc or sizes
[    6.857483] em28xx 1-1.1:1.0: chip ID is em28178
[    6.933187] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    8.875705] em28xx 1-1.1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x8d0cfd04
[    8.875711] em28xx 1-1.1:1.0: EEPROM info:
[    8.875714] em28xx 1-1.1:1.0:        microcode start address = 0x0004, boot configuration = 0x01
[    8.881957] em28xx 1-1.1:1.0:        AC97 audio (5 sample rates)
[    8.881964] em28xx 1-1.1:1.0:        500mA max power
[    8.881968] em28xx 1-1.1:1.0:        Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e
[    8.941387] em28xx 1-1.1:1.0: Identified as PCTV tripleStick (292e) (card=94)
[    8.941394] em28xx 1-1.1:1.0: dvb set to isoc mode.
[    8.941588] usbcore: registered new interface driver em28xx
[    9.155082] em28xx 1-1.1:1.0: Binding DVB extension
[    9.303136] i2c i2c-2: Added multiplexed i2c bus 3
[    9.303144] si2168 2-0064: Silicon Labs Si2168-B40 successfully identified
[    9.303147] si2168 2-0064: firmware version: B 4.0.2
[    9.371102] si2157 3-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[    9.371142] dvbdev: DVB: registering new adapter (1-1.1:1.0)
[    9.371148] em28xx 1-1.1:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[    9.371154] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[    9.371891] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[    9.386223] em28xx 1-1.1:1.0: DVB extension successfully initialized
[    9.386229] em28xx: Registered (Em28xx dvb Extension) extension
[    9.456148] em28xx 1-1.1:1.0: Registering input extension
[    9.497342] Registered IR keymap rc-pinnacle-pctv-hd
[    9.497619] rc rc1: PCTV tripleStick (292e) as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc1
[    9.497694] rc rc1: lirc_dev: driver em28xx registered at minor = 1, scancode receiver, no transmitter
[    9.497756] input: PCTV tripleStick (292e) as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc1/input1
[    9.497830] em28xx 1-1.1:1.0: Input extension successfully initialized
[    9.497833] em28xx: Registered (Em28xx Input Extension) extension
[   10.373907] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   10.373933] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.543212] NFSD: Using UMH upcall client tracking operations.
[   10.543219] NFSD: starting 90-second grace period (net f0000041)
[   10.576017] random: crng init done
[   10.576025] random: 7 urandom warning(s) missed due to ratelimiting
[   12.253151] si2168 2-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[   12.731795] si2168 2-0064: firmware version: B 4.0.25
[   12.735843] si2157 3-0060: found a 'Silicon Labs Si2157-A30'
[   12.783849] si2157 3-0060: firmware version: 3.0.5
[   12.783886] em28xx 1-1.1:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (48000000..870000000)
[   12.788772] si2168 2-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[   13.324464] si2168 2-0064: firmware version: B 4.0.25
[   37.872507] sd 0:0:0:0: tag#13 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[   37.872517] sd 0:0:0:0: tag#13 CDB: opcode=0x9e, sa=0x10 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00
[   37.888494] scsi host0: uas_eh_device_reset_handler start
[   37.969551] usb 2-1.3: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   37.998537] scsi host0: uas_eh_device_reset_handler success
[   38.005523] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   38.005789] sd 0:0:0:0: [sda] Write Protect is off
[   38.005827] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[   38.006450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.007105] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[   38.500803]  sda: sda1
[   38.502230] sd 0:0:0:0: [sda] Attached SCSI disk
[   38.845904] BTRFS: device fsid 3ff93dac-88d4-4f43-a4db-5ec6593bbba8 devid 1 transid 855 /dev/sda1 scanned by systemd-udevd (2866)
[   38.984570] BTRFS info (device sda1): disk space caching is enabled
[   38.984577] BTRFS info (device sda1): has skinny extents
I'd like to have it connected to the USB2 OTG port instead of the USB3, is this possible?
Do the USB3 logs look correct?

Thanks!

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

If you leave it running on USB3 for long enough...

Code: Select all

[25447.907146] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25449.139079] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25450.370889] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25451.603040] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25452.834883] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25454.066714] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25455.298670] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25456.530875] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25457.762646] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25458.994567] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25460.226379] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25461.458377] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25462.690228] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25463.922293] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25465.154143] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25466.402123] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25467.650120] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25468.898165] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25470.145875] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25471.394078] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25472.626004] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25473.857695] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25475.089640] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25476.321653] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25477.553640] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25478.785598] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25480.017482] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25481.249286] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25482.481258] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25483.713216] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25484.945158] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25486.177037] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25487.409010] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25488.640990] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25489.888409] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25491.136465] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25492.384931] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25493.616610] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25494.848580] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25496.080481] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25497.312439] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25498.544622] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25499.776344] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25501.008347] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25502.240215] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
[25503.472171] em28xx 1-1.1:1.0: writing to i2c device at 0xc8 failed (error=-5)
Etc...

User avatar
odroid
Site Admin
Posts: 35901
Joined: Fri Feb 22, 2013 11:14 pm
languages_spoken: English, Korean
ODROIDs: ODROID
Has thanked: 1316 times
Been thanked: 912 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by odroid »

Try a legacy kernel 4.9 instead of 5.6.

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Hi, I've tried to use Armbian_20.05.2_Odroidn2_buster_legacy_4.9.219, but I think there is something wrong with BTRFS

Code: Select all

[  159.748004] Unable to handle kernel NULL pointer dereference at virtual address 00000044
[  159.748013] pgd = ffffffc0b8862000
[  159.748018] [0000000000000044] *pgd=0000000000000000, *pud=0000000000000000
[  159.748032] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  159.757147] Modules linked in: cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_ondemand rtc_pcf8563 ir_lirc_codec lirc_dev i2c_meson_master meson_ir nfsd auth_rpcgss firmware nfs_acl lockd media_clock grace sunrpc ip_tables x_tables raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod
[  159.802238] CPU: 0 PID: 3635 Comm: btrfs-transacti Not tainted 4.9.219-meson64 #1
[  159.814539] Hardware name: Hardkernel ODROID-N2 (DT)
[  159.824911] task: ffffffc03cc92940 task.stack: ffffffc0ba57c000
[  159.835808] PC is at __do_page_cache_readahead+0x44/0x298
[  159.846285] LR is at ondemand_readahead+0x138/0x268
[  159.856697] R0  : ffffff80091cc5d0, PFN: 11cc
[  159.867029] pc : [<ffffff80091cc244>] lr : [<ffffff80091cc5d0>] pstate: 20000045
[  159.879365] sp : ffffffc0ba57f530
[  159.889738] x29: ffffffc0ba57f530 x28: 0000000000002856
[  159.903091] x27: 0000000000000170 x26: 000000000000036a
[  159.913522] x25: 0000000000000000 x24: 0000000000000080
[  159.923907] x23: 0000000000001300 x22: 0000000000000000
[  159.934214] x21: 0000000000000000 x20: 0000000000000041
[  159.944445] x19: ffffffc0ba0287a8 x18: 0000000000000fff
[  159.954672] x17: 0000007f8de2a8f8 x16: ffffff800924a1f0
[  159.964923] x15: 000000000000001f x14: 000000007fffffde
[  159.975162] x13: 0000000000000000 x12: 0000000000000000
[  159.985432] x11: 0000000000000001 x10: 0000000000000a00
[  159.995611] x9 : 0000000000000000 x8 : ffffffc0ba4951c0
[  160.005703] x7 : 0000000000000000 x6 : 000000000000003f
[  160.015670] x5 : 000000000000003f x4 : 0000000000000041
[  160.025521] x3 : 0000000000000080 x2 : 0000000000000000
[  160.035281] x1 : ffffffc0ba028630 x0 : ffffff80091cc5d0
[  160.045048]
               SP: 0xffffffc0ba57f4b0:
[  160.064372] f4b0  00000000 00000000 00001300 00000000 00000080 00000000 00000000 00000000
[  160.081768] f4d0  0000036a 00000000 00000170 00000000 00002856 00000000 ba57f530 ffffffc0
[  160.093976] f4f0  091cc5d0 ffffff80 ba57f530 ffffffc0 091cc244 ffffff80 20000045 00000000
[  160.106221] f510  ba57f5b0 ffffffc0 0948184c ffffff80 ffffffff ffffffff ba57f728 ffffffc0
[  160.118446] f530  ba57f600 ffffffc0 091cc5d0 ffffff80 ba495180 ffffffc0 00000000 00000000
[  160.130621] f550  ba0287a8 ffffffc0 00000000 00000000 0000003f 00000000 00000400 00000000
[  160.142765] f570  00000000 00000000 0000036a 00000000 00000170 00000000 00002856 00000000
[  160.154844] f590  00000000 00000000 00000000 00000000 ba0287a8 ffffffc0 09484164 ffffff80
[  160.163644]
               X1: 0xffffffc0ba0285b0:
[  160.170313] 85b0  00000000 00000000 0000036a 00000000 00000000 00000000 0000001b 00000000
[  160.181417] 85d0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  160.189688] 85f0  ba0285f0 ffffffc0 ba0285f0 ffffffc0 00000000 00000000 00000000 00000000
[  160.198001] 8610  ba028610 ffffffc0 ba028610 ffffffc0 00000000 00000000 00000000 00000000
[  160.206303] 8630  00088180 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  160.214627] 8650  09e1f740 ffffff80 c93af000 ffffffc0 ba0287a8 ffffffc0 00000100 00000000
[  160.222939] 8670  00000001 00000000 00040000 00000000 00000000 00000000 00000000 00000000
[  160.231266] 8690  00000000 00000000 00000000 00000000 5ef5b36c 00000000 1b185d29 00000000
[  160.239587]
               X8: 0xffffffc0ba495140:
[  160.246248] 5140  ba495b80 ffffffc0 ba495a49 ffffffc0 00000000 00000000 00000000 00000000
[  160.257366] 5160  00000000 00000000 00007b10 53430707 44433654 00000054 00000000 00000000
[  160.265695] 5180  00000000 00000000 00000080 00000041 00000400 00000000 ffffffff ffffffff
[  160.274000] 51a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  160.282292] 51c0  ba495e40 ffffffc0 00000001 00000000 ba495e48 ffffffc0 ba4952c8 ffffffc0
[  160.290608] 51e0  00000000 00000000 000078c2 002e0201 00000000 00000000 00000000 00000000
[  160.298931] 5200  ba495d80 ffffffc0 ba577e09 ffffffc0 00000000 00000000 00000000 00000000
[  160.307270] 5220  00000000 00000000 0005c0d3 7072010d 78652e63 6a2e6365 006e6f73 00000000
[  160.315631]
               X19: 0xffffffc0ba028728:
[  160.322461] 8728  00000000 00000000 00000000 00000000 ba028738 ffffffc0 ba028738 ffffffc0
[  160.333720] 8748  ba101848 ffffffc0 c93af608 ffffffc0 ba028758 ffffffc0 ba028758 ffffffc0
[  160.342022] 8768  00000000 00000000 00000000 00000000 00000365 00000000 00000000 00000000
[  160.350349] 8788  00000002 00000000 00000000 00000000 09e1fe58 ffffff80 00000000 00000000
[  160.358640] 87a8  ba028630 ffffffc0 02180020 00000000 00000000 00000000 00000000 00000000
[  160.366990] 87c8  00000000 00000000 00000000 00000000 ba0287d8 ffffffc0 ba0287d8 ffffffc0
[  160.375307] 87e8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  160.383605] 8808  00000000 00000000 09e1f670 ffffff80 00000000 00000000 00000000 02420048
[  160.391915]
               X29: 0xffffffc0ba57f4b0:
[  160.398460] f4b0  00000000 00000000 00001300 00000000 00000080 00000000 00000000 00000000
[  160.409329] f4d0  0000036a 00000000 00000170 00000000 00002856 00000000 ba57f530 ffffffc0
[  160.417571] f4f0  091cc5d0 ffffff80 ba57f530 ffffffc0 091cc244 ffffff80 20000045 00000000
[  160.425884] f510  ba57f5b0 ffffffc0 0948184c ffffff80 ffffffff ffffffff ba57f728 ffffffc0
[  160.434200] f530  ba57f600 ffffffc0 091cc5d0 ffffff80 ba495180 ffffffc0 00000000 00000000
[  160.442508] f550  ba0287a8 ffffffc0 00000000 00000000 0000003f 00000000 00000400 00000000
[  160.450828] f570  00000000 00000000 0000036a 00000000 00000170 00000000 00002856 00000000
[  160.459139] f590  00000000 00000000 00000000 00000000 ba0287a8 ffffffc0 09484164 ffffff80

[  160.470325] Process btrfs-transacti (pid: 3635, stack limit = 0xffffffc0ba57c000)
[  160.475317] Stack: (0xffffffc0ba57f530 to 0xffffffc0ba580000)
[  160.481211] f520:                                   ffffffc0ba57f600 ffffff80091cc5d0
[  160.489184] f540: ffffffc0ba495180 0000000000000000 ffffffc0ba0287a8 0000000000000000
[  160.497157] f560: 000000000000003f 0000000000000400 0000000000000000 000000000000036a
[  160.505131] f580: 0000000000000170 0000000000002856 0000000000000000 0000000000000000
[  160.513104] f5a0: ffffffc0ba0287a8 ffffff8009484164 0000000000000000 ffffffc0c93ab000
[  160.521077] f5c0: ffffffc0ba57f728 00000040ffffffff ffffffc0ba57f5f0 ffffff8009219bf0
[  160.529051] f5e0: ffffffc0b99cb200 0000000000000040 ffffffc0ba57f660 ffffff80094f3cf8
[  160.537024] f600: ffffffc0ba57f660 ffffff80091cc908 0000000000000000 ffffffc0ba495180
[  160.544998] f620: ffffffc0ba0287a8 0000000000000000 000000000000003f 0000000001d00000
[  160.552971] f640: ffffffc0b932e200 000000000000036a ffffffc0ba028630 ffffff800aaf3000
[  160.560944] f660: ffffffc0ba57f6a0 ffffff80094f7c28 ffffffc0ba57f718 ffffffc0ba495180
[  160.568918] f680: ffffffc0ba028630 ffffff800aaf3000 ffffffc0c93ab000 ffffffc0ba495180
[  160.576891] f6a0: ffffffc0ba57f790 ffffff80094f81b0 ffffffc0c71d6e00 ffffffc0c71d6e40
[  160.584864] f6c0: 0000000000000000 ffffffc0ba4760e0 ffffffc0b8666000 ffffffc0b932e200
[  160.592838] f6e0: 0000000006038000 ffffffc0ba028630 ffffffc0c925b1d0 0000000000000000
[  160.600811] f700: ffffffc0ba57f720 0000000000000003 ffffffc0ba57f730 ffffffc0ba57f718
[  160.608784] f720: ffffffc0ba57f718 fffffffffffffff5 00000001d0000000 ffffff80094f6b00
[  160.616758] f740: 0000000000000000 0000000000000000 0000000000000000 ffffffc0b99cb200
[  160.624731] f760: ffffffc0c93ab000 ffffffc0ba028630 0000000000000000 0000004000000000
[  160.632704] f780: 0000000000000000 0000000000000001 ffffffc0ba57f7e0 ffffff8009489cb0
[  160.640678] f7a0: ffffff800ab03f30 ffffffc0c71d6e00 ffffffc0c2de4518 ffffffc0c71d6e40
[  160.648651] f7c0: ffffffc0c925b180 ffffffc0b8666000 ffffffc0c925b1b8 ffffffc0c925b190
[  160.656624] f7e0: ffffffc0ba57f870 ffffff8009499164 ffffffc0c71d6e00 ffffffc0b8666c08
[  160.664598] f800: ffffffc0c2de4518 ffffffc0c2de4400 0000000000004000 0000000001d00000
[  160.672571] f820: 0000000000000001 0000000000000000 0000000000000024 ffffffc0c93ae000
[  160.680544] f840: ffffffc0ba57f870 0000000000000000 ffffffc03cc92940 ffffff80090fa6b8
[  160.688518] f860: ffffffc0ba57f860 ffffffc0ba57f860 ffffffc0ba57f960 ffffff8009499dc8
[  160.696491] f880: 0000000000002000 ffffffc0c93ae000 0000000000000000 0000000000000024
[  160.704464] f8a0: 0000000000000000 0000000000000000 0000000000004000 ffffffc0ba57fa68
[  160.712438] f8c0: 0000000000000001 0000000000004000 ffffffc0c93ae000 ffffffc0c2de4400
[  160.720411] f8e0: ffffffc0c93ad000 ffffffc0b8666c0c 0000000000004000 00000001091c5894
[  160.728384] f900: 0000000000004000 ffffffc0c71d6ec4 0000000000000000 0000000200000000
[  160.736358] f920: ffffffc0c2de44d0 ffffffc0ba57fa68 0000000100000002 ffffff8000000000
[  160.744331] f940: 0000000000000000 0000000000000000 0000000000000000 0000000000010000
[  160.752304] f960: ffffffc0ba57f9e0 ffffff8009499fdc 0000000000004000 ffffffc0b8666000
[  160.760277] f980: 0000000000000000 ffffffc0ba07b000 0000000000000000 0000000000000000
[  160.768251] f9a0: 0000000000000005 ffffffc0b86661d0 ffffffc0ba57fb08 ffffffc0c93ae000
[  160.776224] f9c0: 0000000000000000 ffffffc0b8666000 0000000100000000 0000000000000000
[  160.784198] f9e0: ffffffc0ba57fa80 ffffff800947ff6c ffffffc0c93ae000 ffffffc0ba5667a8
[  160.792171] fa00: ffffffc0ba07b000 0000000000000000 ffffffc0c93ae200 ffffffc0ba57fc10
[  160.800144] fa20: 0000000000000000 0000000000000000 ffffffc0ba57fb08 0000000000000000
[  160.808118] fa40: 0000000000000000 0000000000000161 00000002ba57fa80 0000000000000000
[  160.816091] fa60: ffffffc0c93ae000 0000000000000000 00000000000000a8 ffffff8009103000
[  160.824064] fa80: ffffffc0ba57fb20 ffffff80094804cc ffffffc0ba07b000 ffffffc0ba5667a8
[  160.832037] faa0: ffffffc0c93ae000 ffffffc0ba57fc10 0000000000000000 0000000000000000
[  160.840011] fac0: 0000000000000000 0000000000000003 0000000000000000 ffffffc0ba476070
[  160.847984] fae0: ffffffc0ba5667a8 00000000ba07bfa0 ffffffc0ba5667a8 0000000000000000
[  160.855957] fb00: 00000000ba57fb20 0000000000000100 0000000000000001 ffffffc0ba566700
[  160.863931] fb20: ffffffc0ba57fb70 ffffff8009483bcc 0000000000000002 ffffffc0c93ae000
[  160.871904] fb40: ffffffc0ba57fcd0 00000040ffffffff 00000000ffffffff 0000000000000000
[  160.879878] fb60: ffffffc0ba07b000 ffffffc0c93ae000 ffffffc0ba57fc30 ffffff80094a10a8
[  160.887851] fb80: ffffffc0ba57fcd0 0000000000000001 ffffffc0ba476070 ffffffc0ba07b000
[  160.895824] fba0: ffffffc0c93ae000 ffffffc0ba07b000 ffffffc0b9926048 0000000000000000
[  160.903798] fbc0: 0000000000000000 0000000000000000 0000000000000277 ffffff800910303c
[  160.911771] fbe0: 0000000100000000 0000000000000000 ffffffc0ba07b000 0000000100000000
[  160.919744] fc00: ffffffc0ba57fc40 000000030950753c ffffffc0ba5667a8 0000000000000000
[  160.927718] fc20: ffffffc0ba57fc40 ffffff8009507544 ffffffc0ba57fc90 ffffff80095076d4
[  160.935691] fc40: ffffffc0b9926000 ffffffc0ba476070 00000000ffffffff ffffffc0ba476070
[  160.943665] fc60: ffffffc0c93ae000 ffffffc0ba476070 ffffffc0ba07b000 00000000ffffffff
[  160.951637] fc80: 0000000000000000 0000000000000000 ffffffc0ba57fd00 ffffff8009507d30
[  160.959611] fca0: ffffffc0b9926000 ffffffc0c93ae000 00000000ffffffff ffffffc0ba476070
[  160.967584] fcc0: ffffffc0ba07b000 00000000ffffffff 0000000000000100 0000000000000001
[  160.975558] fce0: ffffffc0ba57fd00 ffffff8009507ce4 ffffffc0b9926000 ffffffc0c93ab000
[  160.983531] fd00: ffffffc0ba57fd50 ffffff80095082c4 ffffffc0ba07b000 ffffffc0c93ab000
[  160.991504] fd20: 0000000000000000 ffffffc0ba108000 0000000000000001 00000000000000fa
[  160.999477] fd40: 0000000000000000 0000000000000000 ffffffc0ba57fd70 ffffff80094abc6c
[  161.007451] fd60: ffffffc0ba07b000 ffffffc0c93ab000 ffffffc0ba57fde0 ffffff80094a71fc
[  161.015424] fd80: ffffffc0c93ab000 0000000000001d4c 0000000000000000 ffffffc03cc92940
[  161.023398] fda0: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
[  161.031371] fdc0: ffffffc0ba57fde0 ffffff80094a71b8 ffffffc0c93ab000 ffffff80094a70e0
[  161.039345] fde0: ffffffc0ba57fe20 ffffff80090ca120 ffffffc0c91c5d40 ffffffc03cc92940
[  161.047318] fe00: ffffff800a13c2d8 ffffffc0c93ab000 ffffff80094a7068 0000000000000000
[  161.055291] fe20: 0000000000000000 ffffff8009083960 ffffff80090ca048 ffffffc0c91c5d40
[  161.063264] fe40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.071238] fe60: ffffffc0ba57fea0 0000000000000000 ffffffc03cc93700 ffffffc0c93ab000
[  161.079211] fe80: 0000000000000000 0000000000000000 ffffffc0ba57fe90 ffffffc0ba57fe90
[  161.087185] fea0: 0000000000000000 ffffff8000000000 ffffffc0ba57feb0 ffffffc0ba57feb0
[  161.095157] fec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.103131] fee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.111104] ff00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.119078] ff20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.127051] ff40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.135025] ff60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.142997] ff80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.150971] ffa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.158944] ffc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000
[  161.166918] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.174890] Call trace:
[  161.177719] Exception stack(0xffffffc0ba57f360 to 0xffffffc0ba57f490)
[  161.184078] f360: ffffffc0ba0287a8 0000007fffffffff ffffffc0ba57f530 ffffff80091cc244
[  161.192051] f380: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.200025] f3a0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  161.207998] f3c0: 0000000000000000 0000000000000000 ffffffc0ba57f410 ffffff80094c67c4
[  161.215971] f3e0: ffffffc0ba57f400 ffffff80094c9ff4 ffffffc0ba57f440 ffffff80094a58d4
[  161.223944] f400: ffffff80091cc5d0 ffffffc0ba028630 0000000000000000 0000000000000080
[  161.231917] f420: 0000000000000041 000000000000003f 000000000000003f 0000000000000000
[  161.239891] f440: ffffffc0ba4951c0 0000000000000000 0000000000000a00 0000000000000001
[  161.247864] f460: 0000000000000000 0000000000000000 000000007fffffde 000000000000001f
[  161.255837] f480: ffffff800924a1f0 0000007f8de2a8f8
[  161.260867] [<ffffff80091cc244>] __do_page_cache_readahead+0x44/0x298
[  161.267451] [<ffffff80091cc5d0>] ondemand_readahead+0x138/0x268
[  161.273519] [<ffffff80091cc908>] page_cache_sync_readahead+0x60/0xa0
[  161.280020] [<ffffff80094f7c28>] __load_free_space_cache+0x1d0/0x640
[  161.286518] [<ffffff80094f81b0>] load_free_space_cache+0x118/0x1c0
[  161.292847] [<ffffff8009489cb0>] cache_block_group+0x188/0x3a8
[  161.298826] [<ffffff8009499164>] find_free_extent+0x45c/0x1010
[  161.304804] [<ffffff8009499dc8>] btrfs_reserve_extent+0xb0/0x1c0
[  161.310958] [<ffffff8009499fdc>] btrfs_alloc_tree_block+0x104/0x3b8
[  161.317371] [<ffffff800947ff6c>] __btrfs_cow_block+0x114/0x510
[  161.323352] [<ffffff80094804cc>] btrfs_cow_block+0xcc/0x218
[  161.329071] [<ffffff8009483bcc>] btrfs_search_slot+0x1cc/0x968
[  161.335052] [<ffffff80094a10a8>] btrfs_lookup_inode+0x50/0xe8
[  161.340945] [<ffffff80095076d4>] __btrfs_update_delayed_inode+0x64/0x220
[  161.347792] [<ffffff8009507d30>] __btrfs_run_delayed_items.isra.0+0x160/0x1d8
[  161.355071] [<ffffff80095082c4>] btrfs_run_delayed_items+0x2c/0x38
[  161.361398] [<ffffff80094abc6c>] btrfs_commit_transaction+0x2cc/0x998
[  161.367985] [<ffffff80094a71fc>] transaction_kthread+0x194/0x1b8
[  161.374140] [<ffffff80090ca120>] kthread+0xd8/0xf0
[  161.379079] [<ffffff8009083960>] ret_from_fork+0x10/0x30
[  161.384539] Code: aa0403f4 d503201f f9400261 52826017 (b94046a2)
[  161.390780] ---[ end trace ecde0b3a1b72621c ]---

Code: Select all

$ btrfs --version
btrfs-progs v4.20.1
Regards

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

I've also just tested TVHeadend (V4.2.8) using the PCTV 292e and the tuner totally fails

dmesg

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.219-meson64 (root@builder) (gcc version 6.4.1 20171012 (Linaro GCC 6.4-2017.11) ) #1 SMP PREEMPT Wed Jun 3 12:42:50 CEST 2020
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
[    0.000000] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000ed800000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: __reserved_mem_alloc_size, start:0x000000007f800000, end:0x0000000080000000, len:8 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x000000007f800000, size 8 MiB
[    0.000000] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000e5800000, size 128 MiB
[    0.000000] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000e3000000, size 40 MiB
[    0.000000] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000cfc00000, size 308 MiB
[    0.000000] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000] OF: reserved mem: invalid size property in 'linux,galcore' node.
[    0.000000] cma: Reserved 8 MiB at 0x00000000cf400000
[    0.000000] On node 0 totalpages: 972800
[    0.000000]   DMA zone: 15200 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 972800 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 21 pages/cpu s48280 r8192 d29544 u86016
[    0.000000] pcpu-alloc: s48280 r8192 d29544 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 957600
[    0.000000] Kernel command line: root=UUID=e8ead364-03d8-4038-8cfd-0d726e3614b1 rootwait rootflags=data=writeback rw rootfstype=ext4 console=ttyS0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=1080p60hz cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi  disablehpd=false cvbscable=0 overscan=100
[    0.000000] vout: get hdmimode: 1080p60hz
[    0.000000] vout: get cvbsmode: 576cvbs
[    0.000000] [get_max_freq_a53] - max_freq : 1896000
[    0.000000] [get_max_freq_a73] - max_freq : 1800000
[    0.000000] hdmitx: voutmode : 1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3275880K/3891200K available (13692K kernel code, 1906K rwdata, 5436K rodata, 5248K init, 1368K bss, 107416K reserved, 507904K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000]       .text : 0xffffff8009080000 - 0xffffff8009de0000   ( 13696 KB)
[    0.000000]     .rodata : 0xffffff8009de0000 - 0xffffff800a340000   (  5504 KB)
[    0.000000]       .init : 0xffffff800a340000 - 0xffffff800a860000   (  5248 KB)
[    0.000000]       .data : 0xffffff800a860000 - 0xffffff800aa3ca00   (  1907 KB)
[    0.000000]        .bss : 0xffffff800aa3ca00 - 0xffffff800ab92b0c   (  1369 KB)
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf03b60000   (    59 MB actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc0ed800000   (  3800 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GPIO-INTC: support to detect double-edge trigger signal
[    0.000000] g12a_aoclkc_init: register ao clk ok!
[    0.000000] Meson chip version = RevA (29:A - 40:0)
[    0.000000] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000] meson_g12a_gpu_init: register meson gpu clk
[    0.000000] meson_g12a_media_init: register meson media clk
[    0.000000] meson_g12a_misc_init: register amlogic g12a misc clks
[    0.000000] meson_g12a_misc_init: done.
[    0.000000] g12a_clkc_init initialization complete
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000035] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
[    0.000599] Console: colour dummy device 80x25
[    0.000612] console [tty1] enabled
[    0.000625] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000632] pid_max: default: 32768 minimum: 301
[    0.000742] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000748] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001332] ftrace: allocating 43132 entries in 169 pages
[    0.071721] sched-energy: Sched-energy-costs installed from DT
[    0.071728] CPU0: update cpu_capacity 631
[    0.071737] ASID allocator initialised with 65536 entries
[    0.118243] secmon: clear_range:5100000 200000
[    0.118366] EFI services will not be available.
[    0.163971] Detected VIPT I-cache on CPU1
[    0.164018] CPU1: update cpu_capacity 631
[    0.164021] CPU1: Booted secondary processor [410fd034]
[    0.196499] Detected VIPT I-cache on CPU2
[    0.196540] CPU2: update cpu_capacity 920
[    0.196543] CPU2: Booted secondary processor [410fd092]
[    0.228049] Detected VIPT I-cache on CPU3
[    0.228071] CPU3: update cpu_capacity 920
[    0.228073] CPU3: Booted secondary processor [410fd092]
[    0.260116] Detected VIPT I-cache on CPU4
[    0.260138] CPU4: update cpu_capacity 920
[    0.260140] CPU4: Booted secondary processor [410fd092]
[    0.292188] Detected VIPT I-cache on CPU5
[    0.292210] CPU5: update cpu_capacity 920
[    0.292212] CPU5: Booted secondary processor [410fd092]
[    0.292299] Brought up 6 CPUs
[    0.292304] SMP: Total of 6 processors activated.
[    0.292311] CPU features: detected feature: 32-bit EL0 Support
[    0.292599] CPU: All CPU(s) started at EL2
[    0.292623] alternatives: patching kernel code
[    0.294517] devtmpfs: initialized
[    0.303002] DMI not present or invalid.
[    0.303170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.303180] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.303310] xor: measuring software checksum speed
[    0.340039]    8regs     :  3382.000 MB/sec
[    0.380084]    8regs_prefetch:  2912.000 MB/sec
[    0.420129]    32regs    :  3888.000 MB/sec
[    0.460173]    32regs_prefetch:  3785.000 MB/sec
[    0.460175] xor: using function: 32regs (3888.000 MB/sec)
[    0.460182] pinctrl core: initialized pinctrl subsystem
[    0.460772] NET: Registered protocol family 16
[    0.461714] schedtune: init normalization constants...
[    0.461721] schedtune: CLUSTER[0-1]      min_pwr:     0 max_pwr:    42
[    0.461724] schedtune: CPU[0]            min_pwr:     0 max_pwr:   279
[    0.461727] schedtune: CPU[1]            min_pwr:     0 max_pwr:   279
[    0.461730] schedtune: CLUSTER[2-5]      min_pwr:     0 max_pwr:    64
[    0.461732] schedtune: CPU[2]            min_pwr:     0 max_pwr:   759
[    0.461735] schedtune: CPU[3]            min_pwr:     0 max_pwr:   759
[    0.461737] schedtune: CPU[4]            min_pwr:     0 max_pwr:   759
[    0.461739] schedtune: CPU[5]            min_pwr:     0 max_pwr:   759
[    0.461741] schedtune: SYSTEM            min_pwr:     0 max_pwr:  3700
[    0.461744] schedtune: using normalization constants mul: 459677581 sh1: 1 sh2: 11
[    0.461745] schedtune: verify normalization constants...
[    0.461747] schedtune: max_pwr/2^0: 3700 => norm_pwr:  1024
[    0.461749] schedtune: max_pwr/2^1: 1850 => norm_pwr:   512
[    0.461751] schedtune: max_pwr/2^2:  925 => norm_pwr:   256
[    0.461753] schedtune: max_pwr/2^3:  462 => norm_pwr:   127
[    0.461755] schedtune: max_pwr/2^4:  231 => norm_pwr:    63
[    0.461757] schedtune: max_pwr/2^5:  115 => norm_pwr:    31
[    0.461759] schedtune: configured to support 5 boost groups
[    0.476340] cpuidle: using governor menu
[    0.476392] register canvas platform driver
[    0.476412] register rdma platform driver
[    0.476433] aml_vdac_init: module init
[    0.477328] vdso: 2 pages (1 code @ ffffff8009de7000, 1 data @ ffffff800a865000)
[    0.477337] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.478691] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.478813] clkmsr: clkmsr: driver init
[    0.478814] codec_mm_module_init
[    0.478829] media_configs_system_init
[    0.479090] pstore: using zlib compression
[    0.479108] console [pstore-1] enabled
[    0.479110] pstore: Registered ramoops as persistent store backend
[    0.479113] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.480164] aml_iomap: amlogic iomap probe done
[    0.480398] vpu: driver version: v20190329(8-g12b)
[    0.480402] vpu: load vpu_clk: 666666667Hz(7)
[    0.480562] vpu: clktree_init
[    0.480595] vpu: vpu_probe OK
[    0.483186] clkmsr: msr_clk_reg0=ffffff800837e004,msr_clk_reg2=ffffff800845100c
[    0.483192] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.485483] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
[    0.485594] aml_vdac_probe: ok
[    0.485674] canvas_probe reg=00000000ff638000,size=2000
[    0.485682] canvas maped reg_base =ffffff8008454000
[    0.489277] rdma_probe,cpu_type:1, ver:0, len:8
[    0.489462] rdma_register, rdma_table_addr ffffff8008475000 rdma_table_addr_phy cf600000 reg_buf ffffffc0ca2f8000
[    0.489465] rdma_register success, handle 1 table_size 32768
[    0.489468] set_rdma_handle video rdma handle = 1.
[    0.489980] aml_snd_reg_map[0], reg:ff640000, size:2000
[    0.489987] aml_snd_reg_map[1], reg:ff642000, size:2000
[    0.489993] aml_snd_reg_map[2], reg:ff64a000, size:2000
[    0.489998] aml_snd_reg_map[3], reg:ff656000, size:1800
[    0.490008] aml_snd_reg_map[4], reg:ffd01000, size:1000
[    0.490009] amlogic auge_snd_iomap probe done
[    0.491312] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.491370] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.491372] codec_mm_probe ok
[    0.492255] cvbs_out: cvbsout_probe, cpu_id:5,name:meson-g12b-cvbsout
[    0.492263] cvbs_out: clk path:0
[    0.492266] cvbs_out: cvbs trimming.1.v5: 0xa0, 0x0
[    0.492390] vout: vout1: register server: cvbs_vout_server
[    0.492393] cvbs_out: register cvbs module server ok
[    0.492395] vout: vout2: register server: cvbs_vout2_server
[    0.492397] cvbs_out: register cvbs module vout2 server ok
[    0.492401] cvbs_out: chrdev devno 264241152 for disp
[    0.492516] cvbs_out: create cdev cvbs
[    0.492518] cvbs_out: cvbsout_probe OK
[    0.604914] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.672635] raid6: int64x1  gen()   511 MB/s
[    0.740720] raid6: int64x1  xor()   474 MB/s
[    0.808770] raid6: int64x2  gen()   789 MB/s
[    0.876856] raid6: int64x2  xor()   592 MB/s
[    0.944961] raid6: int64x4  gen()   939 MB/s
[    1.013018] raid6: int64x4  xor()   693 MB/s
[    1.081093] raid6: int64x8  gen()  1210 MB/s
[    1.149174] raid6: int64x8  xor()   706 MB/s
[    1.217231] raid6: neonx1   gen()  1225 MB/s
[    1.285296] raid6: neonx1   xor()   769 MB/s
[    1.353378] raid6: neonx2   gen()  1583 MB/s
[    1.421443] raid6: neonx2   xor()  1167 MB/s
[    1.489518] raid6: neonx4   gen()  1982 MB/s
[    1.557595] raid6: neonx4   xor()  1552 MB/s
[    1.625680] raid6: neonx8   gen()  2063 MB/s
[    1.693762] raid6: neonx8   xor()  1559 MB/s
[    1.693764] raid6: using algorithm neonx8 gen() 2063 MB/s
[    1.693766] raid6: .... xor() 1559 MB/s, rmw enabled
[    1.693768] raid6: using intx1 recovery algorithm
[    1.694295] SCSI subsystem initialized
[    1.694469] usbcore: registered new interface driver usbfs
[    1.694504] usbcore: registered new interface driver hub
[    1.694571] usbcore: registered new device driver usb
[    1.694645] media: Linux media interface: v0.10
[    1.694669] Linux video capture interface: v2.00
[    1.694735] pps_core: LinuxPPS API ver. 1 registered
[    1.694737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.694750] PTP clock support registered
[    1.694873] dmi: Firmware registration failed.
[    1.695107] secmon: reserve_mem_size:0x300000
[    1.695169] secmon secmon: assigned reserved memory node linux,secmon
[    1.695370] secmon: get page:ffffffbf00140000, 5000
[    1.695374] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    1.695376] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    1.695892] hdmitx: system: amhdmitx_probe start
[    1.695894] hdmitx: system: Ver: 20181019
[    1.695915] hdmitx: system: hdmitx_device.chip_type : 11
[    1.695937] hdmitx: system: not find product desc
[    1.695939] hdmitx: system: not find match pwr-ctl
[    1.695966] hdmitx: system: not find drm_amhdmitx
[    1.695981] hdmitx: system: hpd irq = 41
[    1.696067] hdmitx: system: hdcp22_tx_skp failed to probe
[    1.696070] hdmitx: system: hdcp22_tx_esm failed to probe
[    1.696335] vout: vout1: register server: hdmitx_vout_server
[    1.696338] vout: vout2: register server: hdmitx_vout2_server
[    1.696638] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    1.696652] hdmitx: hdmitx20: Mapped PHY: 0xff634400
[    1.696660] hdmitx: hdmitx20: Mapped PHY: 0xff900000
[    1.696674] hdmitx: hdmitx20: Mapped PHY: 0xff800000
[    1.696677] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
[    1.696680] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    1.696682] hdmitx: hdmitx20: Mapped PHY: 0xff608000
[    1.696685] hdmitx: hdmitx20: Mapped PHY: 0xff600000
[    1.696688] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
[    1.696694] hdmitx: hw: alread display in uboot 0x10
[    1.696715] hdmitx: hw: avmute set to 1
[    1.696771] hdmitx: system: amhdmitx_probe end
[    1.697258] vout: create vout attribute OK
[    1.697341] vout: vout_fops_create OK
[    1.697344] vout: vout1: register server: nulldisp_vout_server
[    1.697361] hdmitx: hdmitx_set_current_vmode[3659]
[    1.697363] hdmitx: system: recalc before 1080p60hz 60 1
[    1.697367] hdmitx: system: recalc after 1080p60hz 2997 50
[    1.697368] hdmitx: alread display in uboot
[    1.697370] vout: init mode 1080p60hz set ok
[    1.697421] vout: aml_tvout_mode_monitor
[    1.697428] vout: aml_vout_probe OK
[    1.697561] chip type:0x29
[    1.697859] Advanced Linux Sound Architecture Driver Initialized.
[    1.699509] clocksource: Switched to clocksource arch_sys_counter
[    1.741815] VFS: Disk quotas dquot_6.6.0
[    1.741854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.748136] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[    1.748474] NET: Registered protocol family 2
[    1.748837] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.749009] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.749227] TCP: Hash tables configured (established 32768 bind 32768)
[    1.749273] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.749308] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.749432] NET: Registered protocol family 1
[    1.750923] Unpacking initramfs...
[    2.112496] Freeing initrd memory: 9960K
[    2.118009] hw perfevents: clusterb_enabled = 1
[    2.118015] hw perfevents: cpumasks 0x3, 0x3c
[    2.118036] hw perfevents: cluster A irq = 18
[    2.118057] hw perfevents: cluster B irq = 19
[    2.118102] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.119669] audit: initializing netlink subsys (disabled)
[    2.119701] audit: type=2000 audit(2.072:1): initialized
[    2.120144] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    2.125821] Registering sdcardfs 0.1
[    2.126002] ntfs: driver 2.1.32 [Flags: R/W].
[    2.126329] JFS: nTxBlock = 8192, nTxLock = 65536
[    2.129167] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.133034] NET: Registered protocol family 38
[    2.133041] Key type asymmetric registered
[    2.133044] Asymmetric key parser 'x509' registered
[    2.133167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    2.133295] io scheduler noop registered (default)
[    2.133298] io scheduler deadline registered
[    2.133321] io scheduler cfq registered
[    2.133622] pwm-gpio pwmgpio: 1 gpio pwms loaded
[    2.134241] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
[    2.134446] meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl
[    2.134916] random: fast init done
[    2.134942] random: crng init done
[    2.135111] gpiomem-aml ff634000.gpiomem: Initialised: Registers at 0xff634000
[    2.135171] [drm] Initialized
[    2.135214] mali ffe40000.bifrost: Continuing without Mali regulator control
[    2.135262] mali ffe40000.bifrost: max pp is 2
[    2.135267] mali ffe40000.bifrost: set min pp to default 1
[    2.135270] mali ffe40000.bifrost: min pp is 1
[    2.135273] mali ffe40000.bifrost: min clk  is 4
[    2.135284] mali ffe40000.bifrost: hiu io source  0xffffff80084dd000
[    2.135290] mali ffe40000.bifrost: hiu io source  0xffffff80084df000
[    2.135293] mali ffe40000.bifrost: num of pp used most of time 1
[    2.135297] mali ffe40000.bifrost: clock dvfs cfg table size is 6
[    2.135317] mali ffe40000.bifrost: max clk set 4
[    2.135320] mali ffe40000.bifrost: max clk  is 4
[    2.135323] mali ffe40000.bifrost: turbo clk set to 5
[    2.135325] mali ffe40000.bifrost: turbo clk  is 5
[    2.135329] mali ffe40000.bifrost: default clk set to 4
[    2.135331] mali ffe40000.bifrost: default clk  is 4
[    2.135337] mali ffe40000.bifrost: ====================0====================
               clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[    2.135342] mali ffe40000.bifrost: ====================1====================
               clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[    2.135347] mali ffe40000.bifrost: ====================2====================
               clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[    2.135351] mali ffe40000.bifrost: ====================3====================
               clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[    2.135356] mali ffe40000.bifrost: ====================4====================
               clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    2.135360] mali ffe40000.bifrost: ====================5====================
               clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    2.135363] mali ffe40000.bifrost: clock dvfs table size is 6
[    2.135437] mali_plat=ffffff800a90bb80
[    2.135550] meson_gcooldev is null, no set min status
[    2.135552] gpu cooling register okay with err=0
[    2.135593] meson_gcooldev is null, no set min status
[    2.135595] gpu core cooling register okay with err=0
[    2.135615] shader_present=3, tiler_present=1, l2_present=1
[    2.135699] Mali_pwr_on:gpu_irq : 200
[    2.135902] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
[    2.136296] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
[    2.136948] mali ffe40000.bifrost: Probed as mali0
[    2.137181] Unable to detect cache hierarchy for CPU 0
[    2.140310] loop: module loaded
[    2.140593] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.140884] libphy: Fixed MDIO Bus: probed
[    2.141399]  REG0:Addr = ffffff80084e3540
[    2.141407] Not set  cali_val for REG1
[    2.141663] meson6-dwmac ff3f0000.ethernet: no reset control found
[    2.141666] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    2.141668]  Ring mode enabled
[    2.141670]  DMA HW capability register supported
[    2.141673]  Normal descriptors
[    2.141674]  RX Checksum Offload Engine supported
[    2.141676]  COE Type 2
[    2.141677]  TX Checksum insertion supported
[    2.141679]  Wake-Up On Lan supported
[    2.141705] eth%d: device MAC address 00:1e:06:42:03:f8
[    2.141706]  Enable RX Mitigation via HW Watchdog Timer
[    2.152362] libphy: stmmac: probed
[    2.152369] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    2.152372] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    2.153396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.153399] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.153673] usbcore: registered new interface driver cdc_acm
[    2.153675] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.153706] usbcore: registered new interface driver uas
[    2.153743] usbcore: registered new interface driver usb-storage
[    2.153805] usbcore: registered new interface driver usbserial
[    2.153834] usbcore: registered new interface driver usbserial_generic
[    2.153852] usbserial: USB Serial support registered for generic
[    2.154085] mousedev: PS/2 mouse device common for all mice
[    2.154261] i2c /dev entries driver
[    2.154324] IR IRMP decoder handler initialized
[    2.155996] lirc_helper: wakeupkey 0xffffffff, protocol 0x1
[    2.157166] ledtrig-cpu: registered to indicate activity on CPUs
[    2.157389] hidraw: raw HID events driver (C) Jiri Kosina
[    2.157561] usbcore: registered new interface driver usbhid
[    2.157564] usbhid: USB HID core driver
[    2.157904] value of voltage_tolerance 0
[    2.158362] dvfs [meson_cpufreq_init] - cluster 0 freq 1992000
[    2.158373] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[    2.159197] value of voltage_tolerance 0
[    2.159813] dvfs [meson_cpufreq_init] - cluster 1 freq 1908000
[    2.159815] dvfs [meson_cpufreq_init] - cluster 1 freq 2004000
[    2.159836] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
[    2.159854] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.161692] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.163413] ff803000.serial: clock gate not found
[    2.163433] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80084e9000
[    2.163454] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 33, base_baud = 1500000) is a meson_uart
[    2.163462] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    2.163490] console [ttyS0] enabled
[    2.163974] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80084eb000
[    2.164112] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80084f7080
[    2.165033] gpio-keypad ff800000.gpio_keypad: failed to get gpio index from dts
[    2.165039] gpio-keypad: probe of ff800000.gpio_keypad failed with error -22
[    2.165165] efusekeynum: 1
[    2.165178] efusekeyname:            uuid    offset:     0   size:    32
[    2.165265] efuse efuse: probe OK!
[    2.165963] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[    2.166142] ge2d: ge2d_init_module
[    2.166225] ge2d: ge2d_dev major:236
[    2.166318] ge2d: clock source clk_ge2d_gate ffffffc0ca310440
[    2.166332] ge2d: clock clk_ge2d source ffffffc0ca3104c0
[    2.166339] ge2d: clock source clk_vapb_0 ffffffc0ca310540
[    2.166342] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
[    2.166397] ge2d: ge2d clock is 499 MHZ
[    2.166402] ge2d: find address resource
[    2.166409] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff80086b0000
[    2.166410] ge2d: reserved mem init failed
[    2.166412] ge2d: ge2d: pdev=ffffffc0ca2ae400, irq=45, clk=ffffffc0ca310440
[    2.166431] ge2d: ge2d start monitor
[    2.166460] ge2d: ge2d workqueue monitor start
[    2.166638] amvideom vsync irq: 46
[    2.166928] amvideocap_probe,amvideocap
[    2.166929] use cma buf.
[    2.167013] fb: osd_init_module
[    2.167144] fb: viu vsync irq: 46
[    2.167150] fb: viu2 vsync irq: 55
[    2.167189] 0x000000d8:Y=d8,U=0,V=0
[    2.167190] 0x000000d9:Y=d9,U=0,V=0
[    2.167191] 0x000000da:Y=da,U=0,V=0
[    2.167192] 0x000000db:Y=db,U=0,V=0
[    2.171542] fb: osd_rdma_init: rdma_table p=0xcf608000,op=0xcf608000 , v=0xffffff8008601000
[    2.171558] rdma_register, rdma_table_addr ffffff8008603000 rdma_table_addr_phy cf609000 reg_buf ffffffc0c9d65000
[    2.171560] rdma_register success, handle 2 table_size 4096
[    2.171561] fb: osd_rdma_init:osd rdma handle = 2.
[    2.171567] fb: mem_size: 0x800000
[    2.171568] fb: mem_size: 0x4b80000
[    2.171569] fb: mem_size: 0x100000
[    2.171570] fb: mem_size: 0x100000
[    2.171570] fb: mem_size: 0x800000
[    2.171602] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[    2.171604] fb: reserved memory base:0x000000007f800000, size:800000
[    2.171700] fb: fb def : 1920 1080 1920 2160 32
[    2.171701] fb: init fbdev bpp is:32
[    2.171789] fb: malloc_osd_memory, cma:ffffff800aaf90d8
[    2.171790] fb: malloc_osd_memory, 1288, base:0x000000007f800000, size:8388608
[    2.171799] fb: use ion buffer for fb memory, fb_index=0
[    2.195749] meson-fb meson-fb: create ion_client ffffffc0ca1e13c0, handle=ffffffc0ca310d80
[    2.195753] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
[    2.195756] fb: Frame buffer memory assigned at
[    2.195756] fb:  0, phy: 0x00000000e5800000, vir:0xffffff800ab98000, size=77312K

[    2.195758] fb: logo_index=1,fb_index=0
[    2.195759] fb: ---------------clear fb0 memory ffffff800ab98000
[    2.222557] fb: osd[0] canvas.idx =0x40
[    2.222558] fb: osd[0] canvas.addr=0xe5800000
[    2.222558] fb: osd[0] canvas.width=7680
[    2.222560] fb: osd[0] canvas.height=1080
[    2.222560] fb: osd[0] frame.width=1920
[    2.222561] fb: osd[0] frame.height=1080
[    2.222562] fb: osd[0] out_addr_id =0x1
[    2.269491] Console: switching to colour frame buffer device 240x67
[    2.294746] fb: osd[0] enable: 1 (swapper/0)
[    2.312040] fb: set osd0 reverse as NONE
[    2.328115] fb: osd probe OK
[    2.328288] hdmitx: hdcp: hdmitx_hdcp_init
[    2.328820] vout: vout2: create vout2 attribute OK
[    2.328940] vout: vout2: vout2_fops_create OK
[    2.328944] vout: vout2: register server: nulldisp_vout2_server
[    2.328953] vout: vout2: init mode null set ok
[    2.329105] vout: vout2: clktree_init
[    2.329184] vout: vout2: aml_vout2_probe OK
[    2.329307] DI: di_module_init ok.
[    2.329312] DI: di_module_init: major 509
[    2.329722] deinterlace deinterlace: assigned reserved memory node linux,di_cma
[    2.329728] DI: CMA size 0x2800000.
[    2.329745] pre_irq:70
[    2.329750] post_irq:71
[    2.329752] DI: di_probe allocate rdma channel 0.
[    2.329757] di_get_vpu_clkb: get clk vpu error.
[    2.329759] DI: vpu clkb <334000000, 667000000>
[    2.329800] DI:enable vpu clkb.
[    2.329808] 0x000000dc:Y=dc,U=0,V=0
[    2.329809] 0x000000dd:Y=dd,U=0,V=0
[    2.329811] 0x000000de:Y=de,U=0,V=0
[    2.329812] 0x000000df:Y=df,U=0,V=0
[    2.329814] 0x000000e0:Y=e0,U=0,V=0
[    2.329815] 0x000000e1:Y=e1,U=0,V=0
[    2.329817] 0x000000e2:Y=e2,U=0,V=0
[    2.329818] 0x000000e3:Y=e3,U=0,V=0
[    2.329820] 0x000000f0:Y=f0,U=0,V=0
[    2.329821] 0x000000f1:Y=f1,U=0,V=0
[    2.329824] 0x000000f2:Y=f2,U=0,V=0
[    2.329826] 0x000000f3:Y=f3,U=0,V=0
[    2.329827] 0x000000f4:Y=f4,U=0,V=0
[    2.329829] 0x000000f5:Y=f5,U=0,V=0
[    2.329831] 0x000000f6:Y=f6,U=0,V=0
[    2.329832] 0x000000f7:Y=f7,U=0,V=0
[    2.329835] 0x000000f8:Y=f8,U=0,V=0
[    2.329836] 0x000000f9:Y=f9,U=0,V=0
[    2.329838] 0x000000fa:Y=fa,U=0,V=0
[    2.329839] 0x000000fb:Y=fb,U=0,V=0
[    2.329841] 0x000000fc:Y=fc,U=0,V=0
[    2.329842] 0x000000fd:Y=fd,U=0,V=0
[    2.329845] 0x000000fe:Y=fe,U=0,V=0
[    2.329846] 0x000000ff:Y=ff,U=0,V=0
[    2.329848] 0x0000003a:Y=3a,U=0,V=0
[    2.329849] DI: support multi decoding 254~255~58.
[    2.329969] DI: di_probe:Di use HRTIMER
[    2.330079] di_probe:ok
[    2.330159] vdin_drv_init: major 508
[    2.330434] vdin_drv_init: vdin driver init done
[    2.330438] [viuin..]viuin_init_module viuin module init
[    2.330688] [viuin..]viuin_probe probe ok.
[    2.331137] [RX]-hdmirx: hdmirx_init.
[    2.331141] ESM HLD: Initializing...
[    2.331298] tvin_afe: tvafe_drv_init: major 506
[    2.331601] tvin_afe: tvafe_drv_init.
[    2.331741] tvafe_vbi: vbi: vbi_init.
[    2.331840] amlvid:info: amlvideo_init called
[    2.331842] amlvid:info: amlvideo_create_instance called
[    2.331846] amlvid:info: v4l2_dev.name=:amlvideo-000
[    2.332100] amlvideo-000: V4L2 device registered as video10
[    2.332324] PPMGRDRV: warn: ppmgr module init func called
[    2.332470] PPMGRDRV: err: ppmgr_driver_probe called
[    2.332541] Reserved memory: failed to init DMA memory pool at 0x00000000ed800000, size 0 MiB
[    2.332550] PPMGRDRV: info: ppmgr_dev major:504
[    2.333260] ionvideo-000: V4L2 device registered as video13
[    2.333359] ionvideo-001: V4L2 device registered as video14
[    2.333447] ionvideo-002: V4L2 device registered as video15
[    2.333544] ionvideo-003: V4L2 device registered as video16
[    2.333634] ionvideo-004: V4L2 device registered as video17
[    2.333732] ionvideo-005: V4L2 device registered as video18
[    2.333825] ionvideo-006: V4L2 device registered as video19
[    2.333925] ionvideo-007: V4L2 device registered as video20
[    2.334023] ionvideo-008: V4L2 device registered as video21
[    2.334027] ionvid: info: Video Technology Magazine Ion Video
[    2.334028] ionvid: info: Capture Board ver 1.0 successfully loaded
[    2.334321] aml_vecm_init:module init
[    2.334494]
                VECM probe start
[    2.334730] Can't find  wb_sel.
[    2.334733] hdr:Can't find  cfg_en_osd_100.
[    2.334734] Can't find  tx_op_color_primary.
[    2.334738] amlogic, vecm
[    2.334740] vlock dt support: 1
[    2.334742] vlock dt new_fsm: 0
[    2.334743] vlock dt hwver: 0
[    2.334744] vlock dt phlock_en: 0
[    2.334746] Can't find  vlock_en.
[    2.334747] Can't find  vlock_mode.
[    2.334749] Can't find  vlock_pll_m_limit.
[    2.334750] Can't find  vlock_line_limit.
[    2.334757] param_config vlock_en:1
[    2.334763] vlock_status_init vlock_en:0
[    2.334764] aml_vecm_probe: ok
[    2.334966] reg base = ffffff800860b000
[    2.335755] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    2.336456] meson-mmc: >>>>>>>>hostbase ffffff8008627000, dmode
[    2.336694] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    2.336697] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[    2.375523] meson-mmc: meson_mmc_probe() : success!
[    2.377143] meson-mmc: >>>>>>>>hostbase ffffff8008630000, dmode
[    2.377177] meson-mmc: gpio_cd = 1ca
[    2.385497] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff
[    2.385501] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7
[    2.385509] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1
[    2.385512] meson-mmc: meson_mmc_irq_thread_v3() 616: set 1st retry!
[    2.385513] meson-mmc: retry cmd 1 the 3-th time(s)
[    2.386505] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff
[    2.386506] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7
[    2.386513] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1
[    2.386515] meson-mmc: retry cmd 1 the 2-th time(s)
[    2.387507] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff
[    2.387509] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7
[    2.387515] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1
[    2.387517] meson-mmc: retry cmd 1 the 1-th time(s)
[    2.388532] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff
[    2.388534] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7
[    2.388540] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1
[    2.388543] meson-mmc: Command retried failed line:634, cmd:1
[    2.388604] meson-mmc: actual_clock :0, HHI_nand: 0x80
[    2.388606] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[    2.415529] meson-mmc: meson_mmc_probe() : success!
[    2.415718] amlogic mtd driver init
[    2.416586] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25

[    2.416786] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
[    2.416790] cectx ff80023c.aocec: cecb_ver:0x1
[    2.416792] cectx ff80023c.aocec: line_reg:0x1
[    2.416794] cectx ff80023c.aocec: line_bit:0x3
[    2.416796] cectx ff80023c.aocec: ee_to_ao:0x1
[    2.416897] input: cec_input as /devices/virtual/input/input0
[    2.417022] cectx ff80023c.aocec: not find 'port_num'
[    2.417025] cectx ff80023c.aocec: using cec:1
[    2.417054] cectx ff80023c.aocec: no hdmirx regs
[    2.417056] cectx ff80023c.aocec: no hhi regs
[    2.417063] cectx ff80023c.aocec: not find 'output'
[    2.418521] cectx ff80023c.aocec: irq cnt:2
[    2.418719] cectx ff80023c.aocec: wakeup_reason:0x0
[    2.418760] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[    2.418764] cectx ff80023c.aocec: aml_cec_probe success end
[    2.419038] unifykey: storage in base: 0xffffffc005000000
[    2.419040] unifykey: storage out base: 0xffffffc005040000
[    2.419041] unifykey: storage block base: 0xffffffc005080000
[    2.419042] unifykey: probe done!
[    2.419398] unifykey: aml_unifykeys_init done!
[    2.419465] meson ts init
[    2.419558] tsensor id: 0
[    2.419690] tsensor trim info: 0xda000026!
[    2.419692] tsensor hireboot: 0xc0ff2a70
[    2.419767] meson ts init
[    2.419781] tsensor id: 1
[    2.419846] tsensor trim info: 0xda000061!
[    2.419847] tsensor hireboot: 0xc0ff2a30
[    2.420043] audio_dsp: [dsp]register dsp to char divece(257)
[    2.420224] amaudio: amaudio: driver amaudio init!
[    2.420620] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[    2.421228] sysled: module init
[    2.421453] meson_wdt ffd0f0d0.watchdog: start watchdog
[    2.421456] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    2.421786] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    2.422667] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
[    2.422671] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
[    2.423611] dmc_monitor_probe
[    2.436385] defendkey ff630218.defendkey: Reserved memory is not enough!
[    2.436396] defendkey: probe of ff630218.defendkey failed with error -22
[    2.437316] usbcore: registered new interface driver snd-usb-audio
[    2.438222] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[    2.438283] T9015 acodec used by auge, tdmout:2
[    2.438993] Error: Driver 'spdif-dit' is already registered, aborting...
[    2.439220] asoc debug: aml_audio_controller_probe-116
[    2.440856] asoc-aml-card auge_sound: aml_card_probe, parse error -517
[    2.440859] aml_card_probe error ret:-517
[    2.441263] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
[    2.441276] TDM id 2 i2s2hdmi:0
[    2.441283] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 1, lane_oe_mask_out = 0
[    2.441466] snd_tdm ff642000.audiobus:tdmc: aml_tdm_get_pins error!
[    2.441469] No channel mask node Channel_Mask
[    2.441946] aml_spdif_platform_probe, spdif ID = 0
[    2.442199] SPDIF id 0 asrc_id:0 auto_asrc:0
[    2.442262] spdifout_play_with_zerodata, spdif id:0 enable:0
[    2.442266] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
[    2.442271] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[    2.442277] hdmitx: audio: aout notify format CT_PCM
[    2.442280] spdif_a is set to enable
[    2.442295] aml_spdif_platform_probe, register soc platform
[    2.442322] aml_spdif_platform_probe, spdif ID = 1
[    2.442369] spdifout_play_with_zerodata, spdif id:1 enable:0
[    2.442372] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
[    2.442375] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[    2.442379] spdif_b is set to enable
[    2.442385] aml_spdif_platform_probe, register soc platform
[    2.442912] audio_ddr_mngr: 0, irqs toddr 34, frddr 37
[    2.442914] audio_ddr_mngr: 1, irqs toddr 35, frddr 38
[    2.442915] audio_ddr_mngr: 2, irqs toddr 36, frddr 39
[    2.443112] audiolocker_platform_probe
[    2.444936] Register vad
[    2.445253] Netfilter messages via NETLINK v0.30.
[    2.445339] Initializing XFRM netlink socket
[    2.445719] NET: Registered protocol family 10
[    2.446361] NET: Registered protocol family 17
[    2.446386] Key type dns_resolver registered
[    2.447136] Registered swp emulation handler
[    2.447147] Registered cp15_barrier emulation handler
[    2.447154] Registered setend emulation handler
[    2.447674] registered taskstats version 1
[    2.448790] Btrfs loaded, crc32c=crc32c-generic, assert=on
[    2.448859] BTRFS: selftest: sectorsize: 4096  nodesize: 4096
[    2.448861] BTRFS: selftest: Running btrfs free space cache tests
[    2.448877] BTRFS: selftest: Running extent only tests
[    2.448890] BTRFS: selftest: Running bitmap only tests
[    2.448903] BTRFS: selftest: Running bitmap and extent tests
[    2.448915] BTRFS: selftest: Running space stealing from bitmap to extent
[    2.449482] BTRFS: selftest: Free space cache tests finished
[    2.449483] BTRFS: selftest: Running extent buffer operation tests
[    2.449484] BTRFS: selftest: Running btrfs_split_item tests
[    2.449515] BTRFS: selftest: Running extent I/O tests
[    2.449517] BTRFS: selftest: Running find delalloc tests
[    2.556863] BTRFS: selftest: Running extent buffer bitmap tests
[    2.619567] meson-mmc: card IN
[    2.619570] meson-mmc: normal card in
[    2.620330] BTRFS: selftest: Extent I/O tests finished
[    2.620332] BTRFS: selftest: Running btrfs_get_extent tests
[    2.620432] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.620444] BTRFS: selftest: Running outstanding_extents tests
[    2.620469] BTRFS: selftest: Running qgroup tests
[    2.620470] BTRFS: selftest: Qgroup basic add
[    2.620500] BTRFS: selftest: Qgroup multiple refs test
[    2.620537] BTRFS: selftest: Running free space tree tests
[    2.646116] BTRFS: selftest: sectorsize: 4096  nodesize: 8192
[    2.646118] BTRFS: selftest: Running btrfs free space cache tests
[    2.646121] BTRFS: selftest: Running extent only tests
[    2.646129] BTRFS: selftest: Running bitmap only tests
[    2.646137] BTRFS: selftest: Running bitmap and extent tests
[    2.646146] BTRFS: selftest: Running space stealing from bitmap to extent
[    2.646527] BTRFS: selftest: Free space cache tests finished
[    2.646528] BTRFS: selftest: Running extent buffer operation tests
[    2.646529] BTRFS: selftest: Running btrfs_split_item tests
[    2.646540] BTRFS: selftest: Running extent I/O tests
[    2.646541] BTRFS: selftest: Running find delalloc tests
[    2.743625] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    2.743628] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    2.745579] BTRFS: selftest: Running extent buffer bitmap tests
[    2.809071] BTRFS: selftest: Extent I/O tests finished
[    2.809073] BTRFS: selftest: Running btrfs_get_extent tests
[    2.809159] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.809171] BTRFS: selftest: Running outstanding_extents tests
[    2.809194] BTRFS: selftest: Running qgroup tests
[    2.809196] BTRFS: selftest: Qgroup basic add
[    2.809223] BTRFS: selftest: Qgroup multiple refs test
[    2.809261] BTRFS: selftest: Running free space tree tests
[    2.818090] meson-mmc: actual_clock :0, HHI_nand: 0x80
[    2.818094] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    2.834830] BTRFS: selftest: sectorsize: 4096  nodesize: 16384
[    2.834832] BTRFS: selftest: Running btrfs free space cache tests
[    2.834835] BTRFS: selftest: Running extent only tests
[    2.834842] BTRFS: selftest: Running bitmap only tests
[    2.834850] BTRFS: selftest: Running bitmap and extent tests
[    2.834859] BTRFS: selftest: Running space stealing from bitmap to extent
[    2.835241] BTRFS: selftest: Free space cache tests finished
[    2.835242] BTRFS: selftest: Running extent buffer operation tests
[    2.835243] BTRFS: selftest: Running btrfs_split_item tests
[    2.835255] BTRFS: selftest: Running extent I/O tests
[    2.835256] BTRFS: selftest: Running find delalloc tests
[    2.835559] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    2.835561] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    2.847853] meson-mmc: actual_clock :50000000, HHI_nand: 0x80
[    2.847855] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000254
[    2.847866] sd: new ultra high speed SDR25 SDHC card at address b368
[    2.847868] sd: clock 50000000, 4-bit-bus-width

[    2.848296] mmcblk1: sd:b368 CBADS 30.0 GiB
[    2.849266]  mmcblk1: p1
[    2.934557] BTRFS: selftest: Running extent buffer bitmap tests
[    2.998081] BTRFS: selftest: Extent I/O tests finished
[    2.998082] BTRFS: selftest: Running btrfs_get_extent tests
[    2.998170] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.998183] BTRFS: selftest: Running outstanding_extents tests
[    2.998207] BTRFS: selftest: Running qgroup tests
[    2.998208] BTRFS: selftest: Qgroup basic add
[    2.998236] BTRFS: selftest: Qgroup multiple refs test
[    2.998274] BTRFS: selftest: Running free space tree tests
[    3.023867] BTRFS: selftest: sectorsize: 4096  nodesize: 32768
[    3.023869] BTRFS: selftest: Running btrfs free space cache tests
[    3.023872] BTRFS: selftest: Running extent only tests
[    3.023879] BTRFS: selftest: Running bitmap only tests
[    3.023888] BTRFS: selftest: Running bitmap and extent tests
[    3.023897] BTRFS: selftest: Running space stealing from bitmap to extent
[    3.024279] BTRFS: selftest: Free space cache tests finished
[    3.024280] BTRFS: selftest: Running extent buffer operation tests
[    3.024281] BTRFS: selftest: Running btrfs_split_item tests
[    3.024294] BTRFS: selftest: Running extent I/O tests
[    3.024295] BTRFS: selftest: Running find delalloc tests
[    3.123600] BTRFS: selftest: Running extent buffer bitmap tests
[    3.187114] BTRFS: selftest: Extent I/O tests finished
[    3.187116] BTRFS: selftest: Running btrfs_get_extent tests
[    3.187203] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.187216] BTRFS: selftest: Running outstanding_extents tests
[    3.187241] BTRFS: selftest: Running qgroup tests
[    3.187243] BTRFS: selftest: Qgroup basic add
[    3.187271] BTRFS: selftest: Qgroup multiple refs test
[    3.187310] BTRFS: selftest: Running free space tree tests
[    3.212933] BTRFS: selftest: sectorsize: 4096  nodesize: 65536
[    3.212935] BTRFS: selftest: Running btrfs free space cache tests
[    3.212938] BTRFS: selftest: Running extent only tests
[    3.212946] BTRFS: selftest: Running bitmap only tests
[    3.212954] BTRFS: selftest: Running bitmap and extent tests
[    3.212964] BTRFS: selftest: Running space stealing from bitmap to extent
[    3.213345] BTRFS: selftest: Free space cache tests finished
[    3.213347] BTRFS: selftest: Running extent buffer operation tests
[    3.213348] BTRFS: selftest: Running btrfs_split_item tests
[    3.213362] BTRFS: selftest: Running extent I/O tests
[    3.213363] BTRFS: selftest: Running find delalloc tests
[    3.312679] BTRFS: selftest: Running extent buffer bitmap tests
[    3.376160] BTRFS: selftest: Extent I/O tests finished
[    3.376162] BTRFS: selftest: Running btrfs_get_extent tests
[    3.376252] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.376267] BTRFS: selftest: Running outstanding_extents tests
[    3.376292] BTRFS: selftest: Running qgroup tests
[    3.376294] BTRFS: selftest: Qgroup basic add
[    3.376323] BTRFS: selftest: Qgroup multiple refs test
[    3.376366] BTRFS: selftest: Running free space tree tests
[    3.647551] aml_dai_spdif_probe
[    3.647556] aml_dai_spdif_probe
[    3.647564] set normal 512 fs /4 fs
[    3.647587]   set spdifout clk:6144000, mpll:24576000
[    3.647588]   get spdifout clk:6143997, mpll:24575987
[    3.647593] aml_dai_set_spdif_fmt , fmt 0x4010
[    3.647638] aml_spdif_new spdif_b, clk continuous:1
[    3.647640] spdifout_play_with_zerodata_free, spdif id:1
[    3.647862] asoc-aml-card auge_sound: dit-hifi <-> SPDIF-B mapping ok
[    3.647872] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
[    3.647875] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[    3.647876]  lanes_out_cnt(1), lanes_in_cnt(1)
[    3.647877]  lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[    3.647878]  lanes_lb_cnt(0)
[    3.647879]  slots(2), slot_width(32)
[    3.647885] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0ca18cf18, id(2), clksel(2)
[    3.647887] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    3.648130] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-C mapping ok
[    3.648131] set normal 512 fs /4 fs
[    3.648141]   set spdifout clk:6144000, mpll:24576000
[    3.648143]   get spdifout clk:6143997, mpll:24575987
[    3.648144] aml_dai_set_spdif_fmt , fmt 0x4010
[    3.648177] aml_spdif_new spdif_a, clk continuous:1
[    3.648178] spdifout_play_with_zerodata_free, spdif id:0
[    3.648315] asoc-aml-card auge_sound: dit-hifi <-> SPDIF mapping ok
[    3.648987] snd_card_add_kcontrols card:ffffffc0c3d19018
[    3.648992] effect_v2 is not init
[    3.648993] Not init vad
[    3.648994] Failed to add VAD controls
[    3.649004] eq/drc v1 function enable
[    3.675545] add line-out mute controls
[    3.675896] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    3.678507] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.678516] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.678522] usb: xhci: determined sg_tablesize: 4294967295
[    3.678696] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
[    3.678715] xhci-hcd xhci-hcd.0.auto: irq 23, io mem 0xff500000
[    3.678779] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.678782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.678784] usb usb1: Product: xHCI Host Controller
[    3.678786] usb usb1: Manufacturer: Linux 4.9.219-meson64 xhci-hcd
[    3.678787] usb usb1: SerialNumber: xhci-hcd.0.auto
[    3.679021] hub 1-0:1.0: USB hub found
[    3.679033] hub 1-0:1.0: 2 ports detected
[    3.679166] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.679171] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.679174] usb: xhci: determined sg_tablesize: 4294967295
[    3.679199] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.679234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.679236] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.679238] usb usb2: Product: xHCI Host Controller
[    3.679240] usb usb2: Manufacturer: Linux 4.9.219-meson64 xhci-hcd
[    3.679242] usb usb2: SerialNumber: xhci-hcd.0.auto
[    3.679437] hub 2-0:1.0: USB hub found
[    3.679447] hub 2-0:1.0: 1 port detected
[    3.679694] hctosys: unable to open rtc device (rtc0)
[    3.679864] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0ca11dc00)
[    3.679875] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    3.679885] dwc_otg ff400000.dwc2_a: base=0xffffff800fa00000
[    3.679887] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0b7c25e00
[    3.779997] dwc_otg: Core Release: 3.30a
[    3.780000] dwc_otg: Setting default values for core params
[    3.780006] dwc_otg: curmode: 0, host_only: 0
[    3.780016] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[    3.792137] dwc_otg: Using Buffer DMA mode
[    3.792139] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.792140] dwc_otg: Working on port type = SLAVE
[    3.792143] dwc_otg: Dedicated Tx FIFOs mode
[    3.793430] meson_cdev probe
[    3.793473] meson_cdev index: 0
[    3.793553] meson_cdev index: 1
[    3.793594] thermal: no cluster id, cpucore as one cooldev
[    3.793607] meson_cdev index: 2
[    3.793610] cpucore_cooling_register, max_cpu_core_num:6
[    3.793612] cpucore_cooling_register, clutser[1] core num:4
[    3.793613] cpucore_cooling_register, clutser[0] core num:2
[    3.793661] meson_cdev index: 3
[    3.793673] meson_cdev index: 4
[    3.793697] find tzd id: 0
[    3.793796] find tzd id: 0
[    3.793874] find tzd id: 0
[    3.793916] meson_cdev probe done
[    3.793977] gxbb_pm: enter meson_pm_probe!
[    3.793989] gxbb_pm: meson_pm_probe done
[    3.794143] ALSA device list:
[    3.794145]   #0: AML-AUGESOUND
[    3.795603] Freeing unused kernel memory: 5248K
[    3.943666] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(0) tuning for host cf(xhci_hub_control)--
[    4.003524] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    4.145844] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    4.145847] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.145850] usb 1-1: Product: USB2.1 Hub
[    4.145851] usb 1-1: Manufacturer: GenesysLogic
[    4.159412] hub 1-1:1.0: USB hub found
[    4.159659] hub 1-1:1.0: 4 ports detected
[    4.263628] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.286109] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620
[    4.286113] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.286115] usb 2-1: Product: USB3.1 Hub
[    4.286118] usb 2-1: Manufacturer: GenesysLogic
[    4.287466] hub 2-1:1.0: USB hub found
[    4.287761] hub 2-1:1.0: 4 ports detected
[    4.399546] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[    4.459512] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[    4.599949] usb 1-2: New USB device found, idVendor=2013, idProduct=025f
[    4.599952] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.599954] usb 1-2: Product: PCTV 292e
[    4.599955] usb 1-2: Manufacturer: PCTV
[    4.599957] usb 1-2: SerialNumber: 0011356964
[    4.600672] usb 1-2: Unsupported device
[    5.387577] usb 2-1.3: new SuperSpeed USB device number 3 using xhci-hcd
[    5.408328] usb 2-1.3: New USB device found, idVendor=174c, idProduct=55aa
[    5.408331] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    5.408334] usb 2-1.3: Product: Ugreen Storage Device
[    5.408336] usb 2-1.3: Manufacturer: Ugreen
[    5.408339] usb 2-1.3: SerialNumber: 022003254669
[    5.418361] scsi host0: uas
[    5.426175] scsi 0:0:0:0: Direct-Access     FUJITSU  MHZ2160BH G2     0    PQ: 0 ANSI: 6
[    5.460845] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    5.461596] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.464458] sd 0:0:0:0: [sda] Write Protect is off
[    5.464464] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    5.465269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.465427] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[    5.465432] xhci-hcd xhci-hcd.0.auto: @00000000cf612ca0 00000000 00000000 1b000000 05038001
[    5.466432] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    5.468481] md: linear personality registered for level -1
[    5.472431] md: multipath personality registered for level -4
[    5.476197] md: raid0 personality registered for level 0
[    5.480484] md: raid1 personality registered for level 1
[    5.488047] md: raid6 personality registered for level 6
[    5.488051] md: raid5 personality registered for level 5
[    5.488053] md: raid4 personality registered for level 4
[    5.501695] md: raid10 personality registered for level 10
[    5.528017]  sda: sda1
[    5.532185] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.057514] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    6.786451] systemd[1]: System time before build time, advancing clock.
[    6.804992] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.812059] cgroup: cgroup2: unknown option "nsdelegate"
[    6.826937] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.827646] systemd[1]: Detected architecture arm64.
[    6.836519] systemd[1]: Set hostname to <odroidn2>.
[    6.900002] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    7.791406] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    7.791414] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    7.958780] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    8.070644] systemd[1]: Listening on Journal Socket.
[    8.074522] systemd[1]: Starting Nameserver information manager...
[    8.075792] systemd[1]: Created slice system-getty.slice.
[    8.077543] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.124518] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
[    8.211162] RPC: Registered named UNIX socket transport module.
[    8.211167] RPC: Registered udp transport module.
[    8.211168] RPC: Registered tcp transport module.
[    8.211169] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.216304] register clk_set_setting cpu[41]
[    8.228473] Registered firmware driver success.
[    8.229059] Try to load video/h264_multi.bin  ...
[    8.235776] firmware_codec firmware_vdec: Direct firmware load for video/h264_multi.bin failed with error -2
[    8.235786] Error : -2 can't load the video/h264_multi.bin.
[    8.235788] get data from fsys fail.
[    8.235790] invaild file type.
[    8.236139] Try to load video/h264.bin  ...
[    8.236162] firmware_codec firmware_vdec: Direct firmware load for video/h264.bin failed with error -2
[    8.236166] Error : -2 can't load the video/h264.bin.
[    8.236168] get data from fsys fail.
[    8.236169] invaild file type.
[    8.236516] Try to load video/h265.bin  ...
[    8.236539] firmware_codec firmware_vdec: Direct firmware load for video/h265.bin failed with error -2
[    8.236544] Error : -2 can't load the video/h265.bin.
[    8.236545] get data from fsys fail.
[    8.236546] invaild file type.
[    8.236875] Try to load video/h264_enc.bin  ...
[    8.236893] firmware_codec firmware_vdec: Direct firmware load for video/h264_enc.bin failed with error -2
[    8.236896] Error : -2 can't load the video/h264_enc.bin.
[    8.236897] get data from fsys fail.
[    8.236899] invaild file type.
[    8.242508] Try to load video/video_ucode.bin  ...
[    8.242545] firmware_codec firmware_vdec: Direct firmware load for video/video_ucode.bin failed with error -2
[    8.242548] Error : -2 can't load the video/video_ucode.bin.
[    8.242549] get data from fsys fail.
[    8.242551] invaild file type.
[    8.292986] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    8.434701] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[    8.434708] xhci-hcd xhci-hcd.0.auto: @00000000cf612440 00000000 00000000 1b000000 05038001
[    8.494650] systemd-journald[2067]: Received request to flush runtime journal from PID 1
[    9.135438] Registered IR keymap rc-empty
[    9.135608] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input1
[    9.136584] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
[    9.150042] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011
[    9.150050] meson-ir ff808040.meson-ir: receiver initialized
[    9.180104] ionvid: dbg: ionvideo open
[    9.180243] ionvid: dbg: vidioc_close!!!!
[    9.180250] ionvid: dbg: vidioc_close
[    9.180559] ionvid: dbg: ionvideo open
[    9.180689] ionvid: dbg: ionvideo open
[    9.180705] ionvid: dbg: ionvideo open
[    9.180707] ionvid: dbg: vidioc_close!!!!
[    9.180719] ionvid: dbg: vidioc_close
[    9.180784] ionvid: dbg: vidioc_close!!!!
[    9.180786] ionvid: dbg: vidioc_close!!!!
[    9.180791] ionvid: dbg: vidioc_close
[    9.180792] ionvid: dbg: vidioc_close
[    9.181247] ionvid: dbg: ionvideo open
[    9.181256] ionvid: dbg: ionvideo open
[    9.181346] ionvid: dbg: vidioc_close!!!!
[    9.181351] ionvid: dbg: vidioc_close!!!!
[    9.181352] ionvid: dbg: vidioc_close
[    9.181357] ionvid: dbg: vidioc_close
[    9.181906] ionvid: dbg: ionvideo open
[    9.181907] ionvid: dbg: ionvideo open
[    9.181977] ionvid: dbg: ionvideo open
[    9.182064] ionvid: dbg: vidioc_close!!!!
[    9.182071] ionvid: dbg: vidioc_close
[    9.182076] ionvid: dbg: vidioc_close!!!!
[    9.182078] ionvid: dbg: vidioc_close!!!!
[    9.182087] ionvid: dbg: vidioc_close
[    9.182087] ionvid: dbg: vidioc_close
[    9.244988] lirc_dev: IR Remote Control driver registered, major 499
[    9.285044] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[    9.285048] IR LIRC bridge handler initialized
[    9.352469] rtc-pcf8563 3-0051: low voltage detected, date/time is not reliable.
[    9.352598] rtc-pcf8563 3-0051: rtc core: registered rtc-pcf8563 as rtc0
[    9.504469] em28xx: New device PCTV PCTV 292e @ 480 Mbps (2013:025f, interface 0, class 0)
[    9.504474] em28xx: DVB interface 0 found: isoc
[    9.504907] em28xx: chip ID is em28178
[    9.507446] Fine tdm clk setting range (0~2000000), 12287994
[    9.507603] Fine spdif sysclk setting range(0~2000000), 6143997
[    9.508271] out of value, fixed it
[    9.508292] id=0 set inskew=0
[    9.508392] AED req_sel0 module:TDMOUT_B
[    9.508449] spk_mute_set: mute flag = 0
[    9.692222] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[    9.692501] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.822501] BTRFS: device fsid 3ff93dac-88d4-4f43-a4db-5ec6593bbba8 devid 1 transid 874 /dev/sda1
[   10.213892] nr_pdflush_threads exported in /proc is scheduled for removal
[   11.445583] Fine tdm clk setting range (0~2000000), 12287994
[   11.445718] Fine spdif sysclk setting range(0~2000000), 6143997
[   11.445880] out of value, fixed it
[   11.445902] id=0 set inskew=0
[   11.446034] AED req_sel0 module:TDMOUT_B
[   11.446115] spk_mute_set: mute flag = 0
[   11.463749] Fine tdm clk setting range (0~2000000), 12287994
[   11.463856] Fine spdif sysclk setting range(0~2000000), 6143997
[   11.464002] out of value, fixed it
[   11.464022] id=0 set inskew=0
[   11.464147] AED req_sel0 module:TDMOUT_B
[   11.464217] spk_mute_set: mute flag = 0
[   11.538145] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x8d0cfd04
[   11.538149] em28178 #0: EEPROM info:
[   11.538151] em28178 #0:      microcode start address = 0x0004, boot configuration = 0x01
[   11.544417] em28178 #0:      AC97 audio (5 sample rates)
[   11.544422] em28178 #0:      500mA max power
[   11.544427] em28178 #0:      Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e
[   11.544669] em28178 #0: Identified as PCTV tripleStick (292e) (card=94)
[   11.544674] em28178 #0: dvb set to isoc mode.
[   11.545292] usbcore: registered new interface driver em28xx
[   11.619663] em28178 #0: Binding DVB extension
[   11.674592] i2c i2c-6: Added multiplexed i2c bus 7
[   11.674600] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified
[   11.674604] si2168 6-0064: firmware version: B 4.0.2
[   11.727379] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[   11.727409] DVB: registering new adapter (em28178 #0)
[   11.727418] usb 1-2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   11.727426] dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[   11.728435] dvb_create_media_entity: media entity 'dvb-demux' registered.
[   11.733921] em28178 #0: DVB extension successfully initialized
[   11.733929] em28xx: Registered (Em28xx dvb Extension) extension
[   11.770429] em28178 #0: Registering input extension
[   11.770646] Registered IR keymap rc-pinnacle-pctv-hd
[   11.770848] input: em28xx IR (em28178 #0) as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-2/rc/rc1/input2
[   11.771332] rc rc1: em28xx IR (em28178 #0) as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-2/rc/rc1
[   11.771636] em28178 #0: Input extension successfully initalized
[   11.771641] em28xx: Registered (Em28xx Input Extension) extension
[   12.443407] NFSD: starting 90-second grace period (net ffffff800a9e8280)
[   12.459515] vout: aml_tvout_mode_work: monitor_timeout
[   13.771732] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   13.771763] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.173902] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[   15.675500] si2168 6-0064: firmware version: B 4.0.25
[   15.680552] si2157 7-0060: found a 'Silicon Labs Si2157-A30'
[   15.728777] si2157 7-0060: firmware version: 3.0.5
[   33.521703] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[   62.471727] fb: mem_free_work, free memory: addr:800000
[  611.309051] fb: osd[0] enable: 0 (kworker/0:2)
[  631.712731] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[  632.244206] si2168 6-0064: firmware version: B 4.0.25
Logs from TVHeadend

Code: Select all

2020-06-26 16:11:39.822 mpegts: 746MHz in DVB-T Network - tuning on Silicon Labs Si2168 #0 : DVB-T #0

2020-06-26 16:11:39.822 linuxdvb: Silicon Labs Si2168 #0 : DVB-T #0 - DTV_CLEAR failed [e=Bad address]

2020-06-26 16:11:39.822 mpegts: 618MHz in DVB-T Network - tuning on Silicon Labs Si2168 #0 : DVB-T #0

2020-06-26 16:11:39.822 linuxdvb: Silicon Labs Si2168 #0 : DVB-T #0 - DTV_CLEAR failed [e=Bad address]

2020-06-26 16:11:39.822 mpegts: 650MHz in DVB-T Network - tuning on Silicon Labs Si2168 #0 : DVB-T #0

2020-06-26 16:11:39.822 linuxdvb: Silicon Labs Si2168 #0 : DVB-T #0 - DTV_CLEAR failed [e=Bad address]

etc..

User avatar
rooted
Posts: 8110
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 727 times
Been thanked: 270 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by rooted »

I've had severe issues with my ATSC dongle on an XU4 with 5.4.y and had to go back to the 4 series kernel where it runs for months without issue.

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Hi rooted,

Thanks for your interest in this thread.
Post #4 (BTRFS Issues), and post #5 (Tuner issues) were both using Kernel 4.9.219.

The hardware (N2) seems very capable and powerful, however I'm loosing confidence in the software. I purchased the N2 to take over from an old Windows file sever, so it will be running OMV (probably), Plex, Transmission TVHeadend, and my Home Automation which I will need access to the GPIO/SPI to talk to a RFM96. I think the N2 is more that capable to do this.
It also needs to be stable and reliable.

From my tests, using Armbian 5.6 Kernel it looks like the tuner problems in post #1, and #2 have highlighted that there are issues with the USB which I thought had been fixed? - I will need multiple HDD's on the USB ports.
Going back to Armbian 4.9 kernel BTRFS looks like it is broken (post #4), and I'm not really sure what is wrong with the tuner (post #5).

Using CoreELEC on the N2 is a pleasure and hats off to the guys who have done this! so eventually I will need another N2 if these issues are fixed.

Are my conclusions above correct, or have I missed something very obvious (which is totally possible :) )
In my mind these are fundamental things which should work correctly.

User avatar
rooted
Posts: 8110
Joined: Fri Dec 19, 2014 9:12 am
languages_spoken: english
Location: Gulf of Mexico, US
Has thanked: 727 times
Been thanked: 270 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by rooted »

Could you try the dongle on a PC to verify if it's the device or the driver causing this problem, from your logs it seems like it's the driver.

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

@badger101

Try nightly versions - they are already at 5.7.y ... apt update & upgrade, armbian-config -> switch to nightly ... just beware that it can break the system since its not very well tested.

BTW. Is this dongle working well on some x86 Linux?
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

rooted wrote:
Sun Jun 28, 2020 12:14 am
Could you try the dongle on a PC to verify if it's the device or the driver causing this problem, from your logs it seems like it's the driver.
igorpec wrote:
Sun Jun 28, 2020 1:16 am
BTW. Is this dongle working well on some x86 Linux?
Good questions, I've just tried on a Pi Zero (Sorry, it's the only thing I had laying around!), with the same firmware packages and it works perfectly:
TVHeadend on Pi Zero
TVHeadend on Pi Zero
TV.PNG (1.19 MiB) Viewed 1072 times
igorpec wrote:
Sun Jun 28, 2020 1:16 am
@badger101

Try nightly versions - they are already at 5.7.y ... apt update & upgrade, armbian-config -> switch to nightly ... just beware that it can break the system since its not very well tested.
Hi Igor, thank you for your input.
I'll have a look and see if it is any better, but as I've said I need it to be stable (It will be a clean install though). I cannot have it breaking when everything is moved over. I think I've seen in armbian-config that you can freeze it though.

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

Good questions, I've just tried on a Pi Zero (Sorry, it's the only thing I had laying around!), with the same firmware packages and it works perfectly:
Then probably those drivers has been patched in the Pi kernel ... which have 5000+ contributors and we are just a few. Dive into the code and extract / port fixed driver code or wait that perhaps reaches mainline ...
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

igorpec wrote:
Sun Jun 28, 2020 4:01 am
Good questions, I've just tried on a Pi Zero (Sorry, it's the only thing I had laying around!), with the same firmware packages and it works perfectly:
Then probably those drivers has been patched in the Pi kernel ... which have 5000+ contributors and we are just a few. Dive into the code and extract / port fixed driver code or wait that perhaps reaches mainline ...
No, this firmware is not specific to the Pi. This is 'the' firmware that is used for this tuner in any Linux distro:
http://blog.palosaari.fi/2014/04/naked- ... -292e.html
https://tvheadend.org/boards/4/topics/18170
https://www.linuxtv.org/wiki/index.php/ ... _T2_(292e)

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

No, this firmware is not specific to the Pi. This is 'the' firmware that is used for this tuner in any Linux distro:
Understand. But its not just firmware, but also drivers which need to be alright. Here is a subdir for the device you have - inspect commits here
https://git.kernel.org/pub/scm/linux/ke ... x?h=v5.7.6
https://git.kernel.org/pub/scm/linux/ke ... inux-5.4.y
and on a knowing to work kernel ...
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Thank you igorpec for the links, very interesting. However I'm not sure how that helps.
To my untrained eyes the 292e is in the code (since the start), and supported. I'm sure there are people using it without problems.
Would be interesting to know what the -5 error is and e=Bad address.

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

igorpec wrote:
Sun Jun 28, 2020 1:16 am
Try nightly versions - they are already at 5.7.y ... apt update & upgrade, armbian-config -> switch to nightly ... just beware that it can break the system since its not very well tested.
I've just tried 5.7.6 and it looks like the Ethernet is broken (DMA issues).
Failed to reset DMA
stmmac_hw_setup: DMA engine initialization failed
stmmac_open: Hw setup failed

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

Badger101 wrote:
Mon Jun 29, 2020 8:01 am
igorpec wrote:
Sun Jun 28, 2020 1:16 am
Try nightly versions - they are already at 5.7.y ... apt update & upgrade, armbian-config -> switch to nightly ... just beware that it can break the system since its not very well tested.
I've just tried 5.7.6 and it looks like the Ethernet is broken (DMA issues).
Failed to reset DMA
stmmac_hw_setup: DMA engine initialization failed
stmmac_open: Hw setup failed
Network issues are known, but my device works ... so its one of those strange issues. Anyway, 5.7.y kernel is WIP / DEV ... what about TV tuner? Can you test it?
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Hi igorpec,

When you say you device works, is that an N2?

I'm running Armbian server so it is difficult to test TVHeadend without ethernet! I plugged in my WiFi dongle to see if I could get network connection quickly which didn't work (no firmware).
I'll install Armbian desktop tomorrow, then install TVHeadend, then switch to nightly to see if the tuner works locally with TVHeadend.

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

Badger101 wrote:
Tue Jun 30, 2020 7:01 am
Hi igorpec,

When you say you device works, is that an N2?
Yes, my N2 network card works perfect. Logs from the device http://ix.io/2qv6 (self build image from trunk, should be identical to beta)

When using development not well tested kernels/images, its hard to be certain about anyting ...
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Hi igorpec,

Thank you for the confirmation, and your logs.
Interesting how your N2 works, and mine doesn't on the same nightly build so I did some tests..
I started back with the Armbian_20.05.2_Odroidn2_buster_current_5.6.15.img, manually update/upgrade, and then switched to the nightly build just in case something had gone wrong in the process.

When re-booted the ethernet port still did not work, with the same messages:

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.7.6-meson64 (root@stable) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk.20 SMP PREEMPT Sat Jun 27 18:03:14 UTC 2020
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b5800000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xb5036100-0xb5037fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ed7fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000ed7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] On node 0 totalpages: 972032
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261376 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11104 pages used for memmap
[    0.000000]   DMA32 zone: 710656 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54168 r8192 d31848 u94208
[    0.000000] pcpu-alloc: s54168 r8192 d31848 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956832
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=8964d5d7-4a03-47dd-9d2e-6c6a58d278f4 rootwait  rootflags=data=writeback rw clk_ignore_unused rootfstype=ext4 console=ttyAML0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=custombuilt cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi modeline=1920,1080,148500,56250,50,1920,2448,2492,2640,1080,1084,1089,1125,1,1,1 disablehpd=false cvbscable= overscan=100
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x38abe000-0x3cabe000] (64MB)
[    0.000000] Memory: 2788748K/3888128K available (13628K kernel code, 1254K rwdata, 5456K rodata, 1088K init, 584K bss, 181876K reserved, 917504K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] random: get_random_bytes called from start_kernel+0x35c/0x528 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000270] Console: colour dummy device 80x25
[    0.000282] printk: console [tty1] enabled
[    0.000367] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000375] pid_max: default: 32768 minimum: 301
[    0.000465] LSM: Security Framework initializing
[    0.000488] Yama: becoming mindful.
[    0.000570] AppArmor: AppArmor initialized
[    0.000619] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000636] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002440] rcu: Hierarchical SRCU implementation.
[    0.005796] EFI services will not be available.
[    0.006207] smp: Bringing up secondary CPUs ...
[    0.006841] Detected VIPT I-cache on CPU1
[    0.006889] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.008063] CPU features: detected: ARM erratum 858921
[    0.008071] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.008078] Detected VIPT I-cache on CPU2
[    0.008101] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008116] arch_timer: CPU2: Trapping CNTVCT access
[    0.008125] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.008786] Detected VIPT I-cache on CPU3
[    0.008801] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008808] arch_timer: CPU3: Trapping CNTVCT access
[    0.008814] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.009419] Detected VIPT I-cache on CPU4
[    0.009434] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.009441] arch_timer: CPU4: Trapping CNTVCT access
[    0.009446] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.010061] Detected VIPT I-cache on CPU5
[    0.010076] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.010082] arch_timer: CPU5: Trapping CNTVCT access
[    0.010088] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.010159] smp: Brought up 1 node, 6 CPUs
[    0.010164] SMP: Total of 6 processors activated.
[    0.010170] CPU features: detected: 32-bit EL0 Support
[    0.010175] CPU features: detected: CRC32 instructions
[    0.021282] CPU: All CPU(s) started at EL2
[    0.021329] alternatives: patching kernel code
[    0.023218] devtmpfs: initialized
[    0.030112] Registered cp15_barrier emulation handler
[    0.030122] Registered setend emulation handler
[    0.030352] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.030388] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.043689] xor: measuring software checksum speed
[    0.079929]    8regs     :  3323.000 MB/sec
[    0.119965]    32regs    :  3854.000 MB/sec
[    0.160005]    arm64_neon:  3576.000 MB/sec
[    0.160008] xor: using function: 32regs (3854.000 MB/sec)
[    0.160016] pinctrl core: initialized pinctrl subsystem
[    0.160719] thermal_sys: Registered thermal governor 'fair_share'
[    0.160722] thermal_sys: Registered thermal governor 'bang_bang'
[    0.160727] thermal_sys: Registered thermal governor 'step_wise'
[    0.160729] thermal_sys: Registered thermal governor 'user_space'
[    0.161136] DMI not present or invalid.
[    0.161502] NET: Registered protocol family 16
[    0.162847] DMA: preallocated 256 KiB pool for atomic allocations
[    0.162858] audit: initializing netlink subsys (disabled)
[    0.162962] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[    0.164409] cpuidle: using governor menu
[    0.164753] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.164859] ASID allocator initialised with 65536 entries
[    0.165762] Serial: AMBA PL011 UART driver
[    0.178448] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.178456] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.178459] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.178462] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.180621] cryptd: max_cpu_qlen set to 1000
[    0.252198] raid6: neonx8   gen()  2805 MB/s
[    0.320251] raid6: neonx8   xor()  2042 MB/s
[    0.388317] raid6: neonx4   gen()  2999 MB/s
[    0.456379] raid6: neonx4   xor()  2351 MB/s
[    0.524444] raid6: neonx2   gen()  2586 MB/s
[    0.592509] raid6: neonx2   xor()  2219 MB/s
[    0.660578] raid6: neonx1   gen()  2028 MB/s
[    0.728636] raid6: neonx1   xor()  1726 MB/s
[    0.796714] raid6: int64x8  gen()  1375 MB/s
[    0.864793] raid6: int64x8  xor()   736 MB/s
[    0.932837] raid6: int64x4  gen()  1463 MB/s
[    1.000914] raid6: int64x4  xor()   733 MB/s
[    1.068971] raid6: int64x2  gen()  1361 MB/s
[    1.137042] raid6: int64x2  xor()   619 MB/s
[    1.205095] raid6: int64x1  gen()  1126 MB/s
[    1.273171] raid6: int64x1  xor()   462 MB/s
[    1.273174] raid6: using algorithm neonx4 gen() 2999 MB/s
[    1.273176] raid6: .... xor() 2351 MB/s, rmw enabled
[    1.273179] raid6: using neon recovery algorithm
[    1.273740] ACPI: Interpreter disabled.
[    1.274000] iommu: Default domain type: Translated
[    1.274102] vgaarb: loaded
[    1.274855] SCSI subsystem initialized
[    1.275070] usbcore: registered new interface driver usbfs
[    1.275105] usbcore: registered new interface driver hub
[    1.275163] usbcore: registered new device driver usb
[    1.275356] pps_core: LinuxPPS API ver. 1 registered
[    1.275358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.275369] PTP clock support registered
[    1.275488] EDAC MC: Ver: 3.0.0
[    1.276427] NetLabel: Initializing
[    1.276431] NetLabel:  domain hash size = 128
[    1.276433] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.276472] NetLabel:  unlabeled traffic allowed by default
[    1.276893] clocksource: Switched to clocksource arch_sys_counter
[    1.277118] VFS: Disk quotas dquot_6.6.0
[    1.277164] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.277503] AppArmor: AppArmor Filesystem Enabled
[    1.277556] pnp: PnP ACPI: disabled
[    1.282292] NET: Registered protocol family 2
[    1.282671] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.282744] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.282999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.283185] TCP: Hash tables configured (established 32768 bind 32768)
[    1.283423] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.283469] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.283610] NET: Registered protocol family 1
[    1.283627] PCI: CLS 0 bytes, default 64
[    1.283757] Trying to unpack rootfs image as initramfs...
[    1.821709] Freeing initrd memory: 13572K
[    1.822539] kvm [1]: IPA Size Limit: 40bits
[    1.823032] kvm [1]: vgic interrupt IRQ1
[    1.823161] kvm [1]: Hyp mode initialized successfully
[    1.827263] Initialise system trusted keyrings
[    1.827289] Key type blacklist registered
[    1.827376] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.831185] zbud: loaded
[    1.832159] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.832703] fuse: init (API version 7.31)
[    1.833593] integrity: Platform Keyring initialized
[    1.843340] Key type asymmetric registered
[    1.843344] Asymmetric key parser 'x509' registered
[    1.843376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.843525] io scheduler mq-deadline registered
[    1.843527] io scheduler kyber registered
[    1.843614] io scheduler bfq registered
[    1.845789] GPIO line 447 (usb-hub-reset) hogged as output/high
[    1.848273] EINJ: ACPI disabled.
[    1.853955] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
[    1.855098] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.856777] Serial: AMBA driver
[    1.857133] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.857165] printk: console [ttyAML0] enabled
[    1.861740] loop: module loaded
[    1.863670] libphy: Fixed MDIO Bus: probed
[    1.863932] tun: Universal TUN/TAP device driver, 1.6
[    1.864487] thunder_xcv, ver 1.0
[    1.864513] thunder_bgx, ver 1.0
[    1.864540] nicpf, ver 1.0
[    1.864928] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.864931] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.864963] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.864966] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.864990] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.864992] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.865093] sky2: driver version 1.30
[    1.865422] VFIO - User Level meta-driver version: 0.3
[    1.866705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.866717] ehci-pci: EHCI PCI platform driver
[    1.866747] ehci-platform: EHCI generic platform driver
[    1.866850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.866857] ohci-pci: OHCI PCI platform driver
[    1.866885] ohci-platform: OHCI generic platform driver
[    1.867225] usbcore: registered new interface driver usb-storage
[    1.868377] mousedev: PS/2 mouse device common for all mice
[    1.868694] i2c /dev entries driver
[    1.870559] sdhci: Secure Digital Host Controller Interface driver
[    1.870564] sdhci: Copyright(c) Pierre Ossman
[    1.870695] Synopsys Designware Multimedia Card Interface Driver
[    1.871880] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.872663] ledtrig-cpu: registered to indicate activity on CPUs
[    1.873107] meson-sm: secure-monitor enabled
[    1.873320] hid: raw HID events driver (C) Jiri Kosina
[    1.873412] usbcore: registered new interface driver usbhid
[    1.873414] usbhid: USB HID core driver
[    1.874706] NET: Registered protocol family 10
[    1.875341] Segment Routing with IPv6
[    1.875386] NET: Registered protocol family 17
[    1.875448] 8021q: 802.1Q VLAN Support v1.8
[    1.875480] Key type dns_resolver registered
[    1.875918] registered taskstats version 1
[    1.875923] Loading compiled-in X.509 certificates
[    1.879007] Loaded X.509 cert 'Build time autogenerated kernel key: 43faf3d3e8e41402c77ad5248011bde7e3569370'
[    1.879104] zswap: loaded using pool lzo/zbud
[    1.879311] Key type ._fscrypt registered
[    1.879313] Key type .fscrypt registered
[    1.879316] Key type fscrypt-provisioning registered
[    1.881470] Btrfs loaded, crc32c=crc32c-generic
[    1.881549] Key type big_key registered
[    1.890976] Key type encrypted registered
[    1.890988] AppArmor: AppArmor sha1 policy hashing enabled
[    1.907089] clk: Not disabling unused clocks
[    1.907455] Freeing unused kernel memory: 1088K
[    1.944946] Run /init as init process
[    1.944952]   with arguments:
[    1.944954]     /init
[    1.944956]   with environment:
[    1.944959]     HOME=/
[    1.944961]     TERM=linux
[    1.944963]     hdmimode=custombuilt
[    1.944965]     cvbsmode=576cvbs
[    1.944967]     max_freq_a53=1896
[    1.944968]     max_freq_a73=1800
[    1.944970]     voutmode=hdmi
[    1.944973]     modeline=1920,1080,148500,56250,50,1920,2448,2492,2640,1080,1084,1089,1125,1,1,1
[    1.944974]     disablehpd=false
[    1.944976]     cvbscable=
[    1.944978]     overscan=100
[    2.113149] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    2.117802] 5V: supplied by 12V
[    2.118338] HUB_5V: supplied by 5V
[    2.118515] USB_PWR_EN: supplied by 5V
[    2.118844] VDDAO_3V3: supplied by 12V
[    2.129070] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    2.129076] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    2.129164] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    2.129170] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    2.131339] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    2.131347] meson8b-dwmac ff3f0000.ethernet:         DWMAC1000
[    2.131351] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    2.131355] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    2.131358] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    2.131361] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    2.131364] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    2.131388] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    2.131391] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    2.131394] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.131680] libphy: stmmac: probed
[    2.133197] pwm-regulator: supplied by regulator-dummy
[    2.133453] VCC_3V3: supplied by VDDAO_3V3
[    2.133490] FLASH_1V8: supplied by VCC_3V3
[    2.133528] VCC_1V8: supplied by VCC_3V3
[    2.133564] VDDAO_1V8: supplied by VDDAO_3V3
[    2.133858] pwm-regulator: supplied by regulator-dummy
[    2.145642] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    2.147484] meson-vrtc ff8000a8.rtc: registered as rtc0
[    2.147522] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[    2.170025] libphy: mdio_mux: probed
[    2.195778] mmc0: new high speed SDHC card at address b368
[    2.196520] mmcblk0: mmc0:b368 CBADS 30.0 GiB
[    2.198494]  mmcblk0: p1
[    2.225553] libphy: mdio_mux: probed
[    2.236916] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    2.236922] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    2.239621] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[    2.239662] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[    2.239796] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    2.240526] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.240541] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.240656] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    2.240681] xhci-hcd xhci-hcd.1.auto: irq 28, io mem 0xff500000
[    2.240865] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    2.240870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.240874] usb usb1: Product: xHCI Host Controller
[    2.240878] usb usb1: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.240900] usb usb1: SerialNumber: xhci-hcd.1.auto
[    2.241320] hub 1-0:1.0: USB hub found
[    2.241338] hub 1-0:1.0: 2 ports detected
[    2.241548] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.241556] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.241565] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.241597] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.241659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[    2.241664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.241667] usb usb2: Product: xHCI Host Controller
[    2.241671] usb usb2: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.241674] usb usb2: SerialNumber: xhci-hcd.1.auto
[    2.241933] hub 2-0:1.0: USB hub found
[    2.241949] hub 2-0:1.0: 1 port detected
[    2.245146] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.245186] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.349025] random: fast init done
[    2.426244] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    2.580908] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.735294] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[    2.735300] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.735302] usb 1-1: Product: USB2.1 Hub
[    2.735305] usb 1-1: Manufacturer: GenesysLogic
[    2.785858] hub 1-1:1.0: USB hub found
[    2.786091] hub 1-1:1.0: 4 ports detected
[    2.861029] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.883505] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[    2.883510] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.883512] usb 2-1: Product: USB3.1 Hub
[    2.883516] usb 2-1: Manufacturer: GenesysLogic
[    2.913823] hub 2-1:1.0: USB hub found
[    2.914109] hub 2-1:1.0: 4 ports detected
[    3.160906] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd
[    3.189258] systemd[1]: System time before build time, advancing clock.
[    3.205515] systemd[1]: Inserted module 'autofs4'
[    3.263873] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.264116] systemd[1]: Detected architecture arm64.
[    3.287525] systemd[1]: Set hostname to <odroidn2>.
[    3.294010] usb 1-1.1: New USB device found, idVendor=045e, idProduct=008a, bcdDevice=73.73
[    3.294014] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.294017] usb 1-1.1: Product: Microsoft Wireless Optical Desktop® 1.00
[    3.294019] usb 1-1.1: Manufacturer: Microsoft
[    3.365622] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:008A.0001/input/input0
[    3.425160] hid-generic 0003:045E:008A.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input0
[    3.447729] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input1
[    3.447883] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input2
[    3.505077] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input3
[    3.505166] hid-generic 0003:045E:008A.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input1
[    3.582261] random: systemd: uninitialized urandom read (16 bytes read)
[    3.585709] random: systemd: uninitialized urandom read (16 bytes read)
[    3.585868] systemd[1]: Listening on Journal Audit Socket.
[    3.586245] random: systemd: uninitialized urandom read (16 bytes read)
[    3.586437] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.586556] systemd[1]: Reached target Remote File Systems.
[    3.586639] systemd[1]: Reached target Swap.
[    3.586827] systemd[1]: Listening on udev Kernel Socket.
[    3.587035] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.587980] systemd[1]: Created slice User and Session Slice.
[    3.691296] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    4.188438] zram: Added device: zram0
[    4.188622] zram: Added device: zram1
[    4.188811] zram: Added device: zram2
[    4.249056] zram1: detected capacity change from 0 to 1073741824
[    4.500994] mc: Linux media interface: v0.10
[    4.533375] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    4.586685] videodev: Linux video capture interface: v2.00
[    4.627450] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    4.640808] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.640875] meson-drm ff900000.vpu: CVBS Output connector not available
[    4.640967] Registered IR keymap rc-odroid
[    4.649148] IR NEC protocol handler initialized
[    4.663428] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    4.672951] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    4.673290] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    4.673503] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[    4.673696] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    4.676941] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    4.676991] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    4.677049] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input4
[    4.677185] meson-ir ff808000.ir: receiver initialized
[    4.953200] Console: switching to colour frame buffer device 240x67
[    4.980506] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
[    5.304898] Adding 1048572k swap on /dev/zram1.  Priority:5 extents:1 across:1048572k SSFS
[    5.381163] zram0: detected capacity change from 0 to 52428800
[    7.459427] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[    7.459445] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[    8.397251] systemd[1]: Started Armbian memory supported logging.
[    8.401380] systemd[1]: Starting Journal Service...
[    8.459846] systemd[1]: Started Journal Service.
[    8.482296] systemd-journald[1684]: Received request to flush runtime journal from PID 1
[    8.935287] random: crng init done
[    8.935307] random: 7 urandom warning(s) missed due to ratelimiting
[   11.661858] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   11.664260] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[   11.664271] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[   11.664279] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[   15.346603] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.346639] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.359620] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
[   15.409178] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   15.513379] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
[   15.513390] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[   15.513397] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
I could see from your logs that you have other ethernet devices connected to your N2 (RTL8811AU). I have a RT8152B here in a USB hub (https://shop.pimoroni.com/products/thre ... -connector) which worked and gave me an ethernet connection so I could SSH in:

Code: Select all

[  216.685756] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
[  232.356766] dwc3-meson-g12a ffe09000.usb: switching to Host Mode
[  232.630212] usb 1-2: new high-speed USB device number 4 using xhci-hcd
[  232.778518] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[  232.778531] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  232.778539] usb 1-2: Product: USB 2.0 Hub
[  232.834001] hub 1-2:1.0: USB hub found
[  232.834084] hub 1-2:1.0: 4 ports detected
[  233.222173] usb 1-2.4: new high-speed USB device number 5 using xhci-hcd
[  233.422801] usb 1-2.4: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[  233.422809] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  233.422815] usb 1-2.4: Product: USB 10/100 LAN
[  233.422820] usb 1-2.4: Manufacturer: Realtek
[  233.422825] usb 1-2.4: SerialNumber: 00E04C360F18
[  233.793832] usb 1-2.4: reset high-speed USB device number 5 using xhci-hcd
[  234.047030] r8152 1-2.4:1.0: skip request firmware
[  234.075185] r8152 1-2.4:1.0 eth1: v1.11.11
[  234.075282] usbcore: registered new interface driver r8152
[  234.096747] usbcore: registered new interface driver cdc_ether
[  278.338563] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  278.339285] r8152 1-2.4:1.0 eth1: carrier on
At this point I thought I would plug in my HDD to see if it would connect properly, so I turned off the N2 to do this
When rebooted the onboard ethernet port is working!:

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.7.6-meson64 (root@stable) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk.20 SMP PREEMPT Sat Jun 27 18:03:14 UTC 2020
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b5800000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xb5036100-0xb5037fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ed7fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000ed7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] On node 0 totalpages: 972032
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261376 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11104 pages used for memmap
[    0.000000]   DMA32 zone: 710656 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54168 r8192 d31848 u94208
[    0.000000] pcpu-alloc: s54168 r8192 d31848 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956832
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=8964d5d7-4a03-47dd-9d2e-6c6a58d278f4 rootwait  rootflags=data=writeback rw clk_ignore_unused rootfstype=ext4 console=ttyAML0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=custombuilt cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi modeline=1920,1080,148500,56250,50,1920,2448,2492,2640,1080,1084,1089,1125,1,1,1 disablehpd=false cvbscable= overscan=100
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x38abe000-0x3cabe000] (64MB)
[    0.000000] Memory: 2788748K/3888128K available (13628K kernel code, 1254K rwdata, 5456K rodata, 1088K init, 584K bss, 181876K reserved, 917504K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] random: get_random_bytes called from start_kernel+0x35c/0x528 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000270] Console: colour dummy device 80x25
[    0.000282] printk: console [tty1] enabled
[    0.000366] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000374] pid_max: default: 32768 minimum: 301
[    0.000464] LSM: Security Framework initializing
[    0.000487] Yama: becoming mindful.
[    0.000568] AppArmor: AppArmor initialized
[    0.000618] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000635] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002448] rcu: Hierarchical SRCU implementation.
[    0.005835] EFI services will not be available.
[    0.006247] smp: Bringing up secondary CPUs ...
[    0.006879] Detected VIPT I-cache on CPU1
[    0.006929] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.008098] CPU features: detected: ARM erratum 858921
[    0.008106] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.008113] Detected VIPT I-cache on CPU2
[    0.008137] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008151] arch_timer: CPU2: Trapping CNTVCT access
[    0.008160] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.008814] Detected VIPT I-cache on CPU3
[    0.008829] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008836] arch_timer: CPU3: Trapping CNTVCT access
[    0.008842] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.009449] Detected VIPT I-cache on CPU4
[    0.009464] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.009470] arch_timer: CPU4: Trapping CNTVCT access
[    0.009476] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.010105] Detected VIPT I-cache on CPU5
[    0.010120] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.010127] arch_timer: CPU5: Trapping CNTVCT access
[    0.010132] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.010201] smp: Brought up 1 node, 6 CPUs
[    0.010207] SMP: Total of 6 processors activated.
[    0.010213] CPU features: detected: 32-bit EL0 Support
[    0.010218] CPU features: detected: CRC32 instructions
[    0.021339] CPU: All CPU(s) started at EL2
[    0.021385] alternatives: patching kernel code
[    0.023268] devtmpfs: initialized
[    0.030165] Registered cp15_barrier emulation handler
[    0.030176] Registered setend emulation handler
[    0.030408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.030445] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.043728] xor: measuring software checksum speed
[    0.079932]    8regs     :  3323.000 MB/sec
[    0.119968]    32regs    :  3853.000 MB/sec
[    0.160008]    arm64_neon:  3576.000 MB/sec
[    0.160010] xor: using function: 32regs (3853.000 MB/sec)
[    0.160019] pinctrl core: initialized pinctrl subsystem
[    0.160713] thermal_sys: Registered thermal governor 'fair_share'
[    0.160716] thermal_sys: Registered thermal governor 'bang_bang'
[    0.160720] thermal_sys: Registered thermal governor 'step_wise'
[    0.160722] thermal_sys: Registered thermal governor 'user_space'
[    0.161125] DMI not present or invalid.
[    0.161497] NET: Registered protocol family 16
[    0.162901] DMA: preallocated 256 KiB pool for atomic allocations
[    0.162911] audit: initializing netlink subsys (disabled)
[    0.163025] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[    0.164432] cpuidle: using governor menu
[    0.164784] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.164888] ASID allocator initialised with 65536 entries
[    0.165812] Serial: AMBA PL011 UART driver
[    0.178972] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.178978] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.178982] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.178984] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.180276] cryptd: max_cpu_qlen set to 1000
[    0.248187] raid6: neonx8   gen()  2805 MB/s
[    0.316248] raid6: neonx8   xor()  2043 MB/s
[    0.384348] raid6: neonx4   gen()  3000 MB/s
[    0.452430] raid6: neonx4   xor()  1586 MB/s
[    0.520474] raid6: neonx2   gen()  2534 MB/s
[    0.588539] raid6: neonx2   xor()  2184 MB/s
[    0.656604] raid6: neonx1   gen()  2093 MB/s
[    0.724674] raid6: neonx1   xor()  1729 MB/s
[    0.792765] raid6: int64x8  gen()  1377 MB/s
[    0.860829] raid6: int64x8  xor()   736 MB/s
[    0.928884] raid6: int64x4  gen()  1463 MB/s
[    0.996937] raid6: int64x4  xor()   733 MB/s
[    1.065016] raid6: int64x2  gen()  1360 MB/s
[    1.133083] raid6: int64x2  xor()   619 MB/s
[    1.201150] raid6: int64x1  gen()  1126 MB/s
[    1.269201] raid6: int64x1  xor()   462 MB/s
[    1.269203] raid6: using algorithm neonx4 gen() 3000 MB/s
[    1.269206] raid6: .... xor() 1586 MB/s, rmw enabled
[    1.269208] raid6: using neon recovery algorithm
[    1.269782] ACPI: Interpreter disabled.
[    1.270070] iommu: Default domain type: Translated
[    1.270168] vgaarb: loaded
[    1.270770] SCSI subsystem initialized
[    1.271073] usbcore: registered new interface driver usbfs
[    1.271105] usbcore: registered new interface driver hub
[    1.271159] usbcore: registered new device driver usb
[    1.271352] pps_core: LinuxPPS API ver. 1 registered
[    1.271355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.271374] PTP clock support registered
[    1.271503] EDAC MC: Ver: 3.0.0
[    1.272422] NetLabel: Initializing
[    1.272426] NetLabel:  domain hash size = 128
[    1.272428] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.272464] NetLabel:  unlabeled traffic allowed by default
[    1.272905] clocksource: Switched to clocksource arch_sys_counter
[    1.273124] VFS: Disk quotas dquot_6.6.0
[    1.273167] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.273509] AppArmor: AppArmor Filesystem Enabled
[    1.273571] pnp: PnP ACPI: disabled
[    1.278672] NET: Registered protocol family 2
[    1.279065] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.279138] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.279394] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.279579] TCP: Hash tables configured (established 32768 bind 32768)
[    1.279835] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.279881] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.280025] NET: Registered protocol family 1
[    1.280044] PCI: CLS 0 bytes, default 64
[    1.280164] Trying to unpack rootfs image as initramfs...
[    1.818440] Freeing initrd memory: 13572K
[    1.819267] kvm [1]: IPA Size Limit: 40bits
[    1.819751] kvm [1]: vgic interrupt IRQ1
[    1.819873] kvm [1]: Hyp mode initialized successfully
[    1.824702] Initialise system trusted keyrings
[    1.824730] Key type blacklist registered
[    1.824817] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.828632] zbud: loaded
[    1.829668] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.830182] fuse: init (API version 7.31)
[    1.831028] integrity: Platform Keyring initialized
[    1.840521] Key type asymmetric registered
[    1.840524] Asymmetric key parser 'x509' registered
[    1.840551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.840691] io scheduler mq-deadline registered
[    1.840694] io scheduler kyber registered
[    1.840774] io scheduler bfq registered
[    1.842919] GPIO line 447 (usb-hub-reset) hogged as output/high
[    1.845444] EINJ: ACPI disabled.
[    1.850985] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
[    1.852116] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.853866] Serial: AMBA driver
[    1.854195] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.854232] printk: console [ttyAML0] enabled
[    1.858840] loop: module loaded
[    1.860825] libphy: Fixed MDIO Bus: probed
[    1.861070] tun: Universal TUN/TAP device driver, 1.6
[    1.861706] thunder_xcv, ver 1.0
[    1.861734] thunder_bgx, ver 1.0
[    1.861758] nicpf, ver 1.0
[    1.862113] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.862114] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.862141] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.862143] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.862170] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.862173] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.862269] sky2: driver version 1.30
[    1.862565] VFIO - User Level meta-driver version: 0.3
[    1.863846] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.863860] ehci-pci: EHCI PCI platform driver
[    1.863891] ehci-platform: EHCI generic platform driver
[    1.863994] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.864002] ohci-pci: OHCI PCI platform driver
[    1.864029] ohci-platform: OHCI generic platform driver
[    1.864377] usbcore: registered new interface driver usb-storage
[    1.865542] mousedev: PS/2 mouse device common for all mice
[    1.865847] i2c /dev entries driver
[    1.867719] sdhci: Secure Digital Host Controller Interface driver
[    1.867723] sdhci: Copyright(c) Pierre Ossman
[    1.867854] Synopsys Designware Multimedia Card Interface Driver
[    1.869060] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.869891] ledtrig-cpu: registered to indicate activity on CPUs
[    1.870221] meson-sm: secure-monitor enabled
[    1.870414] hid: raw HID events driver (C) Jiri Kosina
[    1.870494] usbcore: registered new interface driver usbhid
[    1.870496] usbhid: USB HID core driver
[    1.871760] NET: Registered protocol family 10
[    1.872446] Segment Routing with IPv6
[    1.872492] NET: Registered protocol family 17
[    1.872570] 8021q: 802.1Q VLAN Support v1.8
[    1.872602] Key type dns_resolver registered
[    1.873098] registered taskstats version 1
[    1.873102] Loading compiled-in X.509 certificates
[    1.876206] Loaded X.509 cert 'Build time autogenerated kernel key: 43faf3d3e8e41402c77ad5248011bde7e3569370'
[    1.876309] zswap: loaded using pool lzo/zbud
[    1.876555] Key type ._fscrypt registered
[    1.876558] Key type .fscrypt registered
[    1.876560] Key type fscrypt-provisioning registered
[    1.878273] Btrfs loaded, crc32c=crc32c-generic
[    1.878336] Key type big_key registered
[    1.888264] Key type encrypted registered
[    1.888278] AppArmor: AppArmor sha1 policy hashing enabled
[    1.904456] clk: Not disabling unused clocks
[    1.904924] Freeing unused kernel memory: 1088K
[    1.944961] Run /init as init process
[    1.944966]   with arguments:
[    1.944968]     /init
[    1.944970]   with environment:
[    1.944973]     HOME=/
[    1.944975]     TERM=linux
[    1.944978]     hdmimode=custombuilt
[    1.944980]     cvbsmode=576cvbs
[    1.944981]     max_freq_a53=1896
[    1.944983]     max_freq_a73=1800
[    1.944986]     voutmode=hdmi
[    1.944988]     modeline=1920,1080,148500,56250,50,1920,2448,2492,2640,1080,1084,1089,1125,1,1,1
[    1.944990]     disablehpd=false
[    1.944992]     cvbscable=
[    1.944993]     overscan=100
[    2.111643] 5V: supplied by 12V
[    2.112335] HUB_5V: supplied by 5V
[    2.112620] USB_PWR_EN: supplied by 5V
[    2.113181] VDDAO_3V3: supplied by 12V
[    2.114374] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    2.125569] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    2.125575] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    2.125664] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    2.125670] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    2.129341] pwm-regulator: supplied by regulator-dummy
[    2.129598] VCC_3V3: supplied by VDDAO_3V3
[    2.129636] FLASH_1V8: supplied by VCC_3V3
[    2.129676] VCC_1V8: supplied by VCC_3V3
[    2.129740] VDDAO_1V8: supplied by VDDAO_3V3
[    2.129941] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    2.129950] meson8b-dwmac ff3f0000.ethernet:         DWMAC1000
[    2.129955] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    2.129959] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    2.129963] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    2.129966] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    2.129969] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    2.129993] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    2.129997] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    2.130000] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.130021] pwm-regulator: supplied by regulator-dummy
[    2.130367] libphy: stmmac: probed
[    2.143506] meson-vrtc ff8000a8.rtc: registered as rtc0
[    2.143532] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[    2.146070] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    2.174556] libphy: mdio_mux: probed
[    2.199271] mmc0: new high speed SDHC card at address b368
[    2.200343] mmcblk0: mmc0:b368 CBADS 30.0 GiB
[    2.202636]  mmcblk0: p1
[    2.228827] libphy: mdio_mux: probed
[    2.238128] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    2.238135] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    2.241310] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[    2.241414] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[    2.241617] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    2.243019] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.243041] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.243176] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    2.243218] xhci-hcd xhci-hcd.1.auto: irq 28, io mem 0xff500000
[    2.243525] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    2.243531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.243536] usb usb1: Product: xHCI Host Controller
[    2.243540] usb usb1: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.243544] usb usb1: SerialNumber: xhci-hcd.1.auto
[    2.244018] hub 1-0:1.0: USB hub found
[    2.244044] hub 1-0:1.0: 2 ports detected
[    2.244346] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.244363] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.244376] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.244442] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.244530] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[    2.244536] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.244540] usb usb2: Product: xHCI Host Controller
[    2.244545] usb usb2: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.244549] usb usb2: SerialNumber: xhci-hcd.1.auto
[    2.245021] hub 2-0:1.0: USB hub found
[    2.245047] hub 2-0:1.0: 1 port detected
[    2.249922] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.249970] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.370259] random: fast init done
[    2.475132] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    2.580974] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.731270] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[    2.731275] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.731278] usb 1-1: Product: USB2.1 Hub
[    2.731280] usb 1-1: Manufacturer: GenesysLogic
[    2.788630] hub 1-1:1.0: USB hub found
[    2.788853] hub 1-1:1.0: 4 ports detected
[    2.857022] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.879507] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[    2.879511] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.879513] usb 2-1: Product: USB3.1 Hub
[    2.879515] usb 2-1: Manufacturer: GenesysLogic
[    2.900607] hub 2-1:1.0: USB hub found
[    2.900905] hub 2-1:1.0: 4 ports detected
[    3.004919] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[    3.153121] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    3.153127] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.153129] usb 1-2: Product: USB 2.0 Hub
[    3.204536] hub 1-2:1.0: USB hub found
[    3.204572] hub 1-2:1.0: 4 ports detected
[    3.242623] systemd[1]: System time before build time, advancing clock.
[    3.256921] usb 1-1.1: new low-speed USB device number 4 using xhci-hcd
[    3.259192] systemd[1]: Inserted module 'autofs4'
[    3.317593] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.317825] systemd[1]: Detected architecture arm64.
[    3.339179] systemd[1]: Set hostname to <odroidn2>.
[    3.394354] usb 1-1.1: New USB device found, idVendor=045e, idProduct=008a, bcdDevice=73.73
[    3.394361] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.394365] usb 1-1.1: Product: Microsoft Wireless Optical Desktop® 1.00
[    3.394368] usb 1-1.1: Manufacturer: Microsoft
[    3.464592] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:008A.0001/input/input0
[    3.521302] hid-generic 0003:045E:008A.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input0
[    3.543569] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input1
[    3.543760] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input2
[    3.601131] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input3
[    3.601249] hid-generic 0003:045E:008A.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input1
[    3.604926] usb 1-2.4: new high-speed USB device number 5 using xhci-hcd
[    3.641354] random: systemd: uninitialized urandom read (16 bytes read)
[    3.644686] random: systemd: uninitialized urandom read (16 bytes read)
[    3.644931] systemd[1]: Listening on udev Control Socket.
[    3.645312] random: systemd: uninitialized urandom read (16 bytes read)
[    3.645424] systemd[1]: Listening on Journal Audit Socket.
[    3.645635] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.646972] systemd[1]: Created slice system-getty.slice.
[    3.647122] systemd[1]: Reached target System Time Synchronized.
[    3.647442] systemd[1]: Listening on Journal Socket.
[    3.649031] systemd[1]: Starting Set the console keyboard layout...
[    3.771824] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    3.805627] usb 1-2.4: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    3.805634] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.805637] usb 1-2.4: Product: USB 10/100 LAN
[    3.805640] usb 1-2.4: Manufacturer: Realtek
[    3.805643] usb 1-2.4: SerialNumber: 00E04C360F18
[    4.020969] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.047426] usb 2-1.3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    4.047433] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    4.047436] usb 2-1.3: Product: Ugreen Storage Device
[    4.047439] usb 2-1.3: Manufacturer: Ugreen
[    4.047442] usb 2-1.3: SerialNumber: 022003254669
[    4.315057] zram: Added device: zram0
[    4.315259] zram: Added device: zram1
[    4.315458] zram: Added device: zram2
[    4.448169] zram1: detected capacity change from 0 to 1073741824
[    4.708476] usb 1-2.4: reset high-speed USB device number 5 using xhci-hcd
[    4.957603] r8152 1-2.4:1.0: skip request firmware
[    4.985524] r8152 1-2.4:1.0 eth1: v1.11.11
[    4.985974] usbcore: registered new interface driver r8152
[    4.999357] usbcore: registered new interface driver cdc_ether
[    5.102797] mc: Linux media interface: v0.10
[    5.172167] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    5.174746] videodev: Linux video capture interface: v2.00
[    5.180284] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    5.200907] Registered IR keymap rc-odroid
[    5.209646] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.209704] meson-drm ff900000.vpu: CVBS Output connector not available
[    5.214454] IR NEC protocol handler initialized
[    5.236971] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    5.237279] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    5.237489] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[    5.237714] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    5.240998] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    5.241096] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    5.241157] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input4
[    5.241428] meson-ir ff808000.ir: receiver initialized
[    5.243130] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.254768] scsi host0: uas
[    5.256063] usbcore: registered new interface driver uas
[    5.256610] scsi 0:0:0:0: Direct-Access     FUJITSU  MHZ2160BH G2     0    PQ: 0 ANSI: 6
[    5.267930] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.444514] usb 1-2.4: reset high-speed USB device number 5 using xhci-hcd
[    5.517112] Console: switching to colour frame buffer device 240x67
[    5.520910] Adding 1048572k swap on /dev/zram1.  Priority:5 extents:1 across:1048572k SSFS
[    5.544475] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
[    5.601591] zram0: detected capacity change from 0 to 52428800
[    5.693598] r8152 1-2.4:1.0: skip request firmware
[    5.724976] r8152 1-2.4:1.0 eth1: v1.11.11
[    7.698016] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[    7.698034] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[    8.658820] systemd[1]: Started Armbian memory supported logging.
[    8.662981] systemd[1]: Starting Journal Service...
[    8.730247] systemd[1]: Started Journal Service.
[    8.750590] systemd-journald[1704]: Received request to flush runtime journal from PID 1
[    9.014099] random: crng init done
[    9.014115] random: 7 urandom warning(s) missed due to ratelimiting
[   11.885443] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   11.896885] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[   11.896894] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[   11.896902] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[   11.957144] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   11.957697] r8152 1-2.4:1.0 eth1: carrier on
[   35.819748] sd 0:0:0:0: tag#25 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[   35.819755] sd 0:0:0:0: tag#25 CDB: opcode=0x9e, sa=0x10 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00
[   35.835750] scsi host0: uas_eh_device_reset_handler start
[   35.916197] usb 2-1.3: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   35.938347] scsi host0: uas_eh_device_reset_handler success
[   35.944369] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   35.944480] sd 0:0:0:0: [sda] Write Protect is off
[   35.944484] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[   35.944716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   35.944974] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[   36.422693]  sda: sda1
[   36.424810] sd 0:0:0:0: [sda] Attached SCSI disk
[   36.746234] BTRFS: device fsid 3ff93dac-88d4-4f43-a4db-5ec6593bbba8 devid 1 transid 874 /dev/sda1 scanned by systemd-udevd (2391)
So there is a bug in there somewhere and it is repeatable. I turned off the N2 and removed the RT8152B (and hub), when restarted the onboard ethernet was not working again:

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.7.6-meson64 (root@stable) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk.20 SMP PREEMPT Sat Jun 27 18:03:14 UTC 2020
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b5800000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xb5036100-0xb5037fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ed7fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000ed7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] On node 0 totalpages: 972032
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261376 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11104 pages used for memmap
[    0.000000]   DMA32 zone: 710656 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54168 r8192 d31848 u94208
[    0.000000] pcpu-alloc: s54168 r8192 d31848 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956832
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=8964d5d7-4a03-47dd-9d2e-6c6a58d278f4 rootwait  rootflags=data=writeback rw clk_ignore_unused rootfstype=ext4 console=ttyAML0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=1080p60hz cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi  disablehpd=false cvbscable= overscan=100
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x38abe000-0x3cabe000] (64MB)
[    0.000000] Memory: 2788748K/3888128K available (13628K kernel code, 1254K rwdata, 5456K rodata, 1088K init, 584K bss, 181876K reserved, 917504K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] random: get_random_bytes called from start_kernel+0x35c/0x528 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000270] Console: colour dummy device 80x25
[    0.000281] printk: console [tty1] enabled
[    0.000367] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000374] pid_max: default: 32768 minimum: 301
[    0.000464] LSM: Security Framework initializing
[    0.000486] Yama: becoming mindful.
[    0.000566] AppArmor: AppArmor initialized
[    0.000616] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000633] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002431] rcu: Hierarchical SRCU implementation.
[    0.005788] EFI services will not be available.
[    0.006200] smp: Bringing up secondary CPUs ...
[    0.006833] Detected VIPT I-cache on CPU1
[    0.006882] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.008047] CPU features: detected: ARM erratum 858921
[    0.008055] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.008063] Detected VIPT I-cache on CPU2
[    0.008086] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008101] arch_timer: CPU2: Trapping CNTVCT access
[    0.008110] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.008763] Detected VIPT I-cache on CPU3
[    0.008779] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008785] arch_timer: CPU3: Trapping CNTVCT access
[    0.008791] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.009397] Detected VIPT I-cache on CPU4
[    0.009412] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.009418] arch_timer: CPU4: Trapping CNTVCT access
[    0.009424] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.010045] Detected VIPT I-cache on CPU5
[    0.010061] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.010067] arch_timer: CPU5: Trapping CNTVCT access
[    0.010073] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.010143] smp: Brought up 1 node, 6 CPUs
[    0.010150] SMP: Total of 6 processors activated.
[    0.010156] CPU features: detected: 32-bit EL0 Support
[    0.010161] CPU features: detected: CRC32 instructions
[    0.021304] CPU: All CPU(s) started at EL2
[    0.021350] alternatives: patching kernel code
[    0.023245] devtmpfs: initialized
[    0.030110] Registered cp15_barrier emulation handler
[    0.030120] Registered setend emulation handler
[    0.030358] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.030394] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.043661] xor: measuring software checksum speed
[    0.079933]    8regs     :  3323.000 MB/sec
[    0.119969]    32regs    :  3853.000 MB/sec
[    0.160009]    arm64_neon:  3576.000 MB/sec
[    0.160011] xor: using function: 32regs (3853.000 MB/sec)
[    0.160019] pinctrl core: initialized pinctrl subsystem
[    0.160690] thermal_sys: Registered thermal governor 'fair_share'
[    0.160693] thermal_sys: Registered thermal governor 'bang_bang'
[    0.160697] thermal_sys: Registered thermal governor 'step_wise'
[    0.160699] thermal_sys: Registered thermal governor 'user_space'
[    0.161092] DMI not present or invalid.
[    0.161466] NET: Registered protocol family 16
[    0.162770] DMA: preallocated 256 KiB pool for atomic allocations
[    0.162781] audit: initializing netlink subsys (disabled)
[    0.162907] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[    0.164282] cpuidle: using governor menu
[    0.164606] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.164713] ASID allocator initialised with 65536 entries
[    0.165621] Serial: AMBA PL011 UART driver
[    0.179351] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.179358] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.179362] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.179365] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.180630] cryptd: max_cpu_qlen set to 1000
[    0.248213] raid6: neonx8   gen()  2798 MB/s
[    0.316268] raid6: neonx8   xor()  2042 MB/s
[    0.384337] raid6: neonx4   gen()  3000 MB/s
[    0.452402] raid6: neonx4   xor()  2348 MB/s
[    0.520473] raid6: neonx2   gen()  2578 MB/s
[    0.588547] raid6: neonx2   xor()  2223 MB/s
[    0.656621] raid6: neonx1   gen()  2021 MB/s
[    0.724692] raid6: neonx1   xor()  1725 MB/s
[    0.792761] raid6: int64x8  gen()  1375 MB/s
[    0.860853] raid6: int64x8  xor()   736 MB/s
[    0.928900] raid6: int64x4  gen()  1463 MB/s
[    0.996968] raid6: int64x4  xor()   733 MB/s
[    1.065025] raid6: int64x2  gen()  1360 MB/s
[    1.133083] raid6: int64x2  xor()   619 MB/s
[    1.201147] raid6: int64x1  gen()  1126 MB/s
[    1.269227] raid6: int64x1  xor()   462 MB/s
[    1.269230] raid6: using algorithm neonx4 gen() 3000 MB/s
[    1.269232] raid6: .... xor() 2348 MB/s, rmw enabled
[    1.269235] raid6: using neon recovery algorithm
[    1.269799] ACPI: Interpreter disabled.
[    1.270040] iommu: Default domain type: Translated
[    1.270141] vgaarb: loaded
[    1.270812] SCSI subsystem initialized
[    1.271081] usbcore: registered new interface driver usbfs
[    1.271111] usbcore: registered new interface driver hub
[    1.271166] usbcore: registered new device driver usb
[    1.271361] pps_core: LinuxPPS API ver. 1 registered
[    1.271363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.271421] PTP clock support registered
[    1.271552] EDAC MC: Ver: 3.0.0
[    1.272451] NetLabel: Initializing
[    1.272455] NetLabel:  domain hash size = 128
[    1.272457] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.272494] NetLabel:  unlabeled traffic allowed by default
[    1.272900] clocksource: Switched to clocksource arch_sys_counter
[    1.273134] VFS: Disk quotas dquot_6.6.0
[    1.273179] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.273524] AppArmor: AppArmor Filesystem Enabled
[    1.273565] pnp: PnP ACPI: disabled
[    1.278362] NET: Registered protocol family 2
[    1.278763] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.278837] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.279095] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.279281] TCP: Hash tables configured (established 32768 bind 32768)
[    1.279534] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.279579] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.279720] NET: Registered protocol family 1
[    1.279737] PCI: CLS 0 bytes, default 64
[    1.279862] Trying to unpack rootfs image as initramfs...
[    1.818673] Freeing initrd memory: 13572K
[    1.819499] kvm [1]: IPA Size Limit: 40bits
[    1.819990] kvm [1]: vgic interrupt IRQ1
[    1.820107] kvm [1]: Hyp mode initialized successfully
[    1.824600] Initialise system trusted keyrings
[    1.824627] Key type blacklist registered
[    1.824721] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.828566] zbud: loaded
[    1.829594] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.830093] fuse: init (API version 7.31)
[    1.830965] integrity: Platform Keyring initialized
[    1.840642] Key type asymmetric registered
[    1.840646] Asymmetric key parser 'x509' registered
[    1.840674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.840811] io scheduler mq-deadline registered
[    1.840814] io scheduler kyber registered
[    1.840945] io scheduler bfq registered
[    1.843072] GPIO line 447 (usb-hub-reset) hogged as output/high
[    1.845516] EINJ: ACPI disabled.
[    1.851088] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
[    1.852199] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.854076] Serial: AMBA driver
[    1.854404] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.854428] printk: console [ttyAML0] enabled
[    1.859209] loop: module loaded
[    1.861220] libphy: Fixed MDIO Bus: probed
[    1.861546] tun: Universal TUN/TAP device driver, 1.6
[    1.862100] thunder_xcv, ver 1.0
[    1.862125] thunder_bgx, ver 1.0
[    1.862148] nicpf, ver 1.0
[    1.862507] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.862509] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.862534] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.862536] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.862569] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.862571] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.862668] sky2: driver version 1.30
[    1.862958] VFIO - User Level meta-driver version: 0.3
[    1.864234] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.864248] ehci-pci: EHCI PCI platform driver
[    1.864273] ehci-platform: EHCI generic platform driver
[    1.864374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.864381] ohci-pci: OHCI PCI platform driver
[    1.864407] ohci-platform: OHCI generic platform driver
[    1.864739] usbcore: registered new interface driver usb-storage
[    1.865903] mousedev: PS/2 mouse device common for all mice
[    1.866215] i2c /dev entries driver
[    1.868111] sdhci: Secure Digital Host Controller Interface driver
[    1.868115] sdhci: Copyright(c) Pierre Ossman
[    1.868249] Synopsys Designware Multimedia Card Interface Driver
[    1.869486] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.870303] ledtrig-cpu: registered to indicate activity on CPUs
[    1.870628] meson-sm: secure-monitor enabled
[    1.870833] hid: raw HID events driver (C) Jiri Kosina
[    1.870915] usbcore: registered new interface driver usbhid
[    1.870917] usbhid: USB HID core driver
[    1.872188] NET: Registered protocol family 10
[    1.872911] Segment Routing with IPv6
[    1.872959] NET: Registered protocol family 17
[    1.873052] 8021q: 802.1Q VLAN Support v1.8
[    1.873080] Key type dns_resolver registered
[    1.873554] registered taskstats version 1
[    1.873558] Loading compiled-in X.509 certificates
[    1.876692] Loaded X.509 cert 'Build time autogenerated kernel key: 43faf3d3e8e41402c77ad5248011bde7e3569370'
[    1.876799] zswap: loaded using pool lzo/zbud
[    1.877047] Key type ._fscrypt registered
[    1.877050] Key type .fscrypt registered
[    1.877052] Key type fscrypt-provisioning registered
[    1.878742] Btrfs loaded, crc32c=crc32c-generic
[    1.878801] Key type big_key registered
[    1.888831] Key type encrypted registered
[    1.888844] AppArmor: AppArmor sha1 policy hashing enabled
[    1.905346] clk: Not disabling unused clocks
[    1.905716] Freeing unused kernel memory: 1088K
[    1.940968] Run /init as init process
[    1.940973]   with arguments:
[    1.940976]     /init
[    1.940978]   with environment:
[    1.940981]     HOME=/
[    1.940983]     TERM=linux
[    1.940985]     hdmimode=1080p60hz
[    1.940987]     cvbsmode=576cvbs
[    1.940989]     max_freq_a53=1896
[    1.940990]     max_freq_a73=1800
[    1.940993]     voutmode=hdmi
[    1.940995]     disablehpd=false
[    1.940996]     cvbscable=
[    1.940998]     overscan=100
[    2.107478] 5V: supplied by 12V
[    2.108138] HUB_5V: supplied by 5V
[    2.108355] USB_PWR_EN: supplied by 5V
[    2.108696] VDDAO_3V3: supplied by 12V
[    2.110344] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    2.119430] pwm-regulator: supplied by regulator-dummy
[    2.119575] VCC_3V3: supplied by VDDAO_3V3
[    2.119600] FLASH_1V8: supplied by VCC_3V3
[    2.119642] VCC_1V8: supplied by VCC_3V3
[    2.119669] VDDAO_1V8: supplied by VDDAO_3V3
[    2.119809] pwm-regulator: supplied by regulator-dummy
[    2.122097] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    2.122102] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    2.122179] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    2.122185] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    2.122766] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    2.122772] meson8b-dwmac ff3f0000.ethernet:         DWMAC1000
[    2.122777] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    2.122780] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    2.122783] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    2.122786] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    2.122789] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    2.122809] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    2.122812] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    2.122815] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.123174] libphy: stmmac: probed
[    2.141093] meson-vrtc ff8000a8.rtc: registered as rtc0
[    2.141116] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[    2.141662] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    2.170212] libphy: mdio_mux: probed
[    2.194477] mmc0: new high speed SDHC card at address b368
[    2.195271] mmcblk0: mmc0:b368 CBADS 30.0 GiB
[    2.197267]  mmcblk0: p1
[    2.225569] libphy: mdio_mux: probed
[    2.237147] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    2.237154] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    2.240001] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[    2.240042] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[    2.240186] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    2.241063] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.241079] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.241190] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    2.241221] xhci-hcd xhci-hcd.1.auto: irq 28, io mem 0xff500000
[    2.241408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    2.241412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.241416] usb usb1: Product: xHCI Host Controller
[    2.241420] usb usb1: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.241423] usb usb1: SerialNumber: xhci-hcd.1.auto
[    2.241796] hub 1-0:1.0: USB hub found
[    2.241817] hub 1-0:1.0: 2 ports detected
[    2.242039] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.242048] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.242056] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.242089] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.242148] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[    2.242152] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.242156] usb usb2: Product: xHCI Host Controller
[    2.242159] usb usb2: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.242163] usb usb2: SerialNumber: xhci-hcd.1.auto
[    2.242422] hub 2-0:1.0: USB hub found
[    2.242438] hub 2-0:1.0: 1 port detected
[    2.242863] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
[    2.245667] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.245708] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.347532] random: fast init done
[    2.504358] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    2.580906] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.731265] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[    2.731271] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.731274] usb 1-1: Product: USB2.1 Hub
[    2.731276] usb 1-1: Manufacturer: GenesysLogic
[    2.786300] hub 1-1:1.0: USB hub found
[    2.786545] hub 1-1:1.0: 4 ports detected
[    2.857028] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.879509] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[    2.879513] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.879516] usb 2-1: Product: USB3.1 Hub
[    2.879519] usb 2-1: Manufacturer: GenesysLogic
[    2.898316] hub 2-1:1.0: USB hub found
[    2.898606] hub 2-1:1.0: 4 ports detected
[    3.160914] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd
[    3.267462] systemd[1]: System time before build time, advancing clock.
[    3.283211] systemd[1]: Inserted module 'autofs4'
[    3.298252] usb 1-1.1: New USB device found, idVendor=045e, idProduct=008a, bcdDevice=73.73
[    3.298257] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.298260] usb 1-1.1: Product: Microsoft Wireless Optical Desktop® 1.00
[    3.298263] usb 1-1.1: Manufacturer: Microsoft
[    3.341588] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.341815] systemd[1]: Detected architecture arm64.
[    3.366832] systemd[1]: Set hostname to <odroidn2>.
[    3.398998] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:008A.0001/input/input0
[    3.457298] hid-generic 0003:045E:008A.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input0
[    3.479649] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input1
[    3.479873] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input2
[    3.537224] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input3
[    3.537357] hid-generic 0003:045E:008A.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input1
[    3.660986] random: systemd: uninitialized urandom read (16 bytes read)
[    3.664293] random: systemd: uninitialized urandom read (16 bytes read)
[    3.664551] systemd[1]: Listening on Journal Socket.
[    3.664942] random: systemd: uninitialized urandom read (16 bytes read)
[    3.665136] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.665269] systemd[1]: Reached target Swap.
[    3.665476] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.668416] systemd[1]: Starting Restore / save the current clock...
[    3.670130] systemd[1]: Starting Nameserver information manager...
[    3.670832] systemd[1]: Created slice User and Session Slice.
[    3.741485] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    4.033026] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.053801] usb 2-1.3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    4.053808] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    4.053811] usb 2-1.3: Product: Ugreen Storage Device
[    4.053814] usb 2-1.3: Manufacturer: Ugreen
[    4.053817] usb 2-1.3: SerialNumber: 022003254669
[    4.241904] zram: Added device: zram0
[    4.242235] zram: Added device: zram1
[    4.243102] zram: Added device: zram2
[    4.296743] zram1: detected capacity change from 0 to 1073741824
[    4.564010] mc: Linux media interface: v0.10
[    4.618581] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    4.644910] Registered IR keymap rc-odroid
[    4.649741] videodev: Linux video capture interface: v2.00
[    4.680096] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    4.682108] IR NEC protocol handler initialized
[    4.700976] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.701027] meson-drm ff900000.vpu: CVBS Output connector not available
[    4.712977] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    4.713049] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    4.713109] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input4
[    4.713243] meson-ir ff808000.ir: receiver initialized
[    4.725746] scsi host0: uas
[    4.727246] usbcore: registered new interface driver uas
[    4.728945] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    4.729232] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    4.729404] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[    4.729599] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    4.729650] meson-drm ff900000.vpu: [drm] Cannot find any crtc or sizes
[    4.743758] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    4.840341] scsi 0:0:0:0: Direct-Access     FUJITSU  MHZ2160BH G2     0    PQ: 0 ANSI: 6
[    4.841568] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.841691] sd 0:0:0:0: [sda] Write Protect is off
[    4.841696] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.841876] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.842085] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    4.849327] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.931269]  sda: sda1
[    4.932425] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.254687] BTRFS: device fsid 3ff93dac-88d4-4f43-a4db-5ec6593bbba8 devid 1 transid 874 /dev/sda1 scanned by systemd-udevd (1547)
[    5.372910] Adding 1048572k swap on /dev/zram1.  Priority:5 extents:1 across:1048572k SSFS
[    5.445062] zram0: detected capacity change from 0 to 52428800
[    7.523682] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[    7.523699] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[    8.544403] systemd[1]: Started Armbian memory supported logging.
[    8.548436] systemd[1]: Starting Journal Service...
[    8.611113] systemd[1]: Started Journal Service.
[    8.633386] systemd-journald[1668]: Received request to flush runtime journal from PID 1
[    8.856385] random: crng init done
[    8.856402] random: 7 urandom warning(s) missed due to ratelimiting
[   12.321838] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   12.323980] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[   12.323988] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[   12.323993] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[   16.022887] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   16.022923] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.038595] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
[   16.086023] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   16.189850] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
[   16.189861] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[   16.189868] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
[   21.380899] Console: switching to colour frame buffer device 240x67
[   21.444931] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
[   33.763835] USB_PWR_EN: disabling
So I'm sure if you disconnect all of your other devices, it will not work for you either.
I'll have a look at the tuner next now I have a connection.

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

So I'm sure if you disconnect all of your other devices, it will not work for you either.
Interesting find - I will try to recreate when possible. In any case, on bleeding edge kernels, troubles like this are more then expected. I would certainly suggest not to use those kernels for anything else than playing around and be prepared ... making kernels stable takes some time.
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Having said all of the above, I left the RT8152B connected but connected the network cable to the onboard ethernet and rebooted:

Code: Select all

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.7.6-meson64 (root@stable) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk.20 SMP PREEMPT Sat Jun 27 18:03:14 UTC 2020
[    0.000000] Machine model: Hardkernel ODROID-N2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000b5800000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xb5036100-0xb5037fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ed7fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005300000-0x00000000ed7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ed7fffff]
[    0.000000] On node 0 totalpages: 972032
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261376 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11104 pages used for memmap
[    0.000000]   DMA32 zone: 710656 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54168 r8192 d31848 u94208
[    0.000000] pcpu-alloc: s54168 r8192 d31848 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956832
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=8964d5d7-4a03-47dd-9d2e-6c6a58d278f4 rootwait  rootflags=data=writeback rw clk_ignore_unused rootfstype=ext4 console=ttyAML0,115200n8 console=tty1 loglevel=1  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=custombuilt cvbsmode=576cvbs max_freq_a53=1896 max_freq_a73=1800 maxcpus=6 voutmode=hdmi modeline=1920,1080,148500,56250,50,1920,2448,2492,2640,1080,1084,1089,1125,1,1,1 disablehpd=false cvbscable= overscan=100
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x38abe000-0x3cabe000] (64MB)
[    0.000000] Memory: 2788748K/3888128K available (13628K kernel code, 1254K rwdata, 5456K rodata, 1088K init, 584K bss, 181876K reserved, 917504K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] random: get_random_bytes called from start_kernel+0x35c/0x528 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000269] Console: colour dummy device 80x25
[    0.000280] printk: console [tty1] enabled
[    0.000364] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000372] pid_max: default: 32768 minimum: 301
[    0.000461] LSM: Security Framework initializing
[    0.000483] Yama: becoming mindful.
[    0.000565] AppArmor: AppArmor initialized
[    0.000616] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000633] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002430] rcu: Hierarchical SRCU implementation.
[    0.005787] EFI services will not be available.
[    0.006198] smp: Bringing up secondary CPUs ...
[    0.006830] Detected VIPT I-cache on CPU1
[    0.006880] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.008056] CPU features: detected: ARM erratum 858921
[    0.008064] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.008072] Detected VIPT I-cache on CPU2
[    0.008096] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008111] arch_timer: CPU2: Trapping CNTVCT access
[    0.008119] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[    0.008782] Detected VIPT I-cache on CPU3
[    0.008797] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.008804] arch_timer: CPU3: Trapping CNTVCT access
[    0.008810] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[    0.009411] Detected VIPT I-cache on CPU4
[    0.009426] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.009433] arch_timer: CPU4: Trapping CNTVCT access
[    0.009439] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[    0.010056] Detected VIPT I-cache on CPU5
[    0.010071] arch_timer: Enabling local workaround for ARM erratum 858921
[    0.010078] arch_timer: CPU5: Trapping CNTVCT access
[    0.010083] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[    0.010157] smp: Brought up 1 node, 6 CPUs
[    0.010163] SMP: Total of 6 processors activated.
[    0.010169] CPU features: detected: 32-bit EL0 Support
[    0.010174] CPU features: detected: CRC32 instructions
[    0.021338] CPU: All CPU(s) started at EL2
[    0.021386] alternatives: patching kernel code
[    0.023264] devtmpfs: initialized
[    0.030157] Registered cp15_barrier emulation handler
[    0.030167] Registered setend emulation handler
[    0.030398] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.030434] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.043731] xor: measuring software checksum speed
[    0.079925]    8regs     :  3323.000 MB/sec
[    0.119961]    32regs    :  3853.000 MB/sec
[    0.160001]    arm64_neon:  3576.000 MB/sec
[    0.160004] xor: using function: 32regs (3853.000 MB/sec)
[    0.160012] pinctrl core: initialized pinctrl subsystem
[    0.160685] thermal_sys: Registered thermal governor 'fair_share'
[    0.160688] thermal_sys: Registered thermal governor 'bang_bang'
[    0.160692] thermal_sys: Registered thermal governor 'step_wise'
[    0.160694] thermal_sys: Registered thermal governor 'user_space'
[    0.161097] DMI not present or invalid.
[    0.161468] NET: Registered protocol family 16
[    0.162799] DMA: preallocated 256 KiB pool for atomic allocations
[    0.162808] audit: initializing netlink subsys (disabled)
[    0.162911] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[    0.164276] cpuidle: using governor menu
[    0.164618] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.164727] ASID allocator initialised with 65536 entries
[    0.165661] Serial: AMBA PL011 UART driver
[    0.178467] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.178476] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.178480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.178485] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.180777] cryptd: max_cpu_qlen set to 1000
[    0.248185] raid6: neonx8   gen()  2800 MB/s
[    0.316254] raid6: neonx8   xor()  2041 MB/s
[    0.384304] raid6: neonx4   gen()  3154 MB/s
[    0.452372] raid6: neonx4   xor()  2399 MB/s
[    0.520441] raid6: neonx2   gen()  2570 MB/s
[    0.588500] raid6: neonx2   xor()  2184 MB/s
[    0.656566] raid6: neonx1   gen()  2071 MB/s
[    0.724632] raid6: neonx1   xor()  1729 MB/s
[    0.792702] raid6: int64x8  gen()  1375 MB/s
[    0.860793] raid6: int64x8  xor()   736 MB/s
[    0.928893] raid6: int64x4  gen()  1665 MB/s
[    0.996967] raid6: int64x4  xor()   848 MB/s
[    1.065023] raid6: int64x2  gen()  1361 MB/s
[    1.133077] raid6: int64x2  xor()   619 MB/s
[    1.201143] raid6: int64x1  gen()  1126 MB/s
[    1.269202] raid6: int64x1  xor()   462 MB/s
[    1.269204] raid6: using algorithm neonx4 gen() 3154 MB/s
[    1.269206] raid6: .... xor() 2399 MB/s, rmw enabled
[    1.269209] raid6: using neon recovery algorithm
[    1.269763] ACPI: Interpreter disabled.
[    1.270032] iommu: Default domain type: Translated
[    1.270139] vgaarb: loaded
[    1.270887] SCSI subsystem initialized
[    1.271127] usbcore: registered new interface driver usbfs
[    1.271156] usbcore: registered new interface driver hub
[    1.271217] usbcore: registered new device driver usb
[    1.271419] pps_core: LinuxPPS API ver. 1 registered
[    1.271421] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.271442] PTP clock support registered
[    1.271577] EDAC MC: Ver: 3.0.0
[    1.272457] NetLabel: Initializing
[    1.272460] NetLabel:  domain hash size = 128
[    1.272462] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.272498] NetLabel:  unlabeled traffic allowed by default
[    1.272950] clocksource: Switched to clocksource arch_sys_counter
[    1.273185] VFS: Disk quotas dquot_6.6.0
[    1.273229] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.273565] AppArmor: AppArmor Filesystem Enabled
[    1.273607] pnp: PnP ACPI: disabled
[    1.278715] NET: Registered protocol family 2
[    1.279092] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.279164] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.279419] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.279605] TCP: Hash tables configured (established 32768 bind 32768)
[    1.279868] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.279914] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.280066] NET: Registered protocol family 1
[    1.280083] PCI: CLS 0 bytes, default 64
[    1.280196] Trying to unpack rootfs image as initramfs...
[    1.818793] Freeing initrd memory: 13572K
[    1.819625] kvm [1]: IPA Size Limit: 40bits
[    1.820121] kvm [1]: vgic interrupt IRQ1
[    1.820249] kvm [1]: Hyp mode initialized successfully
[    1.823985] Initialise system trusted keyrings
[    1.824011] Key type blacklist registered
[    1.824100] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.827980] zbud: loaded
[    1.829020] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.829537] fuse: init (API version 7.31)
[    1.830405] integrity: Platform Keyring initialized
[    1.840620] Key type asymmetric registered
[    1.840623] Asymmetric key parser 'x509' registered
[    1.840650] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.840787] io scheduler mq-deadline registered
[    1.840789] io scheduler kyber registered
[    1.840871] io scheduler bfq registered
[    1.843062] GPIO line 447 (usb-hub-reset) hogged as output/high
[    1.845579] EINJ: ACPI disabled.
[    1.851068] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
[    1.852196] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.853947] Serial: AMBA driver
[    1.854276] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.854309] printk: console [ttyAML0] enabled
[    1.859179] loop: module loaded
[    1.861152] libphy: Fixed MDIO Bus: probed
[    1.861529] tun: Universal TUN/TAP device driver, 1.6
[    1.862099] thunder_xcv, ver 1.0
[    1.862129] thunder_bgx, ver 1.0
[    1.862153] nicpf, ver 1.0
[    1.862512] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.862514] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.862539] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.862542] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.862567] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.862569] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.862674] sky2: driver version 1.30
[    1.862954] VFIO - User Level meta-driver version: 0.3
[    1.864227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.864239] ehci-pci: EHCI PCI platform driver
[    1.864266] ehci-platform: EHCI generic platform driver
[    1.864370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.864377] ohci-pci: OHCI PCI platform driver
[    1.864405] ohci-platform: OHCI generic platform driver
[    1.864735] usbcore: registered new interface driver usb-storage
[    1.865881] mousedev: PS/2 mouse device common for all mice
[    1.866172] i2c /dev entries driver
[    1.868001] sdhci: Secure Digital Host Controller Interface driver
[    1.868005] sdhci: Copyright(c) Pierre Ossman
[    1.868133] Synopsys Designware Multimedia Card Interface Driver
[    1.869505] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.870314] ledtrig-cpu: registered to indicate activity on CPUs
[    1.870635] meson-sm: secure-monitor enabled
[    1.870825] hid: raw HID events driver (C) Jiri Kosina
[    1.870929] usbcore: registered new interface driver usbhid
[    1.870931] usbhid: USB HID core driver
[    1.872219] NET: Registered protocol family 10
[    1.872865] Segment Routing with IPv6
[    1.872919] NET: Registered protocol family 17
[    1.873006] 8021q: 802.1Q VLAN Support v1.8
[    1.873037] Key type dns_resolver registered
[    1.873475] registered taskstats version 1
[    1.873480] Loading compiled-in X.509 certificates
[    1.876559] Loaded X.509 cert 'Build time autogenerated kernel key: 43faf3d3e8e41402c77ad5248011bde7e3569370'
[    1.876664] zswap: loaded using pool lzo/zbud
[    1.876876] Key type ._fscrypt registered
[    1.876879] Key type .fscrypt registered
[    1.876881] Key type fscrypt-provisioning registered
[    1.878559] Btrfs loaded, crc32c=crc32c-generic
[    1.878623] Key type big_key registered
[    1.888335] Key type encrypted registered
[    1.888349] AppArmor: AppArmor sha1 policy hashing enabled
[    1.904534] clk: Not disabling unused clocks
[    1.904905] Freeing unused kernel memory: 1088K
[    1.941094] Run /init as init process
[    1.941099]   with arguments:
[    1.941102]     /init
[    1.941104]   with environment:
[    1.941106]     HOME=/
[    1.941108]     TERM=linux
[    1.941110]     hdmimode=custombuilt
[    1.941112]     cvbsmode=576cvbs
[    1.941114]     max_freq_a53=1896
[    1.941116]     max_freq_a73=1800
[    1.941118]     voutmode=hdmi
[    1.941121]     modeline=1920,1080,148500,56250,50,1920,2448,2492,2640,1080,1084,1089,1125,1,1,1
[    1.941122]     disablehpd=false
[    1.941124]     cvbscable=
[    1.941126]     overscan=100
[    2.124281] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    2.124390] 5V: supplied by 12V
[    2.124982] HUB_5V: supplied by 5V
[    2.125193] USB_PWR_EN: supplied by 5V
[    2.125506] VDDAO_3V3: supplied by 12V
[    2.135387] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    2.135396] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    2.135501] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    2.135509] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    2.142487] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    2.142497] meson8b-dwmac ff3f0000.ethernet:         DWMAC1000
[    2.142502] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    2.142505] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    2.142508] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    2.142511] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    2.142514] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    2.142541] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    2.142545] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    2.142548] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.142851] libphy: stmmac: probed
[    2.147277] meson-vrtc ff8000a8.rtc: registered as rtc0
[    2.147582] pwm-regulator: supplied by regulator-dummy
[    2.147830] VCC_3V3: supplied by VDDAO_3V3
[    2.147873] FLASH_1V8: supplied by VCC_3V3
[    2.147917] VCC_1V8: supplied by VCC_3V3
[    2.147999] VDDAO_1V8: supplied by VDDAO_3V3
[    2.148347] pwm-regulator: supplied by regulator-dummy
[    2.149128] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[    2.153783] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    2.182051] libphy: mdio_mux: probed
[    2.206592] mmc0: new high speed SDHC card at address b368
[    2.207433] mmcblk0: mmc0:b368 CBADS 30.0 GiB
[    2.209362]  mmcblk0: p1
[    2.241198] libphy: mdio_mux: probed
[    2.250129] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    2.250135] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    2.252850] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[    2.252888] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[    2.253069] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    2.253830] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.253846] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.253954] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    2.253988] xhci-hcd xhci-hcd.1.auto: irq 28, io mem 0xff500000
[    2.254182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[    2.254187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.254191] usb usb1: Product: xHCI Host Controller
[    2.254194] usb usb1: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.254198] usb usb1: SerialNumber: xhci-hcd.1.auto
[    2.254545] hub 1-0:1.0: USB hub found
[    2.254566] hub 1-0:1.0: 2 ports detected
[    2.254775] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.254783] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.254801] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.254837] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.254889] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[    2.254894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.254897] usb usb2: Product: xHCI Host Controller
[    2.254900] usb usb2: Manufacturer: Linux 5.7.6-meson64 xhci-hcd
[    2.254903] usb usb2: SerialNumber: xhci-hcd.1.auto
[    2.255224] hub 2-0:1.0: USB hub found
[    2.255240] hub 2-0:1.0: 1 port detected
[    2.258611] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
[    2.258656] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
[    2.375319] random: fast init done
[    2.489494] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: data=writeback
[    2.588963] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.739299] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[    2.739304] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.739307] usb 1-1: Product: USB2.1 Hub
[    2.739309] usb 1-1: Manufacturer: GenesysLogic
[    2.799063] hub 1-1:1.0: USB hub found
[    2.799288] hub 1-1:1.0: 4 ports detected
[    2.865070] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.887540] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[    2.887544] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.887547] usb 2-1: Product: USB3.1 Hub
[    2.887550] usb 2-1: Manufacturer: GenesysLogic
[    2.911110] hub 2-1:1.0: USB hub found
[    2.911406] hub 2-1:1.0: 4 ports detected
[    3.012964] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[    3.161163] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    3.161168] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.161170] usb 1-2: Product: USB 2.0 Hub
[    3.214959] hub 1-2:1.0: USB hub found
[    3.214994] hub 1-2:1.0: 4 ports detected
[    3.251025] systemd[1]: System time before build time, advancing clock.
[    3.264957] usb 1-1.1: new low-speed USB device number 4 using xhci-hcd
[    3.266794] systemd[1]: Inserted module 'autofs4'
[    3.328137] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.328516] systemd[1]: Detected architecture arm64.
[    3.363825] systemd[1]: Set hostname to <odroidn2>.
[    3.398492] usb 1-1.1: New USB device found, idVendor=045e, idProduct=008a, bcdDevice=73.73
[    3.398497] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.398500] usb 1-1.1: Product: Microsoft Wireless Optical Desktop® 1.00
[    3.398502] usb 1-1.1: Manufacturer: Microsoft
[    3.474767] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:008A.0001/input/input0
[    3.533243] hid-generic 0003:045E:008A.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input0
[    3.554671] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input1
[    3.554817] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input2
[    3.613132] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:008A.0002/input/input3
[    3.613229] hid-generic 0003:045E:008A.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-xhci-hcd.1.auto-1.1/input1
[    3.620962] usb 1-2.4: new high-speed USB device number 5 using xhci-hcd
[    3.660114] random: systemd: uninitialized urandom read (16 bytes read)
[    3.663446] random: systemd: uninitialized urandom read (16 bytes read)
[    3.663617] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.663826] random: systemd: uninitialized urandom read (16 bytes read)
[    3.663843] systemd[1]: Reached target System Time Synchronized.
[    3.664239] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.664588] systemd[1]: Listening on Journal Audit Socket.
[    3.664797] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.665079] systemd[1]: Listening on Journal Socket.
[    3.665186] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    3.760985] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    3.825600] usb 1-2.4: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    3.825605] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.825608] usb 1-2.4: Product: USB 10/100 LAN
[    3.825610] usb 1-2.4: Manufacturer: Realtek
[    3.825612] usb 1-2.4: SerialNumber: 00E04C360F18
[    4.001057] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.021864] usb 2-1.3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    4.021872] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    4.021875] usb 2-1.3: Product: Ugreen Storage Device
[    4.021877] usb 2-1.3: Manufacturer: Ugreen
[    4.021880] usb 2-1.3: SerialNumber: 022003254669
[    4.247527] zram: Added device: zram0
[    4.247756] zram: Added device: zram1
[    4.247937] zram: Added device: zram2
[    4.323247] zram1: detected capacity change from 0 to 1073741824
[    4.629528] mc: Linux media interface: v0.10
[    4.633631] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    4.657209] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[    4.672965] Registered IR keymap rc-odroid
[    4.692822] videodev: Linux video capture interface: v2.00
[    4.694727] IR NEC protocol handler initialized
[    4.709141] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.709194] meson-drm ff900000.vpu: CVBS Output connector not available
[    4.721120] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[    4.721331] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    4.721464] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input4
[    4.721745] meson-ir ff808000.ir: receiver initialized
[    4.731624] scsi host0: uas
[    4.733044] usbcore: registered new interface driver uas
[    4.736996] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    4.737275] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    4.737470] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[    4.737671] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    4.763492] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    4.819266] scsi 0:0:0:0: Direct-Access     FUJITSU  MHZ2160BH G2     0    PQ: 0 ANSI: 6
[    4.820598] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.820759] sd 0:0:0:0: [sda] Write Protect is off
[    4.820765] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.821034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.821269] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    4.830249] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.887978]  sda: sda1
[    4.889171] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.910928] usb 1-2.4: reset high-speed USB device number 5 using xhci-hcd
[    5.017166] Console: switching to colour frame buffer device 240x67
[    5.044503] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
[    5.161643] r8152 1-2.4:1.0: skip request firmware
[    5.189747] r8152 1-2.4:1.0 eth1: v1.11.11
[    5.192469] usbcore: registered new interface driver r8152
[    5.205626] usbcore: registered new interface driver cdc_ether
[    5.212107] BTRFS: device fsid 3ff93dac-88d4-4f43-a4db-5ec6593bbba8 devid 1 transid 874 /dev/sda1 scanned by systemd-udevd (1554)
[    5.408955] Adding 1048572k swap on /dev/zram1.  Priority:5 extents:1 across:1048572k SSFS
[    5.481188] zram0: detected capacity change from 0 to 52428800
[    7.571504] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[    7.571521] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[    8.600936] systemd[1]: Started Armbian memory supported logging.
[    8.605126] systemd[1]: Starting Journal Service...
[    8.672920] systemd[1]: Started Journal Service.
[    8.694082] systemd-journald[1715]: Received request to flush runtime journal from PID 1
[    9.033325] random: crng init done
[    9.033339] random: 7 urandom warning(s) missed due to ratelimiting
[   11.913923] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   11.916244] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[   11.916253] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[   11.916260] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[   15.744896] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.744928] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.758222] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
[   15.809371] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=25)
[   15.913703] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
[   15.913713] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[   15.913720] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
Still the same.

Reconnected the ethernet cable the the (connected) RT8152B:

Code: Select all

[  309.359797] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  309.360397] r8152 1-2.4:1.0 eth1: carrier on
So it may look like it will work, but it doesn't.

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

I've just finished having a look at TVHeadend to see if it works on the nightly build.

On both USB3, and USB2 (Via the ADP005 USB Hub with RT8152B to get network connection) the 292e is correctly found and the firmware files from the first post are loaded correctly with no errors.

When scanning the muxes, depending on what else is connected to the USB3 depends on how many services are found, and how stable (glitching in the stream), they are. I have a keyboard/mouse and HDD connected via the USB3.
The more I remove, the better in gets:
USB3
31 - 164 services
USB2
121 - 164 services

igorpec
Posts: 800
Joined: Sat Dec 12, 2015 4:34 pm
languages_spoken: english,german,slovene
ODROIDs: XU4, HC1, C2, C1+
Has thanked: 43 times
Been thanked: 114 times
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by igorpec »

Badger101 wrote:
Wed Jul 01, 2020 1:43 am
I've just finished having a look at TVHeadend to see if it works on the nightly build.

On both USB3, and USB2 (Via the ADP005 USB Hub with RT8152B to get network connection) the 292e is correctly found and the firmware files from the first post are loaded correctly with no errors.

When scanning the muxes, depending on what else is connected to the USB3 depends on how many services are found, and how stable (glitching in the stream), they are. I have a keyboard/mouse and HDD connected via the USB3.
The more I remove, the better in gets:
USB3
31 - 164 services
USB2
121 - 164 services
USB glitches are (known issue) and probably present on all kernels for N2. Dunno if there is any software fix for this available ATM. Check forums if there is at least some workaround ...
ARMBIAN
Linux for ARM development boards
What is Armbian?

Badger101
Posts: 17
Joined: Sat May 25, 2019 12:16 am
languages_spoken: english
Has thanked: 0
Been thanked: 1 time
Contact:

Re: Armbian TVHeadend using a PCTV 292e

Post by Badger101 »

Hi igorpec,

Thank you for your replies, and sticking with this thread. It looks like my initial concerns were correct then:
Badger101 wrote:
Sat Jun 27, 2020 11:54 pm
The hardware (N2) seems very capable and powerful, however I'm loosing confidence in the software. I purchased the N2 to take over from an old Windows file sever, so it will be running OMV (probably), Plex, Transmission TVHeadend, and my Home Automation which I will need access to the GPIO/SPI to talk to a RFM96. I think the N2 is more that capable to do this.
It also needs to be stable and reliable.

From my tests, using Armbian 5.6 Kernel it looks like the tuner problems in post #1, and #2 have highlighted that there are issues with the USB which I thought had been fixed? - I will need multiple HDD's on the USB ports.
Going back to Armbian 4.9 kernel BTRFS looks like it is broken (post #4), and I'm not really sure what is wrong with the tuner (post #5).

Using CoreELEC on the N2 is a pleasure and hats off to the guys who have done this! so eventually I will need another N2 if these issues are fixed.

Are my conclusions above correct, or have I missed something very obvious (which is totally possible :) )
In my mind these are fundamental things which should work correctly.
Also with the latest 5.7.6 the onboard ethernet is broken with possible USB issues still.
I havn't even looked into the GPIO/SPI yet, but I'm unsure if it is worth my time.

While I totally appeciate the time it takes to develop these things, personally I think that this should be a priority of HardKernel/AMlogic to get these fixes/patches in place to help the development of Armbian/MainLine. I think this is fundamental if you these boards in an industrial (stable/reliable) environment, and not just for tinkering with.

Post Reply

Return to “Other OS”

Who is online

Users browsing this forum: No registered users and 2 guests